From 776bd20fa25fd8fc71fd4a2f213c106d6868db39 Mon Sep 17 00:00:00 2001 From: "ravinandan.arakali@neterion.com" Date: Tue, 6 Sep 2005 21:36:56 -0700 Subject: [PATCH] [PATCH] S2io: Hardware and miscellaneous fixes Hi, This patch contains the following hardware related fixes and other miscellaneous bug fixes. 1. Updated the definition of single and double-bit ECC errors 2. Earlier we were allocating Transmit descriptors equal to MAX_SKB_FRAGS. This was causing a boundary condition failure. Need to allocate MAX_SKB_FRAGS+1 descriptors. 3. On some platforms(like PPC), pci_alloc_consistent() can return a zero DMA address. Since the NIC cannot handle zero-addresses, a workaround has been provided. Basically, we don't use such that page. We reallocate. 4. If list_info allocation failed during driver load, check for it during driver exit and return instead of trying to dereference NULL pointer. 5. Increase the debug level of few non-critical debug messages. 6. Reset the card on critical ECC double errors only in case of XframeI since XframeII can recover from such errors. 7. Print copyright message on driver load. 8. Bumped up the driver version no. to 2.0.8.1 Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 13 +++--- drivers/net/s2io.c | 98 ++++++++++++++++++++++++++++++++--------- drivers/net/s2io.h | 5 ++- 3 files changed, 88 insertions(+), 28 deletions(-) diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 2234a8f05eb2..7cefe5507b9e 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -1,5 +1,5 @@ /************************************************************************ - * regs.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC + * regs.h: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC * Copyright(c) 2002-2005 Neterion Inc. * This software may be used and distributed according to the terms of @@ -713,13 +713,16 @@ typedef struct _XENA_dev_config { u64 mc_err_reg; #define MC_ERR_REG_ECC_DB_ERR_L BIT(14) #define MC_ERR_REG_ECC_DB_ERR_U BIT(15) +#define MC_ERR_REG_MIRI_ECC_DB_ERR_0 BIT(18) +#define MC_ERR_REG_MIRI_ECC_DB_ERR_1 BIT(20) #define MC_ERR_REG_MIRI_CRI_ERR_0 BIT(22) #define MC_ERR_REG_MIRI_CRI_ERR_1 BIT(23) #define MC_ERR_REG_SM_ERR BIT(31) -#define MC_ERR_REG_ECC_ALL_SNG (BIT(6) | \ - BIT(7) | BIT(17) | BIT(19)) -#define MC_ERR_REG_ECC_ALL_DBL (BIT(14) | \ - BIT(15) | BIT(18) | BIT(20)) +#define MC_ERR_REG_ECC_ALL_SNG (BIT(2) | BIT(3) | BIT(4) | BIT(5) |\ + BIT(6) | BIT(7) | BIT(17) | BIT(19)) +#define MC_ERR_REG_ECC_ALL_DBL (BIT(10) | BIT(11) | BIT(12) |\ + BIT(13) | BIT(14) | BIT(15) |\ + BIT(18) | BIT(20)) u64 mc_err_mask; u64 mc_err_alarm; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 5dda043bd9d7..7cfe1669ae9d 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1,5 +1,5 @@ /************************************************************************ - * s2io.c: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC + * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC * Copyright(c) 2002-2005 Neterion Inc. * This software may be used and distributed according to the terms of @@ -28,7 +28,7 @@ * explaination of all the variables. * rx_ring_num : This can be used to program the number of receive rings used * in the driver. - * rx_ring_len: This defines the number of descriptors each ring can have. This + * rx_ring_sz: This defines the number of descriptors each ring can have. This * is also an array of size 8. * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver. * tx_fifo_len: This too is an array of 8. Each element defines the number of @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.3.1"; +static char s2io_driver_version[] = "Version 2.0.8.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -404,7 +404,7 @@ static int init_shared_mem(struct s2io_nic *nic) config->tx_cfg[i].fifo_len - 1; mac_control->fifos[i].fifo_no = i; mac_control->fifos[i].nic = nic; - mac_control->fifos[i].max_txds = MAX_SKB_FRAGS; + mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 1; for (j = 0; j < page_num; j++) { int k = 0; @@ -418,6 +418,26 @@ static int init_shared_mem(struct s2io_nic *nic) DBG_PRINT(ERR_DBG, "failed for TxDL\n"); return -ENOMEM; } + /* If we got a zero DMA address(can happen on + * certain platforms like PPC), reallocate. + * Store virtual address of page we don't want, + * to be freed later. + */ + if (!tmp_p) { + mac_control->zerodma_virt_addr = tmp_v; + DBG_PRINT(INIT_DBG, + "%s: Zero DMA address for TxDL. ", dev->name); + DBG_PRINT(INIT_DBG, + "Virtual address %llx\n", (u64)tmp_v); + tmp_v = pci_alloc_consistent(nic->pdev, + PAGE_SIZE, &tmp_p); + if (!tmp_v) { + DBG_PRINT(ERR_DBG, + "pci_alloc_consistent "); + DBG_PRINT(ERR_DBG, "failed for TxDL\n"); + return -ENOMEM; + } + } while (k < lst_per_page) { int l = (j * lst_per_page) + k; if (l == config->tx_cfg[i].fifo_len) @@ -600,7 +620,7 @@ static void free_shared_mem(struct s2io_nic *nic) mac_info_t *mac_control; struct config_param *config; int lst_size, lst_per_page; - + struct net_device *dev = nic->dev; if (!nic) return; @@ -616,9 +636,10 @@ static void free_shared_mem(struct s2io_nic *nic) lst_per_page); for (j = 0; j < page_num; j++) { int mem_blks = (j * lst_per_page); - if ((!mac_control->fifos[i].list_info) || - (!mac_control->fifos[i].list_info[mem_blks]. - list_virt_addr)) + if (!mac_control->fifos[i].list_info) + return; + if (!mac_control->fifos[i].list_info[mem_blks]. + list_virt_addr) break; pci_free_consistent(nic->pdev, PAGE_SIZE, mac_control->fifos[i]. @@ -628,6 +649,18 @@ static void free_shared_mem(struct s2io_nic *nic) list_info[mem_blks]. list_phy_addr); } + /* If we got a zero DMA address during allocation, + * free the page now + */ + if (mac_control->zerodma_virt_addr) { + pci_free_consistent(nic->pdev, PAGE_SIZE, + mac_control->zerodma_virt_addr, + (dma_addr_t)0); + DBG_PRINT(INIT_DBG, + "%s: Freeing TxDL with zero DMA addr. ", dev->name); + DBG_PRINT(INIT_DBG, "Virtual address %llx\n", + (u64)(mac_control->zerodma_virt_addr)); + } kfree(mac_control->fifos[i].list_info); } @@ -2479,9 +2512,10 @@ static void rx_intr_handler(ring_info_t *ring_data) #endif spin_lock(&nic->rx_lock); if (atomic_read(&nic->card_state) == CARD_DOWN) { - DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n", + DBG_PRINT(INTR_DBG, "%s: %s going down for reset\n", __FUNCTION__, dev->name); spin_unlock(&nic->rx_lock); + return; } get_info = ring_data->rx_curr_get_info; @@ -2596,8 +2630,14 @@ static void tx_intr_handler(fifo_info_t *fifo_data) if (txdlp->Control_1 & TXD_T_CODE) { unsigned long long err; err = txdlp->Control_1 & TXD_T_CODE; - DBG_PRINT(ERR_DBG, "***TxD error %llx\n", - err); + if ((err >> 48) == 0xA) { + DBG_PRINT(TX_DBG, "TxD returned due \ + to loss of link\n"); + } + else { + DBG_PRINT(ERR_DBG, "***TxD error \ + %llx\n", err); + } } skb = (struct sk_buff *) ((unsigned long) @@ -2689,12 +2729,16 @@ static void alarm_intr_handler(struct s2io_nic *nic) if (val64 & MC_ERR_REG_ECC_ALL_DBL) { nic->mac_control.stats_info->sw_stat. double_ecc_errs++; - DBG_PRINT(ERR_DBG, "%s: Device indicates ", + DBG_PRINT(INIT_DBG, "%s: Device indicates ", dev->name); - DBG_PRINT(ERR_DBG, "double ECC error!!\n"); + DBG_PRINT(INIT_DBG, "double ECC error!!\n"); if (nic->device_type != XFRAME_II_DEVICE) { - netif_stop_queue(dev); - schedule_work(&nic->rst_timer_task); + /* Reset XframeI only if critical error */ + if (val64 & (MC_ERR_REG_MIRI_ECC_DB_ERR_0 | + MC_ERR_REG_MIRI_ECC_DB_ERR_1)) { + netif_stop_queue(dev); + schedule_work(&nic->rst_timer_task); + } } } else { nic->mac_control.stats_info->sw_stat. @@ -2706,7 +2750,8 @@ static void alarm_intr_handler(struct s2io_nic *nic) val64 = readq(&bar0->serr_source); if (val64 & SERR_SOURCE_ANY) { DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name); - DBG_PRINT(ERR_DBG, "serious error!!\n"); + DBG_PRINT(ERR_DBG, "serious error %llx!!\n", + (unsigned long long)val64); netif_stop_queue(dev); schedule_work(&nic->rst_timer_task); } @@ -3130,7 +3175,7 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; /* Avoid "put" pointer going beyond "get" pointer */ if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) { - DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n"); + DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n"); netif_stop_queue(dev); dev_kfree_skb(skb); spin_unlock_irqrestore(&sp->tx_lock, flags); @@ -3528,7 +3573,7 @@ static void s2io_set_multicast(struct net_device *dev) val64 = readq(&bar0->mac_cfg); sp->promisc_flg = 1; - DBG_PRINT(ERR_DBG, "%s: entered promiscuous mode\n", + DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n", dev->name); } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) { /* Remove the NIC from promiscuous mode */ @@ -3543,7 +3588,7 @@ static void s2io_set_multicast(struct net_device *dev) val64 = readq(&bar0->mac_cfg); sp->promisc_flg = 0; - DBG_PRINT(ERR_DBG, "%s: left promiscuous mode\n", + DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name); } @@ -5325,7 +5370,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) break; } } - config->max_txds = MAX_SKB_FRAGS; + config->max_txds = MAX_SKB_FRAGS + 1; /* Rx side parameters. */ if (rx_ring_sz[0] == 0) @@ -5525,9 +5570,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (sp->device_type & XFRAME_II_DEVICE) { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + DBG_PRINT(ERR_DBG, "(rev %d), %s", get_xena_rev_id(sp->pdev), s2io_driver_version); +#ifdef CONFIG_2BUFF_MODE + DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); +#endif + + DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", sp->def_mac_addr[0].mac_addr[0], sp->def_mac_addr[0].mac_addr[1], @@ -5544,9 +5594,13 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } else { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + DBG_PRINT(ERR_DBG, "(rev %d), %s", get_xena_rev_id(sp->pdev), s2io_driver_version); +#ifdef CONFIG_2BUFF_MODE + DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); +#endif + DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", sp->def_mac_addr[0].mac_addr[0], sp->def_mac_addr[0].mac_addr[1], diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index bc64d967f080..89151cb52181 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -1,5 +1,5 @@ /************************************************************************ - * s2io.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC + * s2io.h: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC * Copyright(c) 2002-2005 Neterion Inc. * This software may be used and distributed according to the terms of @@ -622,6 +622,9 @@ typedef struct mac_info { /* Fifo specific structure */ fifo_info_t fifos[MAX_TX_FIFOS]; + /* Save virtual address of TxD page with zero DMA addr(if any) */ + void *zerodma_virt_addr; + /* rx side stuff */ /* Ring specific structure */ ring_info_t rings[MAX_RX_RINGS]; -- 2.30.2