From 8a09317b895f073977346779df52f67c1056d81d Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Mon, 4 Dec 2017 15:07:35 +0100 Subject: [PATCH] x86/mm/pti: Prepare the x86/entry assembly code for entry/exit CR3 switching PAGE_TABLE_ISOLATION needs to switch to a different CR3 value when it enters the kernel and switch back when it exits. This essentially needs to be done before leaving assembly code. This is extra challenging because the switching context is tricky: the registers that can be clobbered can vary. It is also hard to store things on the stack because there is an established ABI (ptregs) or the stack is entirely unsafe to use. Establish a set of macros that allow changing to the user and kernel CR3 values. Interactions with SWAPGS: Previous versions of the PAGE_TABLE_ISOLATION code relied on having per-CPU scratch space to save/restore a register that can be used for the CR3 MOV. The %GS register is used to index into our per-CPU space, so SWAPGS *had* to be done before the CR3 switch. That scratch space is gone now, but the semantic that SWAPGS must be done before the CR3 MOV is retained. This is good to keep because it is not that hard to do and it allows to do things like add per-CPU debugging information. What this does in the NMI code is worth pointing out. NMIs can interrupt *any* context and they can also be nested with NMIs interrupting other NMIs. The comments below ".Lnmi_from_kernel" explain the format of the stack during this situation. Changing the format of this stack is hard. Instead of storing the old CR3 value on the stack, this depends on the *regular* register save/restore mechanism and then uses %r14 to keep CR3 during the NMI. It is callee-saved and will not be clobbered by the C NMI handlers that get called. [ PeterZ: ESPFIX optimization ] Based-on-code-from: Andy Lutomirski Signed-off-by: Dave Hansen Signed-off-by: Thomas Gleixner Reviewed-by: Borislav Petkov Reviewed-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Brian Gerst Cc: David Laight Cc: Denys Vlasenko Cc: Eduardo Valentin Cc: Greg KH Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Will Deacon Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar --- arch/x86/entry/calling.h | 66 ++++++++++++++++++++++++++++++++ arch/x86/entry/entry_64.S | 45 +++++++++++++++++++--- arch/x86/entry/entry_64_compat.S | 24 +++++++++++- 3 files changed, 128 insertions(+), 7 deletions(-) diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h index 3fd8bc560fae..a9d17a7686ab 100644 --- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include #include +#include +#include /* @@ -187,6 +189,70 @@ For 32-bit we have the following conventions - kernel is built with #endif .endm +#ifdef CONFIG_PAGE_TABLE_ISOLATION + +/* PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two halves: */ +#define PTI_SWITCH_MASK (1< in kernel */ SWAPGS xorl %ebx, %ebx -1: ret + +1: + SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14 + + ret END(paranoid_entry) /* @@ -1266,6 +1287,7 @@ ENTRY(paranoid_exit) testl %ebx, %ebx /* swapgs needed? */ jnz .Lparanoid_exit_no_swapgs TRACE_IRQS_IRETQ + RESTORE_CR3 save_reg=%r14 SWAPGS_UNSAFE_STACK jmp .Lparanoid_exit_restore .Lparanoid_exit_no_swapgs: @@ -1293,6 +1315,8 @@ ENTRY(error_entry) * from user mode due to an IRET fault. */ SWAPGS + /* We have user CR3. Change to kernel CR3. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax .Lerror_entry_from_usermode_after_swapgs: /* Put us onto the real thread stack. */ @@ -1339,6 +1363,7 @@ ENTRY(error_entry) * .Lgs_change's error handler with kernel gsbase. */ SWAPGS + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax jmp .Lerror_entry_done .Lbstep_iret: @@ -1348,10 +1373,11 @@ ENTRY(error_entry) .Lerror_bad_iret: /* - * We came from an IRET to user mode, so we have user gsbase. - * Switch to kernel gsbase: + * We came from an IRET to user mode, so we have user + * gsbase and CR3. Switch to kernel gsbase and CR3: */ SWAPGS + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax /* * Pretend that the exception came from user mode: set up pt_regs @@ -1383,6 +1409,10 @@ END(error_exit) /* * Runs on exception stack. Xen PV does not go through this path at all, * so we can use real assembly here. + * + * Registers: + * %r14: Used to save/restore the CR3 of the interrupted context + * when PAGE_TABLE_ISOLATION is in use. Do not clobber. */ ENTRY(nmi) UNWIND_HINT_IRET_REGS @@ -1446,6 +1476,7 @@ ENTRY(nmi) swapgs cld + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx movq %rsp, %rdx movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp UNWIND_HINT_IRET_REGS base=%rdx offset=8 @@ -1698,6 +1729,8 @@ end_repeat_nmi: movq $-1, %rsi call do_nmi + RESTORE_CR3 save_reg=%r14 + testl %ebx, %ebx /* swapgs needed? */ jnz nmi_restore nmi_swapgs: diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 95ad40eb7eff..05238b29895e 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -49,6 +49,10 @@ ENTRY(entry_SYSENTER_compat) /* Interrupts are off on entry. */ SWAPGS + + /* We are about to clobber %rsp anyway, clobbering here is OK */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp /* @@ -215,6 +219,12 @@ GLOBAL(entry_SYSCALL_compat_after_hwframe) pushq $0 /* pt_regs->r14 = 0 */ pushq $0 /* pt_regs->r15 = 0 */ + /* + * We just saved %rdi so it is safe to clobber. It is not + * preserved during the C calls inside TRACE_IRQS_OFF anyway. + */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + /* * User mode is traced as though IRQs are on, and SYSENTER * turned them off. @@ -256,10 +266,22 @@ sysret32_from_system_call: * when the system call started, which is already known to user * code. We zero R8-R10 to avoid info leaks. */ + movq RSP-ORIG_RAX(%rsp), %rsp + + /* + * The original userspace %rsp (RSP-ORIG_RAX(%rsp)) is stored + * on the process stack which is not mapped to userspace and + * not readable after we SWITCH_TO_USER_CR3. Delay the CR3 + * switch until after after the last reference to the process + * stack. + * + * %r8 is zeroed before the sysret, thus safe to clobber. + */ + SWITCH_TO_USER_CR3 scratch_reg=%r8 + xorq %r8, %r8 xorq %r9, %r9 xorq %r10, %r10 - movq RSP-ORIG_RAX(%rsp), %rsp swapgs sysretl END(entry_SYSCALL_compat) -- 2.30.2