From 7c4b85ee278576816b0f9d20e48fa696f8793fdf Mon Sep 17 00:00:00 2001 From: Tobias Welz Date: Sat, 12 Jan 2019 00:37:43 +0100 Subject: [PATCH] ramips: add support for WIZnet WizFi630S board MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The WIZnet WizFi630S board is in the miniPCIe form factor. SoC: Mediatek MT7688AN RAM: 128MB Flash: 32Mb WiFi: 2.4GHz Ethernet: 3x 100Mbit USB: 1 (USB 2.0) serial ports: 2 (1x full, 1xlite) Flash and recovery instructions: Use the factory installed u-boot boot loader. It is available on UART2 (115200,8,n,1). Then get the sysupgrade image from a tftp server. Signed-off-by: Tobias Welz [whitespace and device name in makefile fixes] Signed-off-by: Petr Å tetiar --- .../ramips/base-files/etc/board.d/02_network | 4 + target/linux/ramips/dts/WIZFI630S.dts | 193 ++++++++++++++++++ target/linux/ramips/image/mt76x8.mk | 7 + 3 files changed, 204 insertions(+) create mode 100644 target/linux/ramips/dts/WIZFI630S.dts diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index bb5ff483c4..9f656199a8 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -429,6 +429,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:wan" "6@eth0" ;; + wiznet,wizfi630s) + ucidef_add_switch "switch0" \ + "0:wan" "3:lan" "4:lan" "6@eth0" + ;; wt3020-4M|\ wt3020-8M) ucidef_add_switch "switch0" \ diff --git a/target/linux/ramips/dts/WIZFI630S.dts b/target/linux/ramips/dts/WIZFI630S.dts new file mode 100644 index 0000000000..13c8f68f15 --- /dev/null +++ b/target/linux/ramips/dts/WIZFI630S.dts @@ -0,0 +1,193 @@ +//SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc"; + model = "WIZnet WizFi630S"; + + chosen { + bootargs = "console=ttyS1,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + aliases { + led-boot = &led_run; + led-failsafe = &led_run; + led-running = &led_run; + led-upgrade = &led_run; + serial0 = &uart1; + serial1 = &uartlite; + }; + + leds { + compatible = "gpio-leds"; + + led_run: run { + label = "wizfi630s:green:run"; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + }; + + ledwps { + label = "wizfi630s:green:wps"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + leduart1 { + label = "wizfi630s:green:uart1"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + leduart2 { + label = "wizfi630s:green:uart2"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + scm1 { + label = "SCM1"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + scm2 { + label = "SCM2"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "gpio"; + ralink,function = "gpio"; + }; + + i2s { + ralink,group = "i2s"; + ralink,function = "gpio"; + }; + + wdt { + ralink,group = "wdt"; + ralink,function = "gpio"; + }; + + + i2c { + ralink,group = "i2c"; + ralink,function = "gpio"; + }; + + refclk { + ralink,group = "refclk"; + ralink,function = "gpio"; + }; + }; +}; + +&wmac { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + m25p,chunked-io = <31>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; +}; + +&i2c { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&esw { + mediatek,portmap = <0x3e>; +}; + +&sdhci { + status = "okay"; + mediatek,cd-high; +}; + +&wmac { + status = "okay"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 414798d08c..cb8f181955 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -408,6 +408,13 @@ define Device/widora_neo-32m endef TARGET_DEVICES += widora_neo-32m +define Device/wiznet_wizfi630s + DTS := WIZFI630S + IMAGE_SIZE := $(ralink_default_fw_size_32M) + DEVICE_TITLE := WIZnet WizFi630S +endef +TARGET_DEVICES += wiznet_wizfi630s + define Device/wrtnode2p DTS := WRTNODE2P IMAGE_SIZE := $(ralink_default_fw_size_16M) -- 2.30.2