From 79d867c2e683f7080a8724a54a4a12ac0ce1f837 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Thu, 5 May 2016 16:59:12 -0700 Subject: [PATCH] usb: ehci-mx6: allow board_ehci_hcd_init to fail There could be runtime determined board specific reason why a EHCI initialization fails (e.g. ENODEV if a Port is not available). In this case, properly return the error code. While at it, that function (board_ehci_hcd_init) has actually two documentation blocks... Use the correct function name for the documentation block of board_usb_phy_mode. Signed-off-by: Stefan Agner --- drivers/usb/host/ehci-mx6.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index a981b50fda..bb48d0dea0 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -254,7 +254,7 @@ static void usb_oc_config(int index) } /** - * board_ehci_hcd_init - override usb phy mode + * board_usb_phy_mode - override usb phy mode * @port: usb host/otg port * * Target board specific, override usb_phy_mode. @@ -310,6 +310,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, #endif struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR + (controller_spacing * index)); + int ret; if (index > 3) return -EINVAL; @@ -317,7 +318,9 @@ int ehci_hcd_init(int index, enum usb_init_type init, mdelay(1); /* Do board specific initialization */ - board_ehci_hcd_init(index); + ret = board_ehci_hcd_init(index); + if (ret) + return ret; usb_power_config(index); usb_oc_config(index); -- 2.30.2