From 8725d1cffa66ed6c6fff1a255c02963cc0d714a9 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Andr=C3=A9=20Valentin?= Date: Thu, 2 Feb 2017 12:05:32 +0100 Subject: [PATCH] ipq806x: fixup nbg6817 internal mmc and switch configuration in DTS MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The setting mmc-ddr-1_8v in the platform dts leads to read errors. The device is unusable and system reboots in a loop. Because NBG6817 is the only mmc device, I removed it in base dts. The second change removes settings now present in base dts. The third change references was a wrong conversion of constants in the switch settings. Switch now initializes again. Signed-off-by: André Valentin --- .../ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts | 4 +--- .../linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi | 1 - 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts index abc381a15e..4db1a30592 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts @@ -234,7 +234,7 @@ compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_LOW &qcom_pinmux 0 GPIO_ACTIVE_LOW>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; @@ -323,8 +323,6 @@ amba { sdcc1: sdcc@12400000 { status = "okay"; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi index 8721577a17..b3ccb2ede2 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -123,7 +123,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; - mmc-ddr-1_8v; vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; dma-names = "tx", "rx"; -- 2.30.2