From 7b7de55814b209dca40b1b9729a661a2b344368f Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 15 Nov 2013 08:21:59 +0000 Subject: [PATCH] ar71xx: wndr4300: set official mac addresses Get the factory assigned mac addresses stored in the caldata partition and asign them to lan and wan interfaces. Also put the correct mac addresses into the WiFi eeprom files to ensure that the ath9k driver will use the correct ones. Signed-off-by: Stefan Agner Patchwork: http://patchwork.openwrt.org/patch/4350/ [juhosg: - move WiFi MAC address setup to the firmware hotplug file, - use the official MAC address for the 2.4GHz as well, - remove uci-defaults.sh modifications, - update commit message] Signed-off-by: Gabor Juhos SVN-Revision: 38812 --- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 13 +++++++++++-- .../ar71xx/base-files/etc/uci-defaults/02_network | 4 ++++ 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 0fd6813832..fa4b98c1c1 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -11,8 +11,6 @@ ath9k_eeprom_extract() { local count=$3 local mtd - . /lib/functions.sh - mtd=$(find_mtd_chardev $part) [ -n "$mtd" ] || \ ath9k_eeprom_die "no mtd device found for partition $part" @@ -21,9 +19,18 @@ ath9k_eeprom_extract() { ath9k_eeprom_die "failed to extract from $mtd" } +ath9k_patch_firmware_mac() { + local mac=$1 + + [ -z "$mac" ] && return + + macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6 +} + [ -e /lib/firmware/$FIRMWARE ] && exit 0 . /lib/ar71xx.sh +. /lib/functions.sh board=$(ar71xx_board_name) @@ -32,6 +39,7 @@ case "$FIRMWARE" in case $board in wndr4300) ath9k_eeprom_extract "caldata" 4096 2048 + ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0) ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -43,6 +51,7 @@ case "$FIRMWARE" in case $board in wndr4300) ath9k_eeprom_extract "caldata" 20480 2048 + ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 12) ;; *) ath9k_eeprom_die "board $board is not supported yet" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 0819cb2426..49db21bdc1 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -211,6 +211,10 @@ wndr4300) ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4" ucidef_add_switch_vlan "switch0" "2" "0t 5" + mac_lan=$(mtd_get_mac_binary caldata 0) + [ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan" + mac_wan=$(mtd_get_mac_binary caldata 6) + [ -n "$mac_wan" ] && ucidef_set_interface_macaddr "wan" "$mac_wan" ;; all0305 |\ -- 2.30.2