From 7c819de4389bf91878954f41e51a0003171217ff Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Sat, 2 Sep 2017 23:49:10 +0200 Subject: [PATCH] mlxsw: reg: Update RATR to support IP-in-IP tunnels So far, adjacencies have always been of type Ethernet (with value of 0), and thus there was no need to explicitly support RATR type. However to support IP-in-IP adjacencies, this type and a suite of IP-in-IP-specific attributes need to be added. Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 66 +++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 8736f8492fd3..6a7757feee66 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -4362,6 +4362,38 @@ MLXSW_ITEM32(reg, ratr, v, 0x00, 24, 1); */ MLXSW_ITEM32(reg, ratr, a, 0x00, 16, 1); +enum mlxsw_reg_ratr_type { + /* Ethernet */ + MLXSW_REG_RATR_TYPE_ETHERNET, + /* IPoIB Unicast without GRH. + * Reserved for Spectrum. + */ + MLXSW_REG_RATR_TYPE_IPOIB_UC, + /* IPoIB Unicast with GRH. Supported only in table 0 (Ethernet unicast + * adjacency). + * Reserved for Spectrum. + */ + MLXSW_REG_RATR_TYPE_IPOIB_UC_W_GRH, + /* IPoIB Multicast. + * Reserved for Spectrum. + */ + MLXSW_REG_RATR_TYPE_IPOIB_MC, + /* MPLS. + * Reserved for SwitchX/-2. + */ + MLXSW_REG_RATR_TYPE_MPLS, + /* IPinIP Encap. + * Reserved for SwitchX/-2. + */ + MLXSW_REG_RATR_TYPE_IPIP, +}; + +/* reg_ratr_type + * Adjacency entry type. + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, type, 0x04, 28, 4); + /* reg_ratr_adjacency_index_low * Bits 15:0 of index into the adjacency table. * For SwitchX and SwitchX-2, the adjacency table is linear and @@ -4416,6 +4448,34 @@ MLXSW_ITEM32(reg, ratr, trap_id, 0x0C, 0, 8); */ MLXSW_ITEM_BUF(reg, ratr, eth_destination_mac, 0x12, 6); +enum mlxsw_reg_ratr_ipip_type { + /* IPv4, address set by mlxsw_reg_ratr_ipip_ipv4_udip. */ + MLXSW_REG_RATR_IPIP_TYPE_IPV4, + /* IPv6, address set by mlxsw_reg_ratr_ipip_ipv6_ptr. */ + MLXSW_REG_RATR_IPIP_TYPE_IPV6, +}; + +/* reg_ratr_ipip_type + * Underlay destination ip type. + * Note: the type field must match the protocol of the router interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, ipip_type, 0x10, 16, 4); + +/* reg_ratr_ipip_ipv4_udip + * Underlay ipv4 dip. + * Reserved when ipip_type is IPv6. + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, ipip_ipv4_udip, 0x18, 0, 32); + +/* reg_ratr_ipip_ipv6_ptr + * Pointer to IPv6 underlay destination ip address. + * For Spectrum: Pointer to KVD linear space. + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, ipip_ipv6_ptr, 0x1C, 0, 24); + static inline void mlxsw_reg_ratr_pack(char *payload, enum mlxsw_reg_ratr_op op, bool valid, @@ -4435,6 +4495,12 @@ static inline void mlxsw_reg_ratr_eth_entry_pack(char *payload, mlxsw_reg_ratr_eth_destination_mac_memcpy_to(payload, dest_mac); } +static inline void mlxsw_reg_ratr_ipip4_entry_pack(char *payload, u32 ipv4_udip) +{ + mlxsw_reg_ratr_ipip_type_set(payload, MLXSW_REG_RATR_IPIP_TYPE_IPV4); + mlxsw_reg_ratr_ipip_ipv4_udip_set(payload, ipv4_udip); +} + /* RICNT - Router Interface Counter Register * ----------------------------------------- * The RICNT register retrieves per port performance counters -- 2.30.2