From 766a1fe78fc3e4c0cc688340ff319b3b0863fb03 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 31 Aug 2016 12:35:16 +0200 Subject: [PATCH] ARM: omap3: Add missing memory node in overo and torpedo boards The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" But these boards don't have a memory node defined, so removing the skeleton.dtsi inclusion from omap3.dtsi will cause a change in the compiled DTB. Add a dummy memory node so the compiled DTB doesn't change if the skeleton.dtsi is removed from omap3.dtsi. Eventually the correct starting addresses and sizes should be used but I didn't find that information. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 5 +++++ arch/arm/boot/dts/omap3-overo-base.dtsi | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 1c2c74655416..5a63a8d8e177 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,6 +13,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0 0>; + }; + leds { compatible = "gpio-leds"; user0 { diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 3e946cac55f3..91b2e423c7c0 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -11,6 +11,12 @@ */ / { + + memory { + device_type = "memory"; + reg = <0 0>; + }; + pwmleds { compatible = "pwm-leds"; -- 2.30.2