From 773328da243978bebac82bf4c45604281edb6975 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 26 Dec 2014 13:28:20 -0600 Subject: [PATCH] mfd: tps65218: Make INT[12] and STATUS registers volatile STATUS register can be modified by the HW, so we should bypass cache because of that. In the case of INT[12] registers, they are the ones that actually clear the IRQ source at the time they are read. If we rely on the cache for them, we will never be able to clear the interrupt, which will cause our IRQ line to be disabled due to IRQ throttling. Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC Cc: # v3.15+ Signed-off-by: Felipe Balbi Signed-off-by: Lee Jones --- drivers/mfd/tps65218.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c index 0d256cb002eb..2243f7588560 100644 --- a/drivers/mfd/tps65218.c +++ b/drivers/mfd/tps65218.c @@ -125,10 +125,21 @@ int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg, } EXPORT_SYMBOL_GPL(tps65218_clear_bits); +static const struct regmap_range tps65218_yes_ranges[] = { + regmap_reg_range(TPS65218_REG_INT1, TPS65218_REG_INT2), + regmap_reg_range(TPS65218_REG_STATUS, TPS65218_REG_STATUS), +}; + +static const struct regmap_access_table tps65218_volatile_table = { + .yes_ranges = tps65218_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges), +}; + static struct regmap_config tps65218_regmap_config = { .reg_bits = 8, .val_bits = 8, .cache_type = REGCACHE_RBTREE, + .volatile_table = &tps65218_volatile_table, }; static const struct regmap_irq tps65218_irqs[] = { -- 2.30.2