From 796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95 Mon Sep 17 00:00:00 2001 From: Perry Melange Date: Wed, 7 Aug 2019 19:25:13 +0200 Subject: [PATCH] ath79: add support for D-Link DIR-842 C3 Hardware spec of DIR-842 C3: SoC: QCA9563 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9888 WiFi 2.4Ghz: QCA9563 USB: circuit onboard, but components are not soldered Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Perry Melange --- .../ath79/base-files/etc/board.d/01_leds | 1 + .../ath79/base-files/etc/board.d/02_network | 2 + .../etc/hotplug.d/firmware/10-ath9k-eeprom | 1 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 1 + .../ath79/dts/qca9563_dlink_dir-842-c3.dts | 41 +++++++++++++++++++ target/linux/ath79/image/generic.mk | 7 ++++ 6 files changed, 53 insertions(+) create mode 100644 target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 35cb74db287..aad41b0dad1 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -64,6 +64,7 @@ comfast,cf-e5) ;; dlink,dir-842-c1|\ dlink,dir-842-c2|\ +dlink,dir-842-c3|\ dlink,dir-859-a1) ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20" ;; diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 9c6429984f5..e3c1f423f1c 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -123,6 +123,7 @@ ath79_setup_interfaces() dlink,dir-835-a1|\ dlink,dir-842-c1|\ dlink,dir-842-c2|\ + dlink,dir-842-c3|\ dlink,dir-859-a1|\ engenius,epg5000|\ tplink,archer-c2-v3|\ @@ -316,6 +317,7 @@ ath79_setup_macs() ;; dlink,dir-842-c1|\ dlink,dir-842-c2|\ + dlink,dir-842-c3|\ dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index a7d482580bc..62d53248bcb 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -107,6 +107,7 @@ case "$FIRMWARE" in ;; dlink,dir-842-c1|\ dlink,dir-842-c2|\ + dlink,dir-842-c3|\ dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index f6e2b801cbe..501053e9d70 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -191,6 +191,7 @@ case "$FIRMWARE" in case $board in dlink,dir-842-c1|\ dlink,dir-842-c2|\ + dlink,dir-842-c3|\ nec,wg1200cr) ath10kcal_extract "art" 20480 12064 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts b/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts new file mode 100644 index 00000000000..2a15176a8a5 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9563_dlink_dir-842-c.dtsi" + +/ { + compatible = "dlink,dir-842-c3", "qca,qca9563"; + model = "D-Link DIR-842 C3"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "dir-842-c3:green:wps"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + power: power { + label = "dir-842-c3:green:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "dir-842-c3:green:internet"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "dir-842-c3:green:wlan"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 80095827788..abaf1a3e07e 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -399,6 +399,13 @@ define Device/dlink_dir-842-c2 endef TARGET_DEVICES += dlink_dir-842-c2 +define Device/dlink_dir-842-c3 + $(Device/dlink_dir-842-c) + DEVICE_VARIANT := C3 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct +endef +TARGET_DEVICES += dlink_dir-842-c3 + define Device/elecom_wrc-1750ghbk2-i ATH_SOC := qca9563 DEVICE_VENDOR := ELECOM -- 2.30.2