From 7df5659eefad9b6d457ccdee016bd78bd064cfc0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Jun 2011 11:45:16 +0000 Subject: [PATCH] serial/8250: Move UPIO_TSI to powerpc This iotype is only used by the legacy_serial code in powerpc, so the code should live there, rather than be compiled in for every 8250 driver. Signed-off-by: Arnd Bergmann Cc: Benjamin Herrenschmidt Cc: linuxppc-dev@lists.ozlabs.org Cc: Greg Kroah-Hartman Cc: linux-serial@vger.kernel.org Acked-by: David Daney Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/legacy_serial.c | 25 +++++++++++++++++++++++++ drivers/tty/serial/8250.c | 23 ----------------------- 2 files changed, 25 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 2b97b80d6d7d..c7b5afeecaf2 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,24 @@ static struct __initdata of_device_id legacy_serial_parents[] = { static unsigned int legacy_serial_count; static int legacy_serial_console = -1; +static unsigned int tsi_serial_in(struct uart_port *p, int offset) +{ + unsigned int tmp; + offset = offset << p->regshift; + if (offset == UART_IIR) { + tmp = readl(p->membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(p->membase + offset); +} + +static void tsi_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, p->membase + offset); +} + static int __init add_legacy_port(struct device_node *np, int want_index, int iotype, phys_addr_t base, phys_addr_t taddr, unsigned long irq, @@ -102,6 +121,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_ports[index].iobase = base; else legacy_serial_ports[index].mapbase = base; + legacy_serial_ports[index].iotype = iotype; legacy_serial_ports[index].uartclk = clock; legacy_serial_ports[index].irq = irq; @@ -112,6 +132,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0; legacy_serial_infos[index].irq_check_parent = irq_check_parent; + if (iotype == UPIO_TSI) { + legacy_serial_ports[index].serial_in = tsi_serial_in; + legacy_serial_ports[index].serial_out = tsi_serial_out; + } + printk(KERN_DEBUG "Found legacy serial port %d for %s\n", index, np->full_name); printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 7f50999eebc2..610b8e63710d 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -443,24 +443,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value) __raw_writel(value, p->membase + offset); } -static unsigned int tsi_serial_in(struct uart_port *p, int offset) -{ - unsigned int tmp; - offset = map_8250_in_reg(p, offset) << p->regshift; - if (offset == UART_IIR) { - tmp = readl(p->membase + (UART_IIR & ~3)); - return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ - } else - return readb(p->membase + offset); -} - -static void tsi_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - if (!((offset == UART_IER) && (value & UART_IER_UUE))) - writeb(value, p->membase + offset); -} - /* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */ static inline void dwapb_save_out_value(struct uart_port *p, int offset, int value) @@ -535,11 +517,6 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = au_serial_out; break; - case UPIO_TSI: - p->serial_in = tsi_serial_in; - p->serial_out = tsi_serial_out; - break; - case UPIO_DWAPB: p->serial_in = mem_serial_in; p->serial_out = dwapb_serial_out; -- 2.30.2