From 81959225269d39ffb022eaad3c6ed328c65b1c15 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 22 May 2023 23:16:11 +0200 Subject: [PATCH] ipq807x: drop upstreamed patches Drop all of the patches that have been already been included in kernel 6.1. Signed-off-by: Robert Marko --- ...-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch | 43 -- ...pdate-BAM-DMA-node-name-per-DT-schem.patch | 26 -- ...4-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch | 40 -- ...sm8996-Move-clock-cells-to-QMP-PHY-c.patch | 53 --- ...-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch | 36 -- ...64-dts-qcom-ipq8074-add-SMEM-support.patch | 51 --- ...ipq8074-add-the-reserved-memory-node.patch | 30 -- ...om-ipq8074-enable-the-GICv2m-support.patch | 36 -- ...pq8074-drop-the-clock-frequency-prop.patch | 25 -- ...lign-dmas-in-I2C-SPI-UART-with-DT-sc.patch | 61 --- ...lign-clocks-in-I2C-SPI-with-DT-schem.patch | 68 --- ...orrect-DWC3-node-names-and-unit-addr.patch | 36 -- ...pq8074-add-dedicated-qcom-ipq8074-dw.patch | 36 -- ...align-DWC3-USB-clocks-with-DT-schema.patch | 39 -- ...64-dts-qcom-adjust-whitespace-around.patch | 36 -- ...ts-qcom-Fix-sdhci-node-names-use-mmc.patch | 34 -- ...ix-ordering-of-clocks-clock-names-fo.patch | 47 -- ...ck-qcom-ipq8074-add-PPE-crypto-clock.patch | 25 -- ...lk-qcom-ipq8074-add-PPE-crypto-clock.patch | 52 --- ...ngs-clock-qcom-ipq8074-add-USB-GDSCs.patch | 25 -- ...-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch | 79 ---- ...s-qcom-ipq8074-add-USB-power-domains.patch | 43 -- ...pq8074-move-ARMv8-timer-out-of-SoC-n.patch | 50 --- ...-dts-qcom-ipq8074-add-reset-to-SDHCI.patch | 27 -- ...com-ipq8074-drop-USB-PHY-clock-index.patch | 36 -- ...s-ipc-Consolidate-msm8994-type-apcs_.patch | 74 ---- ...s-ipc-add-IPQ8074-APSS-clock-support.patch | 30 -- ...arm64-dts-qcom-ipq8074-add-APCS-node.patch | 37 -- ...pq8074-add-size-address-cells-to-DTS.patch | 54 --- ...ipq8074-add-interrupt-parent-to-DTSI.patch | 50 --- ...align-SDHCI-reg-names-with-DT-schema.patch | 28 -- ...q-pll-use-OF-match-data-for-Alpha-PL.patch | 70 --- ...q-pll-update-IPQ6018-Alpha-PLL-confi.patch | 40 -- ...apss-ipq-pll-add-support-for-IPQ8074.patch | 47 -- ...1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch | 51 --- ...apss-ipq6018-fix-apcs_alias0_clk_src.patch | 63 --- ...pq8074-correct-APCS-register-space-s.patch | 32 -- ...-Allow-specifying-custom-reset-delay.patch | 54 --- ...eplace-deprecated-perst-gpio-with-pe.patch | 52 --- ...r-to-look-up-an-SPMI-device-from-a-d.patch | 57 --- ...-pmic-Sort-compatibles-in-the-driver.patch | 60 --- ...ic-Add-missing-PMICs-supported-by-so.patch | 65 --- ...ic-expose-the-PMIC-revid-information.patch | 417 ------------------ ...-pmic-read-fab-id-on-supported-PMICs.patch | 52 --- ...om-spmi-pmic-Add-support-for-PMP8074.patch | 27 -- ...or-qcom_spmi-add-support-for-HT_P150.patch | 58 --- ...or-qcom_spmi-add-support-for-HT_P600.patch | 59 --- ...pmi-add-support-for-PMP8074-regulato.patch | 68 --- ...om-pmic-gpio-add-support-for-PMP8074.patch | 25 -- ...i-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch | 26 -- ...qcom-socinfo-Add-IPQ8074-family-ID-s.patch | 50 --- ...ie-make-pipe-clock-rate-configurable.patch | 47 -- ...e-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch | 200 --------- ...3_RELATED-DBI-definitions-to-common-.patch | 46 -- ...slot-capabilities-using-PCI_EXP_SLTC.patch | 51 --- ...-ops-with-struct-pcie_cfg-in-pcie-ma.patch | 122 ----- ...77-v6.0-PCI-qcom-Add-IPQ60xx-support.patch | 220 --------- ...che-CFG-register-updates-for-parked-.patch | 288 ------------ 58 files changed, 3654 deletions(-) delete mode 100644 target/linux/ipq807x/patches-6.1/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch delete mode 100644 target/linux/ipq807x/patches-6.1/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch diff --git a/target/linux/ipq807x/patches-6.1/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch b/target/linux/ipq807x/patches-6.1/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch deleted file mode 100644 index f1c092330121..000000000000 --- a/target/linux/ipq807x/patches-6.1/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch +++ /dev/null @@ -1,43 +0,0 @@ -From adf62d2727d4aa2b587e2db59eafb5be776a653c Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 5 Sep 2021 18:58:16 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add SPMI bus - -IPQ8074 uses SPMI for communication with the PMIC, so -since its already supported add the DT node for it. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20210905165816.655275-1-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -320,6 +320,25 @@ - #reset-cells = <0x1>; - }; - -+ spmi_bus: spmi@200f000 { -+ compatible = "qcom,spmi-pmic-arb"; -+ reg = <0x0200f000 0x001000>, -+ <0x02400000 0x800000>, -+ <0x02c00000 0x800000>, -+ <0x03800000 0x200000>, -+ <0x0200a000 0x000700>; -+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; -+ interrupts = ; -+ interrupt-names = "periph_irq"; -+ qcom,ee = <0>; -+ qcom,channel = <0>; -+ #address-cells = <2>; -+ #size-cells = <0>; -+ interrupt-controller; -+ #interrupt-cells = <4>; -+ cell-index = <0>; -+ }; -+ - sdhc_1: sdhci@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x500>, <0x7824000 0x800>; diff --git a/target/linux/ipq807x/patches-6.1/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch b/target/linux/ipq807x/patches-6.1/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch deleted file mode 100644 index 0e31970a829b..000000000000 --- a/target/linux/ipq807x/patches-6.1/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 94343612f165fc8b4f95fcbe6fd044d6f63d4a28 Mon Sep 17 00:00:00 2001 -From: Shawn Guo -Date: Tue, 31 Aug 2021 13:23:25 +0800 -Subject: [PATCH] arm64: dts: qcom: Update BAM DMA node name per DT schema - -Follow dma-controller.yaml schema to use `dma-controller` as node name -of BAM DMA devices. - -Signed-off-by: Shawn Guo -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20210831052325.21229-1-shawn.guo@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -239,7 +239,7 @@ - status = "disabled"; - }; - -- cryptobam: dma@704000 { -+ cryptobam: dma-controller@704000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x00704000 0x20000>; - interrupts = ; diff --git a/target/linux/ipq807x/patches-6.1/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch b/target/linux/ipq807x/patches-6.1/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch deleted file mode 100644 index b20cbe1b37c3..000000000000 --- a/target/linux/ipq807x/patches-6.1/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch +++ /dev/null @@ -1,40 +0,0 @@ -From ccc5b088058bccdf454bd296867c47e56c415cde Mon Sep 17 00:00:00 2001 -From: Chukun Pan -Date: Fri, 1 Oct 2021 22:54:21 +0800 -Subject: [PATCH] arm64: dts: qcom: ipq8074: Add QUP5 I2C node - -Add node to support the QUP5 I2C controller inside of IPQ8074. -It is exactly the same as QUP2 controllers. -Some routers like ZTE MF269 use this bus. - -Signed-off-by: Chukun Pan -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -457,6 +457,21 @@ - status = "disabled"; - }; - -+ blsp1_i2c5: i2c@78b9000 { -+ compatible = "qcom,i2c-qup-v2.2.1"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x78b9000 0x600>; -+ interrupts = ; -+ clocks = <&gcc GCC_BLSP1_AHB_CLK>, -+ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; -+ clock-names = "iface", "core"; -+ clock-frequency = <400000>; -+ dmas = <&blsp_dma 21>, <&blsp_dma 20>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ - blsp1_i2c6: i2c@78ba000 { - compatible = "qcom,i2c-qup-v2.2.1"; - #address-cells = <1>; diff --git a/target/linux/ipq807x/patches-6.1/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch b/target/linux/ipq807x/patches-6.1/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch deleted file mode 100644 index 94fc27750c8a..000000000000 --- a/target/linux/ipq807x/patches-6.1/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 1a82d7080001d395563ad8266d120d4cf63ad0a5 Mon Sep 17 00:00:00 2001 -From: Shawn Guo -Date: Wed, 29 Sep 2021 11:42:46 +0800 -Subject: [PATCH] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY - child node - -'#clock-cells' is a required property of QMP PHY child node, not itself. -Move it to fix the dtbs_check warnings. - -There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because -child nodes already have the property. - -Signed-off-by: Shawn Guo -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -91,7 +91,6 @@ - ssphy_1: phy@58000 { - compatible = "qcom,ipq8074-qmp-usb3-phy"; - reg = <0x00058000 0x1c4>; -- #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; -@@ -112,6 +111,7 @@ - <0x00058800 0x1f8>, /* PCS */ - <0x00058600 0x044>; /* PCS misc*/ - #phy-cells = <0>; -+ #clock-cells = <1>; - clocks = <&gcc GCC_USB1_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_1_cc_pipe_clk"; -@@ -134,7 +134,6 @@ - ssphy_0: phy@78000 { - compatible = "qcom,ipq8074-qmp-usb3-phy"; - reg = <0x00078000 0x1c4>; -- #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; -@@ -155,6 +154,7 @@ - <0x00078800 0x1f8>, /* PCS */ - <0x00078600 0x044>; /* PCS misc*/ - #phy-cells = <0>; -+ #clock-cells = <1>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_0_cc_pipe_clk"; diff --git a/target/linux/ipq807x/patches-6.1/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch b/target/linux/ipq807x/patches-6.1/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch deleted file mode 100644 index b31c06cb582c..000000000000 --- a/target/linux/ipq807x/patches-6.1/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 036e332e29ee24396ad877cc6a1275d86a1c4b3d Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 7 Oct 2021 13:58:46 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add MDIO bus - -IPQ8074 uses an IPQ4019 compatible MDIO controller that is already -supported in the kernel, so add the DT node in order to use it. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20211007115846.26255-1-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -231,6 +231,18 @@ - }; - }; - -+ mdio: mdio@90000 { -+ compatible = "qcom,ipq4019-mdio"; -+ reg = <0x00090000 0x64>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ clocks = <&gcc GCC_MDIO_AHB_CLK>; -+ clock-names = "gcc_mdio_ahb_clk"; -+ -+ status = "disabled"; -+ }; -+ - prng: rng@e3000 { - compatible = "qcom,prng-ee"; - reg = <0x000e3000 0x1000>; diff --git a/target/linux/ipq807x/patches-6.1/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch b/target/linux/ipq807x/patches-6.1/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch deleted file mode 100644 index afaa2bae8294..000000000000 --- a/target/linux/ipq807x/patches-6.1/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 29e135cf87900ac1da457bb27e98e30ca7f723ea Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 6 Jan 2022 22:25:12 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add SMEM support - -IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already -supported by the kernel add the required DT nodes. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -76,6 +76,20 @@ - method = "smc"; - }; - -+ reserved-memory { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ ranges; -+ -+ smem@4ab00000 { -+ compatible = "qcom,smem"; -+ reg = <0x0 0x4ab00000 0x0 0x00100000>; -+ no-map; -+ -+ hwlocks = <&tcsr_mutex 0>; -+ }; -+ }; -+ - firmware { - scm { - compatible = "qcom,scm-ipq8074", "qcom,scm"; -@@ -332,6 +346,12 @@ - #reset-cells = <0x1>; - }; - -+ tcsr_mutex: hwlock@1905000 { -+ compatible = "qcom,tcsr-mutex"; -+ reg = <0x01905000 0x20000>; -+ #hwlock-cells = <1>; -+ }; -+ - spmi_bus: spmi@200f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0200f000 0x001000>, diff --git a/target/linux/ipq807x/patches-6.1/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch b/target/linux/ipq807x/patches-6.1/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch deleted file mode 100644 index 6b0db7092db9..000000000000 --- a/target/linux/ipq807x/patches-6.1/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 0f1cdeea7f237de21f244c06f2c102f93dbd9c4e Mon Sep 17 00:00:00 2001 -From: Kathiravan T -Date: Fri, 7 Jan 2022 18:24:38 +0530 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add the reserved-memory node - -On IPQ8074, 4MB of memory is needed for TZ. So mark that region -as reserved. - -Signed-off-by: Kathiravan T -[bjorn: Squash with existing reserved-memory node] -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -88,6 +88,11 @@ - - hwlocks = <&tcsr_mutex 0>; - }; -+ -+ memory@4ac00000 { -+ no-map; -+ reg = <0x0 0x4ac00000 0x0 0x00400000>; -+ }; - }; - - firmware { diff --git a/target/linux/ipq807x/patches-6.1/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch b/target/linux/ipq807x/patches-6.1/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch deleted file mode 100644 index 3d5372a6e61f..000000000000 --- a/target/linux/ipq807x/patches-6.1/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch +++ /dev/null @@ -1,36 +0,0 @@ -From a505f23abf0c31f40a2c3070d82e961b7c045664 Mon Sep 17 00:00:00 2001 -From: Kathiravan T -Date: Tue, 8 Feb 2022 21:05:24 +0530 -Subject: [PATCH] arm64: dts: qcom: ipq8074: enable the GICv2m support - -GIC used in the IPQ8074 SoCs has one instance of the GICv2m extension, -which supports upto 32 MSI interrupts. Lets add support for the same. - -Signed-off-by: Kathiravan T -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/1644334525-11577-2-git-send-email-quic_kathirav@quicinc.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -635,9 +635,18 @@ - - intc: interrupt-controller@b000000 { - compatible = "qcom,msm-qgic2"; -+ #address-cells = <1>; -+ #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <0x3>; - reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; -+ ranges = <0 0xb00a000 0xffd>; -+ -+ v2m@0 { -+ compatible = "arm,gic-v2m-frame"; -+ msi-controller; -+ reg = <0x0 0xffd>; -+ }; - }; - - timer { diff --git a/target/linux/ipq807x/patches-6.1/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch b/target/linux/ipq807x/patches-6.1/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch deleted file mode 100644 index 9018087e4072..000000000000 --- a/target/linux/ipq807x/patches-6.1/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 2a73fa24be1d5a263062696f55dcc90725f9159c Mon Sep 17 00:00:00 2001 -From: Kathiravan T -Date: Wed, 2 Feb 2022 22:05:08 +0530 -Subject: [PATCH] arm64: dts: qcom: ipq8074: drop the clock-frequency property - -Drop the clock-frequency property from the MMIO timer node, since it -is already configured by the bootloader. - -Signed-off-by: Kathiravan T -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/1643819709-5410-2-git-send-email-quic_kathirav@quicinc.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 - - 1 file changed, 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -671,7 +671,6 @@ - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x0b120000 0x1000>; -- clock-frequency = <19200000>; - - frame@b120000 { - frame-number = <0>; diff --git a/target/linux/ipq807x/patches-6.1/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch b/target/linux/ipq807x/patches-6.1/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch deleted file mode 100644 index 19be9bd861b5..000000000000 --- a/target/linux/ipq807x/patches-6.1/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 6f39b05b13e7be39919fd8d235bb0e63ecabf190 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Tue, 5 Apr 2022 08:34:43 +0200 -Subject: [PATCH] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema - -The DT schema expects dma channels in tx-rx order. No functional -change. - -Signed-off-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220405063451.12011-2-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -472,8 +472,8 @@ - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; -- dmas = <&blsp_dma 15>, <&blsp_dma 14>; -- dma-names = "rx", "tx"; -+ dmas = <&blsp_dma 14>, <&blsp_dma 15>; -+ dma-names = "tx", "rx"; - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "disabled"; -@@ -489,8 +489,8 @@ - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <100000>; -- dmas = <&blsp_dma 17>, <&blsp_dma 16>; -- dma-names = "rx", "tx"; -+ dmas = <&blsp_dma 16>, <&blsp_dma 17>; -+ dma-names = "tx", "rx"; - status = "disabled"; - }; - -@@ -504,8 +504,8 @@ - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; -- dmas = <&blsp_dma 21>, <&blsp_dma 20>; -- dma-names = "rx", "tx"; -+ dmas = <&blsp_dma 20>, <&blsp_dma 21>; -+ dma-names = "tx", "rx"; - status = "disabled"; - }; - -@@ -519,8 +519,8 @@ - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <100000>; -- dmas = <&blsp_dma 23>, <&blsp_dma 22>; -- dma-names = "rx", "tx"; -+ dmas = <&blsp_dma 22>, <&blsp_dma 23>; -+ dma-names = "tx", "rx"; - status = "disabled"; - }; - diff --git a/target/linux/ipq807x/patches-6.1/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch b/target/linux/ipq807x/patches-6.1/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch deleted file mode 100644 index d1c214c2c783..000000000000 --- a/target/linux/ipq807x/patches-6.1/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 61d4a1751cfe5a22e5f18478fe16ffb1ee12607d Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Tue, 5 Apr 2022 08:34:44 +0200 -Subject: [PATCH] arm64: dts: qcom: align clocks in I2C/SPI with DT schema - -The DT schema expects clocks core-iface order. No functional change. - -Signed-off-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220405063451.12011-3-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 24 ++++++++++++------------ - 1 file changed, 12 insertions(+), 12 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -468,9 +468,9 @@ - #size-cells = <0>; - reg = <0x078b6000 0x600>; - interrupts = ; -- clocks = <&gcc GCC_BLSP1_AHB_CLK>, -- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; -- clock-names = "iface", "core"; -+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, -+ <&gcc GCC_BLSP1_AHB_CLK>; -+ clock-names = "core", "iface"; - clock-frequency = <400000>; - dmas = <&blsp_dma 14>, <&blsp_dma 15>; - dma-names = "tx", "rx"; -@@ -485,9 +485,9 @@ - #size-cells = <0>; - reg = <0x078b7000 0x600>; - interrupts = ; -- clocks = <&gcc GCC_BLSP1_AHB_CLK>, -- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; -- clock-names = "iface", "core"; -+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, -+ <&gcc GCC_BLSP1_AHB_CLK>; -+ clock-names = "core", "iface"; - clock-frequency = <100000>; - dmas = <&blsp_dma 16>, <&blsp_dma 17>; - dma-names = "tx", "rx"; -@@ -500,9 +500,9 @@ - #size-cells = <0>; - reg = <0x78b9000 0x600>; - interrupts = ; -- clocks = <&gcc GCC_BLSP1_AHB_CLK>, -- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; -- clock-names = "iface", "core"; -+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, -+ <&gcc GCC_BLSP1_AHB_CLK>; -+ clock-names = "core", "iface"; - clock-frequency = <400000>; - dmas = <&blsp_dma 20>, <&blsp_dma 21>; - dma-names = "tx", "rx"; -@@ -515,9 +515,9 @@ - #size-cells = <0>; - reg = <0x078ba000 0x600>; - interrupts = ; -- clocks = <&gcc GCC_BLSP1_AHB_CLK>, -- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; -- clock-names = "iface", "core"; -+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, -+ <&gcc GCC_BLSP1_AHB_CLK>; -+ clock-names = "core", "iface"; - clock-frequency = <100000>; - dmas = <&blsp_dma 22>, <&blsp_dma 23>; - dma-names = "tx", "rx"; diff --git a/target/linux/ipq807x/patches-6.1/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch b/target/linux/ipq807x/patches-6.1/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch deleted file mode 100644 index 1b41f9700241..000000000000 --- a/target/linux/ipq807x/patches-6.1/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch +++ /dev/null @@ -1,36 +0,0 @@ -From ee9002a825695b5dca76f758a9365ca7f7d18265 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 4 May 2022 15:19:16 +0200 -Subject: [PATCH] arm64: dts: qcom: correct DWC3 node names and unit addresses - -Align DWC3 USB node names with DT schema ("usb" is expected) and correct -the unit addresses to match the "reg" property. This also implies -overriding nodes by label, instead of full path. - -Signed-off-by: Krzysztof Kozlowski -Link: https://lore.kernel.org/r/20220504131923.214367-7-krzysztof.kozlowski@linaro.org -Signed-off-by: Greg Kroah-Hartman ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -579,7 +579,7 @@ - resets = <&gcc GCC_USB0_BCR>; - status = "disabled"; - -- dwc_0: dwc3@8a00000 { -+ dwc_0: usb@8a00000 { - compatible = "snps,dwc3"; - reg = <0x8a00000 0xcd00>; - interrupts = ; -@@ -619,7 +619,7 @@ - resets = <&gcc GCC_USB1_BCR>; - status = "disabled"; - -- dwc_1: dwc3@8c00000 { -+ dwc_1: usb@8c00000 { - compatible = "snps,dwc3"; - reg = <0x8c00000 0xcd00>; - interrupts = ; diff --git a/target/linux/ipq807x/patches-6.1/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch b/target/linux/ipq807x/patches-6.1/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch deleted file mode 100644 index 68173e81d2dd..000000000000 --- a/target/linux/ipq807x/patches-6.1/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 71061acf1a9343317e4d34a2c4578ed9301112cc Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 4 May 2022 15:19:17 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add dedicated qcom,ipq8074-dwc3 - compatible - -Add dedicated compatible for DWC3 USB node name to allow more accurate -DT schema matching. - -Signed-off-by: Krzysztof Kozlowski -Link: https://lore.kernel.org/r/20220504131923.214367-8-krzysztof.kozlowski@linaro.org -Signed-off-by: Greg Kroah-Hartman ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -554,7 +554,7 @@ - }; - - usb_0: usb@8af8800 { -- compatible = "qcom,dwc3"; -+ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; - reg = <0x08af8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; -@@ -594,7 +594,7 @@ - }; - - usb_1: usb@8cf8800 { -- compatible = "qcom,dwc3"; -+ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; - reg = <0x08cf8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-6.1/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch b/target/linux/ipq807x/patches-6.1/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch deleted file mode 100644 index de7c3eaffcd7..000000000000 --- a/target/linux/ipq807x/patches-6.1/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 159cbe595c1018a0172c637374ec69af643fa9f5 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 4 May 2022 15:19:22 +0200 -Subject: [PATCH] arm64: dts: qcom: align DWC3 USB clocks with DT schema - -Align order of clocks and their names with Qualcomm DWC3 USB DT schema. -No functional impact expected. - -Signed-off-by: Krzysztof Kozlowski -Link: https://lore.kernel.org/r/20220504131923.214367-13-krzysztof.kozlowski@linaro.org -Signed-off-by: Greg Kroah-Hartman ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -564,8 +564,8 @@ - <&gcc GCC_USB0_MASTER_CLK>, - <&gcc GCC_USB0_SLEEP_CLK>, - <&gcc GCC_USB0_MOCK_UTMI_CLK>; -- clock-names = "sys_noc_axi", -- "master", -+ clock-names = "cfg_noc", -+ "core", - "sleep", - "mock_utmi"; - -@@ -604,8 +604,8 @@ - <&gcc GCC_USB1_MASTER_CLK>, - <&gcc GCC_USB1_SLEEP_CLK>, - <&gcc GCC_USB1_MOCK_UTMI_CLK>; -- clock-names = "sys_noc_axi", -- "master", -+ clock-names = "cfg_noc", -+ "core", - "sleep", - "mock_utmi"; - diff --git a/target/linux/ipq807x/patches-6.1/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch b/target/linux/ipq807x/patches-6.1/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch deleted file mode 100644 index 515582da5c2a..000000000000 --- a/target/linux/ipq807x/patches-6.1/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch +++ /dev/null @@ -1,36 +0,0 @@ -From a9f7dc27469ca9588d7aa572bdfdfd5f0f1aab6a Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Thu, 26 May 2022 22:42:47 +0200 -Subject: [PATCH] arm64: dts: qcom: adjust whitespace around '=' - -Fix whitespace coding style: use single space instead of tabs or -multiple spaces around '=' sign in property assignment. No functional -changes (same DTB). - -Signed-off-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -119,7 +119,7 @@ - <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; - -- resets = <&gcc GCC_USB1_PHY_BCR>, -+ resets = <&gcc GCC_USB1_PHY_BCR>, - <&gcc GCC_USB3PHY_1_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; -@@ -162,7 +162,7 @@ - <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; - -- resets = <&gcc GCC_USB0_PHY_BCR>, -+ resets = <&gcc GCC_USB0_PHY_BCR>, - <&gcc GCC_USB3PHY_0_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; diff --git a/target/linux/ipq807x/patches-6.1/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch b/target/linux/ipq807x/patches-6.1/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch deleted file mode 100644 index 20f7dc926d9c..000000000000 --- a/target/linux/ipq807x/patches-6.1/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2e9703ffe97a1c447c0d00c061526fbeeade6107 Mon Sep 17 00:00:00 2001 -From: Bhupesh Sharma -Date: Sun, 15 May 2022 03:24:19 +0530 -Subject: [PATCH] arm64: dts: qcom: Fix sdhci node names - use 'mmc@' - -Since the Qualcomm sdhci-msm device-tree binding has been converted -to yaml format, 'make dtbs_check' reports issues with -inconsistent 'sdhci@' convention used for specifying the -sdhci nodes. The generic mmc bindings expect 'mmc@' format -instead. - -Fix the same. - -Cc: Bjorn Andersson -Cc: Rob Herring -Signed-off-by: Bhupesh Sharma -[bjorn: Moved non-arm64 changes to separate commit] -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -376,7 +376,7 @@ - cell-index = <0>; - }; - -- sdhc_1: sdhci@7824900 { -+ sdhc_1: mmc@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x500>, <0x7824000 0x800>; - reg-names = "hc_mem", "core_mem"; diff --git a/target/linux/ipq807x/patches-6.1/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch b/target/linux/ipq807x/patches-6.1/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch deleted file mode 100644 index 24fd7fc9f794..000000000000 --- a/target/linux/ipq807x/patches-6.1/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 18363f691e931abf0e9bdc9b5169fb15aa10224d Mon Sep 17 00:00:00 2001 -From: Bhupesh Sharma -Date: Sun, 15 May 2022 03:24:22 +0530 -Subject: [PATCH] arm64: dts: qcom: Fix ordering of 'clocks' & 'clock-names' - for sdhci nodes - -Since the Qualcomm sdhci-msm device-tree binding has been converted -to yaml format, 'make dtbs_check' reports a number of issues with -ordering of 'clocks' & 'clock-names' for sdhci nodes: - - arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: - clock-names:0: 'iface' was expected - - arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: - clock-names:1: 'core' was expected - - arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: - clock-names:2: 'xo' was expected - -Fix the same by updating the offending 'dts' files. - -Cc: Bjorn Andersson -Cc: Rob Herring -Signed-off-by: Bhupesh Sharma -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220514215424.1007718-5-bhupesh.sharma@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -385,10 +385,10 @@ - ; - interrupt-names = "hc_irq", "pwr_irq"; - -- clocks = <&xo>, -- <&gcc GCC_SDCC1_AHB_CLK>, -- <&gcc GCC_SDCC1_APPS_CLK>; -- clock-names = "xo", "iface", "core"; -+ clocks = <&gcc GCC_SDCC1_AHB_CLK>, -+ <&gcc GCC_SDCC1_APPS_CLK>, -+ <&xo>; -+ clock-names = "iface", "core", "xo"; - max-frequency = <384000000>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; diff --git a/target/linux/ipq807x/patches-6.1/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-6.1/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch deleted file mode 100644 index f2055d94b171..000000000000 --- a/target/linux/ipq807x/patches-6.1/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch +++ /dev/null @@ -1,25 +0,0 @@ -From aa14b0c11f6442cd489d33c2855941055a3d4fa6 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 15 May 2022 23:00:41 +0200 -Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add PPE crypto clock - -Add binding for the PPE crypto clock in IPQ8074. - -Signed-off-by: Robert Marko -Acked-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220515210048.483898-4-robimarko@gmail.com ---- - include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + - 1 file changed, 1 insertion(+) - ---- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h -@@ -233,6 +233,7 @@ - #define GCC_PCIE0_AXI_S_BRIDGE_CLK 224 - #define GCC_PCIE0_RCHNG_CLK_SRC 225 - #define GCC_PCIE0_RCHNG_CLK 226 -+#define GCC_CRYPTO_PPE_CLK 227 - - #define GCC_BLSP1_BCR 0 - #define GCC_BLSP1_QUP1_BCR 1 diff --git a/target/linux/ipq807x/patches-6.1/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-6.1/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch deleted file mode 100644 index 71fd33331df1..000000000000 --- a/target/linux/ipq807x/patches-6.1/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch +++ /dev/null @@ -1,52 +0,0 @@ -From f91d0e8bd6c1f812bc2589050c05a90ee886c749 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 15 May 2022 23:00:42 +0200 -Subject: [PATCH] clk: qcom: ipq8074: add PPE crypto clock - -The built-in PPE engine has a dedicated clock for the EIP-197 crypto -engine. - -So, since the required clock currently missing add support for it. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220515210048.483898-5-robimarko@gmail.com ---- - drivers/clk/qcom/gcc-ipq8074.c | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq8074.c -+++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -3183,6 +3183,24 @@ static struct clk_branch gcc_nss_ptp_ref - }, - }; - -+static struct clk_branch gcc_crypto_ppe_clk = { -+ .halt_reg = 0x68310, -+ .halt_bit = 31, -+ .clkr = { -+ .enable_reg = 0x68310, -+ .enable_mask = BIT(0), -+ .hw.init = &(struct clk_init_data){ -+ .name = "gcc_crypto_ppe_clk", -+ .parent_names = (const char *[]){ -+ "nss_ppe_clk_src" -+ }, -+ .num_parents = 1, -+ .flags = CLK_SET_RATE_PARENT, -+ .ops = &clk_branch2_ops, -+ }, -+ }, -+}; -+ - static struct clk_branch gcc_nssnoc_ce_apb_clk = { - .halt_reg = 0x6830c, - .clkr = { -@@ -4655,6 +4673,7 @@ static struct clk_regmap *gcc_ipq8074_cl - [GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr, - [GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr, - [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr, -+ [GCC_CRYPTO_PPE_CLK] = &gcc_crypto_ppe_clk.clkr, - }; - - static const struct qcom_reset_map gcc_ipq8074_resets[] = { diff --git a/target/linux/ipq807x/patches-6.1/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-6.1/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch deleted file mode 100644 index 908ed233b20d..000000000000 --- a/target/linux/ipq807x/patches-6.1/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch +++ /dev/null @@ -1,25 +0,0 @@ -From f5441c669d5442d247c69bab3eb27c074c0dd19a Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 15 May 2022 23:00:45 +0200 -Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add USB GDSCs - -Add bindings for the USB GDSCs found in IPQ8074 GCC. - -Signed-off-by: Robert Marko -Acked-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220515210048.483898-8-robimarko@gmail.com ---- - include/dt-bindings/clock/qcom,gcc-ipq8074.h | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h -@@ -368,4 +368,7 @@ - #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130 - #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131 - -+#define USB0_GDSC 0 -+#define USB1_GDSC 1 -+ - #endif diff --git a/target/linux/ipq807x/patches-6.1/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-6.1/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch deleted file mode 100644 index 7fcb19057832..000000000000 --- a/target/linux/ipq807x/patches-6.1/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch +++ /dev/null @@ -1,79 +0,0 @@ -From ff35d239b7b64f71d7dd9d0ce887647de2cacfcc Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 15 May 2022 23:00:46 +0200 -Subject: [PATCH] clk: qcom: ipq8074: add USB GDSCs - -Add GDSC-s for each of the two USB controllers built-in the IPQ8074. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220515210048.483898-9-robimarko@gmail.com ---- - drivers/clk/qcom/Kconfig | 1 + - drivers/clk/qcom/gcc-ipq8074.c | 24 ++++++++++++++++++++++++ - 2 files changed, 25 insertions(+) - ---- a/drivers/clk/qcom/Kconfig -+++ b/drivers/clk/qcom/Kconfig -@@ -166,6 +166,7 @@ config IPQ_LCC_806X - - config IPQ_GCC_8074 - tristate "IPQ8074 Global Clock Controller" -+ select QCOM_GDSC - help - Support for global clock controller on ipq8074 devices. - Say Y if you want to use peripheral devices such as UART, SPI, ---- a/drivers/clk/qcom/gcc-ipq8074.c -+++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -22,6 +22,7 @@ - #include "clk-alpha-pll.h" - #include "clk-regmap-divider.h" - #include "clk-regmap-mux.h" -+#include "gdsc.h" - #include "reset.h" - - enum { -@@ -4408,6 +4409,22 @@ static struct clk_branch gcc_pcie0_axi_s - }, - }; - -+static struct gdsc usb0_gdsc = { -+ .gdscr = 0x3e078, -+ .pd = { -+ .name = "usb0_gdsc", -+ }, -+ .pwrsts = PWRSTS_OFF_ON, -+}; -+ -+static struct gdsc usb1_gdsc = { -+ .gdscr = 0x3f078, -+ .pd = { -+ .name = "usb1_gdsc", -+ }, -+ .pwrsts = PWRSTS_OFF_ON, -+}; -+ - static const struct alpha_pll_config ubi32_pll_config = { - .l = 0x4e, - .config_ctl_val = 0x200d4aa8, -@@ -4811,6 +4828,11 @@ static const struct qcom_reset_map gcc_i - [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, - }; - -+static struct gdsc *gcc_ipq8074_gdscs[] = { -+ [USB0_GDSC] = &usb0_gdsc, -+ [USB1_GDSC] = &usb1_gdsc, -+}; -+ - static const struct of_device_id gcc_ipq8074_match_table[] = { - { .compatible = "qcom,gcc-ipq8074" }, - { } -@@ -4833,6 +4855,8 @@ static const struct qcom_cc_desc gcc_ipq - .num_resets = ARRAY_SIZE(gcc_ipq8074_resets), - .clk_hws = gcc_ipq8074_hws, - .num_clk_hws = ARRAY_SIZE(gcc_ipq8074_hws), -+ .gdscs = gcc_ipq8074_gdscs, -+ .num_gdscs = ARRAY_SIZE(gcc_ipq8074_gdscs), - }; - - static int gcc_ipq8074_probe(struct platform_device *pdev) diff --git a/target/linux/ipq807x/patches-6.1/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch b/target/linux/ipq807x/patches-6.1/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch deleted file mode 100644 index d515ec907621..000000000000 --- a/target/linux/ipq807x/patches-6.1/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 53211e85006ebb9bf7fb4482288639612f3146e7 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 15 May 2022 23:00:48 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add USB power domains - -Add USB power domains provided by GCC GDSCs. -Add the required #power-domain-cells to the GCC as well. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220515210048.483898-11-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -348,6 +348,7 @@ - compatible = "qcom,gcc-ipq8074"; - reg = <0x01800000 0x80000>; - #clock-cells = <0x1>; -+ #power-domain-cells = <1>; - #reset-cells = <0x1>; - }; - -@@ -576,6 +577,8 @@ - <133330000>, - <19200000>; - -+ power-domains = <&gcc USB0_GDSC>; -+ - resets = <&gcc GCC_USB0_BCR>; - status = "disabled"; - -@@ -616,6 +619,8 @@ - <133330000>, - <19200000>; - -+ power-domains = <&gcc USB1_GDSC>; -+ - resets = <&gcc GCC_USB1_BCR>; - status = "disabled"; - diff --git a/target/linux/ipq807x/patches-6.1/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch b/target/linux/ipq807x/patches-6.1/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch deleted file mode 100644 index 57fe73ae92a5..000000000000 --- a/target/linux/ipq807x/patches-6.1/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 85a9cab9b9bb471eae016cdbfabd928585c23cce Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 4 Jul 2022 13:33:18 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: move ARMv8 timer out of SoC node - -The ARM timer is usually considered not part of SoC node, just like -other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning: - -arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'} - From schema: dtschema/schemas/simple-bus.yaml - -Signed-off-by: Robert Marko -Acked-by: Krzysztof Kozlowski -[bjorn: Moved node after "soc" for alphabetical ordering] -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -654,14 +654,6 @@ - }; - }; - -- timer { -- compatible = "arm,armv8-timer"; -- interrupts = , -- , -- , -- ; -- }; -- - watchdog: watchdog@b017000 { - compatible = "qcom,kpss-wdt"; - reg = <0xb017000 0x1000>; -@@ -853,4 +845,12 @@ - status = "disabled"; - }; - }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = , -+ , -+ , -+ ; -+ }; - }; diff --git a/target/linux/ipq807x/patches-6.1/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch b/target/linux/ipq807x/patches-6.1/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch deleted file mode 100644 index b262a804b37a..000000000000 --- a/target/linux/ipq807x/patches-6.1/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 8e6af077ced3931ac18e37f0eb3fc6f1a20b0e4a Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 4 Jul 2022 16:35:54 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add reset to SDHCI - -Add reset to SDHCI controller so it can be reset to avoid timeout issues -after software reset due to bootloader set configuration. - -Signed-off-by: Robert Marko -Reviewed-by: Konrad Dybcio -Acked-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220704143554.1180927-2-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -390,6 +390,7 @@ - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo>; - clock-names = "iface", "core", "xo"; -+ resets = <&gcc GCC_SDCC1_BCR>; - max-frequency = <384000000>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; diff --git a/target/linux/ipq807x/patches-6.1/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch b/target/linux/ipq807x/patches-6.1/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch deleted file mode 100644 index c058c5abe4ee..000000000000 --- a/target/linux/ipq807x/patches-6.1/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 0171978734227bdd7813bc6d805f609126e3849e Mon Sep 17 00:00:00 2001 -From: Johan Hovold -Date: Tue, 5 Jul 2022 13:40:22 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: drop USB PHY clock index - -The QMP USB PHY provides a single clock so drop the redundant clock -index. - -Signed-off-by: Johan Hovold -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220705114032.22787-5-johan+linaro@kernel.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -130,7 +130,7 @@ - <0x00058800 0x1f8>, /* PCS */ - <0x00058600 0x044>; /* PCS misc*/ - #phy-cells = <0>; -- #clock-cells = <1>; -+ #clock-cells = <0>; - clocks = <&gcc GCC_USB1_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_1_cc_pipe_clk"; -@@ -173,7 +173,7 @@ - <0x00078800 0x1f8>, /* PCS */ - <0x00078600 0x044>; /* PCS misc*/ - #phy-cells = <0>; -- #clock-cells = <1>; -+ #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_0_cc_pipe_clk"; diff --git a/target/linux/ipq807x/patches-6.1/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch b/target/linux/ipq807x/patches-6.1/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch deleted file mode 100644 index e50c66f5317c..000000000000 --- a/target/linux/ipq807x/patches-6.1/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch +++ /dev/null @@ -1,74 +0,0 @@ -From a6e1d17fbfd41113bf47345e65953873e717ca63 Mon Sep 17 00:00:00 2001 -From: Shawn Guo -Date: Tue, 14 Sep 2021 09:40:48 +0800 -Subject: [PATCH] mailbox: qcom-apcs-ipc: Consolidate msm8994 type apcs_data - -The msm8994 type of apcs_data is defined multiple times with different -SoC name encoded. Consolidate them on msm8994 and remove the data -duplication. - -Signed-off-by: Shawn Guo -Signed-off-by: Jassi Brar ---- - drivers/mailbox/qcom-apcs-ipc-mailbox.c | 26 +++++-------------------- - 1 file changed, 5 insertions(+), 21 deletions(-) - ---- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c -+++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c -@@ -33,10 +33,6 @@ static const struct qcom_apcs_ipc_data i - .offset = 8, .clk_name = "qcom,apss-ipq6018-clk" - }; - --static const struct qcom_apcs_ipc_data ipq8074_apcs_data = { -- .offset = 8, .clk_name = NULL --}; -- - static const struct qcom_apcs_ipc_data msm8916_apcs_data = { - .offset = 8, .clk_name = "qcom-apcs-msm8916-clk" - }; -@@ -49,18 +45,6 @@ static const struct qcom_apcs_ipc_data m - .offset = 16, .clk_name = NULL - }; - --static const struct qcom_apcs_ipc_data msm8998_apcs_data = { -- .offset = 8, .clk_name = NULL --}; -- --static const struct qcom_apcs_ipc_data sdm660_apcs_data = { -- .offset = 8, .clk_name = NULL --}; -- --static const struct qcom_apcs_ipc_data sm6125_apcs_data = { -- .offset = 8, .clk_name = NULL --}; -- - static const struct qcom_apcs_ipc_data apps_shared_apcs_data = { - .offset = 12, .clk_name = NULL - }; -@@ -160,21 +144,21 @@ static int qcom_apcs_ipc_remove(struct p - /* .data is the offset of the ipc register within the global block */ - static const struct of_device_id qcom_apcs_ipc_of_match[] = { - { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data }, -- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq8074_apcs_data }, -+ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data }, - { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data }, - { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data }, - { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data }, - { .compatible = "qcom,msm8994-apcs-kpss-global", .data = &msm8994_apcs_data }, - { .compatible = "qcom,msm8996-apcs-hmss-global", .data = &msm8996_apcs_data }, -- { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8998_apcs_data }, -+ { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8994_apcs_data }, - { .compatible = "qcom,qcs404-apcs-apps-global", .data = &msm8916_apcs_data }, - { .compatible = "qcom,sc7180-apss-shared", .data = &apps_shared_apcs_data }, - { .compatible = "qcom,sc8180x-apss-shared", .data = &apps_shared_apcs_data }, -- { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &sdm660_apcs_data }, -+ { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &msm8994_apcs_data }, - { .compatible = "qcom,sdm845-apss-shared", .data = &apps_shared_apcs_data }, -- { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &sm6125_apcs_data }, -+ { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &msm8994_apcs_data }, - { .compatible = "qcom,sm8150-apss-shared", .data = &apps_shared_apcs_data }, -- { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &sdm660_apcs_data }, -+ { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &msm8994_apcs_data }, - { .compatible = "qcom,sdx55-apcs-gcc", .data = &sdx55_apcs_data }, - {} - }; diff --git a/target/linux/ipq807x/patches-6.1/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch b/target/linux/ipq807x/patches-6.1/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch deleted file mode 100644 index cd1dcf2ba2a4..000000000000 --- a/target/linux/ipq807x/patches-6.1/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 28e239ecd69a99748181bfdf5d2238ff1a8d0646 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:08:48 +0200 -Subject: [PATCH] mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock support - -IPQ8074 has the APSS clock controller utilizing the same register space as -the APCS, so provide access to the APSS utilizing a child device like -IPQ6018. - -IPQ6018 and IPQ8074 use the same controller and driver, so just utilize -IPQ6018 match data for IPQ8074. - -Signed-off-by: Robert Marko -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Jassi Brar ---- - drivers/mailbox/qcom-apcs-ipc-mailbox.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c -+++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c -@@ -144,7 +144,7 @@ static int qcom_apcs_ipc_remove(struct p - /* .data is the offset of the ipc register within the global block */ - static const struct of_device_id qcom_apcs_ipc_of_match[] = { - { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data }, -- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data }, -+ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq6018_apcs_data }, - { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data }, - { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data }, - { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data }, diff --git a/target/linux/ipq807x/patches-6.1/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch b/target/linux/ipq807x/patches-6.1/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch deleted file mode 100644 index 87a1fe82e738..000000000000 --- a/target/linux/ipq807x/patches-6.1/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch +++ /dev/null @@ -1,37 +0,0 @@ -From aea90e172420a062197849d7914b2fa032de0228 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 7 Jul 2022 19:37:33 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add APCS node - -APCS now has support for providing the APSS clocks as the child device -for IPQ8074. - -So, add the required DT node for it as it will later be used as the CPU -clocksource. - -Signed-off-by: Robert Marko -Reviewed-by: Dmitry Baryshkov -[bjorn: Sorted node based on address] -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707173733.404947-4-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -663,6 +663,14 @@ - timeout-sec = <30>; - }; - -+ apcs_glb: mailbox@b111000 { -+ compatible = "qcom,ipq8074-apcs-apps-global"; -+ reg = <0x0b111000 0x6000>; -+ -+ #clock-cells = <1>; -+ #mbox-cells = <1>; -+ }; -+ - timer@b120000 { - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-6.1/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch b/target/linux/ipq807x/patches-6.1/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch deleted file mode 100644 index 8fae8ade7532..000000000000 --- a/target/linux/ipq807x/patches-6.1/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch +++ /dev/null @@ -1,54 +0,0 @@ -From a3f36600fd758173c1ec315684e4ae72c6e85654 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 8 Jul 2022 15:38:45 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add #size/address-cells to DTSI - -Add #size-cells and #address-cells to the SoC DTSI to avoid duplicating -the same properties in board DTS files. - -Remove the mentioned properties from current board DTS files. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220708133846.599735-1-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 -- - arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 3 --- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 +++ - 3 files changed, 3 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -@@ -5,8 +5,6 @@ - #include "ipq8074.dtsi" - - / { -- #address-cells = <0x2>; -- #size-cells = <0x2>; - model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; - compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; - interrupt-parent = <&intc>; ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi -@@ -7,9 +7,6 @@ - #include "ipq8074.dtsi" - - / { -- #address-cells = <0x2>; -- #size-cells = <0x2>; -- - interrupt-parent = <&intc>; - - aliases { ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -7,6 +7,9 @@ - #include - - / { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ - model = "Qualcomm Technologies, Inc. IPQ8074"; - compatible = "qcom,ipq8074"; - diff --git a/target/linux/ipq807x/patches-6.1/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch b/target/linux/ipq807x/patches-6.1/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch deleted file mode 100644 index 27a43c43ea64..000000000000 --- a/target/linux/ipq807x/patches-6.1/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 7d57ca4d56856b7f7b97adda6e97cf5db4dcce93 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 8 Jul 2022 15:38:46 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add interrupt-parent to DTSI - -Add interrupt-parent to the SoC DTSI to avoid duplicating it in each board -DTS file. - -Remove interrupt-parent from existing board DTS files. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220708133846.599735-2-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 1 - - arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 2 -- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + - 3 files changed, 1 insertion(+), 3 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -@@ -7,7 +7,6 @@ - / { - model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; - compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; -- interrupt-parent = <&intc>; - - aliases { - serial0 = &blsp1_uart5; ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi -@@ -7,8 +7,6 @@ - #include "ipq8074.dtsi" - - / { -- interrupt-parent = <&intc>; -- - aliases { - serial0 = &blsp1_uart5; - }; ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -12,6 +12,7 @@ - - model = "Qualcomm Technologies, Inc. IPQ8074"; - compatible = "qcom,ipq8074"; -+ interrupt-parent = <&intc>; - - clocks { - sleep_clk: sleep_clk { diff --git a/target/linux/ipq807x/patches-6.1/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch b/target/linux/ipq807x/patches-6.1/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch deleted file mode 100644 index f2fce43e5e03..000000000000 --- a/target/linux/ipq807x/patches-6.1/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch +++ /dev/null @@ -1,28 +0,0 @@ -From a19df563230af392f2e84e57d69367f96b4a8c56 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Tue, 12 Jul 2022 16:42:43 +0200 -Subject: [PATCH] arm64: dts: qcom: align SDHCI reg-names with DT schema - -DT schema requires SDHCI reg names to be hc/core without "_mem" suffix, -just like TXT bindings were expecting before the conversion. - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Douglas Anderson -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220712144245.17417-4-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -384,7 +384,7 @@ - sdhc_1: mmc@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x500>, <0x7824000 0x800>; -- reg-names = "hc_mem", "core_mem"; -+ reg-names = "hc", "core"; - - interrupts = , - ; diff --git a/target/linux/ipq807x/patches-6.1/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch b/target/linux/ipq807x/patches-6.1/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch deleted file mode 100644 index 2faf82baebbd..000000000000 --- a/target/linux/ipq807x/patches-6.1/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 7bd608426c407a79debea54b2b243950f330c5b8 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:06:24 +0200 -Subject: [PATCH] clk: qcom: apss-ipq-pll: use OF match data for Alpha PLL - config - -Convert the driver to use OF match data for providing the Alpha PLL config -per compatible. -This is required for IPQ8074 support since it uses a different Alpha PLL -config. - -While we are here rename "ipq_pll_config" to "ipq6018_pll_config" to make -it clear that it is for IPQ6018 only. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220628.339366-5-robimarko@gmail.com ---- - drivers/clk/qcom/apss-ipq-pll.c | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/apss-ipq-pll.c -+++ b/drivers/clk/qcom/apss-ipq-pll.c -@@ -2,6 +2,7 @@ - // Copyright (c) 2018, The Linux Foundation. All rights reserved. - #include - #include -+#include - #include - #include - -@@ -36,7 +37,7 @@ static struct clk_alpha_pll ipq_pll = { - }, - }; - --static const struct alpha_pll_config ipq_pll_config = { -+static const struct alpha_pll_config ipq6018_pll_config = { - .l = 0x37, - .config_ctl_val = 0x04141200, - .config_ctl_hi_val = 0x0, -@@ -54,6 +55,7 @@ static const struct regmap_config ipq_pl - - static int apss_ipq_pll_probe(struct platform_device *pdev) - { -+ const struct alpha_pll_config *ipq_pll_config; - struct device *dev = &pdev->dev; - struct regmap *regmap; - void __iomem *base; -@@ -67,7 +69,11 @@ static int apss_ipq_pll_probe(struct pla - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - -- clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config); -+ ipq_pll_config = of_device_get_match_data(&pdev->dev); -+ if (!ipq_pll_config) -+ return -ENODEV; -+ -+ clk_alpha_pll_configure(&ipq_pll, regmap, ipq_pll_config); - - ret = devm_clk_register_regmap(dev, &ipq_pll.clkr); - if (ret) -@@ -78,7 +84,7 @@ static int apss_ipq_pll_probe(struct pla - } - - static const struct of_device_id apss_ipq_pll_match_table[] = { -- { .compatible = "qcom,ipq6018-a53pll" }, -+ { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config }, - { } - }; - MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table); diff --git a/target/linux/ipq807x/patches-6.1/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch b/target/linux/ipq807x/patches-6.1/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch deleted file mode 100644 index 4e1bb8aff2db..000000000000 --- a/target/linux/ipq807x/patches-6.1/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch +++ /dev/null @@ -1,40 +0,0 @@ -From d22c8f1bd94602d1bf2b377c3befe54e749b963d Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:06:25 +0200 -Subject: [PATCH] clk: qcom: apss-ipq-pll: update IPQ6018 Alpha PLL config - -Update the IPQ6018 Alpha PLL config to the latest one from the downstream -5.4 kernel[1]. - -This one should match the production SoC-s. - -Tested on IPQ6018 CP01-C1 reference board. - -[1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.1.r4/drivers/clk/qcom/apss-ipq-pll.c#L41 - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220628.339366-6-robimarko@gmail.com ---- - drivers/clk/qcom/apss-ipq-pll.c | 8 ++++++-- - 1 file changed, 6 insertions(+), 2 deletions(-) - ---- a/drivers/clk/qcom/apss-ipq-pll.c -+++ b/drivers/clk/qcom/apss-ipq-pll.c -@@ -39,10 +39,14 @@ static struct clk_alpha_pll ipq_pll = { - - static const struct alpha_pll_config ipq6018_pll_config = { - .l = 0x37, -- .config_ctl_val = 0x04141200, -- .config_ctl_hi_val = 0x0, -+ .config_ctl_val = 0x240d4828, -+ .config_ctl_hi_val = 0x6, - .early_output_mask = BIT(3), -+ .aux2_output_mask = BIT(2), -+ .aux_output_mask = BIT(1), - .main_output_mask = BIT(0), -+ .test_ctl_val = 0x1c0000C0, -+ .test_ctl_hi_val = 0x4000, - }; - - static const struct regmap_config ipq_pll_regmap_config = { diff --git a/target/linux/ipq807x/patches-6.1/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch b/target/linux/ipq807x/patches-6.1/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch deleted file mode 100644 index f5f18acb1b1a..000000000000 --- a/target/linux/ipq807x/patches-6.1/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch +++ /dev/null @@ -1,47 +0,0 @@ -From e0a711bd88ba98f6ab5118d248ec84fcf495d313 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:06:26 +0200 -Subject: [PATCH] clk: qcom: apss-ipq-pll: add support for IPQ8074 - -Add support for IPQ8074 since it uses the same PLL setup, however it uses -slightly different Alpha PLL config. - -Alpha PLL config was obtained by dumping PLL registers from a running -device. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220628.339366-7-robimarko@gmail.com ---- - drivers/clk/qcom/apss-ipq-pll.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/clk/qcom/apss-ipq-pll.c -+++ b/drivers/clk/qcom/apss-ipq-pll.c -@@ -49,6 +49,18 @@ static const struct alpha_pll_config ipq - .test_ctl_hi_val = 0x4000, - }; - -+static const struct alpha_pll_config ipq8074_pll_config = { -+ .l = 0x48, -+ .config_ctl_val = 0x200d4828, -+ .config_ctl_hi_val = 0x6, -+ .early_output_mask = BIT(3), -+ .aux2_output_mask = BIT(2), -+ .aux_output_mask = BIT(1), -+ .main_output_mask = BIT(0), -+ .test_ctl_val = 0x1c000000, -+ .test_ctl_hi_val = 0x4000, -+}; -+ - static const struct regmap_config ipq_pll_regmap_config = { - .reg_bits = 32, - .reg_stride = 4, -@@ -89,6 +101,7 @@ static int apss_ipq_pll_probe(struct pla - - static const struct of_device_id apss_ipq_pll_match_table[] = { - { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config }, -+ { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config }, - { } - }; - MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table); diff --git a/target/linux/ipq807x/patches-6.1/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch b/target/linux/ipq807x/patches-6.1/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch deleted file mode 100644 index 451066099dd0..000000000000 --- a/target/linux/ipq807x/patches-6.1/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch +++ /dev/null @@ -1,51 +0,0 @@ -From f7fb35d540240889a8f45f3fd42363cbc1a448e2 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Fri, 19 Aug 2022 00:06:20 +0200 -Subject: [PATCH] clk: qcom: clk-rcg2: add rcg2 mux ops - -An RCG may act as a mux that switch between 2 parents. -This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds -the CPU cluster clock just switches between XO and the PLL that feeds it. - -Add the required ops to add support for this special configuration and use -the generic mux function to determine the rate. - -This way we dont have to keep a essentially dummy frequency table to use -RCG2 as a mux. - -Signed-off-by: Christian Marangi -Signed-off-by: Robert Marko -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com ---- - drivers/clk/qcom/clk-rcg.h | 1 + - drivers/clk/qcom/clk-rcg2.c | 7 +++++++ - 2 files changed, 8 insertions(+) - ---- a/drivers/clk/qcom/clk-rcg.h -+++ b/drivers/clk/qcom/clk-rcg.h -@@ -164,6 +164,7 @@ struct clk_rcg2_gfx3d { - - extern const struct clk_ops clk_rcg2_ops; - extern const struct clk_ops clk_rcg2_floor_ops; -+extern const struct clk_ops clk_rcg2_mux_closest_ops; - extern const struct clk_ops clk_edp_pixel_ops; - extern const struct clk_ops clk_byte_ops; - extern const struct clk_ops clk_byte2_ops; ---- a/drivers/clk/qcom/clk-rcg2.c -+++ b/drivers/clk/qcom/clk-rcg2.c -@@ -477,6 +477,13 @@ const struct clk_ops clk_rcg2_floor_ops - }; - EXPORT_SYMBOL_GPL(clk_rcg2_floor_ops); - -+const struct clk_ops clk_rcg2_mux_closest_ops = { -+ .determine_rate = __clk_mux_determine_rate_closest, -+ .get_parent = clk_rcg2_get_parent, -+ .set_parent = clk_rcg2_set_parent, -+}; -+EXPORT_SYMBOL_GPL(clk_rcg2_mux_closest_ops); -+ - struct frac_entry { - int num; - int den; diff --git a/target/linux/ipq807x/patches-6.1/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch b/target/linux/ipq807x/patches-6.1/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch deleted file mode 100644 index c279e2804e7e..000000000000 --- a/target/linux/ipq807x/patches-6.1/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 6b9d5ecd2913758780a0529f9b95392f330b721b Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:06:21 +0200 -Subject: [PATCH] clk: qcom: apss-ipq6018: fix apcs_alias0_clk_src - -While working on IPQ8074 APSS driver it was discovered that IPQ6018 and -IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is -currently broken. - -More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux -clock. -However after debugging why it was always stuck at 800Mhz, it was figured -out that its not regmap_mux compatible at all. -It is a simple mux but it uses RCG2 register layout and control bits, so -utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not -having to provide a dummy frequency table. - -While we are here, use ARRAY_SIZE for number of parents. - -Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards. - -Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller") -Signed-off-by: Robert Marko -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com ---- - drivers/clk/qcom/apss-ipq6018.c | 13 ++++++------- - 1 file changed, 6 insertions(+), 7 deletions(-) - ---- a/drivers/clk/qcom/apss-ipq6018.c -+++ b/drivers/clk/qcom/apss-ipq6018.c -@@ -16,7 +16,7 @@ - #include "clk-regmap.h" - #include "clk-branch.h" - #include "clk-alpha-pll.h" --#include "clk-regmap-mux.h" -+#include "clk-rcg.h" - - enum { - P_XO, -@@ -33,16 +33,15 @@ static const struct parent_map parents_a - { P_APSS_PLL_EARLY, 5 }, - }; - --static struct clk_regmap_mux apcs_alias0_clk_src = { -- .reg = 0x0050, -- .width = 3, -- .shift = 7, -+static struct clk_rcg2 apcs_alias0_clk_src = { -+ .cmd_rcgr = 0x0050, -+ .hid_width = 5, - .parent_map = parents_apcs_alias0_clk_src_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "apcs_alias0_clk_src", - .parent_data = parents_apcs_alias0_clk_src, -- .num_parents = 2, -- .ops = &clk_regmap_mux_closest_ops, -+ .num_parents = ARRAY_SIZE(parents_apcs_alias0_clk_src), -+ .ops = &clk_rcg2_mux_closest_ops, - .flags = CLK_SET_RATE_PARENT, - }, - }; diff --git a/target/linux/ipq807x/patches-6.1/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch b/target/linux/ipq807x/patches-6.1/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch deleted file mode 100644 index 5c8ca8c54777..000000000000 --- a/target/linux/ipq807x/patches-6.1/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 23c5ff3143ce43a76eebdf60a93436de9db39a7a Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:06:27 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: correct APCS register space size - -APCS DTS addition that was merged, was not supposed to get merged as it -was part of patch series that was superseded by 2 more patch series -that resolved issues with this one and greatly simplified things. - -Since it already got merged, start by correcting the register space -size as APCS will not be providing regmap for PLL and it will conflict -with the standalone A53 PLL node. - -Fixes: 50ed9fffec3a ("arm64: dts: qcom: ipq8074: add APCS node") -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220628.339366-8-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -669,7 +669,7 @@ - - apcs_glb: mailbox@b111000 { - compatible = "qcom,ipq8074-apcs-apps-global"; -- reg = <0x0b111000 0x6000>; -+ reg = <0x0b111000 0x1000>; - - #clock-cells = <1>; - #mbox-cells = <1>; diff --git a/target/linux/ipq807x/patches-6.1/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch b/target/linux/ipq807x/patches-6.1/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch deleted file mode 100644 index 6a525f2c3e6a..000000000000 --- a/target/linux/ipq807x/patches-6.1/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 72bc31aa621e21a7c36a7da8aa6f6a77bb234e0b Mon Sep 17 00:00:00 2001 -From: Stephan Gerhold -Date: Wed, 6 Jul 2022 15:41:29 +0200 -Subject: [PATCH] clk: qcom: reset: Allow specifying custom reset delay - -The amount of time required between asserting and deasserting the reset -signal can vary depending on the involved hardware component. Sometimes -1 us might not be enough and a larger delay is necessary to conform to -the specifications. - -Usually this is worked around in the consuming drivers, by replacing -reset_control_reset() with a sequence of reset_control_assert(), waiting -for a custom delay, followed by reset_control_deassert(). - -However, in some cases the driver making use of the reset is generic and -can be used with different reset controllers. In this case the reset -time requirement is better handled directly by the reset controller -driver. - -Make this possible by adding an "udelay" field to the qcom_reset_map -that allows setting a different reset delay (in microseconds). - -Signed-off-by: Stephan Gerhold -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com ---- - drivers/clk/qcom/reset.c | 4 +++- - drivers/clk/qcom/reset.h | 1 + - 2 files changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/clk/qcom/reset.c -+++ b/drivers/clk/qcom/reset.c -@@ -13,8 +13,10 @@ - - static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id) - { -+ struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev); -+ - rcdev->ops->assert(rcdev, id); -- udelay(1); -+ udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */ - rcdev->ops->deassert(rcdev, id); - return 0; - } ---- a/drivers/clk/qcom/reset.h -+++ b/drivers/clk/qcom/reset.h -@@ -11,6 +11,7 @@ - struct qcom_reset_map { - unsigned int reg; - u8 bit; -+ u8 udelay; - }; - - struct regmap; diff --git a/target/linux/ipq807x/patches-6.1/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch b/target/linux/ipq807x/patches-6.1/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch deleted file mode 100644 index 35f4676a150d..000000000000 --- a/target/linux/ipq807x/patches-6.1/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 0afa47c1b57ba645225b38654869a6e5d2939da5 Mon Sep 17 00:00:00 2001 -From: Dmitry Baryshkov -Date: Fri, 6 May 2022 18:21:07 +0300 -Subject: [PATCH] arm64: dts: qcom: replace deprecated perst-gpio with - perst-gpios - -Replace deprecated perst-gpio and wake-gpio properties with up-to-date -perst-gpios and wake-gpios in the Qualcomm device trees. - -Acked-by: Krzysztof Kozlowski -Signed-off-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++-- - arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -@@ -49,12 +49,12 @@ - - &pcie0 { - status = "okay"; -- perst-gpio = <&tlmm 61 0x1>; -+ perst-gpios = <&tlmm 61 0x1>; - }; - - &pcie1 { - status = "okay"; -- perst-gpio = <&tlmm 58 0x1>; -+ perst-gpios = <&tlmm 58 0x1>; - }; - - &pcie_qmp0 { ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi -@@ -39,12 +39,12 @@ - - &pcie0 { - status = "ok"; -- perst-gpio = <&tlmm 58 0x1>; -+ perst-gpios = <&tlmm 58 0x1>; - }; - - &pcie1 { - status = "ok"; -- perst-gpio = <&tlmm 61 0x1>; -+ perst-gpios = <&tlmm 61 0x1>; - }; - - &pcie_phy0 { diff --git a/target/linux/ipq807x/patches-6.1/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch b/target/linux/ipq807x/patches-6.1/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch deleted file mode 100644 index 61aeb0b02967..000000000000 --- a/target/linux/ipq807x/patches-6.1/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0eda4c5c7704363f665f4ccf0327349faad245a4 Mon Sep 17 00:00:00 2001 -From: Caleb Connolly -Date: Fri, 29 Apr 2022 23:08:56 +0100 -Subject: [PATCH] spmi: add a helper to look up an SPMI device from a device - node - -The helper function spmi_device_from_of() takes a device node and -returns the SPMI device associated with it. -This is like of_find_device_by_node but for SPMI devices. - -Signed-off-by: Caleb Connolly -Acked-by: Stephen Boyd -Link: https://lore.kernel.org/r/20220429220904.137297-2-caleb.connolly@linaro.org -Signed-off-by: Jonathan Cameron ---- - drivers/spmi/spmi.c | 17 +++++++++++++++++ - include/linux/spmi.h | 3 +++ - 2 files changed, 20 insertions(+) - ---- a/drivers/spmi/spmi.c -+++ b/drivers/spmi/spmi.c -@@ -388,6 +388,23 @@ static struct bus_type spmi_bus_type = { - }; - - /** -+ * spmi_device_from_of() - get the associated SPMI device from a device node -+ * -+ * @np: device node -+ * -+ * Returns the struct spmi_device associated with a device node or NULL. -+ */ -+struct spmi_device *spmi_device_from_of(struct device_node *np) -+{ -+ struct device *dev = bus_find_device_by_of_node(&spmi_bus_type, np); -+ -+ if (dev) -+ return to_spmi_device(dev); -+ return NULL; -+} -+EXPORT_SYMBOL_GPL(spmi_device_from_of); -+ -+/** - * spmi_controller_alloc() - Allocate a new SPMI device - * @ctrl: associated controller - * ---- a/include/linux/spmi.h -+++ b/include/linux/spmi.h -@@ -164,6 +164,9 @@ static inline void spmi_driver_unregiste - module_driver(__spmi_driver, spmi_driver_register, \ - spmi_driver_unregister) - -+struct device_node; -+ -+struct spmi_device *spmi_device_from_of(struct device_node *np); - int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf); - int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf, - size_t len); diff --git a/target/linux/ipq807x/patches-6.1/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch b/target/linux/ipq807x/patches-6.1/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch deleted file mode 100644 index 02a37aa3767f..000000000000 --- a/target/linux/ipq807x/patches-6.1/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 60df90d6829d16338e2971420220395cfc289247 Mon Sep 17 00:00:00 2001 -From: Bjorn Andersson -Date: Sun, 17 Oct 2021 09:12:16 -0700 -Subject: [PATCH] mfd: qcom-spmi-pmic: Sort compatibles in the driver - -Sort the compatibles in the driver, to make it easier to validate that -the DT binding and driver are in sync. - -Signed-off-by: Bjorn Andersson -Signed-off-by: Lee Jones -Link: https://lore.kernel.org/r/20211017161218.2378176-2-bjorn.andersson@linaro.org ---- - drivers/mfd/qcom-spmi-pmic.c | 30 +++++++++++++++--------------- - 1 file changed, 15 insertions(+), 15 deletions(-) - ---- a/drivers/mfd/qcom-spmi-pmic.c -+++ b/drivers/mfd/qcom-spmi-pmic.c -@@ -40,27 +40,27 @@ - #define PM660_SUBTYPE 0x1B - - static const struct of_device_id pmic_spmi_id_table[] = { -- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, -- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, -- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, -+ { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, -+ { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, -+ { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, -+ { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, - { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, -- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, - { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, -- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, -- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, -- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, -- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, -- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, -- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, -- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, -+ { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, -+ { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, - { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, -+ { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, -+ { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, - { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, -- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, -+ { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, - { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, -+ { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, -+ { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, -+ { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, -+ { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, -+ { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, - { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, -- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, -- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, -- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, -+ { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, - { } - }; - diff --git a/target/linux/ipq807x/patches-6.1/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch b/target/linux/ipq807x/patches-6.1/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch deleted file mode 100644 index c2b3e8304dfd..000000000000 --- a/target/linux/ipq807x/patches-6.1/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 18921bfd81c88fb85a19683467f680897672f062 Mon Sep 17 00:00:00 2001 -From: Bjorn Andersson -Date: Sun, 17 Oct 2021 09:12:18 -0700 -Subject: [PATCH] mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo - -The Qualcomm socinfo driver has eight more PMICs described, add these to -the SPMI PMIC driver as well. - -Signed-off-by: Bjorn Andersson -Signed-off-by: Lee Jones -Link: https://lore.kernel.org/r/20211017161218.2378176-4-bjorn.andersson@linaro.org ---- - drivers/mfd/qcom-spmi-pmic.c | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/drivers/mfd/qcom-spmi-pmic.c -+++ b/drivers/mfd/qcom-spmi-pmic.c -@@ -31,6 +31,8 @@ - #define PM8916_SUBTYPE 0x0b - #define PM8004_SUBTYPE 0x0c - #define PM8909_SUBTYPE 0x0d -+#define PM8028_SUBTYPE 0x0e -+#define PM8901_SUBTYPE 0x0f - #define PM8950_SUBTYPE 0x10 - #define PMI8950_SUBTYPE 0x11 - #define PM8998_SUBTYPE 0x14 -@@ -38,6 +40,13 @@ - #define PM8005_SUBTYPE 0x18 - #define PM660L_SUBTYPE 0x1A - #define PM660_SUBTYPE 0x1B -+#define PM8150_SUBTYPE 0x1E -+#define PM8150L_SUBTYPE 0x1f -+#define PM8150B_SUBTYPE 0x20 -+#define PMK8002_SUBTYPE 0x21 -+#define PM8009_SUBTYPE 0x24 -+#define PM8150C_SUBTYPE 0x26 -+#define SMB2351_SUBTYPE 0x29 - - static const struct of_device_id pmic_spmi_id_table[] = { - { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, -@@ -45,9 +54,15 @@ static const struct of_device_id pmic_sp - { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, - { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, - { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, -+ { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, - { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, -+ { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, -+ { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, -+ { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, -+ { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, - { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, - { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, -+ { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, - { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, - { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, - { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, -@@ -60,6 +75,8 @@ static const struct of_device_id pmic_sp - { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, - { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, - { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, -+ { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, -+ { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, - { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, - { } - }; diff --git a/target/linux/ipq807x/patches-6.1/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch b/target/linux/ipq807x/patches-6.1/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch deleted file mode 100644 index 35e0cc672568..000000000000 --- a/target/linux/ipq807x/patches-6.1/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch +++ /dev/null @@ -1,417 +0,0 @@ -From 231f6a9f24a5e9b6e7af801ca2377970474cdf59 Mon Sep 17 00:00:00 2001 -From: Caleb Connolly -Date: Fri, 29 Apr 2022 23:08:57 +0100 -Subject: [PATCH] mfd: qcom-spmi-pmic: expose the PMIC revid information to - clients - -Some PMIC functions such as the RRADC need to be aware of the PMIC -chip revision information to implement errata or otherwise adjust -behaviour, export the PMIC information to enable this. - -This is specifically required to enable the RRADC to adjust -coefficients based on which chip fab the PMIC was produced in, -this can vary per unique device and therefore has to be read at -runtime. - -Signed-off-by: Caleb Connolly -Reviewed-by: Dmitry Baryshkov -Tested-by: Dmitry Baryshkov -Acked-by: Lee Jones -Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org -Signed-off-by: Jonathan Cameron ---- - drivers/mfd/qcom-spmi-pmic.c | 265 ++++++++++++++++++++---------- - include/soc/qcom/qcom-spmi-pmic.h | 60 +++++++ - 2 files changed, 235 insertions(+), 90 deletions(-) - create mode 100644 include/soc/qcom/qcom-spmi-pmic.h - ---- a/drivers/mfd/qcom-spmi-pmic.c -+++ b/drivers/mfd/qcom-spmi-pmic.c -@@ -3,11 +3,16 @@ - * Copyright (c) 2014, The Linux Foundation. All rights reserved. - */ - -+#include -+#include -+#include - #include - #include - #include -+#include - #include - #include -+#include - - #define PMIC_REV2 0x101 - #define PMIC_REV3 0x102 -@@ -17,106 +22,140 @@ - - #define PMIC_TYPE_VALUE 0x51 - --#define COMMON_SUBTYPE 0x00 --#define PM8941_SUBTYPE 0x01 --#define PM8841_SUBTYPE 0x02 --#define PM8019_SUBTYPE 0x03 --#define PM8226_SUBTYPE 0x04 --#define PM8110_SUBTYPE 0x05 --#define PMA8084_SUBTYPE 0x06 --#define PMI8962_SUBTYPE 0x07 --#define PMD9635_SUBTYPE 0x08 --#define PM8994_SUBTYPE 0x09 --#define PMI8994_SUBTYPE 0x0a --#define PM8916_SUBTYPE 0x0b --#define PM8004_SUBTYPE 0x0c --#define PM8909_SUBTYPE 0x0d --#define PM8028_SUBTYPE 0x0e --#define PM8901_SUBTYPE 0x0f --#define PM8950_SUBTYPE 0x10 --#define PMI8950_SUBTYPE 0x11 --#define PM8998_SUBTYPE 0x14 --#define PMI8998_SUBTYPE 0x15 --#define PM8005_SUBTYPE 0x18 --#define PM660L_SUBTYPE 0x1A --#define PM660_SUBTYPE 0x1B --#define PM8150_SUBTYPE 0x1E --#define PM8150L_SUBTYPE 0x1f --#define PM8150B_SUBTYPE 0x20 --#define PMK8002_SUBTYPE 0x21 --#define PM8009_SUBTYPE 0x24 --#define PM8150C_SUBTYPE 0x26 --#define SMB2351_SUBTYPE 0x29 -+#define PMIC_REV4_V2 0x02 -+ -+struct qcom_spmi_dev { -+ int num_usids; -+ struct qcom_spmi_pmic pmic; -+}; -+ -+#define N_USIDS(n) ((void *)n) - - static const struct of_device_id pmic_spmi_id_table[] = { -- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, -- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, -- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, -- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, -- { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, -- { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, -- { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, -- { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, -- { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, -- { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, -- { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, -- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, -- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, -- { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, -- { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, -- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, -- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, -- { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, -- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, -- { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, -- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, -- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, -- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, -- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, -- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, -- { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, -- { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, -- { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, -- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, -+ { .compatible = "qcom,pm660", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm660l", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8004", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8005", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8019", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8028", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8110", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8150", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8150b", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8150c", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8150l", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8226", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8841", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8901", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8909", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8916", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8941", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8950", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8994", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pm8998", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pma8084", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pmd9635", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pmi8950", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pmi8962", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, -+ { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, -+ { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, - { } - }; - --static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) -+/* -+ * A PMIC can be represented by multiple SPMI devices, but -+ * only the base PMIC device will contain a reference to -+ * the revision information. -+ * -+ * This function takes a pointer to a pmic device and -+ * returns a pointer to the base PMIC device. -+ * -+ * This only supports PMICs with 1 or 2 USIDs. -+ */ -+static struct spmi_device *qcom_pmic_get_base_usid(struct device *dev) - { -- unsigned int rev2, minor, major, type, subtype; -- const char *name = "unknown"; -- int ret, i; -+ struct spmi_device *sdev; -+ struct qcom_spmi_dev *ctx; -+ struct device_node *spmi_bus; -+ struct device_node *other_usid = NULL; -+ int function_parent_usid, ret; -+ u32 pmic_addr; - -- ret = regmap_read(map, PMIC_TYPE, &type); -- if (ret < 0) -- return; -+ sdev = to_spmi_device(dev); -+ ctx = dev_get_drvdata(&sdev->dev); - -- if (type != PMIC_TYPE_VALUE) -- return; -+ /* -+ * Quick return if the function device is already in the base -+ * USID. This will always be hit for PMICs with only 1 USID. -+ */ -+ if (sdev->usid % ctx->num_usids == 0) -+ return sdev; - -- ret = regmap_read(map, PMIC_SUBTYPE, &subtype); -+ function_parent_usid = sdev->usid; -+ -+ /* -+ * Walk through the list of PMICs until we find the sibling USID. -+ * The goal is to find the first USID which is less than the -+ * number of USIDs in the PMIC array, e.g. for a PMIC with 2 USIDs -+ * where the function device is under USID 3, we want to find the -+ * device for USID 2. -+ */ -+ spmi_bus = of_get_parent(sdev->dev.of_node); -+ do { -+ other_usid = of_get_next_child(spmi_bus, other_usid); -+ -+ ret = of_property_read_u32_index(other_usid, "reg", 0, &pmic_addr); -+ if (ret) -+ return ERR_PTR(ret); -+ -+ sdev = spmi_device_from_of(other_usid); -+ if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) { -+ if (!sdev) -+ /* -+ * If the base USID for this PMIC hasn't probed yet -+ * but the secondary USID has, then we need to defer -+ * the function driver so that it will attempt to -+ * probe again when the base USID is ready. -+ */ -+ return ERR_PTR(-EPROBE_DEFER); -+ return sdev; -+ } -+ } while (other_usid->sibling); -+ -+ return ERR_PTR(-ENODATA); -+} -+ -+static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, -+ struct qcom_spmi_pmic *pmic) -+{ -+ int ret; -+ -+ ret = regmap_read(map, PMIC_TYPE, &pmic->type); - if (ret < 0) -- return; -+ return ret; - -- for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { -- if (subtype == (unsigned long)pmic_spmi_id_table[i].data) -- break; -- } -+ if (pmic->type != PMIC_TYPE_VALUE) -+ return ret; - -- if (i != ARRAY_SIZE(pmic_spmi_id_table)) -- name = pmic_spmi_id_table[i].compatible; -+ ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); -+ if (ret < 0) -+ return ret; - -- ret = regmap_read(map, PMIC_REV2, &rev2); -+ pmic->name = of_match_device(pmic_spmi_id_table, dev)->compatible; -+ -+ ret = regmap_read(map, PMIC_REV2, &pmic->rev2); - if (ret < 0) -- return; -+ return ret; - -- ret = regmap_read(map, PMIC_REV3, &minor); -+ ret = regmap_read(map, PMIC_REV3, &pmic->minor); - if (ret < 0) -- return; -+ return ret; - -- ret = regmap_read(map, PMIC_REV4, &major); -+ ret = regmap_read(map, PMIC_REV4, &pmic->major); - if (ret < 0) -- return; -+ return ret; - - /* - * In early versions of PM8941 and PM8226, the major revision number -@@ -124,15 +163,49 @@ static void pmic_spmi_show_revid(struct - * Increment the major revision number here if the chip is an early - * version of PM8941 or PM8226. - */ -- if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && -- major < 0x02) -- major++; -+ if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && -+ pmic->major < PMIC_REV4_V2) -+ pmic->major++; -+ -+ if (pmic->subtype == PM8110_SUBTYPE) -+ pmic->minor = pmic->rev2; -+ -+ dev_dbg(dev, "%x: %s v%d.%d\n", -+ pmic->subtype, pmic->name, pmic->major, pmic->minor); -+ -+ return 0; -+} -+ -+/** -+ * qcom_pmic_get() - Get a pointer to the base PMIC device -+ * -+ * This function takes a struct device for a driver which is a child of a PMIC. -+ * And locates the PMIC revision information for it. -+ * -+ * @dev: the pmic function device -+ * @return: the struct qcom_spmi_pmic* pointer associated with the function device -+ */ -+const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) -+{ -+ struct spmi_device *sdev; -+ struct qcom_spmi_dev *spmi; -+ -+ /* -+ * Make sure the device is actually a child of a PMIC -+ */ -+ if (!of_match_device(pmic_spmi_id_table, dev->parent)) -+ return ERR_PTR(-EINVAL); -+ -+ sdev = qcom_pmic_get_base_usid(dev->parent); - -- if (subtype == PM8110_SUBTYPE) -- minor = rev2; -+ if (IS_ERR(sdev)) -+ return ERR_CAST(sdev); - -- dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); -+ spmi = dev_get_drvdata(&sdev->dev); -+ -+ return &spmi->pmic; - } -+EXPORT_SYMBOL(qcom_pmic_get); - - static const struct regmap_config spmi_regmap_config = { - .reg_bits = 16, -@@ -144,14 +217,26 @@ static const struct regmap_config spmi_r - static int pmic_spmi_probe(struct spmi_device *sdev) - { - struct regmap *regmap; -+ struct qcom_spmi_dev *ctx; -+ int ret; - - regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - -+ ctx = devm_kzalloc(&sdev->dev, sizeof(*ctx), GFP_KERNEL); -+ if (!ctx) -+ return -ENOMEM; -+ -+ ctx->num_usids = (uintptr_t)of_device_get_match_data(&sdev->dev); -+ - /* Only the first slave id for a PMIC contains this information */ -- if (sdev->usid % 2 == 0) -- pmic_spmi_show_revid(regmap, &sdev->dev); -+ if (sdev->usid % ctx->num_usids == 0) { -+ ret = pmic_spmi_load_revid(regmap, &sdev->dev, &ctx->pmic); -+ if (ret < 0) -+ return ret; -+ } -+ spmi_device_set_drvdata(sdev, ctx); - - return devm_of_platform_populate(&sdev->dev); - } ---- /dev/null -+++ b/include/soc/qcom/qcom-spmi-pmic.h -@@ -0,0 +1,60 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+/* Copyright (c) 2022 Linaro. All rights reserved. -+ * Author: Caleb Connolly -+ */ -+ -+#ifndef __QCOM_SPMI_PMIC_H__ -+#define __QCOM_SPMI_PMIC_H__ -+ -+#include -+ -+#define COMMON_SUBTYPE 0x00 -+#define PM8941_SUBTYPE 0x01 -+#define PM8841_SUBTYPE 0x02 -+#define PM8019_SUBTYPE 0x03 -+#define PM8226_SUBTYPE 0x04 -+#define PM8110_SUBTYPE 0x05 -+#define PMA8084_SUBTYPE 0x06 -+#define PMI8962_SUBTYPE 0x07 -+#define PMD9635_SUBTYPE 0x08 -+#define PM8994_SUBTYPE 0x09 -+#define PMI8994_SUBTYPE 0x0a -+#define PM8916_SUBTYPE 0x0b -+#define PM8004_SUBTYPE 0x0c -+#define PM8909_SUBTYPE 0x0d -+#define PM8028_SUBTYPE 0x0e -+#define PM8901_SUBTYPE 0x0f -+#define PM8950_SUBTYPE 0x10 -+#define PMI8950_SUBTYPE 0x11 -+#define PM8998_SUBTYPE 0x14 -+#define PMI8998_SUBTYPE 0x15 -+#define PM8005_SUBTYPE 0x18 -+#define PM660L_SUBTYPE 0x1A -+#define PM660_SUBTYPE 0x1B -+#define PM8150_SUBTYPE 0x1E -+#define PM8150L_SUBTYPE 0x1f -+#define PM8150B_SUBTYPE 0x20 -+#define PMK8002_SUBTYPE 0x21 -+#define PM8009_SUBTYPE 0x24 -+#define PM8150C_SUBTYPE 0x26 -+#define SMB2351_SUBTYPE 0x29 -+ -+#define PMI8998_FAB_ID_SMIC 0x11 -+#define PMI8998_FAB_ID_GF 0x30 -+ -+#define PM660_FAB_ID_GF 0x0 -+#define PM660_FAB_ID_TSMC 0x2 -+#define PM660_FAB_ID_MX 0x3 -+ -+struct qcom_spmi_pmic { -+ unsigned int type; -+ unsigned int subtype; -+ unsigned int major; -+ unsigned int minor; -+ unsigned int rev2; -+ const char *name; -+}; -+ -+const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev); -+ -+#endif /* __QCOM_SPMI_PMIC_H__ */ diff --git a/target/linux/ipq807x/patches-6.1/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch b/target/linux/ipq807x/patches-6.1/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch deleted file mode 100644 index ecf8772bfd29..000000000000 --- a/target/linux/ipq807x/patches-6.1/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 0c309f4e86c827cd5fd2eb0e36d5d1f19927380d Mon Sep 17 00:00:00 2001 -From: Caleb Connolly -Date: Fri, 29 Apr 2022 23:08:58 +0100 -Subject: [PATCH] mfd: qcom-spmi-pmic: read fab id on supported PMICs - -The PMI8998 and PM660 expose the fab_id, this is needed by drivers like -the RRADC to calibrate ADC values. - -Signed-off-by: Caleb Connolly -Reviewed-by: Dmitry Baryshkov -Tested-by: Dmitry Baryshkov -Acked-by: Lee Jones -Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org -Signed-off-by: Jonathan Cameron ---- - drivers/mfd/qcom-spmi-pmic.c | 7 +++++++ - include/soc/qcom/qcom-spmi-pmic.h | 1 + - 2 files changed, 8 insertions(+) - ---- a/drivers/mfd/qcom-spmi-pmic.c -+++ b/drivers/mfd/qcom-spmi-pmic.c -@@ -19,6 +19,7 @@ - #define PMIC_REV4 0x103 - #define PMIC_TYPE 0x104 - #define PMIC_SUBTYPE 0x105 -+#define PMIC_FAB_ID 0x1f2 - - #define PMIC_TYPE_VALUE 0x51 - -@@ -157,6 +158,12 @@ static int pmic_spmi_load_revid(struct r - if (ret < 0) - return ret; - -+ if (pmic->subtype == PMI8998_SUBTYPE || pmic->subtype == PM660_SUBTYPE) { -+ ret = regmap_read(map, PMIC_FAB_ID, &pmic->fab_id); -+ if (ret < 0) -+ return ret; -+ } -+ - /* - * In early versions of PM8941 and PM8226, the major revision number - * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0). ---- a/include/soc/qcom/qcom-spmi-pmic.h -+++ b/include/soc/qcom/qcom-spmi-pmic.h -@@ -52,6 +52,7 @@ struct qcom_spmi_pmic { - unsigned int major; - unsigned int minor; - unsigned int rev2; -+ unsigned int fab_id; - const char *name; - }; - diff --git a/target/linux/ipq807x/patches-6.1/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-6.1/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch deleted file mode 100644 index 109a08aea349..000000000000 --- a/target/linux/ipq807x/patches-6.1/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 46878413ba10170aaa9b7c797816e928a11923e3 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:18:12 +0200 -Subject: [PATCH] mfd: qcom-spmi-pmic: Add support for PMP8074 - -Add support for PMP8074 PMIC which is a companion PMIC for the Qualcomm -IPQ8074 SoC-s. - -It shares the same subtype identifier as PM8901. - -Signed-off-by: Robert Marko -Signed-off-by: Lee Jones -Link: https://lore.kernel.org/r/20220818221815.346233-2-robimarko@gmail.com ---- - drivers/mfd/qcom-spmi-pmic.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/mfd/qcom-spmi-pmic.c -+++ b/drivers/mfd/qcom-spmi-pmic.c -@@ -60,6 +60,7 @@ static const struct of_device_id pmic_sp - { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, - { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, - { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, -+ { .compatible = "qcom,pmp8074", .data = N_USIDS(2) }, - { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, - { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, - { } diff --git a/target/linux/ipq807x/patches-6.1/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch b/target/linux/ipq807x/patches-6.1/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch deleted file mode 100644 index b0dbe7d088e7..000000000000 --- a/target/linux/ipq807x/patches-6.1/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch +++ /dev/null @@ -1,58 +0,0 @@ -From dedc087d43013ab6043dd1da4cd585dd4242a6bb Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 4 Jul 2022 23:23:54 +0200 -Subject: [PATCH] regulator: qcom_spmi: add support for HT_P150 - -HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout -found in PMP8074 and PMS405 PMIC-s. - -Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V -but the actual MAX output voltage depends on the exact LDO in each of -the PMIC-s. - -It has a max current of 150mA, voltage step of 8mV. - -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20220704212402.1715182-4-robimarko@gmail.com -Signed-off-by: Mark Brown ---- - drivers/regulator/qcom_spmi-regulator.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/regulator/qcom_spmi-regulator.c -+++ b/drivers/regulator/qcom_spmi-regulator.c -@@ -164,6 +164,7 @@ enum spmi_regulator_subtype { - SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f, - SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, - SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, -+ SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35, - }; - - enum spmi_common_regulator_registers { -@@ -544,6 +545,10 @@ static struct spmi_voltage_range hfs430_ - SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000), - }; - -+static struct spmi_voltage_range ht_p150_ranges[] = { -+ SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000), -+}; -+ - static DEFINE_SPMI_SET_POINTS(pldo); - static DEFINE_SPMI_SET_POINTS(nldo1); - static DEFINE_SPMI_SET_POINTS(nldo2); -@@ -564,6 +569,7 @@ static DEFINE_SPMI_SET_POINTS(nldo660); - static DEFINE_SPMI_SET_POINTS(ht_lvpldo); - static DEFINE_SPMI_SET_POINTS(ht_nldo); - static DEFINE_SPMI_SET_POINTS(hfs430); -+static DEFINE_SPMI_SET_POINTS(ht_p150); - - static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, - int len) -@@ -1458,6 +1464,7 @@ static const struct regulator_ops spmi_h - - static const struct spmi_regulator_mapping supported_regulators[] = { - /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ -+ SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000), - SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), - SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), - SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000), diff --git a/target/linux/ipq807x/patches-6.1/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch b/target/linux/ipq807x/patches-6.1/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch deleted file mode 100644 index 6b76f2c3fc3e..000000000000 --- a/target/linux/ipq807x/patches-6.1/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 14789f38e03c42857613b69ff0f032e03653b246 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 4 Jul 2022 23:23:55 +0200 -Subject: [PATCH] regulator: qcom_spmi: add support for HT_P600 - -HT_P600 is a LDO PMOS regulator based on LV P600 using HFS430 layout -found in PMP8074 and PMS405 PMIC-s. - -Both PMP8074 and PMS405 define the programmable range as 1.704 to 1.896V -but the actual MAX output voltage depends on the exact LDO in each of -the PMIC-s. -Their usual voltage that they are used is 1.8V. - -It has a max current of 600mA, voltage step of 8mV. - -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20220704212402.1715182-5-robimarko@gmail.com -Signed-off-by: Mark Brown ---- - drivers/regulator/qcom_spmi-regulator.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/regulator/qcom_spmi-regulator.c -+++ b/drivers/regulator/qcom_spmi-regulator.c -@@ -165,6 +165,7 @@ enum spmi_regulator_subtype { - SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, - SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, - SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35, -+ SPMI_REGULATOR_SUBTYPE_HT_P600 = 0x3d, - }; - - enum spmi_common_regulator_registers { -@@ -549,6 +550,10 @@ static struct spmi_voltage_range ht_p150 - SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000), - }; - -+static struct spmi_voltage_range ht_p600_ranges[] = { -+ SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000), -+}; -+ - static DEFINE_SPMI_SET_POINTS(pldo); - static DEFINE_SPMI_SET_POINTS(nldo1); - static DEFINE_SPMI_SET_POINTS(nldo2); -@@ -570,6 +575,7 @@ static DEFINE_SPMI_SET_POINTS(ht_lvpldo) - static DEFINE_SPMI_SET_POINTS(ht_nldo); - static DEFINE_SPMI_SET_POINTS(hfs430); - static DEFINE_SPMI_SET_POINTS(ht_p150); -+static DEFINE_SPMI_SET_POINTS(ht_p600); - - static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, - int len) -@@ -1464,6 +1470,7 @@ static const struct regulator_ops spmi_h - - static const struct spmi_regulator_mapping supported_regulators[] = { - /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ -+ SPMI_VREG(LDO, HT_P600, 0, INF, HFS430, hfs430, ht_p600, 10000), - SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000), - SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), - SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), diff --git a/target/linux/ipq807x/patches-6.1/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch b/target/linux/ipq807x/patches-6.1/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch deleted file mode 100644 index ce6985b13bf8..000000000000 --- a/target/linux/ipq807x/patches-6.1/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 3e3da8da25f81fa3f0f3a37f60d10b17d1166864 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 4 Jul 2022 23:23:57 +0200 -Subject: [PATCH] regulator: qcom_spmi: add support for PMP8074 regulators - -PMP8074 is a companion PMIC for the Qualcomm IPQ8074 WiSoC-s. - -It features 5 HF-SMPS and 13 LDO regulators. - -HF-SMPS regulators are Buck HFS430 regulators. -L1, L2 and L3 are HT_N1200_ST subtype LDO regulators. -L4 is HT_N300_ST subtype LDO regulator. -L5 and L6 are HT_P600 subtype LDO regulators. -L7, L11, L12 and L13 are HT_P150 subtype LDO regulators. -L10 is HT_P50 subtype LDO regulator. - -This commit adds support for all of the buck regulators and LDO-s except -for L10 as I dont have documentation on its output voltage range. - -S3 is the CPU cluster voltage supply, S4 supplies the UBI32 NPU cores -and L11 is the SDIO/eMMC I/O voltage regulator required for high speeds. - -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20220704212402.1715182-7-robimarko@gmail.com -Signed-off-by: Mark Brown ---- - drivers/regulator/qcom_spmi-regulator.c | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/drivers/regulator/qcom_spmi-regulator.c -+++ b/drivers/regulator/qcom_spmi-regulator.c -@@ -2101,6 +2101,28 @@ static const struct spmi_regulator_data - { } - }; - -+static const struct spmi_regulator_data pmp8074_regulators[] = { -+ { "s1", 0x1400, "vdd_s1"}, -+ { "s2", 0x1700, "vdd_s2"}, -+ { "s3", 0x1a00, "vdd_s3"}, -+ { "s4", 0x1d00, "vdd_s4"}, -+ { "s5", 0x2000, "vdd_s5"}, -+ { "l1", 0x4000, "vdd_l1_l2"}, -+ { "l2", 0x4100, "vdd_l1_l2"}, -+ { "l3", 0x4200, "vdd_l3_l8"}, -+ { "l4", 0x4300, "vdd_l4"}, -+ { "l5", 0x4400, "vdd_l5_l6_l15"}, -+ { "l6", 0x4500, "vdd_l5_l6_l15"}, -+ { "l7", 0x4600, "vdd_l7"}, -+ { "l8", 0x4700, "vdd_l3_l8"}, -+ { "l9", 0x4800, "vdd_l9"}, -+ /* l10 is currently unsupported HT_P50 */ -+ { "l11", 0x4a00, "vdd_l10_l11_l12_l13"}, -+ { "l12", 0x4b00, "vdd_l10_l11_l12_l13"}, -+ { "l13", 0x4c00, "vdd_l10_l11_l12_l13"}, -+ { } -+}; -+ - static const struct spmi_regulator_data pms405_regulators[] = { - { "s3", 0x1a00, "vdd_s3"}, - { } -@@ -2117,6 +2139,7 @@ static const struct of_device_id qcom_sp - { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators }, - { .compatible = "qcom,pm660-regulators", .data = &pm660_regulators }, - { .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators }, -+ { .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators }, - { .compatible = "qcom,pms405-regulators", .data = &pms405_regulators }, - { } - }; diff --git a/target/linux/ipq807x/patches-6.1/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-6.1/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch deleted file mode 100644 index ba3d1750e1fb..000000000000 --- a/target/linux/ipq807x/patches-6.1/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 204cd3516f59eb7040b814429187e674f49ba065 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 11 Jul 2022 22:34:05 +0200 -Subject: [PATCH] pinctrl: qcom-pmic-gpio: add support for PMP8074 - -PMP8074 has 12 GPIO-s with holes on GPIO1 and GPIO12. - -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20220711203408.2949888-4-robimarko@gmail.com -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c -+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c -@@ -1167,6 +1167,8 @@ static const struct of_device_id pmic_gp - { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 }, - { .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 }, -+ /* pmp8074 has 12 GPIOs with holes on 1 and 12 */ -+ { .compatible = "qcom,pmp8074-gpio", .data = (void *) 12 }, - { .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 }, - /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */ diff --git a/target/linux/ipq807x/patches-6.1/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch b/target/linux/ipq807x/patches-6.1/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch deleted file mode 100644 index 306f0dd2539e..000000000000 --- a/target/linux/ipq807x/patches-6.1/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 41a02abb863edca0de0373bc3deaf0639b18c589 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:18:13 +0200 -Subject: [PATCH] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5 - -Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list. -This channel measures the VADC reference LDO output. - -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20220818221815.346233-3-robimarko@gmail.com -Signed-off-by: Jonathan Cameron ---- - drivers/iio/adc/qcom-spmi-adc5.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/iio/adc/qcom-spmi-adc5.c -+++ b/drivers/iio/adc/qcom-spmi-adc5.c -@@ -589,6 +589,8 @@ static const struct adc5_channels adc5_c - SCALE_HW_CALIB_DEFAULT) - [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, - SCALE_HW_CALIB_DEFAULT) -+ [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, -+ SCALE_HW_CALIB_DEFAULT) - [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, - SCALE_HW_CALIB_DEFAULT) - [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, diff --git a/target/linux/ipq807x/patches-6.1/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch b/target/linux/ipq807x/patches-6.1/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch deleted file mode 100644 index ed1b063972a9..000000000000 --- a/target/linux/ipq807x/patches-6.1/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch +++ /dev/null @@ -1,50 +0,0 @@ -From a212eb94fc9f72a126df651c5d7898feaea29526 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 5 Sep 2021 19:11:31 +0200 -Subject: [PATCH] soc: qcom: socinfo: Add IPQ8074 family ID-s - -IPQ8074 family SoC ID-s are missing, so lets add them based on -the downstream driver. - -Signed-off-by: Robert Marko -Reviewed-by: Kathiravan T -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20210905171131.660885-1-robimarko@gmail.com ---- - drivers/soc/qcom/socinfo.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/soc/qcom/socinfo.c -+++ b/drivers/soc/qcom/socinfo.c -@@ -281,19 +281,31 @@ static const struct soc_id soc_id[] = { - { 319, "APQ8098" }, - { 321, "SDM845" }, - { 322, "MDM9206" }, -+ { 323, "IPQ8074" }, - { 324, "SDA660" }, - { 325, "SDM658" }, - { 326, "SDA658" }, - { 327, "SDA630" }, - { 338, "SDM450" }, - { 341, "SDA845" }, -+ { 342, "IPQ8072" }, -+ { 343, "IPQ8076" }, -+ { 344, "IPQ8078" }, - { 345, "SDM636" }, - { 346, "SDA636" }, - { 349, "SDM632" }, - { 350, "SDA632" }, - { 351, "SDA450" }, - { 356, "SM8250" }, -+ { 375, "IPQ8070" }, -+ { 376, "IPQ8071" }, -+ { 389, "IPQ8072A" }, -+ { 390, "IPQ8074A" }, -+ { 391, "IPQ8076A" }, -+ { 392, "IPQ8078A" }, - { 394, "SM6125" }, -+ { 395, "IPQ8070A" }, -+ { 396, "IPQ8071A" }, - { 402, "IPQ6018" }, - { 403, "IPQ6028" }, - { 421, "IPQ6000" }, diff --git a/target/linux/ipq807x/patches-6.1/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch b/target/linux/ipq807x/patches-6.1/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch deleted file mode 100644 index 667c0cf7c71a..000000000000 --- a/target/linux/ipq807x/patches-6.1/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 2b0fe9137aa32d7fc367bf3a1cef4fa97ece6d58 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Tue, 23 Aug 2022 22:43:51 +0200 -Subject: [PATCH] phy: qcom-qmp-pcie: make pipe clock rate configurable - -IPQ8074 Gen3 PCIe PHY uses 250MHz as the pipe clock rate instead of 125MHz -like every other PCIe QMP PHY does, so make it configurable as part of the -qmp_phy_cfg. - -Signed-off-by: Robert Marko -Reviewed-by: Dmitry Baryshkov -Link: https://lore.kernel.org/r/20220621195512.1760362-1-robimarko@gmail.com -Signed-off-by: Vinod Koul ---- - drivers/phy/qualcomm/phy-qcom-qmp.c | 14 ++++++++++++-- - 1 file changed, 12 insertions(+), 2 deletions(-) - ---- a/drivers/phy/qualcomm/phy-qcom-qmp.c -+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c -@@ -2842,6 +2842,9 @@ struct qmp_phy_cfg { - /* true, if PHY has secondary tx/rx lanes to be configured */ - bool is_dual_lane_phy; - -+ /* QMP PHY pipe clock interface rate */ -+ unsigned long pipe_clock_rate; -+ - /* true, if PCS block has no separate SW_RESET register */ - bool no_pcs_sw_reset; - }; -@@ -5139,8 +5142,15 @@ static int phy_pipe_clk_register(struct - - init.ops = &clk_fixed_rate_ops; - -- /* controllers using QMP phys use 125MHz pipe clock interface */ -- fixed->fixed_rate = 125000000; -+ /* -+ * Controllers using QMP PHY-s use 125MHz pipe clock interface -+ * unless other frequency is specified in the PHY config. -+ */ -+ if (qmp->phys[0]->cfg->pipe_clock_rate) -+ fixed->fixed_rate = qmp->phys[0]->cfg->pipe_clock_rate; -+ else -+ fixed->fixed_rate = 125000000; -+ - fixed->hw.init = &init; - - ret = devm_clk_hw_register(qmp->dev, &fixed->hw); diff --git a/target/linux/ipq807x/patches-6.1/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch b/target/linux/ipq807x/patches-6.1/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch deleted file mode 100644 index 72aeef974e82..000000000000 --- a/target/linux/ipq807x/patches-6.1/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch +++ /dev/null @@ -1,200 +0,0 @@ -From 23bd21d8c05109b57aa9508e88fbdbc2b6d33de7 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Tue, 23 Aug 2022 22:47:40 +0200 -Subject: [PATCH] phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support - -IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3. -Gen2 one is already supported, so add the support for the Gen3 one. -It uses the same register layout as IPQ6018. - -Signed-off-by: Robert Marko -Reviewed-by: Dmitry Baryshkov -Link: https://lore.kernel.org/r/20220621195512.1760362-3-robimarko@gmail.com -Signed-off-by: Vinod Koul ---- - drivers/phy/qualcomm/phy-qcom-qmp.c | 160 ++++++++++++++++++++++++++++ - 1 file changed, 160 insertions(+) - ---- a/drivers/phy/qualcomm/phy-qcom-qmp.c -+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c -@@ -812,6 +812,133 @@ static const struct qmp_phy_init_tbl ipq - QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3), - }; - -+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_serdes_tbl[] = { -+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x31), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x01), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_MAP, 0x04), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER1, 0xff), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER2, 0x3f), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x30), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x21), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x82), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x03), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0x355), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0x35555), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x1a), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0x1a0a), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0xb), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE0, 0x0), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0x40), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x20), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV, 0xa), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TIMER, 0xa), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x1), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x68), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x2), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x2aa), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x2aaab), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x34), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0x3414), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x0b), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE1, 0x0), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0x40), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x0), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE0, 0x19), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE1, 0x28), -+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90), -+}; -+ -+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_tx_tbl[] = { -+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02), -+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12), -+ QMP_PHY_INIT_CFG(QSERDES_TX0_HIGHZ_DRVR_EN, 0x10), -+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06), -+}; -+ -+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_rx_tbl[] = { -+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0xe), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x4), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1b), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x2), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c), -+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02), -+}; -+ -+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_pcs_tbl[] = { -+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL2, 0x83), -+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_L, 0x9), -+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_H_TOL, 0x42), -+ QMP_PHY_INIT_CFG(PCS_COM_FLL_MAN_CODE, 0x40), -+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01), -+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H, 0x0), -+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x1), -+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x0), -+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H, 0x00), -+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), -+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H, 0x00), -+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), -+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11), -+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG2, 0xb), -+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07), -+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_CONFIG2, 0x52), -+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG2, 0x50), -+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG4, 0x1a), -+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x6), -+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10), -+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1), -+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01), -+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa), -+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d), -+}; -+ - static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = { - QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14), - QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), -@@ -3168,6 +3295,36 @@ static const struct qmp_phy_cfg ipq8074_ - .pwrdn_delay_max = 1005, /* us */ - }; - -+static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = { -+ .type = PHY_TYPE_PCIE, -+ .nlanes = 1, -+ -+ .serdes_tbl = ipq8074_pcie_gen3_serdes_tbl, -+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_serdes_tbl), -+ .tx_tbl = ipq8074_pcie_gen3_tx_tbl, -+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl), -+ .rx_tbl = ipq8074_pcie_gen3_rx_tbl, -+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_rx_tbl), -+ .pcs_tbl = ipq8074_pcie_gen3_pcs_tbl, -+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_pcs_tbl), -+ .clk_list = ipq8074_pciephy_clk_l, -+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), -+ .reset_list = ipq8074_pciephy_reset_l, -+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), -+ .vreg_list = NULL, -+ .num_vregs = 0, -+ .regs = ipq_pciephy_gen3_regs_layout, -+ -+ .start_ctrl = SERDES_START | PCS_START, -+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, -+ -+ .has_pwrdn_delay = true, -+ .pwrdn_delay_min = 995, /* us */ -+ .pwrdn_delay_max = 1005, /* us */ -+ -+ .pipe_clock_rate = 250000000, -+}; -+ - static const struct qmp_phy_cfg ipq6018_pciephy_cfg = { - .type = PHY_TYPE_PCIE, - .nlanes = 1, -@@ -5571,6 +5728,9 @@ static const struct of_device_id qcom_qm - .compatible = "qcom,ipq8074-qmp-pcie-phy", - .data = &ipq8074_pciephy_cfg, - }, { -+ .compatible = "qcom,ipq8074-qmp-gen3-pcie-phy", -+ .data = &ipq8074_pciephy_gen3_cfg, -+ }, { - .compatible = "qcom,ipq6018-qmp-pcie-phy", - .data = &ipq6018_pciephy_cfg, - }, { diff --git a/target/linux/ipq807x/patches-6.1/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch b/target/linux/ipq807x/patches-6.1/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch deleted file mode 100644 index 626507abb2db..000000000000 --- a/target/linux/ipq807x/patches-6.1/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 8df9fefd1d04f6f97f6015d7347104f69e6ea580 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Tue, 21 Jun 2022 11:54:52 +0300 -Subject: [PATCH] PCI: dwc: Move GEN3_RELATED DBI definitions to common header - -These are common dwc macros that will be used for other platforms. - -Link: https://lore.kernel.org/r/1c2d5a7a139be81fa15f356b2380163dbdebdc09.1655799816.git.baruch@tkos.co.il -Signed-off-by: Baruch Siach -Signed-off-by: Bjorn Helgaas -Reviewed-by: Rob Herring ---- - drivers/pci/controller/dwc/pcie-designware.h | 6 ++++++ - drivers/pci/controller/dwc/pcie-tegra194.c | 6 ------ - 2 files changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/pci/controller/dwc/pcie-designware.h -+++ b/drivers/pci/controller/dwc/pcie-designware.h -@@ -74,6 +74,12 @@ - #define PCIE_MSI_INTR0_MASK 0x82C - #define PCIE_MSI_INTR0_STATUS 0x830 - -+#define GEN3_RELATED_OFF 0x890 -+#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) -+#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) -+#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 -+#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) -+ - #define PCIE_PORT_MULTI_LANE_CTRL 0x8C0 - #define PORT_MLTI_UPCFG_SUPPORT BIT(7) - ---- a/drivers/pci/controller/dwc/pcie-tegra194.c -+++ b/drivers/pci/controller/dwc/pcie-tegra194.c -@@ -193,12 +193,6 @@ - #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK GENMASK(23, 8) - #define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0) - --#define GEN3_RELATED_OFF 0x890 --#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) --#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) --#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 --#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) -- - #define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0 - #define AMBA_ERROR_RESPONSE_CRS_SHIFT 3 - #define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0) diff --git a/target/linux/ipq807x/patches-6.1/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch b/target/linux/ipq807x/patches-6.1/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch deleted file mode 100644 index bc1464b12698..000000000000 --- a/target/linux/ipq807x/patches-6.1/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch +++ /dev/null @@ -1,51 +0,0 @@ -From d568739f1c21e1768a887ff85611769f782eb64f Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Tue, 21 Jun 2022 11:54:53 +0300 -Subject: [PATCH] PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* - -The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use -PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better -describe its meaning. - -Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il -Signed-off-by: Baruch Siach -Signed-off-by: Bjorn Helgaas -Reviewed-by: Rob Herring -Acked-by: Stanimir Varbanov ---- - drivers/pci/controller/dwc/pcie-qcom.c | 17 +++++++++++++++-- - 1 file changed, 15 insertions(+), 2 deletions(-) - ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -69,7 +69,20 @@ - #define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c - #define CFG_BRIDGE_SB_INIT BIT(0) - --#define PCIE_CAP_LINK1_VAL 0x2FD7F -+#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, \ -+ 250) -+#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, \ -+ 1) -+#define PCIE_CAP_SLOT_VAL (PCI_EXP_SLTCAP_ABP | \ -+ PCI_EXP_SLTCAP_PCP | \ -+ PCI_EXP_SLTCAP_MRLSP | \ -+ PCI_EXP_SLTCAP_AIP | \ -+ PCI_EXP_SLTCAP_PIP | \ -+ PCI_EXP_SLTCAP_HPS | \ -+ PCI_EXP_SLTCAP_HPC | \ -+ PCI_EXP_SLTCAP_EIP | \ -+ PCIE_CAP_SLOT_POWER_LIMIT_VAL | \ -+ PCIE_CAP_SLOT_POWER_LIMIT_SCALE) - - #define PCIE20_PARF_Q2A_FLUSH 0x1AC - -@@ -1125,7 +1138,7 @@ static int qcom_pcie_post_init_2_3_3(str - - writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND); - writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG); -- writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); -+ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); - - val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); - val &= ~PCI_EXP_LNKCAP_ASPMS; diff --git a/target/linux/ipq807x/patches-6.1/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch b/target/linux/ipq807x/patches-6.1/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch deleted file mode 100644 index b29512fb76f5..000000000000 --- a/target/linux/ipq807x/patches-6.1/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 180ce25d5c3ccff206f084b7ab350778641d1b1c Mon Sep 17 00:00:00 2001 -From: Prasad Malisetty -Date: Thu, 7 Oct 2021 23:18:42 +0530 -Subject: [PATCH] PCI: qcom: Replace ops with struct pcie_cfg in pcie match - data - -Add struct qcom_pcie_cfg as match data for all platforms. Assign -appropriate platform ops into struct qcom_pcie_cfg and read using -of_device_get_match_data() in qcom_pcie_probe(). - -Link: https://lore.kernel.org/r/1633628923-25047-5-git-send-email-pmaliset@codeaurora.org -Signed-off-by: Prasad Malisetty -Signed-off-by: Lorenzo Pieralisi -Signed-off-by: Bjorn Helgaas -Reviewed-by: Stephen Boyd ---- - drivers/pci/controller/dwc/pcie-qcom.c | 66 +++++++++++++++++++++----- - 1 file changed, 55 insertions(+), 11 deletions(-) - ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -202,6 +202,10 @@ struct qcom_pcie_ops { - int (*config_sid)(struct qcom_pcie *pcie); - }; - -+struct qcom_pcie_cfg { -+ const struct qcom_pcie_ops *ops; -+}; -+ - struct qcom_pcie { - struct dw_pcie *pci; - void __iomem *parf; /* DT parf */ -@@ -1467,6 +1471,38 @@ static const struct qcom_pcie_ops ops_1_ - .config_sid = qcom_pcie_config_sid_sm8250, - }; - -+static const struct qcom_pcie_cfg apq8084_cfg = { -+ .ops = &ops_1_0_0, -+}; -+ -+static const struct qcom_pcie_cfg ipq8064_cfg = { -+ .ops = &ops_2_1_0, -+}; -+ -+static const struct qcom_pcie_cfg msm8996_cfg = { -+ .ops = &ops_2_3_2, -+}; -+ -+static const struct qcom_pcie_cfg ipq8074_cfg = { -+ .ops = &ops_2_3_3, -+}; -+ -+static const struct qcom_pcie_cfg ipq4019_cfg = { -+ .ops = &ops_2_4_0, -+}; -+ -+static const struct qcom_pcie_cfg sdm845_cfg = { -+ .ops = &ops_2_7_0, -+}; -+ -+static const struct qcom_pcie_cfg sm8250_cfg = { -+ .ops = &ops_1_9_0, -+}; -+ -+static const struct qcom_pcie_cfg sc7280_cfg = { -+ .ops = &ops_1_9_0, -+}; -+ - static const struct dw_pcie_ops dw_pcie_ops = { - .link_up = qcom_pcie_link_up, - .start_link = qcom_pcie_start_link, -@@ -1478,6 +1514,7 @@ static int qcom_pcie_probe(struct platfo - struct pcie_port *pp; - struct dw_pcie *pci; - struct qcom_pcie *pcie; -+ const struct qcom_pcie_cfg *pcie_cfg; - int ret; - - pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); -@@ -1499,7 +1536,13 @@ static int qcom_pcie_probe(struct platfo - - pcie->pci = pci; - -- pcie->ops = of_device_get_match_data(dev); -+ pcie_cfg = of_device_get_match_data(dev); -+ if (!pcie_cfg || !pcie_cfg->ops) { -+ dev_err(dev, "Invalid platform data\n"); -+ return -EINVAL; -+ } -+ -+ pcie->ops = pcie_cfg->ops; - - pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); - if (IS_ERR(pcie->reset)) { -@@ -1555,16 +1598,17 @@ err_pm_runtime_put: - } - - static const struct of_device_id qcom_pcie_match[] = { -- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, -- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, -- { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, -- { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, -- { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, -- { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, -- { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, -- { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, -- { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, -- { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, -+ { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, -+ { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, -+ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, -+ { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, -+ { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, -+ { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, -+ { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, -+ { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, -+ { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, -+ { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, -+ { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, - { } - }; - diff --git a/target/linux/ipq807x/patches-6.1/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch b/target/linux/ipq807x/patches-6.1/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch deleted file mode 100644 index af8ba2a4e13d..000000000000 --- a/target/linux/ipq807x/patches-6.1/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch +++ /dev/null @@ -1,220 +0,0 @@ -From a7d96ca20847ade9f29cff4521f43b8ae968b3df Mon Sep 17 00:00:00 2001 -From: Selvam Sathappan Periakaruppan -Date: Tue, 21 Jun 2022 11:54:54 +0300 -Subject: [PATCH] PCI: qcom: Add IPQ60xx support - -IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that -platform. - -The code is based on downstream[1] Codeaurora kernel v5.4 (branch -win.linuxopenwrt.2.0). - -Split out the DBI registers access part from .init into .post_init. DBI -registers are only accessible after phy_power_on(). - -[1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ - -Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il -Tested-by: Robert Marko -Signed-off-by: Selvam Sathappan Periakaruppan -Signed-off-by: Baruch Siach -Signed-off-by: Bjorn Helgaas -Reviewed-by: Rob Herring -Reviewed-by: Johan Hovold -Acked-by: Stanimir Varbanov ---- - drivers/pci/controller/dwc/pcie-designware.h | 1 + - drivers/pci/controller/dwc/pcie-qcom.c | 130 +++++++++++++++++++ - 2 files changed, 131 insertions(+) - ---- a/drivers/pci/controller/dwc/pcie-designware.h -+++ b/drivers/pci/controller/dwc/pcie-designware.h -@@ -76,6 +76,7 @@ - - #define GEN3_RELATED_OFF 0x890 - #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) -+#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13) - #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) - #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 - #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -52,6 +52,10 @@ - #define PCIE20_PARF_DBI_BASE_ADDR 0x168 - #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C - #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 -+#define AHB_CLK_EN BIT(0) -+#define MSTR_AXI_CLK_EN BIT(1) -+#define BYPASS BIT(4) -+ - #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 - #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 - #define PCIE20_PARF_LTSSM 0x1B0 -@@ -181,6 +185,11 @@ struct qcom_pcie_resources_2_7_0 { - struct clk *pipe_clk; - }; - -+struct qcom_pcie_resources_2_9_0 { -+ struct clk_bulk_data clks[5]; -+ struct reset_control *rst; -+}; -+ - union qcom_pcie_resources { - struct qcom_pcie_resources_1_0_0 v1_0_0; - struct qcom_pcie_resources_2_1_0 v2_1_0; -@@ -188,6 +197,7 @@ union qcom_pcie_resources { - struct qcom_pcie_resources_2_3_3 v2_3_3; - struct qcom_pcie_resources_2_4_0 v2_4_0; - struct qcom_pcie_resources_2_7_0 v2_7_0; -+ struct qcom_pcie_resources_2_9_0 v2_9_0; - }; - - struct qcom_pcie; -@@ -1280,6 +1290,112 @@ static void qcom_pcie_post_deinit_2_7_0( - clk_disable_unprepare(res->pipe_clk); - } - -+static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) -+{ -+ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; -+ struct dw_pcie *pci = pcie->pci; -+ struct device *dev = pci->dev; -+ int ret; -+ -+ res->clks[0].id = "iface"; -+ res->clks[1].id = "axi_m"; -+ res->clks[2].id = "axi_s"; -+ res->clks[3].id = "axi_bridge"; -+ res->clks[4].id = "rchng"; -+ -+ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); -+ if (ret < 0) -+ return ret; -+ -+ res->rst = devm_reset_control_array_get_exclusive(dev); -+ if (IS_ERR(res->rst)) -+ return PTR_ERR(res->rst); -+ -+ return 0; -+} -+ -+static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) -+{ -+ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; -+ -+ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); -+} -+ -+static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) -+{ -+ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; -+ struct device *dev = pcie->pci->dev; -+ int ret; -+ -+ ret = reset_control_assert(res->rst); -+ if (ret) { -+ dev_err(dev, "reset assert failed (%d)\n", ret); -+ return ret; -+ } -+ -+ /* -+ * Delay periods before and after reset deassert are working values -+ * from downstream Codeaurora kernel -+ */ -+ usleep_range(2000, 2500); -+ -+ ret = reset_control_deassert(res->rst); -+ if (ret) { -+ dev_err(dev, "reset deassert failed (%d)\n", ret); -+ return ret; -+ } -+ -+ usleep_range(2000, 2500); -+ -+ return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); -+} -+ -+static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) -+{ -+ struct dw_pcie *pci = pcie->pci; -+ u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); -+ u32 val; -+ int i; -+ -+ writel(SLV_ADDR_SPACE_SZ, -+ pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); -+ -+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); -+ val &= ~BIT(0); -+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); -+ -+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); -+ -+ writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); -+ writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, -+ pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); -+ writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS | -+ GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, -+ pci->dbi_base + GEN3_RELATED_OFF); -+ -+ writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS | -+ SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | -+ AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, -+ pcie->parf + PCIE20_PARF_SYS_CTRL); -+ -+ writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); -+ -+ dw_pcie_dbi_ro_wr_en(pci); -+ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); -+ -+ val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); -+ val &= ~PCI_EXP_LNKCAP_ASPMS; -+ writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); -+ -+ writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + -+ PCI_EXP_DEVCTL2); -+ -+ for (i = 0; i < 256; i++) -+ writel(0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + (4 * i)); -+ -+ return 0; -+} -+ - static int qcom_pcie_link_up(struct dw_pcie *pci) - { - u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); -@@ -1471,6 +1587,15 @@ static const struct qcom_pcie_ops ops_1_ - .config_sid = qcom_pcie_config_sid_sm8250, - }; - -+/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ -+static const struct qcom_pcie_ops ops_2_9_0 = { -+ .get_resources = qcom_pcie_get_resources_2_9_0, -+ .init = qcom_pcie_init_2_9_0, -+ .post_init = qcom_pcie_post_init_2_9_0, -+ .deinit = qcom_pcie_deinit_2_9_0, -+ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, -+}; -+ - static const struct qcom_pcie_cfg apq8084_cfg = { - .ops = &ops_1_0_0, - }; -@@ -1503,6 +1628,10 @@ static const struct qcom_pcie_cfg sc7280 - .ops = &ops_1_9_0, - }; - -+static const struct qcom_pcie_cfg ipq6018_cfg = { -+ .ops = &ops_2_9_0, -+}; -+ - static const struct dw_pcie_ops dw_pcie_ops = { - .link_up = qcom_pcie_link_up, - .start_link = qcom_pcie_start_link, -@@ -1609,6 +1738,7 @@ static const struct of_device_id qcom_pc - { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, - { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, - { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, -+ { .compatible = "qcom,pcie-ipq6018", .data = &ipq6018_cfg }, - { } - }; - diff --git a/target/linux/ipq807x/patches-6.1/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch b/target/linux/ipq807x/patches-6.1/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch deleted file mode 100644 index 5300c36dce70..000000000000 --- a/target/linux/ipq807x/patches-6.1/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch +++ /dev/null @@ -1,288 +0,0 @@ -From e8e7ce92a49dc87f0d006cfbfe419b8e0b25476d Mon Sep 17 00:00:00 2001 -From: Bjorn Andersson -Date: Tue, 26 Apr 2022 14:21:36 -0700 -Subject: [PATCH] clk: qcom: rcg2: Cache CFG register updates for parked RCGs - -As GDSCs are turned on and off some associated clocks are momentarily -enabled for house keeping purposes. For this, and similar, purposes the -"shared RCGs" will park the RCG on a source clock which is known to be -available. -When the RCG is parked, a safe clock source will be selected and -committed, then the original source would be written back and upon enable -the change back to the unparked source would be committed. - -But starting with SM8350 this fails, as the value in CFG is committed by -the GDSC handshake and without a ticking parent the GDSC enablement will -time out. - -This becomes a concrete problem if the runtime supended state of a -device includes disabling such rcg's parent clock. As the device -attempts to power up the domain again the rcg will fail to enable and -hence the GDSC enablement will fail, preventing the device from -returning from the suspended state. - -This can be seen in e.g. the display stack during probe on SM8350. - -To avoid this problem, the software needs to ensure that the RCG is -configured to a active parent clock while it is disabled. This is done -by caching the CFG register content while the shared RCG is parked on -this safe source. - -Writes to M, N and D registers are committed as they are requested. New -helpers for get_parent() and recalc_rate() are extracted from their -previous implementations and __clk_rcg2_configure() is modified to allow -it to operate on the cached value. - -Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed") -Signed-off-by: Bjorn Andersson -Reviewed-by: Stephen Boyd -Link: https://lore.kernel.org/r/20220426212136.1543984-1-bjorn.andersson@linaro.org ---- - drivers/clk/qcom/clk-rcg.h | 2 + - drivers/clk/qcom/clk-rcg2.c | 126 ++++++++++++++++++++++++++++-------- - 2 files changed, 101 insertions(+), 27 deletions(-) - ---- a/drivers/clk/qcom/clk-rcg.h -+++ b/drivers/clk/qcom/clk-rcg.h -@@ -139,6 +139,7 @@ extern const struct clk_ops clk_dyn_rcg_ - * @freq_tbl: frequency table - * @clkr: regmap clock handle - * @cfg_off: defines the cfg register offset from the CMD_RCGR + CFG_REG -+ * @parked_cfg: cached value of the CFG register for parked RCGs - */ - struct clk_rcg2 { - u32 cmd_rcgr; -@@ -149,6 +150,7 @@ struct clk_rcg2 { - const struct freq_tbl *freq_tbl; - struct clk_regmap clkr; - u8 cfg_off; -+ u32 parked_cfg; - }; - - #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr) ---- a/drivers/clk/qcom/clk-rcg2.c -+++ b/drivers/clk/qcom/clk-rcg2.c -@@ -74,16 +74,11 @@ static int clk_rcg2_is_enabled(struct cl - return (cmd & CMD_ROOT_OFF) == 0; - } - --static u8 clk_rcg2_get_parent(struct clk_hw *hw) -+static u8 __clk_rcg2_get_parent(struct clk_hw *hw, u32 cfg) - { - struct clk_rcg2 *rcg = to_clk_rcg2(hw); - int num_parents = clk_hw_get_num_parents(hw); -- u32 cfg; -- int i, ret; -- -- ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); -- if (ret) -- goto err; -+ int i; - - cfg &= CFG_SRC_SEL_MASK; - cfg >>= CFG_SRC_SEL_SHIFT; -@@ -92,12 +87,27 @@ static u8 clk_rcg2_get_parent(struct clk - if (cfg == rcg->parent_map[i].cfg) - return i; - --err: - pr_debug("%s: Clock %s has invalid parent, using default.\n", - __func__, clk_hw_get_name(hw)); - return 0; - } - -+static u8 clk_rcg2_get_parent(struct clk_hw *hw) -+{ -+ struct clk_rcg2 *rcg = to_clk_rcg2(hw); -+ u32 cfg; -+ int ret; -+ -+ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); -+ if (ret) { -+ pr_debug("%s: Unable to read CFG register for %s\n", -+ __func__, clk_hw_get_name(hw)); -+ return 0; -+ } -+ -+ return __clk_rcg2_get_parent(hw, cfg); -+} -+ - static int update_config(struct clk_rcg2 *rcg) - { - int count, ret; -@@ -164,12 +174,10 @@ calc_rate(unsigned long rate, u32 m, u32 - } - - static unsigned long --clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -+__clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, u32 cfg) - { - struct clk_rcg2 *rcg = to_clk_rcg2(hw); -- u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask; -- -- regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); -+ u32 hid_div, m = 0, n = 0, mode = 0, mask; - - if (rcg->mnd_width) { - mask = BIT(rcg->mnd_width) - 1; -@@ -190,6 +198,17 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, - return calc_rate(parent_rate, m, n, mode, hid_div); - } - -+static unsigned long -+clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -+{ -+ struct clk_rcg2 *rcg = to_clk_rcg2(hw); -+ u32 cfg; -+ -+ regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); -+ -+ return __clk_rcg2_recalc_rate(hw, parent_rate, cfg); -+} -+ - static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, - struct clk_rate_request *req, - enum freq_policy policy) -@@ -263,7 +282,8 @@ static int clk_rcg2_determine_floor_rate - return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, FLOOR); - } - --static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) -+static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f, -+ u32 *_cfg) - { - u32 cfg, mask, d_val, not2d_val, n_minus_m; - struct clk_hw *hw = &rcg->clkr.hw; -@@ -305,15 +325,27 @@ static int __clk_rcg2_configure(struct c - cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; - if (rcg->mnd_width && f->n && (f->m != f->n)) - cfg |= CFG_MODE_DUAL_EDGE; -- return regmap_update_bits(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), -- mask, cfg); -+ -+ *_cfg &= ~mask; -+ *_cfg |= cfg; -+ -+ return 0; - } - - static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) - { -+ u32 cfg; - int ret; - -- ret = __clk_rcg2_configure(rcg, f); -+ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); -+ if (ret) -+ return ret; -+ -+ ret = __clk_rcg2_configure(rcg, f, &cfg); -+ if (ret) -+ return ret; -+ -+ ret = regmap_write(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), cfg); - if (ret) - return ret; - -@@ -994,11 +1026,12 @@ static int clk_rcg2_shared_set_rate(stru - return -EINVAL; - - /* -- * In case clock is disabled, update the CFG, M, N and D registers -- * and don't hit the update bit of CMD register. -+ * In case clock is disabled, update the M, N and D registers, cache -+ * the CFG value in parked_cfg and don't hit the update bit of CMD -+ * register. - */ -- if (!__clk_is_enabled(hw->clk)) -- return __clk_rcg2_configure(rcg, f); -+ if (!clk_hw_is_enabled(hw)) -+ return __clk_rcg2_configure(rcg, f, &rcg->parked_cfg); - - return clk_rcg2_shared_force_enable_clear(hw, f); - } -@@ -1022,6 +1055,11 @@ static int clk_rcg2_shared_enable(struct - if (ret) - return ret; - -+ /* Write back the stored configuration corresponding to current rate */ -+ ret = regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, rcg->parked_cfg); -+ if (ret) -+ return ret; -+ - ret = update_config(rcg); - if (ret) - return ret; -@@ -1032,13 +1070,12 @@ static int clk_rcg2_shared_enable(struct - static void clk_rcg2_shared_disable(struct clk_hw *hw) - { - struct clk_rcg2 *rcg = to_clk_rcg2(hw); -- u32 cfg; - - /* - * Store current configuration as switching to safe source would clear - * the SRC and DIV of CFG register - */ -- regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg); -+ regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &rcg->parked_cfg); - - /* - * Park the RCG at a safe configuration - sourced off of safe source. -@@ -1056,17 +1093,52 @@ static void clk_rcg2_shared_disable(stru - update_config(rcg); - - clk_rcg2_clear_force_enable(hw); -+} - -- /* Write back the stored configuration corresponding to current rate */ -- regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg); -+static u8 clk_rcg2_shared_get_parent(struct clk_hw *hw) -+{ -+ struct clk_rcg2 *rcg = to_clk_rcg2(hw); -+ -+ /* If the shared rcg is parked use the cached cfg instead */ -+ if (!clk_hw_is_enabled(hw)) -+ return __clk_rcg2_get_parent(hw, rcg->parked_cfg); -+ -+ return clk_rcg2_get_parent(hw); -+} -+ -+static int clk_rcg2_shared_set_parent(struct clk_hw *hw, u8 index) -+{ -+ struct clk_rcg2 *rcg = to_clk_rcg2(hw); -+ -+ /* If the shared rcg is parked only update the cached cfg */ -+ if (!clk_hw_is_enabled(hw)) { -+ rcg->parked_cfg &= ~CFG_SRC_SEL_MASK; -+ rcg->parked_cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; -+ -+ return 0; -+ } -+ -+ return clk_rcg2_set_parent(hw, index); -+} -+ -+static unsigned long -+clk_rcg2_shared_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -+{ -+ struct clk_rcg2 *rcg = to_clk_rcg2(hw); -+ -+ /* If the shared rcg is parked use the cached cfg instead */ -+ if (!clk_hw_is_enabled(hw)) -+ return __clk_rcg2_recalc_rate(hw, parent_rate, rcg->parked_cfg); -+ -+ return clk_rcg2_recalc_rate(hw, parent_rate); - } - - const struct clk_ops clk_rcg2_shared_ops = { - .enable = clk_rcg2_shared_enable, - .disable = clk_rcg2_shared_disable, -- .get_parent = clk_rcg2_get_parent, -- .set_parent = clk_rcg2_set_parent, -- .recalc_rate = clk_rcg2_recalc_rate, -+ .get_parent = clk_rcg2_shared_get_parent, -+ .set_parent = clk_rcg2_shared_set_parent, -+ .recalc_rate = clk_rcg2_shared_recalc_rate, - .determine_rate = clk_rcg2_determine_rate, - .set_rate = clk_rcg2_shared_set_rate, - .set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent, -- 2.30.2