From 7e8b5f9c557000110be7911811f144002cce2a29 Mon Sep 17 00:00:00 2001 From: Mike Baker Date: Fri, 12 May 2006 19:08:03 +0000 Subject: [PATCH] fix BR2_ and CONFIG_ issues SVN-Revision: 3769 --- openwrt/Config.in | 1 + openwrt/target/Config.in | 4 +- openwrt/target/linux/Config.in | 296 +++++++++--------- openwrt/target/linux/ar7-2.4/Config.in | 16 +- openwrt/target/linux/aruba-2.6/Config.in | 4 +- openwrt/target/linux/aruba-2.6/Makefile | 2 +- openwrt/target/linux/brcm-2.4/Config.in | 8 +- openwrt/target/linux/image/Makefile | 6 +- openwrt/target/linux/image/aruba/Makefile | 2 +- openwrt/target/linux/image/jffs2.mk | 2 +- openwrt/target/linux/package/Makefile | 32 +- openwrt/target/linux/package/alsa/Config.in | 10 +- .../package/bcm43xx-standalone/Config.in | 6 +- openwrt/target/linux/package/diag/Config.in | 4 +- openwrt/target/linux/package/fuse/Config.in | 4 +- openwrt/target/linux/package/hostap/Config.in | 18 +- .../linux/package/ieee80211-dscape/Config.in | 4 +- .../linux/package/madwifi-old/Config.in | 4 +- .../target/linux/package/madwifi-old/Makefile | 4 +- .../target/linux/package/madwifi/Config.in | 6 +- openwrt/target/linux/package/madwifi/Makefile | 4 +- .../target/linux/package/mini_fo/Config.in | 4 +- .../target/linux/package/openswan/Config.in | 4 +- openwrt/target/linux/package/shfs/Config.in | 4 +- .../target/linux/package/spca5xx/Config.in | 4 +- openwrt/target/linux/package/switch/Config.in | 6 +- .../target/linux/package/ueagle-atm/Config.in | 6 +- .../target/linux/package/wlcompat/Config.in | 8 +- openwrt/target/linux/package/zd1211/Config.in | 6 +- openwrt/target/linux/rules.mk | 4 +- openwrt/target/sdk/Config.in | 4 +- openwrt/target/sdk/Makefile | 2 +- openwrt/toolchain/binutils/Makefile | 2 +- openwrt/toolchain/gcc/Makefile | 8 +- openwrt/toolchain/gdb/Config.in | 2 +- openwrt/toolchain/uClibc/Makefile | 8 +- 36 files changed, 256 insertions(+), 253 deletions(-) diff --git a/openwrt/Config.in b/openwrt/Config.in index 71f05689770f..71db916c6e6d 100644 --- a/openwrt/Config.in +++ b/openwrt/Config.in @@ -34,5 +34,6 @@ config JLEVEL Number of jobs to run simultanesouly source "toolchain/Config.in" +source "target/linux/Config.in" source ".config.in" diff --git a/openwrt/target/Config.in b/openwrt/target/Config.in index 7f07ff0ac102..f20504031cc4 100644 --- a/openwrt/target/Config.in +++ b/openwrt/target/Config.in @@ -74,7 +74,7 @@ config LINUX_2_6_AU1000 Build firmware for AMD Alchemy 1500 boards (e.g. 4G-Systems Mesh/Access Cube ...) -if CONFIG_DEVEL +if DEVEL config LINUX_2_6_ARM bool "UNSUPPORTED little-endian arm platform" @@ -195,7 +195,7 @@ config ARCH default "i386" if i386 default "m68k" if m68k default "mips" if mips - default "mipsel" if mipsel || !CONFIG_DEVEL + default "mipsel" if mipsel || !DEVEL default "powerpc" if powerpc default "sh3" if sh3 default "sh3eb" if sh3eb diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in index 6c7f5385e926..5257c78ad0b3 100644 --- a/openwrt/target/linux/Config.in +++ b/openwrt/target/linux/Config.in @@ -1,19 +1,19 @@ menu "Target Root Filesystem" - config BR2_TARGET_ROOTFS_JFFS2 + config TARGET_ROOTFS_JFFS2 bool "jffs2" default y help Build a jffs2 root filesystem - config BR2_TARGET_ROOTFS_SQUASHFS_LZMA + config TARGET_ROOTFS_SQUASHFS_LZMA bool "squashfs-lzma" default y - depends !BR2_LINUX_2_6_ARUBA + depends !LINUX_2_6_ARUBA help Build a squashfs-lzma root filesystem - config BR2_TARGET_ROOTFS_TGZ + config TARGET_ROOTFS_TGZ bool "tgz" default y help @@ -25,88 +25,90 @@ menu "Kernel Configuration / Device Support" comment "Device specific configuration" +source "target/linux/*-2.[46]/Config.in" + comment "Kernel modules" menu "Networking modules" -config BR2_PACKAGE_KMOD_ATM +config PACKAGE_KMOD_ATM prompt "kmod-atm.......................... ATM support" tristate - default y if BR2_LINUX_2_4_AR7 + default y if LINUX_2_4_AR7 default m help ATM support -config BR2_PACKAGE_KMOD_GRE +config PACKAGE_KMOD_GRE prompt "kmod-gre.......................... GRE tunneling driver" tristate default m help Kernel support for GRE tunnels -config BR2_PACKAGE_KMOD_IMQ +config PACKAGE_KMOD_IMQ prompt "kmod-imq.......................... Intermediate Queueing device" tristate default m help Kernel support for the Intermediate Queueing device -config BR2_PACKAGE_KMOD_IPV6 +config PACKAGE_KMOD_IPV6 prompt "kmod-ipv6......................... IPv6 support" tristate default m help Kernel modules for IPv6 protocol support -config BR2_PACKAGE_KMOD_PPP +config PACKAGE_KMOD_PPP prompt "kmod-ppp.......................... PPP support" tristate default m help Kernel support for PPP -config BR2_PACKAGE_KMOD_MPPE +config PACKAGE_KMOD_MPPE prompt "kmod-mppe....................... PPP MPPE/MPPC module" tristate default m - depends BR2_PACKAGE_KMOD_PPP - select BR2_PACKAGE_KMOD_CRYPTO + depends PACKAGE_KMOD_PPP + select PACKAGE_KMOD_CRYPTO help Support for Microsoft PPP Encryption/Compression -config BR2_PACKAGE_KMOD_PPPOATM +config PACKAGE_KMOD_PPPOATM prompt "kmod-pppoatm.................... PPPoA (PPP over ATM) kernel support" tristate - default y if BR2_LINUX_2_4_AR7 + default y if LINUX_2_4_AR7 default m - depends BR2_PACKAGE_KMOD_PPP - select BR2_PACKAGE_KMOD_ATM + depends PACKAGE_KMOD_PPP + select PACKAGE_KMOD_ATM help Support for PPP over ATM -config BR2_PACKAGE_KMOD_PPPOE +config PACKAGE_KMOD_PPPOE prompt "kmod-pppoe...................... PPPoE (PPP over Ethernet) kernel support" tristate default m - depends BR2_PACKAGE_KMOD_PPP + depends PACKAGE_KMOD_PPP help Support for PPP over Ethernet -config BR2_PACKAGE_KMOD_RING +config PACKAGE_KMOD_RING prompt "kmod-ring......................... PF Ring" tristate default m help PF Ring -config BR2_PACKAGE_KMOD_SCHED +config PACKAGE_KMOD_SCHED prompt "kmod-sched........................ Traffic schedulers" tristate default m help Kernel schedulers for IP traffic -config BR2_PACKAGE_KMOD_TUN +config PACKAGE_KMOD_TUN prompt "kmod-tun.......................... Universal TUN/TAP driver" tristate default m @@ -117,44 +119,44 @@ endmenu menu "Filtering/Firewalling" -config BR2_PACKAGE_KMOD_ARPTABLES +config PACKAGE_KMOD_ARPTABLES prompt "kmod-arptables.................... ARP firewalling support" tristate default m help Kernel modules for ARP firewalling -config BR2_PACKAGE_KMOD_EBTABLES +config PACKAGE_KMOD_EBTABLES prompt "kmod-ebtables..................... Ethernet Bridge firewalling support" tristate default m help Kernel modules for bridge firewalling -config BR2_PACKAGE_KMOD_IPTABLES +config PACKAGE_KMOD_IPTABLES prompt "kmod-iptables..................... Core Netfilter modules for IPv4 firewalling" tristate default y help Kernel modules for IPv4 firewalling -config BR2_PACKAGE_KMOD_IPTABLES_EXTRA +config PACKAGE_KMOD_IPTABLES_EXTRA prompt "kmod-iptables-extra............... Extra Netfilter modules for IPv4 firewalling (meta-package)" tristate default m - select BR2_PACKAGE_KMOD_IPT_CONNTRACK - select BR2_PACKAGE_KMOD_IPT_FILTER - select BR2_PACKAGE_KMOD_IPT_IPOPT - select BR2_PACKAGE_KMOD_IPT_IPSEC - select BR2_PACKAGE_KMOD_IPT_NAT - select BR2_PACKAGE_KMOD_IPT_NAT_EXTRA - select BR2_PACKAGE_KMOD_IPT_QUEUE - select BR2_PACKAGE_KMOD_IPT_ULOG - select BR2_PACKAGE_KMOD_IPT_EXTRA + select PACKAGE_KMOD_IPT_CONNTRACK + select PACKAGE_KMOD_IPT_FILTER + select PACKAGE_KMOD_IPT_IPOPT + select PACKAGE_KMOD_IPT_IPSEC + select PACKAGE_KMOD_IPT_NAT + select PACKAGE_KMOD_IPT_NAT_EXTRA + select PACKAGE_KMOD_IPT_QUEUE + select PACKAGE_KMOD_IPT_ULOG + select PACKAGE_KMOD_IPT_EXTRA help Extra Netfilter kernel modules for IPv4 firewalling (meta-package) -config BR2_PACKAGE_KMOD_IPT_CONNTRACK +config PACKAGE_KMOD_IPT_CONNTRACK prompt "kmod-ipt-conntrack................ Netfilter modules for connection tracking" tristate default m @@ -166,7 +168,7 @@ config BR2_PACKAGE_KMOD_IPT_CONNTRACK * ipt_helper * ipt_connmark/CONNMARK -config BR2_PACKAGE_KMOD_IPT_FILTER +config PACKAGE_KMOD_IPT_FILTER prompt "kmod-ipt-filter................... Netfilter modules for packet content inspection" tristate default m @@ -177,7 +179,7 @@ config BR2_PACKAGE_KMOD_IPT_FILTER * ipt_ipp2p * ipt_layer7 -config BR2_PACKAGE_KMOD_IPT_IPOPT +config PACKAGE_KMOD_IPT_IPOPT prompt "kmod-ipt-ipopt.................... Netfilter modules for matching/changing IP packet options" tristate default m @@ -194,7 +196,7 @@ config BR2_PACKAGE_KMOD_IPT_IPOPT * ipt_ttl/TTL * ipt_unclean -config BR2_PACKAGE_KMOD_IPT_IPSEC +config PACKAGE_KMOD_IPT_IPSEC prompt "kmod-ipt-ipsec.................... Netfilter modules for matching IPsec packets" tristate default m @@ -205,7 +207,7 @@ config BR2_PACKAGE_KMOD_IPT_IPSEC * ipt_ah * ipt_esp -config BR2_PACKAGE_KMOD_IPT_NAT +config PACKAGE_KMOD_IPT_NAT prompt "kmod-ipt-nat...................... Netfilter modules for different NAT targets" tristate default m @@ -215,7 +217,7 @@ config BR2_PACKAGE_KMOD_IPT_NAT Includes: * ipt_REDIRECT -config BR2_PACKAGE_KMOD_IPT_NAT_EXTRA +config PACKAGE_KMOD_IPT_NAT_EXTRA prompt "kmod-ipt-nat-extra................ Extra Netfilter NAT modules for special protocols" tristate default m @@ -233,7 +235,7 @@ config BR2_PACKAGE_KMOD_IPT_NAT_EXTRA * ip_nat_snmp_basic * ip_conntrack_tftp -config BR2_PACKAGE_KMOD_IPT_QUEUE +config PACKAGE_KMOD_IPT_QUEUE prompt "kmod-ipt-queue.................... Netfilter module for user-space packet queueing" tristate default m @@ -243,7 +245,7 @@ config BR2_PACKAGE_KMOD_IPT_QUEUE Includes: * ipt_QUEUE -config BR2_PACKAGE_KMOD_IPT_ULOG +config PACKAGE_KMOD_IPT_ULOG prompt "kmod-ipt-ulog..................... Netfilter module for user-space packet logging" tristate default m @@ -253,7 +255,7 @@ config BR2_PACKAGE_KMOD_IPT_ULOG Includes: * ipt_ULOG -config BR2_PACKAGE_KMOD_IPT_EXTRA +config PACKAGE_KMOD_IPT_EXTRA prompt "kmod-ipt-extra.................... Other extra Netfilter modules" tristate default m @@ -267,11 +269,11 @@ config BR2_PACKAGE_KMOD_IPT_EXTRA * ipt_pkttype * ipt_recent -config BR2_PACKAGE_KMOD_IP6TABLES +config PACKAGE_KMOD_IP6TABLES prompt "kmod-ip6tables.................... Kernel modules for ip6tables" tristate default m - depends BR2_PACKAGE_KMOD_IPV6 + depends PACKAGE_KMOD_IPV6 help IPv6 firewalling support @@ -279,11 +281,11 @@ endmenu menu "Block devices support" -config BR2_PACKAGE_KMOD_IDE +config PACKAGE_KMOD_IDE prompt "kmod-ide.......................... IDE support" tristate default m - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM help Kernel modules for IDE support useful for usb mass storage devices (e.g. on WL-HDD) @@ -292,16 +294,16 @@ config BR2_PACKAGE_KMOD_IDE - ide-core - ide-detect - ide-disk - - pdc202xx_old + - pdc202old -config BR2_PACKAGE_KMOD_LOOP +config PACKAGE_KMOD_LOOP prompt "kmod-loop......................... Loop mount support" tristate default m help Kernel module for loop mount support -config BR2_PACKAGE_KMOD_NBD +config PACKAGE_KMOD_NBD prompt "kmod-nbd.......................... Network Block Device" tristate default m @@ -310,45 +312,45 @@ config BR2_PACKAGE_KMOD_NBD endmenu -config BR2_PACKAGE_KMOD_CRYPTO +config PACKAGE_KMOD_CRYPTO prompt "CryptoAPI modules" tristate default m - select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE + select BUSYBOX_FEATURE_CHECK_TAINTED_MODULE help Kernel modules for cryptographic algorithms menu "Filesystems support" -config BR2_PACKAGE_KMOD_FS_CIFS +config PACKAGE_KMOD_FS_CIFS prompt "kmod-fs-cifs...................... CIFS support" tristate default m help Kernel modules for CIFS support -config BR2_PACKAGE_KMOD_FS_EXT2 +config PACKAGE_KMOD_FS_EXT2 prompt "kmod-fs-ext2...................... EXT2 filesystem support" tristate default m help Kernel modules for EXT2 filesystem support -config BR2_PACKAGE_KMOD_FS_EXT3 +config PACKAGE_KMOD_FS_EXT3 prompt "kmod-fs-ext3...................... EXT3 filesystem support" tristate default m help Kernel modules for EXT3 filesystem support -config BR2_PACKAGE_KMOD_FS_HFSPLUS +config PACKAGE_KMOD_FS_HFSPLUS prompt "kmod-fs-hfsplus................... HFS+ filesystem support" tristate default m help Kernel modules for HFS+ filesystem support -config BR2_PACKAGE_KMOD_FS_NFS +config PACKAGE_KMOD_FS_NFS prompt "kmod-fs-nfs....................... NFS support" tristate default m @@ -356,7 +358,7 @@ config BR2_PACKAGE_KMOD_FS_NFS Kernel modules for NFS support Includes lockd, nfs and sunrpc -config BR2_PACKAGE_KMOD_FS_VFAT +config PACKAGE_KMOD_FS_VFAT prompt "kmod-fs-vfat...................... VFAT filesystem support" tristate default m @@ -364,7 +366,7 @@ config BR2_PACKAGE_KMOD_FS_VFAT Kernel modules for VFAT filesystem support useful for usb mass storage devices -config BR2_PACKAGE_KMOD_FS_XFS +config PACKAGE_KMOD_FS_XFS prompt "kmod-fs-xfs....................... XFS filesystem support" tristate default m @@ -375,13 +377,13 @@ endmenu menu "Multimedia devices support" -config BR2_PACKAGE_KMOD_PWC +config PACKAGE_KMOD_PWC prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras" tristate - depends BR2_PACKAGE_KMOD_USB + depends PACKAGE_KMOD_USB default m -config BR2_PACKAGE_KMOD_SOUNDCORE +config PACKAGE_KMOD_SOUNDCORE prompt "kmod-soundcore.................... Soundcard support" tristate default n @@ -389,7 +391,7 @@ config BR2_PACKAGE_KMOD_SOUNDCORE Base support for soundcards Requires either USB soundcard support (OSS) or ALSA package to be useful -config BR2_PACKAGE_KMOD_VIDEODEV +config PACKAGE_KMOD_VIDEODEV prompt "kmod-videodev..................... Video (For Linux) kernel support" tristate default m @@ -398,62 +400,62 @@ endmenu menu "Native Language support" -config BR2_PACKAGE_KMOD_NLS_BASE +config PACKAGE_KMOD_NLS_BASE prompt "kmod-nls-base..................... Native Language support" tristate default m help Kernel native language support -config BR2_PACKAGE_KMOD_NLS_CP437 +config PACKAGE_KMOD_NLS_CP437 prompt "kmod-nls-cp437.................. Codepage 437 (United States, Canada)" tristate default m - depends BR2_PACKAGE_KMOD_NLS_BASE + depends PACKAGE_KMOD_NLS_BASE help Kernel native language support -config BR2_PACKAGE_KMOD_NLS_CP850 +config PACKAGE_KMOD_NLS_CP850 prompt "kmod-nls-cp850.................. Codepage 850 (Europe)" tristate default m - depends BR2_PACKAGE_KMOD_NLS_BASE + depends PACKAGE_KMOD_NLS_BASE help Kernel native language support -config BR2_PACKAGE_KMOD_NLS_ISO8859_1 +config PACKAGE_KMOD_NLS_ISO8859_1 prompt "kmod-nls-iso8859-1.............. NLS ISO 8859-1 (Latin 1; Western European Languages)" tristate default m - depends BR2_PACKAGE_KMOD_NLS_BASE + depends PACKAGE_KMOD_NLS_BASE help Kernel native language support -config BR2_PACKAGE_KMOD_NLS_ISO8859_15 +config PACKAGE_KMOD_NLS_ISO8859_15 prompt "kmod-nls-iso8859-15............. NLS ISO 8859-15 (Latin 15; Western European Languages with Euro)" tristate default m - depends BR2_PACKAGE_KMOD_NLS_BASE + depends PACKAGE_KMOD_NLS_BASE help Kernel native language support -config BR2_PACKAGE_KMOD_NLS_UTF8 +config PACKAGE_KMOD_NLS_UTF8 prompt "kmod-nls-utf8................... NLS UTF8" tristate default m - depends BR2_PACKAGE_KMOD_NLS_BASE + depends PACKAGE_KMOD_NLS_BASE help Kernel native language support endmenu menu "Network devices support" - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 + depends LINUX_2_4_X86 || LINUX_2_6_X86 -config BR2_PACKAGE_KMOD_NET_3C59X +config PACKAGE_KMOD_NET_3C59X prompt "kmod-net-3c59x.................... 3Com 3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" Ethernet kernel support" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help This option enables driver support for a large number of 10mbps and @@ -465,19 +467,19 @@ config BR2_PACKAGE_KMOD_NET_3C59X * "Tornado" (3c905) PCI * "Hurricane" (3c555/3cSOHO) PCI -config BR2_PACKAGE_KMOD_NET_8139TOO +config PACKAGE_KMOD_NET_8139TOO prompt "kmod-net-8139too.................. RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help This is a driver for the Fast Ethernet PCI network cards based on the RTL8139 chips. -config BR2_PACKAGE_KMOD_NET_AIRO +config PACKAGE_KMOD_NET_AIRO prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help This is the standard Linux driver to support Cisco/Aironet ISA and @@ -490,18 +492,18 @@ config BR2_PACKAGE_KMOD_NET_AIRO and Cisco proprietary API, so both the Linux Wireless Tools and the Cisco Linux utilities can be used to configure the card. -config BR2_PACKAGE_KMOD_NET_E100 +config PACKAGE_KMOD_NET_E100 prompt "kmod-net-e100..................... Intel(R) PRO/100+ cards kernel support" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help Intel(R) PRO/100+ cards kernel support -config BR2_PACKAGE_KMOD_NET_HERMES +config PACKAGE_KMOD_NET_HERMES prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help A driver for 802.11b wireless cards based based on the "Hermes" or @@ -514,11 +516,11 @@ config BR2_PACKAGE_KMOD_NET_HERMES MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. -config BR2_PACKAGE_KMOD_NET_HERMES_PCI +config PACKAGE_KMOD_NET_HERMES_PCI prompt "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support" tristate default m - depends BR2_PACKAGE_KMOD_NET_HERMES + depends PACKAGE_KMOD_NET_HERMES help Enable support for PCI and mini-PCI 802.11b wireless NICs based on the Prism 2.5 chipset. These are true PCI cards, not the 802.11b @@ -526,11 +528,11 @@ config BR2_PACKAGE_KMOD_NET_HERMES_PCI common. Some of the built-in wireless adaptors in laptops are of this variety. -config BR2_PACKAGE_KMOD_NET_HERMES_PLX +config PACKAGE_KMOD_NET_HERMES_PLX prompt "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support" tristate default m - depends BR2_PACKAGE_KMOD_NET_HERMES + depends PACKAGE_KMOD_NET_HERMES help Enable support for PCMCIA cards supported by the "Hermes" (aka orinoco_cs) driver when used in PLX9052 based PCI adaptors. These @@ -539,20 +541,20 @@ config BR2_PACKAGE_KMOD_NET_HERMES_PLX 802.11b PCMCIA cards can be used in desktop machines. The Netgear MA301 is such an adaptor. -config BR2_PACKAGE_KMOD_NET_NATSEMI +config PACKAGE_KMOD_NET_NATSEMI prompt "kmod-net-natsemi.................. National Semiconductor DP8381x series PCI Ethernet kernel support" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help This driver is for the National Semiconductor DP83810 series, which is used in cards from PureData, NetGear, Linksys and others, including the 83815 chip. -config BR2_PACKAGE_KMOD_NET_PRISM54 +config PACKAGE_KMOD_NET_PRISM54 prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM default m help Enable PCI and Cardbus support for the following chipset based cards: @@ -591,135 +593,135 @@ config BR2_PACKAGE_KMOD_NET_PRISM54 endmenu menu "PCMCIA/CardBus support" - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM -config BR2_PACKAGE_KMOD_PCMCIA_CORE +config PACKAGE_KMOD_PCMCIA_CORE prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support" - depends BR2_LINUX_PCMCIA_SUPPORT + depends LINUX_PCMCIA_SUPPORT tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM default m -config BR2_PACKAGE_KMOD_PCMCIA_SERIAL +config PACKAGE_KMOD_PCMCIA_SERIAL prompt "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support" tristate default m - depends BR2_PACKAGE_KMOD_PCMCIA_CORE + depends PACKAGE_KMOD_PCMCIA_CORE endmenu menu "USB support" -config BR2_PACKAGE_KMOD_USB +config PACKAGE_KMOD_USB prompt "kmod-usb-core..................... USB support" tristate - default n if BR2_LINUX_2_4_AR531X + default n if LINUX_2_4_AR531X default m -config BR2_PACKAGE_KMOD_USB_UHCI +config PACKAGE_KMOD_USB_UHCI prompt "kmod-usb-uhci................... Support for UHCI controllers" tristate - default n if BR2_LINUX_2_6_AU1000 - depends BR2_PACKAGE_KMOD_USB - select BR2_PACKAGE_KMOD_USB_CONTROLLER + default n if LINUX_2_6_AU1000 + depends PACKAGE_KMOD_USB + select PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB_OHCI +config PACKAGE_KMOD_USB_OHCI prompt "kmod-usb-ohci................... Support for OHCI controllers" tristate default m - depends BR2_PACKAGE_KMOD_USB - select BR2_PACKAGE_KMOD_USB_CONTROLLER + depends PACKAGE_KMOD_USB + select PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB2 +config PACKAGE_KMOD_USB2 prompt "kmod-usb2....................... Support for USB 2.0 controllers" tristate - default n if BR2_LINUX_2_6_AU1000 - depends BR2_PACKAGE_KMOD_USB - select BR2_PACKAGE_KMOD_USB_CONTROLLER + default n if LINUX_2_6_AU1000 + depends PACKAGE_KMOD_USB + select PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB_CONTROLLER +config PACKAGE_KMOD_USB_CONTROLLER tristate - depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI || BR2_PACKAGE_KMOD_USB2 + depends on PACKAGE_KMOD_USB_UHCI || PACKAGE_KMOD_USB_OHCI || PACKAGE_KMOD_USB2 default n -config BR2_PACKAGE_KMOD_USB_ACM +config PACKAGE_KMOD_USB_ACM prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers" tristate default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER + depends PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB_AUDIO +config PACKAGE_KMOD_USB_AUDIO prompt "kmod-usb-audio.................... Support for USB soundcards" tristate default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER - select BR2_PACKAGE_KMOD_SOUNDCORE + depends PACKAGE_KMOD_USB_CONTROLLER + select PACKAGE_KMOD_SOUNDCORE -config BR2_PACKAGE_KMOD_USB_PRINTER +config PACKAGE_KMOD_USB_PRINTER prompt "kmod-usb-printer.................. Support for USB printers" tristate default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER + depends PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB_SERIAL +config PACKAGE_KMOD_USB_SERIAL prompt "kmod-usb-serial................... Support for USB-to-serial converters" tristate default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER + depends PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB_SERIAL_BELKIN +config PACKAGE_KMOD_USB_SERIAL_BELKIN prompt "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters" tristate default m - depends BR2_PACKAGE_KMOD_USB_SERIAL + depends PACKAGE_KMOD_USB_SERIAL -config BR2_PACKAGE_KMOD_USB_SERIAL_FTDI +config PACKAGE_KMOD_USB_SERIAL_FTDI prompt "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converterr" tristate default m - depends BR2_PACKAGE_KMOD_USB_SERIAL + depends PACKAGE_KMOD_USB_SERIAL -config BR2_PACKAGE_KMOD_USB_SERIAL_MCT_U232 +config PACKAGE_KMOD_USB_SERIAL_MCT_U232 prompt "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters" tristate default m - depends BR2_PACKAGE_KMOD_USB_SERIAL + depends PACKAGE_KMOD_USB_SERIAL -config BR2_PACKAGE_KMOD_USB_SERIAL_PL2303 +config PACKAGE_KMOD_USB_SERIAL_PL2303 prompt "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters" tristate default m - depends BR2_PACKAGE_KMOD_USB_SERIAL + depends PACKAGE_KMOD_USB_SERIAL -config BR2_PACKAGE_KMOD_USB_SERIAL_VISOR +config PACKAGE_KMOD_USB_SERIAL_VISOR prompt "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver" tristate default m - depends BR2_PACKAGE_KMOD_USB_SERIAL + depends PACKAGE_KMOD_USB_SERIAL -config BR2_PACKAGE_KMOD_USB_STORAGE +config PACKAGE_KMOD_USB_STORAGE prompt "kmod-usb-storage.................. Support for USB storage devices" tristate default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER + depends PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB_ATM +config PACKAGE_KMOD_USB_ATM prompt "kmod-usb-atm...................... Support for USB ATM devices" tristate default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER + depends PACKAGE_KMOD_USB_CONTROLLER -config BR2_PACKAGE_KMOD_USB_ATM_SPEEDTOUCH +config PACKAGE_KMOD_USB_ATM_SPEEDTOUCH prompt "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem" tristate default m - depends BR2_PACKAGE_KMOD_USB_ATM + depends PACKAGE_KMOD_USB_ATM endmenu menu "Misc. devices support" -config BR2_PACKAGE_KMOD_AX25 +config PACKAGE_KMOD_AX25 prompt "kmod-ax25......................... AX25 support" tristate default m @@ -728,33 +730,33 @@ config BR2_PACKAGE_KMOD_AX25 This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss) -config BR2_PACKAGE_KMOD_BLUETOOTH +config PACKAGE_KMOD_BLUETOOTH prompt "kmod-bluetooth.................... Bluetooth drivers and network stack" tristate default m - default n if BR2_LINUX_2_4_AR531X + default n if LINUX_2_4_AR531X help Bluetooth drivers and network stack -config BR2_PACKAGE_KMOD_LP +config PACKAGE_KMOD_LP prompt "kmod-lp........................... Parallel port and lp support" tristate default m help Kernel modules for line printer and parallel port support -config BR2_PACKAGE_KMOD_SOFTDOG +config PACKAGE_KMOD_SOFTDOG prompt "kmod-softdog...................... Software watchdog" tristate default m help Kernel modules for software watchdog driver -config BR2_PACKAGE_KMOD_WD1100 +config PACKAGE_KMOD_WD1100 prompt "kmod-wd1100....................... Soekris net4801 watchdog" tristate default y - depends BR2_LINUX_2_4_X86 + depends LINUX_2_4_X86 help Driver for the NatSemi SC1x00 series Watchdog found on Soekris net4801 boards diff --git a/openwrt/target/linux/ar7-2.4/Config.in b/openwrt/target/linux/ar7-2.4/Config.in index 9d1fe7b81393..57d06c01b579 100644 --- a/openwrt/target/linux/ar7-2.4/Config.in +++ b/openwrt/target/linux/ar7-2.4/Config.in @@ -1,27 +1,27 @@ -config BR2_PACKAGE_KMOD_CPMAC +config PACKAGE_KMOD_CPMAC prompt "kmod-cpmac........................ AR7 CPMAC Network Driver" tristate default y - depends BR2_LINUX_2_4_AR7 + depends LINUX_2_4_AR7 help Driver for the AR7 CPMAC network chip -config BR2_PACKAGE_KMOD_SANGAM_ATM_A +config PACKAGE_KMOD_SANGAM_ATM_A prompt "kmod-sangam-atm-annex-a........... AR7 Sangam ADSL Driver (Annex A)" tristate default m - depends BR2_LINUX_2_4_AR7 - select BR2_PACKAGE_KMOD_ATM + depends LINUX_2_4_AR7 + select PACKAGE_KMOD_ATM help ATM driver for the Sangam ADSL chip on AR7 Annex A version -config BR2_PACKAGE_KMOD_SANGAM_ATM_B +config PACKAGE_KMOD_SANGAM_ATM_B prompt "kmod-sangam-atm-annex-b........... AR7 Sangam ADSL Driver (Annex B)" tristate default y - depends BR2_LINUX_2_4_AR7 - select BR2_PACKAGE_KMOD_ATM + depends LINUX_2_4_AR7 + select PACKAGE_KMOD_ATM help ATM driver for the Sangam ADSL chip on AR7 Annex B version diff --git a/openwrt/target/linux/aruba-2.6/Config.in b/openwrt/target/linux/aruba-2.6/Config.in index c1fab56464e0..b66e8f65519a 100644 --- a/openwrt/target/linux/aruba-2.6/Config.in +++ b/openwrt/target/linux/aruba-2.6/Config.in @@ -1,4 +1,4 @@ -config BR2_ARUBA_RAMDISK +config ARUBA_RAMDISK prompt "ramdisk support" - depends BR2_LINUX_2_6_ARUBA + depends LINUX_2_6_ARUBA bool diff --git a/openwrt/target/linux/aruba-2.6/Makefile b/openwrt/target/linux/aruba-2.6/Makefile index 24330c08f1db..b5b220d0f2cb 100644 --- a/openwrt/target/linux/aruba-2.6/Makefile +++ b/openwrt/target/linux/aruba-2.6/Makefile @@ -14,7 +14,7 @@ include ../kernel.mk $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked [ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE) [ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE) -ifeq ($(BR2_ARUBA_RAMDISK),y) +ifeq ($(CONFIG_ARUBA_RAMDISK),y) @$(CP) config-ramdisk $(LINUX_DIR)/.config else @$(CP) config $(LINUX_DIR)/.config diff --git a/openwrt/target/linux/brcm-2.4/Config.in b/openwrt/target/linux/brcm-2.4/Config.in index c344a97e816b..181014f7b3e9 100644 --- a/openwrt/target/linux/brcm-2.4/Config.in +++ b/openwrt/target/linux/brcm-2.4/Config.in @@ -1,15 +1,15 @@ -config BR2_PACKAGE_KMOD_BRCM_WL +config PACKAGE_KMOD_BRCM_WL prompt "kmod-brcm-wl...................... Broadcom Wireless Network Driver" tristate - depends BR2_LINUX_2_4_BRCM + depends LINUX_2_4_BRCM default y help Proprietary driver for Broadcom Wireless chipsets -config BR2_PACKAGE_KMOD_BRCM_WL2 +config PACKAGE_KMOD_BRCM_WL2 prompt "kmod-brcm-wl2..................... Broadcom Wireless Network Driver (new)" tristate - depends BR2_LINUX_2_4_BRCM + depends LINUX_2_4_BRCM default m help Proprietary driver for Broadcom Wireless chipsets diff --git a/openwrt/target/linux/image/Makefile b/openwrt/target/linux/image/Makefile index af7cd0e8d575..ce807b302799 100644 --- a/openwrt/target/linux/image/Makefile +++ b/openwrt/target/linux/image/Makefile @@ -2,15 +2,15 @@ include $(TOPDIR)/rules.mk KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD) -ifeq ($(BR2_TARGET_ROOTFS_JFFS2),y) +ifeq ($(CONFIG_TARGET_ROOTFS_JFFS2),y) include ./jffs2.mk endif -ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_LZMA),y) +ifeq ($(CONFIG_TARGET_ROOTFS_SQUASHFS_LZMA),y) include ./squashfs.mk endif -ifeq ($(BR2_TARGET_ROOTFS_TGZ),y) +ifeq ($(CONFIG_TARGET_ROOTFS_TGZ),y) include ./tgz.mk endif diff --git a/openwrt/target/linux/image/aruba/Makefile b/openwrt/target/linux/image/aruba/Makefile index a2cceaf0c1cf..0ddde20266c7 100644 --- a/openwrt/target/linux/image/aruba/Makefile +++ b/openwrt/target/linux/image/aruba/Makefile @@ -36,7 +36,7 @@ ifeq ($(FS),jffs2-4MB) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari: $(KDIR)/loader.elf ./addVersion -n ArubaOS $(KDIR)/loader.elf $@ version -ifneq ($(BR2_ARUBA_RAMDISK),y) +ifneq ($(CONFIG_ARUBA_RAMDISK),y) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari $(KDIR)/root.$(FS) @dd if=$< of=$@.tmp bs=655360 conv=sync @cat $(KDIR)/root.$(FS) >> $@.tmp diff --git a/openwrt/target/linux/image/jffs2.mk b/openwrt/target/linux/image/jffs2.mk index 1b0c3a778f39..7df3aedbcf56 100644 --- a/openwrt/target/linux/image/jffs2.mk +++ b/openwrt/target/linux/image/jffs2.mk @@ -1,4 +1,4 @@ -ifneq ($(BR2_mips),y) +ifneq ($(CONFIG_mips),y) JFFS2OPTS := --pad --little-endian --squash else JFFS2OPTS := --pad --big-endian --squash diff --git a/openwrt/target/linux/package/Makefile b/openwrt/target/linux/package/Makefile index 45211c1c8b04..792fb7bd6749 100644 --- a/openwrt/target/linux/package/Makefile +++ b/openwrt/target/linux/package/Makefile @@ -3,22 +3,22 @@ include $(TOPDIR)/rules.mk include ../rules.mk package-y += base-files -package-$(BR2_PACKAGE_KMOD_ALSA) += alsa -package-$(BR2_PACKAGE_KMOD_FUSE) += fuse -package-$(BR2_PACKAGE_KMOD_HOSTAP) += hostap -package-$(BR2_PACKAGE_KMOD_BCM43XX_STANDALONE) += bcm43xx-standalone -package-$(BR2_PACKAGE_KMOD_IEEE80211_DSCAPE) += ieee80211-dscape -package-$(BR2_PACKAGE_KMOD_MADWIFI) += madwifi -package-$(BR2_PACKAGE_KMOD_MADWIFI_OLD) += madwifi-old -package-$(BR2_PACKAGE_KMOD_MINI_FO) += mini_fo -package-$(BR2_PACKAGE_KMOD_OPENSWAN) += openswan -package-$(BR2_PACKAGE_KMOD_SHFS) += shfs -package-$(BR2_PACKAGE_KMOD_SPCA5XX) += spca5xx -package-$(BR2_PACKAGE_KMOD_SWITCH) += switch -package-$(BR2_PACKAGE_KMOD_UEAGLE_ATM) += ueagle-atm -package-$(BR2_PACKAGE_KMOD_DIAG) += diag -package-$(BR2_PACKAGE_KMOD_WLCOMPAT) += wlcompat -package-$(BR2_PACKAGE_KMOD_ZD1211) += zd1211 +package-$(CONFIG_PACKAGE_KMOD_ALSA) += alsa +package-$(CONFIG_PACKAGE_KMOD_FUSE) += fuse +package-$(CONFIG_PACKAGE_KMOD_HOSTAP) += hostap +package-$(CONFIG_PACKAGE_KMOD_BCM43XX_STANDALONE) += bcm43xx-standalone +package-$(CONFIG_PACKAGE_KMOD_IEEE80211_DSCAPE) += ieee80211-dscape +package-$(CONFIG_PACKAGE_KMOD_MADWIFI) += madwifi +package-$(CONFIG_PACKAGE_KMOD_MADWIFI_OLD) += madwifi-old +package-$(CONFIG_PACKAGE_KMOD_MINI_FO) += mini_fo +package-$(CONFIG_PACKAGE_KMOD_OPENSWAN) += openswan +package-$(CONFIG_PACKAGE_KMOD_SHFS) += shfs +package-$(CONFIG_PACKAGE_KMOD_SPCA5XX) += spca5xx +package-$(CONFIG_PACKAGE_KMOD_SWITCH) += switch +package-$(CONFIG_PACKAGE_KMOD_UEAGLE_ATM) += ueagle-atm +package-$(CONFIG_PACKAGE_KMOD_DIAG) += diag +package-$(CONFIG_PACKAGE_KMOD_WLCOMPAT) += wlcompat +package-$(CONFIG_PACKAGE_KMOD_ZD1211) += zd1211 bcm43xx-standalone-compile: ieee80211-dscape-compile wlcompat-compile: base-files-compile diff --git a/openwrt/target/linux/package/alsa/Config.in b/openwrt/target/linux/package/alsa/Config.in index df4da0b7d1dc..55d9abd1c474 100644 --- a/openwrt/target/linux/package/alsa/Config.in +++ b/openwrt/target/linux/package/alsa/Config.in @@ -1,9 +1,9 @@ -config BR2_PACKAGE_KMOD_ALSA +config PACKAGE_KMOD_ALSA prompt "kmod-alsa......................... Alsa Sound Drivers" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_X86 || BR2_LINUX_2_6_BRCM - depends BR2_PACKAGE_KMOD_USB_CONTROLLER - select BR2_PACKAGE_KMOD_SOUNDCORE - default m if CONFIG_DEVEL + depends LINUX_2_4_X86 || LINUX_2_4_BRCM || LINUX_2_6_X86 || LINUX_2_6_BRCM + depends PACKAGE_KMOD_USB_CONTROLLER + select PACKAGE_KMOD_SOUNDCORE + default m if DEVEL help Alsa Drivers for USB Soundcards diff --git a/openwrt/target/linux/package/bcm43xx-standalone/Config.in b/openwrt/target/linux/package/bcm43xx-standalone/Config.in index 5e15f8121c33..84a4702cf2c2 100644 --- a/openwrt/target/linux/package/bcm43xx-standalone/Config.in +++ b/openwrt/target/linux/package/bcm43xx-standalone/Config.in @@ -1,8 +1,8 @@ -config BR2_PACKAGE_KMOD_BCM43XX_STANDALONE +config PACKAGE_KMOD_BCM43XX_STANDALONE prompt "kmod-bcm43xx-standalone............... Free Broadcom 43xx wireless driver (devicescape stack)" tristate - depends BR2_LINUX_2_6_BRCM - select BR2_PACKAGE_KMOD_IEEE80211_DSCAPE + depends LINUX_2_6_BRCM + select PACKAGE_KMOD_IEEE80211_DSCAPE default n help Free driver for the Broadcom 43xx wireless chipset diff --git a/openwrt/target/linux/package/diag/Config.in b/openwrt/target/linux/package/diag/Config.in index 70f726c5b683..80cba50cf2da 100644 --- a/openwrt/target/linux/package/diag/Config.in +++ b/openwrt/target/linux/package/diag/Config.in @@ -1,7 +1,7 @@ -config BR2_PACKAGE_KMOD_DIAG +config PACKAGE_KMOD_DIAG prompt "kmod-diag......................... Driver for router LEDs and Buttons" tristate - depends BR2_LINUX_2_4_BRCM + depends LINUX_2_4_BRCM default y help Driver for router LEDs and Buttons diff --git a/openwrt/target/linux/package/fuse/Config.in b/openwrt/target/linux/package/fuse/Config.in index 8fbb34c079e1..d51229522b09 100644 --- a/openwrt/target/linux/package/fuse/Config.in +++ b/openwrt/target/linux/package/fuse/Config.in @@ -1,7 +1,7 @@ -config BR2_PACKAGE_KMOD_FUSE +config PACKAGE_KMOD_FUSE prompt "kmod-fuse......................... FUSE kernel module" tristate - default m if CONFIG_DEVEL + default m if DEVEL help With FUSE it is possible to implement a fully functional filesystem in a userspace program. diff --git a/openwrt/target/linux/package/hostap/Config.in b/openwrt/target/linux/package/hostap/Config.in index 767b4593163f..39b49d4c4bd2 100644 --- a/openwrt/target/linux/package/hostap/Config.in +++ b/openwrt/target/linux/package/hostap/Config.in @@ -1,8 +1,8 @@ -config BR2_PACKAGE_KMOD_HOSTAP +config PACKAGE_KMOD_HOSTAP prompt "kmod-hostap....................... Host AP support for Prism2/2.5/3 IEEE 802.11b" tristate - depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM - default m if CONFIG_DEVEL + depends LINUX_2_4_X86 || LINUX_2_4_BRCM + default m if DEVEL help A driver for 802.11b wireless cards based on Intersil Prism2/2.5/3 chipset. This driver supports so called Host AP mode that allows @@ -14,11 +14,11 @@ config BR2_PACKAGE_KMOD_HOSTAP http://hostap.epitest.fi/ -config BR2_PACKAGE_KMOD_HOSTAP_PCI +config PACKAGE_KMOD_HOSTAP_PCI prompt "kmod-hostap-pci................. Host AP driver for Prism2.5 PCI adaptors" tristate - default m if CONFIG_DEVEL - depends BR2_PACKAGE_KMOD_HOSTAP + default m if DEVEL + depends PACKAGE_KMOD_HOSTAP help Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this driver and its help text includes more information about the Host AP @@ -26,11 +26,11 @@ config BR2_PACKAGE_KMOD_HOSTAP_PCI http://hostap.epitest.fi/ -config BR2_PACKAGE_KMOD_HOSTAP_PLX +config PACKAGE_KMOD_HOSTAP_PLX prompt "kmod-hostap-plx................. Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors" tristate - default m if CONFIG_DEVEL - depends BR2_PACKAGE_KMOD_HOSTAP + default m if DEVEL + depends PACKAGE_KMOD_HOSTAP help Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this driver and its help text includes more information about the Host AP diff --git a/openwrt/target/linux/package/ieee80211-dscape/Config.in b/openwrt/target/linux/package/ieee80211-dscape/Config.in index a440ee260799..d747ed2fbabc 100644 --- a/openwrt/target/linux/package/ieee80211-dscape/Config.in +++ b/openwrt/target/linux/package/ieee80211-dscape/Config.in @@ -1,8 +1,8 @@ -config BR2_PACKAGE_KMOD_IEEE80211_DSCAPE +config PACKAGE_KMOD_IEEE80211_DSCAPE prompt "kmod-ieee80211-dscape............. IEEE 802.11 stack (devicescape)" tristate default n - depends BR2_LINUX_2_6_BRCM || BR2_LINUX_2_6_X86 + depends LINUX_2_6_BRCM || LINUX_2_6_X86 help IEEE 802.11 stack (devicescape) diff --git a/openwrt/target/linux/package/madwifi-old/Config.in b/openwrt/target/linux/package/madwifi-old/Config.in index 115ce03f607f..ec0385540dd9 100644 --- a/openwrt/target/linux/package/madwifi-old/Config.in +++ b/openwrt/target/linux/package/madwifi-old/Config.in @@ -1,7 +1,7 @@ -config BR2_PACKAGE_KMOD_MADWIFI_OLD +config PACKAGE_KMOD_MADWIFI_OLD prompt "kmod-madwifi-old.................. (old) Atheros Wifi driver" tristate - default m if CONFIG_DEVEL + default m if DEVEL default n help Madwifi-old driver for Atheros wireless adapters diff --git a/openwrt/target/linux/package/madwifi-old/Makefile b/openwrt/target/linux/package/madwifi-old/Makefile index 25c64df50a30..7d369722aae6 100644 --- a/openwrt/target/linux/package/madwifi-old/Makefile +++ b/openwrt/target/linux/package/madwifi-old/Makefile @@ -26,10 +26,10 @@ endif BUS := PCI -ifneq ($(BR2_LINUX_2_4_AR531X),) +ifneq ($(CONFIG_LINUX_2_4_AR531X),) BUS := AHB endif -# ifneq ($(BR2_LINUX_2_6_ARUBA),) +# ifneq ($(CONFIG_LINUX_2_6_ARUBA),) # BUS := PCI AHB # no suitable HAL for AHB yet. # endif diff --git a/openwrt/target/linux/package/madwifi/Config.in b/openwrt/target/linux/package/madwifi/Config.in index b554e672fd34..6eda342f8184 100644 --- a/openwrt/target/linux/package/madwifi/Config.in +++ b/openwrt/target/linux/package/madwifi/Config.in @@ -1,8 +1,8 @@ -config BR2_PACKAGE_KMOD_MADWIFI +config PACKAGE_KMOD_MADWIFI prompt "kmod-madwifi...................... Atheros Wifi driver" tristate - default y if BR2_LINUX_2_6_BRCM || BR2_LINUX_2_6_ARUBA || BR2_LINUX_2_4_AR531X - default m if CONFIG_DEVEL + default y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X + default m if DEVEL default n help Driver for Atheros 802.11a/b/g MiniPCI cards diff --git a/openwrt/target/linux/package/madwifi/Makefile b/openwrt/target/linux/package/madwifi/Makefile index fcdac9097fc0..d42372b52ecf 100644 --- a/openwrt/target/linux/package/madwifi/Makefile +++ b/openwrt/target/linux/package/madwifi/Makefile @@ -26,10 +26,10 @@ endif BUS := PCI -ifneq ($(BR2_LINUX_2_4_AR531X),) +ifneq ($(CONFIG_LINUX_2_4_AR531X),) BUS := AHB endif -ifneq ($(BR2_LINUX_2_6_ARUBA),) +ifneq ($(CONFIG_LINUX_2_6_ARUBA),) BUS := PCI AHB # no suitable HAL for AHB yet. endif diff --git a/openwrt/target/linux/package/mini_fo/Config.in b/openwrt/target/linux/package/mini_fo/Config.in index a92ff9785a05..a280ff56a8d8 100644 --- a/openwrt/target/linux/package/mini_fo/Config.in +++ b/openwrt/target/linux/package/mini_fo/Config.in @@ -1,6 +1,6 @@ -config BR2_PACKAGE_KMOD_MINI_FO +config PACKAGE_KMOD_MINI_FO prompt "kmod-mini_fo...................... mini fanout overlay file system" tristate - default m if CONFIG_DEVEL + default m if DEVEL help The mini fanout overlay file system. diff --git a/openwrt/target/linux/package/openswan/Config.in b/openwrt/target/linux/package/openswan/Config.in index 59a943f8e46b..faf0f8f4a61e 100644 --- a/openwrt/target/linux/package/openswan/Config.in +++ b/openwrt/target/linux/package/openswan/Config.in @@ -1,7 +1,7 @@ -config BR2_PACKAGE_KMOD_OPENSWAN +config PACKAGE_KMOD_OPENSWAN prompt "kmod-openswan..................... Openswan kernel module" tristate - default m if CONFIG_DEVEL + default m if DEVEL help Openswan is an implementation of IPsec for Linux. diff --git a/openwrt/target/linux/package/shfs/Config.in b/openwrt/target/linux/package/shfs/Config.in index 61bd54b5e59b..71cc327073a0 100644 --- a/openwrt/target/linux/package/shfs/Config.in +++ b/openwrt/target/linux/package/shfs/Config.in @@ -1,7 +1,7 @@ -config BR2_PACKAGE_KMOD_SHFS +config PACKAGE_KMOD_SHFS prompt "kmod-shfs......................... Shell FileSystem kernel module (ShFS) kernel module" tristate - default m if CONFIG_DEVEL + default m if DEVEL help ShFS is a simple and easy to use Linux kernel module which allows you to mount remote filesystems using a plain shell diff --git a/openwrt/target/linux/package/spca5xx/Config.in b/openwrt/target/linux/package/spca5xx/Config.in index 6d504823f1c9..729e6b00944c 100644 --- a/openwrt/target/linux/package/spca5xx/Config.in +++ b/openwrt/target/linux/package/spca5xx/Config.in @@ -1,7 +1,7 @@ -config BR2_PACKAGE_KMOD_SPCA5XX +config PACKAGE_KMOD_SPCA5XX prompt "kmod-spca5xx...................... Kernel driver for SPCA5XX based USB cameras" tristate - default m if CONFIG_DEVEL + default m if DEVEL help Kernel driver for SPCA5XX based USB cameras diff --git a/openwrt/target/linux/package/switch/Config.in b/openwrt/target/linux/package/switch/Config.in index 407d5deb6893..0ff2aa1aba96 100644 --- a/openwrt/target/linux/package/switch/Config.in +++ b/openwrt/target/linux/package/switch/Config.in @@ -1,8 +1,8 @@ -config BR2_PACKAGE_KMOD_SWITCH +config PACKAGE_KMOD_SWITCH prompt "kmod-switch....................... Kernel driver for ROBO and ADMTEK SWITCH" tristate - default y if BR2_LINUX_2_6_BRCM || BR2_LINUX_2_4_BRCM - default m if CONFIG_DEVEL + default y if LINUX_2_6_BRCM || LINUX_2_4_BRCM + default m if DEVEL default n help Kernel driver for ROBO and ADMTEK switches. diff --git a/openwrt/target/linux/package/ueagle-atm/Config.in b/openwrt/target/linux/package/ueagle-atm/Config.in index 17b619cef810..c92fc2f7248d 100644 --- a/openwrt/target/linux/package/ueagle-atm/Config.in +++ b/openwrt/target/linux/package/ueagle-atm/Config.in @@ -1,8 +1,8 @@ -config BR2_PACKAGE_KMOD_UEAGLE_ATM +config PACKAGE_KMOD_UEAGLE_ATM prompt "kmod-ueagle-atm.................... Kernel driver for Eagle 8051 based USB ADSL modems" tristate - depends BR2_LINUX_2_6_BRCM - default m if CONFIG_DEVEL + depends LINUX_2_6_BRCM + default m if DEVEL help Kernel driver for Eagle 8051 USB ADSL modems diff --git a/openwrt/target/linux/package/wlcompat/Config.in b/openwrt/target/linux/package/wlcompat/Config.in index 1e5f5e79e073..904d1e664595 100644 --- a/openwrt/target/linux/package/wlcompat/Config.in +++ b/openwrt/target/linux/package/wlcompat/Config.in @@ -1,17 +1,17 @@ -config BR2_PACKAGE_KMOD_WLCOMPAT +config PACKAGE_KMOD_WLCOMPAT prompt "kmod-wlcompat..................... Wrapper providing Wireless Extensions for Broadcom wl module" tristate default y - depends BR2_PACKAGE_KMOD_BRCM_WL || BR2_PACKAGE_KMOD_BRCM_WL2 + depends PACKAGE_KMOD_BRCM_WL || PACKAGE_KMOD_BRCM_WL2 help A wrapper module, that provides Wireless Extension support for the proprietary Broadcom wl module. -config BR2_PACKAGE_KMOD_WLCOMPAT_DEBUG +config PACKAGE_KMOD_WLCOMPAT_DEBUG prompt "kmod-wlcompat-debug............... Wrapper providing Wireless Extensions for Broadcom wl module (debug)" tristate default m - depends BR2_PACKAGE_KMOD_BRCM_WL || BR2_PACKAGE_KMOD_BRCM_WL2 + depends PACKAGE_KMOD_BRCM_WL || PACKAGE_KMOD_BRCM_WL2 help A wrapper module, that provides Wireless Extension support for the proprietary Broadcom wl module. (debug version) diff --git a/openwrt/target/linux/package/zd1211/Config.in b/openwrt/target/linux/package/zd1211/Config.in index 2852c84e558f..cadfa4f5dd8a 100644 --- a/openwrt/target/linux/package/zd1211/Config.in +++ b/openwrt/target/linux/package/zd1211/Config.in @@ -1,8 +1,8 @@ -config BR2_PACKAGE_KMOD_ZD1211 +config PACKAGE_KMOD_ZD1211 prompt "kmod-zd12111...................... Driver for Zydas 1211 based devices" tristate - depends BR2_LINUX_2_6 - default m if CONFIG_DEVEL + depends LINUX_2_6 + default m if DEVEL help Linux driver for the ZyDAS ZD1211 802.11b/g USB-WLAN-Chip. Initially contributed by ZyDAS, this driver is actively maintained diff --git a/openwrt/target/linux/rules.mk b/openwrt/target/linux/rules.mk index 1ebe28b6ac5b..8490d110de8c 100644 --- a/openwrt/target/linux/rules.mk +++ b/openwrt/target/linux/rules.mk @@ -54,10 +54,10 @@ PKG_$(1) := $(PACKAGE_DIR)/kmod-$(2)_$(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)_ I_$(1) := $(KMOD_BUILD_DIR)/ipkg/$(2) ifeq ($$(KDEPEND_$(1)),m) -ifneq ($(BR2_PACKAGE_KMOD_$(1)),) +ifneq ($(CONFIG_PACKAGE_KMOD_$(1)),) TARGETS += $$(PKG_$(1)) endif -ifeq ($(BR2_PACKAGE_KMOD_$(1)),y) +ifeq ($(CONFIG_PACKAGE_KMOD_$(1)),y) INSTALL_TARGETS += $$(PKG_$(1)) endif endif diff --git a/openwrt/target/sdk/Config.in b/openwrt/target/sdk/Config.in index f70810ba02d2..343352ad0500 100644 --- a/openwrt/target/sdk/Config.in +++ b/openwrt/target/sdk/Config.in @@ -1,6 +1,6 @@ -config BR2_PACKAGE_SDK +config PACKAGE_SDK bool "OpenWrt SDK" - default y if CONFIG_DEVEL + default y if DEVEL help Build an OpenWrt SDK. This is essentially a stripped-down version of the buildroot diff --git a/openwrt/target/sdk/Makefile b/openwrt/target/sdk/Makefile index 3f62aec1155f..cfcf8c5e058d 100644 --- a/openwrt/target/sdk/Makefile +++ b/openwrt/target/sdk/Makefile @@ -27,7 +27,7 @@ $(BIN_DIR)/$(SDK_NAME).tar.bz2: $(CP) ./files/README.SDK $(SDK_BUILD_DIR)/ $(CP) ./files/depend.mk $(SDK_BUILD_DIR)/package/ $(CP) $(TOPDIR)/package/rules.mk $(SDK_BUILD_DIR)/package/ - egrep '^BR2_(ARCH|WGET|STAGING|JLEVEL|LARGEFILE|TARGET_OPT)' $(TOPDIR)/.config > $(SDK_BUILD_DIR)/.config + egrep '^CONFIG_(ARCH|WGET|STAGING|JLEVEL|LARGEFILE|TARGET_OPT)' $(TOPDIR)/.config > $(SDK_BUILD_DIR)/.config find $(SDK_BUILD_DIR) -name .svn | xargs rm -rf find $(SDK_BUILD_DIR) -name CVS | xargs rm -rf (cd $(BUILD_DIR); \ diff --git a/openwrt/toolchain/binutils/Makefile b/openwrt/toolchain/binutils/Makefile index 1b205715e348..7d405664bb0f 100644 --- a/openwrt/toolchain/binutils/Makefile +++ b/openwrt/toolchain/binutils/Makefile @@ -5,7 +5,7 @@ include $(TOPDIR)/rules.mk # build binutils for use on the host system # ############################################################# -BINUTILS_VERSION:=$(strip $(subst ",, $(BR2_BINUTILS_VERSION))) +BINUTILS_VERSION:=$(strip $(subst ",, $(CONFIG_BINUTILS_VERSION))) #" BINUTILS_SITE:=http://www.fr.kernel.org/pub/linux/devel/binutils \ diff --git a/openwrt/toolchain/gcc/Makefile b/openwrt/toolchain/gcc/Makefile index 26e17ad61e28..cf60d7505033 100644 --- a/openwrt/toolchain/gcc/Makefile +++ b/openwrt/toolchain/gcc/Makefile @@ -37,10 +37,10 @@ GCC_STRIP_HOST_BINARIES:=true # ############################################################# -ifeq ($(BR2_INSTALL_LIBGCJ),y) +ifeq ($(CONFIG_INSTALL_LIBGCJ),y) TARGET_LANGUAGES:=c,c++,java else -ifeq ($(BR2_INSTALL_LIBSTDCPP),y) +ifeq ($(CONFIG_INSTALL_LIBSTDCPP),y) TARGET_LANGUAGES:=c,c++ else TARGET_LANGUAGES:=c @@ -71,7 +71,7 @@ $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked # We can dispense with the custom spec files, as well as libfloat for the arm case. # However, we still need a patch for arm. There's a similar patch for gcc 3.3.x # which needs to be integrated so we can kill of libfloat for good. -ifeq ($(BR2_SOFT_FLOAT),y) +ifeq ($(CONFIG_SOFT_FLOAT),y) ifeq ("$(strip $(ARCH))","arm") $(SCRIPT_DIR)/patch-kernel.sh $(GCC_DIR) ./$(GCC_VERSION) arm-softfloat.patch.conditional endif @@ -175,7 +175,7 @@ gcc-install: $(GCC_BUILD_DIR2)/.compiled # # Now for the ugly 3.3.x soft float hack... # -ifeq ($(BR2_SOFT_FLOAT),y) +ifeq ($(CONFIG_SOFT_FLOAT),y) ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.) # Make sure we have a soft float specs file for this arch if [ ! -f ./$(GCC_VERSION)/specs-$(ARCH)-soft-float ] ; then \ diff --git a/openwrt/toolchain/gdb/Config.in b/openwrt/toolchain/gdb/Config.in index 574a398bb8d0..f8560cbd907f 100644 --- a/openwrt/toolchain/gdb/Config.in +++ b/openwrt/toolchain/gdb/Config.in @@ -1,6 +1,6 @@ comment "Gdb Options" -config BR2_PACKAGE_GDB_CLIENT +config PACKAGE_GDB_CLIENT bool "Build gdb client for the Host" default n help diff --git a/openwrt/toolchain/uClibc/Makefile b/openwrt/toolchain/uClibc/Makefile index d77f554a12ba..19ab0326f648 100644 --- a/openwrt/toolchain/uClibc/Makefile +++ b/openwrt/toolchain/uClibc/Makefile @@ -6,10 +6,10 @@ include $(TOPDIR)/rules.mk # ############################################################# -ifeq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y) +ifeq ($(CONFIG_UCLIBC_VERSION_SNAPSHOT),y) # Be aware that this changes daily.... UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc -UCLIBC_SOURCE:=uClibc-$(strip $(subst ",, $(BR2_USE_UCLIBC_SNAPSHOT))).tar.bz2 +UCLIBC_SOURCE:=uClibc-$(strip $(subst ",, $(CONFIG_USE_UCLIBC_SNAPSHOT))).tar.bz2 #" UCLIBC_SITE:=http://www.uclibc.org/downloads/snapshots UCLIBC_VER:=PKG_VERSION:=0.${shell date +"%G%m%d"} @@ -50,13 +50,13 @@ $(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked $(CP) ./files/config.$(ARCH) $(UCLIBC_DIR)/.config $(SED) 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_HEADERS_DIR)\",g' \ $(UCLIBC_DIR)/.config -ifeq ($(BR2_LARGEFILE),y) +ifeq ($(CONFIG_LARGEFILE),y) $(SED) 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g' $(UCLIBC_DIR)/.config else $(SED) 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=n,g' $(UCLIBC_DIR)/.config endif $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.config -ifeq ($(BR2_SOFT_FLOAT),y) +ifeq ($(CONFIG_SOFT_FLOAT),y) $(SED) 's,.*HAS_FPU.*,HAS_FPU=n\nUCLIBC_HAS_FLOATS=y\nUCLIBC_HAS_SOFT_FLOAT=y,g' $(UCLIBC_DIR)/.config endif mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/include -- 2.30.2