From 8af74edc30bb60a90a5c4d2769ff3129b187796e Mon Sep 17 00:00:00 2001 From: =?utf8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Tue, 23 Jan 2018 17:14:56 +0100 Subject: [PATCH] drivers: spi: allow limiting reads MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit For some SPI controllers it's not possible to keep the CS active between transfers and they are limited to a known number of bytes. This splits spi_flash reads into different iterations in order to respect the SPI controller limits. Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Jagan Teki --- drivers/mtd/spi/spi_flash.c | 3 +++ include/spi.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 51e28bf07b..e40e1c01de 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -516,6 +516,9 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, else read_len = remain_len; + if (spi->max_read_size) + read_len = min(read_len, spi->max_read_size); + spi_flash_addr(read_addr, cmd); ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); diff --git a/include/spi.h b/include/spi.h index 08c7480fda..4787454e59 100644 --- a/include/spi.h +++ b/include/spi.h @@ -86,6 +86,8 @@ struct dm_spi_slave_platdata { * @cs: ID of the chip select connected to the slave. * @mode: SPI mode to use for this slave (see SPI mode flags) * @wordlen: Size of SPI word in number of bits + * @max_read_size: If non-zero, the maximum number of bytes which can + * be read at once. * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. * @memory_map: Address of read-only SPI flash access. @@ -102,6 +104,7 @@ struct spi_slave { #endif uint mode; unsigned int wordlen; + unsigned int max_read_size; unsigned int max_write_size; void *memory_map; -- 2.30.2