From 7777cb8ba08dabcab8dc0e91ac0a26dde675edb6 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 7 Mar 2016 10:58:40 +0900 Subject: [PATCH] phy: rcar-gen2: add fallback binding In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven Acked-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt | 8 +++++++- drivers/phy/phy-rcar-gen2.c | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index d564ba4f1cf6..91da947ae9b6 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -7,6 +7,12 @@ Required properties: - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. + "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: offset and length of the register block. - #address-cells: number of address cells for the USB channel subnodes, must be <1>. @@ -34,7 +40,7 @@ the USB channel; see the selector meanings below: Example (Lager board): usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7790"; + compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c index c7a05996d5c1..97d4dd6ea924 100644 --- a/drivers/phy/phy-rcar-gen2.c +++ b/drivers/phy/phy-rcar-gen2.c @@ -195,6 +195,7 @@ static const struct of_device_id rcar_gen2_phy_match_table[] = { { .compatible = "renesas,usb-phy-r8a7790" }, { .compatible = "renesas,usb-phy-r8a7791" }, { .compatible = "renesas,usb-phy-r8a7794" }, + { .compatible = "renesas,rcar-gen2-usb-phy" }, { } }; MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table); -- 2.30.2