From 8abb8dcc8d6f2a9e31551a6fa41de97bd1f15350 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 9 Nov 2009 13:09:47 -0600 Subject: [PATCH] tsec: Add support for using the BCM5482 PHY in fiber mode The BCM5482 PHY supports both copper and fiber as an ethernet medium. By enabling its copper/fiber mode auto-detection feature it can dynamically determine if it should be configured for copper or fiber. Signed-off-by: Peter Tyser Signed-off-by: Ben Warren --- drivers/net/tsec.c | 110 +++++++++++++++++++++++++++++++++++++++++++-- include/tsec.h | 13 ++++++ 2 files changed, 119 insertions(+), 4 deletions(-) diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 6a44418688..7600e40de9 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -530,8 +530,105 @@ static uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv) } return 0; +} +/* + * Find out if PHY is in copper or serdes mode by looking at Expansion Reg + * 0x42 - "Operating Mode Status Register" + */ +static int BCM8482_is_serdes(struct tsec_private *priv) +{ + u16 val; + int serdes = 0; + + write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_ER | 0x42); + val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA); + + switch (val & 0x1f) { + case 0x0d: /* RGMII-to-100Base-FX */ + case 0x0e: /* RGMII-to-SGMII */ + case 0x0f: /* RGMII-to-SerDes */ + case 0x12: /* SGMII-to-SerDes */ + case 0x13: /* SGMII-to-100Base-FX */ + case 0x16: /* SerDes-to-Serdes */ + serdes = 1; + break; + case 0x6: /* RGMII-to-Copper */ + case 0x14: /* SGMII-to-Copper */ + case 0x17: /* SerDes-to-Copper */ + break; + default: + printf("ERROR, invalid PHY mode (0x%x\n)", val); + break; + } + + return serdes; } + +/* + * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating + * Mode Status Register" + */ +uint mii_parse_BCM5482_serdes_sr(struct tsec_private *priv) +{ + u16 val; + int i = 0; + + /* Wait 1s for link - Clause 37 autonegotiation happens very fast */ + while (1) { + write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, + MIIM_BCM54XX_EXP_SEL_ER | 0x42); + val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA); + + if (val & 0x8000) + break; + + if (i++ > 1000) { + priv->link = 0; + return 1; + } + + udelay(1000); /* 1 ms */ + } + + priv->link = 1; + switch ((val >> 13) & 0x3) { + case (0x00): + priv->speed = 10; + break; + case (0x01): + priv->speed = 100; + break; + case (0x02): + priv->speed = 1000; + break; + } + + priv->duplexity = (val & 0x1000) == 0x1000; + + return 0; +} + +/* + * Figure out if BCM5482 is in serdes or copper mode and determine link + * configuration accordingly + */ +static uint mii_parse_BCM5482_sr(uint mii_reg, struct tsec_private *priv) +{ + if (BCM8482_is_serdes(priv)) { + mii_parse_BCM5482_serdes_sr(priv); + } else { + /* Wait for auto-negotiation to complete or fail */ + mii_parse_sr(mii_reg, priv); + + /* Parse BCM54xx copper aux status register */ + mii_reg = read_phy_reg(priv, MIIM_BCM54xx_AUXSTATUS); + mii_parse_BCM54xx_sr(mii_reg, priv); + } + + return 0; +} + /* Parse the 88E1011's status register for speed and duplex * information */ @@ -1091,15 +1188,20 @@ static struct phy_info phy_info_BCM5482S = { /* Read Misc Control register and or in Ethernet@Wirespeed */ {MIIM_BCM54xx_AUXCNTL, 0, &mii_BCM54xx_wirespeed}, {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, + /* Initial config/enable of secondary SerDes interface */ + {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf), NULL}, + /* Write intial value to secondary SerDes Contol */ + {MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_SSD | 0, NULL}, + {MIIM_BCM54XX_EXP_DATA, MIIM_CONTROL_RESTART, NULL}, + /* Enable copper/fiber auto-detect */ + {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201)}, {miim_end,} }, (struct phy_cmd[]) { /* startup */ /* Status is read once to clear old link state */ {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr}, + /* Determine copper/fiber, auto-negotiate, and read the result */ + {MIIM_STATUS, miim_read, &mii_parse_BCM5482_sr}, {miim_end,} }, (struct phy_cmd[]) { /* shutdown */ diff --git a/include/tsec.h b/include/tsec.h index 29e4c56d6c..b2e37d4323 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -153,6 +153,19 @@ #define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700 #define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8 +#define MIIM_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ +#define MIIM_BCM54XX_SHD_WRITE 0x8000 +#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) +#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) +#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \ + (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \ + MIIM_BCM54XX_SHD_DATA(data)) + +#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ +#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ +#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ +#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ + /* Cicada Auxiliary Control/Status Register */ #define MIIM_CIS8201_AUX_CONSTAT 0x1c #define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 -- 2.30.2