From 7eda44f53647cb54cb9b2eb13b27417cd0128a37 Mon Sep 17 00:00:00 2001 From: Chris Webb Date: Mon, 10 Jun 2024 09:54:23 +0100 Subject: [PATCH] uboot-mediatek: support GL.iNet GL-X3000 and GL-XE3000 Add u-boot support based on the kernel dts introduced in d1016446 and the GL-MT6000 u-boot support in fe10f974. The pcie-mediatek-gen3 kernel driver doesn't like hotplug, so to work in PCIe mode, the 5G modem on this device needs to be switched on by u-boot before starting the kernel. Include an init_modem step in the boot_system action to set the relevant gpios. (The factory bootloader does the same, using Mediatek SDK-specific gpio_power_clr and gpio_pull_up.) Ideally the modem would be started using gpio-hog in the device tree, but this will need to wait until mediatek gpio-hog support is fixed upstream: https://lore.kernel.org/u-boot/6ef2583e85eea60560d7776377d662779e7c44e5.1722419839.git.chris@arachsys.com/ The bootloader can be replaced using the built-in web interface of the factory bootloader. Hold the reset button for five seconds while powering on the device and it will boot into a recovery http server. http://192.168.1.1/uboot.html and http://192.168.1.1/bl2.html can then be used to upload openwrt-mediatek-filogic-glinet_gl-x3000-bl31-uboot.fip and openwrt-mediatek-filogic-glinet_gl-x3000-preloader.bin respectively. Alternatively, from a root shell on the running system, unlock the boot partition with echo 0 >/sys/block/mmcblk0boot0/force_ro then write openwrt-mediatek-filogic-glinet_gl-x3000-bl31-uboot.fip to /dev/mmcblk0p4 and openwrt-mediatek-filogic-glinet_gl-x3000-preloader.bin to /dev/mmcblk0boot0. Signed-off-by: Chris Webb Link: https://github.com/openwrt/openwrt/pull/15645 Signed-off-by: Hauke Mehrtens --- .../uboot-envtools/files/mediatek_filogic | 2 + package/boot/uboot-mediatek/Makefile | 26 ++ .../patches/454-add-glinet-x3000.patch | 288 ++++++++++++++++++ target/linux/mediatek/image/filogic.mk | 6 + 4 files changed, 322 insertions(+) create mode 100644 package/boot/uboot-mediatek/patches/454-add-glinet-x3000.patch diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 73a7dc1517..a38024de65 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -86,6 +86,8 @@ zbtlink,zbt-z8103ax) dlink,aquila-pro-ai-m30-a1) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000" ;; +glinet,gl-x3000|\ +glinet,gl-xe3000|\ glinet,gl-mt2500|\ glinet,gl-mt6000) local envdev=$(find_mmc_part "u-boot-env") diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index 431ab54c74..d6e9be913c 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -255,6 +255,30 @@ define U-Boot/mt7981_cmcc_rax3000m-nand DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr4 endef +define U-Boot/mt7981_glinet_gl-x3000 + NAME:=GL.iNet GL-X3000 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=glinet_gl-x3000 + UBOOT_CONFIG:=mt7981_glinet_gl-x3000 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=emmc + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4 +endef + +define U-Boot/mt7981_glinet_gl-xe3000 + NAME:=GL.iNet GL-XE3000 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=glinet_gl-xe3000 + UBOOT_CONFIG:=mt7981_glinet_gl-x3000 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=emmc + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4 +endef + define U-Boot/mt7981_h3c_magic-nx30-pro NAME:=H3C Magic NX30 Pro BUILD_SUBTARGET:=filogic @@ -761,6 +785,8 @@ UBOOT_TARGETS := \ mt7981_abt_asr3000 \ mt7981_cmcc_rax3000m-emmc \ mt7981_cmcc_rax3000m-nand \ + mt7981_glinet_gl-x3000 \ + mt7981_glinet_gl-xe3000 \ mt7981_h3c_magic-nx30-pro \ mt7981_jcg_q30-pro \ mt7981_nokia_ea0326gmp \ diff --git a/package/boot/uboot-mediatek/patches/454-add-glinet-x3000.patch b/package/boot/uboot-mediatek/patches/454-add-glinet-x3000.patch new file mode 100644 index 0000000000..0cad80ed5a --- /dev/null +++ b/package/boot/uboot-mediatek/patches/454-add-glinet-x3000.patch @@ -0,0 +1,288 @@ +diff --git a/arch/arm/dts/mt7981-glinet-gl-x3000.dts b/arch/arm/dts/mt7981-glinet-gl-x3000.dts +new file mode 100644 +index 0000000..911a702 +--- /dev/null ++++ b/arch/arm/dts/mt7981-glinet-gl-x3000.dts +@@ -0,0 +1,144 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "GL.iNet GL-X3000"; ++ compatible = "glinet,gl-x3000", "mediatek,mt7981"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x20000000>; ++ }; ++ ++ reg_3p3v: regulator-3p3v { ++ compatible = "regulator-fixed"; ++ regulator-name = "fixed-3.3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ wifi2g { ++ label = "green:wifi2g"; ++ gpios = <&gpio 30 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wifi5g { ++ label = "green:wifi5g"; ++ gpios = <&gpio 38 GPIO_ACTIVE_LOW>; ++ }; ++ ++ 5g_led1 { ++ label = "green:5g:led1"; ++ gpios = <&gpio 6 GPIO_ACTIVE_LOW>; ++ }; ++ ++ 5g_led2 { ++ label = "green:5g:led2"; ++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ 5g_led3 { ++ label = "green:5g:led3"; ++ gpios = <&gpio 8 GPIO_ACTIVE_LOW>; ++ }; ++ ++ 5g_led4 { ++ label = "green:5g:led4"; ++ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ power { ++ label = "green:power"; ++ gpios = <&gpio 39 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wan { ++ label = "green:wan"; ++ gpios = <&gpio 31 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <1>; ++ phy-mode = "gmii"; ++ phy-handle = <&phy0>; ++ ++ mdio { ++ phy0: ethernet-phy@0 { ++ compatible = "ethernet-phy-id03a2.9461"; ++ reg = <0x0>; ++ phy-mode = "gmii"; ++ }; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_default>; ++ max-frequency = <52000000>; ++ bus-width = <8>; ++ cap-mmc-hw-highspeed; ++ cap-mmc-hw-reset; ++ vmmc-supply = <®_3p3v>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ mmc0_pins_default: mmc0-pins-default { ++ mux { ++ function = "flash"; ++ groups = "emmc_45"; ++ }; ++ conf-cmd-dat { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", ++ "SPI0_CS", "SPI0_HOLD", "SPI0_WP", ++ "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; ++ input-enable; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ conf-clk { ++ pins = "SPI1_CS"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ conf-rst { ++ pins = "GPIO_WPS"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; +diff --git a/configs/mt7981_glinet_gl-x3000_defconfig b/configs/mt7981_glinet_gl-x3000_defconfig +new file mode 100644 +index 0000000..96ad96f +--- /dev/null ++++ b/configs/mt7981_glinet_gl-x3000_defconfig +@@ -0,0 +1,100 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_ENV_SIZE=0x80000 ++CONFIG_ENV_OFFSET=0x400000 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-glinet-gl-x3000" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART=y ++CONFIG_ENV_VARS_UBOOT_CONFIG=y ++# CONFIG_EXPERT is not set ++CONFIG_FIT=y ++# CONFIG_BOOTSTD is not set ++# CONFIG_LEGACY_IMAGE_FORMAT is not set ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_USE_BOOTCOMMAND=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-glinet-gl-x3000.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_SYS_CBSIZE=512 ++CONFIG_SYS_PBSIZE=1049 ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++# CONFIG_BOOTM_NETBSD is not set ++# CONFIG_BOOTM_PLAN9 is not set ++# CONFIG_BOOTM_RTEMS is not set ++# CONFIG_BOOTM_VXWORKS is not set ++CONFIG_CMD_BOOTMENU=y ++# CONFIG_CMD_ELF is not set ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++# CONFIG_CMD_UNLZ4 is not set ++# CONFIG_CMD_UNZIP is not set ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_GPT_RENAME=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_READ=y ++CONFIG_CMD_WRITE=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_PARTITION_TYPE_GUID=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="glinet_gl-x3000_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++# CONFIG_EFI_LOADER is not set ++CONFIG_LMB_MAX_REGIONS=64 ++# CONFIG_TOOLS_LIBCRYPTO is not set +diff --git a/glinet_gl-x3000_env b/glinet_gl-x3000_env +new file mode 100644 +index 0000000..e624e41 +--- /dev/null ++++ b/glinet_gl-x3000_env +@@ -0,0 +1,26 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++bootdelay=3 ++bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-x3000-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-glinet_gl-x3000-bl31-uboot.fip ++bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-x3000-squashfs-factory.bin ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_title= *** U-Boot Boot Menu for GL-iNet GL-X3000 *** ++bootmenu_0=Startup system (Default).=run boot_system ++bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return ++bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_3=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_4=Reboot.=reset ++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset ++filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200 ++mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size ++boot_system=run init_modem && part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm ++boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2 ++emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt ++emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0 ++emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt ++init_modem=gpio set 10; gpio set 5; gpio set 9; gpio set 11; sleep 0.1; gpio clear 10; sleep 1 ++reset_factory=eraseenv && reset diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 522c7a0180..bd8fcb16b6 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -692,7 +692,11 @@ define Device/glinet_gl-x3000-xe3000-common DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware mkf2fs \ kmod-fs-f2fs kmod-hwmon-pwmfan kmod-usb3 kmod-usb-serial-option \ kmod-usb-storage kmod-usb-net-qmi-wwan uqmi + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 emmc-ddr4 endef define Device/glinet_gl-x3000 @@ -700,6 +704,7 @@ define Device/glinet_gl-x3000 DEVICE_DTS := mt7981a-glinet-gl-x3000 SUPPORTED_DEVICES := glinet,gl-x3000 $(call Device/glinet_gl-x3000-xe3000-common) + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot glinet_gl-x3000 endef TARGET_DEVICES += glinet_gl-x3000 @@ -708,6 +713,7 @@ define Device/glinet_gl-xe3000 DEVICE_DTS := mt7981a-glinet-gl-xe3000 SUPPORTED_DEVICES := glinet,gl-xe3000 $(call Device/glinet_gl-x3000-xe3000-common) + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot glinet_gl-xe3000 endef TARGET_DEVICES += glinet_gl-xe3000 -- 2.30.2