From 8c838d7384c6e5c0583ec6bbb2e6f6dba19feda1 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Tue, 16 Aug 2011 08:04:11 +0000 Subject: [PATCH] ixgbe: remove global reset to the MAC Reloading FW during resets can cause issues. Remove the full reset as it is not needed. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 84bb51d08e59..96e0b2083198 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -93,10 +93,8 @@ static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, **/ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) { - ixgbe_link_speed link_speed; s32 status; u32 ctrl, i; - bool link_up = false; /* Call adapter stop to disable tx/rx and clear interrupts */ status = hw->mac.ops.stop_adapter(hw); @@ -107,19 +105,7 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) ixgbe_clear_tx_pending(hw); mac_reset_top: - /* - * Issue global reset to the MAC. Needs to be SW reset if link is up. - * If link reset is used when link is up, it might reset the PHY when - * mng is using it. If link is down or the flag to force full link - * reset is set, then perform link reset. - */ - ctrl = IXGBE_CTRL_LNK_RST; - if (!hw->force_full_reset) { - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - if (link_up) - ctrl = IXGBE_CTRL_RST; - } - + ctrl = IXGBE_CTRL_RST; ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); IXGBE_WRITE_FLUSH(hw); @@ -136,8 +122,7 @@ mac_reset_top: status = IXGBE_ERR_RESET_FAILED; hw_dbg(hw, "Reset polling failed to complete.\n"); } - - msleep(50); + msleep(100); /* * Double resets are required for recovery from certain error -- 2.30.2