From 79340db7f1f676b8eb5911f4993ebedf27009c0b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 24 Mar 2015 20:07:34 -0600 Subject: [PATCH] ARM: bcm2835: implement phys_to_bus/bus_to_phys The BCM283[56] contain both a L1 and L2 cache between the GPU (a/k/a VideoCore CPU?) and DRAM. DMA-capable peripherals can also optionally access DRAM via this same L2 cache (although they always bypass the L1 cache). Peripherals select whether to use or bypass the cache via the top two bits of the bus address. An IOMMU exists between the ARM CPU and the rest of the system. This controls whether the ARM CPU's accesses use or bypass the L1 and/or L2 cache. This IOMMU is configured/controlled exclusively by the VideoCore CPU. In order for DRAM accesses made by the ARM core to be coherent with accesses made by other DMA peripherals, we must program a bus address into those peripherals that causes the peripheral's accesses to use the same set of caches that the ARM core's accesses will use. On the RPi1, the VideoCore firmware sets up the IOMMU to enable use of the L2 cache. This corresponds to addresses based at 0x40000000. On the RPi2, the VideoCore firmware sets up the IOMMU to disable use of the L2 cache. This corresponds to addresses based at 0xc0000000. This patch implements U-Boot's phys_to_bus/bus_to_phys APIs according to those rules. For full details of this setup, please see Dom Cobley's description at: http://lists.denx.de/pipermail/u-boot/2015-March/208201.html http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/215038 https://www.mail-archive.com/u-boot@lists.denx.de/msg166568.html Signed-off-by: Stephen Warren --- arch/arm/mach-bcm283x/Kconfig | 3 +++ arch/arm/mach-bcm283x/Makefile | 2 +- arch/arm/mach-bcm283x/phys2bus.c | 22 ++++++++++++++++++++++ 3 files changed, 26 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-bcm283x/phys2bus.c diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index b43f2d91fd..0c04c301b2 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -23,6 +23,9 @@ config DM_SERIAL config DM_GPIO default y +config PHYS_TO_BUS + default y + config SYS_BOARD default "rpi" if TARGET_RPI default "rpi_2" if TARGET_RPI_2 diff --git a/arch/arm/mach-bcm283x/Makefile b/arch/arm/mach-bcm283x/Makefile index 2505428bab..ac27d00e2a 100644 --- a/arch/arm/mach-bcm283x/Makefile +++ b/arch/arm/mach-bcm283x/Makefile @@ -5,4 +5,4 @@ # obj-$(CONFIG_TARGET_RPI) += lowlevel_init.o -obj-y += init.o reset.o timer.o mbox.o +obj-y += init.o reset.o timer.o mbox.o phys2bus.o diff --git a/arch/arm/mach-bcm283x/phys2bus.c b/arch/arm/mach-bcm283x/phys2bus.c new file mode 100644 index 0000000000..fc1c29905d --- /dev/null +++ b/arch/arm/mach-bcm283x/phys2bus.c @@ -0,0 +1,22 @@ +/* + * Copyright 2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +unsigned long phys_to_bus(unsigned long phys) +{ +#ifdef CONFIG_BCM2836 + return 0xc0000000 | phys; +#else + return 0x40000000 | phys; +#endif +} + +unsigned long bus_to_phys(unsigned long bus) +{ + return bus & ~0xc0000000; +} -- 2.30.2