From 8a4fd8778b929ac9459ad740f5e9812b2aa87bca Mon Sep 17 00:00:00 2001 From: Bogdan Purcareata Date: Sun, 29 Oct 2017 08:20:42 +0000 Subject: [PATCH] staging: fsl-dpaa2/eth: Change RX buffer alignment The WRIOP hardware block v1.0.0 (found on LS2080A board) requires data in RX buffers to be aligned to 256B, but newer revisions (e.g. on LS2088A, LS1088A) only require 64B alignment. Check WRIOP version and decide at runtime which alignment requirement to configure for ingress buffers. Signed-off-by: Bogdan Purcareata Signed-off-by: Ioana Radulescu Signed-off-by: Greg Kroah-Hartman --- .../staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 18 ++++++++++--- .../staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 27 +++++++++++++------ 2 files changed, 33 insertions(+), 12 deletions(-) diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c index d68c1f5f8746..d65950d7f06b 100644 --- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c @@ -766,11 +766,11 @@ static int add_bufs(struct dpaa2_eth_priv *priv, u16 bpid) /* Allocate buffer visible to WRIOP + skb shared info + * alignment padding */ - buf = napi_alloc_frag(DPAA2_ETH_BUF_RAW_SIZE); + buf = napi_alloc_frag(dpaa2_eth_buf_raw_size(priv)); if (unlikely(!buf)) goto err_alloc; - buf = PTR_ALIGN(buf, DPAA2_ETH_RX_BUF_ALIGN); + buf = PTR_ALIGN(buf, priv->rx_buf_align); addr = dma_map_single(dev, buf, DPAA2_ETH_RX_BUF_SIZE, DMA_FROM_DEVICE); @@ -781,7 +781,7 @@ static int add_bufs(struct dpaa2_eth_priv *priv, u16 bpid) /* tracing point */ trace_dpaa2_eth_buf_seed(priv->net_dev, - buf, DPAA2_ETH_BUF_RAW_SIZE, + buf, dpaa2_eth_buf_raw_size(priv), addr, DPAA2_ETH_RX_BUF_SIZE, bpid); } @@ -1782,11 +1782,21 @@ static int set_buffer_layout(struct dpaa2_eth_priv *priv) struct dpni_buffer_layout buf_layout = {0}; int err; + /* We need to check for WRIOP version 1.0.0, but depending on the MC + * version, this number is not always provided correctly on rev1. + * We need to check for both alternatives in this situation. + */ + if (priv->dpni_attrs.wriop_version == DPAA2_WRIOP_VERSION(0, 0, 0) || + priv->dpni_attrs.wriop_version == DPAA2_WRIOP_VERSION(1, 0, 0)) + priv->rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN_REV1; + else + priv->rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN; + /* rx buffer */ buf_layout.pass_parser_result = true; buf_layout.pass_frame_status = true; buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE; - buf_layout.data_align = DPAA2_ETH_RX_BUF_ALIGN; + buf_layout.data_align = priv->rx_buf_align; buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT | DPNI_BUF_LAYOUT_OPT_FRAME_STATUS | DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE | diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h index bfbabae1aad8..749bd6be39c1 100644 --- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h @@ -45,6 +45,8 @@ #include "dpaa2-eth-trace.h" +#define DPAA2_WRIOP_VERSION(x, y, z) ((x) << 10 | (y) << 5 | (z) << 0) + #define DPAA2_ETH_STORE_SIZE 16 /* Maximum number of scatter-gather entries in an ingress frame, @@ -85,18 +87,15 @@ */ #define DPAA2_ETH_RX_BUF_SIZE 2048 #define DPAA2_ETH_TX_BUF_ALIGN 64 -#define DPAA2_ETH_RX_BUF_ALIGN 256 + #define DPAA2_ETH_NEEDED_HEADROOM(p_priv) \ ((p_priv)->tx_data_offset + DPAA2_ETH_TX_BUF_ALIGN) -/* Hardware only sees DPAA2_ETH_RX_BUF_SIZE, but we need to allocate ingress - * buffers large enough to allow building an skb around them and also account - * for alignment restrictions +/* Due to a limitation in WRIOP 1.0.0, the RX buffer data must be aligned + * to 256B. For newer revisions, the requirement is only for 64B alignment */ -#define DPAA2_ETH_BUF_RAW_SIZE \ - (DPAA2_ETH_RX_BUF_SIZE + \ - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + \ - DPAA2_ETH_RX_BUF_ALIGN) +#define DPAA2_ETH_RX_BUF_ALIGN_REV1 256 +#define DPAA2_ETH_RX_BUF_ALIGN 64 /* We are accommodating a skb backpointer and some S/G info * in the frame's software annotation. The hardware @@ -318,6 +317,7 @@ struct dpaa2_eth_priv { struct iommu_domain *iommu_domain; u16 tx_qdid; + u16 rx_buf_align; struct fsl_mc_io *mc_io; /* Cores which have an affine DPIO/DPCON. * This is the cpu set on which Rx and Tx conf frames are processed @@ -353,6 +353,17 @@ struct dpaa2_eth_priv { extern const struct ethtool_ops dpaa2_ethtool_ops; extern const char dpaa2_eth_drv_version[]; +/* Hardware only sees DPAA2_ETH_RX_BUF_SIZE, but we need to allocate ingress + * buffers large enough to allow building an skb around them and also account + * for alignment restrictions + */ +static inline unsigned int dpaa2_eth_buf_raw_size(struct dpaa2_eth_priv *priv) +{ + return DPAA2_ETH_RX_BUF_SIZE + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + + priv->rx_buf_align; +} + static int dpaa2_eth_queue_count(struct dpaa2_eth_priv *priv) { return priv->dpni_attrs.num_queues; -- 2.30.2