From 7cad446b887b6764afe8a6706508236bbd4998d8 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 22 Mar 2012 13:49:22 +0000 Subject: [PATCH] OMAP3: pandora: revise GPIO configuration Update pandora's GPIO setup code with these changes: - convert to gpiolib - set up dual voltage GPIOs to match supply of 1.8V by clearing VMODE1 - add GPIO_IO_PWRDNZ configuration for DM3730 variation of pandora (required to enable GPIO 126, 127, and 129 I/O cells in DM3730) - add wifi reset pulse as recommended by wifi chip's manufacturer - drop configuration of GPIOs that u-boot doesn't need Signed-off-by: Grazvydas Ignotas --- board/pandora/pandora.c | 54 +++++++++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 13 deletions(-) diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c index 5c77fad699..3a62e9d633 100644 --- a/board/pandora/pandora.c +++ b/board/pandora/pandora.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -45,6 +46,10 @@ DECLARE_GLOBAL_DATA_PTR; #define TWL4030_BB_CFG_BBSEL_3200MV (3 << 2) #define TWL4030_BB_CFG_BBISEL_500UA 2 +#define CONTROL_WKUP_CTRL 0x48002a5c +#define GPIO_IO_PWRDNZ (1 << 6) +#define PBIASLITEVMODE1 (1 << 8) + /* * Routine: board_init * Description: Early hardware init. @@ -60,29 +65,52 @@ int board_init(void) return 0; } +static void set_output_gpio(unsigned int gpio, int value) +{ + int ret; + + ret = gpio_request(gpio, ""); + if (ret != 0) { + printf("could not request GPIO %u\n", gpio); + return; + } + ret = gpio_direction_output(gpio, value); + if (ret != 0) + printf("could not set GPIO %u to %d\n", gpio, value); +} + /* * Routine: misc_init_r * Description: Configure board specific parts */ int misc_init_r(void) { - struct gpio *gpio1_base = (struct gpio *)OMAP34XX_GPIO1_BASE; - struct gpio *gpio4_base = (struct gpio *)OMAP34XX_GPIO4_BASE; - struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; - struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; + t2_t *t2_base = (t2_t *)T2_BASE; + u32 pbias_lite; twl4030_led_init(TWL4030_LED_LEDEN_LEDBON); - /* Configure GPIOs to output */ - writel(~(GPIO14 | GPIO15 | GPIO16 | GPIO23), &gpio1_base->oe); - writel(~GPIO22, &gpio4_base->oe); /* 118 */ - writel(~(GPIO0 | GPIO1 | GPIO28 | GPIO29 | GPIO30 | GPIO31), - &gpio5_base->oe); /* 128, 129, 156-159 */ - writel(~GPIO4, &gpio6_base->oe); /* 164 */ + /* set up dual-voltage GPIOs to 1.8V */ + pbias_lite = readl(&t2_base->pbias_lite); + pbias_lite &= ~PBIASLITEVMODE1; + pbias_lite |= PBIASLITEPWRDNZ1; + writel(pbias_lite, &t2_base->pbias_lite); + if (get_cpu_family() == CPU_OMAP36XX) + writel(readl(CONTROL_WKUP_CTRL) | GPIO_IO_PWRDNZ, + CONTROL_WKUP_CTRL); + + /* make sure audio and BT chips are in powerdown state */ + set_output_gpio(14, 0); + set_output_gpio(15, 0); + set_output_gpio(118, 0); + + /* enable USB supply */ + set_output_gpio(164, 1); - /* Set GPIOs */ - writel(GPIO28, &gpio5_base->setdataout); - writel(GPIO4, &gpio6_base->setdataout); + /* wifi needs a short pulse to enter powersave state */ + set_output_gpio(23, 1); + udelay(5000); + gpio_direction_output(23, 0); /* Enable battery backup capacitor (3.2V, 0.5mA charge current) */ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, -- 2.30.2