From 87cb7e8cc59c89ccdcf243671c932179bb651a71 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 8 Jul 2008 15:08:29 -0700 Subject: [PATCH] igb: reenable CRC stripping in hardware We can remove a clunky workaround for not having the hardware strip the CRC. 82575 silicon as well as the older PCI Express e1000e hardware all work OK in this respect. Signed-off-by: Auke Kok Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index e8ef5410591a..ae329c02eaef 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1664,10 +1664,12 @@ static void igb_setup_rctl(struct igb_adapter *adapter) E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); - /* disable the stripping of CRC because it breaks - * BMC firmware connected over SMBUS - rctl |= E1000_RCTL_SECRC; + /* + * enable stripping of CRC. It's unlikely this will break BMC + * redirection as it did with e1000. Newer features require + * that the HW strips the CRC. */ + rctl |= E1000_RCTL_SECRC; rctl &= ~E1000_RCTL_SBP; @@ -3743,7 +3745,6 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, } } send_up: - pskb_trim(skb, skb->len - 4); i++; if (i == rx_ring->count) i = 0; -- 2.30.2