From 8297dd1d934281175ffa8646a2e3200755402db5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 9 Mar 2019 21:57:58 +0100 Subject: [PATCH] ddr: socfpga: Clean up EMIF reset The EMIF reset code can well use wait_for_bit_le32() instead of all that convoluted polling code. Reduce the timeout from 100 seconds to 1 second, since if the EMIF fails to reset itself in 1 second, it's unlikely longer wait would help. Make sure to clear the EMIF reset request even if the SEQ2CORE_INT_RESP_BIT isn't asserted. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Simon Goldschmidt Cc: Tien Fong Chee --- drivers/ddr/altera/sdram_arria10.c | 33 +++++++----------------------- 1 file changed, 7 insertions(+), 26 deletions(-) diff --git a/drivers/ddr/altera/sdram_arria10.c b/drivers/ddr/altera/sdram_arria10.c index b450a1b1be..ff83c61002 100644 --- a/drivers/ddr/altera/sdram_arria10.c +++ b/drivers/ddr/altera/sdram_arria10.c @@ -108,28 +108,6 @@ static int is_sdram_cal_success(void) return readl(&socfpga_ecc_hmc_base->ddrcalstat); } -static unsigned char ddr_get_bit(u32 ereg, unsigned char bit) -{ - u32 reg = readl(ereg); - - return (reg & BIT(bit)) ? 1 : 0; -} - -static unsigned char ddr_wait_bit(u32 ereg, u32 bit, - u32 expected, u32 timeout_usec) -{ - u32 tmr; - - for (tmr = 0; tmr < timeout_usec; tmr += 100) { - udelay(100); - WATCHDOG_RESET(); - if (ddr_get_bit(ereg, bit) == expected) - return 0; - } - - return 1; -} - static int emif_clear(void) { writel(0, DDR_REG_CORE2SEQ); @@ -162,13 +140,16 @@ static int emif_reset(void) writel(CORE2SEQ_INT_REQ, DDR_REG_CORE2SEQ); - if (ddr_wait_bit(DDR_REG_SEQ2CORE, SEQ2CORE_INT_RESP_BIT, 0, 1000000)) { + ret = wait_for_bit_le32((u32 *)DDR_REG_SEQ2CORE, + SEQ2CORE_INT_RESP_BIT, false, 1000, false); + if (ret) { debug("emif_reset failed to see interrupt acknowledge\n"); - return -EPERM; - } else { - debug("emif_reset interrupt acknowledged\n"); + emif_clear(); + return ret; } + mdelay(1); + ret = emif_clear(); if (ret) { debug("emif_clear() failed\n"); -- 2.30.2