From 81d694e30b4926fea057bd3e46d996a8f098b95a Mon Sep 17 00:00:00 2001 From: Szabolcs Hubai Date: Sun, 10 Oct 2021 01:32:30 +0200 Subject: [PATCH] ipq40xx: use zImage for GL.iNet GL-B1300, GL-S1300 to shrink below 4096k In the "ipq40xx: switch to Kernel 5.10" discussion at GitHub, Adrian noted [0] that these GL.iNet Conexa series devices, GL-B1300 and GL-S1300 failed their image generation [1] as their gzipped uImage kernel went above 4096k. While notifying the vendor about this problem [2], I tested all U-Boot releases from GL.iNet: - they really fail to boot kernel above 4096k - they don't support lzma: "Unimplemented compression type 3" - but they boot zImage Using zImage (xz compression) the kernel is 2909k which is more than a megabyte away from the KERNEL_SIZE := 4096k limit. The gzip compressed version would be 4116k. [0]: https://github.com/openwrt/openwrt/pull/4620#issuecomment-932765776 [1]: commit 7b1fa276f5a2 ("ipq40xx: add testing support for kernel 5.10") [2]: https://forum.gl-inet.com/t/ipq40xx-kernel-size-and-u-boot-v5-10-is-too-big-for-4-mb/17619 Signed-off-by: Szabolcs Hubai --- target/linux/ipq40xx/image/generic.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 18f5d238c7..e0cfa07541 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -495,7 +495,7 @@ endef TARGET_DEVICES += glinet_gl-ap1300 define Device/glinet_gl-b1300 - $(call Device/FitImage) + $(call Device/FitzImage) DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-B1300 BOARD_NAME := gl-b1300 @@ -507,7 +507,7 @@ endef TARGET_DEVICES += glinet_gl-b1300 define Device/glinet_gl-s1300 - $(call Device/FitImage) + $(call Device/FitzImage) DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-S1300 SOC := qcom-ipq4029 -- 2.30.2