From 7a04b8491a077471a34938b8ca060c37220953be Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 24 Jun 2009 11:46:44 +0800 Subject: [PATCH] ACPI: Rename ACPI processor device bus ID Some BIOS re-use the same processor bus id in different scope: \_SB.SCK0.CPU0 \_SB.SCK1.CPU0 But the (deprecated) /proc/acpi/ interface assumes the bus-id's are unique, resulting in an OOPS when the processor driver is loaded: WARNING: at fs/proc/generic.c:590 proc_register+0x148/0x180() Hardware name: Sunrise Ridge proc_dir_entry 'processor/CPU0' already registered Call Trace: [] warn_slowpath+0xb1/0xe5 [] ? ida_get_new_above+0x190/0x1b1 [] ? idr_pre_get+0x5f/0x75 [] proc_register+0x148/0x180 [] proc_mkdir_mode+0x3d/0x52 [] proc_mkdir+0x11/0x13 [] acpi_processor_start+0x755/0x9bc [processor] Rename the processor device bus id. And the new bus id will be generated as the following format: CPU+ CPU ID For example: If the cpu ID is 5, then the bus ID will be "CPU5". If the CPU ID is 10, then the bus ID will be "CPUA". Yes, this will change the directory names seen in /proc/acpi/processor/* on some systems. Before this patch, those directory names where totally arbitrary strings based on the interal AML device strings. http://bugzilla.kernel.org/show_bug.cgi?id=13612 Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 23f0fb84f1c1..105562e375ac 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -649,7 +649,16 @@ static int acpi_processor_get_info(struct acpi_device *device) return -ENODEV; } } - + /* + * On some boxes several processors use the same processor bus id. + * But they are located in different scope. For example: + * \_SB.SCK0.CPU0 + * \_SB.SCK1.CPU0 + * Rename the processor device bus id. And the new bus id will be + * generated as the following format: + * CPU+CPU ID. + */ + sprintf(acpi_device_bid(device), "CPU%X", pr->id); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, pr->acpi_id)); -- 2.30.2