From 8ad8e02c2fa70cfddc1ded53ba9001c9d444075d Mon Sep 17 00:00:00 2001 From: Jan Kaisrlik Date: Tue, 20 Aug 2019 13:42:29 +0200 Subject: [PATCH] Revert "mmc: core: do not retry CMD6 in __mmc_switch()" Turns out the commit 3a0681c7448b ("mmc: core: do not retry CMD6 in __mmc_switch()") breaks initialization of a Toshiba THGBMNG5 eMMC card, when using the meson-gx-mmc.c driver on a custom board based on Amlogic A113D. The CMD6 that switches the card into HS200 mode is then one that fails and according to the below printed messages from the log: [ 1.648951] mmc0: mmc_select_hs200 failed, error -84 [ 1.648988] mmc0: error -84 whilst initialising MMC card After some analyze, it turns out that adding a delay of ~5ms inside mmc_select_bus_width() but after mmc_compare_ext_csds() has been executed, also fixes the problem. Adding yet some more debug code, trying to figure out if potentially the card could be in a busy state, both by using CMD13 and ->card_busy() ops concluded that this was not the case. Therefore, let's simply revert the commit that dropped support for retrying of CMD6, as this also fixes the problem. Fixes: 3a0681c7448b ("mmc: core: do not retry CMD6 in __mmc_switch()") Cc: stable@vger.kernel.org Signed-off-by: Jan Kaisrlik Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc_ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 74e4364bc9fb..09113b9ad679 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -564,7 +564,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, if (index == EXT_CSD_SANITIZE_START) cmd.sanitize_busy = true; - err = mmc_wait_for_cmd(host, &cmd, 0); + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); if (err) goto out; -- 2.30.2