From 7f927fcc2fd1575d01efb4b76665975007945690 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 28 Mar 2006 01:56:53 -0800 Subject: [PATCH] [PATCH] Typo fixes Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/m68k/README.buddha | 2 +- Documentation/networking/ifenslave.c | 2 +- arch/arm/lib/copy_template.S | 2 +- drivers/char/mxser.h | 2 +- drivers/char/synclink.c | 2 +- drivers/edac/edac_mc.c | 2 +- drivers/net/irda/nsc-ircc.c | 2 +- drivers/net/sis900.c | 2 +- drivers/net/tulip/de4x5.c | 2 +- drivers/net/tulip/pnic2.c | 2 +- drivers/net/typhoon.c | 4 ++-- drivers/net/wireless/orinoco.c | 2 +- drivers/net/wireless/prism54/isl_ioctl.c | 2 +- drivers/scsi/3w-9xxx.c | 2 +- drivers/serial/8250.c | 2 +- drivers/serial/serial_txx9.c | 2 +- drivers/serial/sunsu.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 2 +- drivers/usb/net/zaurus.c | 2 +- fs/mbcache.c | 2 +- include/asm-parisc/pdc.h | 2 +- include/asm-sh/addrspace.h | 2 +- include/asm-sparc64/floppy.h | 2 +- include/linux/fb.h | 2 +- mm/mempolicy.c | 2 +- net/irda/af_irda.c | 6 +++--- sound/pci/rme32.c | 8 ++++---- sound/pci/rme96.c | 8 ++++---- sound/pci/rme9652/hdspm.c | 2 +- sound/usb/usx2y/usx2yhwdeppcm.c | 2 +- 30 files changed, 39 insertions(+), 39 deletions(-) diff --git a/Documentation/m68k/README.buddha b/Documentation/m68k/README.buddha index bf802ffc98ad..ef484a719bb9 100644 --- a/Documentation/m68k/README.buddha +++ b/Documentation/m68k/README.buddha @@ -29,7 +29,7 @@ address is written to $4a, then the whole Byte is written to $48, while it doesn't matter how often you're writing to $4a as long as $48 is not touched. After $48 has been written, the whole card disappears from $e8 and is mapped to the new -address just written. Make shure $4a is written before $48, +address just written. Make sure $4a is written before $48, otherwise your chance is only 1:16 to find the board :-). The local memory-map is even active when mapped to $e8: diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c index 545447ac503a..a12059886755 100644 --- a/Documentation/networking/ifenslave.c +++ b/Documentation/networking/ifenslave.c @@ -87,7 +87,7 @@ * would fail and generate an error message in the system log. * - For opt_c: slave should not be set to the master's setting * while it is running. It was already set during enslave. To - * simplify things, it is now handeled separately. + * simplify things, it is now handled separately. * * - 2003/12/01 - Shmulik Hen * - Code cleanup and style changes diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S index 838e435e4922..cab355c0c1f7 100644 --- a/arch/arm/lib/copy_template.S +++ b/arch/arm/lib/copy_template.S @@ -236,7 +236,7 @@ /* - * Abort preanble and completion macros. + * Abort preamble and completion macros. * If a fixup handler is required then those macros must surround it. * It is assumed that the fixup code will handle the private part of * the exit macro. diff --git a/drivers/char/mxser.h b/drivers/char/mxser.h index e7fd0b08e0b7..7e188a4d602a 100644 --- a/drivers/char/mxser.h +++ b/drivers/char/mxser.h @@ -118,7 +118,7 @@ // enable CTS interrupt #define MOXA_MUST_IER_ECTSI 0x80 -// eanble RTS interrupt +// enable RTS interrupt #define MOXA_MUST_IER_ERTSI 0x40 // enable Xon/Xoff interrupt #define MOXA_MUST_IER_XINT 0x20 diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index abb03e52fe12..fee2aca3f6a5 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -5996,7 +5996,7 @@ static void usc_set_async_mode( struct mgsl_struct *info ) * <15..8> ? RxFIFO IRQ Request Level * * Note: For async mode the receive FIFO level must be set - * to 0 to aviod the situation where the FIFO contains fewer bytes + * to 0 to avoid the situation where the FIFO contains fewer bytes * than the trigger level and no more data is expected. * * <7> 0 Exited Hunt IA (Interrupt Arm) diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 905f58ba8e16..ea06e3a4dc35 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -2044,7 +2044,7 @@ static int __init edac_mc_init(void) */ clear_pci_parity_errors(); - /* Create the MC sysfs entires */ + /* Create the MC sysfs entries */ if (edac_sysfs_memctrl_setup()) { edac_printk(KERN_ERR, EDAC_MC, "Error initializing sysfs code\n"); diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index 9aa074b44dd3..cc7ff8f00e42 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -812,7 +812,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info) int cfg_base = info->cfg_base; int enabled; - /* User is shure about his config... accept it. */ + /* User is sure about his config... accept it. */ IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): " "io=0x%04x, irq=%d, dma=%d\n", __FUNCTION__, info->fir_base, info->irq, info->dma); diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 8429ceb01389..b82191d2bee1 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -2283,7 +2283,7 @@ static void set_rx_mode(struct net_device *net_dev) int i, table_entries; u32 rx_mode; - /* 635 Hash Table entires = 256(2^16) */ + /* 635 Hash Table entries = 256(2^16) */ if((sis_priv->chipset_rev >= SIS635A_900_REV) || (sis_priv->chipset_rev == SIS900B_900_REV)) table_entries = 16; diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index ee48bfd67349..d1a86a080a65 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -513,7 +513,7 @@ struct mii_phy { u_char *rst; /* Start of reset sequence in SROM */ u_int mc; /* Media Capabilities */ u_int ana; /* NWay Advertisement */ - u_int fdx; /* Full DupleX capabilites for each media */ + u_int fdx; /* Full DupleX capabilities for each media */ u_int ttm; /* Transmit Threshold Mode for each media */ u_int mci; /* 21142 MII Connector Interrupt info */ }; diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c index 55f4a9a631bc..ab985023fcca 100644 --- a/drivers/net/tulip/pnic2.c +++ b/drivers/net/tulip/pnic2.c @@ -199,7 +199,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5) /* negotiation ended successfully */ /* get the link partners reply and mask out all but - * bits 24-21 which show the partners capabilites + * bits 24-21 which show the partners capabilities * and match those to what we advertised * * then begin to interpret the results of the negotiation. diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index cde35dd87906..c1ce87a5f8d3 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -208,7 +208,7 @@ static const struct typhoon_card_info typhoon_card_info[] __devinitdata = { }; /* Notes on the new subsystem numbering scheme: - * bits 0-1 indicate crypto capabilites: (0) variable, (1) DES, or (2) 3DES + * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES * bit 4 indicates if this card has secured firmware (we don't support it) * bit 8 indicates if this is a (0) copper or (1) fiber card * bits 12-16 indicate card type: (0) client and (1) server @@ -788,7 +788,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev) /* we have two rings to choose from, but we only use txLo for now * If we start using the Hi ring as well, we'll need to update * typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(), - * and TXHI_ENTIRES to match, as well as update the TSO code below + * and TXHI_ENTRIES to match, as well as update the TSO code below * to get the right DMA address */ txRing = &tp->txLoRing; diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 6fd0bf736830..8dfdfbd5966c 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -3858,7 +3858,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, unsigned long flags; /* Note : you may have realised that, as this is a SET operation, - * this is priviledged and therefore a normal user can't + * this is privileged and therefore a normal user can't * perform scanning. * This is not an error, while the device perform scanning, * traffic doesn't flow, so it's a perfect DoS... diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index e5bb9f5ae429..989599ad33ef 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -747,7 +747,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, if (essid->length) { dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */ - /* if it is to big, trunk it */ + /* if it is too big, trunk it */ dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length); } else { dwrq->flags = 0; diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 0ab26d01877b..0d2b447c50ed 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1026,7 +1026,7 @@ static void twa_free_request_id(TW_Device_Extension *tw_dev, int request_id) tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; } /* End twa_free_request_id() */ -/* This function will get parameter table entires from the firmware */ +/* This function will get parameter table entries from the firmware */ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes) { TW_Command_Full *full_command_packet; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 5996d3cd0ed8..674b15c78f68 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1528,7 +1528,7 @@ static int serial8250_startup(struct uart_port *port) /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ serial8250_clear_fifos(up); diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index b848b7d94412..3bdee64d1a99 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -483,7 +483,7 @@ static int serial_txx9_startup(struct uart_port *port) /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ sio_set(up, TXX9_SIFCR, TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 9fe2283d91e5..1c4396c2962d 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -641,7 +641,7 @@ static int sunsu_startup(struct uart_port *port) /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 372527a83593..682bf2215660 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -158,7 +158,7 @@ static int ohci_s3c2410_hub_control ( "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", hcd, typeReq, wValue, wIndex, buf, wLength); - /* if we are only an humble host without any special capabilites + /* if we are only an humble host without any special capabilities * process the request straight away and exit */ if (info == NULL) { diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index 9c5ab251370c..f7ac9d6b9856 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -217,7 +217,7 @@ static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf) * with devices that use it and those that don't. */ if ((detail->bDetailData[1] & ~0x02) != 0x01) { - /* bmDataCapabilites == 0 would be fine too, + /* bmDataCapabilities == 0 would be fine too, * but framing is minidriver-coupled for now. */ bad_detail: diff --git a/fs/mbcache.c b/fs/mbcache.c index 73e754fea2d8..e4fde1ab22cd 100644 --- a/fs/mbcache.c +++ b/fs/mbcache.c @@ -311,7 +311,7 @@ fail: /* * mb_cache_shrink() * - * Removes all cache entires of a device from the cache. All cache entries + * Removes all cache entries of a device from the cache. All cache entries * currently in use cannot be freed, and thus remain in the cache. All others * are freed. * diff --git a/include/asm-parisc/pdc.h b/include/asm-parisc/pdc.h index 8e23e4c674f6..0a3face6c480 100644 --- a/include/asm-parisc/pdc.h +++ b/include/asm-parisc/pdc.h @@ -333,7 +333,7 @@ struct pdc_model { /* for PDC_MODEL */ unsigned long curr_key; }; -/* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */ +/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ #define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */ #define PDC_MODEL_NVA_MASK (3 << 4) diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h index dbb05d1a26d1..720afc11c2ca 100644 --- a/include/asm-sh/addrspace.h +++ b/include/asm-sh/addrspace.h @@ -13,7 +13,7 @@ #include -/* Memory segments (32bit Priviledged mode addresses) */ +/* Memory segments (32bit Privileged mode addresses) */ #define P0SEG 0x00000000 #define P1SEG 0x80000000 #define P2SEG 0xa0000000 diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h index 49d49a285943..6a95d5d0c576 100644 --- a/include/asm-sparc64/floppy.h +++ b/include/asm-sparc64/floppy.h @@ -738,7 +738,7 @@ static unsigned long __init sun_floppy_init(void) if (!sun_floppy_types[0] && sun_floppy_types[1]) { /* * Set the drive exchange bit in FCR on NS87303, - * make shure other bits are sane before doing so. + * make sure other bits are sane before doing so. */ ns87303_modify(config, FER, FER_EDM, 0); ns87303_modify(config, ASC, ASC_DRV2_SEL, 0); diff --git a/include/linux/fb.h b/include/linux/fb.h index 2cb19e6503aa..d03fadfcafe3 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -734,7 +734,7 @@ struct fb_tile_ops { /* A driver may set this flag to indicate that it does want a set_par to be * called every time when fbcon_switch is executed. The advantage is that with - * this flag set you can really be shure that set_par is always called before + * this flag set you can really be sure that set_par is always called before * any of the functions dependant on the correct hardware state or altering * that state, even if you are using some broken X releases. The disadvantage * is that it introduces unwanted delays to every console switch if set_par diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 4f71cfd29c6f..dec8249e972d 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -912,7 +912,7 @@ asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode, /* * Check if this process has the right to modify the specified * process. The right exists if the process has administrative - * capabilities, superuser priviledges or the same + * capabilities, superuser privileges or the same * userid as the target process. */ if ((current->euid != task->suid) && (current->euid != task->uid) && diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index 759445648667..627b11342233 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -1302,7 +1302,7 @@ static int irda_sendmsg(struct kiocb *iocb, struct socket *sock, if (sk->sk_state != TCP_ESTABLISHED) return -ENOTCONN; - /* Check that we don't send out to big frames */ + /* Check that we don't send out too big frames */ if (len > self->max_data_size) { IRDA_DEBUG(2, "%s(), Chopping frame from %zd to %d bytes!\n", __FUNCTION__, len, self->max_data_size); @@ -1546,7 +1546,7 @@ static int irda_sendmsg_dgram(struct kiocb *iocb, struct socket *sock, IRDA_ASSERT(self != NULL, return -1;); /* - * Check that we don't send out to big frames. This is an unreliable + * Check that we don't send out too big frames. This is an unreliable * service, so we have no fragmentation and no coalescence */ if (len > self->max_data_size) { @@ -1642,7 +1642,7 @@ static int irda_sendmsg_ultra(struct kiocb *iocb, struct socket *sock, } /* - * Check that we don't send out to big frames. This is an unreliable + * Check that we don't send out too big frames. This is an unreliable * service, so we have no fragmentation and no coalescence */ if (len > self->max_data_size) { diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c index 0cbef5fe6c63..ab78544bf042 100644 --- a/sound/pci/rme32.c +++ b/sound/pci/rme32.c @@ -313,7 +313,7 @@ static int snd_rme32_capture_copy(struct snd_pcm_substream *substream, int chann } /* - * SPDIF I/O capabilites (half-duplex mode) + * SPDIF I/O capabilities (half-duplex mode) */ static struct snd_pcm_hardware snd_rme32_spdif_info = { .info = (SNDRV_PCM_INFO_MMAP_IOMEM | @@ -339,7 +339,7 @@ static struct snd_pcm_hardware snd_rme32_spdif_info = { }; /* - * ADAT I/O capabilites (half-duplex mode) + * ADAT I/O capabilities (half-duplex mode) */ static struct snd_pcm_hardware snd_rme32_adat_info = { @@ -364,7 +364,7 @@ static struct snd_pcm_hardware snd_rme32_adat_info = }; /* - * SPDIF I/O capabilites (full-duplex mode) + * SPDIF I/O capabilities (full-duplex mode) */ static struct snd_pcm_hardware snd_rme32_spdif_fd_info = { .info = (SNDRV_PCM_INFO_MMAP | @@ -390,7 +390,7 @@ static struct snd_pcm_hardware snd_rme32_spdif_fd_info = { }; /* - * ADAT I/O capabilites (full-duplex mode) + * ADAT I/O capabilities (full-duplex mode) */ static struct snd_pcm_hardware snd_rme32_adat_fd_info = { diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c index 0e694b011dcc..6c2a9f4a7659 100644 --- a/sound/pci/rme96.c +++ b/sound/pci/rme96.c @@ -359,7 +359,7 @@ snd_rme96_capture_copy(struct snd_pcm_substream *substream, } /* - * Digital output capabilites (S/PDIF) + * Digital output capabilities (S/PDIF) */ static struct snd_pcm_hardware snd_rme96_playback_spdif_info = { @@ -388,7 +388,7 @@ static struct snd_pcm_hardware snd_rme96_playback_spdif_info = }; /* - * Digital input capabilites (S/PDIF) + * Digital input capabilities (S/PDIF) */ static struct snd_pcm_hardware snd_rme96_capture_spdif_info = { @@ -417,7 +417,7 @@ static struct snd_pcm_hardware snd_rme96_capture_spdif_info = }; /* - * Digital output capabilites (ADAT) + * Digital output capabilities (ADAT) */ static struct snd_pcm_hardware snd_rme96_playback_adat_info = { @@ -442,7 +442,7 @@ static struct snd_pcm_hardware snd_rme96_playback_adat_info = }; /* - * Digital input capabilites (ADAT) + * Digital input capabilities (ADAT) */ static struct snd_pcm_hardware snd_rme96_capture_adat_info = { diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 980b9cd689dd..b5538efd146b 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2256,7 +2256,7 @@ static int snd_hdspm_create_controls(struct snd_card *card, struct hdspm * hdspm } /* Channel playback mixer as default control - Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats to big for any alsamixer + Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats too big for any alsamixer they are accesible via special IOCTL on hwdep and the mixer 2dimensional mixer control */ diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c index 315855082fe1..fe67a92e2a1a 100644 --- a/sound/usb/usx2y/usx2yhwdeppcm.c +++ b/sound/usb/usx2y/usx2yhwdeppcm.c @@ -404,7 +404,7 @@ static void usX2Y_usbpcm_subs_startup(struct snd_usX2Y_substream *subs) struct usX2Ydev * usX2Y = subs->usX2Y; usX2Y->prepare_subs = subs; subs->urb[0]->start_frame = -1; - smp_wmb(); // Make shure above modifications are seen by i_usX2Y_subs_startup() + smp_wmb(); // Make sure above modifications are seen by i_usX2Y_subs_startup() usX2Y_urbs_set_complete(usX2Y, i_usX2Y_usbpcm_subs_startup); } -- 2.30.2