From 824705d53cdbdead205bf4b2267c54d456c6c7bc Mon Sep 17 00:00:00 2001 From: Jon Nettleton Date: Mon, 11 Jun 2018 15:26:23 +0300 Subject: [PATCH] mx6cuboxi: Add emmc device tree suffix Mainline and now the SolidRun 4.9 nxp based tree use the new reorganization of device-tree files that separate out the emmc into its own dtb. u-boot will now look for -emmc in the device tree name if one is detected. Signed-off-by: Jon Nettleton Signed-off-by: Baruch Siach --- include/configs/mx6cuboxi.h | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 1f7297d114..a647aaba68 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -71,6 +71,8 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ + "som_rev=undefined\0" \ + "has_emmc=undefined\0" \ "fdtfile=undefined\0" \ "fdt_addr_r=0x18000000\0" \ "fdt_addr=0x18000000\0" \ @@ -100,19 +102,21 @@ "fi; " \ "fi\0" \ "findfdt="\ - "if test $board_rev = MX6Q ; then " \ + "if test ${board_rev} = MX6Q; then " \ "setenv fdtprefix imx6q; fi; " \ - "if test $board_rev = MX6DL ; then " \ + "if test ${board_rev} = MX6DL; then " \ "setenv fdtprefix imx6dl; fi; " \ - "if test $som_rev = V15 ; then " \ + "if test ${som_rev} = V15; then " \ "setenv fdtsuffix -som-v15; fi; " \ - "if test $board_name = HUMMINGBOARD2 ; then " \ - "setenv fdtfile ${fdtprefix}-hummingboard2${fdtsuffix}.dtb; fi; " \ - "if test $board_name = HUMMINGBOARD ; then " \ - "setenv fdtfile ${fdtprefix}-hummingboard${fdtsuffix}.dtb; fi; " \ - "if test $board_name = CUBOXI ; then " \ - "setenv fdtfile ${fdtprefix}-cubox-i${fdtsuffix}.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ + "if test ${has_emmc} = yes; then " \ + "setenv emmcsuffix -emmc; fi; " \ + "if test ${board_name} = HUMMINGBOARD2 ; then " \ + "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \ + "if test ${board_name} = HUMMINGBOARD ; then " \ + "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \ + "if test ${board_name} = CUBOXI ; then " \ + "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \ + "if test ${fdtfile} = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" \ BOOTENV -- 2.30.2