From 85ef69b20299c2c4f42d6bfbfaf807358ebe2078 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= Date: Tue, 7 Apr 2020 14:35:26 +0200 Subject: [PATCH] mvebu: add support for Buffalo LinkStation LS421DE MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Buffalo LinkStation LS421DE is a dual bay NAS, based on Marvell Armada 370 Hardware: SoC: Marvell Armada 88F6707-A1 CPU: Cortex-A9 1200 MHz, 1 core Flash: SPI-NOR 1 MiB, NAND 512 MiB RAM: DDR3 512 MiB Ethernet: 1x 10/100/1000 Mbps USB: 1x 2.0, 1x 3.0 SATA: 2x 3.0 Gbps LEDs/Input : 5x / 2x (1x button, 1x slide-switch) RTC: Ricoh RS5C372A, I2C, no battery Flash instruction (UART+TFTP): 1. Downgrade the OEM firmware to 1.34 version (BUFFALO_BOOTVER=0.13) 2. Remove any hard drive from inside the bays. 3. Boot the Openwrt initramfs image using the U-Boot serial console: tftpboot 0x1200000 buffalo_ls421de-initramfs-kernel.bin bootm 0x1200000 4. Flash the sysupgrade image using the Openwrt console: sysupgrade -n buffalo_ls421de-squashfs-sysupgrade.bin 5. Wait until it finish, the device will reboot with Openwrt installed on the NAND flash. Note: - Device shuting down doesn't work, even if the power slide switch is used. We must first, via MDIO, set the unused LED2 at the ethernet phy0 to off state. Reboot works ok. Signed-off-by: Daniel González Cabanelas Reviewed-by: Tomasz Maciej Nowak --- .../base-files/lib/preinit/06_set_iface_mac | 4 + .../base-files/lib/upgrade/platform.sh | 3 + .../boot/dts/armada-370-buffalo-ls421de.dts | 360 ++++++++++++++++++ target/linux/mvebu/image/Makefile | 14 + target/linux/mvebu/image/cortexa9.mk | 16 + 5 files changed, 397 insertions(+) create mode 100644 target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts diff --git a/target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac index fd41836c8d4..62ce2653a0b 100644 --- a/target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac @@ -9,6 +9,10 @@ preinit_set_mac_address() { . /lib/functions.sh case $(board_name) in + buffalo,ls421de) + mac=$(mtd_get_mac_ascii u-boot-env eth1addr) + ip link set dev eth0 address $mac 2>/dev/null + ;; linksys,caiman|linksys,cobra|linksys,rango|linksys,shelby|linksys,venom) # rename interfaces back to the way they were with 4.4 case "$(readlink /sys/class/net/eth0)" in diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh index 8baed969a34..63042b15354 100755 --- a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh @@ -22,6 +22,9 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in + buffalo,ls421de) + nand_do_upgrade "$1" + ;; cznic,turris-omnia|\ solidrun,clearfog-base-a1|\ solidrun,clearfog-pro-a1) diff --git a/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts new file mode 100644 index 00000000000..6b8a964ab30 --- /dev/null +++ b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Buffalo LinkStation LS421DE + * + * Copyright (C) 2020 Daniel González Cabanelas + */ + +/dts-v1/; + +#include "armada-370.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include +#include + +/ { + model = "Buffalo LinkStation LS421DE"; + compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp"; + + aliases { + led-boot = &led_boot; + led-failsafe = &led_failsafe; + led-running = &led_power; + led-upgrade = &led_upgrade; + }; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk noinitrd rootfstype=squashfs"; + stdout-path = "serial0:115200n8"; + append-rootblock = "nullparameter="; /* override the bootloader args */ + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + }; + + gpio_fan { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH + &gpio0 14 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_hdd_present &pmx_buttons>; + pinctrl-names = "default"; + + hdd1-present { + label = "HDD1 Present"; + linux,code = ; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + hdd2-present { + label = "HDD2 Present"; + linux,code = ; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + + }; + + power { + label = "Power Switch"; + linux,code = ; + linux,input-type = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + function { + label = "Function Button"; + linux,code = ; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_leds1 &pmx_leds2>; + + system_red { + label = "ls421de:red:system"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + led_power: power_white { + label = "ls421de:white:power"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_failsafe: power_red { + label = "ls421de:red:power"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + led_upgrade: power_orange { + label = "ls421de:orange:power"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; + + led_boot: system_white { + label = "ls421de:white:system"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + hdd1_red { + label = "ls421de:red:hdd1"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + + hdd2_red { + label = "ls421de:red:hdd2"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; + + pinctrl-names = "default"; + + usb_v5_regulator: usb-v5-regulator { + compatible = "regulator-fixed"; + regulator-name = "USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; + + ata1_regulator: ata1-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "HDD1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + ata2_regulator: ata2-regulator { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + /* FIXME: this driver needs to be aware of the LED2 eth phy use, + which must be set to off state before shutting down the machine */ + restart_poweroff { + compatible = "restart-poweroff"; + }; +}; + +ð1 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { /* Marvell 88E1518 */ + reg = <0>; + /* LED2 is used to inform uBoot if the power-switch was slided + to the "off" position, and then power off the machine. + Page 0x3, Register 0x10, bit 8: + 0x800: LED2 off, power off the machine + 0x900: LED2 on, boot the machine */ + marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */ + <0x3 0x11 0x1 0x4401>, /* LED polarity */ + <0x3 0x12 0x1 0x4905>; /* LED Timer */ + }; +}; + +&pciec { + status = "okay"; + /* Connected to uPD720202 USB 3.0 Host */ + pcie@1,0 { + status = "okay"; + }; +}; + +&pmsu { + pinctrl-0 = <&pmx_power_cpu>; + pinctrl-names = "default"; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + nr-ports = <2>; + status = "okay"; +}; + +&sdio { + pinctrl-0 = <&sdio_pins2>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x02000000>; /* 32 MiB */ + }; + + partition@2000000 { + label = "ubi"; + reg = <0x02000000 0x1e000000>; /* 480 MiB */ + }; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000 0xf0000>; /* 960 KiB*/ + label = "u-boot"; + read-only; + }; + partition@f0000 { + reg = <0xf0000 0x10000>; /* 64 KiB */ + label = "u-boot-env"; + }; + }; + }; +}; + +&pinctrl { + pmx_power_cpu: pmx-power-cpu { + marvell,pins = "mpp4"; + marvell,function = "vdd"; + }; + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp5"; + marvell,function = "gpo"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_power_hdd2: pmx-power-hdd2 { + marvell,pins = "mpp9"; + marvell,function = "gpo"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + pmx_hdd_present: pmx-hdd-present { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_buttons: pmx-buttons { + marvell,pins = "mpp15", "mpp16"; + marvell,function = "gpio"; + }; + pmx_leds1: pmx-leds { + marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; + marvell,function = "gpo"; + }; + pmx_leds2: pmx-leds { + marvell,pins = "mpp55", "mpp57", "mpp62"; + marvell,function = "gpio"; + }; +}; diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile index ef9274866de..3a478780693 100644 --- a/target/linux/mvebu/image/Makefile +++ b/target/linux/mvebu/image/Makefile @@ -40,6 +40,20 @@ define Build/boot-img-ext4 make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M $@.bootimg $@.boot endef +define Build/buffalo-kernel-jffs2 + rm -rf $(KDIR)/kernel_jffs2 $@.fakerd + mkdir -p $(KDIR)/kernel_jffs2 + dd if=/dev/zero of=$@.fakerd bs=131008 count=1 conv=sync + $(STAGING_DIR_HOST)/bin/mkimage \ + -T ramdisk -A $(LINUX_KARCH) -O linux -C gzip -n 'fake initrd' \ + -d $@.fakerd $(KDIR)/kernel_jffs2/initrd.buffalo + cp $@ $(KDIR)/kernel_jffs2/uImage.buffalo + $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ + --little-endian -v --squash-uids -q -f -n -x lzma -x rtime -m none \ + --eraseblock=128KiB --pad=$(KERNEL_SIZE) -d $(KDIR)/kernel_jffs2 -o $@ + rm -rf $(KDIR)/kernel_jffs2 $@.fakerd +endef + define Build/sdcard-img SIGNATURE="$(IMG_PART_SIGNATURE)" \ ./gen_mvebu_sdcard_img.sh $@ \ diff --git a/target/linux/mvebu/image/cortexa9.mk b/target/linux/mvebu/image/cortexa9.mk index 85bfa94dbd3..4ab6f4a7e83 100644 --- a/target/linux/mvebu/image/cortexa9.mk +++ b/target/linux/mvebu/image/cortexa9.mk @@ -6,6 +6,22 @@ # See /LICENSE for more information. # +define Device/buffalo_ls421de + $(Device/NAND-128K) + DEVICE_VENDOR := Buffalo + DEVICE_MODEL := LinkStation LS421DE + SUBPAGESIZE := + KERNEL_SIZE := 33554432 + FILESYSTEMS := squashfs ubifs + KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-jffs2 + KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none + DEVICE_DTS := armada-370-buffalo-ls421de + DEVICE_PACKAGES := \ + kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-usb3 kmod-md-raid0 \ + kmod-md-raid1 kmod-md-mod kmod-fs-xfs mkf2fs e2fsprogs partx-utils +endef +TARGET_DEVICES += buffalo_ls421de + define Device/cznic_turris-omnia DEVICE_VENDOR := CZ.NIC DEVICE_MODEL := Turris Omnia -- 2.30.2