From 83b6464daa017eb142370f537e58f19e8d9f6e53 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 23 Nov 2015 16:27:38 +0100 Subject: [PATCH] ARM: zynq: Fix location of stack and malloc areas The patch "board_init: Change the logic to setup malloc_base" (sha1: 9ac4fc82071ce346e3885118242ff45d22f69b82) breaks SPL for Zynq because it puts early alloc area on the stack which caused that stack was decreased by CONFIG_SYS_MALLOC_F_LEN (0x400) and there was not enough space for regular stack. This patch changes memory layout to better utilize the last 64k OCM block. 0xffff0000 - 0xfff1000 - Full malloc space 0xffff1000 - 0xffff300 - Stack location 0xfffff300 - CONFIG_SYS_MALLOC_F_LEN - Early malloc space 0xfffffd00 - sizeof(GD) - GD 0xfffffe00 - 0xffffffff - SoC specific boot code Signed-off-by: Michal Simek Tested-by: Moritz Fischer --- include/configs/zynq-common.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index d3d5470ad8..d499656bb5 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -367,17 +367,17 @@ /* The highest 64k OCM address */ #define OCM_HIGH_ADDR 0xffff0000 -/* Just define any reasonable size */ -#define CONFIG_SPL_STACK_SIZE 0x1000 - -/* SPL stack position - and stack goes down */ -#define CONFIG_SPL_STACK (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE) - /* On the top of OCM space */ -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_STACK + \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_SPL_MALLOC_START OCM_HIGH_ADDR #define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000 +/* + * SPL stack position - and stack goes down + * 0xfffffe00 is used for putting wfi loop. + * Set it up as limit for now. + */ +#define CONFIG_SPL_STACK 0xfffffe00 + /* BSS setup */ #define CONFIG_SPL_BSS_START_ADDR 0x100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 -- 2.30.2