From 8d169aa00d0356f915e84dbdf6c9be381cce34a4 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Tue, 22 Nov 2011 17:21:52 -0800 Subject: [PATCH] brcm80211: fmac: move busstate to struct brcmf_bus busstate keeps track of the bus (USB/SDIO) status and is used by both generic layer and bus layer. Move it to brcmf_bus helps to clean up the interface. This patch is part of fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Alwin Beukers Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 6 +-- .../net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 2 +- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 18 ++++---- .../wireless/brcm80211/brcmfmac/dhd_sdio.c | 42 ++++++++++--------- 4 files changed, 37 insertions(+), 31 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index a557971044bc..a104b74e0004 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -574,6 +574,7 @@ struct brcmf_dcmd { struct brcmf_bus { u8 type; /* bus type */ void *bus_priv; /* pointer to bus private structure */ + enum brcmf_bus_state state; }; /* Forward decls for struct brcmf_pub (see below) */ @@ -586,6 +587,7 @@ struct brcmf_cfg80211_dev; /* cfg80211 device info */ struct brcmf_pub { /* Linkage ponters */ struct brcmf_sdio *bus; + struct brcmf_bus *bus_if; struct brcmf_proto *prot; struct brcmf_info *info; struct brcmf_cfg80211_dev *config; @@ -593,7 +595,6 @@ struct brcmf_pub { /* Internal brcmf items */ bool up; /* Driver up/down (to OS) */ bool txoff; /* Transmit flow-controlled */ - enum brcmf_bus_state busstate; uint hdrlen; /* Total BRCMF header length (proto + bus) */ uint maxctl; /* Max size rxctl request from proto to bus */ uint rxsz; /* Rx buffer size bus module should use */ @@ -661,7 +662,6 @@ struct brcmf_pub { u8 country_code[BRCM_CNTRY_BUF_SZ]; char eventmask[BRCMF_EVENTING_MASK_LEN]; - }; struct brcmf_if_event { @@ -687,7 +687,7 @@ extern uint brcmf_c_mkiovar(char *name, char *data, uint datalen, * bus_hdrlen specifies required headroom for bus module header. */ extern struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus, - uint bus_hdrlen); + uint bus_hdrlen, struct device *dev); extern int brcmf_net_attach(struct brcmf_pub *drvr, int idx); extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index e34c5c3d1d55..8e46bc64ca5f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -280,7 +280,7 @@ brcmf_proto_dcmd(struct brcmf_pub *drvr, int ifidx, struct brcmf_dcmd *dcmd, struct brcmf_proto *prot = drvr->prot; int ret = -1; - if (drvr->busstate == BRCMF_BUS_DOWN) { + if (drvr->bus_if->state == BRCMF_BUS_DOWN) { brcmf_dbg(ERROR, "bus is down. we have nothing to do.\n"); return ret; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e8f7f78f52cc..c13b30f6d220 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -292,7 +292,7 @@ int brcmf_sendpkt(struct brcmf_pub *drvr, int ifidx, struct sk_buff *pktbuf) struct brcmf_info *drvr_priv = drvr->info; /* Reject if down */ - if (!drvr->up || (drvr->busstate == BRCMF_BUS_DOWN)) + if (!drvr->up || (drvr->bus_if->state == BRCMF_BUS_DOWN)) return -ENODEV; /* Update multicast statistic */ @@ -322,9 +322,11 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) brcmf_dbg(TRACE, "Enter\n"); /* Reject if down */ - if (!drvr_priv->pub.up || (drvr_priv->pub.busstate == BRCMF_BUS_DOWN)) { - brcmf_dbg(ERROR, "xmit rejected pub.up=%d busstate=%d\n", - drvr_priv->pub.up, drvr_priv->pub.busstate); + if (!drvr_priv->pub.up || + (drvr_priv->pub.bus_if->state == BRCMF_BUS_DOWN)) { + brcmf_dbg(ERROR, "xmit rejected pub.up=%d state=%d\n", + drvr_priv->pub.up, + drvr_priv->pub.bus_if->state); netif_stop_queue(ndev); return -ENODEV; } @@ -761,7 +763,7 @@ s32 brcmf_exec_dcmd(struct net_device *ndev, u32 cmd, void *arg, u32 len) buflen = min_t(uint, dcmd.len, BRCMF_DCMD_MAXLEN); /* send to dongle (must be up, and wl) */ - if ((drvr_priv->pub.busstate != BRCMF_BUS_DATA)) { + if ((drvr_priv->pub.bus_if->state != BRCMF_BUS_DATA)) { brcmf_dbg(ERROR, "DONGLE_DOWN\n"); err = -EIO; goto done; @@ -940,7 +942,8 @@ void brcmf_del_if(struct brcmf_info *drvr_priv, int ifidx) } } -struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus, uint bus_hdrlen) +struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus, uint bus_hdrlen, + struct device *dev) { struct brcmf_info *drvr_priv = NULL; @@ -959,6 +962,7 @@ struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus, uint bus_hdrlen) /* Link to bus module */ drvr_priv->pub.bus = bus; drvr_priv->pub.hdrlen = bus_hdrlen; + drvr_priv->pub.bus_if = dev_get_drvdata(dev); /* Attach and link in the protocol */ if (brcmf_proto_attach(&drvr_priv->pub) != 0) { @@ -995,7 +999,7 @@ int brcmf_bus_start(struct brcmf_pub *drvr) } /* If bus is not ready, can't come up */ - if (drvr_priv->pub.busstate != BRCMF_BUS_DATA) { + if (drvr_priv->pub.bus_if->state != BRCMF_BUS_DATA) { brcmf_dbg(ERROR, "failed bus is not ready\n"); return -ENODEV; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 9ab906a91c48..7c8b5f77042c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1068,7 +1068,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) /* If we can't reach the device, signal failure */ if (err || brcmf_sdcard_regfail(bus->sdiodev)) - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; } /* copy a buffer into a pkt buffer chain */ @@ -1714,7 +1714,8 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished) *finished = false; for (rxseq = bus->rx_seq, rxleft = maxframes; - !bus->rxskip && rxleft && bus->drvr->busstate != BRCMF_BUS_DOWN; + !bus->rxskip && rxleft && + bus->drvr->bus_if->state != BRCMF_BUS_DOWN; rxseq++, rxleft--) { /* Handle glomming separately */ @@ -2286,7 +2287,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) } /* Deflow-control stack if needed */ - if (drvr->up && (drvr->busstate == BRCMF_BUS_DATA) && + if (drvr->up && (drvr->bus_if->state == BRCMF_BUS_DATA) && drvr->txoff && (pktq_len(&bus->txq) < TXLOW)) brcmf_txflowcontrol(drvr, 0, OFF); @@ -2321,7 +2322,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; } #endif /* BCMDBG */ @@ -2331,7 +2332,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) if (err) { brcmf_dbg(ERROR, "error reading CSR: %d\n", err); - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; } brcmf_dbg(INFO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", @@ -2344,7 +2345,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; } devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, @@ -2352,7 +2353,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) if (err) { brcmf_dbg(ERROR, "error writing DEVCTL: %d\n", err); - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; } bus->clkstate = CLK_AVAIL; } else { @@ -2508,11 +2509,11 @@ clkwait: else await next interrupt */ /* On failed register access, all bets are off: no resched or interrupts */ - if ((bus->drvr->busstate == BRCMF_BUS_DOWN) || + if ((bus->drvr->bus_if->state == BRCMF_BUS_DOWN) || brcmf_sdcard_regfail(bus->sdiodev)) { brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation %d\n", brcmf_sdcard_regfail(bus->sdiodev)); - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; bus->intstatus = 0; } else if (bus->clkstate == CLK_PENDING) { brcmf_dbg(INFO, "rescheduled due to CLK_PENDING awaiting I_CHIPACTIVE interrupt\n"); @@ -2549,7 +2550,7 @@ static int brcmf_sdbrcm_dpc_thread(void *data) if (!wait_for_completion_interruptible(&bus->dpc_wait)) { /* Call bus dpc unless it indicated down (then clean stop) */ - if (bus->drvr->busstate != BRCMF_BUS_DOWN) { + if (bus->drvr->bus_if->state != BRCMF_BUS_DOWN) { if (brcmf_sdbrcm_dpc(bus)) complete(&bus->dpc_wait); } else { @@ -3111,7 +3112,7 @@ static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) /* Allow HT Clock now that the ARM is running. */ bus->alp_only = false; - bus->drvr->busstate = BRCMF_BUS_LOAD; + bus->drvr->bus_if->state = BRCMF_BUS_LOAD; } fail: return bcmerror; @@ -3354,7 +3355,7 @@ void brcmf_sdbrcm_bus_stop(struct brcmf_sdio *bus) bus->hostintmask = 0; /* Change our idea of bus state */ - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; /* Force clocks on backplane to be sure F2 interrupt propagates */ saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, @@ -3410,7 +3411,7 @@ int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr) brcmf_dbg(TRACE, "Enter\n"); /* try to download image and nvram to the dongle */ - if (drvr->busstate == BRCMF_BUS_DOWN) { + if (drvr->bus_if->state == BRCMF_BUS_DOWN) { if (!(brcmf_sdbrcm_download_firmware(bus))) return -1; } @@ -3476,7 +3477,7 @@ int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr) SBSDIO_WATERMARK, 8, &err); /* Set bus state according to enable result */ - drvr->busstate = BRCMF_BUS_DATA; + drvr->bus_if->state = BRCMF_BUS_DATA; } else { @@ -3491,7 +3492,7 @@ int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr) SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err); /* If we didn't come up, turn off backplane clock */ - if (drvr->busstate != BRCMF_BUS_DATA) + if (drvr->bus_if->state != BRCMF_BUS_DATA) brcmf_sdbrcm_clkctl(bus, CLK_NONE, false); exit: @@ -3511,7 +3512,7 @@ void brcmf_sdbrcm_isr(void *arg) return; } - if (bus->drvr->busstate == BRCMF_BUS_DOWN) { + if (bus->drvr->bus_if->state == BRCMF_BUS_DOWN) { brcmf_dbg(ERROR, "bus is down. we have nothing to do\n"); return; } @@ -3585,7 +3586,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_pub *drvr) } #ifdef BCMDBG /* Poll for console output periodically */ - if (drvr->busstate == BRCMF_BUS_DATA && bus->console_interval != 0) { + if (drvr->bus_if->state == BRCMF_BUS_DATA && + bus->console_interval != 0) { bus->console.count += BRCMF_WD_POLL_MS; if (bus->console.count >= bus->console_interval) { bus->console.count -= bus->console_interval; @@ -3764,7 +3766,7 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, NULL); - bus->drvr->busstate = BRCMF_BUS_DOWN; + bus->drvr->bus_if->state = BRCMF_BUS_DOWN; bus->sleeping = false; bus->rxflow = false; @@ -3924,7 +3926,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) } /* Attach to the brcmf/OS/network interface */ - bus->drvr = brcmf_attach(bus, SDPCM_RESERVE); + bus->drvr = brcmf_attach(bus, SDPCM_RESERVE, bus->sdiodev->dev); if (!bus->drvr) { brcmf_dbg(ERROR, "brcmf_attach failed\n"); goto fail; @@ -4003,7 +4005,7 @@ brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick) } /* don't start the wd until fw is loaded */ - if (bus->drvr->busstate == BRCMF_BUS_DOWN) + if (bus->drvr->bus_if->state == BRCMF_BUS_DOWN) return; if (wdtick) { -- 2.30.2