From 7e8275c2f2bbb384e18af37066b8b2f32b7d092f Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Fri, 25 Sep 2015 09:36:12 +0800 Subject: [PATCH] drm/i915: set proper N/CTS in modeset When modeset occurs and the TMDS frequency is set to some speical values, the N/CTS need to be set manually if audio is playing. Signed-off-by: Libin Yang Reviewed-by: Jani Nikula Signed-off-by: Takashi Iwai --- drivers/gpu/drm/i915/intel_audio.c | 57 +++++++++++++++++++++++++----- include/drm/i915_component.h | 10 ++++++ 2 files changed, 58 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index c5922f902aaf..30f6859dcb36 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -128,6 +128,20 @@ static int audio_config_get_n(const struct drm_display_mode *mode, int rate) return 0; } +static uint32_t audio_config_setup_n_reg(int n, uint32_t val) +{ + int n_low, n_up; + uint32_t tmp = val; + + n_low = n & 0xfff; + n_up = (n >> 12) & 0xff; + tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK); + tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) | + (n_low << AUD_CONFIG_LOWER_N_SHIFT) | + AUD_CONFIG_N_PROG_ENABLE); + return tmp; +} + /* check whether N/CTS/M need be set manually */ static bool audio_rate_need_prog(struct intel_crtc *crtc, struct drm_display_mode *mode) @@ -262,9 +276,14 @@ static void hsw_audio_codec_enable(struct drm_connector *connector, struct drm_i915_private *dev_priv = connector->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); enum pipe pipe = intel_crtc->pipe; + struct i915_audio_component *acomp = dev_priv->audio_component; const uint8_t *eld = connector->eld; + struct intel_digital_port *intel_dig_port = + enc_to_dig_port(&encoder->base); + enum port port = intel_dig_port->port; uint32_t tmp; int len, i; + int n, rate; DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n", pipe_name(pipe), drm_eld_size(eld)); @@ -302,12 +321,29 @@ static void hsw_audio_codec_enable(struct drm_connector *connector, /* Enable timestamps */ tmp = I915_READ(HSW_AUD_CFG(pipe)); tmp &= ~AUD_CONFIG_N_VALUE_INDEX; - tmp &= ~AUD_CONFIG_N_PROG_ENABLE; tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK; if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT)) tmp |= AUD_CONFIG_N_VALUE_INDEX; else tmp |= audio_config_hdmi_pixel_clock(mode); + + tmp &= ~AUD_CONFIG_N_PROG_ENABLE; + if (audio_rate_need_prog(intel_crtc, mode)) { + if (!acomp) + rate = 0; + else if (port >= PORT_A && port <= PORT_E) + rate = acomp->aud_sample_rate[port]; + else { + DRM_ERROR("invalid port: %d\n", port); + rate = 0; + } + n = audio_config_get_n(mode, rate); + if (n != 0) + tmp = audio_config_setup_n_reg(n, tmp); + else + DRM_DEBUG_KMS("no suitable N value is found\n"); + } + I915_WRITE(HSW_AUD_CFG(pipe), tmp); mutex_unlock(&dev_priv->av_mutex); @@ -594,9 +630,10 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, struct intel_digital_port *intel_dig_port; struct intel_crtc *crtc; struct drm_display_mode *mode; + struct i915_audio_component *acomp = dev_priv->audio_component; enum pipe pipe = -1; u32 tmp; - int n_low, n_up, n; + int n; /* HSW, BDW SKL need this fix */ if (!IS_SKYLAKE(dev_priv) && @@ -630,6 +667,9 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, pipe_name(pipe), port_name(port)); mode = &crtc->config->base.adjusted_mode; + /* port must be valid now, otherwise the pipe will be invalid */ + acomp->aud_sample_rate[port] = rate; + /* 2. check whether to set the N/CTS/M manually or not */ if (!audio_rate_need_prog(crtc, mode)) { tmp = I915_READ(HSW_AUD_CFG(pipe)); @@ -649,15 +689,10 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, mutex_unlock(&dev_priv->av_mutex); return 0; } - n_low = n & 0xfff; - n_up = (n >> 12) & 0xff; - /* 4. set the N/CTS/M */ + /* 3. set the N/CTS/M */ tmp = I915_READ(HSW_AUD_CFG(pipe)); - tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK); - tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) | - (n_low << AUD_CONFIG_LOWER_N_SHIFT) | - AUD_CONFIG_N_PROG_ENABLE); + tmp = audio_config_setup_n_reg(n, tmp); I915_WRITE(HSW_AUD_CFG(pipe), tmp); mutex_unlock(&dev_priv->av_mutex); @@ -678,6 +713,7 @@ static int i915_audio_component_bind(struct device *i915_dev, { struct i915_audio_component *acomp = data; struct drm_i915_private *dev_priv = dev_to_i915(i915_dev); + int i; if (WARN_ON(acomp->ops || acomp->dev)) return -EEXIST; @@ -685,6 +721,9 @@ static int i915_audio_component_bind(struct device *i915_dev, drm_modeset_lock_all(dev_priv->dev); acomp->ops = &i915_audio_component_ops; acomp->dev = i915_dev; + BUILD_BUG_ON(MAX_PORTS != I915_MAX_PORTS); + for (i = 0; i < ARRAY_SIZE(acomp->aud_sample_rate); i++) + acomp->aud_sample_rate[i] = 0; dev_priv->audio_component = acomp; drm_modeset_unlock_all(dev_priv->dev); diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h index e6d35d7239c0..89dc7d6bc1cc 100644 --- a/include/drm/i915_component.h +++ b/include/drm/i915_component.h @@ -24,8 +24,18 @@ #ifndef _I915_COMPONENT_H_ #define _I915_COMPONENT_H_ +/* MAX_PORT is the number of port + * It must be sync with I915_MAX_PORTS defined i915_drv.h + * 5 should be enough as only HSW, BDW, SKL need such fix. + */ +#define MAX_PORTS 5 + struct i915_audio_component { struct device *dev; + /** + * @aud_sample_rate: the array of audio sample rate per port + */ + int aud_sample_rate[MAX_PORTS]; const struct i915_audio_component_ops { struct module *owner; -- 2.30.2