From 8a59f9590e0b79f5ec6620a9e8534224e96db9a4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 21 Feb 2018 14:45:48 +0100 Subject: [PATCH] ramips: fix MT7621 switch driver IRQ storm on init with linux 4.14 The hardware emits some interrupts while initializing and handling them can mess up the state or cause infinite loops. Fix this by disabling IRQs during init and re-enabling them afterwards Signed-off-by: Felix Fietkau --- .../files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c index ef0b79e09d..c9fea0caa2 100644 --- a/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c +++ b/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c @@ -41,6 +41,7 @@ static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv) u32 reg, i; reg = mt7530_mdio_r32(gsw, 0x700c); + mt7530_mdio_w32(gsw, 0x700c, reg); for (i = 0; i < 5; i++) if (reg & BIT(i)) { @@ -61,7 +62,6 @@ static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv) } mt7620_handle_carrier(priv); - mt7530_mdio_w32(gsw, 0x700c, 0x1f); return IRQ_HANDLED; } @@ -193,9 +193,8 @@ static void mt7621_hw_init(struct mt7620_gsw *gsw, struct device_node *np) _mt7620_mii_write(gsw, i, 0, val); } - /* mask irq */ - mt7530_mdio_w32(gsw, 0x7008, 0x1f); /* enable irq */ + mt7530_mdio_w32(gsw, 0x7008, 0x1f); val = mt7530_mdio_r32(gsw, 0x7808); val |= 3 << 16; mt7530_mdio_w32(gsw, 0x7808, val); @@ -225,10 +224,14 @@ int mtk_gsw_init(struct fe_priv *priv) if (gsw->irq) { request_irq(gsw->irq, gsw_interrupt_mt7621, 0, "gsw", priv); - mt7530_mdio_w32(gsw, 0x7008, ~0x1f); + disable_irq(gsw->irq); } + mt7621_hw_init(gsw, np); + if (gsw->irq) + enable_irq(gsw->irq); + return 0; } -- 2.30.2