From 89c1e2da78f82a09685006291ce8bb44f635fa25 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 17 Jun 2016 09:43:58 -0600 Subject: [PATCH] Add a reset driver framework/uclass A reset controller is a hardware module that controls reset signals that affect other hardware modules or chips. This patch defines a standard API that connects reset clients (i.e. the drivers for devices affected by reset signals) to drivers for reset controllers/providers. Initially, DT is the only supported method for connecting the two. The DT binding specification (reset.txt) was taken from Linux kernel v4.5's Documentation/devicetree/bindings/reset/reset.txt. Signed-off-by: Stephen Warren Acked-by: Simon Glass --- doc/device-tree-bindings/reset/reset.txt | 75 +++++++++++++ drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/reset/Kconfig | 15 +++ drivers/reset/Makefile | 5 + drivers/reset/reset-uclass.c | 131 ++++++++++++++++++++++ include/dm/uclass-id.h | 1 + include/reset-uclass.h | 81 ++++++++++++++ include/reset.h | 135 +++++++++++++++++++++++ 9 files changed, 446 insertions(+) create mode 100644 doc/device-tree-bindings/reset/reset.txt create mode 100644 drivers/reset/Kconfig create mode 100644 drivers/reset/Makefile create mode 100644 drivers/reset/reset-uclass.c create mode 100644 include/reset-uclass.h create mode 100644 include/reset.h diff --git a/doc/device-tree-bindings/reset/reset.txt b/doc/device-tree-bindings/reset/reset.txt new file mode 100644 index 0000000000..31db6ff849 --- /dev/null +++ b/doc/device-tree-bindings/reset/reset.txt @@ -0,0 +1,75 @@ += Reset Signal Device Tree Bindings = + +This binding is intended to represent the hardware reset signals present +internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole +standalone chips are most likely better represented as GPIOs, although there +are likely to be exceptions to this rule. + +Hardware blocks typically receive a reset signal. This signal is generated by +a reset provider (e.g. power management or clock module) and received by a +reset consumer (the module being reset, or a module managing when a sub- +ordinate module is reset). This binding exists to represent the provider and +consumer, and provide a way to couple the two together. + +A reset signal is represented by the phandle of the provider, plus a reset +specifier - a list of DT cells that represents the reset signal within the +provider. The length (number of cells) and semantics of the reset specifier +are dictated by the binding of the reset provider, although common schemes +are described below. + +A word on where to place reset signal consumers in device tree: It is possible +in hardware for a reset signal to affect multiple logically separate HW blocks +at once. In this case, it would be unwise to represent this reset signal in +the DT node of each affected HW block, since if activated, an unrelated block +may be reset. Instead, reset signals should be represented in the DT node +where it makes most sense to control it; this may be a bus node if all +children of the bus are affected by the reset signal, or an individual HW +block node for dedicated reset signals. The intent of this binding is to give +appropriate software access to the reset signals in order to manage the HW, +rather than to slavishly enumerate the reset signal that affects each HW +block. + += Reset providers = + +Required properties: +#reset-cells: Number of cells in a reset specifier; Typically 0 for nodes + with a single reset output and 1 for nodes with multiple + reset outputs. + +For example: + + rst: reset-controller { + #reset-cells = <1>; + }; + += Reset consumers = + +Required properties: +resets: List of phandle and reset specifier pairs, one pair + for each reset signal that affects the device, or that the + device manages. Note: if the reset provider specifies '0' for + #reset-cells, then only the phandle portion of the pair will + appear. + +Optional properties: +reset-names: List of reset signal name strings sorted in the same order as + the resets property. Consumers drivers will use reset-names to + match reset signal names with reset specifiers. + +For example: + + device { + resets = <&rst 20>; + reset-names = "reset"; + }; + +This represents a device with a single reset signal named "reset". + + bus { + resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>; + reset-names = "i2s1", "i2s2", "dma", "mixer"; + }; + +This represents a bus that controls the reset signal of each of four sub- +ordinate devices. Consider for example a bus that fails to operate unless no +child device has reset asserted. diff --git a/drivers/Kconfig b/drivers/Kconfig index f2a137ad87..f6003a0a59 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -56,6 +56,8 @@ source "drivers/ram/Kconfig" source "drivers/remoteproc/Kconfig" +source "drivers/reset/Kconfig" + source "drivers/rtc/Kconfig" source "drivers/serial/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index db5317c9c7..1723958857 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_U_QE) += qe/ obj-y += mailbox/ obj-y += memory/ obj-y += pwm/ +obj-y += reset/ obj-y += input/ # SOC specific infrastructure drivers. obj-y += soc/ diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig new file mode 100644 index 0000000000..5c449a99d3 --- /dev/null +++ b/drivers/reset/Kconfig @@ -0,0 +1,15 @@ +menu "Reset Controller Support" + +config DM_RESET + bool "Enable reset controllers using Driver Model" + depends on DM && OF_CONTROL + help + Enable support for the reset controller driver class. Many hardware + modules are equipped with a reset signal, typically driven by some + reset controller hardware module within the chip. In U-Boot, reset + controller drivers allow control over these reset signals. In some + cases this API is applicable to chips outside the CPU as well, + although driving such reset isgnals using GPIOs may be more + appropriate in this case. + +endmenu diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile new file mode 100644 index 0000000000..508608e83f --- /dev/null +++ b/drivers/reset/Makefile @@ -0,0 +1,5 @@ +# Copyright (c) 2016, NVIDIA CORPORATION. +# +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_DM_RESET) += reset-uclass.o diff --git a/drivers/reset/reset-uclass.c b/drivers/reset/reset-uclass.c new file mode 100644 index 0000000000..edaecfbc99 --- /dev/null +++ b/drivers/reset/reset-uclass.c @@ -0,0 +1,131 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static inline struct reset_ops *reset_dev_ops(struct udevice *dev) +{ + return (struct reset_ops *)dev->driver->ops; +} + +static int reset_of_xlate_default(struct reset_ctl *reset_ctl, + struct fdtdec_phandle_args *args) +{ + debug("%s(reset_ctl=%p)\n", __func__, reset_ctl); + + if (args->args_count != 1) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + reset_ctl->id = args->args[0]; + + return 0; +} + +int reset_get_by_index(struct udevice *dev, int index, + struct reset_ctl *reset_ctl) +{ + struct fdtdec_phandle_args args; + int ret; + struct udevice *dev_reset; + struct reset_ops *ops; + + debug("%s(dev=%p, index=%d, reset_ctl=%p)\n", __func__, dev, index, + reset_ctl); + + ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev->of_offset, + "resets", "#reset-cells", 0, + index, &args); + if (ret) { + debug("%s: fdtdec_parse_phandle_with_args failed: %d\n", + __func__, ret); + return ret; + } + + ret = uclass_get_device_by_of_offset(UCLASS_RESET, args.node, + &dev_reset); + if (ret) { + debug("%s: uclass_get_device_by_of_offset failed: %d\n", + __func__, ret); + return ret; + } + ops = reset_dev_ops(dev_reset); + + reset_ctl->dev = dev_reset; + if (ops->of_xlate) + ret = ops->of_xlate(reset_ctl, &args); + else + ret = reset_of_xlate_default(reset_ctl, &args); + if (ret) { + debug("of_xlate() failed: %d\n", ret); + return ret; + } + + ret = ops->request(reset_ctl); + if (ret) { + debug("ops->request() failed: %d\n", ret); + return ret; + } + + return 0; +} + +int reset_get_by_name(struct udevice *dev, const char *name, + struct reset_ctl *reset_ctl) +{ + int index; + + debug("%s(dev=%p, name=%s, reset_ctl=%p)\n", __func__, dev, name, + reset_ctl); + + index = fdt_find_string(gd->fdt_blob, dev->of_offset, "reset-names", + name); + if (index < 0) { + debug("fdt_find_string() failed: %d\n", index); + return index; + } + + return reset_get_by_index(dev, index, reset_ctl); +} + +int reset_free(struct reset_ctl *reset_ctl) +{ + struct reset_ops *ops = reset_dev_ops(reset_ctl->dev); + + debug("%s(reset_ctl=%p)\n", __func__, reset_ctl); + + return ops->free(reset_ctl); +} + +int reset_assert(struct reset_ctl *reset_ctl) +{ + struct reset_ops *ops = reset_dev_ops(reset_ctl->dev); + + debug("%s(reset_ctl=%p)\n", __func__, reset_ctl); + + return ops->rst_assert(reset_ctl); +} + +int reset_deassert(struct reset_ctl *reset_ctl) +{ + struct reset_ops *ops = reset_dev_ops(reset_ctl->dev); + + debug("%s(reset_ctl=%p)\n", __func__, reset_ctl); + + return ops->rst_deassert(reset_ctl); +} + +UCLASS_DRIVER(reset) = { + .id = UCLASS_RESET, + .name = "reset", +}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 0777cbe27e..b768660e85 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -63,6 +63,7 @@ enum uclass_id { UCLASS_PWRSEQ, /* Power sequence device */ UCLASS_REGULATOR, /* Regulator device */ UCLASS_REMOTEPROC, /* Remote Processor device */ + UCLASS_RESET, /* Reset controller device */ UCLASS_RTC, /* Real time clock device */ UCLASS_SERIAL, /* Serial UART */ UCLASS_SPI, /* SPI bus */ diff --git a/include/reset-uclass.h b/include/reset-uclass.h new file mode 100644 index 0000000000..50adeca757 --- /dev/null +++ b/include/reset-uclass.h @@ -0,0 +1,81 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RESET_UCLASS_H +#define _RESET_UCLASS_H + +/* See reset.h for background documentation. */ + +#include + +struct udevice; + +/** + * struct reset_ops - The functions that a reset controller driver must + * implement. + */ +struct reset_ops { + /** + * of_xlate - Translate a client's device-tree (OF) reset specifier. + * + * The reset core calls this function as the first step in implementing + * a client's reset_get_by_*() call. + * + * If this function pointer is set to NULL, the reset core will use a + * default implementation, which assumes #reset-cells = <1>, and that + * the DT cell contains a simple integer reset signal ID. + * + * At present, the reset API solely supports device-tree. If this + * changes, other xxx_xlate() functions may be added to support those + * other mechanisms. + * + * @reset_ctl: The reset control struct to hold the translation result. + * @args: The reset specifier values from device tree. + * @return 0 if OK, or a negative error code. + */ + int (*of_xlate)(struct reset_ctl *reset_ctl, + struct fdtdec_phandle_args *args); + /** + * request - Request a translated reset control. + * + * The reset core calls this function as the second step in + * implementing a client's reset_get_by_*() call, following a + * successful xxx_xlate() call. + * + * @reset_ctl: The reset control struct to request; this has been + * filled in by a previoux xxx_xlate() function call. + * @return 0 if OK, or a negative error code. + */ + int (*request)(struct reset_ctl *reset_ctl); + /** + * free - Free a previously requested reset control. + * + * This is the implementation of the client reset_free() API. + * + * @reset_ctl: The reset control to free. + * @return 0 if OK, or a negative error code. + */ + int (*free)(struct reset_ctl *reset_ctl); + /** + * rst_assert - Assert a reset signal. + * + * Note: This function is named rst_assert not assert to avoid + * conflicting with global macro assert(). + * + * @reset_ctl: The reset signal to assert. + * @return 0 if OK, or a negative error code. + */ + int (*rst_assert)(struct reset_ctl *reset_ctl); + /** + * rst_deassert - Deassert a reset signal. + * + * @reset_ctl: The reset signal to deassert. + * @return 0 if OK, or a negative error code. + */ + int (*rst_deassert)(struct reset_ctl *reset_ctl); +}; + +#endif diff --git a/include/reset.h b/include/reset.h new file mode 100644 index 0000000000..dc0900f96a --- /dev/null +++ b/include/reset.h @@ -0,0 +1,135 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RESET_H +#define _RESET_H + +/** + * A reset is a hardware signal indicating that a HW module (or IP block, or + * sometimes an entire off-CPU chip) reset all of its internal state to some + * known-good initial state. Drivers will often reset HW modules when they + * begin execution to ensure that hardware correctly responds to all requests, + * or in response to some error condition. Reset signals are often controlled + * externally to the HW module being reset, by an entity this API calls a reset + * controller. This API provides a standard means for drivers to request that + * reset controllers set or clear reset signals. + * + * A driver that implements UCLASS_RESET is a reset controller or provider. A + * controller will often implement multiple separate reset signals, since the + * hardware it manages often has this capability. reset-uclass.h describes the + * interface which reset controllers must implement. + * + * Reset consumers/clients are the HW modules affected by reset signals. This + * header file describes the API used by drivers for those HW modules. + */ + +struct udevice; + +/** + * struct reset_ctl - A handle to (allowing control of) a single reset signal. + * + * Clients provide storage for reset control handles. The content of the + * structure is managed solely by the reset API and reset drivers. A reset + * control struct is initialized by "get"ing the reset control struct. The + * reset control struct is passed to all other reset APIs to identify which + * reset signal to operate upon. + * + * @dev: The device which implements the reset signal. + * @id: The reset signal ID within the provider. + * + * Currently, the reset API assumes that a single integer ID is enough to + * identify and configure any reset signal for any reset provider. If this + * assumption becomes invalid in the future, the struct could be expanded to + * either (a) add more fields to allow reset providers to store additional + * information, or (b) replace the id field with an opaque pointer, which the + * provider would dynamically allocated during its .of_xlate op, and process + * during is .request op. This may require the addition of an extra op to clean + * up the allocation. + */ +struct reset_ctl { + struct udevice *dev; + /* + * Written by of_xlate. We assume a single id is enough for now. In the + * future, we might add more fields here. + */ + unsigned long id; +}; + +/** + * reset_get_by_index - Get/request a reset signal by integer index. + * + * This looks up and requests a reset signal. The index is relative to the + * client device; each device is assumed to have n reset signals associated + * with it somehow, and this function finds and requests one of them. The + * mapping of client device reset signal indices to provider reset signals may + * be via device-tree properties, board-provided mapping tables, or some other + * mechanism. + * + * @dev: The client device. + * @index: The index of the reset signal to request, within the client's + * list of reset signals. + * @reset_ctl A pointer to a reset control struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int reset_get_by_index(struct udevice *dev, int index, + struct reset_ctl *reset_ctl); + +/** + * reset_get_by_name - Get/request a reset signal by name. + * + * This looks up and requests a reset signal. The name is relative to the + * client device; each device is assumed to have n reset signals associated + * with it somehow, and this function finds and requests one of them. The + * mapping of client device reset signal names to provider reset signal may be + * via device-tree properties, board-provided mapping tables, or some other + * mechanism. + * + * @dev: The client device. + * @name: The name of the reset signal to request, within the client's + * list of reset signals. + * @reset_ctl: A pointer to a reset control struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int reset_get_by_name(struct udevice *dev, const char *name, + struct reset_ctl *reset_ctl); + +/** + * reset_free - Free a previously requested reset signal. + * + * @reset_ctl: A reset control struct that was previously successfully + * requested by reset_get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int reset_free(struct reset_ctl *reset_ctl); + +/** + * reset_assert - Assert a reset signal. + * + * This function will assert the specified reset signal, thus resetting the + * affected HW module(s). Depending on the reset controller hardware, the reset + * signal will either stay asserted until reset_deassert() is called, or the + * hardware may autonomously clear the reset signal itself. + * + * @reset_ctl: A reset control struct that was previously successfully + * requested by reset_get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int reset_assert(struct reset_ctl *reset_ctl); + +/** + * reset_deassert - Deassert a reset signal. + * + * This function will deassert the specified reset signal, thus releasing the + * affected HW modules() from reset, and allowing them to continue normal + * operation. + * + * @reset_ctl: A reset control struct that was previously successfully + * requested by reset_get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int reset_deassert(struct reset_ctl *reset_ctl); + +#endif -- 2.30.2