From 805c5f93286f2e5b5ab53fb23501768b47314aea Mon Sep 17 00:00:00 2001 From: Ravishankar Karkala Mallikarjunayya Date: Wed, 8 Jun 2016 15:18:54 +0530 Subject: [PATCH] Staging: comedi: s626: fix comment issue This fixes up a WARNING: 'Block comments use a trailing */ on a separate line'found by the checkpatch.pl tool. Signed-off-by: Ravishankar Karkala Mallikarjunayya Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/s626.h | 356 +++++++++++++++++--------- 1 file changed, 237 insertions(+), 119 deletions(-) diff --git a/drivers/staging/comedi/drivers/s626.h b/drivers/staging/comedi/drivers/s626.h index b83424e7507b..6a00a64c6f3a 100644 --- a/drivers/staging/comedi/drivers/s626.h +++ b/drivers/staging/comedi/drivers/s626.h @@ -29,8 +29,10 @@ #define S626_ENCODER_CHANNELS 6 #define S626_DIO_CHANNELS 48 #define S626_DIO_BANKS 3 /* Number of DIO groups. */ -#define S626_DIO_EXTCHANS 40 /* Number of extended-capability - * DIO channels. */ +#define S626_DIO_EXTCHANS 40 /* + * Number of extended-capability + * DIO channels. + */ #define S626_NUM_TRIMDACS 12 /* Number of valid TrimDAC channels. */ @@ -48,21 +50,29 @@ #define S626_GSEL_BIPOLAR10V 0x00A0 /* S626_LP_GSEL setting 10V bipolar. */ /* Error codes that must be visible to this base class. */ -#define S626_ERR_ILLEGAL_PARM 0x00010000 /* Illegal function parameter - * value was specified. */ +#define S626_ERR_ILLEGAL_PARM 0x00010000 /* + * Illegal function parameter + * value was specified. + */ #define S626_ERR_I2C 0x00020000 /* I2C error. */ -#define S626_ERR_COUNTERSETUP 0x00200000 /* Illegal setup specified for - * counter channel. */ +#define S626_ERR_COUNTERSETUP 0x00200000 /* + * Illegal setup specified for + * counter channel. + */ #define S626_ERR_DEBI_TIMEOUT 0x00400000 /* DEBI transfer timed out. */ /* * Organization (physical order) and size (in DWORDs) of logical DMA buffers * contained by ANA_DMABUF. */ -#define S626_ADC_DMABUF_DWORDS 40 /* ADC DMA buffer must hold 16 samples, - * plus pre/post garbage samples. */ -#define S626_DAC_WDMABUF_DWORDS 1 /* DAC output DMA buffer holds a single - * sample. */ +#define S626_ADC_DMABUF_DWORDS 40 /* + * ADC DMA buffer must hold 16 samples, + * plus pre/post garbage samples. + */ +#define S626_DAC_WDMABUF_DWORDS 1 /* + * DAC output DMA buffer holds a single + * sample. + */ /* All remaining space in 4KB DMA buffer is available for the RPS1 program. */ @@ -95,60 +105,90 @@ #define S626_RPS_IRQ 0x60000000 /* IRQ */ #define S626_RPS_LOGICAL_OR 0x08000000 /* Logical OR conditionals. */ -#define S626_RPS_INVERT 0x04000000 /* Test for negated - * semaphores. */ +#define S626_RPS_INVERT 0x04000000 /* + * Test for negated + * semaphores. + */ #define S626_RPS_DEBI 0x00000002 /* DEBI done */ -#define S626_RPS_SIG0 0x00200000 /* RPS semaphore 0 - * (used by ADC). */ -#define S626_RPS_SIG1 0x00400000 /* RPS semaphore 1 - * (used by DAC). */ -#define S626_RPS_SIG2 0x00800000 /* RPS semaphore 2 - * (not used). */ +#define S626_RPS_SIG0 0x00200000 /* + * RPS semaphore 0 + * (used by ADC). + */ +#define S626_RPS_SIG1 0x00400000 /* + * RPS semaphore 1 + * (used by DAC). + */ +#define S626_RPS_SIG2 0x00800000 /* + * RPS semaphore 2 + * (not used). + */ #define S626_RPS_GPIO2 0x00080000 /* RPS GPIO2 */ #define S626_RPS_GPIO3 0x00100000 /* RPS GPIO3 */ -#define S626_RPS_SIGADC S626_RPS_SIG0 /* Trigger/status for - * ADC's RPS program. */ -#define S626_RPS_SIGDAC S626_RPS_SIG1 /* Trigger/status for - * DAC's RPS program. */ +#define S626_RPS_SIGADC S626_RPS_SIG0 /* + * Trigger/status for + * ADC's RPS program. + */ +#define S626_RPS_SIGDAC S626_RPS_SIG1 /* + * Trigger/status for + * DAC's RPS program. + */ /* RPS clock parameters. */ -#define S626_RPSCLK_SCALAR 8 /* This is apparent ratio of - * PCI/RPS clks (undocumented!!). */ +#define S626_RPSCLK_SCALAR 8 /* + * This is apparent ratio of + * PCI/RPS clks (undocumented!!). + */ #define S626_RPSCLK_PER_US (33 / S626_RPSCLK_SCALAR) - /* Number of RPS clocks in one - * microsecond. */ + /* + * Number of RPS clocks in one + * microsecond. + */ /* Event counter source addresses. */ #define S626_SBA_RPS_A0 0x27 /* Time of RPS0 busy, in PCI clocks. */ /* GPIO constants. */ -#define S626_GPIO_BASE 0x10004000 /* GPIO 0,2,3 = inputs, - * GPIO3 = IRQ; GPIO1 = out. */ +#define S626_GPIO_BASE 0x10004000 /* + * GPIO 0,2,3 = inputs, + * GPIO3 = IRQ; GPIO1 = out. + */ #define S626_GPIO1_LO 0x00000000 /* GPIO1 set to LOW. */ #define S626_GPIO1_HI 0x00001000 /* GPIO1 set to HIGH. */ /* Primary Status Register (PSR) constants. */ #define S626_PSR_DEBI_E 0x00040000 /* DEBI event flag. */ #define S626_PSR_DEBI_S 0x00080000 /* DEBI status flag. */ -#define S626_PSR_A2_IN 0x00008000 /* Audio output DMA2 protection - * address reached. */ -#define S626_PSR_AFOU 0x00000800 /* Audio FIFO under/overflow - * detected. */ -#define S626_PSR_GPIO2 0x00000020 /* GPIO2 input pin: 0=AdcBusy, - * 1=AdcIdle. */ -#define S626_PSR_EC0S 0x00000001 /* Event counter 0 threshold - * reached. */ +#define S626_PSR_A2_IN 0x00008000 /* + * Audio output DMA2 protection + * address reached. + */ +#define S626_PSR_AFOU 0x00000800 /* + * Audio FIFO under/overflow + * detected. + */ +#define S626_PSR_GPIO2 0x00000020 /* + * GPIO2 input pin: 0=AdcBusy, + * 1=AdcIdle. + */ +#define S626_PSR_EC0S 0x00000001 /* + * Event counter 0 threshold + * reached. + */ /* Secondary Status Register (SSR) constants. */ -#define S626_SSR_AF2_OUT 0x00000200 /* Audio 2 output FIFO - * under/overflow detected. */ +#define S626_SSR_AF2_OUT 0x00000200 /* + * Audio 2 output FIFO + * under/overflow detected. + */ /* Master Control Register 1 (MC1) constants. */ #define S626_MC1_SOFT_RESET 0x80000000 /* Invoke 7146 soft reset. */ -#define S626_MC1_SHUTDOWN 0x3FFF0000 /* Shut down all MC1-controlled - * enables. */ +#define S626_MC1_SHUTDOWN 0x3FFF0000 /* + * Shut down all MC1-controlled + * enables. + */ #define S626_MC1_ERPS1 0x2000 /* Enab/disable RPS task 1. */ #define S626_MC1_ERPS0 0x1000 /* Enab/disable RPS task 0. */ @@ -177,15 +217,23 @@ #define S626_P_DEBIAD 0x0088 /* DEBI target address. */ #define S626_P_I2CCTRL 0x008C /* I2C control. */ #define S626_P_I2CSTAT 0x0090 /* I2C status. */ -#define S626_P_BASEA2_IN 0x00AC /* Audio input 2 base physical DMAbuf - * address. */ -#define S626_P_PROTA2_IN 0x00B0 /* Audio input 2 physical DMAbuf - * protection address. */ +#define S626_P_BASEA2_IN 0x00AC /* + * Audio input 2 base physical DMAbuf + * address. + */ +#define S626_P_PROTA2_IN 0x00B0 /* + * Audio input 2 physical DMAbuf + * protection address. + */ #define S626_P_PAGEA2_IN 0x00B4 /* Audio input 2 paging attributes. */ -#define S626_P_BASEA2_OUT 0x00B8 /* Audio output 2 base physical DMAbuf - * address. */ -#define S626_P_PROTA2_OUT 0x00BC /* Audio output 2 physical DMAbuf - * protection address. */ +#define S626_P_BASEA2_OUT 0x00B8 /* + * Audio output 2 base physical DMAbuf + * address. + */ +#define S626_P_PROTA2_OUT 0x00BC /* + * Audio output 2 physical DMAbuf + * protection address. + */ #define S626_P_PAGEA2_OUT 0x00C0 /* Audio output 2 paging attributes. */ #define S626_P_RPSPAGE0 0x00C4 /* RPS0 page. */ #define S626_P_RPSPAGE1 0x00C8 /* RPS1 page. */ @@ -205,8 +253,10 @@ #define S626_P_PSR 0x0110 /* Primary status. */ #define S626_P_SSR 0x0114 /* Secondary status. */ #define S626_P_EC1R 0x0118 /* Event counter set 1. */ -#define S626_P_ADP4 0x0138 /* Logical audio DMA pointer of audio - * input FIFO A2_IN. */ +#define S626_P_ADP4 0x0138 /* + * Logical audio DMA pointer of audio + * input FIFO A2_IN. + */ #define S626_P_FB_BUFFER1 0x0144 /* Audio feedback buffer 1. */ #define S626_P_FB_BUFFER2 0x0148 /* Audio feedback buffer 2. */ #define S626_P_TSL1 0x0180 /* Audio time slot list 1. */ @@ -243,13 +293,19 @@ #define S626_LP_RDMISC2 0x0082 /* Read Misc2. */ /* Bit masks for MISC1 register that are the same for reads and writes. */ -#define S626_MISC1_WENABLE 0x8000 /* enab writes to MISC2 (except Clear - * Watchdog bit). */ +#define S626_MISC1_WENABLE 0x8000 /* + * enab writes to MISC2 (except Clear + * Watchdog bit). + */ #define S626_MISC1_WDISABLE 0x0000 /* Disable writes to MISC2. */ -#define S626_MISC1_EDCAP 0x1000 /* Enable edge capture on DIO chans - * specified by S626_LP_WRCAPSELx. */ -#define S626_MISC1_NOEDCAP 0x0000 /* Disable edge capture on specified - * DIO chans. */ +#define S626_MISC1_EDCAP 0x1000 /* + * Enable edge capture on DIO chans + * specified by S626_LP_WRCAPSELx. + */ +#define S626_MISC1_NOEDCAP 0x0000 /* + * Disable edge capture on specified + * DIO chans. + */ /* Bit masks for MISC1 register reads. */ #define S626_RDMISC1_WDTIMEOUT 0x4000 /* Watchdog timer timed out. */ @@ -268,35 +324,49 @@ #define S626_A1_RUN 0x20000000 /* Run A1 based on TSL1. */ #define S626_A1_SWAP 0x00200000 /* Use big-endian for A1. */ #define S626_A2_SWAP 0x00100000 /* Use big-endian for A2. */ -#define S626_WS_MODES 0x00019999 /* WS0 = TSL1 trigger input, - * WS1-WS4 = CS* outputs. */ - -#if S626_PLATFORM == S626_INTEL /* Base ACON1 config: always run - * A1 based on TSL1. */ +#define S626_WS_MODES 0x00019999 /* + * WS0 = TSL1 trigger input, + * WS1-WS4 = CS* outputs. + */ + +#if S626_PLATFORM == S626_INTEL /* + * Base ACON1 config: always run + * A1 based on TSL1. + */ #define S626_ACON1_BASE (S626_WS_MODES | S626_A1_RUN) #elif S626_PLATFORM == S626_MOTOROLA #define S626_ACON1_BASE \ (S626_WS_MODES | S626_A1_RUN | S626_A1_SWAP | S626_A2_SWAP) #endif -#define S626_ACON1_ADCSTART S626_ACON1_BASE /* Start ADC: run A1 - * based on TSL1. */ +#define S626_ACON1_ADCSTART S626_ACON1_BASE /* + * Start ADC: run A1 + * based on TSL1. + */ #define S626_ACON1_DACSTART (S626_ACON1_BASE | S626_A2_RUN) /* Start transmit to DAC: run A2 based on TSL2. */ #define S626_ACON1_DACSTOP S626_ACON1_BASE /* Halt A2. */ /* Bit masks for ACON2 register. */ #define S626_A1_CLKSRC_BCLK1 0x00000000 /* A1 bit rate = BCLK1 (ADC). */ -#define S626_A2_CLKSRC_X1 0x00800000 /* A2 bit rate = ACLK/1 - * (DACs). */ -#define S626_A2_CLKSRC_X2 0x00C00000 /* A2 bit rate = ACLK/2 - * (DACs). */ -#define S626_A2_CLKSRC_X4 0x01400000 /* A2 bit rate = ACLK/4 - * (DACs). */ +#define S626_A2_CLKSRC_X1 0x00800000 /* + * A2 bit rate = ACLK/1 + * (DACs). + */ +#define S626_A2_CLKSRC_X2 0x00C00000 /* + * A2 bit rate = ACLK/2 + * (DACs). + */ +#define S626_A2_CLKSRC_X4 0x01400000 /* + * A2 bit rate = ACLK/4 + * (DACs). + */ #define S626_INVERT_BCLK2 0x00100000 /* Invert BCLK2 (DACs). */ #define S626_BCLK2_OE 0x00040000 /* Enable BCLK2 (DACs). */ -#define S626_ACON2_XORMASK 0x000C0000 /* XOR mask for ACON2 - * active-low bits. */ +#define S626_ACON2_XORMASK 0x000C0000 /* + * XOR mask for ACON2 + * active-low bits. + */ #define S626_ACON2_INIT (S626_ACON2_XORMASK ^ \ (S626_A1_CLKSRC_BCLK1 | S626_A2_CLKSRC_X2 | \ @@ -308,12 +378,18 @@ #define S626_WS3 0x10000000 #define S626_WS4 0x08000000 #define S626_RSD1 0x01000000 /* Shift A1 data in on SD1. */ -#define S626_SDW_A1 0x00800000 /* Store rcv'd char at next char - * slot of DWORD1 buffer. */ -#define S626_SIB_A1 0x00400000 /* Store rcv'd char at next - * char slot of FB1 buffer. */ -#define S626_SF_A1 0x00200000 /* Write unsigned long - * buffer to input FIFO. */ +#define S626_SDW_A1 0x00800000 /* + * Store rcv'd char at next char + * slot of DWORD1 buffer. + */ +#define S626_SIB_A1 0x00400000 /* + * Store rcv'd char at next + * char slot of FB1 buffer. + */ +#define S626_SF_A1 0x00200000 /* + * Write unsigned long + * buffer to input FIFO. + */ /* Select parallel-to-serial converter's data source: */ #define S626_XFIFO_0 0x00000000 /* Data fifo byte 0. */ @@ -324,31 +400,45 @@ #define S626_XFB1 0x00000050 /* FB_BUFFER byte 1. */ #define S626_XFB2 0x00000060 /* FB_BUFFER byte 2. */ #define S626_XFB3 0x00000070 /* FB_BUFFER byte 3. */ -#define S626_SIB_A2 0x00000200 /* Store next dword from A2's +#define S626_SIB_A2 0x00000200 /* + * Store next dword from A2's * input shifter to FB2 - * buffer. */ -#define S626_SF_A2 0x00000100 /* Store next dword from A2's + * buffer. + */ +#define S626_SF_A2 0x00000100 /* + * Store next dword from A2's * input shifter to its input - * fifo. */ -#define S626_LF_A2 0x00000080 /* Load next dword from A2's + * fifo. + */ +#define S626_LF_A2 0x00000080 /* + * Load next dword from A2's * output fifo into its - * output dword buffer. */ + * output dword buffer. + */ #define S626_XSD2 0x00000008 /* Shift data out on SD2. */ #define S626_RSD3 0x00001800 /* Shift data in on SD3. */ #define S626_RSD2 0x00001000 /* Shift data in on SD2. */ -#define S626_LOW_A2 0x00000002 /* Drive last SD low for 7 clks, - * then tri-state. */ +#define S626_LOW_A2 0x00000002 /* + * Drive last SD low for 7 clks, + * then tri-state. + */ #define S626_EOS 0x00000001 /* End of superframe. */ /* I2C configuration constants. */ -#define S626_I2C_CLKSEL 0x0400 /* I2C bit rate = - * PCIclk/480 = 68.75 KHz. */ -#define S626_I2C_BITRATE 68.75 /* I2C bus data bit rate +#define S626_I2C_CLKSEL 0x0400 /* + * I2C bit rate = + * PCIclk/480 = 68.75 KHz. + */ +#define S626_I2C_BITRATE 68.75 /* + * I2C bus data bit rate * (determined by - * S626_I2C_CLKSEL) in KHz. */ -#define S626_I2C_WRTIME 15.0 /* Worst case time, in msec, + * S626_I2C_CLKSEL) in KHz. + */ +#define S626_I2C_WRTIME 15.0 /* + * Worst case time, in msec, * for EEPROM internal write - * op. */ + * op. + */ /* I2C manifest constants. */ @@ -368,8 +458,10 @@ #define S626_I2C_B0(ATTR, VAL) (((ATTR) << 2) | ((VAL) << 8)) /* DEBI command constants. */ -#define S626_DEBI_CMD_SIZE16 (2 << 17) /* Transfer size is always - * 2 bytes. */ +#define S626_DEBI_CMD_SIZE16 (2 << 17) /* + * Transfer size is always + * 2 bytes. + */ #define S626_DEBI_CMD_READ 0x00010000 /* Read operation. */ #define S626_DEBI_CMD_WRITE 0x00000000 /* Write operation. */ @@ -380,42 +472,58 @@ #define S626_DEBI_CMD_WRWORD (S626_DEBI_CMD_WRITE | S626_DEBI_CMD_SIZE16) /* DEBI configuration constants. */ -#define S626_DEBI_CFG_XIRQ_EN 0x80000000 /* Enable external interrupt - * on GPIO3. */ +#define S626_DEBI_CFG_XIRQ_EN 0x80000000 /* + * Enable external interrupt + * on GPIO3. + */ #define S626_DEBI_CFG_XRESUME 0x40000000 /* Resume block */ - /* Transfer when XIRQ - * deasserted. */ + /* + * Transfer when XIRQ + * deasserted. + */ #define S626_DEBI_CFG_TOQ 0x03C00000 /* Timeout (15 PCI cycles). */ #define S626_DEBI_CFG_FAST 0x10000000 /* Fast mode enable. */ /* 4-bit field that specifies DEBI timeout value in PCI clock cycles: */ -#define S626_DEBI_CFG_TOUT_BIT 22 /* Finish DEBI cycle after this many - * clocks. */ +#define S626_DEBI_CFG_TOUT_BIT 22 /* + * Finish DEBI cycle after this many + * clocks. + */ /* 2-bit field that specifies Endian byte lane steering: */ -#define S626_DEBI_CFG_SWAP_NONE 0x00000000 /* Straight - don't swap any - * bytes (Intel). */ +#define S626_DEBI_CFG_SWAP_NONE 0x00000000 /* + * Straight - don't swap any + * bytes (Intel). + */ #define S626_DEBI_CFG_SWAP_2 0x00100000 /* 2-byte swap (Motorola). */ #define S626_DEBI_CFG_SWAP_4 0x00200000 /* 4-byte swap. */ -#define S626_DEBI_CFG_SLAVE16 0x00080000 /* Slave is able to serve - * 16-bit cycles. */ -#define S626_DEBI_CFG_INC 0x00040000 /* Enable address increment - * for block transfers. */ +#define S626_DEBI_CFG_SLAVE16 0x00080000 /* + * Slave is able to serve + * 16-bit cycles. + */ +#define S626_DEBI_CFG_INC 0x00040000 /* + * Enable address increment + * for block transfers. + */ #define S626_DEBI_CFG_INTEL 0x00020000 /* Intel style local bus. */ #define S626_DEBI_CFG_TIMEROFF 0x00010000 /* Disable timer. */ #if S626_PLATFORM == S626_INTEL -#define S626_DEBI_TOUT 7 /* Wait 7 PCI clocks (212 ns) before - * polling RDY. */ +#define S626_DEBI_TOUT 7 /* + * Wait 7 PCI clocks (212 ns) before + * polling RDY. + */ /* Intel byte lane steering (pass through all byte lanes). */ #define S626_DEBI_SWAP S626_DEBI_CFG_SWAP_NONE #elif S626_PLATFORM == S626_MOTOROLA -#define S626_DEBI_TOUT 15 /* Wait 15 PCI clocks (454 ns) maximum - * before timing out. */ +#define S626_DEBI_TOUT 15 /* + * Wait 15 PCI clocks (454 ns) maximum + * before timing out. + */ /* Motorola byte lane steering. */ #define S626_DEBI_SWAP S626_DEBI_CFG_SWAP_2 @@ -429,10 +537,14 @@ /* LoadSrc values: */ #define S626_LOADSRC_INDX 0 /* Preload core in response to Index. */ -#define S626_LOADSRC_OVER 1 /* Preload core in response to - * Overflow. */ -#define S626_LOADSRCB_OVERA 2 /* Preload B core in response to - * A Overflow. */ +#define S626_LOADSRC_OVER 1 /* + * Preload core in response to + * Overflow. + */ +#define S626_LOADSRCB_OVERA 2 /* + * Preload B core in response to + * A Overflow. + */ #define S626_LOADSRC_NONE 3 /* Never preload core. */ /* IntSrc values: */ @@ -469,10 +581,14 @@ #define S626_CNTSRC_SYSCLK_DOWN 3 /* System clock down */ /* ClkPol values: */ -#define S626_CLKPOL_POS 0 /* Counter/Extender clock is - * active high. */ -#define S626_CLKPOL_NEG 1 /* Counter/Extender clock is - * active low. */ +#define S626_CLKPOL_POS 0 /* + * Counter/Extender clock is + * active high. + */ +#define S626_CLKPOL_NEG 1 /* + * Counter/Extender clock is + * active low. + */ #define S626_CNTDIR_UP 0 /* Timer counts up. */ #define S626_CNTDIR_DOWN 1 /* Timer counts down. */ @@ -488,8 +604,10 @@ /* Sanity-check limits for parameters. */ -#define S626_NUM_COUNTERS 6 /* Maximum valid counter - * logical channel number. */ +#define S626_NUM_COUNTERS 6 /* + * Maximum valid counter + * logical channel number. + */ #define S626_NUM_INTSOURCES 4 #define S626_NUM_LATCHSOURCES 4 #define S626_NUM_CLKMULTS 4 -- 2.30.2