From 8d82f219c2d476811cd3157a39c7b5c1f045ebc3 Mon Sep 17 00:00:00 2001 From: Eric Benard Date: Thu, 12 Jan 2012 06:10:28 +0000 Subject: [PATCH] net: fsl: fec: handle 10Mbps speed in RMII mode MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit when the link is 10 Mbps and the mode is RMII, it's necessary to set FRCONT to 1 in MIIGSK_CFGR to divide the RMII source clock by 10 in order to support 10 Mbps operations. Signed-off-by: Eric Bénard Acked-by: Shawn Guo Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 9 ++++++--- drivers/net/ethernet/freescale/fec.h | 4 ++++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 236cc892ec3e..7b25e9cf13f6 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -476,6 +476,7 @@ fec_restart(struct net_device *ndev, int duplex) } else { #ifdef FEC_MIIGSK_ENR if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) { + u32 cfgr; /* disable the gasket and wait */ writel(0, fep->hwp + FEC_MIIGSK_ENR); while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) @@ -486,9 +487,11 @@ fec_restart(struct net_device *ndev, int duplex) * RMII, 50 MHz, no loopback, no echo * MII, 25 MHz, no loopback, no echo */ - writel((fep->phy_interface == PHY_INTERFACE_MODE_RMII) ? - 1 : 0, fep->hwp + FEC_MIIGSK_CFGR); - + cfgr = (fep->phy_interface == PHY_INTERFACE_MODE_RMII) + ? BM_MIIGSK_CFGR_RMII : BM_MIIGSK_CFGR_MII; + if (fep->phy_dev && fep->phy_dev->speed == SPEED_10) + cfgr |= BM_MIIGSK_CFGR_FRCONT_10M; + writel(cfgr, fep->hwp + FEC_MIIGSK_CFGR); /* re-enable the gasket */ writel(2, fep->hwp + FEC_MIIGSK_ENR); diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 8b2c6d797e6d..8408c627b195 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -47,6 +47,10 @@ #define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */ #define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */ +#define BM_MIIGSK_CFGR_MII 0x00 +#define BM_MIIGSK_CFGR_RMII 0x01 +#define BM_MIIGSK_CFGR_FRCONT_10M 0x40 + #else #define FEC_ECNTRL 0x000 /* Ethernet control reg */ -- 2.30.2