From 8b7c87253960aac0b670e606d8dbe2f64b1e5652 Mon Sep 17 00:00:00 2001
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Date: Thu, 7 Nov 2013 17:52:18 +0400
Subject: [PATCH] designware_i2c: disable i2c controller during target address
 setup

As it is stated in DesignWare I2C databook: writes to IC_TAR (0x4)
register succeed only when IC_ENABLE[0] is set to 0.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Tom Rini <trini@ti.com>
cc: Armando Visconti <armando.visconti@st.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Vipin KUMAR <vipin.kumar@st.com>
Cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
---
 drivers/i2c/designware_i2c.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
index c2f06627d3..c5c6015e99 100644
--- a/drivers/i2c/designware_i2c.c
+++ b/drivers/i2c/designware_i2c.c
@@ -151,7 +151,19 @@ void i2c_init(int speed, int slaveadd)
  */
 static void i2c_setaddress(unsigned int i2c_addr)
 {
+	unsigned int enbl;
+
+	/* Disable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl &= ~IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
+
 	writel(i2c_addr, &i2c_regs_p->ic_tar);
+
+	/* Enable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl |= IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
 }
 
 /*
-- 
2.30.2