From 77c550189369eeb82f2a67681b343dea68809e62 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Fri, 8 May 2015 18:28:34 -0700 Subject: [PATCH] imx: ventana: default msata/pci mux to pci before PCI enumeration PCI enumeration occurs early, before we fully configure our GPIO's. Make sure we steer the MSATA/PCI mux to PCI in board_init to ensure PCI is selected before enumeration. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 8cfc1f2d5a..cf866ca472 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1174,13 +1174,10 @@ static void setup_board_gpio(int board) gpio_direction_output(GP_RS232_EN, (hwconfig("rs232")) ? 0 : 1); /* MSATA Enable */ - gpio_request(GP_MSATA_SEL, "msata_en"); if (is_cpu_type(MXC_CPU_MX6Q) && test_bit(EECONFIG_SATA, info->config)) { gpio_direction_output(GP_MSATA_SEL, (hwconfig("msata")) ? 1 : 0); - } else { - gpio_direction_output(GP_MSATA_SEL, 0); } #if !defined(CONFIG_CMD_PCI) @@ -1435,6 +1432,10 @@ int board_init(void) /* GW522x Uses GPIO3_IO23 for PCIE_RST# */ if (board_type == GW52xx && ventana_info.model[4] == '2') gpio_cfg[board_type].pcie_rst = IMX_GPIO_NR(3, 23); + + /* MSATA Enable - default to PCI */ + gpio_request(GP_MSATA_SEL, "msata_en"); + gpio_direction_output(GP_MSATA_SEL, 0); } return 0; -- 2.30.2