From 747f2dd5251c024984e4536291655fa249e7654d Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 29 Feb 2016 17:19:04 +0000
Subject: [PATCH] mac80211: backport from trunk r48782 + required kernel
 patches and mt76, mwlwifi

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48822
---
 package/kernel/mac80211/Makefile              | 2542 ++++++++---------
 .../mac80211/patches/001-fix_build.patch      |   12 +-
 .../patches/002-change_allconfig.patch        |   22 +-
 .../004-backports-add-skb_free_frag.patch     |   21 +
 .../patches/004-backports_debugfs_fix.patch   |   10 -
 .../005-backports-add-napi_alloc_frag.patch   |   20 +
 .../patches/008-fix_netdev_unregister.patch   |   16 -
 .../mac80211/patches/020-add_mpls_h.patch     |   37 -
 .../mac80211/patches/030-rt2x00_options.patch |    6 +-
 .../patches/040-brcmutil_option.patch         |    4 +-
 .../mac80211/patches/045-bcma-from-4.1.patch  |  104 -
 .../patches/050-lib80211_option.patch         |    4 +-
 .../patches/060-no_local_ssb_bcma.patch       |   56 +-
 .../patches/070-ath_common_config.patch       |   13 +-
 .../patches/090-linux_3_18_12_compat.patch    |   29 -
 .../100-remove-cryptoapi-dependencies.patch   |  376 +++
 .../patches/100-revert-cryptoapi-ports.patch  | 2055 -------------
 .../110-mac80211_keep_keys_on_stop_ap.patch   |    2 +-
 .../patches/150-disable_addr_notifier.patch   |   22 +-
 .../kernel/mac80211/patches/210-ap_scan.patch |    2 +-
 ...9k-force-rx_clear-when-disabling-rx.patch} |    0
 ...intermediate-software-queue-implemen.patch |  882 ------
 ...etries-for-powersave-response-frames.patch |  121 +
 .../301-mac80211-lock-rate-control.patch      |  125 -
 ...rt-only-triggering-DFS-detector-line.patch |   21 -
 ...d-low-power-tx-gain-table-for-AR953x.patch |   95 +
 ...dd-DFS-support-for-extension-channel.patch |   76 -
 ...3-rt2x00-fix-monitor-mode-regression.patch |  156 +
 ...9k-allow-40MHz-radar-detection-width.patch |   19 -
 ...th9k-avoid-ANI-restart-if-no-trigger.patch |   32 +
 .../305-ath5k-channel-change-fix.patch        |  137 -
 ...-up-ANI-per-channel-pointer-checking.patch |   91 +
 .../patches/306-ath5k-fix-reset-race.patch    |   96 -
 ...et-while-BB-panic-0x4000409-on-ar956.patch |   31 +
 ...istent-use-of-tab-and-space-in-inden.patch |   27 +
 ...k-fix-tracking-of-enabled-AP-beacons.patch |   76 -
 ...-data-bus-error-on-ar9300-and-ar9580.patch |   65 +
 ...l_ht-fix-rounding-issue-in-MCS-durat.patch |   43 -
 .../309-01-brcmfmac-add-missing-include.patch |   19 +
 ...cmfmac-fix-sdio-sg-table-alloc-crash.patch |  118 +
 ...9k-disable-TPC-support-again-for-now.patch |   22 -
 ...eeprom-magic-mismatch-on-flash-based.patch |   38 +
 ...ook-up-stations-for-multicast-addres.patch |   21 -
 ...it-the-number-of-DFS-interfaces-to-1.patch |   55 +
 ...ac80211-remove-drop_unencrypted-code.patch |  130 -
 ...-t-look-up-destination-station-twice.patch |   71 -
 ...c80211-fix-txq-queue-related-crashes.patch |   27 +
 ...addr-VLAN-frames-earlier-if-not-conn.patch |   27 -
 ...necessary-frame-drops-in-mesh-fwding.patch |   57 +
 ...-work-after-scan-complete-for-all-VI.patch |  103 +
 ...-mesh-avoid-pointless-station-lookup.patch |   33 -
 ...oid-duplicate-TX-path-station-lookup.patch |  267 --
 ...15-mac80211-fix-ibss-scan-parameters.patch |   57 +
 ...log-spam-from-ieee80211_handle_pwr_c.patch |   38 -
 ...-rx.c-fix-use-of-uninitialised-value.patch |   50 +
 ...e-condition-in-msgbuf-ioctl-processi.patch |   35 -
 ...l_ht-fix-out-of-bound-in-minstrel_ht.patch |   45 +
 ...msgbuf-commonring-size-for-improved-.patch |   30 -
 ...MSDU-skb_linearize-call-to-ieee80211.patch |   35 +
 ...tc-add-new-WMI_REG_RMW_CMDID-command.patch |  307 --
 ...ction-for-802.3-conversion-with-sepa.patch |  186 ++
 ...pa_cal-use-defs-instead-of-magin-num.patch |   89 -
 ...port-for-non-linear-skbs-in-ieee8021.patch |  159 ++
 ...ar9271_hw_pa_cal-use-proper-makroses.patch |   79 -
 ...egacy-and-HT-rate-in-injected-frames.patch |  155 +
 ...th9k-ar9271_hw_pa_cal-use-RMW-buffer.patch |   48 -
 .../322-mac80211-add-A-MSDU-tx-support.patch  |  317 ++
 ...ing-primary-channel-for-80-MHz-widt.patch} |   13 +-
 ...-descriptors-of-current-component-on.patch |   51 +
 ...toring-PMU-core-without-wrapper-addr.patch |   28 +
 ...tended-capabilities-of-ChipCommon-co.patch |   43 +
 ...PMU-registers-using-standalone-PMU-c.patch |  148 +
 ...port-for-14e4-4365-PCI-ID-with-BCM43.patch |   38 +
 ...read-to-be-compatible-with-ath9k_htc.patch |   35 -
 ...add-new-function-ath9k_hw_read_array.patch |   69 -
 ...NULL-character-in-NVRAM-as-separator.patch |   32 +
 ...-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch |   24 -
 ...-Increase-the-default-timeouts-a-bit.patch |   41 +
 ...F-load-complete-quickly-and-reliably.patch |   87 +
 ...hot-read-in-ath9k_hw_update_mibstats.patch |   39 -
 ...27-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch |   71 -
 ...-Remove-MPP-table-entries-with-MPath.patch |   54 +
 ...er-related-optimisation-in-ar5008_hw.patch |   27 -
 ...let-unused-MPP-table-entries-timeout.patch |  104 +
 ...set_4k_power_cal_tabl-use-rmw-buffer.patch |   26 -
 ...y-mesh-and-mpp-path-removal-function.patch |  143 +
 ...ffer-in-ath9k_hw_set_operating_mode-.patch |   43 -
 ...l-Change-expected-throughput-unit-ba.patch |   51 +
 ...w_4k_set_board_values-use-rmw-buffer.patch |   26 -
 ...c-Increase-nr-of-supported-flowrings.patch |  307 ++
 ...th9k_hw_analog_shift_rmw-use-REG_RMW.patch |   27 -
 ...lty-variable-initialization-in-ieee8.patch |   22 +
 ...W-and-rmw-buffer-in-ath9k_hw_4k_set_.patch |   47 -
 ...existing-page-fragments-in-A-MSDU-rx.patch |  132 +
 ...W-and-rmw-buffer-in-ath9k_hw_def_set.patch |   67 -
 ...0211-fix-wiphy-supported_band-access.patch |   36 +
 ...Fix-oops-when-SDIO-device-is-removed.patch |   44 -
 ...002-brcmfmac-Simplify-watchdog-sleep.patch |  157 -
 ...brcmfmac-Fix-possible-race-condition.patch |   83 -
 ...Add-support-for-BCM4345-SDIO-chipset.patch |   86 -
 ...l_ht-set-A-MSDU-tx-limits-based-on-s.patch |   61 +
 ...c-remove-duplication-of-ramsize-info.patch |   48 -
 ...brcmfmac-always-perform-cores-checks.patch |   74 -
 ...mfmac-rename-chip-download-functions.patch |  240 --
 ...device-is-ready-for-download-after-b.patch |   61 -
 ...-ram-size-info-from-internal-memory-.patch |  367 ---
 ...ve-restore-memory-into-account-for-S.patch |   96 -
 ...cmfmac-fix-watchdog-timer-regression.patch |   59 -
 ...l_ht-set-default-tx-aggregation-time.patch |   31 +
 ...-runtime-pm-for-sdio-host-controller.patch |   44 -
 ...d-necessary-memory-barriers-for-SDIO.patch |  171 --
 ...unnecessary-new-line-in-pcie-console.patch |   26 -
 ...ULE_FIRMWARE-macros-for-bcm4356-PCIe.patch |   26 -
 ...dd-support-for-BCM43430-SDIO-chipset.patch |  138 -
 ...c-only-support-the-BCM43455-7-device.patch |   50 -
 ...-support-for-unreleased-BCM4354-PCIe.patch |   52 -
 ...l_ht-fix-a-logic-error-in-RTS-CTS-ha.patch |   26 +
 ...ac-disable-MBSS-feature-for-BCM43362.patch |   28 -
 ...tic-superset-of-channels-for-wiphy-b.patch |  300 --
 ...wiphy-band-information-upon-updating.patch |   29 -
 ...ac-add-description-for-feature-flags.patch |   24 -
 ...e-scheduled-scan-support-conditional.patch |   51 -
 ...d-support-for-BCM4324-rev-B5-chipset.patch |   43 -
 ...ess-interrupt-regardless-sdiod-state.patch |   27 -
 ...brcmfmac-fix-sdio-suspend-and-resume.patch |   68 -
 ...-add-support-for-BCM4358-PCIe-device.patch |   77 -
 ...-add-additional-43602-pcie-device-id.patch |   30 -
 ...port-for-multiple-PCIE-devices-in-nv.patch |  351 ---
 .../340-brcmfmac-cleanup-a-sizeof.patch       |   23 -
 ...check-result-of-USB-firmware-request.patch |   33 -
 ...t-ACPI-power-management-for-brcmfmac.patch |   47 -
 .../343-brcmfmac-avoid-gcc-5.1-warning.patch  |   30 -
 ...evice-tree-node-without-interrupts-p.patch |   45 -
 ...-throughput-by-scheduling-msbug-flow.patch |   87 -
 ...ve-pci-shared-structure-rev4-support.patch |   41 -
 ...dummy-cache-flush-invalidate-functio.patch |  120 -
 ...-add-support-for-dma-indices-feature.patch |  270 --
 ...ull-pointer-access-when-brcmf_msgbuf.patch |  102 -
 ...alid-access-to-struct-acpi_device-fi.patch |   63 -
 ...ac-simplify-check-stripping-v2-NVRAM.patch |   56 -
 ...y-check-finding-NVRAM-v1-device-path.patch |   57 -
 ...-as-end-of-comment-when-parsing-NVRA.patch |   45 -
 ...allow-NVRAM-values-to-contain-spaces.patch |   50 -
 ...h9k-fix-DMA-stop-sequence-for-AR9003.patch |   33 -
 ...-NVRAMs-containing-pci-devpaths-inst.patch |   56 -
 ...hy-perm_addr-to-hardware-MAC-address.patch |   23 -
 ...ect-data-pointer-in-NVRAM-parser-str.patch |  144 -
 ...for-14e4-4321-PCI-dev-with-BCM4321-c.patch |   32 -
 ...c-Update-msgbuf-read-pointer-quicker.patch |  109 -
 ...cmfmac-remove-chipinfo-debugfs-entry.patch |   39 -
 ...watchdog-reset-from-brcmf_pcie_busco.patch |   53 -
 ...ugfs_create_devm_seqfile-helper-func.patch |   69 -
 ...9k_hw-fix-device-ID-check-for-AR956x.patch |   20 -
 ...mfmac-Check-if-firmware-supports-p2p.patch |   42 -
 ...iphy-mode-and-interface-combinations.patch |  198 --
 ...rcmfmac-rework-.get_station-callback.patch |  326 ---
 ...io-return-EIO-when-device-communicat.patch |   56 -
 ...DMA-stop-related-messages-debug-only.patch |   74 -
 ...p-for-non-netdev-interface-in-p2p-mo.patch |   44 -
 ...mac-move-p2p-attach-detach-functions.patch |  225 --
 ...p2pdev-is-unregistered-upon-driver-u.patch |   63 -
 ...-fix-double-free-of-p2pdev-interface.patch |   27 -
 ...ke-brcmf_p2p_detach-call-conditional.patch |   29 -
 ...hy-s-addresses-to-provide-valid-MACs.patch |   67 -
 ...o.c-use-existing-atomic_or-primitive.patch |   45 -
 ...ll-combinations-when-setting-wiphy-s.patch |   46 -
 ...c-correct-interface-combination-info.patch |  204 --
 ...-debugfs-entry-for-msgbuf-statistics.patch |   87 -
 ...e-use-of-cfg80211_check_combinations.patch |   83 -
 ...he-correct-flowring-when-backup-queu.patch |   48 -
 ...ghest-event-number-for-4339-firmware.patch |   52 -
 ...onsolidate-ifp-lookup-in-driver-core.patch |  138 -
 ...cmf_proto_hdrpull-return-struct-brcm.patch |  222 --
 ...parameters-for-brcmf_remove_interfac.patch |   87 -
 ...ll-brcmf_cfg80211_detach-when-attach.patch |   92 -
 ...-detection-of-p2pdev-interface-event.patch |  105 -
 ...mf_get_ifp-to-map-ifidx-to-struct-br.patch |  126 -
 ...ruct-brcmf_if-instance-in-brcmf_txfi.patch |  122 -
 ...ping-for-interface-index-to-bsscfg-i.patch |   92 -
 ...icated-debug-level-for-firmware-cons.patch |  103 -
 ...ifidx-parameter-from-brcmf_fws_txsta.patch |   34 -
 ...ange-prototype-for-brcmf_fws_hdrpull.patch |   97 -
 ...-introduce-brcmf_net_detach-function.patch |   99 -
 ...Reset-PCIE-devices-after-recognition.patch |  193 --
 ...elated-firmware-crashes-on-multiple-.patch |   24 -
 ...k-declare-required-extra-tx-headroom.patch |   22 -
 ...ize-tid-field-in-struct-ieee80211_tx.patch |   21 -
 ...0001-brcmfmac-Fix-exception-handling.patch |   24 -
 ...-support-for-the-BCM4350-PCIE-device.patch |   81 -
 ...c-Fix-set-and-get-tx-power-functions.patch |  218 --
 ...ssign-primary-netdev-to-if2bss-array.patch |   73 -
 ...m-p2p-module-about-p2pon-through-API.patch |  113 -
 ...mfmac-Fix-bug-in-flowring-management.patch |   26 -
 ...-p2pon-module-param-always-available.patch |   29 -
 ...und-in-change-vif-for-wpa_supplicant.patch |   76 -
 ...ting-of-p2p-device-is-leaking-memory.patch |  124 -
 ...ndle-p2p_stop_device-if-vif-is-valid.patch |   40 -
 ...fmac-Fix-p2p-bug-for-older-firmwares.patch |   35 -
 ...module-parameter-to-disable-features.patch |   54 -
 ...e-condition-bug-when-deleting-p2p-in.patch |   80 -
 ...port-for-the-BCM4365-and-BCM4366-PCI.patch |  277 --
 ...S-setup-by-properly-handling-p2p-noi.patch |  120 -
 ...events-when-TDLS-is-used-in-combinat.patch |   29 -
 .../371-brcmfmac-include-linux-atomic.h.patch |   23 -
 ...device-memory-to-devcoredump-subsyst.patch |  347 ---
 ...e-condition-between-USB-probe-load-a.patch |  108 -
 ...firmware_path-to-alternative_fw_path.patch |   28 -
 ...cmfmac-remove-conversational-comment.patch |   25 -
 ...p2p-attach-use-single-method-for-p2p.patch |  226 --
 ...ac-Fix-station-info-rate-information.patch |   36 -
 ...-Add-RSSI-information-to-get_station.patch |   50 -
 ...dump_station-support-to-cfg80221-ops.patch |  107 -
 ...cmf_c_preinit_dcmds-prototype-to-cor.patch |   42 -
 ...fmac-Remove-unused-state-AP-creating.patch |   55 -
 ...Properly-set-carrier-state-of-netdev.patch |  122 -
 ...3-brcm80211-Add-support-for-brcm4371.patch |   78 -
 ...port-for-the-BCM4359-11ac-RSDB-PCIE-.patch |   78 -
 ...mplify-and-fix-usage-of-brcmf_ifname.patch |  110 -
 ...ve-unnecessary-check-from-start_xmit.patch |   32 -
 ...ve-unncessary-variable-irq_requested.patch |   49 -
 ...-brcmfmac-Disable-runtime-pm-for-USB.patch |   26 -
 .../374-0006-brcmfmac-Add-RSDB-support.patch  |   65 -
 ...-Use-consistent-naming-for-bsscfgidx.patch |  533 ----
 ...ew-methods-for-pcie-Power-Management.patch |  163 --
 ...fmac-Add-wowl-wake-indication-report.patch |  129 -
 ...ac-constify-brcmf_bus_ops-structures.patch |   57 -
 ...6-0001-brcmfmac-Cleanup-ssid-storage.patch |  251 --
 ...brcmfmac-Return-actual-error-by-fwil.patch |   31 -
 ...hange-error-print-on-wlan0-existence.patch |   41 -
 ...-retries-on-rxglom-superframe-errors.patch |   76 -
 ...redundant-parameter-action-from-scan.patch |  108 -
 ...cmfmac-Cleanup-roaming-configuration.patch |  180 --
 ...007-brcmfmac-Add-beamforming-support.patch |  115 -
 ...net_ratelimit-is-declared-before-use.patch |   25 -
 ...ethods-to-define-and-map-firmware-fi.patch |  664 -----
 ...ble-free-on-exception-at-module-load.patch |   22 -
 ...ck-and-unlock-fws-if-fws-is-not-null.patch |   30 -
 .../patches/400-ath_move_debug_code.patch     |    2 +-
 .../patches/402-ath_regd_optional.patch       |    8 +-
 .../patches/404-regd_no_assoc_hints.patch     |    6 +-
 .../410-ath9k_allow_adhoc_and_ap.patch        |    2 +-
 .../440-ath5k_channel_bw_debugfs.patch        |    2 +-
 .../510-ath9k_intr_mitigation_tweak.patch     |    6 +-
 .../patches/511-ath9k_reduce_rxbuf.patch      |    2 +-
 .../patches/513-ath9k_add_pci_ids.patch       |    2 +-
 .../522-mac80211_configure_antenna_gain.patch |   38 +-
 .../patches/530-ath9k_extra_leds.patch        |   10 +-
 .../531-ath9k_extra_platform_leds.patch       |    2 +-
 ..._get_led_polarity_from_platform_data.patch |   20 +
 .../patches/542-ath9k_debugfs_diag.patch      |   10 +-
 .../patches/543-ath9k_entropy_from_adc.patch  |   18 +-
 ...544-ath9k-ar933x-usb-hang-workaround.patch |   10 +-
 .../patches/545-ath9k_ani_ws_detect.patch     |    6 +-
 ...-move-rt2800_drv_data-declaration-in.patch |   54 +-
 ...-introduce-RT2800_HAS_HIGH_SHARED_ME.patch |   28 +-
 ...t2800-serialize-shared-memory-access.patch |   78 +-
 ...0lib-fix-beacon-generation-on-RT3593.patch |   12 +-
 ...-add-hw_beacon_count-field-to-struct.patch |   22 +-
 ...-init-additional-beacon-offset-regis.patch |   14 +-
 ...-fix-max-supported-beacon-count-for-.patch |    8 +-
 ...to-build-rt2800soc-module-for-RT3883.patch |    6 +-
 ...-rt2800lib-enable-support-for-RT3883.patch |    8 +-
 ...x00-rt2800lib-add-rf_vals-for-RF3853.patch |   16 +-
 ...ib-enable-VCO-calibration-for-RF3853.patch |   10 +-
 ...-add-channel-configuration-function-.patch |   10 +-
 ...2x00-rt2800lib-enable-RF3853-support.patch |    8 +-
 ...-add-MAC-register-initialization-for.patch |   18 +-
 ...-fix-rt2800soc_disable_radio-for-RT3.patch |    6 +-
 ...-add-BBP-register-initialization-for.patch |   10 +-
 ...-add-RFCSR-initialization-for-RT3883.patch |   16 +-
 ...-use-the-extended-EEPROM-map-for-RT3.patch |    6 +-
 ...ib-force-rf-type-to-RF3853-on-RT3883.patch |    8 +-
 ...-add-channel-configuration-code-for-.patch |   18 +-
 ...-fix-txpower_to_dev-function-for-RT3.patch |    8 +-
 ...-use-correct-txpower-calculation-fun.patch |    8 +-
 ...-hardcode-txmixer-gain-values-to-zer.patch |   10 +-
 ...b-use-correct-RT-XWI-size-for-RT3883.patch |    6 +-
 ...b-use-correct-beacon-base-for-RT3883.patch |    6 +-
 ...-use-correct-beacon-count-for-RT3883.patch |    8 +-
 ...-fix-antenna-configuration-for-RT388.patch |    8 +-
 ...-fix-LNA-gain-configuration-for-RT38.patch |   10 +-
 ...0-rt2800lib-fix-VGC-setup-for-RT3883.patch |   12 +-
 ...-fix-EEPROM-LNA-validation-for-RT388.patch |   12 +-
 ...-fix-txpower-compensation-for-RT3883.patch |    8 +-
 ...-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch |    8 +-
 ...-use-high-memory-for-beacons-on-RT38.patch |    6 +-
 ...o-add-a-workaround-for-spurious-TX_F.patch |   14 +-
 .../patches/601-rt2x00-set_pci_mwi.patch      |    4 +-
 ...2-rt2x00-introduce-rt2x00_platform_h.patch |    4 +-
 .../603-rt2x00-introduce-rt2x00eeprom.patch   |   54 +-
 .../604-rt2x00-of_load_eeprom_filename.patch  |    4 +-
 ...om-on-SoC-from-a-mtd-device-defines-.patch |   14 +-
 ...isabling_bands_through_platform_data.patch |   10 +-
 .../608-add_platform_data_mac_addr.patch      |   14 +-
 ...00-allow_disabling_bands_through_dts.patch |    4 +-
 .../610-rt2x00-fix-rt3352-ext-pa.patch        |   28 +-
 .../611-rt2x00-rf_vals-rt3352-xtal20.patch    |   20 +-
 ...c-loadable-via-OF-on-rt288x-305x-SoC.patch |    6 +-
 .../patches/615-rt2x00-fix_20mhz_clk.patch    |    6 +-
 .../patches/616-rt2x00-support-rt5350.patch   |   48 +-
 ...9-rt2x00-change-led-polarity-from-OF.patch |   10 +-
 .../620-rt2x00-add-AP+STA-support.patch       |    6 +-
 .../patches/620-rt2x00-rt3352-rf-id.patch     |    6 +-
 .../patches/621-rt2x00-ht20_40_fix.patch      |   10 +-
 .../622-rt2x00-fix-beacon-bit-balance.patch   |   47 +
 ...700-mwl8k-missing-pci-id-for-WNR854T.patch |    6 +-
 .../801-libertas-configure-sysfs-links.patch  |    8 +-
 .../802-libertas-set-wireless-macaddr.patch   |    4 +-
 .../patches/804-b43-sync-with-bcma.patch      |   17 +
 .../805-b43-gpio-mask-module-option.patch     |   10 +-
 .../mac80211/patches/810-b43_no_pio.patch     |   18 +-
 .../patches/820-b43-add-antenna-control.patch |   22 +-
 .../841-b43-reduce-number-of-RX-slots.patch   |    4 +-
 .../845-b43-only-use-gpio-0-1-for-led.patch   |    4 +-
 ...847-b43-always-take-overlapping-devs.patch |    6 +-
 ...-remove-extra-regulation-restriction.patch |    4 +-
 ...e-bcm47xx-platform-NVRAM-as-fallback.patch |   80 -
 ...-register-wiphy-s-during-module_init.patch |   43 +-
 ...und-bug-with-some-inconsistent-BSSes.patch |    6 +-
 ...ore-Add-support-for-DT-platform-data.patch |  139 -
 ...0-rt2x00-enable-rt2800soc-for-mt7620.patch |    4 +-
 .../910-01-add-support-for-mt7620.patch       |   49 +-
 ...ack_to_board_bin_on_empty_otp_stream.patch |   20 -
 ...21-ath10k_init_devices_synchronously.patch |    2 +-
 .../930-ath10k_add_tpt_led_trigger.patch      |    4 +-
 ...940-mwl8k_init_devices_synchronously.patch |   20 +
 package/kernel/mt76/Makefile                  |   10 +-
 .../001-backport_ieee80211_hw_set.patch       |   12 -
 .../mt76/patches/002-disable_fast_xmit.patch  |   10 -
 .../mwlwifi/patches/100-drop_old_api.patch    |   92 +
 .../kernel/mwlwifi/patches/110-api_sync.patch |   19 +
 .../files/include/linux/ath9k_platform.h      |    1 +
 .../patches-3.18/032-bcma-from-4.6.patch      |  416 ++-
 333 files changed, 6254 insertions(+), 20929 deletions(-)
 create mode 100644 package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch
 delete mode 100644 package/kernel/mac80211/patches/004-backports_debugfs_fix.patch
 create mode 100644 package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch
 delete mode 100644 package/kernel/mac80211/patches/008-fix_netdev_unregister.patch
 delete mode 100644 package/kernel/mac80211/patches/020-add_mpls_h.patch
 delete mode 100644 package/kernel/mac80211/patches/045-bcma-from-4.1.patch
 delete mode 100644 package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch
 create mode 100644 package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
 delete mode 100644 package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch
 rename package/kernel/mac80211/patches/{356-ath9k-force-rx_clear-when-disabling-rx.patch => 300-ath9k-force-rx_clear-when-disabling-rx.patch} (100%)
 delete mode 100644 package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch
 create mode 100644 package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch
 delete mode 100644 package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch
 delete mode 100644 package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch
 create mode 100644 package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch
 delete mode 100644 package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch
 create mode 100644 package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch
 delete mode 100644 package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch
 create mode 100644 package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch
 delete mode 100644 package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch
 create mode 100644 package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch
 delete mode 100644 package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch
 create mode 100644 package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch
 create mode 100644 package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch
 delete mode 100644 package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch
 create mode 100644 package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch
 delete mode 100644 package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch
 create mode 100644 package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch
 create mode 100644 package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch
 delete mode 100644 package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch
 create mode 100644 package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch
 delete mode 100644 package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch
 create mode 100644 package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch
 delete mode 100644 package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch
 delete mode 100644 package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch
 create mode 100644 package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch
 delete mode 100644 package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch
 create mode 100644 package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch
 create mode 100644 package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch
 delete mode 100644 package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch
 delete mode 100644 package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch
 create mode 100644 package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch
 delete mode 100644 package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch
 create mode 100644 package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch
 delete mode 100644 package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch
 create mode 100644 package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch
 delete mode 100644 package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch
 create mode 100644 package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch
 delete mode 100644 package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch
 create mode 100644 package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch
 delete mode 100644 package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch
 create mode 100644 package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch
 delete mode 100644 package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch
 create mode 100644 package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch
 delete mode 100644 package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch
 create mode 100644 package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch
 rename package/kernel/mac80211/patches/{863-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch => 323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch} (83%)
 create mode 100644 package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch
 create mode 100644 package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch
 create mode 100644 package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch
 create mode 100644 package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch
 create mode 100644 package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch
 delete mode 100644 package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch
 delete mode 100644 package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch
 create mode 100644 package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch
 delete mode 100644 package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch
 create mode 100644 package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch
 create mode 100644 package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch
 delete mode 100644 package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch
 delete mode 100644 package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch
 create mode 100644 package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch
 delete mode 100644 package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch
 create mode 100644 package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch
 delete mode 100644 package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch
 create mode 100644 package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch
 delete mode 100644 package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch
 create mode 100644 package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch
 delete mode 100644 package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch
 create mode 100644 package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch
 delete mode 100644 package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch
 create mode 100644 package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch
 delete mode 100644 package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch
 create mode 100644 package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch
 delete mode 100644 package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch
 create mode 100644 package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch
 delete mode 100644 package/kernel/mac80211/patches/335-0001-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch
 delete mode 100644 package/kernel/mac80211/patches/335-0002-brcmfmac-Simplify-watchdog-sleep.patch
 delete mode 100644 package/kernel/mac80211/patches/335-0003-brcmfmac-Fix-possible-race-condition.patch
 delete mode 100644 package/kernel/mac80211/patches/335-0004-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch
 create mode 100644 package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch
 delete mode 100644 package/kernel/mac80211/patches/336-0001-brcmfmac-remove-duplication-of-ramsize-info.patch
 delete mode 100644 package/kernel/mac80211/patches/336-0002-brcmfmac-always-perform-cores-checks.patch
 delete mode 100644 package/kernel/mac80211/patches/336-0003-brcmfmac-rename-chip-download-functions.patch
 delete mode 100644 package/kernel/mac80211/patches/336-0004-brcmfmac-assure-device-is-ready-for-download-after-b.patch
 delete mode 100644 package/kernel/mac80211/patches/336-0005-brcmfmac-extract-ram-size-info-from-internal-memory-.patch
 delete mode 100644 package/kernel/mac80211/patches/336-0006-brcmfmac-take-save-restore-memory-into-account-for-S.patch
 delete mode 100644 package/kernel/mac80211/patches/336-0007-brcmfmac-fix-watchdog-timer-regression.patch
 create mode 100644 package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch
 delete mode 100644 package/kernel/mac80211/patches/337-0001-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch
 delete mode 100644 package/kernel/mac80211/patches/337-0002-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch
 delete mode 100644 package/kernel/mac80211/patches/337-0003-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch
 delete mode 100644 package/kernel/mac80211/patches/337-0004-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch
 delete mode 100644 package/kernel/mac80211/patches/337-0005-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch
 delete mode 100644 package/kernel/mac80211/patches/337-0006-brcmfmac-only-support-the-BCM43455-7-device.patch
 delete mode 100644 package/kernel/mac80211/patches/337-0007-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch
 create mode 100644 package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch
 delete mode 100644 package/kernel/mac80211/patches/338-brcmfmac-disable-MBSS-feature-for-BCM43362.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0001-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0002-brcmfmac-update-wiphy-band-information-upon-updating.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0003-brcmfmac-add-description-for-feature-flags.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0004-brcmfmac-make-scheduled-scan-support-conditional.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0005-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0006-brcmfmac-process-interrupt-regardless-sdiod-state.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0007-brcmfmac-fix-sdio-suspend-and-resume.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0008-brcmfmac-add-support-for-BCM4358-PCIe-device.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0009-brcmfmac-add-additional-43602-pcie-device-id.patch
 delete mode 100644 package/kernel/mac80211/patches/339-0010-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch
 delete mode 100644 package/kernel/mac80211/patches/340-brcmfmac-cleanup-a-sizeof.patch
 delete mode 100644 package/kernel/mac80211/patches/341-brcmfmac-check-result-of-USB-firmware-request.patch
 delete mode 100644 package/kernel/mac80211/patches/342-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch
 delete mode 100644 package/kernel/mac80211/patches/343-brcmfmac-avoid-gcc-5.1-warning.patch
 delete mode 100644 package/kernel/mac80211/patches/344-0001-brcmfmac-allow-device-tree-node-without-interrupts-p.patch
 delete mode 100644 package/kernel/mac80211/patches/344-0002-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch
 delete mode 100644 package/kernel/mac80211/patches/344-0003-brcmfmac-remove-pci-shared-structure-rev4-support.patch
 delete mode 100644 package/kernel/mac80211/patches/344-0004-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch
 delete mode 100644 package/kernel/mac80211/patches/344-0005-brcmfmac-add-support-for-dma-indices-feature.patch
 delete mode 100644 package/kernel/mac80211/patches/345-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch
 delete mode 100644 package/kernel/mac80211/patches/346-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch
 delete mode 100644 package/kernel/mac80211/patches/347-brcmfmac-simplify-check-stripping-v2-NVRAM.patch
 delete mode 100644 package/kernel/mac80211/patches/348-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch
 delete mode 100644 package/kernel/mac80211/patches/349-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch
 delete mode 100644 package/kernel/mac80211/patches/350-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch
 delete mode 100644 package/kernel/mac80211/patches/351-ath9k-fix-DMA-stop-sequence-for-AR9003.patch
 delete mode 100644 package/kernel/mac80211/patches/352-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch
 delete mode 100644 package/kernel/mac80211/patches/353-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch
 delete mode 100644 package/kernel/mac80211/patches/354-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch
 delete mode 100644 package/kernel/mac80211/patches/355-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch
 delete mode 100644 package/kernel/mac80211/patches/357-0001-brcmfmac-Update-msgbuf-read-pointer-quicker.patch
 delete mode 100644 package/kernel/mac80211/patches/357-0002-brcmfmac-remove-chipinfo-debugfs-entry.patch
 delete mode 100644 package/kernel/mac80211/patches/357-0003-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch
 delete mode 100644 package/kernel/mac80211/patches/357-0004-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch
 delete mode 100644 package/kernel/mac80211/patches/358-ath9k_hw-fix-device-ID-check-for-AR956x.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0001-brcmfmac-Check-if-firmware-supports-p2p.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0003-brcmfmac-rework-.get_station-callback.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0007-brcmfmac-move-p2p-attach-detach-functions.patch
 delete mode 100644 package/kernel/mac80211/patches/359-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch
 delete mode 100644 package/kernel/mac80211/patches/360-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch
 delete mode 100644 package/kernel/mac80211/patches/360-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch
 delete mode 100644 package/kernel/mac80211/patches/361-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch
 delete mode 100644 package/kernel/mac80211/patches/362-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch
 delete mode 100644 package/kernel/mac80211/patches/363-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch
 delete mode 100644 package/kernel/mac80211/patches/363-0002-brcmfmac-correct-interface-combination-info.patch
 delete mode 100644 package/kernel/mac80211/patches/363-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch
 delete mode 100644 package/kernel/mac80211/patches/363-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch
 delete mode 100644 package/kernel/mac80211/patches/363-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch
 delete mode 100644 package/kernel/mac80211/patches/363-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch
 delete mode 100644 package/kernel/mac80211/patches/365-0012-brcmfmac-introduce-brcmf_net_detach-function.patch
 delete mode 100644 package/kernel/mac80211/patches/366-brcmfmac-Reset-PCIE-devices-after-recognition.patch
 delete mode 100644 package/kernel/mac80211/patches/367-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch
 delete mode 100644 package/kernel/mac80211/patches/368-ath9k-declare-required-extra-tx-headroom.patch
 delete mode 100644 package/kernel/mac80211/patches/369-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0001-brcmfmac-Fix-exception-handling.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0002-brcmfmac-Add-support-for-the-BCM4350-PCIE-device.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0003-brcmfmac-Fix-set-and-get-tx-power-functions.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0004-brcmfmac-Only-assign-primary-netdev-to-if2bss-array.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0005-brcmfmac-Inform-p2p-module-about-p2pon-through-API.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0006-brcmfmac-Fix-bug-in-flowring-management.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0007-brcmfmac-Make-p2pon-module-param-always-available.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0008-brcmfmac-Workaround-in-change-vif-for-wpa_supplicant.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0009-brcmfmac-Deleting-of-p2p-device-is-leaking-memory.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0010-brcmfmac-Only-handle-p2p_stop_device-if-vif-is-valid.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0011-brcmfmac-Fix-p2p-bug-for-older-firmwares.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0012-brcmfmac-Add-module-parameter-to-disable-features.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0013-brcmfmac-Fix-race-condition-bug-when-deleting-p2p-in.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0014-brcmfmac-Add-support-for-the-BCM4365-and-BCM4366-PCI.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0015-brcmfmac-Fix-TDLS-setup-by-properly-handling-p2p-noi.patch
 delete mode 100644 package/kernel/mac80211/patches/370-0016-brcmfmac-Accept-events-when-TDLS-is-used-in-combinat.patch
 delete mode 100644 package/kernel/mac80211/patches/371-brcmfmac-include-linux-atomic.h.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0001-brcmfmac-expose-device-memory-to-devcoredump-subsyst.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0002-brcmfmac-Fix-race-condition-between-USB-probe-load-a.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0003-brcmfmac-rename-firmware_path-to-alternative_fw_path.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0004-brcmfmac-remove-conversational-comment.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0005-brcmfmac-Rework-p2p-attach-use-single-method-for-p2p.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0006-brcmfmac-Fix-station-info-rate-information.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0007-brcmfmac-Add-RSSI-information-to-get_station.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0008-brcmfmac-Add-dump_station-support-to-cfg80221-ops.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0009-brcmfmac-Move-brcmf_c_preinit_dcmds-prototype-to-cor.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0010-brcmfmac-Remove-unused-state-AP-creating.patch
 delete mode 100644 package/kernel/mac80211/patches/372-0011-brcmfmac-Properly-set-carrier-state-of-netdev.patch
 delete mode 100644 package/kernel/mac80211/patches/373-brcm80211-Add-support-for-brcm4371.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0001-brcmfmac-Add-support-for-the-BCM4359-11ac-RSDB-PCIE-.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0002-brcmfmac-Simplify-and-fix-usage-of-brcmf_ifname.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0003-brcmfmac-Remove-unnecessary-check-from-start_xmit.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0004-brcmfmac-Remove-unncessary-variable-irq_requested.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0005-brcmfmac-Disable-runtime-pm-for-USB.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0006-brcmfmac-Add-RSDB-support.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0007-brcmfmac-Use-consistent-naming-for-bsscfgidx.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0008-brcmfmac-Use-new-methods-for-pcie-Power-Management.patch
 delete mode 100644 package/kernel/mac80211/patches/374-0009-brcmfmac-Add-wowl-wake-indication-report.patch
 delete mode 100644 package/kernel/mac80211/patches/375-brcmfmac-constify-brcmf_bus_ops-structures.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0001-brcmfmac-Cleanup-ssid-storage.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0002-brcmfmac-Return-actual-error-by-fwil.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0003-brcmfmac-Change-error-print-on-wlan0-existence.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0004-brcmfmac-no-retries-on-rxglom-superframe-errors.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0005-brcmfmac-Remove-redundant-parameter-action-from-scan.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0006-brcmfmac-Cleanup-roaming-configuration.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0007-brcmfmac-Add-beamforming-support.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0008-brcmfmac-assure-net_ratelimit-is-declared-before-use.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0009-brcmfmac-Unify-methods-to-define-and-map-firmware-fi.patch
 delete mode 100644 package/kernel/mac80211/patches/376-0010-brcmfmac-Fix-double-free-on-exception-at-module-load.patch
 delete mode 100644 package/kernel/mac80211/patches/377-brcmfmac-only-lock-and-unlock-fws-if-fws-is-not-null.patch
 create mode 100644 package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch
 create mode 100644 package/kernel/mac80211/patches/622-rt2x00-fix-beacon-bit-balance.patch
 create mode 100644 package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch
 delete mode 100644 package/kernel/mac80211/patches/860-brcmfmac-use-bcm47xx-platform-NVRAM-as-fallback.patch
 delete mode 100644 package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch
 delete mode 100644 package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch
 create mode 100644 package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
 delete mode 100644 package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch
 delete mode 100644 package/kernel/mt76/patches/002-disable_fast_xmit.patch
 create mode 100644 package/kernel/mwlwifi/patches/100-drop_old_api.patch
 create mode 100644 package/kernel/mwlwifi/patches/110-api_sync.patch

diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile
index a1eedce014..30da1cfe25 100644
--- a/package/kernel/mac80211/Makefile
+++ b/package/kernel/mac80211/Makefile
@@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=2015-03-09
-PKG_RELEASE:=3
+PKG_VERSION:=2016-01-10
+PKG_RELEASE:=1
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
 PKG_BACKPORT_VERSION:=
-PKG_MD5SUM:=6d4b04e4ce8a1f54dabfb04f4709453c
+PKG_MD5SUM:=be5fae2e8d6f7490f9b073374fb895ba
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
@@ -23,15 +23,29 @@ PKG_BUILD_PARALLEL:=1
 PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
 
 PKG_DRIVERS = \
-	adm8211 ath5k libertas-usb libertas-sdio p54-common p54-pci p54-usb p54-spi \
-	rt2x00-lib rt2x00-pci rt2x00-usb rt2800-lib rt2400-pci rt2500-pci \
-	rt2500-usb rt61-pci rt73-usb rt2800-mmio rt2800-pci rt2800-usb rt2800-soc \
-	rtl8180 rtl8187 zd1211rw mac80211-hwsim carl9170 b43 b43legacy \
-	ath9k-common ath9k ath9k-htc ath10k ath net-libipw net-ipw2100 net-ipw2200 \
-	mwl8k mwifiex-pcie net-hermes net-hermes-pci net-hermes-plx net-hermes-pcmcia \
-	iwl-legacy iwl3945 iwl4965 iwlagn wlcore wl12xx wl18xx lib80211 \
+	adm8211 \
+	ath ath5k ath9k ath9k-common ath9k-htc ath10k \
+	b43 b43legacy \
+	carl9170 \
+	hermes hermes-pci hermes-pcmcia hermes-plx\
+	iwl-legacy iwl3945 iwl4965 iwlwifi \
+	lib80211 \
+	libipw ipw2100 ipw2200 \
+	libertas-sdio libertas-usb libertas-spi \
+	mac80211-hwsim \
+	mt7601u \
+	mwl8k mwifiex-pcie \
+	p54-common p54-pci p54-spi p54-usb \
+	rt2x00-lib rt2x00-pci rt2x00-usb \
+	rt2400-pci rt2500-pci rt2500-usb \
+	rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \
+	rt61-pci rt73-usb \
+	rtl8180 rtl8187 \
 	rtlwifi rtlwifi-pci rtlwifi-usb rtl8192c-common rtl8192ce rtl8192se \
-	rtl8192de rtl8192cu
+	rtl8192de rtl8192cu \
+	rtl8xxxu \
+	wlcore wl12xx wl18xx \
+	zd1211rw
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_PACKAGE_kmod-mac80211 \
@@ -60,7 +74,6 @@ define KernelPackage/mac80211/Default
   SUBMENU:=$(WMENU)
   URL:=https://wireless.wiki.kernel.org/
   MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-  DEPENDS:=@!TARGET_uml
 endef
 
 define KernelPackage/cfg80211
@@ -79,7 +92,7 @@ endef
 define KernelPackage/mac80211
   $(call KernelPackage/mac80211/Default)
   TITLE:=Linux 802.11 Wireless Networking Stack
-  DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211 +hostapd-common
+  DEPENDS+= +kmod-cfg80211 +hostapd-common +kmod-crypto-core +kmod-crypto-arc4
   KCONFIG:=\
 	CONFIG_AVERAGE=y
   FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko
@@ -97,6 +110,15 @@ define KernelPackage/mac80211/config
 		  Select this to see extensive information about
 		  the internal state of mac80211 in debugfs.
 
+	config PACKAGE_MAC80211_TRACING
+		bool "Enable tracing (mac80211 and supported drivers)"
+		select KERNEL_FTRACE
+		select KERNEL_ENABLE_DEFAULT_TRACERS
+		default n
+		help
+		  Select this to enable tracing of mac80211 and
+		  related wifi drivers (using trace-cmd).
+
 	config PACKAGE_MAC80211_MESH
 		bool "Enable 802.11s mesh support"
 		default y
@@ -108,833 +130,703 @@ define KernelPackage/mac80211/description
 Generic IEEE 802.11 Networking Stack (mac80211)
 endef
 
-PKG_LINUX_FIRMWARE_NAME:=linux-firmware
-PKG_LINUX_FIRMWARE_VERSION:=f404336ba808cbd57547196e13367079a23b822c
-PKG_LINUX_FIRMWARE_SOURCE:=$(PKG_LINUX_FIRMWARE_NAME)-2015-03-20-$(PKG_LINUX_FIRMWARE_VERSION).tar.bz2
-PKG_LINUX_FIRMWARE_PROTO:=git
-PKG_LINUX_FIRMWARE_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
-PKG_LINUX_FIRMWARE_SUBDIR:=$(PKG_LINUX_FIRMWARE_NAME)-$(PKG_LINUX_FIRMWARE_VERSION)
-#PKG_LINUX_FIRMWARE_MIRROR_MD5SUM:=e219333f01835c6e556875a9e0deb3f9
-
-define Download/linux-firmware
-  FILE:=$(PKG_LINUX_FIRMWARE_SOURCE)
-  URL:=$(PKG_LINUX_FIRMWARE_SOURCE_URL)
-  MD5SUM:=$(PKG_LINUX_FIRMWARE_MD5SUM)
-  PROTO:=$(PKG_LINUX_FIRMWARE_PROTO)
-  VERSION:=$(PKG_LINUX_FIRMWARE_VERSION)
-  SUBDIR:=$(PKG_LINUX_FIRMWARE_SUBDIR)
-  MIRROR_MD5SUM:=$(PKG_LINUX_FIRMWARE_MIRROR_MD5SUM)
-endef
-$(eval $(call Download,linux-firmware))
-
-PKG_ATH10K_LINUX_FIRMWARE_NAME:=ath10k-firmware
-PKG_ATH10K_LINUX_FIRMWARE_VERSION:=da0f85d924226ee30c46e037120621c9e192b39e
-PKG_ATH10K_LINUX_FIRMWARE_SOURCE:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION).tar.bz2
-PKG_ATH10K_LINUX_FIRMWARE_PROTO:=git
-PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git
-PKG_ATH10K_LINUX_FIRMWARE_SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION)
-#PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM:=?
-
-define Download/ath10k-firmware
-  FILE:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE)
-  URL:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL)
-  PROTO:=$(PKG_ATH10K_LINUX_FIRMWARE_PROTO)
-  VERSION:=$(PKG_ATH10K_LINUX_FIRMWARE_VERSION)
-  SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)
-  #MIRROR_MD5SUM:=$(PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM)
-endef
-$(eval $(call Download,ath10k-firmware))
-
-# Prism54 drivers
-P54PCIFW:=2.13.12.0.arm
-P54USBFW:=2.13.24.0.lm87.arm
-P54SPIFW:=2.13.0.0.a.13.14.arm
-
-define Download/p54usb
-  FILE:=$(P54USBFW)
-  URL:=http://daemonizer.de/prism54/prism54-fw/fw-usb
-  MD5SUM:=8e8ab005a4f8f0123bcdc51bc25b47f6
-endef
-$(eval $(call Download,p54usb))
-
-define Download/p54pci
-  FILE:=$(P54PCIFW)
-  URL:=http://daemonizer.de/prism54/prism54-fw/fw-softmac
-  MD5SUM:=ff7536af2092b1c4b21315bd103ef4c4
-endef
-$(eval $(call Download,p54pci))
-
-define Download/p54spi
-  FILE:=$(P54SPIFW)
-  URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560
-  MD5SUM:=42661f8ecbadd88012807493f596081d
-endef
-$(eval $(call Download,p54spi))
-
-define KernelPackage/p54/Default
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Prism54 Drivers
-endef
-
-define KernelPackage/p54/description
-  Kernel module for Prism54 chipsets (mac80211)
-endef
-
-define KernelPackage/p54-common
-  $(call KernelPackage/p54/Default)
-  DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt
-  TITLE+= (COMMON)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.ko
-endef
-
-define KernelPackage/p54-pci
-  $(call KernelPackage/p54/Default)
-  TITLE+= (PCI)
-  DEPENDS+= @PCI_SUPPORT +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.ko
-  AUTOLOAD:=$(call AutoProbe,p54pci)
-endef
-
-define KernelPackage/p54-usb
-  $(call KernelPackage/p54/Default)
-  TITLE+= (USB)
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.ko
-  AUTOLOAD:=$(call AutoProbe,p54usb)
-endef
-
-define KernelPackage/p54-spi
-  $(call KernelPackage/p54/Default)
-  TITLE+= (SPI)
-  DEPENDS+= @TARGET_omap24xx +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54spi.ko
-  AUTOLOAD:=$(call AutoProbe,p54spi)
-endef
-
-define KernelPackage/rt2x00/Default
+define KernelPackage/adm8211
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Ralink Drivers for RT2x00 cards
+  TITLE:=ADMTek 8211 support
+  DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/admtek/adm8211.ko
+  AUTOLOAD:=$(call AutoProbe,adm8211)
 endef
 
-define KernelPackage/rt2x00-lib
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t
-  TITLE+= (LIB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.ko
-  MENU:=1
-endef
+define KernelPackage/ath/config
+  if PACKAGE_kmod-ath
+	config ATH_USER_REGD
+		bool "Force Atheros drivers to respect the user's regdomain settings"
+		help
+		  Atheros' idea of regulatory handling is that the EEPROM of the card defines
+		  the regulatory limits and the user is only allowed to restrict the settings
+		  even further, even if the country allows frequencies or power levels that
+		  are forbidden by the EEPROM settings.
 
-define KernelPackage/rt2x00-lib/config
-  if PACKAGE_kmod-rt2x00-lib
+		  Select this option if you want the driver to respect the user's decision about
+		  regulatory settings.
 
-	config PACKAGE_RT2X00_LIB_DEBUGFS
-		bool "Enable rt2x00 debugfs support"
-		depends on PACKAGE_MAC80211_DEBUGFS
+	config PACKAGE_ATH_DEBUG
+		bool "Atheros wireless debugging"
 		help
-		  Enable creation of debugfs files for the rt2x00 drivers.
-		  These debugfs files support both reading and writing of the
-		  most important register types of the rt2x00 hardware.
+		  Say Y, if you want to debug atheros wireless drivers.
+		  Only ath9k & ath10k make use of this.
 
-	config PACKAGE_RT2X00_DEBUG
-		bool "Enable rt2x00 debug output"
+	config PACKAGE_ATH_DFS
+		bool "Enable DFS support"
+		default y
 		help
-		  Enable debugging output for all rt2x00 modules
+		  Dynamic frequency selection (DFS) is required for most of the 5 GHz band
+		  channels in Europe, US, and Japan.
 
-  endif
-endef
+		  Select this option if you want to use such channels.
 
-define KernelPackage/rt2x00-mmio
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6
-  HIDDEN:=1
-  TITLE+= (MMIO)
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00mmio.ko
+  endif
 endef
 
-define KernelPackage/rt2x00-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib
-  HIDDEN:=1
-  TITLE+= (PCI)
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2x00pci)
+define KernelPackage/ath
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros common driver part
+  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath25 +kmod-mac80211
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
+  MENU:=1
 endef
 
-define KernelPackage/rt2x00-usb
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core
-  HIDDEN:=1
-  TITLE+= (USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt2x00usb)
+define KernelPackage/ath/description
+ This module contains some common parts needed by Atheros Wireless drivers.
 endef
 
-define KernelPackage/rt2800-lib
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT
-  HIDDEN:=1
-  TITLE+= (rt2800 LIB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.ko
+define KernelPackage/ath5k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 5xxx wireless cards support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
+  DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
+  AUTOLOAD:=$(call AutoProbe,ath5k)
 endef
 
-define KernelPackage/rt2400-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
-  TITLE+= (RT2400 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2400pci)
+define KernelPackage/ath5k/description
+ This module adds support for wireless adapters based on
+ Atheros 5xxx chipset.
 endef
 
-define KernelPackage/rt2500-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
-  TITLE+= (RT2500 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2500pci)
+define KernelPackage/ath9k-common
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
 endef
 
-define KernelPackage/rt2500-usb
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
-  TITLE+= (RT2500 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt2500usb)
+define KernelPackage/ath9k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 802.11n PCI wireless cards support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+  DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
+  AUTOLOAD:=$(call AutoProbe,ath9k)
 endef
 
-define KernelPackage/rt61-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
-  TITLE+= (RT2x61 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt61pci)
+define KernelPackage/ath9k/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
 endef
 
-define KernelPackage/rt73-usb
-  $(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
-  TITLE+= (RT73 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt73usb)
-endef
+define KernelPackage/ath9k/config
 
-define KernelPackage/rt2800-mmio
-$(call KernelPackage/rt2x00/Default)
-  TITLE += (RT28xx/RT3xxx MMIO)
-  DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio
-  HIDDEN:=1
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800mmio.ko
-endef
+	config ATH9K_SUPPORT_PCOEM
+		bool "Support chips used in PC OEM cards"
+		depends on PACKAGE_kmod-ath9k
 
-define KernelPackage/rt2800-soc
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib
-  TITLE += (RT28xx/RT3xxx SoC)
-  FILES := \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800soc.ko
-  AUTOLOAD:=$(call AutoProbe,rt2800soc)
 endef
 
-define KernelPackage/rt2800-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio
-  TITLE+= (RT2860 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2800pci)
+define KernelPackage/ath9k-htc
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 802.11n USB device support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+  DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
+  AUTOLOAD:=$(call AutoProbe,ath9k_htc)
 endef
 
-define KernelPackage/rt2800-usb
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt
-  TITLE+= (RT2870 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt2800usb)
+define KernelPackage/ath9k-htc/description
+This module adds support for wireless adapters based on
+Atheros USB AR9271 and AR7010 family of chipsets.
 endef
 
-define KernelPackage/rtl818x/Default
+define KernelPackage/ath10k
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek Drivers for RTL818x devices
-  URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187
-  DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211
+  TITLE:=Atheros 802.11ac wireless cards support
+  URL:=https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
+  DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY +ath10k-firmware-qca988x
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
+  AUTOLOAD:=$(call AutoLoad,55,ath10k_core ath10k_pci)
 endef
 
-define KernelPackage/rtl8180
-  $(call KernelPackage/rtl818x/Default)
-  DEPENDS+= @PCI_SUPPORT
-  TITLE+= (RTL8180 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8180/rtl818x_pci.ko
-  AUTOLOAD:=$(call AutoProbe,rtl818x_pci)
+define KernelPackage/ath10k/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11ac family of chipsets. For now only
+PCI is supported.
 endef
 
-define KernelPackage/rtl8187
-$(call KernelPackage/rtl818x/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core
-  TITLE+= (RTL8187 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8187)
-endef
+#Broadcom firmware
+ifneq ($(CONFIG_B43_FW_6_30),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=6.30.163.46
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+  PKG_B43_FWV4_MD5SUM:=6fe97e9368d25342a1ab943d3cf3496d
+else
+ifneq ($(CONFIG_B43_FW_5_10),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=5.10.56.27.3
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+  PKG_B43_FWV4_MD5SUM:=3363e3a6b3d9d73c49dea870c7834eac
+else
+ifneq ($(CONFIG_B43_FW_4_178),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=4.178.10.4
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+  PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb
+else
+ifneq ($(CONFIG_B43_FW_5_100_138),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=5.100.138
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+  PKG_B43_FWV4_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
+else
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=4.150.10.5
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+  PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60
+endif
+endif
+endif
+endif
+ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=5.2
+  PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
+  PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
+  PKG_B43_FWV4_SOURCE_URL:=http://www.ing.unibs.it/openfwwf/firmware/
+  PKG_B43_FWV4_MD5SUM:=e045a135453274e439ae183f8498b0fa
+endif
 
-define KernelPackage/rtlwifi/config
-	config PACKAGE_RTLWIFI_DEBUG
-		bool "Realtek wireless debugging"
-		depends on PACKAGE_kmod-rtlwifi
-		help
-		  Say Y, if you want to debug realtek wireless drivers.
 
+define Download/b43
+  FILE:=$(PKG_B43_FWV4_SOURCE)
+  URL:=$(PKG_B43_FWV4_SOURCE_URL)
+  MD5SUM:=$(PKG_B43_FWV4_MD5SUM)
 endef
+$(eval $(call Download,b43))
 
-define KernelPackage/rtlwifi
+define KernelPackage/b43
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek common driver part
-  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtlwifi.ko
-  HIDDEN:=1
+  TITLE:=Broadcom 43xx wireless support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
+  KCONFIG:= \
+  	CONFIG_HW_RANDOM=y
+  # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
+  DEPENDS += \
+	@PCI_SUPPORT +kmod-mac80211 \
+	$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
+	$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko
+  AUTOLOAD:=$(call AutoProbe,b43)
+  MENU:=1
 endef
 
-define KernelPackage/rtlwifi-pci
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek common driver part (PCI support)
-  DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_pci.ko
-  AUTOLOAD:=$(call AutoProbe,rtl_pci)
-  HIDDEN:=1
-endef
+define KernelPackage/b43/config
 
-define KernelPackage/rtlwifi-usb
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek common driver part (USB support)
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_usb.ko
-  AUTOLOAD:=$(call AutoProbe,rtl_usb)
-  HIDDEN:=1
-endef
+config PACKAGE_B43_USE_SSB
+	select PACKAGE_kmod-ssb
+	tristate
+	depends on !TARGET_brcm47xx && !TARGET_brcm63xx
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
 
-define KernelPackage/rtl8192c-common
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192CE/RTL8192CU common support module
-  DEPENDS+= +kmod-rtlwifi
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192c/rtl8192c-common.ko
-  HIDDEN:=1
-endef
+config PACKAGE_B43_USE_BCMA
+	select PACKAGE_kmod-bcma
+	tristate
+	depends on !TARGET_brcm47xx && !TARGET_bcm53xx
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
 
-define KernelPackage/rtl8192ce
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192CE/RTL8188CE support
-  DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192ce.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192ce)
-endef
+  if PACKAGE_kmod-b43
 
-define KernelPackage/rtl8192ce/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfw.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU_B.bin $(1)/lib/firmware/rtlwifi
-endef
+	choice
+		prompt "b43 firmware version"
+		default B43_FW_5_100_138
+		help
+		  This option allows you to select the version of the b43 firmware.
 
-define KernelPackage/rtl8192se
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192SE/RTL8191SE support
-  DEPENDS+= +kmod-rtlwifi-pci
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192se/rtl8192se.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192se)
-endef
+	config B43_FW_4_150
+		bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
+		help
+		  Old stable firmware for BCM43xx devices.
 
-define KernelPackage/rtl8192se/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192sefw.bin $(1)/lib/firmware/rtlwifi
-endef
+		  If unsure, select this.
 
-define KernelPackage/rtl8192de
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192DE/RTL8188DE support
-  DEPENDS+= +kmod-rtlwifi-pci
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192de)
-endef
+	config B43_FW_4_178
+		bool "Firmware 478.104 from driver 4.178.10.4"
+		help
+		  Older firmware for BCM43xx devices.
 
-define KernelPackage/rtl8192de/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192defw.bin $(1)/lib/firmware/rtlwifi
-endef
+		  If unsure, select the "stable" firmware.
 
-define KernelPackage/rtl8192cu
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192CU/RTL8188CU support
-  DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192cu/rtl8192cu.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192cu)
-endef
+	config B43_FW_5_10
+		bool "Firmware 508.1084 from driver 5.10.56.27"
+		help
+		  Older firmware for BCM43xx devices.
 
-define KernelPackage/rtl8192cu/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_A.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_B.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_TMSC.bin $(1)/lib/firmware/rtlwifi
-endef
+		  If unsure, select the "stable" firmware.
 
-ZD1211FW_NAME:=zd1211-firmware
-ZD1211FW_VERSION:=1.4
-define Download/zd1211rw
-  FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
-  URL:=@SF/zd1211/
-  MD5SUM:=19f28781d76569af8551c9d11294c870
-endef
-$(eval $(call Download,zd1211rw))
+	config B43_FW_5_100_138
+		bool "Firmware 666.2 from driver 5.100.138 (stable)"
+		help
+		  The currently default firmware for BCM43xx devices.
 
-define KernelPackage/zd1211rw
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Zydas ZD1211 support
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.ko
-  AUTOLOAD:=$(call AutoProbe,zd1211rw)
-endef
+		  This firmware currently gets most of the testing and is needed for some N-PHY devices.
 
-define KernelPackage/adm8211
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=ADMTek 8211 support
-  DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/adm8211.ko
-  AUTOLOAD:=$(call AutoProbe,adm8211)
-endef
+		  If unsure, select the this firmware.
 
-define KernelPackage/ath/config
-  if PACKAGE_kmod-ath
-	config ATH_USER_REGD
-		bool "Force Atheros drivers to respect the user's regdomain settings"
+	config B43_FW_6_30
+		bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
 		help
-		  Atheros' idea of regulatory handling is that the EEPROM of the card defines
-		  the regulatory limits and the user is only allowed to restrict the settings
-		  even further, even if the country allows frequencies or power levels that
-		  are forbidden by the EEPROM settings.
+		  Newer experimental firmware for BCM43xx devices.
+
+		  This firmware is mostly untested.
+
+		  If unsure, select the "stable" firmware.
+
+	config B43_OPENFIRMWARE
+		bool "Open FirmWare for WiFi networks"
+		help
+		  Opensource firmware for BCM43xx devices.
+
+		  Do _not_ select this, unless you know what you are doing.
+		  The Opensource firmware is not suitable for embedded devices, yet.
+		  It does not support QoS, which is bad for AccessPoints.
+		  It does not support hardware crypto acceleration, which is a showstopper
+		  for embedded devices with low CPU resources.
+
+		  If unsure, select the "stable" firmware.
+
+	endchoice
+
+	config B43_FW_SQUASH
+		bool "Remove unnecessary firmware files"
+		depends on !B43_OPENFIRMWARE
+		default y
+		help
+		  This options allows you to remove unnecessary b43 firmware files
+		  from the final rootfs image. This can reduce the rootfs size by
+		  up to 200k.
+
+		  If unsure, say Y.
+
+	config B43_FW_SQUASH_COREREVS
+		string "Core revisions to include"
+		depends on B43_FW_SQUASH
+		default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
+		default "16,28,29,30" if TARGET_brcm47xx_mips74k
+		default "5,6,7,8,9,10,11,13,15,16,28,29,30"
+		help
+		  This is a comma seperated list of core revision numbers.
+
+		  Example (keep files for rev5 only):
+		    5
+
+		  Example (keep files for rev5 and rev11):
+		    5,11
+
+	config B43_FW_SQUASH_PHYTYPES
+		string "PHY types to include"
+		depends on B43_FW_SQUASH
+		default "G,N,LP" if TARGET_brcm47xx_legacy
+		default "N,HT" if TARGET_brcm47xx_mips74k
+		default "G,N,LP,HT"
+		help
+		  This is a comma seperated list of PHY types:
+		    A  => A-PHY
+		    AG => Dual A-PHY G-PHY
+		    G  => G-PHY
+		    LP => LP-PHY
+		    N  => N-PHY
+		    HT  => HT-PHY
+		    LCN  => LCN-PHY
+		    LCN40  => LCN40-PHY
+		    AC  => AC-PHY
+
+		  Example (keep files for G-PHY only):
+		    G
+
+		  Example (keep files for G-PHY and N-PHY):
+		    G,N
+
+	choice
+		prompt "Supported buses"
+		default PACKAGE_B43_BUSES_BCMA_AND_SSB
+		help
+		  This allows choosing buses that b43 should support.
+
+	config PACKAGE_B43_BUSES_BCMA_AND_SSB
+		depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+		bool "BCMA and SSB"
+
+	config PACKAGE_B43_BUSES_BCMA
+		depends on !TARGET_brcm47xx_legacy
+		bool "BCMA only"
+
+	config PACKAGE_B43_BUSES_SSB
+		depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+		bool "SSB only"
+
+	endchoice
+
+	config PACKAGE_B43_DEBUG
+		bool "Enable debug output and debugfs for b43"
+		default n
+		help
+		  Enable additional debug output and runtime sanity checks for b43
+		  and enables the debugfs interface.
+
+		  If unsure, say N.
+
+	config PACKAGE_B43_PIO
+		bool "Enable support for PIO transfer mode"
+		default n
+		help
+		  Enable support for using PIO instead of DMA. Unless you have DMA
+		  transfer problems you don't need this.
 
-		  Select this option if you want the driver to respect the user's decision about
-		  regulatory settings.
+		  If unsure, say N.
 
-	config PACKAGE_ATH_DEBUG
-		bool "Atheros wireless debugging"
+	config PACKAGE_B43_PHY_G
+		bool "Enable support for G-PHYs"
+		default n if TARGET_brcm47xx_mips74k
+		default y
 		help
-		  Say Y, if you want to debug atheros wireless drivers.
-		  Right now only ath9k makes use of this.
+		  Enable support for G-PHY. This includes support for the following devices:
+		  PCI: BCM4306, BCM4311, BCM4318
+		  SoC: BCM5352E, BCM4712
 
-	config PACKAGE_ATH_DFS
-		bool "Enable DFS support"
+		  If unsure, say Y.
+
+	config PACKAGE_B43_PHY_N
+		bool "Enable support for N-PHYs"
 		default y
 		help
-		  Dynamic frequency selection (DFS) is required for most of the 5 GHz band
-		  channels in Europe, US, and Japan.
+		  Enable support for N-PHY. This includes support for the following devices:
+		  PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
+		  SoC: BCM4716, BCM4717, BCM4718
 
-		  Select this option if you want to use such channels.
+		  Currently only 11g speed is available.
 
-  endif
-endef
+		  If unsure, say Y.
 
-define KernelPackage/ath
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros common driver part
-  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath25 +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
-  MENU:=1
-endef
+	config PACKAGE_B43_PHY_LP
+		bool "Enable support for LP-PHYs"
+		default n if TARGET_brcm47xx_mips74k
+		default y
+		help
+		  Enable support for LP-PHY. This includes support for the following devices:
+		  PCI: BCM4312
+		  SoC: BCM5354
 
-define KernelPackage/ath/description
- This module contains some common parts needed by Atheros Wireless drivers.
-endef
+		  If unsure, say Y.
 
-define KernelPackage/ath5k
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 5xxx wireless cards support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
-  DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
-  AUTOLOAD:=$(call AutoProbe,ath5k)
-endef
+	config PACKAGE_B43_PHY_HT
+		bool "Enable support for HT-PHYs"
+		default n if TARGET_brcm47xx_legacy
+		default y
+		help
+		  Enable support for HT-PHY. This includes support for the following devices:
+		  PCI: BCM4331
 
-define KernelPackage/ath5k/description
- This module adds support for wireless adapters based on
- Atheros 5xxx chipset.
-endef
+		  Currently only 11g speed is available.
 
-define KernelPackage/ath9k-common
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
-  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@KERNEL_RELAY
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
-endef
+		  If unsure, say Y.
 
-define KernelPackage/ath9k
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11n PCI wireless cards support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
-  DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
-  AUTOLOAD:=$(call AutoProbe,ath9k)
-endef
+	config PACKAGE_B43_PHY_LCN
+		bool "Enable support for LCN-PHYs"
+		depends on BROKEN
+		default n
+		help
+		  Currently broken.
 
-define KernelPackage/ath9k/description
-This module adds support for wireless adapters based on
-Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
-endef
+		  If unsure, say N.
 
-define KernelPackage/ath9k/config
+  endif
+endef
 
-	config ATH9K_SUPPORT_PCOEM
-		bool "Support chips used in PC OEM cards"
-		depends on PACKAGE_kmod-ath9k
-	
+define KernelPackage/b43/description
+Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
 endef
 
-define KernelPackage/ath9k-htc
+define KernelPackage/b43legacy
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11n USB device support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
-  DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
-  AUTOLOAD:=$(call AutoProbe,ath9k_htc)
+  TITLE:=Broadcom 43xx-legacy wireless support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
+  KCONFIG:= \
+  	CONFIG_HW_RANDOM=y
+  DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
+  AUTOLOAD:=$(call AutoProbe,b43legacy)
+  MENU:=1
 endef
 
-define KernelPackage/ath9k-htc/description
-This module adds support for wireless adapters based on
-Atheros USB AR9271 and AR7010 family of chipsets.
+define KernelPackage/b43legacy/description
+Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
 endef
 
-define KernelPackage/ath10k
+
+define KernelPackage/brcmutil
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11ac wireless cards support
-  URL:=https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
-  DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
-  AUTOLOAD:=$(call AutoLoad,55,ath10k_core ath10k_pci)
+  TITLE:=Broadcom IEEE802.11n common driver parts
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+  DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko
+  AUTOLOAD:=$(call AutoProbe,brcmutil)
+  MENU:=1
 endef
 
-define KernelPackage/ath10k/description
-This module adds support for wireless adapters based on
-Atheros IEEE 802.11ac family of chipsets. For now only
-PCI is supported.
+define KernelPackage/brcmutil/description
+ This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
 endef
 
-define KernelPackage/ath10k/config
-  if PACKAGE_kmod-ath10k
-
-	config ATH10K_STA_FW
-		bool "Firmware optimized for STA operation"
-		default n
-		help
-		  Use the ath10k firmware optimized for wireless client instead
-		  of access point operation.
+define KernelPackage/brcmutil/config
+  if PACKAGE_kmod-brcmutil
 
-	config ATH10K_API2_FW
-		bool "Firmware optimized for AP operation (v10.1 / API v2)"
-		default n
-		depends on !ATH10K_STA_FW
+	config PACKAGE_BRCM80211_DEBUG
+		bool "Broadcom wireless driver debugging"
 		help
-		  Use the ath10k firmware from the 10.1 SDK using API v2 optimized
-		  for access point operation if the default firmware keeps crashing.
+		  Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
 
   endif
 endef
 
-define KernelPackage/carl9170
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for Atheros AR9170 USB sticks
-  DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
-  AUTOLOAD:=$(call AutoProbe,carl9170)
+PKG_BRCMSMAC_FW_NAME:=broadcom-wl
+PKG_BRCMSMAC_FW_VERSION:=5.100.138
+PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
+PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
+PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+PKG_BRCMSMAC_FW_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
+
+define Download/brcmsmac
+  FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
+  URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
+  MD5SUM:=$(PKG_BRCMSMAC_FW_MD5SUM)
 endef
+$(eval $(call Download,brcmsmac))
 
-define KernelPackage/lib80211
+define KernelPackage/brcmsmac
   $(call KernelPackage/mac80211/Default)
-  TITLE:=802.11 Networking stack
-  DEPENDS:=+kmod-cfg80211
-  FILES:= \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211.ko \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko
-  AUTOLOAD:=$(call AutoProbe, \
-	lib80211 \
-	lib80211_crypt_wep \
-	lib80211_crypt_ccmp \
-	lib80211_crypt_tkip \
-  )
+  TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
+  AUTOLOAD:=$(call AutoProbe,brcmsmac)
+  MENU:=1
 endef
 
-define KernelPackage/lib80211/description
- Kernel modules for 802.11 Networking stack
- Includes:
- - lib80211
- - lib80211_crypt_wep
- - lib80211_crypt_tkip
- - lib80211_crytp_ccmp
+define KernelPackage/brcmsmac/description
+ Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
 endef
 
-define KernelPackage/libertas-usb
-  $(call KernelPackage/mac80211/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT
-  TITLE:=Marvell 88W8015 Wireless Driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko
-  AUTOLOAD:=$(call AutoProbe,libertas usb8xxx)
-endef
+define KernelPackage/brcmsmac/config
+  if PACKAGE_kmod-brcmsmac
 
-define KernelPackage/libertas-sdio
-  $(call KernelPackage/mac80211/Default)
-  DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml
-  TITLE:=Marvell 88W8686 Wireless Driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko
-  AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio)
-endef
+	config BRCMSMAC_USE_FW_FROM_WL
+		bool "Use firmware extracted from broadcom proprietary driver"
+		default y
+		help
+		  Instead of using the official brcmsmac firmware a firmware
+		  version 666.2 extracted from the proprietary Broadcom driver
+		  is used. This is needed to get core rev 17 used in bcm4716
+		  to work.
 
-define KernelPackage/mac80211-hwsim
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=mac80211 HW simulation device
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
-  AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
+		  If unsure, say Y.
+
+  endif
 endef
 
-define KernelPackage/net-libipw
+
+define KernelPackage/brcmfmac
   $(call KernelPackage/mac80211/Default)
-  TITLE:=libipw for ipw2100 and ipw2200
-  DEPENDS:=@PCI_SUPPORT +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko
-  AUTOLOAD:=$(call AutoProbe,libipw)
+  TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil \
+	+BRCMFMAC_PCIE:brcmfmac-firmware-pcie \
+	+BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_SDIO:brcmfmac-firmware-sdio \
+	+BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko
+  AUTOLOAD:=$(call AutoProbe,brcmfmac)
 endef
 
-define KernelPackage/net-libipw/description
- Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200.
+define KernelPackage/brcmfmac/description
+ Kernel module for Broadcom IEEE802.11n USB Wireless cards
 endef
 
-IPW2100_NAME:=ipw2100-fw
-IPW2100_VERSION:=1.3
-
-define Download/net-ipw2100
-  URL:=http://bughost.org/firmware/
-  FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
-  MD5SUM=46aa75bcda1a00efa841f9707bbbd113
-endef
-$(eval $(call Download,net-ipw2100))
+define KernelPackage/brcmfmac/config
+  if PACKAGE_kmod-brcmfmac
 
-define KernelPackage/net-ipw2100
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Intel IPW2100 driver
-  DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko
-  AUTOLOAD:=$(call AutoProbe,ipw2100)
-endef
+	config BRCMFMAC_SDIO
+		bool "Enable SDIO bus interface support"
+		default n
+		help
+		  Enable support for cards attached to an SDIO bus.
+		  Select this option only if you are sure that your
+		  board has a Broadcom wireless chip atacched to
+		  that bus.
 
-define KernelPackage/net-ipw2100/description
- Kernel support for Intel IPW2100
- Includes:
- - ipw2100
-endef
+	config BRCMFMAC_USB
+		bool "Enable USB bus interface support"
+		depends on USB_SUPPORT
+		default y
+		help
+		  Supported USB connected chipsets:
+		  BCM43235, BCM43236, BCM43238 (all in revision 3 only)
+		  BCM43143, BCM43242, BCM43566, BCM43569
 
-IPW2200_NAME:=ipw2200-fw
-IPW2200_VERSION:=3.1
+	config BRCMFMAC_PCIE
+		bool "Enable PCIE bus interface support"
+		depends on PCI_SUPPORT
+		default y
+		help
+		  Supported PCIe connected chipsets:
+		  BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
 
-define Download/net-ipw2200
-  URL:=http://bughost.org/firmware/
-  FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
-  MD5SUM=eaba788643c7cc7483dd67ace70f6e99
+  endif
 endef
-$(eval $(call Download,net-ipw2200))
 
-define KernelPackage/net-ipw2200
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Intel IPW2200 driver
-  DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko
-  AUTOLOAD:=$(call AutoProbe,ipw2200)
-endef
 
-define KernelPackage/net-ipw2200/description
- Kernel support for Intel IPW2200
- Includes:
- - ipw2200
+define KernelPackage/carl9170
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for Atheros AR9170 USB sticks
+  DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
+  AUTOLOAD:=$(call AutoProbe,carl9170)
 endef
 
 
-define KernelPackage/net-hermes
+define KernelPackage/hermes
   $(call KernelPackage/mac80211/Default)
   TITLE:=Hermes 802.11b chipset support
-  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco.ko
+  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT +kmod-crypto-michael-mic
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco.ko
   AUTOLOAD:=$(call AutoProbe,orinoco)
 endef
 
-define KernelPackage/net-hermes/description
+define KernelPackage/hermes/description
  Kernel support for Hermes 802.11b chipsets
 endef
 
-define KernelPackage/net-hermes-pci
+define KernelPackage/hermes-pci
   $(call KernelPackage/mac80211/Default)
   TITLE:=Intersil Prism 2.5 PCI support
-  DEPENDS:=@PCI_SUPPORT +kmod-net-hermes
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_pci.ko
+  DEPENDS:=@PCI_SUPPORT +kmod-hermes
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_pci.ko
   AUTOLOAD:=$(call AutoProbe,orinoco_pci)
 endef
 
-define KernelPackage/net-hermes-pci/description
+define KernelPackage/hermes-pci/description
  Kernel modules for Intersil Prism 2.5 PCI support
 endef
 
-define KernelPackage/net-hermes-plx
+define KernelPackage/hermes-plx
   $(call KernelPackage/mac80211/Default)
   TITLE:=PLX9052 based PCI adaptor
-  DEPENDS:=@PCI_SUPPORT +kmod-net-hermes
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_plx.ko
+  DEPENDS:=@PCI_SUPPORT +kmod-hermes
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_plx.ko
   AUTOLOAD:=$(call AutoProbe,orinoco_plx)
 endef
 
-define KernelPackage/net-hermes-plx/description
+define KernelPackage/hermes-plx/description
  Kernel modules for Hermes in PLX9052 based PCI adaptors
 endef
 
-define KernelPackage/net-hermes-pcmcia
+define KernelPackage/hermes-pcmcia
   $(call KernelPackage/mac80211/Default)
   TITLE:=Hermes based PCMCIA adaptors
-  DEPENDS:=@PCMCIA_SUPPORT +kmod-net-hermes @BROKEN
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_cs.ko
+  DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes @BROKEN
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_cs.ko
   AUTOLOAD:=$(call AutoProbe,orinoco_cs)
 endef
 
-define KernelPackage/net-hermes-pcmcia/description
+define KernelPackage/hermes-pcmcia/description
  Kernel modules for Hermes based PCMCIA adaptors
 endef
 
-define KernelPackage/iwlagn
+
+define KernelPackage/iwlwifi
   $(call KernelPackage/mac80211/Default)
-  DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT
+  DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT +iwlwifi-firmware
   TITLE:=Intel AGN Wireless support
   FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/iwlwifi.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/dvm/iwldvm.ko
-  AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm)
+	$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko
+  AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm)
   MENU:=1
 endef
 
-define KernelPackage/iwlagn/description
- iwlagn kernel module for Intel 5000/5150/1000/6000/6050/6005/6030/100 support
-endef
-
-define KernelPackage/iwlagn/config
-  if PACKAGE_kmod-iwlagn
-
-	config IWL5000_FW
-		bool "Intel 5000 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
-
-	config IWL5150_FW
-		bool "Intel 5150 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Wireless WiFi 5150AGN
-
-	config IWL1000_FW
-		bool "Intel 1000 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Wireless-N 1000
-
-	config IWL6000_FW
-		bool "Intel 6000 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Ultimate-N 6300 and Advanced-N 6200
-
-	config IWL6050_FW
-		bool "Intel 6050 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Advanced-N + WiMAX 6250 and Wireless-N + WiMAX 6150
-
-	config IWL6005_FW
-		bool "Intel 6005 Firmware"
-		default y
+define KernelPackage/iwlwifi/description
+ iwlwifi kernel module for
+ Intel Wireless WiFi Link 6250AGN Adapter
+ Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
+ Intel WiFi Link 1000BGN
+ Intel Wireless WiFi 5150AGN
+ Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+ Intel 6005 Series Wi-Fi Adapters
+ Intel 6030 Series Wi-Fi Adapters
+ Intel Wireless WiFi Link 6150BGN 2 Adapter
+ Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
+ Intel 2000 Series Wi-Fi Adapters
+ Intel 7260 Wi-Fi Adapter
+ Intel 3160 Wi-Fi Adapter
+ Intel 7265 Wi-Fi Adapter
+ Intel 8260 Wi-Fi Adapter
+ Intel 3165 Wi-Fi Adapter
+endef
+
+define KernelPackage/iwlwifi/config
+  if PACKAGE_kmod-iwlwifi
+
+	config PACKAGE_IWLWIFI_DEBUG
+		bool "Enable full debugging output in the iwlwifi driver"
+		default n
 		help
-		  Download and install firmware for:
-		    Intel Centrino Advanced-N 6205
+		  This option will enable debug tracing output for the iwlwifi drivers
 
-	config IWL6030_FW
-		bool "Intel 6030 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Advanced-N 6230, Wireless-N 1030, Wireless-N 130 and Advanced-N 6235
+		  This will result in the kernel module being ~100k larger.  You can
+		  control which debug output is sent to the kernel log by setting the
+		  value in
 
-	config IWL7260_FW
-		bool "Intel 7260 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Dual Band Wireless-N 7260 and Intel Dual Band Wireless-AC 7260
+			/sys/module/iwlwifi/parameters/debug
 
-	config IWL7265_FW
-		bool "Intel 7265 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Wireless 7265
+		  This entry will only exist if this option is enabled.
 
-	config IWL100_FW
-		bool "Intel 100 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Wireless-N 100
+		  To set a value, simply echo an 8-byte hex value to the same file:
 
-	config IWL2000_FW
-		bool "Intel 2000 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Wireless-N 2200
+			  % echo 0x43fff > /sys/module/iwlwifi/parameters/debug
 
-	config IWL2030_FW
-		bool "Intel 2030 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Wireless-N 2230
+		  You can find the list of debug mask values in:
+			  drivers/net/wireless/intel/iwlwifi/iwl-debug.h
 
-	config IWL105_FW
-		bool "Intel 105 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Centrino Wireless-N 105
+		  If this is your first time using this driver, you should say Y here
+		  as the debug information can assist others in helping you resolve
+		  any problems you may encounter.
 
-	config IWL135_FW
-		bool "Intel 135 Firmware"
-		default y
+	config PACKAGE_IWLWIFI_DEBUGFS
+	        bool "iwlwifi debugfs support"
+		depends on PACKAGE_MAC80211_DEBUGFS
+		default n
 		help
-		  Download and install firmware for:
-		    Intel Centrino Wireless-N 135
+		  Enable creation of debugfs files for the iwlwifi drivers. This
+		  is a low-impact option that allows getting insight into the
+		  driver's state at runtime.
 
-	config IWL3160_FW
-		bool "Intel 3160 Firmware"
-		default y
-		help
-		  Download and install firmware for:
-		    Intel Wireless 3160
   endif
 endef
 
@@ -942,7 +834,7 @@ define KernelPackage/iwl-legacy
   $(call KernelPackage/mac80211/Default)
   DEPENDS:= +kmod-mac80211 @PCI_SUPPORT
   TITLE:=Intel legacy Wireless support
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwlegacy.ko
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko
   AUTOLOAD:=$(call AutoProbe,iwlegacy)
 endef
 
@@ -952,9 +844,9 @@ endef
 
 define KernelPackage/iwl3945
   $(call KernelPackage/mac80211/Default)
-  DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy
+  DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +iwl3945-firmware
   TITLE:=Intel iwl3945 Wireless support
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl3945.ko
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko
   AUTOLOAD:=$(call AutoProbe,iwl3945)
 endef
 
@@ -964,9 +856,9 @@ endef
 
 define KernelPackage/iwl4965
   $(call KernelPackage/mac80211/Default)
-  DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT
+  DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT +iwl4965-firmware
   TITLE:=Intel iwl4965 Wireless support
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl4965.ko
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko
   AUTOLOAD:=$(call AutoProbe,iwl4965)
 endef
 
@@ -975,557 +867,576 @@ define KernelPackage/iwl4965/description
 endef
 
 
-define KernelPackage/mwl8k
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
-  URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
-  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko
-  AUTOLOAD:=$(call AutoProbe,mwl8k)
-endef
-
-define KernelPackage/mwl8k/description
- Kernel modules for Marvell TOPDOG 802.11 Wireless cards
-endef
-
-
-define KernelPackage/mwifiex-pcie
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
-  URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
-  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex_pcie.ko
-  AUTOLOAD:=$(call AutoProbe,mwifiex_pcie)
-endef
-
-define KernelPackage/mwifiex-pcie/description
- Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
-endef
-
-
-define KernelPackage/wlcore
+define KernelPackage/lib80211
   $(call KernelPackage/mac80211/Default)
-  TITLE:=TI common driver part
-  DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  TITLE:=802.11 Networking stack
+  DEPENDS:=+kmod-cfg80211
   FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
-  AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio)
-endef
-
-define KernelPackage/wlcore/description
- This module contains some common parts needed by TI Wireless drivers.
-endef
-
-define KernelPackage/wl12xx
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for TI WL12xx
-  URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx
-  DEPENDS+= +kmod-wlcore
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko
-  AUTOLOAD:=$(call AutoProbe,wl12xx)
-endef
-
-define KernelPackage/wl12xx/description
- Kernel modules for TI WL12xx
-endef
-
-define KernelPackage/wl18xx
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for TI WL18xx
-  URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx
-  DEPENDS+= +kmod-wlcore
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko
-  AUTOLOAD:=$(call AutoProbe,wl18xx)
-endef
-
-define KernelPackage/wl18xx/description
- Kernel modules for TI WL18xx
-endef
-
-
-#Broadcom firmware
-ifneq ($(CONFIG_B43_FW_6_30),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=6.30.163.46
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-  PKG_B43_FWV4_MD5SUM:=6fe97e9368d25342a1ab943d3cf3496d
-else
-ifneq ($(CONFIG_B43_FW_5_10),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=5.10.56.27.3
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-  PKG_B43_FWV4_MD5SUM:=3363e3a6b3d9d73c49dea870c7834eac
-else
-ifneq ($(CONFIG_B43_FW_4_178),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=4.178.10.4
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-  PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb
-else
-ifneq ($(CONFIG_B43_FW_5_100_138),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=5.100.138
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-  PKG_B43_FWV4_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
-else
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=4.150.10.5
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-  PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60
-endif
-endif
-endif
-endif
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=5.2
-  PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
-  PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
-  PKG_B43_FWV4_SOURCE_URL:=http://www.ing.unibs.it/openfwwf/firmware/
-  PKG_B43_FWV4_MD5SUM:=e045a135453274e439ae183f8498b0fa
-endif
-
-
-PKG_B43_FWV3_NAME:=wl_apsta
-PKG_B43_FWV3_VERSION:=3.130.20.0
-PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o
-PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/
-PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3
-
-define Download/b43
-  FILE:=$(PKG_B43_FWV4_SOURCE)
-  URL:=$(PKG_B43_FWV4_SOURCE_URL)
-  MD5SUM:=$(PKG_B43_FWV4_MD5SUM)
+	$(PKG_BUILD_DIR)/net/wireless/lib80211.ko \
+	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \
+	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \
+	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko
+  AUTOLOAD:=$(call AutoProbe, \
+	lib80211 \
+	lib80211_crypt_wep \
+	lib80211_crypt_ccmp \
+	lib80211_crypt_tkip \
+  )
 endef
-$(eval $(call Download,b43))
 
-define Download/b43legacy
-  FILE:=$(PKG_B43_FWV3_SOURCE)
-  URL:=$(PKG_B43_FWV3_SOURCE_URL)
-  MD5SUM:=$(PKG_B43_FWV3_MD5SUM)
+define KernelPackage/lib80211/description
+ Kernel modules for 802.11 Networking stack
+ Includes:
+ - lib80211
+ - lib80211_crypt_wep
+ - lib80211_crypt_tkip
+ - lib80211_crytp_ccmp
 endef
-$(eval $(call Download,b43legacy))
 
 
-define KernelPackage/b43
+define KernelPackage/libipw
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom 43xx wireless support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
-  KCONFIG:= \
-  	CONFIG_HW_RANDOM=y
-  # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
-  DEPENDS += \
-	@PCI_SUPPORT +kmod-mac80211 \
-	$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
-	$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko
-  AUTOLOAD:=$(call AutoProbe,b43)
-  MENU:=1
-endef
-
-define KernelPackage/b43/config
-
-config PACKAGE_B43_USE_SSB
-	select PACKAGE_kmod-ssb
-	tristate
-	depends on !TARGET_brcm47xx && !TARGET_brcm63xx
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
-
-config PACKAGE_B43_USE_BCMA
-	select PACKAGE_kmod-bcma
-	tristate
-	depends on !TARGET_brcm47xx && !TARGET_bcm53xx
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
-
-  if PACKAGE_kmod-b43
+  TITLE:=libipw for ipw2100 and ipw2200
+  DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-crypto-core +kmod-crypto-arc4 +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko
+  AUTOLOAD:=$(call AutoProbe,libipw)
+endef
 
-	choice
-		prompt "b43 firmware version"
-		default B43_FW_5_100_138
-		help
-		  This option allows you to select the version of the b43 firmware.
+define KernelPackage/libipw/description
+ Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200.
+endef
 
-	config B43_FW_4_150
-		bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
-		help
-		  Old stable firmware for BCM43xx devices.
+IPW2100_NAME:=ipw2100-fw
+IPW2100_VERSION:=1.3
 
-		  If unsure, select this.
+define Download/ipw2100
+  URL:=http://bughost.org/firmware/
+  FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
+  MD5SUM=46aa75bcda1a00efa841f9707bbbd113
+endef
+$(eval $(call Download,ipw2100))
 
-	config B43_FW_4_178
-		bool "Firmware 478.104 from driver 4.178.10.4"
-		help
-		  Older firmware for BCM43xx devices.
+define KernelPackage/ipw2100
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Intel IPW2100 driver
+  DEPENDS:=@PCI_SUPPORT +kmod-libipw
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko
+  AUTOLOAD:=$(call AutoProbe,ipw2100)
+endef
 
-		  If unsure, select the "stable" firmware.
+define KernelPackage/ipw2100/description
+ Kernel support for Intel IPW2100
+ Includes:
+ - ipw2100
+endef
 
-	config B43_FW_5_10
-		bool "Firmware 508.1084 from driver 5.10.56.27"
-		help
-		  Older firmware for BCM43xx devices.
+IPW2200_NAME:=ipw2200-fw
+IPW2200_VERSION:=3.1
 
-		  If unsure, select the "stable" firmware.
+define Download/ipw2200
+  URL:=http://bughost.org/firmware/
+  FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
+  MD5SUM=eaba788643c7cc7483dd67ace70f6e99
+endef
+$(eval $(call Download,ipw2200))
 
-	config B43_FW_5_100_138
-		bool "Firmware 666.2 from driver 5.100.138 (stable)"
-		help
-		  The currently default firmware for BCM43xx devices.
+define KernelPackage/ipw2200
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Intel IPW2200 driver
+  DEPENDS:=@PCI_SUPPORT +kmod-libipw
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko
+  AUTOLOAD:=$(call AutoProbe,ipw2200)
+endef
 
-		  This firmware currently gets most of the testing and is needed for some N-PHY devices.
+define KernelPackage/ipw2200/description
+ Kernel support for Intel IPW2200
+ Includes:
+ - ipw2200
+endef
 
-		  If unsure, select the this firmware.
 
-	config B43_FW_6_30
-		bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
-		help
-		  Newer experimental firmware for BCM43xx devices.
+define KernelPackage/libertas-usb
+  $(call KernelPackage/mac80211/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware
+  TITLE:=Marvell 88W8015 Wireless Driver
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko
+  AUTOLOAD:=$(call AutoProbe,libertas usb8xxx)
+endef
 
-		  This firmware is mostly untested.
+define KernelPackage/libertas-sdio
+  $(call KernelPackage/mac80211/Default)
+  DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware
+  TITLE:=Marvell 88W8686 Wireless Driver
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko
+  AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio)
+endef
 
-		  If unsure, select the "stable" firmware.
+define KernelPackage/libertas-spi
+  $(call KernelPackage/mac80211/Default)
+  SUBMENU:=Wireless Drivers
+  DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-spi-firmware
+  KCONFIG := \
+	CONFIG_SPI=y \
+	CONFIG_SPI_MASTER=y
+  TITLE:=Marvell 88W8686 SPI Wireless Driver
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_spi.ko
+  AUTOLOAD:=$(call AutoProbe,libertas libertas_spi)
+endef
 
-	config B43_OPENFIRMWARE
-		bool "Open FirmWare for WiFi networks"
-		help
-		  Opensource firmware for BCM43xx devices.
+define KernelPackage/mac80211-hwsim
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=mac80211 HW simulation device
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
+  AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
+endef
 
-		  Do _not_ select this, unless you know what you are doing.
-		  The Opensource firmware is not suitable for embedded devices, yet.
-		  It does not support QoS, which is bad for AccessPoints.
-		  It does not support hardware crypto acceleration, which is a showstopper
-		  for embedded devices with low CPU resources.
 
-		  If unsure, select the "stable" firmware.
+define KernelPackage/mt7601u
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=MT7601U-based USB dongles Wireless Driver
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT @USB_SUPPORT +kmod-usb-core +mt7601u-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mediatek/mt7601u/mt7601u.ko
+  AUTOLOAD:=$(call AutoProbe,mt7601u)
+endef
 
-	endchoice
 
-	config B43_FW_SQUASH
-		bool "Remove unnecessary firmware files"
-		depends on !B43_OPENFIRMWARE
-		default y
-		help
-		  This options allows you to remove unnecessary b43 firmware files
-		  from the final rootfs image. This can reduce the rootfs size by
-		  up to 200k.
+define KernelPackage/mwl8k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
+  URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
+  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwl8k-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko
+  AUTOLOAD:=$(call AutoProbe,mwl8k)
+endef
 
-		  If unsure, say Y.
+define KernelPackage/mwl8k/description
+ Kernel modules for Marvell TOPDOG 802.11 Wireless cards
+endef
 
-	config B43_FW_SQUASH_COREREVS
-		string "Core revisions to include"
-		depends on B43_FW_SQUASH
-		default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
-		default "16,28,29,30" if TARGET_brcm47xx_mips74k
-		default "5,6,7,8,9,10,11,13,15,16,28,29,30"
-		help
-		  This is a comma seperated list of core revision numbers.
 
-		  Example (keep files for rev5 only):
-		    5
+define KernelPackage/mwifiex-pcie
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
+  URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
+  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwifiex-pcie-firmware
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko
+  AUTOLOAD:=$(call AutoProbe,mwifiex_pcie)
+endef
 
-		  Example (keep files for rev5 and rev11):
-		    5,11
+define KernelPackage/mwifiex-pcie/description
+ Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
+endef
 
-	config B43_FW_SQUASH_PHYTYPES
-		string "PHY types to include"
-		depends on B43_FW_SQUASH
-		default "G,N,LP" if TARGET_brcm47xx_legacy
-		default "N,HT" if TARGET_brcm47xx_mips74k
-		default "G,N,LP,HT"
-		help
-		  This is a comma seperated list of PHY types:
-		    A  => A-PHY
-		    AG => Dual A-PHY G-PHY
-		    G  => G-PHY
-		    LP => LP-PHY
-		    N  => N-PHY
-		    HT  => HT-PHY
-		    LCN  => LCN-PHY
-		    LCN40  => LCN40-PHY
-		    AC  => AC-PHY
 
-		  Example (keep files for G-PHY only):
-		    G
+# Prism54 drivers
+P54PCIFW:=2.13.12.0.arm
+P54USBFW:=2.13.24.0.lm87.arm
+P54SPIFW:=2.13.0.0.a.13.14.arm
 
-		  Example (keep files for G-PHY and N-PHY):
-		    G,N
+define Download/p54usb
+  FILE:=$(P54USBFW)
+  URL:=http://daemonizer.de/prism54/prism54-fw/fw-usb
+  MD5SUM:=8e8ab005a4f8f0123bcdc51bc25b47f6
+endef
+$(eval $(call Download,p54usb))
 
-	choice
-		prompt "Supported buses"
-		default PACKAGE_B43_BUSES_BCMA_AND_SSB
-		help
-		  This allows choosing buses that b43 should support.
+define Download/p54pci
+  FILE:=$(P54PCIFW)
+  URL:=http://daemonizer.de/prism54/prism54-fw/fw-softmac
+  MD5SUM:=ff7536af2092b1c4b21315bd103ef4c4
+endef
+$(eval $(call Download,p54pci))
 
-	config PACKAGE_B43_BUSES_BCMA_AND_SSB
-		depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
-		bool "BCMA and SSB"
+define Download/p54spi
+  FILE:=$(P54SPIFW)
+  URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560
+  MD5SUM:=42661f8ecbadd88012807493f596081d
+endef
+$(eval $(call Download,p54spi))
 
-	config PACKAGE_B43_BUSES_BCMA
-		depends on !TARGET_brcm47xx_legacy
-		bool "BCMA only"
+define KernelPackage/p54/Default
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Prism54 Drivers
+endef
 
-	config PACKAGE_B43_BUSES_SSB
-		depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
-		bool "SSB only"
+define KernelPackage/p54/description
+  Kernel module for Prism54 chipsets (mac80211)
+endef
 
-	endchoice
+define KernelPackage/p54-common
+  $(call KernelPackage/p54/Default)
+  DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt
+  TITLE+= (COMMON)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54common.ko
+endef
 
-	config PACKAGE_B43_DEBUG
-		bool "Enable debug output and debugfs for b43"
-		default n
-		help
-		  Enable additional debug output and runtime sanity checks for b43
-		  and enables the debugfs interface.
+define KernelPackage/p54-pci
+  $(call KernelPackage/p54/Default)
+  TITLE+= (PCI)
+  DEPENDS+= @PCI_SUPPORT +kmod-p54-common
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54pci.ko
+  AUTOLOAD:=$(call AutoProbe,p54pci)
+endef
 
-		  If unsure, say N.
+define KernelPackage/p54-usb
+  $(call KernelPackage/p54/Default)
+  TITLE+= (USB)
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54usb.ko
+  AUTOLOAD:=$(call AutoProbe,p54usb)
+endef
 
-	config PACKAGE_B43_PIO
-		bool "Enable support for PIO transfer mode"
-		default n
-		help
-		  Enable support for using PIO instead of DMA. Unless you have DMA
-		  transfer problems you don't need this.
+define KernelPackage/p54-spi
+  $(call KernelPackage/p54/Default)
+  TITLE+= (SPI)
+  DEPENDS+= @TARGET_omap24xx +kmod-p54-common
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54spi.ko
+  AUTOLOAD:=$(call AutoProbe,p54spi)
+endef
 
-		  If unsure, say N.
+define KernelPackage/rt2x00/Default
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Ralink Drivers for RT2x00 cards
+endef
 
-	config PACKAGE_B43_PHY_G
-		bool "Enable support for G-PHYs"
-		default n if TARGET_brcm47xx_mips74k
-		default y
-		help
-		  Enable support for G-PHY. This includes support for the following devices:
-		  PCI: BCM4306, BCM4311, BCM4318
-		  SoC: BCM5352E, BCM4712
+define KernelPackage/rt2x00-lib
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t
+  TITLE+= (LIB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko
+  MENU:=1
+endef
 
-		  If unsure, say Y.
+define KernelPackage/rt2x00-lib/config
+  if PACKAGE_kmod-rt2x00-lib
 
-	config PACKAGE_B43_PHY_N
-		bool "Enable support for N-PHYs"
-		default y
+	config PACKAGE_RT2X00_LIB_DEBUGFS
+		bool "Enable rt2x00 debugfs support"
+		depends on PACKAGE_MAC80211_DEBUGFS
 		help
-		  Enable support for N-PHY. This includes support for the following devices:
-		  PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
-		  SoC: BCM4716, BCM4717, BCM4718
+		  Enable creation of debugfs files for the rt2x00 drivers.
+		  These debugfs files support both reading and writing of the
+		  most important register types of the rt2x00 hardware.
 
-		  Currently only 11g speed is available.
+	config PACKAGE_RT2X00_DEBUG
+		bool "Enable rt2x00 debug output"
+		help
+		  Enable debugging output for all rt2x00 modules
 
-		  If unsure, say Y.
+  endif
+endef
 
-	config PACKAGE_B43_PHY_LP
-		bool "Enable support for LP-PHYs"
-		default n if TARGET_brcm47xx_mips74k
-		default y
-		help
-		  Enable support for LP-PHY. This includes support for the following devices:
-		  PCI: BCM4312
-		  SoC: BCM5354
+define KernelPackage/rt2x00-mmio
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6
+  HIDDEN:=1
+  TITLE+= (MMIO)
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko
+endef
 
-		  If unsure, say Y.
+define KernelPackage/rt2x00-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib
+  HIDDEN:=1
+  TITLE+= (PCI)
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2x00pci)
+endef
 
-	config PACKAGE_B43_PHY_HT
-		bool "Enable support for HT-PHYs"
-		default n if TARGET_brcm47xx_legacy
-		default y
-		help
-		  Enable support for HT-PHY. This includes support for the following devices:
-		  PCI: BCM4331
+define KernelPackage/rt2x00-usb
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core
+  HIDDEN:=1
+  TITLE+= (USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt2x00usb)
+endef
 
-		  Currently only 11g speed is available.
+define KernelPackage/rt2800-lib
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT
+  HIDDEN:=1
+  TITLE+= (rt2800 LIB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko
+endef
 
-		  If unsure, say Y.
+define KernelPackage/rt2400-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
+  TITLE+= (RT2400 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2400pci)
+endef
 
-	config PACKAGE_B43_PHY_LCN
-		bool "Enable support for LCN-PHYs"
-		depends on BROKEN
-		default n
-		help
-		  Currently broken.
+define KernelPackage/rt2500-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
+  TITLE+= (RT2500 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2500pci)
+endef
 
-		  If unsure, say N.
+define KernelPackage/rt2500-usb
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
+  TITLE+= (RT2500 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt2500usb)
+endef
 
-  endif
+define KernelPackage/rt2800-mmio
+$(call KernelPackage/rt2x00/Default)
+  TITLE += (RT28xx/RT3xxx MMIO)
+  DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio
+  HIDDEN:=1
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko
 endef
 
-define KernelPackage/b43/description
-Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
+define KernelPackage/rt2800-soc
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib
+  TITLE += (RT28xx/RT3xxx SoC)
+  FILES := \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko
+  AUTOLOAD:=$(call AutoProbe,rt2800soc)
 endef
 
-define KernelPackage/b43legacy
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom 43xx-legacy wireless support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
-  KCONFIG:= \
-  	CONFIG_HW_RANDOM=y
-  DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko
-  AUTOLOAD:=$(call AutoProbe,b43legacy)
-  MENU:=1
+define KernelPackage/rt2800-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware
+  TITLE+= (RT2860 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2800pci)
 endef
 
-define KernelPackage/b43legacy/config
-  if PACKAGE_kmod-b43legacy
+define KernelPackage/rt2800-usb
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware
+  TITLE+= (RT2870 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt2800usb)
+endef
 
-	config B43LEGACY_FW_SQUASH
-		bool "Remove unnecessary firmware files"
-		default y
-		help
-		  This options allows you to remove unnecessary b43legacy firmware files
-		  from the final rootfs image. This can reduce the rootfs size by
-		  up to 50k.
 
-		  If unsure, say Y.
+define KernelPackage/rt61-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware
+  TITLE+= (RT2x61 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt61pci)
+endef
 
-	config B43LEGACY_FW_SQUASH_COREREVS
-		string "Core revisions to include"
-		depends on B43LEGACY_FW_SQUASH
-		default "1,2,3,4"
-		help
-		  This is a comma seperated list of core revision numbers.
+define KernelPackage/rt73-usb
+  $(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware
+  TITLE+= (RT73 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt73usb)
+endef
 
-		  Example (keep files for rev4 only):
-		    4
 
-		  Example (keep files for rev2 and rev4):
-		    2,4
+define KernelPackage/rtl818x/Default
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek Drivers for RTL818x devices
+  URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187
+  DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211
+endef
 
-  endif
+define KernelPackage/rtl8180
+  $(call KernelPackage/rtl818x/Default)
+  DEPENDS+= @PCI_SUPPORT
+  TITLE+= (RTL8180 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl818x_pci.ko
+  AUTOLOAD:=$(call AutoProbe,rtl818x_pci)
 endef
 
-define KernelPackage/b43legacy/description
-Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
+define KernelPackage/rtl8187
+$(call KernelPackage/rtl818x/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core
+  TITLE+= (RTL8187 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8187)
 endef
 
+define KernelPackage/rtlwifi/config
+	config PACKAGE_RTLWIFI_DEBUG
+		bool "Realtek wireless debugging"
+		depends on PACKAGE_kmod-rtlwifi
+		help
+		  Say Y, if you want to debug realtek wireless drivers.
+
+endef
 
-define KernelPackage/brcmutil
+define KernelPackage/rtlwifi
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom IEEE802.11n common driver parts
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
-  AUTOLOAD:=$(call AutoProbe,brcmutil)
-  MENU:=1
+  TITLE:=Realtek common driver part
+  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko
+  HIDDEN:=1
 endef
 
-define KernelPackage/brcmutil/description
- This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
+define KernelPackage/rtlwifi-pci
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek common driver part (PCI support)
+  DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko
+  AUTOLOAD:=$(call AutoProbe,rtl_pci)
+  HIDDEN:=1
 endef
 
-define KernelPackage/brcmutil/config
-  if PACKAGE_kmod-brcmutil
+define KernelPackage/rtlwifi-usb
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek common driver part (USB support)
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko
+  AUTOLOAD:=$(call AutoProbe,rtl_usb)
+  HIDDEN:=1
+endef
 
-	config PACKAGE_BRCM80211_DEBUG
-		bool "Broadcom wireless driver debugging"
-		help
-		  Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
+define KernelPackage/rtl8192c-common
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192CE/RTL8192CU common support module
+  DEPENDS+= +kmod-rtlwifi
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko
+  HIDDEN:=1
+endef
 
-  endif
+define KernelPackage/rtl8192ce
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192CE/RTL8188CE support
+  DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common +rtl8192ce-firmware
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192ce)
 endef
 
-PKG_BRCMSMAC_FW_NAME:=broadcom-wl
-PKG_BRCMSMAC_FW_VERSION:=5.100.138
-PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
-PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
-PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-PKG_BRCMSMAC_FW_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
+define KernelPackage/rtl8192se
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192SE/RTL8191SE support
+  DEPENDS+= +kmod-rtlwifi-pci +rtl8192se-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rtl8192se.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192se)
+endef
 
-define Download/brcmsmac
-  FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
-  URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
-  MD5SUM:=$(PKG_BRCMSMAC_FW_MD5SUM)
+define KernelPackage/rtl8192de
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192DE/RTL8188DE support
+  DEPENDS+= +kmod-rtlwifi-pci +rtl8192de-firmware
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rtl8192de.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192de)
 endef
-$(eval $(call Download,brcmsmac))
 
-define KernelPackage/brcmsmac
+define KernelPackage/rtl8192cu
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
-  AUTOLOAD:=$(call AutoProbe,brcmsmac)
-  MENU:=1
+  TITLE:=Realtek RTL8192CU/RTL8188CU support
+  DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common +rtl8192cu-firmware
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192cu)
 endef
 
-define KernelPackage/brcmsmac/description
- Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
+
+define KernelPackage/rtl8xxxu
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=alternative Realtek RTL8XXXU support
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8xxxu)
 endef
 
-define KernelPackage/brcmsmac/config
-  if PACKAGE_kmod-brcmsmac
+define KernelPackage/rtl8xxxu/description
+  This is an alternative driver for various Realtek RTL8XXX
+  parts written to utilize the Linux mac80211 stack.
+  The driver is known to work with a number of RTL8723AU,
+  RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices
 
-	config BRCMSMAC_USE_FW_FROM_WL
-		bool "Use firmware extracted from broadcom proprietary driver"
-		default y
-		help
-		  Instead of using the official brcmsmac firmware a firmware
-		  version 666.2 extracted from the proprietary Broadcom driver
-		  is used. This is needed to get core rev 17 used in bcm4716
-		  to work.
+  This driver is under development and has a limited feature
+  set. In particular it does not yet support 40MHz channels
+  and power management. However it should have a smaller
+  memory footprint than the vendor drivers and benetifs
+  from the in kernel mac80211 stack.
+
+  It can coexist with drivers from drivers/staging/rtl8723au,
+  drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi,
+  but you will need to control which module you wish to load.
 
-		  If unsure, say Y.
+  RTL8XXXU_UNTESTED is enabled
+  This option enables detection of Realtek 8723/8188/8191/8192 WiFi
+  USB devices which have not been tested directly by the driver
+  author or reported to be working by third parties.
 
-  endif
+  Please report your results!
 endef
 
 
-define KernelPackage/brcmfmac
+define KernelPackage/wlcore
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_USB:kmod-usb-core
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
-  AUTOLOAD:=$(call AutoProbe,brcmfmac)
+  TITLE:=TI common driver part
+  DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
+  AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio)
 endef
 
-define KernelPackage/brcmfmac/description
- Kernel module for Broadcom IEEE802.11n USB Wireless cards
+define KernelPackage/wlcore/description
+ This module contains some common parts needed by TI Wireless drivers.
 endef
 
-define KernelPackage/brcmfmac/config
-  if PACKAGE_kmod-brcmfmac
+define KernelPackage/wl12xx
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for TI WL12xx
+  URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx
+  DEPENDS+= +kmod-wlcore +wl12xx-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko
+  AUTOLOAD:=$(call AutoProbe,wl12xx)
+endef
 
-	config BRCMFMAC_SDIO
-		bool "Enable SDIO bus interface support"
-		default n
-		help
-		  Enable support for cards attached to an SDIO bus.
-		  Select this option only if you are sure that your
-		  board has a Broadcom wireless chip atacched to
-		  that bus.
+define KernelPackage/wl12xx/description
+ Kernel modules for TI WL12xx
+endef
 
-	config BRCMFMAC_USB
-		bool "Enable USB bus interface support"
-		depends on USB_SUPPORT
-		default y
-		help
-		  Supported USB connected chipsets:
-		  BCM43235, BCM43236, BCM43238 (all in revision 3 only)
-		  BCM43143, BCM43242, BCM43566, BCM43569
+define KernelPackage/wl18xx
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for TI WL18xx
+  URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx
+  DEPENDS+= +kmod-wlcore +wl18xx-firmware
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko
+  AUTOLOAD:=$(call AutoProbe,wl18xx)
+endef
 
-	config BRCMFMAC_PCIE
-		bool "Enable PCIE bus interface support"
-		depends on PCI_SUPPORT
-		default y
-		help
-		  Supported PCIe connected chipsets:
-		  BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
+define KernelPackage/wl18xx/description
+ Kernel modules for TI WL18xx
+endef
 
-  endif
+
+ZD1211FW_NAME:=zd1211-firmware
+ZD1211FW_VERSION:=1.4
+define Download/zd1211rw
+  FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
+  URL:=@SF/zd1211/
+  MD5SUM:=19f28781d76569af8551c9d11294c870
+endef
+$(eval $(call Download,zd1211rw))
+
+define KernelPackage/zd1211rw
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Zydas ZD1211 support
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zydas/zd1211rw/zd1211rw.ko
+  AUTOLOAD:=$(call AutoProbe,zd1211rw)
 endef
 
+
+
 config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m)
 
 config-y:= \
@@ -1538,6 +1449,20 @@ config-y:= \
 	MAC80211_RC_MINSTREL_HT \
 	MAC80211_RC_MINSTREL_VHT \
 	MAC80211_RC_DEFAULT_MINSTREL \
+	WLAN_VENDOR_ADMTEK \
+	WLAN_VENDOR_ATH \
+	WLAN_VENDOR_ATMEL \
+	WLAN_VENDOR_BROADCOM \
+	WLAN_VENDOR_INTEL \
+	WLAN_VENDOR_INTERSIL \
+	WLAN_VENDOR_MARVELL \
+	WLAN_VENDOR_MEDIATEK \
+	WLAN_VENDOR_RALINK \
+	WLAN_VENDOR_REALTEK \
+	WLAN_VENDOR_RSI \
+	WLAN_VENDOR_ST \
+	WLAN_VENDOR_TI \
+	WLAN_VENDOR_ZYDAS \
 
 config-$(call config_package,cfg80211) += CFG80211
 
@@ -1554,6 +1479,16 @@ ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
 	ATH5K_DEBUG
 endif
 
+ifdef CONFIG_PACKAGE_MAC80211_TRACING
+  config-y += \
+	ATH10K_TRACING \
+	ATH6KL_TRACING \
+	ATH_TRACEPOINTS \
+	WIL6210_TRACING \
+	ATH5K_TRACER \
+	IWLWIFI_DEVICE_TRACING
+endif
+
 config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_CRYPT_CCMP LIB80211_CRYPT_TKIP
 
 config-$(call config_package,ath) += ATH_CARDS ATH_COMMON
@@ -1602,6 +1537,8 @@ config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE
 config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
 
 config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM
+config-$(call config_package,mt7601u) += MT7601U
+config-y += WL_MEDIATEK
 
 config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB
 config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI
@@ -1623,31 +1560,34 @@ config-$(call config_package,rt2800-pci) += RT2800PCI
 config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290
 
 config-$(call config_package,rt2800-usb) += RT2800USB
-config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX
+config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN
 
 config-$(call config_package,iwl-legacy) += IWLEGACY
 config-$(call config_package,iwl3945) += IWL3945
 config-$(call config_package,iwl4965) += IWL4965
-config-$(call config_package,iwlagn) += IWLWIFI IWLDVM
+config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM
+config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG
+config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS
 
-config-$(call config_package,net-libipw) += LIBIPW
-config-$(call config_package,net-ipw2100) += IPW2100
-config-$(call config_package,net-ipw2200) += IPW2200
+config-$(call config_package,libipw) += LIBIPW
+config-$(call config_package,ipw2100) += IPW2100
+config-$(call config_package,ipw2200) += IPW2200
 
 config-$(call config_package,p54-common) += P54_COMMON
 config-$(call config_package,p54-pci) += P54_PCI
 config-$(call config_package,p54-usb) += P54_USB
 config-$(call config_package,p54-spi) += P54_SPI
 
-config-$(call config_package,net-hermes) += HERMES
-config-$(call config_package,net-hermes-pci) += PCI_HERMES
-config-$(call config_package,net-hermes-plx) += PLX_HERMES
-config-$(call config_package,net-hermes-pcmcia) += PCMCIA_HERMES
+config-$(call config_package,hermes) += HERMES
+config-$(call config_package,hermes-pci) += PCI_HERMES
+config-$(call config_package,hermes-plx) += PLX_HERMES
+config-$(call config_package,hermes-pcmcia) += PCMCIA_HERMES
 config-y += HERMES_PRISM
 
 config-$(call config_package,adm8211) += ADM8211
 config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO
 config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB
+config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI
 config-$(call config_package,mwl8k) += MWL8K
 config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE
 config-$(call config_package,rtl8180) += RTL8180
@@ -1668,12 +1608,15 @@ config-$(call config_package,rtl8192de) += RTL8192DE
 config-$(call config_package,rtl8192cu) += RTL8192CU
 config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG
 
+config-$(call config_package,rtl8xxxu) += RTL8XXXU
+config-y += RTL8XXXU_UNTESTED
+
 config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS
 
 MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \
 	CROSS_COMPILE="$(KERNEL_CROSS)" \
 	ARCH="$(LINUX_KARCH)" \
-	EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include" \
+	EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS)" \
 	KLIB_BUILD="$(LINUX_DIR)" \
 	MODPROBE=true \
 	KLIB=$(TARGET_MODULES_DIR) \
@@ -1702,8 +1645,6 @@ define Build/Prepare
 	$(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
 	$(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
 	$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
-	$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_LINUX_FIRMWARE_SOURCE)
-	$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE)
 	rm -rf \
 		$(PKG_BUILD_DIR)/include/linux/ssb \
 		$(PKG_BUILD_DIR)/include/linux/bcma \
@@ -1715,7 +1656,8 @@ define Build/Prepare
 		$(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \
 		$(PKG_BUILD_DIR)/include/linux/wl12xx.h \
 		$(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h \
-		$(PKG_BUILD_DIR)/include/net/ieee80211.h
+		$(PKG_BUILD_DIR)/include/net/ieee80211.h \
+		$(PKG_BUILD_DIR)/backport-include/linux/bcm47xx_nvram.h
 
 	echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version
 	$(CP) ./files/regdb.txt $(PKG_BUILD_DIR)/net/wireless/db.txt
@@ -1753,220 +1695,6 @@ define Build/InstallDev
 	rm -f $(1)/usr/include/mac80211-backport/linux/module.h
 endef
 
-define KernelPackage/libertas-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware/libertas
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8388_v9.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8682.bin \
-		$(1)/lib/firmware/libertas/
-endef
-
-define KernelPackage/libertas-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/libertas
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385_helper.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9_helper.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688_helper.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688.bin \
-		$(1)/lib/firmware/libertas
-endef
-
-define KernelPackage/cfg80211/install
-	$(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless
-	$(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi
-	$(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless
-endef
-
-define KernelPackage/p54-pci/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(DL_DIR)/$(P54PCIFW) $(1)/lib/firmware/isl3886pci
-endef
-
-define KernelPackage/p54-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb
-endef
-
-define KernelPackage/p54-spi/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm
-endef
-
-define KernelPackage/rt61-pci/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561s.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2661.bin \
-		$(1)/lib/firmware/
-endef
-
-define KernelPackage/rt73-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt73.bin $(1)/lib/firmware/
-endef
-
-define KernelPackage/rt2800-pci/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2860.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt3290.bin \
-		$(1)/lib/firmware
-endef
-
-define KernelPackage/rt2800-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2870.bin $(1)/lib/firmware/
-endef
-
-define KernelPackage/wl12xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-mr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-plt.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-sr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl1271-nvs.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-mr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-plt.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-sr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-nvs.bin \
-		$(1)/lib/firmware/ti-connectivity
-endef
-
-define KernelPackage/wl18xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-conf.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-fw-3.bin \
-		$(1)/lib/firmware/ti-connectivity
-endef
-
-define KernelPackage/zd1211rw/install
-	$(INSTALL_DIR) $(1)/lib/firmware/zd1211
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211
-endef
-
-define KernelPackage/carl9170/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/carl9170-1.fw $(1)/lib/firmware
-endef
-
-define KernelPackage/ath9k-htc/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_9271.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_7010.fw \
-		$(1)/lib/firmware/
-endef
-
-define KernelPackage/ath10k/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/ath10k/QCA988X/hw2.0/board.bin \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
-ifeq ($(CONFIG_ATH10K_STA_FW),y)
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/main/firmware-2.bin_999.999.0.636 \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
-else ifeq ($(CONFIG_ATH10K_API2_FW),y)
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/10.1/firmware-2.bin_10.1.467.2-1 \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
-else
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/10.2.4/firmware-4.bin_10.2.4.45 \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-4.bin
-endif
-endef
-
-define KernelPackage/mwl8k/install
-	$(INSTALL_DIR) $(1)/lib/firmware/mwl8k
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366_ap-3.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8366.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8687.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8687.fw \
-		$(1)/lib/firmware/mwl8k/
-endef
-
-define KernelPackage/mwifiex-pcie/install
-	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mrvl/pcie8897_uapsta.bin \
-		$(1)/lib/firmware/mrvl/
-endef
-
-define KernelPackage/net-ipw2100/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware
-endef
-
-define KernelPackage/net-ipw2200/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware
-endef
-
-define KernelPackage/iwlagn/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-ifneq ($(CONFIG_IWL5000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5000-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL5150_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5150-2.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL1000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-1000-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000-4.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6050_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6050-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6005_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2a-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6030_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2b-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL7260_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7260-9.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL7265_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7265-9.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL100_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-100-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL2000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2000-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL2030_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2030-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL105_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-105-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL135_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-135-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL3160_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3160-9.ucode $(1)/lib/firmware
-endif
-endef
-
-define KernelPackage/iwl3945/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3945-2.ucode $(1)/lib/firmware
-endef
-
-define KernelPackage/iwl4965/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-4965-2.ucode $(1)/lib/firmware
-endef
 
 define KernelPackage/b43/install
 	rm -rf $(1)/lib/firmware/
@@ -1990,51 +1718,85 @@ ifneq ($(CONFIG_B43_FW_SQUASH),)
 endif
 endef
 
-define KernelPackage/b43legacy/install
-	$(INSTALL_DIR) $(1)/lib/firmware/
-	b43-fwcutter --unsupported -w $(1)/lib/firmware/ $(DL_DIR)/$(PKG_B43_FWV3_SOURCE)
-ifneq ($(CONFIG_B43LEGACY_FW_SQUASH),)
-	b43-fwsquash.py "G" "$(CONFIG_B43LEGACY_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43legacy"
-endif
-endef
-
 define KernelPackage/brcmsmac/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y)
 	tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)"
 	b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT)
-else
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx-0.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx_hdr-0.fw \
-		$(1)/lib/firmware/brcm/
 endif
 endef
 
-define KernelPackage/brcmfmac/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-ifneq ($(CONFIG_BRCMFMAC_USB),)
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43236b.bin \
-		$(1)/lib/firmware/brcm/
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43143.bin \
-		$(1)/lib/firmware/brcm/
-endif
-ifneq ($(CONFIG_BRCMFMAC_PCIE),)
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43602-pcie.ap.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43602-pcie.bin
-endif
+define KernelPackage/cfg80211/install
+	$(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless
+	$(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi
+	$(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless
+endef
+
+define KernelPackage/ipw2100/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware
+endef
+
+define KernelPackage/ipw2200/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware
+endef
+
+define KernelPackage/p54-pci/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(P54PCIFW) $(1)/lib/firmware/isl3886pci
+endef
+
+define KernelPackage/p54-usb/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb
+endef
+
+define KernelPackage/p54-spi/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm
 endef
 
+define KernelPackage/zd1211rw/install
+	$(INSTALL_DIR) $(1)/lib/firmware/zd1211
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211
+endef
+
+
 $(eval $(call KernelPackage,adm8211))
+$(eval $(call KernelPackage,ath))
+$(eval $(call KernelPackage,ath10k))
 $(eval $(call KernelPackage,ath5k))
+$(eval $(call KernelPackage,ath9k))
+$(eval $(call KernelPackage,ath9k-common))
+$(eval $(call KernelPackage,ath9k-htc))
+$(eval $(call KernelPackage,b43))
+$(eval $(call KernelPackage,b43legacy))
+$(eval $(call KernelPackage,brcmsmac))
+$(eval $(call KernelPackage,brcmfmac))
+$(eval $(call KernelPackage,brcmutil))
+$(eval $(call KernelPackage,carl9170))
+$(eval $(call KernelPackage,cfg80211))
+$(eval $(call KernelPackage,hermes))
+$(eval $(call KernelPackage,hermes-pci))
+$(eval $(call KernelPackage,hermes-plx))
+$(eval $(call KernelPackage,hermes-pcmcia))
+$(eval $(call KernelPackage,iwlwifi))
+$(eval $(call KernelPackage,iwl-legacy))
+$(eval $(call KernelPackage,iwl4965))
+$(eval $(call KernelPackage,iwl3945))
 $(eval $(call KernelPackage,lib80211))
 $(eval $(call KernelPackage,libertas-usb))
 $(eval $(call KernelPackage,libertas-sdio))
-$(eval $(call KernelPackage,cfg80211))
+$(eval $(call KernelPackage,libertas-spi))
+$(eval $(call KernelPackage,libipw))
+$(eval $(call KernelPackage,ipw2100))
+$(eval $(call KernelPackage,ipw2200))
 $(eval $(call KernelPackage,mac80211))
+$(eval $(call KernelPackage,mac80211-hwsim))
+$(eval $(call KernelPackage,mt7601u))
+$(eval $(call KernelPackage,mwl8k))
+$(eval $(call KernelPackage,mwifiex-pcie))
 $(eval $(call KernelPackage,p54-common))
 $(eval $(call KernelPackage,p54-pci))
 $(eval $(call KernelPackage,p54-usb))
@@ -2047,12 +1809,12 @@ $(eval $(call KernelPackage,rt2800-lib))
 $(eval $(call KernelPackage,rt2400-pci))
 $(eval $(call KernelPackage,rt2500-pci))
 $(eval $(call KernelPackage,rt2500-usb))
-$(eval $(call KernelPackage,rt61-pci))
-$(eval $(call KernelPackage,rt73-usb))
 $(eval $(call KernelPackage,rt2800-mmio))
 $(eval $(call KernelPackage,rt2800-soc))
 $(eval $(call KernelPackage,rt2800-pci))
 $(eval $(call KernelPackage,rt2800-usb))
+$(eval $(call KernelPackage,rt61-pci))
+$(eval $(call KernelPackage,rt73-usb))
 $(eval $(call KernelPackage,rtl8180))
 $(eval $(call KernelPackage,rtl8187))
 $(eval $(call KernelPackage,rtlwifi))
@@ -2063,32 +1825,8 @@ $(eval $(call KernelPackage,rtl8192ce))
 $(eval $(call KernelPackage,rtl8192se))
 $(eval $(call KernelPackage,rtl8192de))
 $(eval $(call KernelPackage,rtl8192cu))
-$(eval $(call KernelPackage,zd1211rw))
-$(eval $(call KernelPackage,mac80211-hwsim))
-$(eval $(call KernelPackage,ath9k-common))
-$(eval $(call KernelPackage,ath9k))
-$(eval $(call KernelPackage,ath9k-htc))
-$(eval $(call KernelPackage,ath10k))
-$(eval $(call KernelPackage,ath))
-$(eval $(call KernelPackage,carl9170))
-$(eval $(call KernelPackage,b43))
-$(eval $(call KernelPackage,b43legacy))
-$(eval $(call KernelPackage,brcmutil))
-$(eval $(call KernelPackage,brcmsmac))
-$(eval $(call KernelPackage,brcmfmac))
-$(eval $(call KernelPackage,net-libipw))
-$(eval $(call KernelPackage,net-ipw2100))
-$(eval $(call KernelPackage,net-ipw2200))
-$(eval $(call KernelPackage,iwlagn))
-$(eval $(call KernelPackage,iwl-legacy))
-$(eval $(call KernelPackage,iwl4965))
-$(eval $(call KernelPackage,iwl3945))
-$(eval $(call KernelPackage,mwl8k))
-$(eval $(call KernelPackage,mwifiex-pcie))
-$(eval $(call KernelPackage,net-hermes))
-$(eval $(call KernelPackage,net-hermes-pci))
-$(eval $(call KernelPackage,net-hermes-plx))
-$(eval $(call KernelPackage,net-hermes-pcmcia))
+$(eval $(call KernelPackage,rtl8xxxu))
 $(eval $(call KernelPackage,wlcore))
 $(eval $(call KernelPackage,wl12xx))
 $(eval $(call KernelPackage,wl18xx))
+$(eval $(call KernelPackage,zd1211rw))
diff --git a/package/kernel/mac80211/patches/001-fix_build.patch b/package/kernel/mac80211/patches/001-fix_build.patch
index 818983e06e..402649d2cc 100644
--- a/package/kernel/mac80211/patches/001-fix_build.patch
+++ b/package/kernel/mac80211/patches/001-fix_build.patch
@@ -27,7 +27,7 @@
  	@set -e ; test -f .local-symbols || (						\
  	echo "/--------------"								;\
  	echo "| You shouldn't run make in the backports tree, but only in"		;\
-@@ -60,56 +62,60 @@ mrproper:
+@@ -60,57 +62,61 @@ mrproper:
  	echo "| (that isn't currently running.)"					;\
  	echo "\\--"									;\
  	false)
@@ -56,11 +56,12 @@
 -			done								\
 -		) > Kconfig.kernel							;\
 -		kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
--			sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d')			;\
+-			sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
 -		test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 -		test "$$kver" != ""							;\
 -		kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\
--		kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')"				;\
+-		kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')"				;\
+-		kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')"				;\
 -		print=0									;\
 -		for v in $$kvers ; do							\
 -			if [ "$$print" = "1" ] ; then					\
@@ -111,11 +112,12 @@
 +
 +Kconfig.versions: Kconfig.kernel
 +	@kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
-+		sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d')			;\
++		sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
 +	test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 +	test "$$kver" != ""							;\
 +	kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\
-+	kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')"				;\
++	kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')"				;\
++	kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')"				;\
 +	print=0									;\
 +	for v in $$kvers ; do							\
 +		if [ "$$print" = "1" ] ; then					\
diff --git a/package/kernel/mac80211/patches/002-change_allconfig.patch b/package/kernel/mac80211/patches/002-change_allconfig.patch
index 91ad20f06d..bd5bebfa45 100644
--- a/package/kernel/mac80211/patches/002-change_allconfig.patch
+++ b/package/kernel/mac80211/patches/002-change_allconfig.patch
@@ -1,6 +1,6 @@
 --- a/kconf/conf.c
 +++ b/kconf/conf.c
-@@ -578,40 +578,12 @@ int main(int ac, char **av)
+@@ -593,40 +593,12 @@ int main(int ac, char **av)
  	case oldconfig:
  	case listnewconfig:
  	case olddefconfig:
@@ -42,3 +42,23 @@
  		break;
  	default:
  		break;
+--- a/kconf/confdata.c
++++ b/kconf/confdata.c
+@@ -1169,6 +1169,8 @@ bool conf_set_all_new_symbols(enum conf_
+ 	}
+ 	bool has_changed = false;
+ 
++	sym_clear_all_valid();
++
+ 	for_all_symbols(i, sym) {
+ 		if (sym_has_value(sym) || (sym->flags & SYMBOL_VALID))
+ 			continue;
+@@ -1212,8 +1214,6 @@ bool conf_set_all_new_symbols(enum conf_
+ 
+ 	}
+ 
+-	sym_clear_all_valid();
+-
+ 	/*
+ 	 * We have different type of choice blocks.
+ 	 * If curr.tri equals to mod then we can select several
diff --git a/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch b/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch
new file mode 100644
index 0000000000..9adfd8f719
--- /dev/null
+++ b/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch
@@ -0,0 +1,21 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 28 Jan 2016 15:16:35 +0100
+Subject: [PATCH] backports: add skb_free_frag()
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/backport-include/linux/skbuff.h
++++ b/backport-include/linux/skbuff.h
+@@ -300,4 +300,11 @@ int skb_ensure_writable(struct sk_buff *
+ 
+ #endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0)
++static inline void skb_free_frag(void *data)
++{
++	put_page(virt_to_head_page(data));
++}
++#endif
++
+ #endif /* __BACKPORT_SKBUFF_H */
diff --git a/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch b/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch
deleted file mode 100644
index d48a723443..0000000000
--- a/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/backport-include/linux/debugfs.h
-+++ b/backport-include/linux/debugfs.h
-@@ -3,6 +3,7 @@
- #include_next <linux/debugfs.h>
- #include <linux/version.h>
- #include <generated/utsrelease.h>
-+#include <linux/device.h>
- 
- #if defined(CONFIG_DEBUG_FS)
- struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name,
diff --git a/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch b/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch
new file mode 100644
index 0000000000..9b672a8d14
--- /dev/null
+++ b/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 28 Jan 2016 15:19:22 +0100
+Subject: [PATCH] backports: add napi_alloc_frag
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/backport-include/linux/netdevice.h
++++ b/backport-include/linux/netdevice.h
+@@ -232,6 +232,10 @@ static inline void backport_unregister_n
+ #define unregister_netdevice_many LINUX_BACKPORT(unregister_netdevice_many)
+ #endif
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)
++#define napi_alloc_frag netdev_alloc_frag
++#endif
++
+ /*
+  * Complicated way of saying: We only backport netdev_rss_key stuff on kernels
+  * that either already have net_get_random_once() (>= 3.13) or where we've been
diff --git a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch b/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch
deleted file mode 100644
index e07f323190..0000000000
--- a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1858,6 +1858,13 @@ void ieee80211_remove_interfaces(struct
- 	}
- 	mutex_unlock(&local->iflist_mtx);
- 	unregister_netdevice_many(&unreg_list);
-+#if (!(LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,45) && \
-+       LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)) && \
-+     !(LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,9) && \
-+       LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)) && \
-+     (LINUX_VERSION_CODE < KERNEL_VERSION(3,16,0)))
-+	list_del(&unreg_list);
-+#endif
- 
- 	list_for_each_entry_safe(sdata, tmp, &wdev_list, list) {
- 		list_del(&sdata->list);
diff --git a/package/kernel/mac80211/patches/020-add_mpls_h.patch b/package/kernel/mac80211/patches/020-add_mpls_h.patch
deleted file mode 100644
index e5310bc120..0000000000
--- a/package/kernel/mac80211/patches/020-add_mpls_h.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- /dev/null
-+++ b/include/uapi/linux/mpls.h
-@@ -0,0 +1,34 @@
-+#ifndef _UAPI_MPLS_H
-+#define _UAPI_MPLS_H
-+
-+#include <linux/types.h>
-+#include <asm/byteorder.h>
-+
-+/* Reference: RFC 5462, RFC 3032
-+ *
-+ *  0                   1                   2                   3
-+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |                Label                  | TC  |S|       TTL     |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ *
-+ *	Label:  Label Value, 20 bits
-+ *	TC:     Traffic Class field, 3 bits
-+ *	S:      Bottom of Stack, 1 bit
-+ *	TTL:    Time to Live, 8 bits
-+ */
-+
-+struct mpls_label {
-+	__be32 entry;
-+};
-+
-+#define MPLS_LS_LABEL_MASK      0xFFFFF000
-+#define MPLS_LS_LABEL_SHIFT     12
-+#define MPLS_LS_TC_MASK         0x00000E00
-+#define MPLS_LS_TC_SHIFT        9
-+#define MPLS_LS_S_MASK          0x00000100
-+#define MPLS_LS_S_SHIFT         8
-+#define MPLS_LS_TTL_MASK        0x000000FF
-+#define MPLS_LS_TTL_SHIFT       0
-+
-+#endif /* _UAPI_MPLS_H */
diff --git a/package/kernel/mac80211/patches/030-rt2x00_options.patch b/package/kernel/mac80211/patches/030-rt2x00_options.patch
index 35b5b5deb2..a4ca8848c6 100644
--- a/package/kernel/mac80211/patches/030-rt2x00_options.patch
+++ b/package/kernel/mac80211/patches/030-rt2x00_options.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
 @@ -225,36 +225,37 @@ config RT2800SOC
  
  
@@ -43,5 +43,5 @@
 -	tristate
 +	tristate "RT2x00 support"
  	depends on m
- 	select BPAUTO_AVERAGE
  
+ config RT2X00_LIB_FIRMWARE
diff --git a/package/kernel/mac80211/patches/040-brcmutil_option.patch b/package/kernel/mac80211/patches/040-brcmutil_option.patch
index 8a6cae6122..167332d916 100644
--- a/package/kernel/mac80211/patches/040-brcmutil_option.patch
+++ b/package/kernel/mac80211/patches/040-brcmutil_option.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/brcm80211/Kconfig
-+++ b/drivers/net/wireless/brcm80211/Kconfig
+--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
++++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
 @@ -1,5 +1,5 @@
  config BRCMUTIL
 -	tristate
diff --git a/package/kernel/mac80211/patches/045-bcma-from-4.1.patch b/package/kernel/mac80211/patches/045-bcma-from-4.1.patch
deleted file mode 100644
index dce217f5cc..0000000000
--- a/package/kernel/mac80211/patches/045-bcma-from-4.1.patch
+++ /dev/null
@@ -1,104 +0,0 @@
---- a/drivers/bcma/driver_pci.c
-+++ b/drivers/bcma/driver_pci.c
-@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
- }
- EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
- 
--int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
--			  bool enable)
--{
--	struct pci_dev *pdev;
--	u32 coremask, tmp;
--	int err = 0;
--
--	if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
--		/* This bcma device is not on a PCI host-bus. So the IRQs are
--		 * not routed through the PCI core.
--		 * So we must not enable routing through the PCI core. */
--		goto out;
--	}
--
--	pdev = bus->host_pci;
--
--	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
--	if (err)
--		goto out;
--
--	coremask = BIT(core->core_index) << 8;
--	if (enable)
--		tmp |= coremask;
--	else
--		tmp &= ~coremask;
--
--	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
--
--out:
--	return err;
--}
--EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
--
- static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
- {
- 	u32 w;
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -351,3 +351,37 @@ void bcma_host_pci_down(struct bcma_bus
- 		bcma_core_pci_down(&bus->drv_pci[0]);
- }
- EXPORT_SYMBOL_GPL(bcma_host_pci_down);
-+
-+/* See also si_pci_setup */
-+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
-+			  bool enable)
-+{
-+	struct pci_dev *pdev;
-+	u32 coremask, tmp;
-+	int err = 0;
-+
-+	if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
-+		/* This bcma device is not on a PCI host-bus. So the IRQs are
-+		 * not routed through the PCI core.
-+		 * So we must not enable routing through the PCI core. */
-+		goto out;
-+	}
-+
-+	pdev = bus->host_pci;
-+
-+	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
-+	if (err)
-+		goto out;
-+
-+	coremask = BIT(core->core_index) << 8;
-+	if (enable)
-+		tmp |= coremask;
-+	else
-+		tmp &= ~coremask;
-+
-+	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
-+
-+out:
-+	return err;
-+}
-+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct
- 	switch (dev->dev->bus_type) {
- #ifdef CPTCFG_B43_BCMA
- 	case B43_BUS_BCMA:
--		bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
-+		bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
- 				      dev->dev->bdev, true);
- 		bcma_host_pci_up(dev->dev->bdev->bus);
- 		break;
---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
-@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_
- 	 * Configure pci/pcmcia here instead of in brcms_c_attach()
- 	 * to allow mfg hotswap:  down, hotswap (chip power cycle), up.
- 	 */
--	bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
-+	bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
- 			      true);
- 
- 	/*
diff --git a/package/kernel/mac80211/patches/050-lib80211_option.patch b/package/kernel/mac80211/patches/050-lib80211_option.patch
index 5fe5558a12..3fc8c05207 100644
--- a/package/kernel/mac80211/patches/050-lib80211_option.patch
+++ b/package/kernel/mac80211/patches/050-lib80211_option.patch
@@ -1,6 +1,6 @@
 --- a/net/wireless/Kconfig
 +++ b/net/wireless/Kconfig
-@@ -174,7 +174,7 @@ config CFG80211_WEXT_EXPORT
+@@ -171,7 +171,7 @@ config CFG80211_WEXT_EXPORT
  	  wext compatibility symbols to be exported.
  
  config LIB80211
@@ -9,7 +9,7 @@
  	depends on m
  	default n
  	help
-@@ -184,15 +184,15 @@ config LIB80211
+@@ -181,15 +181,15 @@ config LIB80211
  	  Drivers should select this themselves if needed.
  
  config LIB80211_CRYPT_WEP
diff --git a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
index d3079491dc..fd1e1cff30 100644
--- a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
+++ b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
@@ -1,9 +1,9 @@
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -344,40 +344,3 @@ USB_CDC_PHONET=
- USB_IPHETH=
+@@ -476,44 +476,6 @@ USB_IPHETH=
  USB_SIERRA_NET=
  USB_VL600=
+ USB_NET_CH9200=
 -SSB_POSSIBLE=
 -SSB=
 -SSB_SPROM=
@@ -15,6 +15,7 @@
 -SSB_PCMCIAHOST=
 -SSB_SDIOHOST_POSSIBLE=
 -SSB_SDIOHOST=
+-SSB_HOST_SOC=
 -SSB_SILENT=
 -SSB_DEBUG=
 -SSB_SERIAL=
@@ -32,28 +33,20 @@
 -BCMA_BLOCKIO=
 -BCMA_HOST_PCI_POSSIBLE=
 -BCMA_HOST_PCI=
--BCMA_DRIVER_PCI_HOSTMODE=
 -BCMA_HOST_SOC=
 -BCMA_DRIVER_PCI=
+-BCMA_DRIVER_PCI_HOSTMODE=
 -BCMA_DRIVER_MIPS=
 -BCMA_SFLASH=
 -BCMA_NFLASH=
 -BCMA_DRIVER_GMAC_CMN=
 -BCMA_DRIVER_GPIO=
 -BCMA_DEBUG=
---- a/Makefile.kernel
-+++ b/Makefile.kernel
-@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
- obj-$(CPTCFG_WLAN) += drivers/net/wireless/
- #obj-$(CPTCFG_BT) += net/bluetooth/
- #obj-$(CPTCFG_BT) += drivers/bluetooth/
--obj-$(CPTCFG_SSB) += drivers/ssb/
--obj-$(CPTCFG_BCMA) += drivers/bcma/
- #obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
- obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
- #obj-$(CPTCFG_NFC) += net/nfc/
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+ NFC=
+ NFC_DIGITAL=
+ NFC_NCI=
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
 @@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d
  {
  	struct ssb_bus *bus = dev->dev->sdev->bus;
@@ -63,7 +56,7 @@
  	return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
  #else
  	return bus->chipco.dev;
-@@ -4907,7 +4907,7 @@ static int b43_wireless_core_init(struct
+@@ -4903,7 +4903,7 @@ static int b43_wireless_core_init(struct
  	}
  	if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
  		hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
@@ -72,8 +65,8 @@
  	if (dev->dev->bus_type == B43_BUS_SSB &&
  	    dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
  	    dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
---- a/drivers/net/wireless/b43legacy/main.c
-+++ b/drivers/net/wireless/b43legacy/main.c
+--- a/drivers/net/wireless/broadcom/b43legacy/main.c
++++ b/drivers/net/wireless/broadcom/b43legacy/main.c
 @@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4
  	if (dev->dev->id.revision >= 2)
  		mask  |= 0x0010; /* FIXME: This is redundant. */
@@ -92,8 +85,8 @@
  	pcidev = bus->pcicore.dev;
  #endif
  	gpiodev = bus->chipco.dev ? : pcidev;
---- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
 @@ -43,6 +43,6 @@ brcmsmac-y := \
  	brcms_trace_events.o \
  	debug.o
@@ -102,8 +95,8 @@
 +brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
  
  obj-$(CPTCFG_BRCMSMAC)	+= brcmsmac.o
---- a/drivers/net/wireless/brcm80211/brcmsmac/led.h
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/led.h
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
 @@ -22,7 +22,7 @@ struct brcms_led {
  	bool active_low;
  };
@@ -116,12 +109,23 @@
 --- a/Kconfig.sources
 +++ b/Kconfig.sources
 @@ -9,9 +9,6 @@ source "$BACKPORT_DIR/drivers/net/wirele
- #source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
+ source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
  source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
  
 -source "$BACKPORT_DIR/drivers/ssb/Kconfig"
 -source "$BACKPORT_DIR/drivers/bcma/Kconfig"
 -
- #source "$BACKPORT_DIR/net/nfc/Kconfig"
+ source "$BACKPORT_DIR/net/nfc/Kconfig"
  
- #source "$BACKPORT_DIR/drivers/media/Kconfig"
+ source "$BACKPORT_DIR/drivers/media/Kconfig"
+--- a/Makefile.kernel
++++ b/Makefile.kernel
+@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
+ obj-$(CPTCFG_WLAN) += drivers/net/wireless/
+ obj-$(CPTCFG_BT) += net/bluetooth/
+ obj-$(CPTCFG_BT) += drivers/bluetooth/
+-obj-$(CPTCFG_SSB) += drivers/ssb/
+-obj-$(CPTCFG_BCMA) += drivers/bcma/
+ obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
+ obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
+ obj-$(CPTCFG_NFC) += net/nfc/
diff --git a/package/kernel/mac80211/patches/070-ath_common_config.patch b/package/kernel/mac80211/patches/070-ath_common_config.patch
index c6e9cd8515..41774fe53e 100644
--- a/package/kernel/mac80211/patches/070-ath_common_config.patch
+++ b/package/kernel/mac80211/patches/070-ath_common_config.patch
@@ -1,10 +1,9 @@
 --- a/drivers/net/wireless/ath/Kconfig
 +++ b/drivers/net/wireless/ath/Kconfig
-@@ -6,6 +6,7 @@ menuconfig ATH_CARDS
- 	tristate "Atheros Wireless Cards"
+@@ -1,5 +1,5 @@
+ config ATH_COMMON
+-	tristate
++	tristate "ath.ko"
  	depends on m
- 	depends on CFG80211 && (!UML || BROKEN)
-+	select ATH_COMMON
- 	---help---
- 	  This will enable the support for the Atheros wireless drivers.
- 	  ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
+ 
+ config WLAN_VENDOR_ATH
diff --git a/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch b/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch
deleted file mode 100644
index 85c52807fe..0000000000
--- a/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/backport-include/linux/wait.h
-+++ b/backport-include/linux/wait.h
-@@ -23,7 +23,7 @@ backport_wait_on_bit_io(void *word, int
- 
- #endif
- 
--#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12)
- #define WQ_FLAG_WOKEN		0x02
- 
- #define wait_woken LINUX_BACKPORT(wait_woken)
---- a/compat/backport-3.19.c
-+++ b/compat/backport-3.19.c
-@@ -15,6 +15,7 @@
- #include <linux/netdevice.h>
- #include <linux/debugfs.h>
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12)
- static inline bool is_kthread_should_stop(void)
- {
- 	return (current->flags & PF_KTHREAD) && kthread_should_stop();
-@@ -79,6 +80,7 @@ int woken_wake_function(wait_queue_t *wa
- 	return default_wake_function(wait, mode, sync, key);
- }
- EXPORT_SYMBOL(woken_wake_function);
-+#endif
- 
- #ifdef __BACKPORT_NETDEV_RSS_KEY_FILL
- u8 netdev_rss_key[NETDEV_RSS_KEY_LEN];
diff --git a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
new file mode 100644
index 0000000000..02f46c778d
--- /dev/null
+++ b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
@@ -0,0 +1,376 @@
+--- a/net/mac80211/Kconfig
++++ b/net/mac80211/Kconfig
+@@ -5,8 +5,6 @@ config MAC80211
+ 	depends on CRYPTO
+ 	depends on CRYPTO_ARC4
+ 	depends on CRYPTO_AES
+-	select BPAUTO_CRYPTO_CCM
+-	depends on CRYPTO_GCM
+ 	depends on CRC32
+ 	---help---
+ 	  This option enables the hardware independent IEEE 802.11
+--- a/net/mac80211/Makefile
++++ b/net/mac80211/Makefile
+@@ -16,9 +16,7 @@ mac80211-y := \
+ 	michael.o \
+ 	tkip.o \
+ 	aes_ccm.o \
+-	aes_gcm.o \
+ 	aes_cmac.o \
+-	aes_gmac.o \
+ 	cfg.o \
+ 	ethtool.o \
+ 	rx.o \
+--- a/net/mac80211/aes_ccm.c
++++ b/net/mac80211/aes_ccm.c
+@@ -13,89 +13,132 @@
+ #include <linux/types.h>
+ #include <linux/err.h>
+ #include <crypto/aead.h>
++#include <crypto/aes.h>
+ 
+ #include <net/mac80211.h>
+ #include "key.h"
+ #include "aes_ccm.h"
+ 
+-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
+-			       u8 *data, size_t data_len, u8 *mic,
+-			       size_t mic_len)
++static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, u8 *s_0,
++			    u8 *a, u8 *b)
+ {
+-	struct scatterlist sg[3];
++	int i;
++
++	crypto_cipher_encrypt_one(tfm, b, b_0);
++
++	/* Extra Authenticate-only data (always two AES blocks) */
++	for (i = 0; i < AES_BLOCK_SIZE; i++)
++		aad[i] ^= b[i];
++	crypto_cipher_encrypt_one(tfm, b, aad);
++
++	aad += AES_BLOCK_SIZE;
++
++	for (i = 0; i < AES_BLOCK_SIZE; i++)
++		aad[i] ^= b[i];
++	crypto_cipher_encrypt_one(tfm, a, aad);
+ 
+-	char aead_req_data[sizeof(struct aead_request) +
+-			   crypto_aead_reqsize(tfm)]
+-		__aligned(__alignof__(struct aead_request));
+-	struct aead_request *aead_req = (void *) aead_req_data;
++	/* Mask out bits from auth-only-b_0 */
++	b_0[0] &= 0x07;
+ 
+-	memset(aead_req, 0, sizeof(aead_req_data));
++	/* S_0 is used to encrypt T (= MIC) */
++	b_0[14] = 0;
++	b_0[15] = 0;
++	crypto_cipher_encrypt_one(tfm, s_0, b_0);
++}
+ 
+-	sg_init_table(sg, 3);
+-	sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
+-	sg_set_buf(&sg[1], data, data_len);
+-	sg_set_buf(&sg[2], mic, mic_len);
+ 
+-	aead_request_set_tfm(aead_req, tfm);
+-	aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
+-	aead_request_set_ad(aead_req, sg[0].length);
++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
++			       u8 *data, size_t data_len, u8 *mic,
++			       size_t mic_len)
++{
++	int i, j, last_len, num_blocks;
++	u8 b[AES_BLOCK_SIZE];
++	u8 s_0[AES_BLOCK_SIZE];
++	u8 e[AES_BLOCK_SIZE];
++	u8 *pos, *cpos;
++
++	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
++	last_len = data_len % AES_BLOCK_SIZE;
++	aes_ccm_prepare(tfm, b_0, aad, s_0, b, b);
++
++	/* Process payload blocks */
++	pos = data;
++	cpos = data;
++	for (j = 1; j <= num_blocks; j++) {
++		int blen = (j == num_blocks && last_len) ?
++			last_len : AES_BLOCK_SIZE;
++
++		/* Authentication followed by encryption */
++		for (i = 0; i < blen; i++)
++			b[i] ^= pos[i];
++		crypto_cipher_encrypt_one(tfm, b, b);
++
++		b_0[14] = (j >> 8) & 0xff;
++		b_0[15] = j & 0xff;
++		crypto_cipher_encrypt_one(tfm, e, b_0);
++		for (i = 0; i < blen; i++)
++			*cpos++ = *pos++ ^ e[i];
++	}
+ 
+-	crypto_aead_encrypt(aead_req);
++	for (i = 0; i < mic_len; i++)
++		mic[i] = b[i] ^ s_0[i];
+ }
+ 
+-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ 			      u8 *data, size_t data_len, u8 *mic,
+ 			      size_t mic_len)
+ {
+-	struct scatterlist sg[3];
+-	char aead_req_data[sizeof(struct aead_request) +
+-			   crypto_aead_reqsize(tfm)]
+-		__aligned(__alignof__(struct aead_request));
+-	struct aead_request *aead_req = (void *) aead_req_data;
+-
+-	if (data_len == 0)
+-		return -EINVAL;
+-
+-	memset(aead_req, 0, sizeof(aead_req_data));
+-
+-	sg_init_table(sg, 3);
+-	sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
+-	sg_set_buf(&sg[1], data, data_len);
+-	sg_set_buf(&sg[2], mic, mic_len);
+-
+-	aead_request_set_tfm(aead_req, tfm);
+-	aead_request_set_crypt(aead_req, sg, sg, data_len + mic_len, b_0);
+-	aead_request_set_ad(aead_req, sg[0].length);
++	int i, j, last_len, num_blocks;
++	u8 *pos, *cpos;
++	u8 a[AES_BLOCK_SIZE];
++	u8 b[AES_BLOCK_SIZE];
++	u8 s_0[AES_BLOCK_SIZE];
++
++	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
++	last_len = data_len % AES_BLOCK_SIZE;
++	aes_ccm_prepare(tfm, b_0, aad, s_0, a, b);
++
++	/* Process payload blocks */
++	cpos = data;
++	pos = data;
++	for (j = 1; j <= num_blocks; j++) {
++		int blen = (j == num_blocks && last_len) ?
++			last_len : AES_BLOCK_SIZE;
++
++		/* Decryption followed by authentication */
++		b_0[14] = (j >> 8) & 0xff;
++		b_0[15] = j & 0xff;
++		crypto_cipher_encrypt_one(tfm, b, b_0);
++		for (i = 0; i < blen; i++) {
++			*pos = *cpos++ ^ b[i];
++			a[i] ^= *pos++;
++		}
++		crypto_cipher_encrypt_one(tfm, a, a);
++	}
++
++	for (i = 0; i < mic_len; i++) {
++		if ((mic[i] ^ s_0[i]) != a[i])
++			return -1;
++	}
+ 
+-	return crypto_aead_decrypt(aead_req);
++	return 0;
+ }
+ 
+-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
+-						    size_t key_len,
+-						    size_t mic_len)
++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[],
++						      size_t key_len,
++						      size_t mic_len)
+ {
+-	struct crypto_aead *tfm;
+-	int err;
++	struct crypto_cipher *tfm;
+ 
+-	tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC);
+-	if (IS_ERR(tfm))
+-		return tfm;
+-
+-	err = crypto_aead_setkey(tfm, key, key_len);
+-	if (err)
+-		goto free_aead;
+-	err = crypto_aead_setauthsize(tfm, mic_len);
+-	if (err)
+-		goto free_aead;
++	tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
++	if (!IS_ERR(tfm))
++		crypto_cipher_setkey(tfm, key, key_len);
+ 
+ 	return tfm;
+-
+-free_aead:
+-	crypto_free_aead(tfm);
+-	return ERR_PTR(err);
+ }
+ 
+-void ieee80211_aes_key_free(struct crypto_aead *tfm)
++
++void ieee80211_aes_key_free(struct crypto_cipher *tfm)
+ {
+-	crypto_free_aead(tfm);
++	crypto_free_cipher(tfm);
+ }
+--- a/net/mac80211/aes_ccm.h
++++ b/net/mac80211/aes_ccm.h
+@@ -12,15 +12,15 @@
+ 
+ #include <linux/crypto.h>
+ 
+-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
+-						    size_t key_len,
+-						    size_t mic_len);
+-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[],
++						      size_t key_len,
++						      size_t mic_len);
++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ 			       u8 *data, size_t data_len, u8 *mic,
+ 			       size_t mic_len);
+-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ 			      u8 *data, size_t data_len, u8 *mic,
+ 			      size_t mic_len);
+-void ieee80211_aes_key_free(struct crypto_aead *tfm);
++void ieee80211_aes_key_free(struct crypto_cipher *tfm);
+ 
+ #endif /* AES_CCM_H */
+--- a/net/mac80211/aes_gcm.h
++++ b/net/mac80211/aes_gcm.h
+@@ -11,12 +11,28 @@
+ 
+ #include <linux/crypto.h>
+ 
+-void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
+-			       u8 *data, size_t data_len, u8 *mic);
+-int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
+-			      u8 *data, size_t data_len, u8 *mic);
+-struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
+-							size_t key_len);
+-void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm);
++static inline void
++ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
++			  u8 *data, size_t data_len, u8 *mic)
++{
++}
++
++static inline int
++ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
++			  u8 *data, size_t data_len, u8 *mic)
++{
++    return -EOPNOTSUPP;
++}
++
++static inline struct crypto_aead *
++ieee80211_aes_gcm_key_setup_encrypt(const u8 key[], size_t key_len)
++{
++    return NULL;
++}
++
++static inline void
++ieee80211_aes_gcm_key_free(struct crypto_aead *tfm)
++{
++}
+ 
+ #endif /* AES_GCM_H */
+--- a/net/mac80211/aes_gmac.h
++++ b/net/mac80211/aes_gmac.h
+@@ -11,10 +11,22 @@
+ 
+ #include <linux/crypto.h>
+ 
+-struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
+-						 size_t key_len);
+-int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
+-		       const u8 *data, size_t data_len, u8 *mic);
+-void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm);
++static inline struct crypto_aead *
++ieee80211_aes_gmac_key_setup(const u8 key[], size_t key_len)
++{
++	return NULL;
++}
++
++static inline int
++ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
++		   const u8 *data, size_t data_len, u8 *mic)
++{
++	return -EOPNOTSUPP;
++}
++
++static inline void
++ieee80211_aes_gmac_key_free(struct crypto_aead *tfm)
++{
++}
+ 
+ #endif /* AES_GMAC_H */
+--- a/net/mac80211/key.h
++++ b/net/mac80211/key.h
+@@ -84,7 +84,7 @@ struct ieee80211_key {
+ 			 * Management frames.
+ 			 */
+ 			u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
+-			struct crypto_aead *tfm;
++			struct crypto_cipher *tfm;
+ 			u32 replays; /* dot11RSNAStatsCCMPReplays */
+ 		} ccmp;
+ 		struct {
+--- a/net/mac80211/wpa.c
++++ b/net/mac80211/wpa.c
+@@ -307,7 +307,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
+ }
+ 
+ 
+-static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad)
++static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad,
++				u16 data_len)
+ {
+ 	__le16 mask_fc;
+ 	int a4_included, mgmt;
+@@ -337,14 +338,8 @@ static void ccmp_special_blocks(struct s
+ 	else
+ 		qos_tid = 0;
+ 
+-	/* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC
+-	 * mode authentication are not allowed to collide, yet both are derived
+-	 * from this vector b_0. We only set L := 1 here to indicate that the
+-	 * data size can be represented in (L+1) bytes. The CCM layer will take
+-	 * care of storing the data length in the top (L+1) bytes and setting
+-	 * and clearing the other bits as is required to derive the two IVs.
+-	 */
+-	b_0[0] = 0x1;
++	/* First block, b_0 */
++	b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */
+ 
+ 	/* Nonce: Nonce Flags | A2 | PN
+ 	 * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
+@@ -352,6 +347,8 @@ static void ccmp_special_blocks(struct s
+ 	b_0[1] = qos_tid | (mgmt << 4);
+ 	memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
+ 	memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
++	/* l(m) */
++	put_unaligned_be16(data_len, &b_0[14]);
+ 
+ 	/* AAD (extra authenticate-only data) / masked 802.11 header
+ 	 * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
+@@ -463,7 +460,7 @@ static int ccmp_encrypt_skb(struct ieee8
+ 		return 0;
+ 
+ 	pos += IEEE80211_CCMP_HDR_LEN;
+-	ccmp_special_blocks(skb, pn, b_0, aad);
++	ccmp_special_blocks(skb, pn, b_0, aad, len);
+ 	ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len,
+ 				  skb_put(skb, mic_len), mic_len);
+ 
+@@ -534,7 +531,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+ 			u8 aad[2 * AES_BLOCK_SIZE];
+ 			u8 b_0[AES_BLOCK_SIZE];
+ 			/* hardware didn't decrypt/verify MIC */
+-			ccmp_special_blocks(skb, pn, b_0, aad);
++			ccmp_special_blocks(skb, pn, b_0, aad, data_len);
+ 
+ 			if (ieee80211_aes_ccm_decrypt(
+ 				    key->u.ccmp.tfm, b_0, aad,
diff --git a/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch b/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch
deleted file mode 100644
index ceca9520f1..0000000000
--- a/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch
+++ /dev/null
@@ -1,2055 +0,0 @@
-This patch reverts the following commits from wireless-testing:
-
-8ade538bf39b1ee53418528fdacd36b8e65621b9
-56c52da2d554f081e8fce58ecbcf6a40c605b95b
-2b2ba0db1c820d04d5143452d70012cd44d7b578
-00b9cfa3ff38401bd70c34b250ca13e5ea347b4a
-4f031fa9f188b2b0641ac20087d9e16bcfb4e49d
-6e1ee5d2e9e411892b5d84e3ea93e3fc88ac786c
-30ef7ef9672d92ab2cac37f60a31955c118321e7
-f359d3fe832e49eeec2232b2af5a9e3aee6b4862 (only the changes in aes_cmac.{c,h})
-7ec7c4a9a686c608315739ab6a2b0527a240883c
----
-
---- a/include/linux/ieee80211.h
-+++ b/include/linux/ieee80211.h
-@@ -1017,15 +1017,6 @@ struct ieee80211_mmie {
- 	u8 mic[8];
- } __packed;
- 
--/* Management MIC information element (IEEE 802.11w) for GMAC and CMAC-256 */
--struct ieee80211_mmie_16 {
--	u8 element_id;
--	u8 length;
--	__le16 key_id;
--	u8 sequence_number[6];
--	u8 mic[16];
--} __packed;
--
- struct ieee80211_vendor_ie {
- 	u8 element_id;
- 	u8 len;
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -1306,8 +1306,8 @@ struct ieee80211_vif *wdev_to_ieee80211_
-  * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
-  *	that the key is pairwise rather then a shared key.
-  * @IEEE80211_KEY_FLAG_SW_MGMT_TX: This flag should be set by the driver for a
-- *	CCMP/GCMP key if it requires CCMP/GCMP encryption of management frames
-- *	(MFP) to be done in software.
-+ *	CCMP key if it requires CCMP encryption of management frames (MFP) to
-+ *	be done in software.
-  * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
-  *	if space should be prepared for the IV, but the IV
-  *	itself should not be generated. Do not set together with
-@@ -1322,7 +1322,7 @@ struct ieee80211_vif *wdev_to_ieee80211_
-  *	RX, if your crypto engine can't deal with TX you can also set the
-  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
-  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
-- *	driver for a CCMP/GCMP key to indicate that is requires IV generation
-+ *	driver for a CCMP key to indicate that is requires IV generation
-  *	only for managment frames (MFP).
-  * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
-  *	driver for a key to indicate that sufficient tailroom must always
-@@ -4112,10 +4112,6 @@ void ieee80211_aes_cmac_calculate_k1_k2(
-  *	reverse order than in packet)
-  * @aes_cmac: PN data, most significant byte first (big endian,
-  *	reverse order than in packet)
-- * @aes_gmac: PN data, most significant byte first (big endian,
-- *	reverse order than in packet)
-- * @gcmp: PN data, most significant byte first (big endian,
-- *	reverse order than in packet)
-  */
- struct ieee80211_key_seq {
- 	union {
-@@ -4129,12 +4125,6 @@ struct ieee80211_key_seq {
- 		struct {
- 			u8 pn[6];
- 		} aes_cmac;
--		struct {
--			u8 pn[6];
--		} aes_gmac;
--		struct {
--			u8 pn[6];
--		} gcmp;
- 	};
- };
- 
-@@ -4159,7 +4149,7 @@ void ieee80211_get_key_tx_seq(struct iee
-  * ieee80211_get_key_rx_seq - get key RX sequence counter
-  *
-  * @keyconf: the parameter passed with the set key
-- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
-+ * @tid: The TID, or -1 for the management frame value (CCMP only);
-  *	the value on TID 0 is also used for non-QoS frames. For
-  *	CMAC, only TID 0 is valid.
-  * @seq: buffer to receive the sequence data
-@@ -4195,7 +4185,7 @@ void ieee80211_set_key_tx_seq(struct iee
-  * ieee80211_set_key_rx_seq - set key RX sequence counter
-  *
-  * @keyconf: the parameter passed with the set key
-- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
-+ * @tid: The TID, or -1 for the management frame value (CCMP only);
-  *	the value on TID 0 is also used for non-QoS frames. For
-  *	CMAC, only TID 0 is valid.
-  * @seq: new sequence data
---- a/net/mac80211/Kconfig
-+++ b/net/mac80211/Kconfig
-@@ -5,8 +5,6 @@ config MAC80211
- 	depends on CRYPTO
- 	depends on CRYPTO_ARC4
- 	depends on CRYPTO_AES
--	select BPAUTO_CRYPTO_CCM
--	depends on CRYPTO_GCM
- 	depends on CRC32
- 	select BPAUTO_AVERAGE
- 	---help---
---- a/net/mac80211/Makefile
-+++ b/net/mac80211/Makefile
-@@ -15,9 +15,7 @@ mac80211-y := \
- 	michael.o \
- 	tkip.o \
- 	aes_ccm.o \
--	aes_gcm.o \
- 	aes_cmac.o \
--	aes_gmac.o \
- 	cfg.o \
- 	ethtool.o \
- 	rx.o \
---- a/net/mac80211/aes_ccm.c
-+++ b/net/mac80211/aes_ccm.c
-@@ -2,8 +2,6 @@
-  * Copyright 2003-2004, Instant802 Networks, Inc.
-  * Copyright 2005-2006, Devicescape Software, Inc.
-  *
-- * Rewrite: Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
-- *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-@@ -19,82 +17,134 @@
- #include "key.h"
- #include "aes_ccm.h"
- 
--void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic,
--			       size_t mic_len)
-+static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *scratch, u8 *a)
-+{
-+	int i;
-+	u8 *b_0, *aad, *b, *s_0;
-+
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+	aad = scratch + 4 * AES_BLOCK_SIZE;
-+	b = scratch;
-+	s_0 = scratch + AES_BLOCK_SIZE;
-+
-+	crypto_cipher_encrypt_one(tfm, b, b_0);
-+
-+	/* Extra Authenticate-only data (always two AES blocks) */
-+	for (i = 0; i < AES_BLOCK_SIZE; i++)
-+		aad[i] ^= b[i];
-+	crypto_cipher_encrypt_one(tfm, b, aad);
-+
-+	aad += AES_BLOCK_SIZE;
-+
-+	for (i = 0; i < AES_BLOCK_SIZE; i++)
-+		aad[i] ^= b[i];
-+	crypto_cipher_encrypt_one(tfm, a, aad);
-+
-+	/* Mask out bits from auth-only-b_0 */
-+	b_0[0] &= 0x07;
-+
-+	/* S_0 is used to encrypt T (= MIC) */
-+	b_0[14] = 0;
-+	b_0[15] = 0;
-+	crypto_cipher_encrypt_one(tfm, s_0, b_0);
-+}
-+
-+
-+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			       u8 *data, size_t data_len,
-+			       u8 *cdata, u8 *mic)
- {
--	struct scatterlist assoc, pt, ct[2];
-+	int i, j, last_len, num_blocks;
-+	u8 *pos, *cpos, *b, *s_0, *e, *b_0;
- 
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *) aead_req_data;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, mic_len);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, &pt, ct, data_len, b_0);
-+	b = scratch;
-+	s_0 = scratch + AES_BLOCK_SIZE;
-+	e = scratch + 2 * AES_BLOCK_SIZE;
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+
-+	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
-+	last_len = data_len % AES_BLOCK_SIZE;
-+	aes_ccm_prepare(tfm, scratch, b);
-+
-+	/* Process payload blocks */
-+	pos = data;
-+	cpos = cdata;
-+	for (j = 1; j <= num_blocks; j++) {
-+		int blen = (j == num_blocks && last_len) ?
-+			last_len : AES_BLOCK_SIZE;
-+
-+		/* Authentication followed by encryption */
-+		for (i = 0; i < blen; i++)
-+			b[i] ^= pos[i];
-+		crypto_cipher_encrypt_one(tfm, b, b);
-+
-+		b_0[14] = (j >> 8) & 0xff;
-+		b_0[15] = j & 0xff;
-+		crypto_cipher_encrypt_one(tfm, e, b_0);
-+		for (i = 0; i < blen; i++)
-+			*cpos++ = *pos++ ^ e[i];
-+	}
- 
--	crypto_aead_encrypt(aead_req);
-+	for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++)
-+		mic[i] = b[i] ^ s_0[i];
- }
- 
--int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic,
--			      size_t mic_len)
-+
-+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			      u8 *cdata, size_t data_len, u8 *mic, u8 *data)
- {
--	struct scatterlist assoc, pt, ct[2];
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *) aead_req_data;
--
--	if (data_len == 0)
--		return -EINVAL;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, mic_len);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, ct, &pt, data_len + mic_len, b_0);
-+	int i, j, last_len, num_blocks;
-+	u8 *pos, *cpos, *b, *s_0, *a, *b_0;
-+
-+	b = scratch;
-+	s_0 = scratch + AES_BLOCK_SIZE;
-+	a = scratch + 2 * AES_BLOCK_SIZE;
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+
-+	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
-+	last_len = data_len % AES_BLOCK_SIZE;
-+	aes_ccm_prepare(tfm, scratch, a);
-+
-+	/* Process payload blocks */
-+	cpos = cdata;
-+	pos = data;
-+	for (j = 1; j <= num_blocks; j++) {
-+		int blen = (j == num_blocks && last_len) ?
-+			last_len : AES_BLOCK_SIZE;
-+
-+		/* Decryption followed by authentication */
-+		b_0[14] = (j >> 8) & 0xff;
-+		b_0[15] = j & 0xff;
-+		crypto_cipher_encrypt_one(tfm, b, b_0);
-+		for (i = 0; i < blen; i++) {
-+			*pos = *cpos++ ^ b[i];
-+			a[i] ^= *pos++;
-+		}
-+		crypto_cipher_encrypt_one(tfm, a, a);
-+	}
-+
-+	for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++) {
-+		if ((mic[i] ^ s_0[i]) != a[i])
-+			return -1;
-+	}
- 
--	return crypto_aead_decrypt(aead_req);
-+	return 0;
- }
- 
--struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
--						    size_t key_len,
--						    size_t mic_len)
-+
-+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[])
- {
--	struct crypto_aead *tfm;
--	int err;
-+	struct crypto_cipher *tfm;
- 
--	tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC);
--	if (IS_ERR(tfm))
--		return tfm;
--
--	err = crypto_aead_setkey(tfm, key, key_len);
--	if (!err)
--		err = crypto_aead_setauthsize(tfm, mic_len);
--	if (!err)
--		return tfm;
-+	tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
-+	if (!IS_ERR(tfm))
-+		crypto_cipher_setkey(tfm, key, WLAN_KEY_LEN_CCMP);
- 
--	crypto_free_aead(tfm);
--	return ERR_PTR(err);
-+	return tfm;
- }
- 
--void ieee80211_aes_key_free(struct crypto_aead *tfm)
-+
-+void ieee80211_aes_key_free(struct crypto_cipher *tfm)
- {
--	crypto_free_aead(tfm);
-+	crypto_free_cipher(tfm);
- }
---- a/net/mac80211/aes_ccm.h
-+++ b/net/mac80211/aes_ccm.h
-@@ -12,15 +12,13 @@
- 
- #include <linux/crypto.h>
- 
--struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
--						    size_t key_len,
--						    size_t mic_len);
--void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic,
--			       size_t mic_len);
--int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic,
--			      size_t mic_len);
--void ieee80211_aes_key_free(struct crypto_aead *tfm);
-+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[]);
-+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			       u8 *data, size_t data_len,
-+			       u8 *cdata, u8 *mic);
-+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			      u8 *cdata, size_t data_len,
-+			      u8 *mic, u8 *data);
-+void ieee80211_aes_key_free(struct crypto_cipher *tfm);
- 
- #endif /* AES_CCM_H */
---- a/net/mac80211/aes_cmac.c
-+++ b/net/mac80211/aes_cmac.c
-@@ -18,8 +18,8 @@
- #include "key.h"
- #include "aes_cmac.h"
- 
-+#define AES_CMAC_KEY_LEN 16
- #define CMAC_TLEN 8 /* CMAC TLen = 64 bits (8 octets) */
--#define CMAC_TLEN_256 16 /* CMAC TLen = 128 bits (16 octets) */
- #define AAD_LEN 20
- 
- 
-@@ -35,9 +35,9 @@ static void gf_mulx(u8 *pad)
- 		pad[AES_BLOCK_SIZE - 1] ^= 0x87;
- }
- 
--static void aes_cmac_vector(struct crypto_cipher *tfm, size_t num_elem,
--			    const u8 *addr[], const size_t *len, u8 *mac,
--			    size_t mac_len)
-+
-+static void aes_128_cmac_vector(struct crypto_cipher *tfm, size_t num_elem,
-+				const u8 *addr[], const size_t *len, u8 *mac)
- {
- 	u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE];
- 	const u8 *pos, *end;
-@@ -88,7 +88,7 @@ static void aes_cmac_vector(struct crypt
- 	for (i = 0; i < AES_BLOCK_SIZE; i++)
- 		pad[i] ^= cbc[i];
- 	crypto_cipher_encrypt_one(tfm, pad, pad);
--	memcpy(mac, pad, mac_len);
-+	memcpy(mac, pad, CMAC_TLEN);
- }
- 
- 
-@@ -107,35 +107,17 @@ void ieee80211_aes_cmac(struct crypto_ci
- 	addr[2] = zero;
- 	len[2] = CMAC_TLEN;
- 
--	aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN);
-+	aes_128_cmac_vector(tfm, 3, addr, len, mic);
- }
- 
--void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad,
--			    const u8 *data, size_t data_len, u8 *mic)
--{
--	const u8 *addr[3];
--	size_t len[3];
--	u8 zero[CMAC_TLEN_256];
--
--	memset(zero, 0, CMAC_TLEN_256);
--	addr[0] = aad;
--	len[0] = AAD_LEN;
--	addr[1] = data;
--	len[1] = data_len - CMAC_TLEN_256;
--	addr[2] = zero;
--	len[2] = CMAC_TLEN_256;
--
--	aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN_256);
--}
- 
--struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[],
--						   size_t key_len)
-+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[])
- {
- 	struct crypto_cipher *tfm;
- 
- 	tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
- 	if (!IS_ERR(tfm))
--		crypto_cipher_setkey(tfm, key, key_len);
-+		crypto_cipher_setkey(tfm, key, AES_CMAC_KEY_LEN);
- 
- 	return tfm;
- }
---- a/net/mac80211/aes_cmac.h
-+++ b/net/mac80211/aes_cmac.h
-@@ -11,12 +11,9 @@
- 
- #include <linux/crypto.h>
- 
--struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[],
--						   size_t key_len);
-+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[]);
- void ieee80211_aes_cmac(struct crypto_cipher *tfm, const u8 *aad,
- 			const u8 *data, size_t data_len, u8 *mic);
--void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad,
--			    const u8 *data, size_t data_len, u8 *mic);
- void ieee80211_aes_cmac_key_free(struct crypto_cipher *tfm);
- 
- #endif /* AES_CMAC_H */
---- a/net/mac80211/aes_gcm.c
-+++ /dev/null
-@@ -1,95 +0,0 @@
--/*
-- * Copyright 2014-2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/crypto.h>
--#include <linux/err.h>
--#include <crypto/aes.h>
--
--#include <net/mac80211.h>
--#include "key.h"
--#include "aes_gcm.h"
--
--void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic)
--{
--	struct scatterlist assoc, pt, ct[2];
--
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *)aead_req_data;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, &pt, ct, data_len, j_0);
--
--	crypto_aead_encrypt(aead_req);
--}
--
--int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic)
--{
--	struct scatterlist assoc, pt, ct[2];
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *)aead_req_data;
--
--	if (data_len == 0)
--		return -EINVAL;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, ct, &pt,
--			       data_len + IEEE80211_GCMP_MIC_LEN, j_0);
--
--	return crypto_aead_decrypt(aead_req);
--}
--
--struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
--							size_t key_len)
--{
--	struct crypto_aead *tfm;
--	int err;
--
--	tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC);
--	if (IS_ERR(tfm))
--		return tfm;
--
--	err = crypto_aead_setkey(tfm, key, key_len);
--	if (!err)
--		err = crypto_aead_setauthsize(tfm, IEEE80211_GCMP_MIC_LEN);
--	if (!err)
--		return tfm;
--
--	crypto_free_aead(tfm);
--	return ERR_PTR(err);
--}
--
--void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm)
--{
--	crypto_free_aead(tfm);
--}
---- a/net/mac80211/aes_gcm.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/*
-- * Copyright 2014-2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef AES_GCM_H
--#define AES_GCM_H
--
--#include <linux/crypto.h>
--
--void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic);
--int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic);
--struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
--							size_t key_len);
--void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm);
--
--#endif /* AES_GCM_H */
---- a/net/mac80211/aes_gmac.c
-+++ /dev/null
-@@ -1,84 +0,0 @@
--/*
-- * AES-GMAC for IEEE 802.11 BIP-GMAC-128 and BIP-GMAC-256
-- * Copyright 2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/crypto.h>
--#include <linux/err.h>
--#include <crypto/aes.h>
--
--#include <net/mac80211.h>
--#include "key.h"
--#include "aes_gmac.h"
--
--#define GMAC_MIC_LEN 16
--#define GMAC_NONCE_LEN 12
--#define AAD_LEN 20
--
--int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
--		       const u8 *data, size_t data_len, u8 *mic)
--{
--	struct scatterlist sg[3], ct[1];
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *)aead_req_data;
--	u8 zero[GMAC_MIC_LEN], iv[AES_BLOCK_SIZE];
--
--	if (data_len < GMAC_MIC_LEN)
--		return -EINVAL;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	memset(zero, 0, GMAC_MIC_LEN);
--	sg_init_table(sg, 3);
--	sg_set_buf(&sg[0], aad, AAD_LEN);
--	sg_set_buf(&sg[1], data, data_len - GMAC_MIC_LEN);
--	sg_set_buf(&sg[2], zero, GMAC_MIC_LEN);
--
--	memcpy(iv, nonce, GMAC_NONCE_LEN);
--	memset(iv + GMAC_NONCE_LEN, 0, sizeof(iv) - GMAC_NONCE_LEN);
--	iv[AES_BLOCK_SIZE - 1] = 0x01;
--
--	sg_init_table(ct, 1);
--	sg_set_buf(&ct[0], mic, GMAC_MIC_LEN);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, sg, AAD_LEN + data_len);
--	aead_request_set_crypt(aead_req, NULL, ct, 0, iv);
--
--	crypto_aead_encrypt(aead_req);
--
--	return 0;
--}
--
--struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
--						 size_t key_len)
--{
--	struct crypto_aead *tfm;
--	int err;
--
--	tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC);
--	if (IS_ERR(tfm))
--		return tfm;
--
--	err = crypto_aead_setkey(tfm, key, key_len);
--	if (!err)
--		return tfm;
--	if (!err)
--		err = crypto_aead_setauthsize(tfm, GMAC_MIC_LEN);
--
--	crypto_free_aead(tfm);
--	return ERR_PTR(err);
--}
--
--void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm)
--{
--	crypto_free_aead(tfm);
--}
---- a/net/mac80211/aes_gmac.h
-+++ /dev/null
-@@ -1,20 +0,0 @@
--/*
-- * Copyright 2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef AES_GMAC_H
--#define AES_GMAC_H
--
--#include <linux/crypto.h>
--
--struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
--						 size_t key_len);
--int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
--		       const u8 *data, size_t data_len, u8 *mic);
--void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm);
--
--#endif /* AES_GMAC_H */
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -162,13 +162,8 @@ static int ieee80211_add_key(struct wiph
- 			return -EINVAL;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
- 	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
- 		break;
- 	default:
- 		cs = ieee80211_cs_get(local, params->cipher, sdata->vif.type);
-@@ -353,7 +348,6 @@ static int ieee80211_get_key(struct wiph
- 		params.seq_len = 6;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn64 = atomic64_read(&key->u.ccmp.tx_pn);
- 		seq[0] = pn64;
- 		seq[1] = pn64 >> 8;
-@@ -365,35 +359,10 @@ static int ieee80211_get_key(struct wiph
- 		params.seq_len = 6;
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn64 = atomic64_read(&key->u.aes_cmac.tx_pn);
- 		seq[0] = pn64;
- 		seq[1] = pn64 >> 8;
- 		seq[2] = pn64 >> 16;
--		seq[3] = pn64 >> 24;
--		seq[4] = pn64 >> 32;
--		seq[5] = pn64 >> 40;
--		params.seq = seq;
--		params.seq_len = 6;
--		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn64 = atomic64_read(&key->u.aes_gmac.tx_pn);
--		seq[0] = pn64;
--		seq[1] = pn64 >> 8;
--		seq[2] = pn64 >> 16;
--		seq[3] = pn64 >> 24;
--		seq[4] = pn64 >> 32;
--		seq[5] = pn64 >> 40;
--		params.seq = seq;
--		params.seq_len = 6;
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn64 = atomic64_read(&key->u.gcmp.tx_pn);
--		seq[0] = pn64;
--		seq[1] = pn64 >> 8;
--		seq[2] = pn64 >> 16;
- 		seq[3] = pn64 >> 24;
- 		seq[4] = pn64 >> 32;
- 		seq[5] = pn64 >> 40;
---- a/net/mac80211/debugfs_key.c
-+++ b/net/mac80211/debugfs_key.c
-@@ -94,33 +94,17 @@ static ssize_t key_tx_spec_read(struct f
- 				key->u.tkip.tx.iv16);
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn = atomic64_read(&key->u.ccmp.tx_pn);
- 		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
- 				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
- 				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn = atomic64_read(&key->u.aes_cmac.tx_pn);
- 		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
- 				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
- 				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn = atomic64_read(&key->u.aes_gmac.tx_pn);
--		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
--				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
--				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn = atomic64_read(&key->u.gcmp.tx_pn);
--		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
--				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
--				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
--		break;
- 	default:
- 		return 0;
- 	}
-@@ -150,7 +134,6 @@ static ssize_t key_rx_spec_read(struct f
- 		len = p - buf;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) {
- 			rpn = key->u.ccmp.rx_pn[i];
- 			p += scnprintf(p, sizeof(buf)+buf-p,
-@@ -161,7 +144,6 @@ static ssize_t key_rx_spec_read(struct f
- 		len = p - buf;
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		rpn = key->u.aes_cmac.rx_pn;
- 		p += scnprintf(p, sizeof(buf)+buf-p,
- 			       "%02x%02x%02x%02x%02x%02x\n",
-@@ -169,26 +151,6 @@ static ssize_t key_rx_spec_read(struct f
- 			       rpn[3], rpn[4], rpn[5]);
- 		len = p - buf;
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		rpn = key->u.aes_gmac.rx_pn;
--		p += scnprintf(p, sizeof(buf)+buf-p,
--			       "%02x%02x%02x%02x%02x%02x\n",
--			       rpn[0], rpn[1], rpn[2],
--			       rpn[3], rpn[4], rpn[5]);
--		len = p - buf;
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) {
--			rpn = key->u.gcmp.rx_pn[i];
--			p += scnprintf(p, sizeof(buf)+buf-p,
--				       "%02x%02x%02x%02x%02x%02x\n",
--				       rpn[0], rpn[1], rpn[2],
--				       rpn[3], rpn[4], rpn[5]);
--		}
--		len = p - buf;
--		break;
- 	default:
- 		return 0;
- 	}
-@@ -205,23 +167,12 @@ static ssize_t key_replays_read(struct f
- 
- 	switch (key->conf.cipher) {
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		len = scnprintf(buf, sizeof(buf), "%u\n", key->u.ccmp.replays);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		len = scnprintf(buf, sizeof(buf), "%u\n",
- 				key->u.aes_cmac.replays);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		len = scnprintf(buf, sizeof(buf), "%u\n",
--				key->u.aes_gmac.replays);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		len = scnprintf(buf, sizeof(buf), "%u\n", key->u.gcmp.replays);
--		break;
- 	default:
- 		return 0;
- 	}
-@@ -238,15 +189,9 @@ static ssize_t key_icverrors_read(struct
- 
- 	switch (key->conf.cipher) {
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		len = scnprintf(buf, sizeof(buf), "%u\n",
- 				key->u.aes_cmac.icverrors);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		len = scnprintf(buf, sizeof(buf), "%u\n",
--				key->u.aes_gmac.icverrors);
--		break;
- 	default:
- 		return 0;
- 	}
---- a/net/mac80211/key.c
-+++ b/net/mac80211/key.c
-@@ -24,8 +24,6 @@
- #include "debugfs_key.h"
- #include "aes_ccm.h"
- #include "aes_cmac.h"
--#include "aes_gmac.h"
--#include "aes_gcm.h"
- 
- 
- /**
-@@ -164,13 +162,7 @@ static int ieee80211_key_enable_hw_accel
- 	case WLAN_CIPHER_SUITE_WEP104:
- 	case WLAN_CIPHER_SUITE_TKIP:
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
- 		/* all of these we can do in software - if driver can */
- 		if (ret == 1)
- 			return 0;
-@@ -394,26 +386,7 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 		 * Initialize AES key state here as an optimization so that
- 		 * it does not need to be initialized for every packet.
- 		 */
--		key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(
--			key_data, key_len, IEEE80211_CCMP_MIC_LEN);
--		if (IS_ERR(key->u.ccmp.tfm)) {
--			err = PTR_ERR(key->u.ccmp.tfm);
--			kfree(key);
--			return ERR_PTR(err);
--		}
--		break;
--	case WLAN_CIPHER_SUITE_CCMP_256:
--		key->conf.iv_len = IEEE80211_CCMP_256_HDR_LEN;
--		key->conf.icv_len = IEEE80211_CCMP_256_MIC_LEN;
--		for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++)
--			for (j = 0; j < IEEE80211_CCMP_256_PN_LEN; j++)
--				key->u.ccmp.rx_pn[i][j] =
--					seq[IEEE80211_CCMP_256_PN_LEN - j - 1];
--		/* Initialize AES key state here as an optimization so that
--		 * it does not need to be initialized for every packet.
--		 */
--		key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(
--			key_data, key_len, IEEE80211_CCMP_256_MIC_LEN);
-+		key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(key_data);
- 		if (IS_ERR(key->u.ccmp.tfm)) {
- 			err = PTR_ERR(key->u.ccmp.tfm);
- 			kfree(key);
-@@ -421,12 +394,8 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 		}
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		key->conf.iv_len = 0;
--		if (cipher == WLAN_CIPHER_SUITE_AES_CMAC)
--			key->conf.icv_len = sizeof(struct ieee80211_mmie);
--		else
--			key->conf.icv_len = sizeof(struct ieee80211_mmie_16);
-+		key->conf.icv_len = sizeof(struct ieee80211_mmie);
- 		if (seq)
- 			for (j = 0; j < IEEE80211_CMAC_PN_LEN; j++)
- 				key->u.aes_cmac.rx_pn[j] =
-@@ -436,51 +405,13 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 		 * it does not need to be initialized for every packet.
- 		 */
- 		key->u.aes_cmac.tfm =
--			ieee80211_aes_cmac_key_setup(key_data, key_len);
-+			ieee80211_aes_cmac_key_setup(key_data);
- 		if (IS_ERR(key->u.aes_cmac.tfm)) {
- 			err = PTR_ERR(key->u.aes_cmac.tfm);
- 			kfree(key);
- 			return ERR_PTR(err);
- 		}
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		key->conf.iv_len = 0;
--		key->conf.icv_len = sizeof(struct ieee80211_mmie_16);
--		if (seq)
--			for (j = 0; j < IEEE80211_GMAC_PN_LEN; j++)
--				key->u.aes_gmac.rx_pn[j] =
--					seq[IEEE80211_GMAC_PN_LEN - j - 1];
--		/* Initialize AES key state here as an optimization so that
--		 * it does not need to be initialized for every packet.
--		 */
--		key->u.aes_gmac.tfm =
--			ieee80211_aes_gmac_key_setup(key_data, key_len);
--		if (IS_ERR(key->u.aes_gmac.tfm)) {
--			err = PTR_ERR(key->u.aes_gmac.tfm);
--			kfree(key);
--			return ERR_PTR(err);
--		}
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		key->conf.iv_len = IEEE80211_GCMP_HDR_LEN;
--		key->conf.icv_len = IEEE80211_GCMP_MIC_LEN;
--		for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++)
--			for (j = 0; j < IEEE80211_GCMP_PN_LEN; j++)
--				key->u.gcmp.rx_pn[i][j] =
--					seq[IEEE80211_GCMP_PN_LEN - j - 1];
--		/* Initialize AES key state here as an optimization so that
--		 * it does not need to be initialized for every packet.
--		 */
--		key->u.gcmp.tfm = ieee80211_aes_gcm_key_setup_encrypt(key_data,
--								      key_len);
--		if (IS_ERR(key->u.gcmp.tfm)) {
--			err = PTR_ERR(key->u.gcmp.tfm);
--			kfree(key);
--			return ERR_PTR(err);
--		}
--		break;
- 	default:
- 		if (cs) {
- 			size_t len = (seq_len > MAX_PN_LEN) ?
-@@ -502,24 +433,10 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 
- static void ieee80211_key_free_common(struct ieee80211_key *key)
- {
--	switch (key->conf.cipher) {
--	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
-+	if (key->conf.cipher == WLAN_CIPHER_SUITE_CCMP)
- 		ieee80211_aes_key_free(key->u.ccmp.tfm);
--		break;
--	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-+	if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
- 		ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
--		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		ieee80211_aes_gmac_key_free(key->u.aes_gmac.tfm);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		ieee80211_aes_gcm_key_free(key->u.gcmp.tfm);
--		break;
--	}
- 	kzfree(key);
- }
- 
-@@ -826,7 +743,6 @@ void ieee80211_get_key_tx_seq(struct iee
- 		seq->tkip.iv16 = key->u.tkip.tx.iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn64 = atomic64_read(&key->u.ccmp.tx_pn);
- 		seq->ccmp.pn[5] = pn64;
- 		seq->ccmp.pn[4] = pn64 >> 8;
-@@ -836,7 +752,6 @@ void ieee80211_get_key_tx_seq(struct iee
- 		seq->ccmp.pn[0] = pn64 >> 40;
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn64 = atomic64_read(&key->u.aes_cmac.tx_pn);
- 		seq->ccmp.pn[5] = pn64;
- 		seq->ccmp.pn[4] = pn64 >> 8;
-@@ -845,26 +760,6 @@ void ieee80211_get_key_tx_seq(struct iee
- 		seq->ccmp.pn[1] = pn64 >> 32;
- 		seq->ccmp.pn[0] = pn64 >> 40;
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn64 = atomic64_read(&key->u.aes_gmac.tx_pn);
--		seq->ccmp.pn[5] = pn64;
--		seq->ccmp.pn[4] = pn64 >> 8;
--		seq->ccmp.pn[3] = pn64 >> 16;
--		seq->ccmp.pn[2] = pn64 >> 24;
--		seq->ccmp.pn[1] = pn64 >> 32;
--		seq->ccmp.pn[0] = pn64 >> 40;
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn64 = atomic64_read(&key->u.gcmp.tx_pn);
--		seq->gcmp.pn[5] = pn64;
--		seq->gcmp.pn[4] = pn64 >> 8;
--		seq->gcmp.pn[3] = pn64 >> 16;
--		seq->gcmp.pn[2] = pn64 >> 24;
--		seq->gcmp.pn[1] = pn64 >> 32;
--		seq->gcmp.pn[0] = pn64 >> 40;
--		break;
- 	default:
- 		WARN_ON(1);
- 	}
-@@ -887,7 +782,6 @@ void ieee80211_get_key_rx_seq(struct iee
- 		seq->tkip.iv16 = key->u.tkip.rx[tid].iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
- 			return;
- 		if (tid < 0)
-@@ -897,29 +791,11 @@ void ieee80211_get_key_rx_seq(struct iee
- 		memcpy(seq->ccmp.pn, pn, IEEE80211_CCMP_PN_LEN);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		if (WARN_ON(tid != 0))
- 			return;
- 		pn = key->u.aes_cmac.rx_pn;
- 		memcpy(seq->aes_cmac.pn, pn, IEEE80211_CMAC_PN_LEN);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		if (WARN_ON(tid != 0))
--			return;
--		pn = key->u.aes_gmac.rx_pn;
--		memcpy(seq->aes_gmac.pn, pn, IEEE80211_GMAC_PN_LEN);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
--			return;
--		if (tid < 0)
--			pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS];
--		else
--			pn = key->u.gcmp.rx_pn[tid];
--		memcpy(seq->gcmp.pn, pn, IEEE80211_GCMP_PN_LEN);
--		break;
- 	}
- }
- EXPORT_SYMBOL(ieee80211_get_key_rx_seq);
-@@ -938,7 +814,6 @@ void ieee80211_set_key_tx_seq(struct iee
- 		key->u.tkip.tx.iv16 = seq->tkip.iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn64 = (u64)seq->ccmp.pn[5] |
- 		       ((u64)seq->ccmp.pn[4] << 8) |
- 		       ((u64)seq->ccmp.pn[3] << 16) |
-@@ -948,7 +823,6 @@ void ieee80211_set_key_tx_seq(struct iee
- 		atomic64_set(&key->u.ccmp.tx_pn, pn64);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn64 = (u64)seq->aes_cmac.pn[5] |
- 		       ((u64)seq->aes_cmac.pn[4] << 8) |
- 		       ((u64)seq->aes_cmac.pn[3] << 16) |
-@@ -957,26 +831,6 @@ void ieee80211_set_key_tx_seq(struct iee
- 		       ((u64)seq->aes_cmac.pn[0] << 40);
- 		atomic64_set(&key->u.aes_cmac.tx_pn, pn64);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn64 = (u64)seq->aes_gmac.pn[5] |
--		       ((u64)seq->aes_gmac.pn[4] << 8) |
--		       ((u64)seq->aes_gmac.pn[3] << 16) |
--		       ((u64)seq->aes_gmac.pn[2] << 24) |
--		       ((u64)seq->aes_gmac.pn[1] << 32) |
--		       ((u64)seq->aes_gmac.pn[0] << 40);
--		atomic64_set(&key->u.aes_gmac.tx_pn, pn64);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn64 = (u64)seq->gcmp.pn[5] |
--		       ((u64)seq->gcmp.pn[4] << 8) |
--		       ((u64)seq->gcmp.pn[3] << 16) |
--		       ((u64)seq->gcmp.pn[2] << 24) |
--		       ((u64)seq->gcmp.pn[1] << 32) |
--		       ((u64)seq->gcmp.pn[0] << 40);
--		atomic64_set(&key->u.gcmp.tx_pn, pn64);
--		break;
- 	default:
- 		WARN_ON(1);
- 		break;
-@@ -1000,7 +854,6 @@ void ieee80211_set_key_rx_seq(struct iee
- 		key->u.tkip.rx[tid].iv16 = seq->tkip.iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
- 			return;
- 		if (tid < 0)
-@@ -1010,29 +863,11 @@ void ieee80211_set_key_rx_seq(struct iee
- 		memcpy(pn, seq->ccmp.pn, IEEE80211_CCMP_PN_LEN);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		if (WARN_ON(tid != 0))
- 			return;
- 		pn = key->u.aes_cmac.rx_pn;
- 		memcpy(pn, seq->aes_cmac.pn, IEEE80211_CMAC_PN_LEN);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		if (WARN_ON(tid != 0))
--			return;
--		pn = key->u.aes_gmac.rx_pn;
--		memcpy(pn, seq->aes_gmac.pn, IEEE80211_GMAC_PN_LEN);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
--			return;
--		if (tid < 0)
--			pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS];
--		else
--			pn = key->u.gcmp.rx_pn[tid];
--		memcpy(pn, seq->gcmp.pn, IEEE80211_GCMP_PN_LEN);
--		break;
- 	default:
- 		WARN_ON(1);
- 		break;
---- a/net/mac80211/key.h
-+++ b/net/mac80211/key.h
-@@ -84,7 +84,7 @@ struct ieee80211_key {
- 			 * Management frames.
- 			 */
- 			u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
--			struct crypto_aead *tfm;
-+			struct crypto_cipher *tfm;
- 			u32 replays; /* dot11RSNAStatsCCMPReplays */
- 		} ccmp;
- 		struct {
-@@ -95,24 +95,6 @@ struct ieee80211_key {
- 			u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
- 		} aes_cmac;
- 		struct {
--			atomic64_t tx_pn;
--			u8 rx_pn[IEEE80211_GMAC_PN_LEN];
--			struct crypto_aead *tfm;
--			u32 replays; /* dot11RSNAStatsCMACReplays */
--			u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
--		} aes_gmac;
--		struct {
--			atomic64_t tx_pn;
--			/* Last received packet number. The first
--			 * IEEE80211_NUM_TIDS counters are used with Data
--			 * frames and the last counter is used with Robust
--			 * Management frames.
--			 */
--			u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_GCMP_PN_LEN];
--			struct crypto_aead *tfm;
--			u32 replays; /* dot11RSNAStatsGCMPReplays */
--		} gcmp;
--		struct {
- 			/* generic cipher scheme */
- 			u8 rx_pn[IEEE80211_NUM_TIDS + 1][MAX_PN_LEN];
- 		} gen;
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -666,15 +666,9 @@ static int ieee80211_init_cipher_suites(
- 		WLAN_CIPHER_SUITE_WEP104,
- 		WLAN_CIPHER_SUITE_TKIP,
- 		WLAN_CIPHER_SUITE_CCMP,
--		WLAN_CIPHER_SUITE_CCMP_256,
--		WLAN_CIPHER_SUITE_GCMP,
--		WLAN_CIPHER_SUITE_GCMP_256,
- 
- 		/* keep last -- depends on hw flags! */
--		WLAN_CIPHER_SUITE_AES_CMAC,
--		WLAN_CIPHER_SUITE_BIP_CMAC_256,
--		WLAN_CIPHER_SUITE_BIP_GMAC_128,
--		WLAN_CIPHER_SUITE_BIP_GMAC_256,
-+		WLAN_CIPHER_SUITE_AES_CMAC
- 	};
- 
- 	if (local->hw.flags & IEEE80211_HW_SW_CRYPTO_CONTROL ||
-@@ -713,7 +707,7 @@ static int ieee80211_init_cipher_suites(
- 		local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
- 
- 		if (!have_mfp)
--			local->hw.wiphy->n_cipher_suites -= 4;
-+			local->hw.wiphy->n_cipher_suites--;
- 
- 		if (!have_wep) {
- 			local->hw.wiphy->cipher_suites += 2;
-@@ -730,42 +724,32 @@ static int ieee80211_init_cipher_suites(
- 		/* Driver specifies cipher schemes only (but not cipher suites
- 		 * including the schemes)
- 		 *
--		 * We start counting ciphers defined by schemes, TKIP, CCMP,
--		 * CCMP-256, GCMP, and GCMP-256
-+		 * We start counting ciphers defined by schemes, TKIP and CCMP
- 		 */
--		n_suites = local->hw.n_cipher_schemes + 5;
-+		n_suites = local->hw.n_cipher_schemes + 2;
- 
- 		/* check if we have WEP40 and WEP104 */
- 		if (have_wep)
- 			n_suites += 2;
- 
--		/* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128,
--		 * BIP-GMAC-256
--		 */
-+		/* check if we have AES_CMAC */
- 		if (have_mfp)
--			n_suites += 4;
-+			n_suites++;
- 
- 		suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL);
- 		if (!suites)
- 			return -ENOMEM;
- 
- 		suites[w++] = WLAN_CIPHER_SUITE_CCMP;
--		suites[w++] = WLAN_CIPHER_SUITE_CCMP_256;
- 		suites[w++] = WLAN_CIPHER_SUITE_TKIP;
--		suites[w++] = WLAN_CIPHER_SUITE_GCMP;
--		suites[w++] = WLAN_CIPHER_SUITE_GCMP_256;
- 
- 		if (have_wep) {
- 			suites[w++] = WLAN_CIPHER_SUITE_WEP40;
- 			suites[w++] = WLAN_CIPHER_SUITE_WEP104;
- 		}
- 
--		if (have_mfp) {
-+		if (have_mfp)
- 			suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
--			suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256;
--			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128;
--			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256;
--		}
- 
- 		for (r = 0; r < local->hw.n_cipher_schemes; r++)
- 			suites[w++] = cs[r].cipher;
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -647,7 +647,6 @@ static int ieee80211_get_mmie_keyidx(str
- {
- 	struct ieee80211_mgmt *hdr = (struct ieee80211_mgmt *) skb->data;
- 	struct ieee80211_mmie *mmie;
--	struct ieee80211_mmie_16 *mmie16;
- 
- 	if (skb->len < 24 + sizeof(*mmie) || !is_multicast_ether_addr(hdr->da))
- 		return -1;
-@@ -657,18 +656,11 @@ static int ieee80211_get_mmie_keyidx(str
- 
- 	mmie = (struct ieee80211_mmie *)
- 		(skb->data + skb->len - sizeof(*mmie));
--	if (mmie->element_id == WLAN_EID_MMIE &&
--	    mmie->length == sizeof(*mmie) - 2)
--		return le16_to_cpu(mmie->key_id);
--
--	mmie16 = (struct ieee80211_mmie_16 *)
--		(skb->data + skb->len - sizeof(*mmie16));
--	if (skb->len >= 24 + sizeof(*mmie16) &&
--	    mmie16->element_id == WLAN_EID_MMIE &&
--	    mmie16->length == sizeof(*mmie16) - 2)
--		return le16_to_cpu(mmie16->key_id);
-+	if (mmie->element_id != WLAN_EID_MMIE ||
-+	    mmie->length != sizeof(*mmie) - 2)
-+		return -1;
- 
--	return -1;
-+	return le16_to_cpu(mmie->key_id);
- }
- 
- static int iwl80211_get_cs_keyid(const struct ieee80211_cipher_scheme *cs,
-@@ -1658,27 +1650,11 @@ ieee80211_rx_h_decrypt(struct ieee80211_
- 		result = ieee80211_crypto_tkip_decrypt(rx);
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--		result = ieee80211_crypto_ccmp_decrypt(
--			rx, IEEE80211_CCMP_MIC_LEN);
--		break;
--	case WLAN_CIPHER_SUITE_CCMP_256:
--		result = ieee80211_crypto_ccmp_decrypt(
--			rx, IEEE80211_CCMP_256_MIC_LEN);
-+		result = ieee80211_crypto_ccmp_decrypt(rx);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
- 		result = ieee80211_crypto_aes_cmac_decrypt(rx);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--		result = ieee80211_crypto_aes_cmac_256_decrypt(rx);
--		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		result = ieee80211_crypto_aes_gmac_decrypt(rx);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		result = ieee80211_crypto_gcmp_decrypt(rx);
--		break;
- 	default:
- 		result = ieee80211_crypto_hw_decrypt(rx);
- 	}
-@@ -1805,9 +1781,7 @@ ieee80211_rx_h_defragment(struct ieee802
- 		/* This is the first fragment of a new frame. */
- 		entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
- 						 rx->seqno_idx, &(rx->skb));
--		if (rx->key &&
--		    (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
--		     rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256) &&
-+		if (rx->key && rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP &&
- 		    ieee80211_has_protected(fc)) {
- 			int queue = rx->security_idx;
- 			/* Store CCMP PN so that we can verify that the next
-@@ -1836,9 +1810,7 @@ ieee80211_rx_h_defragment(struct ieee802
- 		int i;
- 		u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
- 		int queue;
--		if (!rx->key ||
--		    (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP &&
--		     rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256))
-+		if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP)
- 			return RX_DROP_UNUSABLE;
- 		memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
- 		for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -626,9 +626,6 @@ ieee80211_tx_h_select_key(struct ieee802
- 				tx->key = NULL;
- 			break;
- 		case WLAN_CIPHER_SUITE_CCMP:
--		case WLAN_CIPHER_SUITE_CCMP_256:
--		case WLAN_CIPHER_SUITE_GCMP:
--		case WLAN_CIPHER_SUITE_GCMP_256:
- 			if (!ieee80211_is_data_present(hdr->frame_control) &&
- 			    !ieee80211_use_mfp(hdr->frame_control, tx->sta,
- 					       tx->skb))
-@@ -639,9 +636,6 @@ ieee80211_tx_h_select_key(struct ieee802
- 					ieee80211_is_mgmt(hdr->frame_control);
- 			break;
- 		case WLAN_CIPHER_SUITE_AES_CMAC:
--		case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--		case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--		case WLAN_CIPHER_SUITE_BIP_GMAC_256:
- 			if (!ieee80211_is_mgmt(hdr->frame_control))
- 				tx->key = NULL;
- 			break;
-@@ -1017,21 +1011,9 @@ ieee80211_tx_h_encrypt(struct ieee80211_
- 	case WLAN_CIPHER_SUITE_TKIP:
- 		return ieee80211_crypto_tkip_encrypt(tx);
- 	case WLAN_CIPHER_SUITE_CCMP:
--		return ieee80211_crypto_ccmp_encrypt(
--			tx, IEEE80211_CCMP_MIC_LEN);
--	case WLAN_CIPHER_SUITE_CCMP_256:
--		return ieee80211_crypto_ccmp_encrypt(
--			tx, IEEE80211_CCMP_256_MIC_LEN);
-+		return ieee80211_crypto_ccmp_encrypt(tx);
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
- 		return ieee80211_crypto_aes_cmac_encrypt(tx);
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--		return ieee80211_crypto_aes_cmac_256_encrypt(tx);
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		return ieee80211_crypto_aes_gmac_encrypt(tx);
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		return ieee80211_crypto_gcmp_encrypt(tx);
- 	default:
- 		return ieee80211_crypto_hw_encrypt(tx);
- 	}
---- a/net/mac80211/wpa.c
-+++ b/net/mac80211/wpa.c
-@@ -22,8 +22,6 @@
- #include "tkip.h"
- #include "aes_ccm.h"
- #include "aes_cmac.h"
--#include "aes_gmac.h"
--#include "aes_gcm.h"
- #include "wpa.h"
- 
- ieee80211_tx_result
-@@ -304,15 +302,22 @@ ieee80211_crypto_tkip_decrypt(struct iee
- }
- 
- 
--static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad)
-+static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *scratch,
-+				int encrypted)
- {
- 	__le16 mask_fc;
- 	int a4_included, mgmt;
- 	u8 qos_tid;
--	u16 len_a;
-+	u8 *b_0, *aad;
-+	u16 data_len, len_a;
- 	unsigned int hdrlen;
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- 
-+	memset(scratch, 0, 6 * AES_BLOCK_SIZE);
-+
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+	aad = scratch + 4 * AES_BLOCK_SIZE;
-+
- 	/*
- 	 * Mask FC: zero subtype b4 b5 b6 (if not mgmt)
- 	 * Retry, PwrMgt, MoreData; set Protected
-@@ -334,21 +339,20 @@ static void ccmp_special_blocks(struct s
- 	else
- 		qos_tid = 0;
- 
--	/* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC
--	 * mode authentication are not allowed to collide, yet both are derived
--	 * from this vector b_0. We only set L := 1 here to indicate that the
--	 * data size can be represented in (L+1) bytes. The CCM layer will take
--	 * care of storing the data length in the top (L+1) bytes and setting
--	 * and clearing the other bits as is required to derive the two IVs.
--	 */
--	b_0[0] = 0x1;
-+	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN;
-+	if (encrypted)
-+		data_len -= IEEE80211_CCMP_MIC_LEN;
- 
-+	/* First block, b_0 */
-+	b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */
- 	/* Nonce: Nonce Flags | A2 | PN
- 	 * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
- 	 */
- 	b_0[1] = qos_tid | (mgmt << 4);
- 	memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
- 	memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
-+	/* l(m) */
-+	put_unaligned_be16(data_len, &b_0[14]);
- 
- 	/* AAD (extra authenticate-only data) / masked 802.11 header
- 	 * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -395,8 +399,7 @@ static inline void ccmp_hdr2pn(u8 *pn, u
- }
- 
- 
--static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb,
--			    unsigned int mic_len)
-+static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
- {
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- 	struct ieee80211_key *key = tx->key;
-@@ -405,8 +408,7 @@ static int ccmp_encrypt_skb(struct ieee8
- 	u8 *pos;
- 	u8 pn[6];
- 	u64 pn64;
--	u8 aad[2 * AES_BLOCK_SIZE];
--	u8 b_0[AES_BLOCK_SIZE];
-+	u8 scratch[6 * AES_BLOCK_SIZE];
- 
- 	if (info->control.hw_key &&
- 	    !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) &&
-@@ -427,7 +429,7 @@ static int ccmp_encrypt_skb(struct ieee8
- 	if (info->control.hw_key)
- 		tail = 0;
- 	else
--		tail = mic_len;
-+		tail = IEEE80211_CCMP_MIC_LEN;
- 
- 	if (WARN_ON(skb_tailroom(skb) < tail ||
- 		    skb_headroom(skb) < IEEE80211_CCMP_HDR_LEN))
-@@ -460,24 +462,23 @@ static int ccmp_encrypt_skb(struct ieee8
- 		return 0;
- 
- 	pos += IEEE80211_CCMP_HDR_LEN;
--	ccmp_special_blocks(skb, pn, b_0, aad);
--	ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len,
--				  skb_put(skb, mic_len), mic_len);
-+	ccmp_special_blocks(skb, pn, scratch, 0);
-+	ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, scratch, pos, len,
-+				  pos, skb_put(skb, IEEE80211_CCMP_MIC_LEN));
- 
- 	return 0;
- }
- 
- 
- ieee80211_tx_result
--ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx,
--			      unsigned int mic_len)
-+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx)
- {
- 	struct sk_buff *skb;
- 
- 	ieee80211_tx_set_protected(tx);
- 
- 	skb_queue_walk(&tx->skbs, skb) {
--		if (ccmp_encrypt_skb(tx, skb, mic_len) < 0)
-+		if (ccmp_encrypt_skb(tx, skb) < 0)
- 			return TX_DROP;
- 	}
- 
-@@ -486,8 +487,7 @@ ieee80211_crypto_ccmp_encrypt(struct iee
- 
- 
- ieee80211_rx_result
--ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx,
--			      unsigned int mic_len)
-+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx)
- {
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
- 	int hdrlen;
-@@ -504,7 +504,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- 	    !ieee80211_is_robust_mgmt_frame(skb))
- 		return RX_CONTINUE;
- 
--	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len;
-+	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN -
-+		   IEEE80211_CCMP_MIC_LEN;
- 	if (!rx->sta || data_len < 0)
- 		return RX_DROP_UNUSABLE;
- 
-@@ -526,23 +527,23 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- 	}
- 
- 	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		u8 aad[2 * AES_BLOCK_SIZE];
--		u8 b_0[AES_BLOCK_SIZE];
-+		u8 scratch[6 * AES_BLOCK_SIZE];
- 		/* hardware didn't decrypt/verify MIC */
--		ccmp_special_blocks(skb, pn, b_0, aad);
-+		ccmp_special_blocks(skb, pn, scratch, 1);
- 
- 		if (ieee80211_aes_ccm_decrypt(
--			    key->u.ccmp.tfm, b_0, aad,
-+			    key->u.ccmp.tfm, scratch,
- 			    skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN,
- 			    data_len,
--			    skb->data + skb->len - mic_len, mic_len))
-+			    skb->data + skb->len - IEEE80211_CCMP_MIC_LEN,
-+			    skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN))
- 			return RX_DROP_UNUSABLE;
- 	}
- 
- 	memcpy(key->u.ccmp.rx_pn[queue], pn, IEEE80211_CCMP_PN_LEN);
- 
- 	/* Remove CCMP header and MIC */
--	if (pskb_trim(skb, skb->len - mic_len))
-+	if (pskb_trim(skb, skb->len - IEEE80211_CCMP_MIC_LEN))
- 		return RX_DROP_UNUSABLE;
- 	memmove(skb->data + IEEE80211_CCMP_HDR_LEN, skb->data, hdrlen);
- 	skb_pull(skb, IEEE80211_CCMP_HDR_LEN);
-@@ -550,229 +551,6 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- 	return RX_CONTINUE;
- }
- 
--static void gcmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *j_0, u8 *aad)
--{
--	__le16 mask_fc;
--	u8 qos_tid;
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
--	memcpy(j_0, hdr->addr2, ETH_ALEN);
--	memcpy(&j_0[ETH_ALEN], pn, IEEE80211_GCMP_PN_LEN);
--	j_0[13] = 0;
--	j_0[14] = 0;
--	j_0[AES_BLOCK_SIZE - 1] = 0x01;
--
--	/* AAD (extra authenticate-only data) / masked 802.11 header
--	 * FC | A1 | A2 | A3 | SC | [A4] | [QC]
--	 */
--	put_unaligned_be16(ieee80211_hdrlen(hdr->frame_control) - 2, &aad[0]);
--	/* Mask FC: zero subtype b4 b5 b6 (if not mgmt)
--	 * Retry, PwrMgt, MoreData; set Protected
--	 */
--	mask_fc = hdr->frame_control;
--	mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY |
--				IEEE80211_FCTL_PM | IEEE80211_FCTL_MOREDATA);
--	if (!ieee80211_is_mgmt(hdr->frame_control))
--		mask_fc &= ~cpu_to_le16(0x0070);
--	mask_fc |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
--
--	put_unaligned(mask_fc, (__le16 *)&aad[2]);
--	memcpy(&aad[4], &hdr->addr1, 3 * ETH_ALEN);
--
--	/* Mask Seq#, leave Frag# */
--	aad[22] = *((u8 *)&hdr->seq_ctrl) & 0x0f;
--	aad[23] = 0;
--
--	if (ieee80211_is_data_qos(hdr->frame_control))
--		qos_tid = *ieee80211_get_qos_ctl(hdr) &
--			IEEE80211_QOS_CTL_TID_MASK;
--	else
--		qos_tid = 0;
--
--	if (ieee80211_has_a4(hdr->frame_control)) {
--		memcpy(&aad[24], hdr->addr4, ETH_ALEN);
--		aad[30] = qos_tid;
--		aad[31] = 0;
--	} else {
--		memset(&aad[24], 0, ETH_ALEN + IEEE80211_QOS_CTL_LEN);
--		aad[24] = qos_tid;
--	}
--}
--
--static inline void gcmp_pn2hdr(u8 *hdr, const u8 *pn, int key_id)
--{
--	hdr[0] = pn[5];
--	hdr[1] = pn[4];
--	hdr[2] = 0;
--	hdr[3] = 0x20 | (key_id << 6);
--	hdr[4] = pn[3];
--	hdr[5] = pn[2];
--	hdr[6] = pn[1];
--	hdr[7] = pn[0];
--}
--
--static inline void gcmp_hdr2pn(u8 *pn, const u8 *hdr)
--{
--	pn[0] = hdr[7];
--	pn[1] = hdr[6];
--	pn[2] = hdr[5];
--	pn[3] = hdr[4];
--	pn[4] = hdr[1];
--	pn[5] = hdr[0];
--}
--
--static int gcmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
--{
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--	struct ieee80211_key *key = tx->key;
--	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
--	int hdrlen, len, tail;
--	u8 *pos;
--	u8 pn[6];
--	u64 pn64;
--	u8 aad[2 * AES_BLOCK_SIZE];
--	u8 j_0[AES_BLOCK_SIZE];
--
--	if (info->control.hw_key &&
--	    !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) &&
--	    !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) &&
--	    !((info->control.hw_key->flags &
--	       IEEE80211_KEY_FLAG_GENERATE_IV_MGMT) &&
--	      ieee80211_is_mgmt(hdr->frame_control))) {
--		/* hwaccel has no need for preallocated room for GCMP
--		 * header or MIC fields
--		 */
--		return 0;
--	}
--
--	hdrlen = ieee80211_hdrlen(hdr->frame_control);
--	len = skb->len - hdrlen;
--
--	if (info->control.hw_key)
--		tail = 0;
--	else
--		tail = IEEE80211_GCMP_MIC_LEN;
--
--	if (WARN_ON(skb_tailroom(skb) < tail ||
--		    skb_headroom(skb) < IEEE80211_GCMP_HDR_LEN))
--		return -1;
--
--	pos = skb_push(skb, IEEE80211_GCMP_HDR_LEN);
--	memmove(pos, pos + IEEE80211_GCMP_HDR_LEN, hdrlen);
--	skb_set_network_header(skb, skb_network_offset(skb) +
--				    IEEE80211_GCMP_HDR_LEN);
--
--	/* the HW only needs room for the IV, but not the actual IV */
--	if (info->control.hw_key &&
--	    (info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE))
--		return 0;
--
--	hdr = (struct ieee80211_hdr *)pos;
--	pos += hdrlen;
--
--	pn64 = atomic64_inc_return(&key->u.gcmp.tx_pn);
--
--	pn[5] = pn64;
--	pn[4] = pn64 >> 8;
--	pn[3] = pn64 >> 16;
--	pn[2] = pn64 >> 24;
--	pn[1] = pn64 >> 32;
--	pn[0] = pn64 >> 40;
--
--	gcmp_pn2hdr(pos, pn, key->conf.keyidx);
--
--	/* hwaccel - with software GCMP header */
--	if (info->control.hw_key)
--		return 0;
--
--	pos += IEEE80211_GCMP_HDR_LEN;
--	gcmp_special_blocks(skb, pn, j_0, aad);
--	ieee80211_aes_gcm_encrypt(key->u.gcmp.tfm, j_0, aad, pos, len,
--				  skb_put(skb, IEEE80211_GCMP_MIC_LEN));
--
--	return 0;
--}
--
--ieee80211_tx_result
--ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx)
--{
--	struct sk_buff *skb;
--
--	ieee80211_tx_set_protected(tx);
--
--	skb_queue_walk(&tx->skbs, skb) {
--		if (gcmp_encrypt_skb(tx, skb) < 0)
--			return TX_DROP;
--	}
--
--	return TX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx)
--{
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
--	int hdrlen;
--	struct ieee80211_key *key = rx->key;
--	struct sk_buff *skb = rx->skb;
--	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
--	u8 pn[IEEE80211_GCMP_PN_LEN];
--	int data_len;
--	int queue;
--
--	hdrlen = ieee80211_hdrlen(hdr->frame_control);
--
--	if (!ieee80211_is_data(hdr->frame_control) &&
--	    !ieee80211_is_robust_mgmt_frame(skb))
--		return RX_CONTINUE;
--
--	data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN -
--		   IEEE80211_GCMP_MIC_LEN;
--	if (!rx->sta || data_len < 0)
--		return RX_DROP_UNUSABLE;
--
--	if (status->flag & RX_FLAG_DECRYPTED) {
--		if (!pskb_may_pull(rx->skb, hdrlen + IEEE80211_GCMP_HDR_LEN))
--			return RX_DROP_UNUSABLE;
--	} else {
--		if (skb_linearize(rx->skb))
--			return RX_DROP_UNUSABLE;
--	}
--
--	gcmp_hdr2pn(pn, skb->data + hdrlen);
--
--	queue = rx->security_idx;
--
--	if (memcmp(pn, key->u.gcmp.rx_pn[queue], IEEE80211_GCMP_PN_LEN) <= 0) {
--		key->u.gcmp.replays++;
--		return RX_DROP_UNUSABLE;
--	}
--
--	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		u8 aad[2 * AES_BLOCK_SIZE];
--		u8 j_0[AES_BLOCK_SIZE];
--		/* hardware didn't decrypt/verify MIC */
--		gcmp_special_blocks(skb, pn, j_0, aad);
--
--		if (ieee80211_aes_gcm_decrypt(
--			    key->u.gcmp.tfm, j_0, aad,
--			    skb->data + hdrlen + IEEE80211_GCMP_HDR_LEN,
--			    data_len,
--			    skb->data + skb->len - IEEE80211_GCMP_MIC_LEN))
--			return RX_DROP_UNUSABLE;
--	}
--
--	memcpy(key->u.gcmp.rx_pn[queue], pn, IEEE80211_GCMP_PN_LEN);
--
--	/* Remove GCMP header and MIC */
--	if (pskb_trim(skb, skb->len - IEEE80211_GCMP_MIC_LEN))
--		return RX_DROP_UNUSABLE;
--	memmove(skb->data + IEEE80211_GCMP_HDR_LEN, skb->data, hdrlen);
--	skb_pull(skb, IEEE80211_GCMP_HDR_LEN);
--
--	return RX_CONTINUE;
--}
--
- static ieee80211_tx_result
- ieee80211_crypto_cs_encrypt(struct ieee80211_tx_data *tx,
- 			    struct sk_buff *skb)
-@@ -956,48 +734,6 @@ ieee80211_crypto_aes_cmac_encrypt(struct
- 	return TX_CONTINUE;
- }
- 
--ieee80211_tx_result
--ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx)
--{
--	struct sk_buff *skb;
--	struct ieee80211_tx_info *info;
--	struct ieee80211_key *key = tx->key;
--	struct ieee80211_mmie_16 *mmie;
--	u8 aad[20];
--	u64 pn64;
--
--	if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
--		return TX_DROP;
--
--	skb = skb_peek(&tx->skbs);
--
--	info = IEEE80211_SKB_CB(skb);
--
--	if (info->control.hw_key)
--		return TX_CONTINUE;
--
--	if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie)))
--		return TX_DROP;
--
--	mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie));
--	mmie->element_id = WLAN_EID_MMIE;
--	mmie->length = sizeof(*mmie) - 2;
--	mmie->key_id = cpu_to_le16(key->conf.keyidx);
--
--	/* PN = PN + 1 */
--	pn64 = atomic64_inc_return(&key->u.aes_cmac.tx_pn);
--
--	bip_ipn_set64(mmie->sequence_number, pn64);
--
--	bip_aad(skb, aad);
--
--	/* MIC = AES-256-CMAC(IGTK, AAD || Management Frame Body || MMIE, 128)
--	 */
--	ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad,
--			       skb->data + 24, skb->len - 24, mmie->mic);
--
--	return TX_CONTINUE;
--}
- 
- ieee80211_rx_result
- ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx)
-@@ -1045,160 +781,6 @@ ieee80211_crypto_aes_cmac_decrypt(struct
- 
- 	/* Remove MMIE */
- 	skb_trim(skb, skb->len - sizeof(*mmie));
--
--	return RX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx)
--{
--	struct sk_buff *skb = rx->skb;
--	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
--	struct ieee80211_key *key = rx->key;
--	struct ieee80211_mmie_16 *mmie;
--	u8 aad[20], mic[16], ipn[6];
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
--	if (!ieee80211_is_mgmt(hdr->frame_control))
--		return RX_CONTINUE;
--
--	/* management frames are already linear */
--
--	if (skb->len < 24 + sizeof(*mmie))
--		return RX_DROP_UNUSABLE;
--
--	mmie = (struct ieee80211_mmie_16 *)
--		(skb->data + skb->len - sizeof(*mmie));
--	if (mmie->element_id != WLAN_EID_MMIE ||
--	    mmie->length != sizeof(*mmie) - 2)
--		return RX_DROP_UNUSABLE; /* Invalid MMIE */
--
--	bip_ipn_swap(ipn, mmie->sequence_number);
--
--	if (memcmp(ipn, key->u.aes_cmac.rx_pn, 6) <= 0) {
--		key->u.aes_cmac.replays++;
--		return RX_DROP_UNUSABLE;
--	}
--
--	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		/* hardware didn't decrypt/verify MIC */
--		bip_aad(skb, aad);
--		ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad,
--				       skb->data + 24, skb->len - 24, mic);
--		if (memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) {
--			key->u.aes_cmac.icverrors++;
--			return RX_DROP_UNUSABLE;
--		}
--	}
--
--	memcpy(key->u.aes_cmac.rx_pn, ipn, 6);
--
--	/* Remove MMIE */
--	skb_trim(skb, skb->len - sizeof(*mmie));
--
--	return RX_CONTINUE;
--}
--
--ieee80211_tx_result
--ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx)
--{
--	struct sk_buff *skb;
--	struct ieee80211_tx_info *info;
--	struct ieee80211_key *key = tx->key;
--	struct ieee80211_mmie_16 *mmie;
--	struct ieee80211_hdr *hdr;
--	u8 aad[20];
--	u64 pn64;
--	u8 nonce[12];
--
--	if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
--		return TX_DROP;
--
--	skb = skb_peek(&tx->skbs);
--
--	info = IEEE80211_SKB_CB(skb);
--
--	if (info->control.hw_key)
--		return TX_CONTINUE;
--
--	if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie)))
--		return TX_DROP;
--
--	mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie));
--	mmie->element_id = WLAN_EID_MMIE;
--	mmie->length = sizeof(*mmie) - 2;
--	mmie->key_id = cpu_to_le16(key->conf.keyidx);
--
--	/* PN = PN + 1 */
--	pn64 = atomic64_inc_return(&key->u.aes_gmac.tx_pn);
--
--	bip_ipn_set64(mmie->sequence_number, pn64);
--
--	bip_aad(skb, aad);
--
--	hdr = (struct ieee80211_hdr *)skb->data;
--	memcpy(nonce, hdr->addr2, ETH_ALEN);
--	bip_ipn_swap(nonce + ETH_ALEN, mmie->sequence_number);
--
--	/* MIC = AES-GMAC(IGTK, AAD || Management Frame Body || MMIE, 128) */
--	if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
--			       skb->data + 24, skb->len - 24, mmie->mic) < 0)
--		return TX_DROP;
--
--	return TX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx)
--{
--	struct sk_buff *skb = rx->skb;
--	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
--	struct ieee80211_key *key = rx->key;
--	struct ieee80211_mmie_16 *mmie;
--	u8 aad[20], mic[16], ipn[6], nonce[12];
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
--	if (!ieee80211_is_mgmt(hdr->frame_control))
--		return RX_CONTINUE;
--
--	/* management frames are already linear */
--
--	if (skb->len < 24 + sizeof(*mmie))
--		return RX_DROP_UNUSABLE;
--
--	mmie = (struct ieee80211_mmie_16 *)
--		(skb->data + skb->len - sizeof(*mmie));
--	if (mmie->element_id != WLAN_EID_MMIE ||
--	    mmie->length != sizeof(*mmie) - 2)
--		return RX_DROP_UNUSABLE; /* Invalid MMIE */
--
--	bip_ipn_swap(ipn, mmie->sequence_number);
--
--	if (memcmp(ipn, key->u.aes_gmac.rx_pn, 6) <= 0) {
--		key->u.aes_gmac.replays++;
--		return RX_DROP_UNUSABLE;
--	}
--
--	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		/* hardware didn't decrypt/verify MIC */
--		bip_aad(skb, aad);
--
--		memcpy(nonce, hdr->addr2, ETH_ALEN);
--		memcpy(nonce + ETH_ALEN, ipn, 6);
--
--		if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
--				       skb->data + 24, skb->len - 24,
--				       mic) < 0 ||
--		    memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) {
--			key->u.aes_gmac.icverrors++;
--			return RX_DROP_UNUSABLE;
--		}
--	}
--
--	memcpy(key->u.aes_gmac.rx_pn, ipn, 6);
--
--	/* Remove MMIE */
--	skb_trim(skb, skb->len - sizeof(*mmie));
- 
- 	return RX_CONTINUE;
- }
---- a/net/mac80211/wpa.h
-+++ b/net/mac80211/wpa.h
-@@ -24,32 +24,17 @@ ieee80211_rx_result
- ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx);
- 
- ieee80211_tx_result
--ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx,
--			      unsigned int mic_len);
-+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
--ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx,
--			      unsigned int mic_len);
-+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx);
- 
- ieee80211_tx_result
- ieee80211_crypto_aes_cmac_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_tx_result
--ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
- ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx);
--ieee80211_rx_result
--ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx);
--ieee80211_tx_result
--ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_rx_result
--ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx);
- ieee80211_tx_result
- ieee80211_crypto_hw_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
- ieee80211_crypto_hw_decrypt(struct ieee80211_rx_data *rx);
- 
--ieee80211_tx_result
--ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_rx_result
--ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx);
--
- #endif /* WPA_H */
diff --git a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
index 41a3c4f355..d1d9fbd9b1 100644
--- a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
+++ b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
@@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -856,7 +856,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -846,7 +846,6 @@ static int ieee80211_stop_ap(struct wiph
  	sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
  
  	__sta_info_flush(sdata, true);
diff --git a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
index de79bd2438..2855a88af7 100644
--- a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
+++ b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
@@ -1,6 +1,6 @@
 --- a/net/mac80211/main.c
 +++ b/net/mac80211/main.c
-@@ -287,7 +287,7 @@ void ieee80211_restart_hw(struct ieee802
+@@ -291,7 +291,7 @@ void ieee80211_restart_hw(struct ieee802
  }
  EXPORT_SYMBOL(ieee80211_restart_hw);
  
@@ -9,7 +9,7 @@
  static int ieee80211_ifa_changed(struct notifier_block *nb,
  				 unsigned long data, void *arg)
  {
-@@ -346,7 +346,7 @@ static int ieee80211_ifa_changed(struct
+@@ -350,7 +350,7 @@ static int ieee80211_ifa_changed(struct
  }
  #endif
  
@@ -18,9 +18,9 @@
  static int ieee80211_ifa6_changed(struct notifier_block *nb,
  				  unsigned long data, void *arg)
  {
-@@ -1057,14 +1057,14 @@ int ieee80211_register_hw(struct ieee802
- 	if (result)
- 		goto fail_pm_qos;
+@@ -1087,14 +1087,14 @@ int ieee80211_register_hw(struct ieee802
+ 
+ 	rtnl_unlock();
  
 -#ifdef CONFIG_INET
 +#ifdef __disabled__CONFIG_INET
@@ -35,7 +35,7 @@
  	local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
  	result = register_inet6addr_notifier(&local->ifa6_notifier);
  	if (result)
-@@ -1073,13 +1073,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1103,13 +1103,13 @@ int ieee80211_register_hw(struct ieee802
  
  	return 0;
  
@@ -50,12 +50,12 @@
 -#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
 +#if defined(__disabled__CONFIG_INET) || defined(__disabled__CONFIG_IPV6)
   fail_ifa:
- 	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
- 			       &local->network_latency_notifier);
-@@ -1124,10 +1124,10 @@ void ieee80211_unregister_hw(struct ieee
+ #endif
+ 	rtnl_lock();
+@@ -1137,10 +1137,10 @@ void ieee80211_unregister_hw(struct ieee
+ 	tasklet_kill(&local->tx_pending_tasklet);
+ 	tasklet_kill(&local->tasklet);
  
- 	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
- 			       &local->network_latency_notifier);
 -#ifdef CONFIG_INET
 +#ifdef __disabled__CONFIG_INET
  	unregister_inetaddr_notifier(&local->ifa_notifier);
diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch b/package/kernel/mac80211/patches/210-ap_scan.patch
index 47dcec3ba2..a99cbd2bee 100644
--- a/package/kernel/mac80211/patches/210-ap_scan.patch
+++ b/package/kernel/mac80211/patches/210-ap_scan.patch
@@ -1,6 +1,6 @@
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -1963,7 +1963,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -1999,7 +1999,7 @@ static int ieee80211_scan(struct wiphy *
  		 * the  frames sent while scanning on other channel will be
  		 * lost)
  		 */
diff --git a/package/kernel/mac80211/patches/356-ath9k-force-rx_clear-when-disabling-rx.patch b/package/kernel/mac80211/patches/300-ath9k-force-rx_clear-when-disabling-rx.patch
similarity index 100%
rename from package/kernel/mac80211/patches/356-ath9k-force-rx_clear-when-disabling-rx.patch
rename to package/kernel/mac80211/patches/300-ath9k-force-rx_clear-when-disabling-rx.patch
diff --git a/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch b/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch
deleted file mode 100644
index 237121ba27..0000000000
--- a/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch
+++ /dev/null
@@ -1,882 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Tue, 18 Nov 2014 23:58:51 +0100
-Subject: [PATCH] mac80211: add an intermediate software queue implementation
-
-This allows drivers to request per-vif and per-sta-tid queues from which
-they can pull frames. This makes it easier to keep the hardware queues
-short, and to improve fairness between clients and vifs.
-
-The task of scheduling packet transmission is left up to the driver -
-queueing is controlled by mac80211. Drivers can only dequeue packets by
-calling ieee80211_tx_dequeue. This makes it possible to add active queue
-management later without changing drivers using this code.
-
-This can also be used as a starting point to implement A-MSDU
-aggregation in a way that does not add artificially induced latency.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -84,6 +84,39 @@
-  *
-  */
- 
-+/**
-+ * DOC: mac80211 software tx queueing
-+ *
-+ * mac80211 provides an optional intermediate queueing implementation designed
-+ * to allow the driver to keep hardware queues short and provide some fairness
-+ * between different stations/interfaces.
-+ * In this model, the driver pulls data frames from the mac80211 queue instead
-+ * of letting mac80211 push them via drv_tx().
-+ * Other frames (e.g. control or management) are still pushed using drv_tx().
-+ *
-+ * Drivers indicate that they use this model by implementing the .wake_tx_queue
-+ * driver operation.
-+ *
-+ * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with a
-+ * single per-vif queue for multicast data frames.
-+ *
-+ * The driver is expected to initialize its private per-queue data for stations
-+ * and interfaces in the .add_interface and .sta_add ops.
-+ *
-+ * The driver can't access the queue directly. To dequeue a frame, it calls
-+ * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it
-+ * calls the .wake_tx_queue driver op.
-+ *
-+ * For AP powersave TIM handling, the driver only needs to indicate if it has
-+ * buffered packets in the driver specific data structures by calling
-+ * ieee80211_sta_set_buffered(). For frames buffered in the ieee80211_txq
-+ * struct, mac80211 sets the appropriate TIM PVB bits and calls
-+ * .release_buffered_frames().
-+ * In that callback the driver is therefore expected to release its own
-+ * buffered frames and afterwards also frames from the ieee80211_txq (obtained
-+ * via the usual ieee80211_tx_dequeue).
-+ */
-+
- struct device;
- 
- /**
-@@ -1246,6 +1279,7 @@ enum ieee80211_vif_flags {
-  *	monitor interface (if that is requested.)
-  * @drv_priv: data area for driver use, will always be aligned to
-  *	sizeof(void *).
-+ * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
-  */
- struct ieee80211_vif {
- 	enum nl80211_iftype type;
-@@ -1257,6 +1291,8 @@ struct ieee80211_vif {
- 	u8 cab_queue;
- 	u8 hw_queue[IEEE80211_NUM_ACS];
- 
-+	struct ieee80211_txq *txq;
-+
- 	struct ieee80211_chanctx_conf __rcu *chanctx_conf;
- 
- 	u32 driver_flags;
-@@ -1501,6 +1537,7 @@ struct ieee80211_sta_rates {
-  * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
-  *	valid if the STA is a TDLS peer in the first place.
-  * @mfp: indicates whether the STA uses management frame protection or not.
-+ * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
-  */
- struct ieee80211_sta {
- 	u32 supp_rates[IEEE80211_NUM_BANDS];
-@@ -1519,6 +1556,8 @@ struct ieee80211_sta {
- 	bool tdls_initiator;
- 	bool mfp;
- 
-+	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
-+
- 	/* must be last */
- 	u8 drv_priv[0] __aligned(sizeof(void *));
- };
-@@ -1547,6 +1586,27 @@ struct ieee80211_tx_control {
- };
- 
- /**
-+ * struct ieee80211_txq - Software intermediate tx queue
-+ *
-+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
-+ * @sta: station table entry, %NULL for per-vif queue
-+ * @tid: the TID for this queue (unused for per-vif queue)
-+ * @ac: the AC for this queue
-+ *
-+ * The driver can obtain packets from this queue by calling
-+ * ieee80211_tx_dequeue().
-+ */
-+struct ieee80211_txq {
-+	struct ieee80211_vif *vif;
-+	struct ieee80211_sta *sta;
-+	u8 tid;
-+	u8 ac;
-+
-+	/* must be last */
-+	u8 drv_priv[0] __aligned(sizeof(void *));
-+};
-+
-+/**
-  * enum ieee80211_hw_flags - hardware flags
-  *
-  * These flags are used to indicate hardware capabilities to
-@@ -1770,6 +1830,8 @@ enum ieee80211_hw_flags {
-  *	within &struct ieee80211_sta.
-  * @chanctx_data_size: size (in bytes) of the drv_priv data area
-  *	within &struct ieee80211_chanctx_conf.
-+ * @txq_data_size: size (in bytes) of the drv_priv data area
-+ *	within @struct ieee80211_txq.
-  *
-  * @max_rates: maximum number of alternate rate retry stages the hw
-  *	can handle.
-@@ -1818,6 +1880,9 @@ enum ieee80211_hw_flags {
-  * @n_cipher_schemes: a size of an array of cipher schemes definitions.
-  * @cipher_schemes: a pointer to an array of cipher scheme definitions
-  *	supported by HW.
-+ *
-+ * @txq_ac_max_pending: maximum number of frames per AC pending in all txq
-+ *	entries for a vif.
-  */
- struct ieee80211_hw {
- 	struct ieee80211_conf conf;
-@@ -1830,6 +1895,7 @@ struct ieee80211_hw {
- 	int vif_data_size;
- 	int sta_data_size;
- 	int chanctx_data_size;
-+	int txq_data_size;
- 	u16 queues;
- 	u16 max_listen_interval;
- 	s8 max_signal;
-@@ -1846,6 +1912,7 @@ struct ieee80211_hw {
- 	u8 uapsd_max_sp_len;
- 	u8 n_cipher_schemes;
- 	const struct ieee80211_cipher_scheme *cipher_schemes;
-+	int txq_ac_max_pending;
- };
- 
- /**
-@@ -3007,6 +3074,8 @@ enum ieee80211_reconfig_type {
-  *	response template is provided, together with the location of the
-  *	switch-timing IE within the template. The skb can only be used within
-  *	the function call.
-+ *
-+ * @wake_tx_queue: Called when new packets have been added to the queue.
-  */
- struct ieee80211_ops {
- 	void (*tx)(struct ieee80211_hw *hw,
-@@ -3238,6 +3307,9 @@ struct ieee80211_ops {
- 	void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw,
- 					 struct ieee80211_vif *vif,
- 					 struct ieee80211_tdls_ch_sw_params *params);
-+
-+	void (*wake_tx_queue)(struct ieee80211_hw *hw,
-+			      struct ieee80211_txq *txq);
- };
- 
- /**
-@@ -5249,4 +5321,15 @@ void ieee80211_unreserve_tid(struct ieee
-  */
- size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
- 			  const u8 *ids, int n_ids, size_t offset);
-+
-+/**
-+ * ieee80211_tx_dequeue - dequeue a packet from a software tx queue
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @txq: pointer obtained from station or virtual interface
-+ *
-+ * Returns the skb if successful, %NULL if no frame was available.
-+ */
-+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
-+				     struct ieee80211_txq *txq);
- #endif /* MAC80211_H */
---- a/net/mac80211/driver-ops.h
-+++ b/net/mac80211/driver-ops.h
-@@ -1367,4 +1367,16 @@ drv_tdls_recv_channel_switch(struct ieee
- 	trace_drv_return_void(local);
- }
- 
-+static inline void drv_wake_tx_queue(struct ieee80211_local *local,
-+				     struct txq_info *txq)
-+{
-+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->txq.vif);
-+
-+	if (!check_sdata_in_driver(sdata))
-+		return;
-+
-+	trace_drv_wake_tx_queue(local, sdata, txq);
-+	local->ops->wake_tx_queue(&local->hw, &txq->txq);
-+}
-+
- #endif /* __MAC80211_DRIVER_OPS */
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -809,6 +809,19 @@ struct mac80211_qos_map {
- 	struct rcu_head rcu_head;
- };
- 
-+enum txq_info_flags {
-+	IEEE80211_TXQ_STOP,
-+	IEEE80211_TXQ_AMPDU,
-+};
-+
-+struct txq_info {
-+	struct sk_buff_head queue;
-+	unsigned long flags;
-+
-+	/* keep last! */
-+	struct ieee80211_txq txq;
-+};
-+
- struct ieee80211_sub_if_data {
- 	struct list_head list;
- 
-@@ -853,6 +866,7 @@ struct ieee80211_sub_if_data {
- 	bool control_port_no_encrypt;
- 	int encrypt_headroom;
- 
-+	atomic_t txqs_len[IEEE80211_NUM_ACS];
- 	struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS];
- 	struct mac80211_qos_map __rcu *qos_map;
- 
-@@ -1453,6 +1467,10 @@ static inline struct ieee80211_local *hw
- 	return container_of(hw, struct ieee80211_local, hw);
- }
- 
-+static inline struct txq_info *to_txq_info(struct ieee80211_txq *txq)
-+{
-+	return container_of(txq, struct txq_info, txq);
-+}
- 
- static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
- {
-@@ -1905,6 +1923,9 @@ static inline bool ieee80211_can_run_wor
- 	return true;
- }
- 
-+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata,
-+			     struct sta_info *sta,
-+			     struct txq_info *txq, int tid);
- void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
- 			 u16 transaction, u16 auth_alg, u16 status,
- 			 const u8 *extra, size_t extra_len, const u8 *bssid,
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -969,6 +969,13 @@ static void ieee80211_do_stop(struct iee
- 	}
- 	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- 
-+	if (sdata->vif.txq) {
-+		struct txq_info *txqi = to_txq_info(sdata->vif.txq);
-+
-+		ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
-+		atomic_set(&sdata->txqs_len[txqi->txq.ac], 0);
-+	}
-+
- 	if (local->open_count == 0)
- 		ieee80211_clear_tx_pending(local);
- 
-@@ -1674,6 +1681,7 @@ int ieee80211_if_add(struct ieee80211_lo
- {
- 	struct net_device *ndev = NULL;
- 	struct ieee80211_sub_if_data *sdata = NULL;
-+	struct txq_info *txqi;
- 	int ret, i;
- 	int txqs = 1;
- 
-@@ -1693,10 +1701,18 @@ int ieee80211_if_add(struct ieee80211_lo
- 		ieee80211_assign_perm_addr(local, wdev->address, type);
- 		memcpy(sdata->vif.addr, wdev->address, ETH_ALEN);
- 	} else {
-+		int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size,
-+				 sizeof(void *));
-+		int txq_size = 0;
-+
-+		if (local->ops->wake_tx_queue)
-+			txq_size += sizeof(struct txq_info) +
-+				    local->hw.txq_data_size;
-+
- 		if (local->hw.queues >= IEEE80211_NUM_ACS)
- 			txqs = IEEE80211_NUM_ACS;
- 
--		ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
-+		ndev = alloc_netdev_mqs(size + txq_size,
- 					name, NET_NAME_UNKNOWN,
- 					ieee80211_if_setup, txqs, 1);
- 		if (!ndev)
-@@ -1731,6 +1747,11 @@ int ieee80211_if_add(struct ieee80211_lo
- 		memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
- 		memcpy(sdata->name, ndev->name, IFNAMSIZ);
- 
-+		if (txq_size) {
-+			txqi = netdev_priv(ndev) + size;
-+			ieee80211_init_tx_queue(sdata, NULL, txqi, 0);
-+		}
-+
- 		sdata->dev = ndev;
- 	}
- 
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -1019,6 +1019,9 @@ int ieee80211_register_hw(struct ieee802
- 
- 	local->dynamic_ps_forced_timeout = -1;
- 
-+	if (!local->hw.txq_ac_max_pending)
-+		local->hw.txq_ac_max_pending = 64;
-+
- 	result = ieee80211_wep_init(local);
- 	if (result < 0)
- 		wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -118,6 +118,16 @@ static void __cleanup_single_sta(struct
- 		atomic_dec(&ps->num_sta_ps);
- 	}
- 
-+	if (sta->sta.txq[0]) {
-+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
-+			int n = skb_queue_len(&txqi->queue);
-+
-+			ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
-+			atomic_sub(n, &sdata->txqs_len[txqi->txq.ac]);
-+		}
-+	}
-+
- 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
- 		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
- 		ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]);
-@@ -234,6 +244,8 @@ void sta_info_free(struct ieee80211_loca
- 
- 	sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr);
- 
-+	if (sta->sta.txq[0])
-+		kfree(to_txq_info(sta->sta.txq[0]));
- 	kfree(rcu_dereference_raw(sta->sta.rates));
- 	kfree(sta);
- }
-@@ -285,11 +297,12 @@ struct sta_info *sta_info_alloc(struct i
- 				const u8 *addr, gfp_t gfp)
- {
- 	struct ieee80211_local *local = sdata->local;
-+	struct ieee80211_hw *hw = &local->hw;
- 	struct sta_info *sta;
- 	struct timespec uptime;
- 	int i;
- 
--	sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp);
-+	sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp);
- 	if (!sta)
- 		return NULL;
- 
-@@ -321,11 +334,25 @@ struct sta_info *sta_info_alloc(struct i
- 	for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++)
- 		ewma_init(&sta->chain_signal_avg[i], 1024, 8);
- 
--	if (sta_prepare_rate_control(local, sta, gfp)) {
--		kfree(sta);
--		return NULL;
-+	if (local->ops->wake_tx_queue) {
-+		void *txq_data;
-+		int size = sizeof(struct txq_info) +
-+			   ALIGN(hw->txq_data_size, sizeof(void *));
-+
-+		txq_data = kcalloc(ARRAY_SIZE(sta->sta.txq), size, gfp);
-+		if (!txq_data)
-+			goto free;
-+
-+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+			struct txq_info *txq = txq_data + i * size;
-+
-+			ieee80211_init_tx_queue(sdata, sta, txq, i);
-+		}
- 	}
- 
-+	if (sta_prepare_rate_control(local, sta, gfp))
-+		goto free_txq;
-+
- 	for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
- 		/*
- 		 * timer_to_tid must be initialized with identity mapping
-@@ -346,7 +373,7 @@ struct sta_info *sta_info_alloc(struct i
- 	if (sdata->vif.type == NL80211_IFTYPE_AP ||
- 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
- 		struct ieee80211_supported_band *sband =
--			local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
-+			hw->wiphy->bands[ieee80211_get_sdata_band(sdata)];
- 		u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >>
- 				IEEE80211_HT_CAP_SM_PS_SHIFT;
- 		/*
-@@ -371,6 +398,13 @@ struct sta_info *sta_info_alloc(struct i
- 	sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
- 
- 	return sta;
-+
-+free_txq:
-+	if (sta->sta.txq[0])
-+		kfree(to_txq_info(sta->sta.txq[0]));
-+free:
-+	kfree(sta);
-+	return NULL;
- }
- 
- static int sta_info_insert_check(struct sta_info *sta)
-@@ -640,6 +674,8 @@ static void __sta_info_recalc_tim(struct
- 
- 		indicate_tim |=
- 			sta->driver_buffered_tids & tids;
-+		indicate_tim |=
-+			sta->txq_buffered_tids & tids;
- 	}
- 
-  done:
-@@ -1071,7 +1107,7 @@ void ieee80211_sta_ps_deliver_wakeup(str
- 	struct ieee80211_sub_if_data *sdata = sta->sdata;
- 	struct ieee80211_local *local = sdata->local;
- 	struct sk_buff_head pending;
--	int filtered = 0, buffered = 0, ac;
-+	int filtered = 0, buffered = 0, ac, i;
- 	unsigned long flags;
- 	struct ps_data *ps;
- 
-@@ -1090,10 +1126,22 @@ void ieee80211_sta_ps_deliver_wakeup(str
- 
- 	BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1);
- 	sta->driver_buffered_tids = 0;
-+	sta->txq_buffered_tids = 0;
- 
- 	if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS))
- 		drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta);
- 
-+	if (sta->sta.txq[0]) {
-+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
-+
-+			if (!skb_queue_len(&txqi->queue))
-+				continue;
-+
-+			drv_wake_tx_queue(local, txqi);
-+		}
-+	}
-+
- 	skb_queue_head_init(&pending);
- 
- 	/* sync with ieee80211_tx_h_unicast_ps_buf */
-@@ -1275,8 +1323,10 @@ ieee80211_sta_ps_deliver_response(struct
- 		/* if we already have frames from software, then we can't also
- 		 * release from hardware queues
- 		 */
--		if (skb_queue_empty(&frames))
-+		if (skb_queue_empty(&frames)) {
- 			driver_release_tids |= sta->driver_buffered_tids & tids;
-+			driver_release_tids |= sta->txq_buffered_tids & tids;
-+		}
- 
- 		if (driver_release_tids) {
- 			/* If the driver has data on more than one TID then
-@@ -1447,6 +1497,9 @@ ieee80211_sta_ps_deliver_response(struct
- 
- 		sta_info_recalc_tim(sta);
- 	} else {
-+		unsigned long tids = sta->txq_buffered_tids & driver_release_tids;
-+		int tid;
-+
- 		/*
- 		 * We need to release a frame that is buffered somewhere in the
- 		 * driver ... it'll have to handle that.
-@@ -1466,8 +1519,22 @@ ieee80211_sta_ps_deliver_response(struct
- 		 * that the TID(s) became empty before returning here from the
- 		 * release function.
- 		 * Either way, however, when the driver tells us that the TID(s)
--		 * became empty we'll do the TIM recalculation.
-+		 * became empty or we find that a txq became empty, we'll do the
-+		 * TIM recalculation.
- 		 */
-+
-+		if (!sta->sta.txq[0])
-+			return;
-+
-+		for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
-+			struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
-+
-+			if (!(tids & BIT(tid)) || skb_queue_len(&txqi->queue))
-+				continue;
-+
-+			sta_info_recalc_tim(sta);
-+			break;
-+		}
- 	}
- }
- 
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -274,6 +274,7 @@ struct sta_ampdu_mlme {
-  *	entered power saving state, these are also delivered to
-  *	the station when it leaves powersave or polls for frames
-  * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on
-+ * @txq_buffered_tids: bitmap of TIDs that mac80211 has txq data buffered on
-  * @rx_packets: Number of MSDUs received from this STA
-  * @rx_bytes: Number of bytes received from this STA
-  * @last_rx: time (in jiffies) when last frame was received from this STA
-@@ -368,6 +369,7 @@ struct sta_info {
- 	struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
- 	struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
- 	unsigned long driver_buffered_tids;
-+	unsigned long txq_buffered_tids;
- 
- 	/* Updated from RX path only, no locking requirements */
- 	unsigned long rx_packets;
---- a/net/mac80211/trace.h
-+++ b/net/mac80211/trace.h
-@@ -2312,6 +2312,37 @@ TRACE_EVENT(drv_tdls_recv_channel_switch
- 	)
- );
- 
-+TRACE_EVENT(drv_wake_tx_queue,
-+	TP_PROTO(struct ieee80211_local *local,
-+		 struct ieee80211_sub_if_data *sdata,
-+		 struct txq_info *txq),
-+
-+	TP_ARGS(local, sdata, txq),
-+
-+	TP_STRUCT__entry(
-+		LOCAL_ENTRY
-+		VIF_ENTRY
-+		STA_ENTRY
-+		__field(u8, ac)
-+		__field(u8, tid)
-+	),
-+
-+	TP_fast_assign(
-+		struct ieee80211_sta *sta = txq->txq.sta;
-+
-+		LOCAL_ASSIGN;
-+		VIF_ASSIGN;
-+		STA_ASSIGN;
-+		__entry->ac = txq->txq.ac;
-+		__entry->tid = txq->txq.tid;
-+	),
-+
-+	TP_printk(
-+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " ac:%d tid:%d",
-+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->ac, __entry->tid
-+	)
-+);
-+
- #ifdef CPTCFG_MAC80211_MESSAGE_TRACING
- #undef TRACE_SYSTEM
- #define TRACE_SYSTEM mac80211_msg
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -776,12 +776,22 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
- 	return TX_CONTINUE;
- }
- 
-+static __le16 ieee80211_tx_next_seq(struct sta_info *sta, int tid)
-+{
-+	u16 *seq = &sta->tid_seq[tid];
-+	__le16 ret = cpu_to_le16(*seq);
-+
-+	/* Increase the sequence number. */
-+	*seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
-+
-+	return ret;
-+}
-+
- static ieee80211_tx_result debug_noinline
- ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
- {
- 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
--	u16 *seq;
- 	u8 *qc;
- 	int tid;
- 
-@@ -832,13 +842,10 @@ ieee80211_tx_h_sequence(struct ieee80211
- 
- 	qc = ieee80211_get_qos_ctl(hdr);
- 	tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
--	seq = &tx->sta->tid_seq[tid];
- 	tx->sta->tx_msdu[tid]++;
- 
--	hdr->seq_ctrl = cpu_to_le16(*seq);
--
--	/* Increase the sequence number. */
--	*seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
-+	if (!tx->sta->sta.txq[0])
-+		hdr->seq_ctrl = ieee80211_tx_next_seq(tx->sta, tid);
- 
- 	return TX_CONTINUE;
- }
-@@ -1067,7 +1074,7 @@ static bool ieee80211_tx_prep_agg(struct
- 		 * nothing -- this aggregation session is being started
- 		 * but that might still fail with the driver
- 		 */
--	} else {
-+	} else if (!tx->sta->sta.txq[tid]) {
- 		spin_lock(&tx->sta->lock);
- 		/*
- 		 * Need to re-check now, because we may get here
-@@ -1201,13 +1208,102 @@ ieee80211_tx_prepare(struct ieee80211_su
- 	return TX_CONTINUE;
- }
- 
-+static void ieee80211_drv_tx(struct ieee80211_local *local,
-+			     struct ieee80211_vif *vif,
-+			     struct ieee80211_sta *pubsta,
-+			     struct sk_buff *skb)
-+{
-+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
-+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-+	struct ieee80211_tx_control control = {
-+		.sta = pubsta,
-+	};
-+	struct ieee80211_txq *txq = NULL;
-+	struct txq_info *txqi;
-+	u8 ac;
-+
-+	if (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE)
-+		goto tx_normal;
-+
-+	if (!ieee80211_is_data(hdr->frame_control))
-+		goto tx_normal;
-+
-+	if (pubsta) {
-+		u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
-+
-+		txq = pubsta->txq[tid];
-+	} else if (vif) {
-+		txq = vif->txq;
-+	}
-+
-+	if (!txq)
-+		goto tx_normal;
-+
-+	ac = txq->ac;
-+	txqi = to_txq_info(txq);
-+	atomic_inc(&sdata->txqs_len[ac]);
-+	if (atomic_read(&sdata->txqs_len[ac]) >= local->hw.txq_ac_max_pending)
-+		netif_stop_subqueue(sdata->dev, ac);
-+
-+	skb_queue_tail(&txqi->queue, skb);
-+	drv_wake_tx_queue(local, txqi);
-+
-+	return;
-+
-+tx_normal:
-+	drv_tx(local, &control, skb);
-+}
-+
-+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
-+				     struct ieee80211_txq *txq)
-+{
-+	struct ieee80211_local *local = hw_to_local(hw);
-+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->vif);
-+	struct txq_info *txqi = container_of(txq, struct txq_info, txq);
-+	struct ieee80211_hdr *hdr;
-+	struct sk_buff *skb = NULL;
-+	u8 ac = txq->ac;
-+
-+	spin_lock_bh(&txqi->queue.lock);
-+
-+	if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags))
-+		goto out;
-+
-+	skb = __skb_dequeue(&txqi->queue);
-+	if (!skb)
-+		goto out;
-+
-+	atomic_dec(&sdata->txqs_len[ac]);
-+	if (__netif_subqueue_stopped(sdata->dev, ac))
-+		ieee80211_propagate_queue_wake(local, sdata->vif.hw_queue[ac]);
-+
-+	hdr = (struct ieee80211_hdr *)skb->data;
-+	if (txq->sta && ieee80211_is_data_qos(hdr->frame_control)) {
-+		struct sta_info *sta = container_of(txq->sta, struct sta_info,
-+						    sta);
-+		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-+
-+		hdr->seq_ctrl = ieee80211_tx_next_seq(sta, txq->tid);
-+		if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags))
-+			info->flags |= IEEE80211_TX_CTL_AMPDU;
-+		else
-+			info->flags &= ~IEEE80211_TX_CTL_AMPDU;
-+	}
-+
-+out:
-+	spin_unlock_bh(&txqi->queue.lock);
-+
-+	return skb;
-+}
-+EXPORT_SYMBOL(ieee80211_tx_dequeue);
-+
- static bool ieee80211_tx_frags(struct ieee80211_local *local,
- 			       struct ieee80211_vif *vif,
- 			       struct ieee80211_sta *sta,
- 			       struct sk_buff_head *skbs,
- 			       bool txpending)
- {
--	struct ieee80211_tx_control control;
- 	struct sk_buff *skb, *tmp;
- 	unsigned long flags;
- 
-@@ -1265,10 +1361,9 @@ static bool ieee80211_tx_frags(struct ie
- 		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- 
- 		info->control.vif = vif;
--		control.sta = sta;
- 
- 		__skb_unlink(skb, skbs);
--		drv_tx(local, &control, skb);
-+		ieee80211_drv_tx(local, vif, sta, skb);
- 	}
- 
- 	return true;
---- a/net/mac80211/util.c
-+++ b/net/mac80211/util.c
-@@ -308,6 +308,11 @@ void ieee80211_propagate_queue_wake(stru
- 		for (ac = 0; ac < n_acs; ac++) {
- 			int ac_queue = sdata->vif.hw_queue[ac];
- 
-+			if (local->ops->wake_tx_queue &&
-+			    (atomic_read(&sdata->txqs_len[ac]) >
-+			     local->hw.txq_ac_max_pending))
-+				continue;
-+
- 			if (ac_queue == queue ||
- 			    (sdata->vif.cab_queue == queue &&
- 			     local->queue_stop_reasons[ac_queue] == 0 &&
-@@ -3307,3 +3312,20 @@ u8 *ieee80211_add_wmm_info_ie(u8 *buf, u
- 
- 	return buf;
- }
-+
-+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata,
-+			     struct sta_info *sta,
-+			     struct txq_info *txqi, int tid)
-+{
-+	skb_queue_head_init(&txqi->queue);
-+	txqi->txq.vif = &sdata->vif;
-+
-+	if (sta) {
-+		txqi->txq.sta = &sta->sta;
-+		sta->sta.txq[tid] = &txqi->txq;
-+		txqi->txq.ac = ieee802_1d_to_ac[tid & 7];
-+	} else {
-+		sdata->vif.txq = &txqi->txq;
-+		txqi->txq.ac = IEEE80211_AC_BE;
-+	}
-+}
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1176,6 +1176,7 @@ static void sta_ps_start(struct sta_info
- 	struct ieee80211_sub_if_data *sdata = sta->sdata;
- 	struct ieee80211_local *local = sdata->local;
- 	struct ps_data *ps;
-+	int tid;
- 
- 	if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
- 	    sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-@@ -1189,6 +1190,18 @@ static void sta_ps_start(struct sta_info
- 		drv_sta_notify(local, sdata, STA_NOTIFY_SLEEP, &sta->sta);
- 	ps_dbg(sdata, "STA %pM aid %d enters power save mode\n",
- 	       sta->sta.addr, sta->sta.aid);
-+
-+	if (!sta->sta.txq[0])
-+		return;
-+
-+	for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
-+		struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
-+
-+		if (!skb_queue_len(&txqi->queue))
-+			set_bit(tid, &sta->txq_buffered_tids);
-+		else
-+			clear_bit(tid, &sta->txq_buffered_tids);
-+	}
- }
- 
- static void sta_ps_end(struct sta_info *sta)
---- a/net/mac80211/agg-tx.c
-+++ b/net/mac80211/agg-tx.c
-@@ -188,6 +188,43 @@ ieee80211_wake_queue_agg(struct ieee8021
- 	__release(agg_queue);
- }
- 
-+static void
-+ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
-+{
-+	struct ieee80211_txq *txq = sta->sta.txq[tid];
-+	struct txq_info *txqi;
-+
-+	if (!txq)
-+		return;
-+
-+	txqi = to_txq_info(txq);
-+
-+	/* Lock here to protect against further seqno updates on dequeue */
-+	spin_lock_bh(&txqi->queue.lock);
-+	set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
-+	spin_unlock_bh(&txqi->queue.lock);
-+}
-+
-+static void
-+ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
-+{
-+	struct ieee80211_txq *txq = sta->sta.txq[tid];
-+	struct txq_info *txqi;
-+
-+	if (!txq)
-+		return;
-+
-+	txqi = to_txq_info(txq);
-+
-+	if (enable)
-+		set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
-+	else
-+		clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
-+
-+	clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
-+	drv_wake_tx_queue(sta->sdata->local, txqi);
-+}
-+
- /*
-  * splice packets from the STA's pending to the local pending,
-  * requires a call to ieee80211_agg_splice_finish later
-@@ -247,6 +284,7 @@ static void ieee80211_remove_tid_tx(stru
- 	ieee80211_assign_tid_tx(sta, tid, NULL);
- 
- 	ieee80211_agg_splice_finish(sta->sdata, tid);
-+	ieee80211_agg_start_txq(sta, tid, false);
- 
- 	kfree_rcu(tid_tx, rcu_head);
- }
-@@ -418,6 +456,8 @@ void ieee80211_tx_ba_session_handle_star
- 	 */
- 	clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
- 
-+	ieee80211_agg_stop_txq(sta, tid);
-+
- 	/*
- 	 * Make sure no packets are being processed. This ensures that
- 	 * we have a valid starting sequence number and that in-flight
-@@ -440,6 +480,8 @@ void ieee80211_tx_ba_session_handle_star
- 		ieee80211_agg_splice_finish(sdata, tid);
- 		spin_unlock_bh(&sta->lock);
- 
-+		ieee80211_agg_start_txq(sta, tid, false);
-+
- 		kfree_rcu(tid_tx, rcu_head);
- 		return;
- 	}
-@@ -666,6 +708,8 @@ static void ieee80211_agg_tx_operational
- 	ieee80211_agg_splice_finish(sta->sdata, tid);
- 
- 	spin_unlock_bh(&sta->lock);
-+
-+	ieee80211_agg_start_txq(sta, tid, true);
- }
- 
- void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
diff --git a/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch b/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch
new file mode 100644
index 0000000000..a160dc4f02
--- /dev/null
+++ b/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch
@@ -0,0 +1,121 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 2 Jul 2015 15:20:56 +0200
+Subject: [PATCH] ath9k: limit retries for powersave response frames
+
+In some cases, the channel might be busy enough that an ath9k AP's
+response to PS-Poll frames might be too slow and the station has already
+gone to sleep. To avoid wasting too much airtime on this, limit the
+number of retries on such frames and ensure that no sample rate gets
+used.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -136,10 +136,25 @@ static void ath_send_bar(struct ath_atx_
+ }
+ 
+ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+-			  struct ath_buf *bf)
++			  struct ath_buf *bf, bool ps)
+ {
++	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
++
++	if (ps) {
++		/* Clear the first rate to avoid using a sample rate for PS frames */
++		info->control.rates[0].idx = -1;
++		info->control.rates[0].count = 0;
++	}
++
+ 	ieee80211_get_tx_rates(vif, sta, bf->bf_mpdu, bf->rates,
+ 			       ARRAY_SIZE(bf->rates));
++	if (!ps)
++		return;
++
++	if (bf->rates[0].count > 2)
++		bf->rates[0].count = 2;
++
++	bf->rates[1].idx = -1;
+ }
+ 
+ static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
+@@ -1419,7 +1434,7 @@ ath_tx_form_burst(struct ath_softc *sc,
+ 		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ 			break;
+ 
+-		ath_set_rates(tid->an->vif, tid->an->sta, bf);
++		ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ 	} while (1);
+ }
+ 
+@@ -1450,7 +1465,7 @@ static bool ath_tx_sched_aggr(struct ath
+ 		return false;
+ 	}
+ 
+-	ath_set_rates(tid->an->vif, tid->an->sta, bf);
++	ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ 	if (aggr)
+ 		last = ath_tx_form_aggr(sc, txq, tid, &bf_q, bf,
+ 					tid_q, &aggr_len);
+@@ -1647,7 +1662,7 @@ void ath9k_release_buffered_frames(struc
+ 
+ 			__skb_unlink(bf->bf_mpdu, tid_q);
+ 			list_add_tail(&bf->list, &bf_q);
+-			ath_set_rates(tid->an->vif, tid->an->sta, bf);
++			ath_set_rates(tid->an->vif, tid->an->sta, bf, true);
+ 			if (bf_isampdu(bf)) {
+ 				ath_tx_addto_baw(sc, tid, bf);
+ 				bf->bf_state.bf_type &= ~BUF_AGGR;
+@@ -2293,7 +2308,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ 	struct ath_txq *txq = txctl->txq;
+ 	struct ath_atx_tid *tid = NULL;
+ 	struct ath_buf *bf;
+-	bool queue, skip_uapsd = false, ps_resp;
++	bool queue, ps_resp;
+ 	int q, ret;
+ 
+ 	if (vif)
+@@ -2346,13 +2361,13 @@ int ath_tx_start(struct ieee80211_hw *hw
+ 		if (!txctl->an)
+ 			txctl->an = &avp->mcast_node;
+ 		queue = true;
+-		skip_uapsd = true;
++		ps_resp = false;
+ 	}
+ 
+ 	if (txctl->an && queue)
+ 		tid = ath_get_skb_tid(sc, txctl->an, skb);
+ 
+-	if (!skip_uapsd && ps_resp) {
++	if (ps_resp) {
+ 		ath_txq_unlock(sc, txq);
+ 		txq = sc->tx.uapsdq;
+ 		ath_txq_lock(sc, txq);
+@@ -2390,7 +2405,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ 	if (txctl->paprd)
+ 		bf->bf_state.bfs_paprd_timestamp = jiffies;
+ 
+-	ath_set_rates(vif, sta, bf);
++	ath_set_rates(vif, sta, bf, ps_resp);
+ 	ath_tx_send_normal(sc, txq, tid, skb);
+ 
+ out:
+@@ -2429,7 +2444,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw
+ 			break;
+ 
+ 		bf->bf_lastbf = bf;
+-		ath_set_rates(vif, NULL, bf);
++		ath_set_rates(vif, NULL, bf, false);
+ 		ath_buf_set_rate(sc, bf, &info, fi->framelen, false);
+ 		duration += info.rates[0].PktDuration;
+ 		if (bf_tail)
+@@ -2932,7 +2947,7 @@ int ath9k_tx99_send(struct ath_softc *sc
+ 		return -EINVAL;
+ 	}
+ 
+-	ath_set_rates(sc->tx99_vif, NULL, bf);
++	ath_set_rates(sc->tx99_vif, NULL, bf, false);
+ 
+ 	ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
+ 	ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
diff --git a/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch b/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch
deleted file mode 100644
index 465d94319d..0000000000
--- a/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Wed, 11 Mar 2015 09:14:15 +0100
-Subject: [PATCH] mac80211: lock rate control
-
-Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate
-control aren't properly taking concurrency into account. It's
-likely that the same is true for other rate control algorithms.
-
-In the case of minstrel this manifests itself in crashes when an
-update and other data access are run concurrently, for example
-when the stations change bandwidth or similar. In iwlwifi, this
-can cause firmware crashes.
-
-Since fixing all rate control algorithms will be very difficult,
-just provide locking for invocations. This protects the internal
-data structures the algorithms maintain.
-
-I've manipulated hostapd to test this, by having it change its
-advertised bandwidth roughly ever 150ms. At the same time, I'm
-running a flood ping between the client and the AP, which causes
-this race of update vs. get_rate/status to easily happen on the
-client. With this change, the system survives this test.
-
-Reported-by: Sven Eckelmann <sven@open-mesh.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/rate.c
-+++ b/net/mac80211/rate.c
-@@ -683,7 +683,13 @@ void rate_control_get_rate(struct ieee80
- 	if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
- 		return;
- 
--	ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
-+	if (ista) {
-+		spin_lock_bh(&sta->rate_ctrl_lock);
-+		ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
-+		spin_unlock_bh(&sta->rate_ctrl_lock);
-+	} else {
-+		ref->ops->get_rate(ref->priv, NULL, NULL, txrc);
-+	}
- 
- 	if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_RC_TABLE)
- 		return;
---- a/net/mac80211/rate.h
-+++ b/net/mac80211/rate.h
-@@ -42,10 +42,12 @@ static inline void rate_control_tx_statu
- 	if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
- 		return;
- 
-+	spin_lock_bh(&sta->rate_ctrl_lock);
- 	if (ref->ops->tx_status)
- 		ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
- 	else
- 		ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info);
-+	spin_unlock_bh(&sta->rate_ctrl_lock);
- }
- 
- static inline void
-@@ -64,7 +66,9 @@ rate_control_tx_status_noskb(struct ieee
- 	if (WARN_ON_ONCE(!ref->ops->tx_status_noskb))
- 		return;
- 
-+	spin_lock_bh(&sta->rate_ctrl_lock);
- 	ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info);
-+	spin_unlock_bh(&sta->rate_ctrl_lock);
- }
- 
- static inline void rate_control_rate_init(struct sta_info *sta)
-@@ -91,8 +95,10 @@ static inline void rate_control_rate_ini
- 
- 	sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
- 
-+	spin_lock_bh(&sta->rate_ctrl_lock);
- 	ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
- 			    priv_sta);
-+	spin_unlock_bh(&sta->rate_ctrl_lock);
- 	rcu_read_unlock();
- 	set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
- }
-@@ -115,18 +121,20 @@ static inline void rate_control_rate_upd
- 			return;
- 		}
- 
-+		spin_lock_bh(&sta->rate_ctrl_lock);
- 		ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def,
- 				      ista, priv_sta, changed);
-+		spin_unlock_bh(&sta->rate_ctrl_lock);
- 		rcu_read_unlock();
- 	}
- 	drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
- }
- 
- static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
--					   struct ieee80211_sta *sta,
--					   gfp_t gfp)
-+					   struct sta_info *sta, gfp_t gfp)
- {
--	return ref->ops->alloc_sta(ref->priv, sta, gfp);
-+	spin_lock_init(&sta->rate_ctrl_lock);
-+	return ref->ops->alloc_sta(ref->priv, &sta->sta, gfp);
- }
- 
- static inline void rate_control_free_sta(struct sta_info *sta)
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -286,7 +286,7 @@ static int sta_prepare_rate_control(stru
- 
- 	sta->rate_ctrl = local->rate_ctrl;
- 	sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl,
--						     &sta->sta, gfp);
-+						     sta, gfp);
- 	if (!sta->rate_ctrl_priv)
- 		return -ENOMEM;
- 
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -349,6 +349,7 @@ struct sta_info {
- 	u8 ptk_idx;
- 	struct rate_control_ref *rate_ctrl;
- 	void *rate_ctrl_priv;
-+	spinlock_t rate_ctrl_lock;
- 	spinlock_t lock;
- 
- 	struct work_struct drv_deliver_wk;
diff --git a/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch b/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch
deleted file mode 100644
index e54e16eb05..0000000000
--- a/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:29 +0100
-Subject: [PATCH] ath9k: restart only triggering DFS detector line
-
-To support HT40 DFS mode, a triggering detector must
-reset only itself but not other detector lines.
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/dfs_pattern_detector.c
-+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
-@@ -289,7 +289,7 @@ dpd_add_pulse(struct dfs_pattern_detecto
- 				"count=%d, count_false=%d\n",
- 				event->freq, pd->rs->type_id,
- 				ps->pri, ps->count, ps->count_falses);
--			channel_detector_reset(dpd, cd);
-+			pd->reset(pd, dpd->last_pulse_ts);
- 			return true;
- 		}
- 	}
diff --git a/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch b/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch
new file mode 100644
index 0000000000..22b987aa7a
--- /dev/null
+++ b/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch
@@ -0,0 +1,95 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 14 Jan 2016 03:14:03 +0100
+Subject: [PATCH] ath9k_hw: add low power tx gain table for AR953x
+
+Used in some newer TP-Link AR9533 devices.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+@@ -698,6 +698,9 @@ static void ar9003_tx_gain_table_mode2(s
+ 	else if (AR_SREV_9340(ah))
+ 		INIT_INI_ARRAY(&ah->iniModesTxGain,
+ 			ar9340Modes_low_ob_db_tx_gain_table_1p0);
++	else if (AR_SREV_9531_11(ah))
++		INIT_INI_ARRAY(&ah->iniModesTxGain,
++			       qca953x_1p1_modes_no_xpa_low_power_tx_gain_table);
+ 	else if (AR_SREV_9485_11_OR_LATER(ah))
+ 		INIT_INI_ARRAY(&ah->iniModesTxGain,
+ 			ar9485Modes_low_ob_db_tx_gain_1_1);
+--- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
++++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
+@@ -757,6 +757,71 @@ static const u32 qca953x_1p1_modes_xpa_t
+ 	{0x00016448, 0x6c927a70},
+ };
+ 
++static const u32 qca953x_1p1_modes_no_xpa_low_power_tx_gain_table[][2] = {
++	/* Addr      allmodes  */
++	{0x0000a2dc, 0xfff55592},
++	{0x0000a2e0, 0xfff99924},
++	{0x0000a2e4, 0xfffe1e00},
++	{0x0000a2e8, 0xffffe000},
++	{0x0000a410, 0x000050d6},
++	{0x0000a500, 0x00000069},
++	{0x0000a504, 0x0400006b},
++	{0x0000a508, 0x0800006d},
++	{0x0000a50c, 0x0c000269},
++	{0x0000a510, 0x1000026b},
++	{0x0000a514, 0x1400026d},
++	{0x0000a518, 0x18000669},
++	{0x0000a51c, 0x1c00066b},
++	{0x0000a520, 0x1d000a68},
++	{0x0000a524, 0x21000a6a},
++	{0x0000a528, 0x25000a6c},
++	{0x0000a52c, 0x29000a6e},
++	{0x0000a530, 0x2d0012a9},
++	{0x0000a534, 0x310012ab},
++	{0x0000a538, 0x350012ad},
++	{0x0000a53c, 0x39001b0a},
++	{0x0000a540, 0x3d001b0c},
++	{0x0000a544, 0x41001b0e},
++	{0x0000a548, 0x43001bae},
++	{0x0000a54c, 0x45001914},
++	{0x0000a550, 0x47001916},
++	{0x0000a554, 0x49001b96},
++	{0x0000a558, 0x49001b96},
++	{0x0000a55c, 0x49001b96},
++	{0x0000a560, 0x49001b96},
++	{0x0000a564, 0x49001b96},
++	{0x0000a568, 0x49001b96},
++	{0x0000a56c, 0x49001b96},
++	{0x0000a570, 0x49001b96},
++	{0x0000a574, 0x49001b96},
++	{0x0000a578, 0x49001b96},
++	{0x0000a57c, 0x49001b96},
++	{0x0000a600, 0x00000000},
++	{0x0000a604, 0x00000000},
++	{0x0000a608, 0x00000000},
++	{0x0000a60c, 0x00000000},
++	{0x0000a610, 0x00000000},
++	{0x0000a614, 0x00000000},
++	{0x0000a618, 0x00804201},
++	{0x0000a61c, 0x01408201},
++	{0x0000a620, 0x01408502},
++	{0x0000a624, 0x01408502},
++	{0x0000a628, 0x01408502},
++	{0x0000a62c, 0x01408502},
++	{0x0000a630, 0x01408502},
++	{0x0000a634, 0x01408502},
++	{0x0000a638, 0x01408502},
++	{0x0000a63c, 0x01408502},
++	{0x0000b2dc, 0xfff55592},
++	{0x0000b2e0, 0xfff99924},
++	{0x0000b2e4, 0xfffe1e00},
++	{0x0000b2e8, 0xffffe000},
++	{0x00016044, 0x044922db},
++	{0x00016048, 0x6c927a70},
++	{0x00016444, 0x044922db},
++	{0x00016448, 0x6c927a70},
++};
++
+ static const u32 qca953x_2p0_baseband_core[][2] = {
+ 	/* Addr      allmodes  */
+ 	{0x00009800, 0xafe68e30},
diff --git a/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch b/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch
deleted file mode 100644
index ed268eacf9..0000000000
--- a/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:30 +0100
-Subject: [PATCH] ath9k: add DFS support for extension channel
-
-In HT40 modes, pulse events on primary and extension
-channel are processed individually. If valid, a pulse
-event will be fed into the detector
-* for primary frequency, or
-* for extension frequency (+/-20MHz based on HT40-mode)
-* or both
-
-With that, a 40MHz radar will result in two individual
-radar events.
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/dfs.c
-+++ b/drivers/net/wireless/ath/ath9k/dfs.c
-@@ -126,8 +126,19 @@ ath9k_postprocess_radar_event(struct ath
- 	DFS_STAT_INC(sc, pulses_detected);
- 	return true;
- }
--#undef PRI_CH_RADAR_FOUND
--#undef EXT_CH_RADAR_FOUND
-+
-+static void
-+ath9k_dfs_process_radar_pulse(struct ath_softc *sc, struct pulse_event *pe)
-+{
-+	struct dfs_pattern_detector *pd = sc->dfs_detector;
-+	DFS_STAT_INC(sc, pulses_processed);
-+	if (pd == NULL)
-+		return;
-+	if (!pd->add_pulse(pd, pe))
-+		return;
-+	DFS_STAT_INC(sc, radar_detected);
-+	ieee80211_radar_detected(sc->hw);
-+}
- 
- /*
-  * DFS: check PHY-error for radar pulse and feed the detector
-@@ -176,18 +187,21 @@ void ath9k_dfs_process_phyerr(struct ath
- 	ard.pulse_length_pri = vdata_end[-3];
- 	pe.freq = ah->curchan->channel;
- 	pe.ts = mactime;
--	if (ath9k_postprocess_radar_event(sc, &ard, &pe)) {
--		struct dfs_pattern_detector *pd = sc->dfs_detector;
--		ath_dbg(common, DFS,
--			"ath9k_dfs_process_phyerr: channel=%d, ts=%llu, "
--			"width=%d, rssi=%d, delta_ts=%llu\n",
--			pe.freq, pe.ts, pe.width, pe.rssi,
--			pe.ts - sc->dfs_prev_pulse_ts);
--		sc->dfs_prev_pulse_ts = pe.ts;
--		DFS_STAT_INC(sc, pulses_processed);
--		if (pd != NULL && pd->add_pulse(pd, &pe)) {
--			DFS_STAT_INC(sc, radar_detected);
--			ieee80211_radar_detected(sc->hw);
--		}
-+	if (!ath9k_postprocess_radar_event(sc, &ard, &pe))
-+		return;
-+
-+	ath_dbg(common, DFS,
-+		"ath9k_dfs_process_phyerr: type=%d, freq=%d, ts=%llu, "
-+		"width=%d, rssi=%d, delta_ts=%llu\n",
-+		ard.pulse_bw_info, pe.freq, pe.ts, pe.width, pe.rssi,
-+		pe.ts - sc->dfs_prev_pulse_ts);
-+	sc->dfs_prev_pulse_ts = pe.ts;
-+	if (ard.pulse_bw_info & PRI_CH_RADAR_FOUND)
-+		ath9k_dfs_process_radar_pulse(sc, &pe);
-+	if (ard.pulse_bw_info & EXT_CH_RADAR_FOUND) {
-+		pe.freq += IS_CHAN_HT40PLUS(ah->curchan) ? 20 : -20;
-+		ath9k_dfs_process_radar_pulse(sc, &pe);
- 	}
- }
-+#undef PRI_CH_RADAR_FOUND
-+#undef EXT_CH_RADAR_FOUND
diff --git a/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch b/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch
new file mode 100644
index 0000000000..7bb74353eb
--- /dev/null
+++ b/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch
@@ -0,0 +1,156 @@
+From: Eli Cooper <elicooper@gmx.com>
+Date: Thu, 14 Jan 2016 00:07:12 +0800
+Subject: [PATCH] rt2x00: fix monitor mode regression
+
+Since commit df1404650ccbfeb76a84f301f22316be0d00a864 monitor mode for rt2x00
+has been made effectively useless because the hardware filter is configured to
+drop packets whose intended recipient is not the device, regardless of the
+presence of monitor mode interfaces.
+
+This patch fixes this regression by adding explicit monitor mode support, and
+configuring the hardware filter accordingly.
+
+Signed-off-by: Eli Cooper <elicooper@gmx.com>
+---
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+@@ -273,8 +273,10 @@ static void rt2400pci_config_filter(stru
+ 			   !(filter_flags & FIF_PLCPFAIL));
+ 	rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
+ 			   !(filter_flags & FIF_CONTROL));
+-	rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, 1);
++	rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
++			   !rt2x00dev->is_monitoring);
+ 	rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
++			   !rt2x00dev->is_monitoring &&
+ 			   !rt2x00dev->intf_ap_count);
+ 	rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
+ 	rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg);
+--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+@@ -274,8 +274,10 @@ static void rt2500pci_config_filter(stru
+ 			   !(filter_flags & FIF_PLCPFAIL));
+ 	rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
+ 			   !(filter_flags & FIF_CONTROL));
+-	rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, 1);
++	rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
++			   !rt2x00dev->is_monitoring);
+ 	rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
++			   !rt2x00dev->is_monitoring &&
+ 			   !rt2x00dev->intf_ap_count);
+ 	rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
+ 	rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
+--- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
+@@ -437,8 +437,10 @@ static void rt2500usb_config_filter(stru
+ 			   !(filter_flags & FIF_PLCPFAIL));
+ 	rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL,
+ 			   !(filter_flags & FIF_CONTROL));
+-	rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME, 1);
++	rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME,
++			   !rt2x00dev->is_monitoring);
+ 	rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS,
++			   !rt2x00dev->is_monitoring &&
+ 			   !rt2x00dev->intf_ap_count);
+ 	rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
+ 	rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST,
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -1490,7 +1490,8 @@ void rt2800_config_filter(struct rt2x00_
+ 			   !(filter_flags & FIF_FCSFAIL));
+ 	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+ 			   !(filter_flags & FIF_PLCPFAIL));
+-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME, 1);
++	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
++			   !rt2x00dev->is_monitoring);
+ 	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+ 	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+ 	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -844,11 +844,13 @@ struct rt2x00_dev {
+ 	 *  - Open sta interface count.
+ 	 *  - Association count.
+ 	 *  - Beaconing enabled count.
++	 *  - Whether the device is monitoring.
+ 	 */
+ 	unsigned int intf_ap_count;
+ 	unsigned int intf_sta_count;
+ 	unsigned int intf_associated;
+ 	unsigned int intf_beaconing;
++	bool is_monitoring;
+ 
+ 	/*
+ 	 * Interface combinations
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00config.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00config.c
+@@ -244,6 +244,16 @@ void rt2x00lib_config(struct rt2x00_dev
+ 	    (ieee80211_flags & IEEE80211_CONF_CHANGE_PS))
+ 		cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+ 
++	if (ieee80211_flags & IEEE80211_CONF_CHANGE_MONITOR) {
++		if (conf->flags & IEEE80211_CONF_MONITOR) {
++			rt2x00_dbg(rt2x00dev, "Monitor mode is enabled\n");
++			rt2x00dev->is_monitoring = true;
++		} else {
++			rt2x00_dbg(rt2x00dev, "Monitor mode is disabled\n");
++			rt2x00dev->is_monitoring = false;
++		}
++	}
++
+ 	/*
+ 	 * Start configuration.
+ 	 */
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -1204,6 +1204,7 @@ int rt2x00lib_start(struct rt2x00_dev *r
+ 	rt2x00dev->intf_ap_count = 0;
+ 	rt2x00dev->intf_sta_count = 0;
+ 	rt2x00dev->intf_associated = 0;
++	rt2x00dev->is_monitoring = false;
+ 
+ 	/* Enable the radio */
+ 	retval = rt2x00lib_enable_radio(rt2x00dev);
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
+@@ -385,11 +385,6 @@ void rt2x00mac_configure_filter(struct i
+ 			*total_flags |= FIF_PSPOLL;
+ 	}
+ 
+-	/*
+-	 * Check if there is any work left for us.
+-	 */
+-	if (rt2x00dev->packet_filter == *total_flags)
+-		return;
+ 	rt2x00dev->packet_filter = *total_flags;
+ 
+ 	rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags);
+--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+@@ -530,8 +530,10 @@ static void rt61pci_config_filter(struct
+ 			   !(filter_flags & FIF_PLCPFAIL));
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
+ 			   !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
+-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME, 1);
++	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
++			   !rt2x00dev->is_monitoring);
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
++			   !rt2x00dev->is_monitoring &&
+ 			   !rt2x00dev->intf_ap_count);
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
+--- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
+@@ -480,8 +480,10 @@ static void rt73usb_config_filter(struct
+ 			   !(filter_flags & FIF_PLCPFAIL));
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
+ 			   !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
+-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME, 1);
++	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
++			   !rt2x00dev->is_monitoring);
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
++			   !rt2x00dev->is_monitoring &&
+ 			   !rt2x00dev->intf_ap_count);
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
+ 	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
diff --git a/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch b/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch
deleted file mode 100644
index e1eab64ebe..0000000000
--- a/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:31 +0100
-Subject: [PATCH] ath9k: allow 40MHz radar detection width
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -763,7 +763,8 @@ static const struct ieee80211_iface_comb
- 		.num_different_channels = 1,
- 		.beacon_int_infra_match = true,
- 		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
--					BIT(NL80211_CHAN_WIDTH_20),
-+					BIT(NL80211_CHAN_WIDTH_20) |
-+					BIT(NL80211_CHAN_WIDTH_40),
- 	}
- #endif
- };
diff --git a/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch b/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch
new file mode 100644
index 0000000000..049059aa24
--- /dev/null
+++ b/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch
@@ -0,0 +1,32 @@
+From: Miaoqing Pan <miaoqing@codeaurora.org>
+Date: Fri, 15 Jan 2016 18:17:17 +0800
+Subject: [PATCH] ath9k: avoid ANI restart if no trigger
+
+Fixes commit 54da20d83f0e ("ath9k_hw: improve ANI processing and rx desensitizing parameters")
+
+Call ath9k_ani_restart() only when the phy error rate reach the
+ANI immunity threshold. Sync the logic with internal code base.
+
+Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ani.c
++++ b/drivers/net/wireless/ath/ath9k/ani.c
+@@ -444,14 +444,16 @@ void ath9k_hw_ani_monitor(struct ath_hw
+ 		    ofdmPhyErrRate < ah->config.ofdm_trig_low) {
+ 			ath9k_hw_ani_lower_immunity(ah);
+ 			aniState->ofdmsTurn = !aniState->ofdmsTurn;
++			ath9k_ani_restart(ah);
+ 		} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
+ 			ath9k_hw_ani_ofdm_err_trigger(ah);
+ 			aniState->ofdmsTurn = false;
++			ath9k_ani_restart(ah);
+ 		} else if (cckPhyErrRate > ah->config.cck_trig_high) {
+ 			ath9k_hw_ani_cck_err_trigger(ah);
+ 			aniState->ofdmsTurn = true;
++			ath9k_ani_restart(ah);
+ 		}
+-		ath9k_ani_restart(ah);
+ 	}
+ }
+ EXPORT_SYMBOL(ath9k_hw_ani_monitor);
diff --git a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch b/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch
deleted file mode 100644
index 4cfa53f6c0..0000000000
--- a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Date: Wed, 4 Mar 2015 05:12:10 +0300
-Subject: [PATCH] ath5k: channel change fix
-
-ath5k updates the channel pointer and after that it stops the Rx logic
-and apply channel to HW. In case of channel switch, such sequence
-creates a small window when a frame, which is received on the old
-channel is considered as a frame received on the new one.
-
-The most notable consequence of this situation occurs during the switch
-from 2 GHz band (CCK+OFDM) to the 5GHz band (OFDM-only). Frame received
-with CCK rate, e.g. beacon received at the 1mbps, causes the following
-warning:
-
-  WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]()
-  invalid hw_rix: 1a
-  [..]
-  Call Trace:
-  [<802656a8>] show_stack+0x48/0x70
-  [<802dd92c>] warn_slowpath_common+0x88/0xbc
-  [<802dd98c>] warn_slowpath_fmt+0x2c/0x38
-  [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k]
-  [<8028ac64>] tasklet_action+0x8c/0xf0
-  [<80075804>] __do_softirq+0x180/0x32c
-  [<80196ce8>] irq_exit+0x54/0x70
-  [<80041848>] ret_from_irq+0x0/0x4
-  [<80182fdc>] ioread32+0x4/0xc
-  [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k]
-  [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k]
-  [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k]
-  [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k]
-  [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211]
-  [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211]
-  [<8022c3f4>] process_one_work+0x28c/0x400
-  [<802df8f8>] worker_thread+0x258/0x3c0
-  [<801b5710>] kthread+0xe0/0xec
-  [<800418a8>] ret_from_kernel_thread+0x14/0x1c
-
-The easiest way to reproduce this warning is to run scan with dualband
-NIC in noisy environments, when the channel 11 runs multiple APs. In my
-tests if the APs num >= 12, the warning appears in the first few
-seconds of scanning.
-
-In order to fix this, the Rx disable code moved to a higher level and
-placed before the channel pointer update. This is also makes the code a
-bit more symmetrical, since we disable and enable the Rx in the same
-function.
-
-In fact, at the pointer update time new frames should not appear,
-because interrupt generation at this point should already be disabled.
-The next patch should address this issue.
-
-CC: Jiri Slaby <jirislaby@gmail.com>
-CC: Nick Kossifidis <mickflemm@gmail.com>
-CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Eric Bree <ebree@nltinc.com>
-Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath5k/base.c
-+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -2858,7 +2858,7 @@ ath5k_reset(struct ath5k_hw *ah, struct
- {
- 	struct ath_common *common = ath5k_hw_common(ah);
- 	int ret, ani_mode;
--	bool fast;
-+	bool fast = chan && modparam_fastchanswitch ? 1 : 0;
- 
- 	ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
- 
-@@ -2876,11 +2876,29 @@ ath5k_reset(struct ath5k_hw *ah, struct
- 	 * so we should also free any remaining
- 	 * tx buffers */
- 	ath5k_drain_tx_buffs(ah);
-+
-+	/* Stop PCU */
-+	ath5k_hw_stop_rx_pcu(ah);
-+
-+	/* Stop DMA
-+	 *
-+	 * Note: If DMA didn't stop continue
-+	 * since only a reset will fix it.
-+	 */
-+	ret = ath5k_hw_dma_stop(ah);
-+
-+	/* RF Bus grant won't work if we have pending
-+	 * frames
-+	 */
-+	if (ret && fast) {
-+		ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
-+			  "DMA didn't stop, falling back to normal reset\n");
-+		fast = false;
-+	}
-+
- 	if (chan)
- 		ah->curchan = chan;
- 
--	fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
--
- 	ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu);
- 	if (ret) {
- 		ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret);
---- a/drivers/net/wireless/ath/ath5k/reset.c
-+++ b/drivers/net/wireless/ath/ath5k/reset.c
-@@ -1169,30 +1169,6 @@ ath5k_hw_reset(struct ath5k_hw *ah, enum
- 	if (ah->ah_version == AR5K_AR5212)
- 		ath5k_hw_set_sleep_clock(ah, false);
- 
--	/*
--	 * Stop PCU
--	 */
--	ath5k_hw_stop_rx_pcu(ah);
--
--	/*
--	 * Stop DMA
--	 *
--	 * Note: If DMA didn't stop continue
--	 * since only a reset will fix it.
--	 */
--	ret = ath5k_hw_dma_stop(ah);
--
--	/* RF Bus grant won't work if we have pending
--	 * frames */
--	if (ret && fast) {
--		ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
--			"DMA didn't stop, falling back to normal reset\n");
--		fast = false;
--		/* Non fatal, just continue with
--		 * normal reset */
--		ret = 0;
--	}
--
- 	mode = channel->hw_value;
- 	switch (mode) {
- 	case AR5K_MODE_11A:
diff --git a/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch b/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch
new file mode 100644
index 0000000000..a1ac67c828
--- /dev/null
+++ b/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch
@@ -0,0 +1,91 @@
+From: Miaoqing Pan <miaoqing@codeaurora.org>
+Date: Fri, 15 Jan 2016 18:17:18 +0800
+Subject: [PATCH] ath9k: clean up ANI per-channel pointer checking
+
+commit c24bd3620c50 ("ath9k: Do not maintain ANI state per-channel")
+removed per-channel handling, the code to check 'curchan' also
+should be removed as never used.
+
+Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ani.c
++++ b/drivers/net/wireless/ath/ath9k/ani.c
+@@ -126,12 +126,8 @@ static void ath9k_hw_update_mibstats(str
+ 
+ static void ath9k_ani_restart(struct ath_hw *ah)
+ {
+-	struct ar5416AniState *aniState;
+-
+-	if (!ah->curchan)
+-		return;
++	struct ar5416AniState *aniState = &ah->ani;
+ 
+-	aniState = &ah->ani;
+ 	aniState->listenTime = 0;
+ 
+ 	ENABLE_REGWRITE_BUFFER(ah);
+@@ -221,12 +217,7 @@ static void ath9k_hw_set_ofdm_nil(struct
+ 
+ static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
+ {
+-	struct ar5416AniState *aniState;
+-
+-	if (!ah->curchan)
+-		return;
+-
+-	aniState = &ah->ani;
++	struct ar5416AniState *aniState = &ah->ani;
+ 
+ 	if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL)
+ 		ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1, false);
+@@ -281,12 +272,7 @@ static void ath9k_hw_set_cck_nil(struct
+ 
+ static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
+ {
+-	struct ar5416AniState *aniState;
+-
+-	if (!ah->curchan)
+-		return;
+-
+-	aniState = &ah->ani;
++	struct ar5416AniState *aniState = &ah->ani;
+ 
+ 	if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL)
+ 		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1,
+@@ -299,9 +285,7 @@ static void ath9k_hw_ani_cck_err_trigger
+  */
+ static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah)
+ {
+-	struct ar5416AniState *aniState;
+-
+-	aniState = &ah->ani;
++	struct ar5416AniState *aniState = &ah->ani;
+ 
+ 	/* lower OFDM noise immunity */
+ 	if (aniState->ofdmNoiseImmunityLevel > 0 &&
+@@ -329,7 +313,7 @@ void ath9k_ani_reset(struct ath_hw *ah,
+ 	struct ath_common *common = ath9k_hw_common(ah);
+ 	int ofdm_nil, cck_nil;
+ 
+-	if (!ah->curchan)
++	if (!chan)
+ 		return;
+ 
+ 	BUG_ON(aniState == NULL);
+@@ -416,14 +400,10 @@ static bool ath9k_hw_ani_read_counters(s
+ 
+ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
+ {
+-	struct ar5416AniState *aniState;
++	struct ar5416AniState *aniState = &ah->ani;
+ 	struct ath_common *common = ath9k_hw_common(ah);
+ 	u32 ofdmPhyErrRate, cckPhyErrRate;
+ 
+-	if (!ah->curchan)
+-		return;
+-
+-	aniState = &ah->ani;
+ 	if (!ath9k_hw_ani_read_counters(ah))
+ 		return;
+ 
diff --git a/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch b/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch
deleted file mode 100644
index 85a190481b..0000000000
--- a/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Date: Wed, 4 Mar 2015 05:12:11 +0300
-Subject: [PATCH] ath5k: fix reset race
-
-To prepare for reset ath5k should finish all asynchronous tasks. At
-first, it disables the interrupt generation, then it waits for the
-interrupt handler and tasklets completion, and then proceeds to the HW
-configuration update. But it does not consider that the interrupt
-handler or tasklet re-enables the interrupt generation. And we fall in a
-situation when ath5k assumes that interrupts are disabled, but it is
-not.
-
-This can lead to different consequences, such as reception of the frame,
-when we do not expect it. Under certain circumstances, this can lead to
-the following warning:
-
-  WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]()
-  invalid hw_rix: 1a
-  [..]
-  Call Trace:
-  [<802656a8>] show_stack+0x48/0x70
-  [<802dd92c>] warn_slowpath_common+0x88/0xbc
-  [<802dd98c>] warn_slowpath_fmt+0x2c/0x38
-  [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k]
-  [<8028ac64>] tasklet_action+0x8c/0xf0
-  [<80075804>] __do_softirq+0x180/0x32c
-  [<80196ce8>] irq_exit+0x54/0x70
-  [<80041848>] ret_from_irq+0x0/0x4
-  [<80182fdc>] ioread32+0x4/0xc
-  [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k]
-  [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k]
-  [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k]
-  [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k]
-  [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211]
-  [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211]
-  [<8022c3f4>] process_one_work+0x28c/0x400
-  [<802df8f8>] worker_thread+0x258/0x3c0
-  [<801b5710>] kthread+0xe0/0xec
-  [<800418a8>] ret_from_kernel_thread+0x14/0x1c
-
-Fix this issue by adding a new status flag, which forbids to re-enable
-the interrupt generation until the HW configuration is completed.
-
-Note: previous patch, which reorders the Rx disable code helps to avoid
-the above warning, but not fixes the root cause of unexpected frame
-receiving.
-
-CC: Jiri Slaby <jirislaby@gmail.com>
-CC: Nick Kossifidis <mickflemm@gmail.com>
-CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Eric Bree <ebree@nltinc.com>
-Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath5k/ath5k.h
-+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
-@@ -1283,6 +1283,7 @@ struct ath5k_hw {
- #define ATH_STAT_PROMISC	1
- #define ATH_STAT_LEDSOFT	2		/* enable LED gpio status */
- #define ATH_STAT_STARTED	3		/* opened & irqs enabled */
-+#define ATH_STAT_RESET		4		/* hw reset */
- 
- 	unsigned int		filter_flags;	/* HW flags, AR5K_RX_FILTER_* */
- 	unsigned int		fif_filter_flags; /* Current FIF_* filter flags */
---- a/drivers/net/wireless/ath/ath5k/base.c
-+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -1523,6 +1523,9 @@ ath5k_set_current_imask(struct ath5k_hw
- 	enum ath5k_int imask;
- 	unsigned long flags;
- 
-+	if (test_bit(ATH_STAT_RESET, ah->status))
-+		return;
-+
- 	spin_lock_irqsave(&ah->irqlock, flags);
- 	imask = ah->imask;
- 	if (ah->rx_pending)
-@@ -2862,6 +2865,8 @@ ath5k_reset(struct ath5k_hw *ah, struct
- 
- 	ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
- 
-+	__set_bit(ATH_STAT_RESET, ah->status);
-+
- 	ath5k_hw_set_imr(ah, 0);
- 	synchronize_irq(ah->irq);
- 	ath5k_stop_tasklets(ah);
-@@ -2952,6 +2957,8 @@ ath5k_reset(struct ath5k_hw *ah, struct
- 	 */
- /*	ath5k_chan_change(ah, c); */
- 
-+	__clear_bit(ATH_STAT_RESET, ah->status);
-+
- 	ath5k_beacon_config(ah);
- 	/* intrs are enabled by ath5k_beacon_config */
- 
diff --git a/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch b/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch
new file mode 100644
index 0000000000..cf8194aa33
--- /dev/null
+++ b/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch
@@ -0,0 +1,31 @@
+From: Miaoqing Pan <miaoqing@codeaurora.org>
+Date: Fri, 15 Jan 2016 18:17:19 +0800
+Subject: [PATCH] ath9k: do not reset while BB panic(0x4000409) on ar9561
+
+BB panic(0x4000409) observed while AP enabling/disabling
+bursting.
+
+Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+@@ -2071,7 +2071,8 @@ void ar9003_hw_attach_phy_ops(struct ath
+  *             to be disabled.
+  *
+  * 0x04000409: Packet stuck on receive.
+- *             Full chip reset is required for all chips except AR9340.
++ *             Full chip reset is required for all chips except
++ *	       AR9340, AR9531 and AR9561.
+  */
+ 
+ /*
+@@ -2100,7 +2101,7 @@ bool ar9003_hw_bb_watchdog_check(struct
+ 	case 0x04000b09:
+ 		return true;
+ 	case 0x04000409:
+-		if (AR_SREV_9340(ah) || AR_SREV_9531(ah))
++		if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9561(ah))
+ 			return false;
+ 		else
+ 			return true;
diff --git a/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch b/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch
new file mode 100644
index 0000000000..80b781ca54
--- /dev/null
+++ b/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch
@@ -0,0 +1,27 @@
+From: Miaoqing Pan <miaoqing@codeaurora.org>
+Date: Fri, 15 Jan 2016 18:17:20 +0800
+Subject: [PATCH] ath9k: fix inconsistent use of tab and space in
+ indentation
+
+Minor changes for indenting.
+
+Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+@@ -5485,11 +5485,11 @@ unsigned int ar9003_get_paprd_scale_fact
+ 			  AR9300_PAPRD_SCALE_1);
+ 	else {
+ 		if (chan->channel >= 5700)
+-		return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
+-			  AR9300_PAPRD_SCALE_1);
++			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
++				  AR9300_PAPRD_SCALE_1);
+ 		else if (chan->channel >= 5400)
+ 			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
+-				   AR9300_PAPRD_SCALE_2);
++				  AR9300_PAPRD_SCALE_2);
+ 		else
+ 			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
+ 				  AR9300_PAPRD_SCALE_1);
diff --git a/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch b/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch
deleted file mode 100644
index ab9771e64a..0000000000
--- a/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 12 Mar 2015 17:10:50 +0100
-Subject: [PATCH] ath9k: fix tracking of enabled AP beacons
-
-sc->nbcnvifs tracks assigned beacon slots, not enabled beacons.
-Therefore, it cannot be used to decide if cur_conf->enable_beacon (bool)
-should be updated, or if beacons have been enabled already.
-With the current code (depending on the order of calls), beacons often
-do not get enabled in an AP+STA setup.
-To fix tracking of enabled beacons, convert cur_conf->enable_beacon to a
-bitmask of enabled beacon slots.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/beacon.c
-+++ b/drivers/net/wireless/ath/ath9k/beacon.c
-@@ -219,12 +219,15 @@ void ath9k_beacon_remove_slot(struct ath
- 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- 	struct ath_vif *avp = (void *)vif->drv_priv;
- 	struct ath_buf *bf = avp->av_bcbuf;
-+	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
- 
- 	ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
- 		avp->av_bslot);
- 
- 	tasklet_disable(&sc->bcon_tasklet);
- 
-+	cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
-+
- 	if (bf && bf->bf_mpdu) {
- 		struct sk_buff *skb = bf->bf_mpdu;
- 		dma_unmap_single(sc->dev, bf->bf_buf_addr,
-@@ -521,8 +524,7 @@ static bool ath9k_allow_beacon_config(st
- 	}
- 
- 	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
--		if ((vif->type != NL80211_IFTYPE_AP) ||
--		    (sc->nbcnvifs > 1)) {
-+		if (vif->type != NL80211_IFTYPE_AP) {
- 			ath_dbg(common, CONFIG,
- 				"An AP interface is already present !\n");
- 			return false;
-@@ -616,12 +618,14 @@ void ath9k_beacon_config(struct ath_soft
- 	 * enabling/disabling SWBA.
- 	 */
- 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
--		if (!bss_conf->enable_beacon &&
--		    (sc->nbcnvifs <= 1)) {
--			cur_conf->enable_beacon = false;
--		} else if (bss_conf->enable_beacon) {
--			cur_conf->enable_beacon = true;
--			ath9k_cache_beacon_config(sc, ctx, bss_conf);
-+		bool enabled = cur_conf->enable_beacon;
-+
-+		if (!bss_conf->enable_beacon) {
-+			cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
-+		} else {
-+			cur_conf->enable_beacon |= BIT(avp->av_bslot);
-+			if (!enabled)
-+				ath9k_cache_beacon_config(sc, ctx, bss_conf);
- 		}
- 	}
- 
---- a/drivers/net/wireless/ath/ath9k/common.h
-+++ b/drivers/net/wireless/ath/ath9k/common.h
-@@ -54,7 +54,7 @@ struct ath_beacon_config {
- 	u16 dtim_period;
- 	u16 bmiss_timeout;
- 	u8 dtim_count;
--	bool enable_beacon;
-+	u8 enable_beacon;
- 	bool ibss_creator;
- 	u32 nexttbtt;
- 	u32 intval;
diff --git a/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch b/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch
new file mode 100644
index 0000000000..d4088664bf
--- /dev/null
+++ b/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch
@@ -0,0 +1,65 @@
+From: Miaoqing Pan <miaoqing@codeaurora.org>
+Date: Fri, 15 Jan 2016 18:17:21 +0800
+Subject: [PATCH] ath9k: fix data bus error on ar9300 and ar9580
+
+One crash issue be found on ar9300: RTC_RC reg read leads crash, leading
+the data bus error, due to RTC_RC reg write not happen properly.
+
+Warm Reset trigger in continuous beacon stuck for one of the customer for
+other chip, noticed the MAC was stuck in RTC reset. After analysis noticed
+DMA did not complete when RTC was put in reset.
+
+So, before resetting the MAC need to make sure there are no pending DMA
+transactions because this reset does not reset all parts of the chip.
+
+The 12th and 11th bit of MAC _DMA_CFG register used to do that.
+	12 cfg_halt_ack 0x0
+		0 DMA has not yet halted
+		1 DMA has halted
+	11 cfg_halt_req 0x0
+		0 DMA logic operates normally
+		1 Request DMA logic to stop so software can reset the MAC
+
+The Bit [12] of this register indicates when the halt has taken effect or
+not. the DMA halt IS NOT recoverable; once software sets bit [11] to
+request a DMA halt, software must wait for bit [12] to be set and reset
+the MAC.
+
+So, the same thing we implemented for ar9580 chip.
+
+Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -1368,6 +1368,16 @@ static bool ath9k_hw_set_reset(struct at
+ 	if (ath9k_hw_mci_is_enabled(ah))
+ 		ar9003_mci_check_gpm_offset(ah);
+ 
++	/* DMA HALT added to resolve ar9300 and ar9580 bus error during
++	 * RTC_RC reg read
++	 */
++	if (AR_SREV_9300(ah) || AR_SREV_9580(ah)) {
++		REG_SET_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
++		ath9k_hw_wait(ah, AR_CFG, AR_CFG_HALT_ACK, AR_CFG_HALT_ACK,
++			      20 * AH_WAIT_TIMEOUT);
++		REG_CLR_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
++	}
++
+ 	REG_WRITE(ah, AR_RTC_RC, rst_flags);
+ 
+ 	REGWRITE_BUFFER_FLUSH(ah);
+--- a/drivers/net/wireless/ath/ath9k/reg.h
++++ b/drivers/net/wireless/ath/ath9k/reg.h
+@@ -34,8 +34,10 @@
+ #define AR_CFG_SWRG          0x00000010
+ #define AR_CFG_AP_ADHOC_INDICATION 0x00000020
+ #define AR_CFG_PHOK          0x00000100
+-#define AR_CFG_CLK_GATE_DIS  0x00000400
+ #define AR_CFG_EEBS          0x00000200
++#define AR_CFG_CLK_GATE_DIS  0x00000400
++#define AR_CFG_HALT_REQ	     0x00000800
++#define AR_CFG_HALT_ACK	     0x00001000
+ #define AR_CFG_PCI_MASTER_REQ_Q_THRESH         0x00060000
+ #define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S       17
+ 
diff --git a/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch b/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch
deleted file mode 100644
index d13263655e..0000000000
--- a/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Fri, 13 Mar 2015 10:49:40 +0100
-Subject: [PATCH] mac80211: minstrel_ht: fix rounding issue in MCS duration
- calculation
-
-On very high MCS bitrates, the calculated duration of rates that are
-next to each other can be very imprecise, due to the small packet size
-used as reference (1200 bytes).
-This is most visible in VHT80 nss=2 MCS8/9, for which minstrel shows the
-same throughput when the probability is also the same. This leads to a
-bad rate selection for such rates.
-
-Fix this issue by introducing an average A-MPDU size factor into the
-calculation.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -17,10 +17,11 @@
- #include "rc80211_minstrel.h"
- #include "rc80211_minstrel_ht.h"
- 
-+#define AVG_AMPDU_SIZE	16
- #define AVG_PKT_SIZE	1200
- 
- /* Number of bits for an average sized packet */
--#define MCS_NBITS (AVG_PKT_SIZE << 3)
-+#define MCS_NBITS ((AVG_PKT_SIZE * AVG_AMPDU_SIZE) << 3)
- 
- /* Number of symbols for a packet with (bps) bits per symbol */
- #define MCS_NSYMS(bps) DIV_ROUND_UP(MCS_NBITS, (bps))
-@@ -33,7 +34,8 @@
- 	)
- 
- /* Transmit duration for the raw data part of an average sized packet */
--#define MCS_DURATION(streams, sgi, bps) MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps)))
-+#define MCS_DURATION(streams, sgi, bps) \
-+	(MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps))) / AVG_AMPDU_SIZE)
- 
- #define BW_20			0
- #define BW_40			1
diff --git a/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch b/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch
new file mode 100644
index 0000000000..d9511c8d5f
--- /dev/null
+++ b/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch
@@ -0,0 +1,19 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Fri, 15 Jan 2016 15:59:45 +0100
+Subject: [PATCH] brcmfmac: add missing include
+
+linux/module.h is required for defining module parameters
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -17,6 +17,7 @@
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+ #include <linux/netdevice.h>
++#include <linux/module.h>
+ #include <brcmu_wifi.h>
+ #include <brcmu_utils.h>
+ #include "core.h"
diff --git a/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch b/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch
new file mode 100644
index 0000000000..711e019e2b
--- /dev/null
+++ b/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch
@@ -0,0 +1,118 @@
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Tue, 19 Jan 2016 12:39:24 +0100
+Subject: [PATCH] brcmfmac: fix sdio sg table alloc crash
+
+With commit 7d34b0560567 ("brcmfmac: Move all module parameters to
+one place") a bug was introduced causing a null pointer exception.
+This patch fixes the bug by initializing the sg table till after
+the settings have been initialized.
+
+Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place")
+Reported-by: Marc Zyngier <marc.zyngier@arm.com>
+Tested-by: Marc Zyngier <marc.zyngier@arm.com>
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -879,11 +879,24 @@ int brcmf_sdiod_abort(struct brcmf_sdio_
+ 	return 0;
+ }
+ 
+-static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
++void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
+ {
++	struct sdio_func *func;
++	struct mmc_host *host;
++	uint max_blocks;
+ 	uint nents;
+ 	int err;
+ 
++	func = sdiodev->func[2];
++	host = func->card->host;
++	sdiodev->sg_support = host->max_segs > 1;
++	max_blocks = min_t(uint, host->max_blk_count, 511u);
++	sdiodev->max_request_size = min_t(uint, host->max_req_size,
++					  max_blocks * func->cur_blksize);
++	sdiodev->max_segment_count = min_t(uint, host->max_segs,
++					   SG_MAX_SINGLE_ALLOC);
++	sdiodev->max_segment_size = host->max_seg_size;
++
+ 	if (!sdiodev->sg_support)
+ 		return;
+ 
+@@ -1021,9 +1034,6 @@ static void brcmf_sdiod_host_fixup(struc
+ 
+ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
+ {
+-	struct sdio_func *func;
+-	struct mmc_host *host;
+-	uint max_blocks;
+ 	int ret = 0;
+ 
+ 	sdiodev->num_funcs = 2;
+@@ -1054,26 +1064,6 @@ static int brcmf_sdiod_probe(struct brcm
+ 		goto out;
+ 	}
+ 
+-	/*
+-	 * determine host related variables after brcmf_sdiod_probe()
+-	 * as func->cur_blksize is properly set and F2 init has been
+-	 * completed successfully.
+-	 */
+-	func = sdiodev->func[2];
+-	host = func->card->host;
+-	sdiodev->sg_support = host->max_segs > 1;
+-	max_blocks = min_t(uint, host->max_blk_count, 511u);
+-	sdiodev->max_request_size = min_t(uint, host->max_req_size,
+-					  max_blocks * func->cur_blksize);
+-	sdiodev->max_segment_count = min_t(uint, host->max_segs,
+-					   SG_MAX_SINGLE_ALLOC);
+-	sdiodev->max_segment_size = host->max_seg_size;
+-
+-	/* allocate scatter-gather table. sg support
+-	 * will be disabled upon allocation failure.
+-	 */
+-	brcmf_sdiod_sgtable_alloc(sdiodev);
+-
+ 	ret = brcmf_sdiod_freezer_attach(sdiodev);
+ 	if (ret)
+ 		goto out;
+@@ -1084,7 +1074,7 @@ static int brcmf_sdiod_probe(struct brcm
+ 		ret = -ENODEV;
+ 		goto out;
+ 	}
+-	brcmf_sdiod_host_fixup(host);
++	brcmf_sdiod_host_fixup(sdiodev->func[2]->card->host);
+ out:
+ 	if (ret)
+ 		brcmf_sdiod_remove(sdiodev);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -4114,6 +4114,11 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ 		goto fail;
+ 	}
+ 
++	/* allocate scatter-gather table. sg support
++	 * will be disabled upon allocation failure.
++	 */
++	brcmf_sdiod_sgtable_alloc(bus->sdiodev);
++
+ 	/* Query the F2 block size, set roundup accordingly */
+ 	bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
+ 	bus->roundup = min(max_roundup, bus->blocksize);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -342,6 +342,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_
+ 
+ /* Issue an abort to the specified function */
+ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
++void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
+ void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
+ 			      enum brcmf_sdiod_state state);
+ #ifdef CONFIG_PM_SLEEP
diff --git a/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch b/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch
deleted file mode 100644
index 945fbce334..0000000000
--- a/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 15 Mar 2015 08:02:37 +0100
-Subject: [PATCH] ath9k: disable TPC support again (for now)
-
-TPC support has been observed to cause some tx power fluctuations on
-some devices with at least AR934x and AR938x chips.
-Disable it for now until the bugs have been found and fixed
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -424,7 +424,7 @@ static void ath9k_hw_init_defaults(struc
- 	ah->power_mode = ATH9K_PM_UNDEFINED;
- 	ah->htc_reset_init = true;
- 
--	ah->tpc_enabled = true;
-+	ah->tpc_enabled = false;
- 
- 	ah->ani_function = ATH9K_ANI_ALL;
- 	if (!AR_SREV_9300_20_OR_LATER(ah))
diff --git a/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch b/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch
new file mode 100644
index 0000000000..287d6e13bd
--- /dev/null
+++ b/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch
@@ -0,0 +1,38 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 21 Jan 2016 16:28:44 +0100
+Subject: [PATCH] ath9k_hw: ignore eeprom magic mismatch on flash based devices
+
+Many AR913x based devices (maybe others too) do not have a valid EEPROM
+magic in their calibration data partition.
+
+Fixes: 6fa658fd5ab2 ("ath9k: Simplify and fix eeprom endianness swapping")
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/eeprom.c
++++ b/drivers/net/wireless/ath/ath9k/eeprom.c
+@@ -150,18 +150,18 @@ int ath9k_hw_nvram_swap_data(struct ath_
+ 		return -EIO;
+ 	}
+ 
+-	if (magic == AR5416_EEPROM_MAGIC) {
+-		*swap_needed = false;
+-	} else if (swab16(magic) == AR5416_EEPROM_MAGIC) {
++	*swap_needed = false;
++	if (swab16(magic) == AR5416_EEPROM_MAGIC) {
+ 		if (ah->ah_flags & AH_NO_EEP_SWAP) {
+ 			ath_info(common,
+ 				 "Ignoring endianness difference in EEPROM magic bytes.\n");
+-
+-			*swap_needed = false;
+ 		} else {
+ 			*swap_needed = true;
+ 		}
+-	} else {
++	} else if (magic != AR5416_EEPROM_MAGIC) {
++		if (ath9k_hw_use_flash(ah))
++			return 0;
++
+ 		ath_err(common,
+ 			"Invalid EEPROM Magic (0x%04x).\n", magic);
+ 		return -EINVAL;
diff --git a/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch b/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch
deleted file mode 100644
index bd3050e3c2..0000000000
--- a/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Tue, 24 Feb 2015 00:28:18 +0100
-Subject: [PATCH] mac80211: don't look up stations for multicast addresses
-
-Since multicast addresses don't exist as stations, don't attempt
-to look them up in the hashtable on TX.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1161,7 +1161,7 @@ ieee80211_tx_prepare(struct ieee80211_su
- 		   tx->sdata->control_port_protocol == tx->skb->protocol) {
- 		tx->sta = sta_info_get_bss(sdata, hdr->addr1);
- 	}
--	if (!tx->sta)
-+	if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
- 		tx->sta = sta_info_get(sdata, hdr->addr1);
- 
- 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
diff --git a/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch b/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch
new file mode 100644
index 0000000000..070efa98e8
--- /dev/null
+++ b/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch
@@ -0,0 +1,55 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Fri, 22 Jan 2016 01:05:56 +0100
+Subject: [PATCH] ath9k: do not limit the number of DFS interfaces to 1
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -751,14 +751,6 @@ static const struct ieee80211_iface_comb
+ 
+ #endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */
+ 
+-static const struct ieee80211_iface_limit if_dfs_limits[] = {
+-	{ .max = 1,	.types = BIT(NL80211_IFTYPE_AP) |
+-#ifdef CPTCFG_MAC80211_MESH
+-				 BIT(NL80211_IFTYPE_MESH_POINT) |
+-#endif
+-				 BIT(NL80211_IFTYPE_ADHOC) },
+-};
+-
+ static const struct ieee80211_iface_combination if_comb[] = {
+ 	{
+ 		.limits = if_limits,
+@@ -766,6 +758,11 @@ static const struct ieee80211_iface_comb
+ 		.max_interfaces = 2048,
+ 		.num_different_channels = 1,
+ 		.beacon_int_infra_match = true,
++#ifdef CPTCFG_ATH9K_DFS_CERTIFIED
++		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
++					BIT(NL80211_CHAN_WIDTH_20) |
++					BIT(NL80211_CHAN_WIDTH_40),
++#endif
+ 	},
+ 	{
+ 		.limits = wds_limits,
+@@ -774,18 +771,6 @@ static const struct ieee80211_iface_comb
+ 		.num_different_channels = 1,
+ 		.beacon_int_infra_match = true,
+ 	},
+-#ifdef CPTCFG_ATH9K_DFS_CERTIFIED
+-	{
+-		.limits = if_dfs_limits,
+-		.n_limits = ARRAY_SIZE(if_dfs_limits),
+-		.max_interfaces = 1,
+-		.num_different_channels = 1,
+-		.beacon_int_infra_match = true,
+-		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+-					BIT(NL80211_CHAN_WIDTH_20) |
+-					BIT(NL80211_CHAN_WIDTH_40),
+-	}
+-#endif
+ };
+ 
+ #ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT
diff --git a/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch b/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch
deleted file mode 100644
index b2475b9106..0000000000
--- a/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 11:41:58 +0100
-Subject: [PATCH] mac80211: remove drop_unencrypted code
-
-This mechanism was historic, and only ever used by IBSS, which
-also doesn't need to have it as it properly manages station's
-802.1X PAE state (or, with WEP, always has a key.)
-
-Remove the mechanism to clean up the code.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/debugfs.c
-+++ b/net/mac80211/debugfs.c
-@@ -274,8 +274,6 @@ void debugfs_hw_add(struct ieee80211_loc
- #ifdef CPTCFG_MAC80211_DEBUG_COUNTERS
- 	DEBUGFS_STATS_ADD(tx_handlers_drop, local->tx_handlers_drop);
- 	DEBUGFS_STATS_ADD(tx_handlers_queued, local->tx_handlers_queued);
--	DEBUGFS_STATS_ADD(tx_handlers_drop_unencrypted,
--		local->tx_handlers_drop_unencrypted);
- 	DEBUGFS_STATS_ADD(tx_handlers_drop_fragment,
- 		local->tx_handlers_drop_fragment);
- 	DEBUGFS_STATS_ADD(tx_handlers_drop_wep,
---- a/net/mac80211/debugfs_netdev.c
-+++ b/net/mac80211/debugfs_netdev.c
-@@ -177,7 +177,6 @@ static ssize_t ieee80211_if_write_##name
- 	IEEE80211_IF_FILE_R(name)
- 
- /* common attributes */
--IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
- IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ],
- 		  HEX);
- IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ],
-@@ -562,7 +561,6 @@ IEEE80211_IF_FILE(dot11MeshAwakeWindowDu
- 
- static void add_common_files(struct ieee80211_sub_if_data *sdata)
- {
--	DEBUGFS_ADD(drop_unencrypted);
- 	DEBUGFS_ADD(rc_rateidx_mask_2ghz);
- 	DEBUGFS_ADD(rc_rateidx_mask_5ghz);
- 	DEBUGFS_ADD(rc_rateidx_mcs_mask_2ghz);
---- a/net/mac80211/ibss.c
-+++ b/net/mac80211/ibss.c
-@@ -249,8 +249,6 @@ static void __ieee80211_sta_join_ibss(st
- 	if (presp)
- 		kfree_rcu(presp, rcu_head);
- 
--	sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
--
- 	/* make a copy of the chandef, it could be modified below. */
- 	chandef = *req_chandef;
- 	chan = chandef.chan;
-@@ -1289,8 +1287,6 @@ static void ieee80211_sta_create_ibss(st
- 
- 	if (ifibss->privacy)
- 		capability |= WLAN_CAPABILITY_PRIVACY;
--	else
--		sdata->drop_unencrypted = 0;
- 
- 	__ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
- 				  &ifibss->chandef, ifibss->basic_rates,
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -842,8 +842,6 @@ struct ieee80211_sub_if_data {
- 
- 	unsigned long state;
- 
--	int drop_unencrypted;
--
- 	char name[IFNAMSIZ];
- 
- 	/* Fragment table for host-based reassembly */
-@@ -1289,7 +1287,6 @@ struct ieee80211_local {
- 	/* TX/RX handler statistics */
- 	unsigned int tx_handlers_drop;
- 	unsigned int tx_handlers_queued;
--	unsigned int tx_handlers_drop_unencrypted;
- 	unsigned int tx_handlers_drop_fragment;
- 	unsigned int tx_handlers_drop_wep;
- 	unsigned int tx_handlers_drop_not_assoc;
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1535,7 +1535,6 @@ int ieee80211_if_change_type(struct ieee
- 	}
- 
- 	/* reset some values that shouldn't be kept across type changes */
--	sdata->drop_unencrypted = 0;
- 	if (type == NL80211_IFTYPE_STATION)
- 		sdata->u.mgd.use_4addr = false;
- 
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1897,8 +1897,7 @@ static int ieee80211_drop_unencrypted(st
- 	/* Drop unencrypted frames if key is set. */
- 	if (unlikely(!ieee80211_has_protected(fc) &&
- 		     !ieee80211_is_nullfunc(fc) &&
--		     ieee80211_is_data(fc) &&
--		     (rx->key || rx->sdata->drop_unencrypted)))
-+		     ieee80211_is_data(fc) && rx->key))
- 		return -EACCES;
- 
- 	return 0;
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -594,23 +594,8 @@ ieee80211_tx_h_select_key(struct ieee802
- 	else if (!is_multicast_ether_addr(hdr->addr1) &&
- 		 (key = rcu_dereference(tx->sdata->default_unicast_key)))
- 		tx->key = key;
--	else if (info->flags & IEEE80211_TX_CTL_INJECTED)
-+	else
- 		tx->key = NULL;
--	else if (!tx->sdata->drop_unencrypted)
--		tx->key = NULL;
--	else if (tx->skb->protocol == tx->sdata->control_port_protocol)
--		tx->key = NULL;
--	else if (ieee80211_is_robust_mgmt_frame(tx->skb) &&
--		 !(ieee80211_is_action(hdr->frame_control) &&
--		   tx->sta && test_sta_flag(tx->sta, WLAN_STA_MFP)))
--		tx->key = NULL;
--	else if (ieee80211_is_mgmt(hdr->frame_control) &&
--		 !ieee80211_is_robust_mgmt_frame(tx->skb))
--		tx->key = NULL;
--	else {
--		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
--		return TX_DROP;
--	}
- 
- 	if (tx->key) {
- 		bool skip_hw = false;
diff --git a/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch b/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch
deleted file mode 100644
index 02a7fab436..0000000000
--- a/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:21 +0100
-Subject: [PATCH] mac80211: don't look up destination station twice
-
-There's no need to look up the destination station twice while
-building the 802.11 header for a given frame if the frame will
-actually be transmitted to the station we initially looked up.
-
-This happens for 4-addr VLAN interfaces and TDLS connections, which
-both directly send the frame to the station they looked up, though
-in the case of TDLS some station conditions need to be checked.
-
-To avoid that, add a variable indicating that we've looked up the
-station that the frame is going to be transmitted to, and avoid the
-lookup/flag checking if it already has been done.
-
-In the TDLS case, also move the authorized/wme_sta flag assignment
-to the correct place, i.e. only when that station is really used.
-Before this change, the new lookup should always have succeeded so
-that the potentially erroneous data would be overwritten.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1894,6 +1894,7 @@ static struct sk_buff *ieee80211_build_h
- 	bool wme_sta = false, authorized = false, tdls_auth = false;
- 	bool tdls_peer = false, tdls_setup_frame = false;
- 	bool multicast;
-+	bool have_station = false;
- 	u16 info_id = 0;
- 	struct ieee80211_chanctx_conf *chanctx_conf;
- 	struct ieee80211_sub_if_data *ap_sdata;
-@@ -1918,6 +1919,7 @@ static struct sk_buff *ieee80211_build_h
- 			hdrlen = 30;
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
-+			have_station = true;
- 		}
- 		ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data,
- 					u.ap);
-@@ -2034,9 +2036,6 @@ static struct sk_buff *ieee80211_build_h
- 		if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) {
- 			sta = sta_info_get(sdata, skb->data);
- 			if (sta) {
--				authorized = test_sta_flag(sta,
--							WLAN_STA_AUTHORIZED);
--				wme_sta = sta->sta.wme;
- 				tdls_peer = test_sta_flag(sta,
- 							  WLAN_STA_TDLS_PEER);
- 				tdls_auth = test_sta_flag(sta,
-@@ -2068,6 +2067,9 @@ static struct sk_buff *ieee80211_build_h
- 			memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
- 			memcpy(hdr.addr3, sdata->u.mgd.bssid, ETH_ALEN);
- 			hdrlen = 24;
-+			have_station = true;
-+			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
-+			wme_sta = sta->sta.wme;
- 		}  else if (sdata->u.mgd.use_4addr &&
- 			    cpu_to_be16(ethertype) != sdata->control_port_protocol) {
- 			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
-@@ -2130,7 +2132,7 @@ static struct sk_buff *ieee80211_build_h
- 	 * in AP mode)
- 	 */
- 	multicast = is_multicast_ether_addr(hdr.addr1);
--	if (!multicast) {
-+	if (!multicast && !have_station) {
- 		sta = sta_info_get(sdata, hdr.addr1);
- 		if (sta) {
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
diff --git a/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch b/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch
new file mode 100644
index 0000000000..61cafc7625
--- /dev/null
+++ b/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch
@@ -0,0 +1,27 @@
+From: Michal Kazior <michal.kazior@tieto.com>
+Date: Thu, 21 Jan 2016 14:23:07 +0100
+Subject: [PATCH] mac80211: fix txq queue related crashes
+
+The driver can access the queue simultanously
+while mac80211 tears down the interface. Without
+spinlock protection this could lead to corrupting
+sk_buff_head and subsequently to an invalid
+pointer dereference.
+
+Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation")
+Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
+---
+
+--- a/net/mac80211/iface.c
++++ b/net/mac80211/iface.c
+@@ -977,7 +977,10 @@ static void ieee80211_do_stop(struct iee
+ 	if (sdata->vif.txq) {
+ 		struct txq_info *txqi = to_txq_info(sdata->vif.txq);
+ 
++		spin_lock_bh(&txqi->queue.lock);
+ 		ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
++		spin_unlock_bh(&txqi->queue.lock);
++
+ 		atomic_set(&sdata->txqs_len[txqi->txq.ac], 0);
+ 	}
+ 
diff --git a/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch b/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch
deleted file mode 100644
index 41253519b3..0000000000
--- a/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:22 +0100
-Subject: [PATCH] mac80211: drop 4-addr VLAN frames earlier if not
- connected
-
-If there's no station on the 4-addr VLAN interface, then frames
-cannot be transmitted. Drop such frames earlier, before setting
-up all the information for them.
-
-We should keep the old check though since that code might be used
-for other internally-generated frames.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1920,6 +1920,9 @@ static struct sk_buff *ieee80211_build_h
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
- 			have_station = true;
-+		} else if (sdata->wdev.use_4addr) {
-+			ret = -ENOLINK;
-+			goto free;
- 		}
- 		ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data,
- 					u.ap);
diff --git a/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch b/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch
new file mode 100644
index 0000000000..844d43bfc7
--- /dev/null
+++ b/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch
@@ -0,0 +1,57 @@
+From: Michal Kazior <michal.kazior@tieto.com>
+Date: Mon, 25 Jan 2016 14:43:24 +0100
+Subject: [PATCH] mac80211: fix unnecessary frame drops in mesh fwding
+
+The ieee80211_queue_stopped() expects hw queue
+number but it was given raw WMM AC number instead.
+
+This could cause frame drops and problems with
+traffic in some cases - most notably if driver
+doesn't map AC numbers to queue numbers 1:1 and
+uses ieee80211_stop_queues() and
+ieee80211_wake_queue() only without ever calling
+ieee80211_wake_queues().
+
+On ath10k it was possible to hit this problem in
+the following case:
+
+  1. wlan0 uses queue 0
+     (ath10k maps queues per vif)
+  2. offchannel uses queue 15
+  3. queues 1-14 are unused
+  4. ieee80211_stop_queues()
+  5. ieee80211_wake_queue(q=0)
+  6. ieee80211_wake_queue(q=15)
+     (other queues are not woken up because both
+      driver and mac80211 know other queues are
+      unused)
+  7. ieee80211_rx_h_mesh_fwding()
+  8. ieee80211_select_queue_80211() returns 2
+  9. ieee80211_queue_stopped(q=2) returns true
+ 10. frame is dropped (oops!)
+
+Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping")
+Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
+---
+
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -2235,7 +2235,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
+ 	struct ieee80211_local *local = rx->local;
+ 	struct ieee80211_sub_if_data *sdata = rx->sdata;
+ 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+-	u16 q, hdrlen;
++	u16 ac, q, hdrlen;
+ 
+ 	hdr = (struct ieee80211_hdr *) skb->data;
+ 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+@@ -2304,7 +2304,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
+ 	    ether_addr_equal(sdata->vif.addr, hdr->addr3))
+ 		return RX_CONTINUE;
+ 
+-	q = ieee80211_select_queue_80211(sdata, skb, hdr);
++	ac = ieee80211_select_queue_80211(sdata, skb, hdr);
++	q = sdata->vif.hw_queue[ac];
+ 	if (ieee80211_queue_stopped(&local->hw, q)) {
+ 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion);
+ 		return RX_DROP_MONITOR;
diff --git a/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch b/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch
new file mode 100644
index 0000000000..5b3efbdc5a
--- /dev/null
+++ b/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch
@@ -0,0 +1,103 @@
+From: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com>
+Date: Tue, 12 Jan 2016 14:30:19 +0530
+Subject: [PATCH] mac80211: Requeue work after scan complete for all VIF
+ types.
+
+During a sw scan ieee80211_iface_work ignores work items for all vifs.
+However after the scan complete work is requeued only for STA, ADHOC
+and MESH iftypes.
+
+This occasionally results in event processing getting delayed/not
+processed for iftype AP when it coexists with a STA. This can result
+in data halt and eventually disconnection on the AP interface.
+
+Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com>
+Cc: linux-wireless@vger.kernel.org
+Cc: johannes@sipsolutions.net
+---
+
+--- a/net/mac80211/ibss.c
++++ b/net/mac80211/ibss.c
+@@ -1731,7 +1731,6 @@ void ieee80211_ibss_notify_scan_complete
+ 		if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
+ 			continue;
+ 		sdata->u.ibss.last_scan_completed = jiffies;
+-		ieee80211_queue_work(&local->hw, &sdata->work);
+ 	}
+ 	mutex_unlock(&local->iflist_mtx);
+ }
+--- a/net/mac80211/mesh.c
++++ b/net/mac80211/mesh.c
+@@ -1369,17 +1369,6 @@ out:
+ 	sdata_unlock(sdata);
+ }
+ 
+-void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
+-{
+-	struct ieee80211_sub_if_data *sdata;
+-
+-	rcu_read_lock();
+-	list_for_each_entry_rcu(sdata, &local->interfaces, list)
+-		if (ieee80211_vif_is_mesh(&sdata->vif) &&
+-		    ieee80211_sdata_running(sdata))
+-			ieee80211_queue_work(&local->hw, &sdata->work);
+-	rcu_read_unlock();
+-}
+ 
+ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
+ {
+--- a/net/mac80211/mesh.h
++++ b/net/mac80211/mesh.h
+@@ -362,14 +362,10 @@ static inline bool mesh_path_sel_is_hwmp
+ 	return sdata->u.mesh.mesh_pp_id == IEEE80211_PATH_PROTOCOL_HWMP;
+ }
+ 
+-void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local);
+-
+ void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata);
+ void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata);
+ void ieee80211s_stop(void);
+ #else
+-static inline void
+-ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {}
+ static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata)
+ { return false; }
+ static inline void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata)
+--- a/net/mac80211/mlme.c
++++ b/net/mac80211/mlme.c
+@@ -3978,8 +3978,6 @@ static void ieee80211_restart_sta_timer(
+ 		if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
+ 			ieee80211_queue_work(&sdata->local->hw,
+ 					     &sdata->u.mgd.monitor_work);
+-		/* and do all the other regular work too */
+-		ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+ 	}
+ }
+ 
+--- a/net/mac80211/scan.c
++++ b/net/mac80211/scan.c
+@@ -314,6 +314,7 @@ static void __ieee80211_scan_completed(s
+ 	bool was_scanning = local->scanning;
+ 	struct cfg80211_scan_request *scan_req;
+ 	struct ieee80211_sub_if_data *scan_sdata;
++	struct ieee80211_sub_if_data *sdata;
+ 
+ 	lockdep_assert_held(&local->mtx);
+ 
+@@ -373,7 +374,15 @@ static void __ieee80211_scan_completed(s
+ 
+ 	ieee80211_mlme_notify_scan_completed(local);
+ 	ieee80211_ibss_notify_scan_completed(local);
+-	ieee80211_mesh_notify_scan_completed(local);
++
++	/* Requeue all the work that might have been ignored while
++	 * the scan was in progress
++	 */
++	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
++		if (ieee80211_sdata_running(sdata))
++			ieee80211_queue_work(&sdata->local->hw, &sdata->work);
++	}
++
+ 	if (was_scanning)
+ 		ieee80211_start_next_roc(local);
+ }
diff --git a/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch b/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch
deleted file mode 100644
index 9105a64489..0000000000
--- a/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:23 +0100
-Subject: [PATCH] mac80211: mesh: avoid pointless station lookup
-
-In ieee80211_build_hdr(), the station is looked up to build the
-header correctly (QoS field) and to check for authorization. For
-mesh, authorization isn't checked here, and QoS capability is
-mandatory, so the station lookup can be avoided.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -2130,12 +2130,14 @@ static struct sk_buff *ieee80211_build_h
- 	}
- 
- 	/*
--	 * There's no need to try to look up the destination
--	 * if it is a multicast address (which can only happen
--	 * in AP mode)
-+	 * There's no need to try to look up the destination station
-+	 * if it is a multicast address. In mesh, there's no need to
-+	 * look up the station at all as it always must be QoS capable
-+	 * and mesh mode checks authorization later.
- 	 */
- 	multicast = is_multicast_ether_addr(hdr.addr1);
--	if (!multicast && !have_station) {
-+	if (!multicast && !have_station &&
-+	    !ieee80211_vif_is_mesh(&sdata->vif)) {
- 		sta = sta_info_get(sdata, hdr.addr1);
- 		if (sta) {
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
diff --git a/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch b/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch
deleted file mode 100644
index d143025f0f..0000000000
--- a/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch
+++ /dev/null
@@ -1,267 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 14:18:27 +0100
-Subject: [PATCH] mac80211: avoid duplicate TX path station lookup
-
-Instead of looking up the destination station twice in the TX path
-(first to build the header, and then for control processing), save
-it when building the header and use it later in the TX path.
-
-To avoid having to look up the station in the many callers, allow
-those to pass %NULL which keeps the existing lookup.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -3565,7 +3565,7 @@ static int ieee80211_probe_client(struct
- 		nullfunc->qos_ctrl = cpu_to_le16(7);
- 
- 	local_bh_disable();
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, sta, skb);
- 	local_bh_enable();
- 	rcu_read_unlock();
- 
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -1775,7 +1775,8 @@ void mac80211_ev_michael_mic_failure(str
- 				     gfp_t gfp);
- void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
- 			       bool bss_notify);
--void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
-+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
-+		    struct sta_info *sta, struct sk_buff *skb);
- 
- void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
- 				 struct sk_buff *skb, int tid,
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -1279,7 +1279,7 @@ static void ieee80211_send_null_response
- 	}
- 
- 	info->band = chanctx_conf->def.chan->band;
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, sta, skb);
- 	rcu_read_unlock();
- }
- 
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1110,11 +1110,13 @@ static bool ieee80211_tx_prep_agg(struct
- 
- /*
-  * initialises @tx
-+ * pass %NULL for the station if unknown, a valid pointer if known
-+ * or an ERR_PTR() if the station is known not to exist
-  */
- static ieee80211_tx_result
- ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata,
- 		     struct ieee80211_tx_data *tx,
--		     struct sk_buff *skb)
-+		     struct sta_info *sta, struct sk_buff *skb)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_hdr *hdr;
-@@ -1137,17 +1139,22 @@ ieee80211_tx_prepare(struct ieee80211_su
- 
- 	hdr = (struct ieee80211_hdr *) skb->data;
- 
--	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
--		tx->sta = rcu_dereference(sdata->u.vlan.sta);
--		if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr)
--			return TX_DROP;
--	} else if (info->flags & (IEEE80211_TX_CTL_INJECTED |
--				  IEEE80211_TX_INTFL_NL80211_FRAME_TX) ||
--		   tx->sdata->control_port_protocol == tx->skb->protocol) {
--		tx->sta = sta_info_get_bss(sdata, hdr->addr1);
-+	if (likely(sta)) {
-+		if (!IS_ERR(sta))
-+			tx->sta = sta;
-+	} else {
-+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
-+			tx->sta = rcu_dereference(sdata->u.vlan.sta);
-+			if (!tx->sta && sdata->wdev.use_4addr)
-+				return TX_DROP;
-+		} else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX |
-+					  IEEE80211_TX_CTL_INJECTED) ||
-+			   tx->sdata->control_port_protocol == tx->skb->protocol) {
-+			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
-+		}
-+		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
-+			tx->sta = sta_info_get(sdata, hdr->addr1);
- 	}
--	if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
--		tx->sta = sta_info_get(sdata, hdr->addr1);
- 
- 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
- 	    !ieee80211_is_qos_nullfunc(hdr->frame_control) &&
-@@ -1485,7 +1492,7 @@ bool ieee80211_tx_prepare_skb(struct iee
- 	struct ieee80211_tx_data tx;
- 	struct sk_buff *skb2;
- 
--	if (ieee80211_tx_prepare(sdata, &tx, skb) == TX_DROP)
-+	if (ieee80211_tx_prepare(sdata, &tx, NULL, skb) == TX_DROP)
- 		return false;
- 
- 	info->band = band;
-@@ -1518,7 +1525,8 @@ EXPORT_SYMBOL(ieee80211_tx_prepare_skb);
-  * Returns false if the frame couldn't be transmitted but was queued instead.
-  */
- static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata,
--			 struct sk_buff *skb, bool txpending)
-+			 struct sta_info *sta, struct sk_buff *skb,
-+			 bool txpending)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_tx_data tx;
-@@ -1534,7 +1542,7 @@ static bool ieee80211_tx(struct ieee8021
- 
- 	/* initialises tx */
- 	led_len = skb->len;
--	res_prepare = ieee80211_tx_prepare(sdata, &tx, skb);
-+	res_prepare = ieee80211_tx_prepare(sdata, &tx, sta, skb);
- 
- 	if (unlikely(res_prepare == TX_DROP)) {
- 		ieee80211_free_txskb(&local->hw, skb);
-@@ -1590,7 +1598,8 @@ static int ieee80211_skb_resize(struct i
- 	return 0;
- }
- 
--void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
-+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
-+		    struct sta_info *sta, struct sk_buff *skb)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-@@ -1625,7 +1634,7 @@ void ieee80211_xmit(struct ieee80211_sub
- 	}
- 
- 	ieee80211_set_qos_hdr(sdata, skb);
--	ieee80211_tx(sdata, skb, false);
-+	ieee80211_tx(sdata, sta, skb, false);
- }
- 
- static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb)
-@@ -1846,7 +1855,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
- 		goto fail_rcu;
- 
- 	info->band = chandef->chan->band;
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, NULL, skb);
- 	rcu_read_unlock();
- 
- 	return NETDEV_TX_OK;
-@@ -1877,7 +1886,8 @@ fail:
-  * Returns: the (possibly reallocated) skb or an ERR_PTR() code
-  */
- static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
--					   struct sk_buff *skb, u32 info_flags)
-+					   struct sk_buff *skb, u32 info_flags,
-+					   struct sta_info **sta_out)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_tx_info *info;
-@@ -1920,6 +1930,7 @@ static struct sk_buff *ieee80211_build_h
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
- 			have_station = true;
-+			*sta_out = sta;
- 		} else if (sdata->wdev.use_4addr) {
- 			ret = -ENOLINK;
- 			goto free;
-@@ -2073,6 +2084,7 @@ static struct sk_buff *ieee80211_build_h
- 			have_station = true;
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
-+			*sta_out = sta;
- 		}  else if (sdata->u.mgd.use_4addr &&
- 			    cpu_to_be16(ethertype) != sdata->control_port_protocol) {
- 			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
-@@ -2136,13 +2148,18 @@ static struct sk_buff *ieee80211_build_h
- 	 * and mesh mode checks authorization later.
- 	 */
- 	multicast = is_multicast_ether_addr(hdr.addr1);
--	if (!multicast && !have_station &&
--	    !ieee80211_vif_is_mesh(&sdata->vif)) {
--		sta = sta_info_get(sdata, hdr.addr1);
-+	if (multicast) {
-+		*sta_out = ERR_PTR(-ENOENT);
-+	} else if (!have_station && !ieee80211_vif_is_mesh(&sdata->vif)) {
-+		if (sdata->control_port_protocol == skb->protocol)
-+			sta = sta_info_get_bss(sdata, hdr.addr1);
-+		else
-+			sta = sta_info_get(sdata, hdr.addr1);
- 		if (sta) {
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
- 		}
-+		*sta_out = sta ?: ERR_PTR(-ENOENT);
- 	}
- 
- 	/* For mesh, the use of the QoS header is mandatory */
-@@ -2320,6 +2337,7 @@ void __ieee80211_subif_start_xmit(struct
- 				  u32 info_flags)
- {
- 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-+	struct sta_info *sta = NULL;
- 
- 	if (unlikely(skb->len < ETH_HLEN)) {
- 		kfree_skb(skb);
-@@ -2328,7 +2346,7 @@ void __ieee80211_subif_start_xmit(struct
- 
- 	rcu_read_lock();
- 
--	skb = ieee80211_build_hdr(sdata, skb, info_flags);
-+	skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta);
- 	if (IS_ERR(skb))
- 		goto out;
- 
-@@ -2336,7 +2354,7 @@ void __ieee80211_subif_start_xmit(struct
- 	dev->stats.tx_bytes += skb->len;
- 	dev->trans_start = jiffies;
- 
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, sta, skb);
-  out:
- 	rcu_read_unlock();
- }
-@@ -2364,10 +2382,11 @@ ieee80211_build_data_template(struct iee
- 		.local = sdata->local,
- 		.sdata = sdata,
- 	};
-+	struct sta_info *sta_ignore;
- 
- 	rcu_read_lock();
- 
--	skb = ieee80211_build_hdr(sdata, skb, info_flags);
-+	skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta_ignore);
- 	if (IS_ERR(skb))
- 		goto out;
- 
-@@ -2425,7 +2444,7 @@ static bool ieee80211_tx_pending_skb(str
- 			return true;
- 		}
- 		info->band = chanctx_conf->def.chan->band;
--		result = ieee80211_tx(sdata, skb, true);
-+		result = ieee80211_tx(sdata, NULL, skb, true);
- 	} else {
- 		struct sk_buff_head skbs;
- 
-@@ -3163,7 +3182,7 @@ ieee80211_get_buffered_bc(struct ieee802
- 
- 		if (sdata->vif.type == NL80211_IFTYPE_AP)
- 			sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
--		if (!ieee80211_tx_prepare(sdata, &tx, skb))
-+		if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb))
- 			break;
- 		dev_kfree_skb_any(skb);
- 	}
-@@ -3295,6 +3314,6 @@ void __ieee80211_tx_skb_tid_band(struct
- 	 */
- 	local_bh_disable();
- 	IEEE80211_SKB_CB(skb)->band = band;
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, NULL, skb);
- 	local_bh_enable();
- }
diff --git a/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch b/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch
new file mode 100644
index 0000000000..52fecb96b0
--- /dev/null
+++ b/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch
@@ -0,0 +1,57 @@
+From: Sara Sharon <sara.sharon@intel.com>
+Date: Mon, 25 Jan 2016 15:46:35 +0200
+Subject: [PATCH] mac80211: fix ibss scan parameters
+
+When joining IBSS a full scan should be initiated in order to search
+for existing cell, unless the fixed_channel parameter was set.
+A default channel to create the IBSS on if no cell was found is
+provided as well.
+However - a scan is initiated only on the default channel provided
+regardless of whether ifibss->fixed_channel is set or not, with the
+obvious result of the cell not joining existing IBSS cell that is
+on another channel.
+
+Fixes: 76bed0f43b27 ("mac80211: IBSS fix scan request")
+Signed-off-by: Sara Sharon <sara.sharon@intel.com>
+Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
+---
+
+--- a/net/mac80211/ibss.c
++++ b/net/mac80211/ibss.c
+@@ -7,6 +7,7 @@
+  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
+  * Copyright 2009, Johannes Berg <johannes@sipsolutions.net>
+  * Copyright 2013-2014  Intel Mobile Communications GmbH
++ * Copyright(c) 2016 Intel Deutschland GmbH
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+@@ -1483,14 +1484,21 @@ static void ieee80211_sta_find_ibss(stru
+ 
+ 		sdata_info(sdata, "Trigger new scan to find an IBSS to join\n");
+ 
+-		num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy,
+-							 &ifibss->chandef,
+-							 channels,
+-							 ARRAY_SIZE(channels));
+ 		scan_width = cfg80211_chandef_to_scan_width(&ifibss->chandef);
+-		ieee80211_request_ibss_scan(sdata, ifibss->ssid,
+-					    ifibss->ssid_len, channels, num,
+-					    scan_width);
++
++		if (ifibss->fixed_channel) {
++			num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy,
++								 &ifibss->chandef,
++								 channels,
++								 ARRAY_SIZE(channels));
++			ieee80211_request_ibss_scan(sdata, ifibss->ssid,
++						    ifibss->ssid_len, channels,
++						    num, scan_width);
++		} else {
++			ieee80211_request_ibss_scan(sdata, ifibss->ssid,
++						    ifibss->ssid_len, NULL,
++						    0, scan_width);
++		}
+ 	} else {
+ 		int interval = IEEE80211_SCAN_INTERVAL;
+ 
diff --git a/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch b/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch
deleted file mode 100644
index 77a82c25c6..0000000000
--- a/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: John Linville <linville@tuxdriver.com>
-Date: Tue, 31 Mar 2015 10:49:14 -0400
-Subject: [PATCH] mac80211: reduce log spam from ieee80211_handle_pwr_constr
-
-This changes a couple of messages from sdata_info to sdata_dbg.
-This should reduce some log spam, as reported here:
-
-	https://bugzilla.redhat.com/show_bug.cgi?id=1206468
-
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/mlme.c
-+++ b/net/mac80211/mlme.c
-@@ -1347,15 +1347,15 @@ static u32 ieee80211_handle_pwr_constr(s
- 	 */
- 	if (has_80211h_pwr &&
- 	    (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
--		sdata_info(sdata,
--			   "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
--			   pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
--			   sdata->u.mgd.bssid);
-+		sdata_dbg(sdata,
-+			  "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
-+			  pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
-+			  sdata->u.mgd.bssid);
- 		new_ap_level = pwr_level_80211h;
- 	} else {  /* has_cisco_pwr is always true here. */
--		sdata_info(sdata,
--			   "Limiting TX power to %d dBm as advertised by %pM\n",
--			   pwr_level_cisco, sdata->u.mgd.bssid);
-+		sdata_dbg(sdata,
-+			  "Limiting TX power to %d dBm as advertised by %pM\n",
-+			  pwr_level_cisco, sdata->u.mgd.bssid);
- 		new_ap_level = pwr_level_cisco;
- 	}
- 
diff --git a/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch b/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch
new file mode 100644
index 0000000000..e78df36600
--- /dev/null
+++ b/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch
@@ -0,0 +1,50 @@
+From: Chris Bainbridge <chris.bainbridge@gmail.com>
+Date: Wed, 27 Jan 2016 15:46:18 +0000
+Subject: [PATCH] net/mac80211/agg-rx.c: fix use of uninitialised values
+
+Use kzalloc instead of kmalloc for struct tid_ampdu_rx. Fixes:
+
+[    7.976605] UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29
+[    7.976608] load of value 2 is not a valid value for type '_Bool'
+[    7.976611] CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265
+[    7.976613] Hardware name: Apple Inc. MacBookPro10,2/Mac-AFD8A9D944EA4843, BIOS MBP102.88Z.0106.B0A.1509130955 09/13/2015
+[    7.976616] Workqueue: phy0 rt2x00usb_work_rxdone
+[    7.976619]  0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007
+[    7.976622]  ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500
+[    7.976626]  ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032
+[    7.976629] Call Trace:
+[    7.976633]  [<ffffffff8181d866>] dump_stack+0x45/0x5f
+[    7.976637]  [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40
+[    7.976642]  [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70
+[    7.976646]  [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730
+[    7.976650]  [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00
+[    7.976654]  [<ffffffff81cb27ce>] ? usb_hcd_map_urb_for_dma+0x65e/0x960
+[    7.976659]  [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750
+[    7.976663]  [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990
+[    7.976667]  [<ffffffff81c5fb85>] rt2x00lib_rxdone+0x305/0xbd0
+[    7.976670]  [<ffffffff811ac23f>] ? dequeue_task_fair+0x64f/0x1de0
+[    7.976674]  [<ffffffff811a1516>] ? sched_clock_cpu+0xe6/0x150
+[    7.976678]  [<ffffffff81c6c45c>] rt2x00usb_work_rxdone+0x7c/0x140
+[    7.976682]  [<ffffffff8117aef6>] process_one_work+0x226/0x860
+[    7.976686]  [<ffffffff8117b58c>] worker_thread+0x5c/0x680
+[    7.976690]  [<ffffffff8117b530>] ? process_one_work+0x860/0x860
+[    7.976693]  [<ffffffff81184f86>] kthread+0xf6/0x150
+[    7.976697]  [<ffffffff81184e90>] ? kthread_worker_fn+0x310/0x310
+[    7.976700]  [<ffffffff822a94df>] ret_from_fork+0x3f/0x70
+[    7.976703]  [<ffffffff81184e90>] ? kthread_worker_fn+0x310/0x310
+
+Link: https://lkml.org/lkml/2016/1/26/230
+Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
+---
+
+--- a/net/mac80211/agg-rx.c
++++ b/net/mac80211/agg-rx.c
+@@ -327,7 +327,7 @@ void __ieee80211_start_rx_ba_session(str
+ 	}
+ 
+ 	/* prepare A-MPDU MLME for Rx aggregation */
+-	tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL);
++	tid_agg_rx = kzalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL);
+ 	if (!tid_agg_rx)
+ 		goto end;
+ 
diff --git a/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch b/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch
deleted file mode 100644
index e005fe73d2..0000000000
--- a/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:41 +0100
-Subject: [PATCH] brcmfmac: Fix race condition in msgbuf ioctl processing.
-
-Msgbuf is using a wait_event_timeout to wait for the response on
-an ioctl. The wakeup routine uses waitqueue_active to see if
-wait_event_timeout has been called. There is a chance that the
-response arrives before wait_event_timeout is called, this
-will result in situation that wait_event_timeout never gets
-woken again and assumed result will be a timeout. This patch
-removes that errornous situation by always setting the
-ctl_completed var before checking for queue active.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -481,10 +481,9 @@ static int brcmf_msgbuf_ioctl_resp_wait(
- 
- static void brcmf_msgbuf_ioctl_resp_wake(struct brcmf_msgbuf *msgbuf)
- {
--	if (waitqueue_active(&msgbuf->ioctl_resp_wait)) {
--		msgbuf->ctl_completed = true;
-+	msgbuf->ctl_completed = true;
-+	if (waitqueue_active(&msgbuf->ioctl_resp_wait))
- 		wake_up(&msgbuf->ioctl_resp_wait);
--	}
- }
- 
- 
diff --git a/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch b/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch
new file mode 100644
index 0000000000..5bf53b918c
--- /dev/null
+++ b/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch
@@ -0,0 +1,45 @@
+From: Konstantin Khlebnikov <koct9i@gmail.com>
+Date: Fri, 29 Jan 2016 11:35:12 +0300
+Subject: [PATCH] mac80211: minstrel_ht: fix out-of-bound in
+ minstrel_ht_set_best_prob_rate
+
+Patch fixes this splat
+
+BUG: KASAN: slab-out-of-bounds in minstrel_ht_update_stats.isra.7+0x6e1/0x9e0
+[mac80211] at addr ffff8800cee640f4 Read of size 4 by task swapper/3/0
+
+Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
+Link: http://lkml.kernel.org/r/CALYGNiNyJhSaVnE35qS6UCGaSb2Dx1_i5HcRavuOX14oTz2P+w@mail.gmail.com
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -414,15 +414,16 @@ minstrel_ht_set_best_prob_rate(struct mi
+ 	    (max_tp_group != MINSTREL_CCK_GROUP))
+ 		return;
+ 
++	max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES;
++	max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES;
++	max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma;
++
+ 	if (mrs->prob_ewma > MINSTREL_FRAC(75, 100)) {
+ 		cur_tp_avg = minstrel_ht_get_tp_avg(mi, cur_group, cur_idx,
+ 						    mrs->prob_ewma);
+ 		if (cur_tp_avg > tmp_tp_avg)
+ 			mi->max_prob_rate = index;
+ 
+-		max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES;
+-		max_gpr_idx = mg->max_group_prob_rate %	MCS_GROUP_RATES;
+-		max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma;
+ 		max_gpr_tp_avg = minstrel_ht_get_tp_avg(mi, max_gpr_group,
+ 							max_gpr_idx,
+ 							max_gpr_prob);
+@@ -431,7 +432,7 @@ minstrel_ht_set_best_prob_rate(struct mi
+ 	} else {
+ 		if (mrs->prob_ewma > tmp_prob)
+ 			mi->max_prob_rate = index;
+-		if (mrs->prob_ewma > mg->rates[mg->max_group_prob_rate].prob_ewma)
++		if (mrs->prob_ewma > max_gpr_prob)
+ 			mg->max_group_prob_rate = index;
+ 	}
+ }
diff --git a/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch b/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch
deleted file mode 100644
index c2cd1c5c68..0000000000
--- a/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:23 +0100
-Subject: [PATCH] brcmfmac: Update msgbuf commonring size for improved
- throughput.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
-@@ -17,11 +17,11 @@
- 
- #ifdef CPTCFG_BRCMFMAC_PROTO_MSGBUF
- 
--#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM	20
--#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM	256
--#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM	20
-+#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM	64
-+#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM	512
-+#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM	64
- #define BRCMF_D2H_MSGRING_TX_COMPLETE_MAX_ITEM		1024
--#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM		256
-+#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM		512
- #define BRCMF_H2D_TXFLOWRING_MAX_ITEM			512
- 
- #define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_ITEMSIZE	40
diff --git a/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch b/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch
new file mode 100644
index 0000000000..655dc4bfa9
--- /dev/null
+++ b/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch
@@ -0,0 +1,35 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Tue, 2 Feb 2016 14:39:08 +0100
+Subject: [PATCH] mac80211: move A-MSDU skb_linearize call to
+ ieee80211_amsdu_to_8023s
+
+Prepararation for zero-copy A-MSDU support with page fragment SKBs
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -2203,9 +2203,6 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx
+ 	skb->dev = dev;
+ 	__skb_queue_head_init(&frame_list);
+ 
+-	if (skb_linearize(skb))
+-		return RX_DROP_UNUSABLE;
+-
+ 	ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
+ 				 rx->sdata->vif.type,
+ 				 rx->local->hw.extra_tx_headroom, true);
+--- a/net/wireless/util.c
++++ b/net/wireless/util.c
+@@ -657,6 +657,9 @@ void ieee80211_amsdu_to_8023s(struct sk_
+ 	int remaining, err;
+ 	u8 dst[ETH_ALEN], src[ETH_ALEN];
+ 
++	if (skb_linearize(skb))
++		goto out;
++
+ 	if (has_80211_header) {
+ 		err = ieee80211_data_to_8023(skb, addr, iftype);
+ 		if (err)
diff --git a/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch b/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch
deleted file mode 100644
index 6af69ebd2a..0000000000
--- a/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:46 +0100
-Subject: [PATCH] ath9k_htc: add new WMI_REG_RMW_CMDID command
-
-Since usb bus add extra delay on each request, a command
-with read + write requests is too expensive. We can dramtically
-reduce usb load by moving this command to firmware.
-
-In my tests, this patch will reduce channel scan time
-for about 5-10 seconds.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath.h
-+++ b/drivers/net/wireless/ath/ath.h
-@@ -131,6 +131,9 @@ struct ath_ops {
- 	void (*enable_write_buffer)(void *);
- 	void (*write_flush) (void *);
- 	u32 (*rmw)(void *, u32 reg_offset, u32 set, u32 clr);
-+	void (*enable_rmw_buffer)(void *);
-+	void (*rmw_flush) (void *);
-+
- };
- 
- struct ath_common;
---- a/drivers/net/wireless/ath/ath9k/htc.h
-+++ b/drivers/net/wireless/ath/ath9k/htc.h
-@@ -444,6 +444,10 @@ static inline void ath9k_htc_stop_btcoex
- #define OP_BT_SCAN                 BIT(4)
- #define OP_TSF_RESET               BIT(6)
- 
-+enum htc_op_flags {
-+	HTC_FWFLAG_NO_RMW,
-+};
-+
- struct ath9k_htc_priv {
- 	struct device *dev;
- 	struct ieee80211_hw *hw;
-@@ -482,6 +486,7 @@ struct ath9k_htc_priv {
- 	bool reconfig_beacon;
- 	unsigned int rxfilter;
- 	unsigned long op_flags;
-+	unsigned long fw_flags;
- 
- 	struct ath9k_hw_cal_data caldata;
- 	struct ath_spec_scan_priv spec_priv;
---- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
-+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
-@@ -376,17 +376,139 @@ static void ath9k_regwrite_flush(void *h
- 	mutex_unlock(&priv->wmi->multi_write_mutex);
- }
- 
--static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
-+static void ath9k_reg_rmw_buffer(void *hw_priv,
-+				 u32 reg_offset, u32 set, u32 clr)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+	u32 rsp_status;
-+	int r;
-+
-+	mutex_lock(&priv->wmi->multi_rmw_mutex);
-+
-+	/* Store the register/value */
-+	priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].reg =
-+		cpu_to_be32(reg_offset);
-+	priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].set =
-+		cpu_to_be32(set);
-+	priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].clr =
-+		cpu_to_be32(clr);
-+
-+	priv->wmi->multi_rmw_idx++;
-+
-+	/* If the buffer is full, send it out. */
-+	if (priv->wmi->multi_rmw_idx == MAX_RMW_CMD_NUMBER) {
-+		r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+			  (u8 *) &priv->wmi->multi_rmw,
-+			  sizeof(struct register_write) * priv->wmi->multi_rmw_idx,
-+			  (u8 *) &rsp_status, sizeof(rsp_status),
-+			  100);
-+		if (unlikely(r)) {
-+			ath_dbg(common, WMI,
-+				"REGISTER RMW FAILED, multi len: %d\n",
-+				priv->wmi->multi_rmw_idx);
-+		}
-+		priv->wmi->multi_rmw_idx = 0;
-+	}
-+
-+	mutex_unlock(&priv->wmi->multi_rmw_mutex);
-+}
-+
-+static void ath9k_reg_rmw_flush(void *hw_priv)
- {
--	u32 val;
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+	u32 rsp_status;
-+	int r;
-+
-+	if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags))
-+		return;
-+
-+	atomic_dec(&priv->wmi->m_rmw_cnt);
-+
-+	mutex_lock(&priv->wmi->multi_rmw_mutex);
-+
-+	if (priv->wmi->multi_rmw_idx) {
-+		r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+			  (u8 *) &priv->wmi->multi_rmw,
-+			  sizeof(struct register_rmw) * priv->wmi->multi_rmw_idx,
-+			  (u8 *) &rsp_status, sizeof(rsp_status),
-+			  100);
-+		if (unlikely(r)) {
-+			ath_dbg(common, WMI,
-+				"REGISTER RMW FAILED, multi len: %d\n",
-+				priv->wmi->multi_rmw_idx);
-+		}
-+		priv->wmi->multi_rmw_idx = 0;
-+	}
- 
--	val = ath9k_regread(hw_priv, reg_offset);
--	val &= ~clr;
--	val |= set;
--	ath9k_regwrite(hw_priv, val, reg_offset);
-+	mutex_unlock(&priv->wmi->multi_rmw_mutex);
-+}
-+
-+static void ath9k_enable_rmw_buffer(void *hw_priv)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+
-+	if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags))
-+		return;
-+
-+	atomic_inc(&priv->wmi->m_rmw_cnt);
-+}
-+
-+static u32 ath9k_reg_rmw_single(void *hw_priv,
-+				 u32 reg_offset, u32 set, u32 clr)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+	struct register_rmw buf, buf_ret;
-+	int ret;
-+	u32 val = 0;
-+
-+	buf.reg = cpu_to_be32(reg_offset);
-+	buf.set = cpu_to_be32(set);
-+	buf.clr = cpu_to_be32(clr);
-+
-+	ret = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+			  (u8 *) &buf, sizeof(buf),
-+			  (u8 *) &buf_ret, sizeof(buf_ret),
-+			  100);
-+	if (unlikely(ret)) {
-+		ath_dbg(common, WMI, "REGISTER RMW FAILED:(0x%04x, %d)\n",
-+			reg_offset, ret);
-+	}
- 	return val;
- }
- 
-+static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+
-+	if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags)) {
-+		u32 val;
-+
-+		val = REG_READ(ah, reg_offset);
-+		val &= ~clr;
-+		val |= set;
-+		REG_WRITE(ah, reg_offset, val);
-+
-+		return 0;
-+	}
-+
-+	if (atomic_read(&priv->wmi->m_rmw_cnt))
-+		ath9k_reg_rmw_buffer(hw_priv, reg_offset, set, clr);
-+	else
-+		ath9k_reg_rmw_single(hw_priv, reg_offset, set, clr);
-+
-+	return 0;
-+}
-+
- static void ath_usb_read_cachesize(struct ath_common *common, int *csz)
- {
- 	*csz = L1_CACHE_BYTES >> 2;
-@@ -501,6 +623,8 @@ static int ath9k_init_priv(struct ath9k_
- 	ah->reg_ops.write = ath9k_regwrite;
- 	ah->reg_ops.enable_write_buffer = ath9k_enable_regwrite_buffer;
- 	ah->reg_ops.write_flush = ath9k_regwrite_flush;
-+	ah->reg_ops.enable_rmw_buffer = ath9k_enable_rmw_buffer;
-+	ah->reg_ops.rmw_flush = ath9k_reg_rmw_flush;
- 	ah->reg_ops.rmw = ath9k_reg_rmw;
- 	priv->ah = ah;
- 
-@@ -686,6 +810,12 @@ static int ath9k_init_firmware_version(s
- 		return -EINVAL;
- 	}
- 
-+	if (priv->fw_version_major == 1 && priv->fw_version_minor < 4)
-+		set_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags);
-+
-+	dev_info(priv->dev, "FW RMW support: %s\n",
-+		test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags) ? "Off" : "On");
-+
- 	return 0;
- }
- 
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -100,6 +100,18 @@
- 			(_ah)->reg_ops.write_flush((_ah));	\
- 	} while (0)
- 
-+#define ENABLE_REG_RMW_BUFFER(_ah)					\
-+	do {								\
-+		if ((_ah)->reg_ops.enable_rmw_buffer)	\
-+			(_ah)->reg_ops.enable_rmw_buffer((_ah)); \
-+	} while (0)
-+
-+#define REG_RMW_BUFFER_FLUSH(_ah)					\
-+	do {								\
-+		if ((_ah)->reg_ops.rmw_flush)		\
-+			(_ah)->reg_ops.rmw_flush((_ah));	\
-+	} while (0)
-+
- #define PR_EEP(_s, _val)						\
- 	do {								\
- 		len += scnprintf(buf + len, size - len, "%20s : %10d\n",\
---- a/drivers/net/wireless/ath/ath9k/wmi.c
-+++ b/drivers/net/wireless/ath/ath9k/wmi.c
-@@ -61,6 +61,8 @@ static const char *wmi_cmd_to_name(enum
- 		return "WMI_REG_READ_CMDID";
- 	case WMI_REG_WRITE_CMDID:
- 		return "WMI_REG_WRITE_CMDID";
-+	case WMI_REG_RMW_CMDID:
-+		return "WMI_REG_RMW_CMDID";
- 	case WMI_RC_STATE_CHANGE_CMDID:
- 		return "WMI_RC_STATE_CHANGE_CMDID";
- 	case WMI_RC_RATE_UPDATE_CMDID:
-@@ -101,6 +103,7 @@ struct wmi *ath9k_init_wmi(struct ath9k_
- 	spin_lock_init(&wmi->event_lock);
- 	mutex_init(&wmi->op_mutex);
- 	mutex_init(&wmi->multi_write_mutex);
-+	mutex_init(&wmi->multi_rmw_mutex);
- 	init_completion(&wmi->cmd_wait);
- 	INIT_LIST_HEAD(&wmi->pending_tx_events);
- 	tasklet_init(&wmi->wmi_event_tasklet, ath9k_wmi_event_tasklet,
---- a/drivers/net/wireless/ath/ath9k/wmi.h
-+++ b/drivers/net/wireless/ath/ath9k/wmi.h
-@@ -112,6 +112,7 @@ enum wmi_cmd_id {
- 	WMI_TX_STATS_CMDID,
- 	WMI_RX_STATS_CMDID,
- 	WMI_BITRATE_MASK_CMDID,
-+	WMI_REG_RMW_CMDID,
- };
- 
- enum wmi_event_id {
-@@ -125,12 +126,19 @@ enum wmi_event_id {
- };
- 
- #define MAX_CMD_NUMBER 62
-+#define MAX_RMW_CMD_NUMBER 15
- 
- struct register_write {
- 	__be32 reg;
- 	__be32 val;
- };
- 
-+struct register_rmw {
-+	__be32 reg;
-+	__be32 set;
-+	__be32 clr;
-+} __packed;
-+
- struct ath9k_htc_tx_event {
- 	int count;
- 	struct __wmi_event_txstatus txs;
-@@ -156,10 +164,18 @@ struct wmi {
- 
- 	spinlock_t wmi_lock;
- 
-+	/* multi write section */
- 	atomic_t mwrite_cnt;
- 	struct register_write multi_write[MAX_CMD_NUMBER];
- 	u32 multi_write_idx;
- 	struct mutex multi_write_mutex;
-+
-+	/* multi rmw section */
-+	atomic_t m_rmw_cnt;
-+	struct register_rmw multi_rmw[MAX_RMW_CMD_NUMBER];
-+	u32 multi_rmw_idx;
-+	struct mutex multi_rmw_mutex;
-+
- };
- 
- struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv);
diff --git a/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch b/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch
new file mode 100644
index 0000000000..b646ab36dd
--- /dev/null
+++ b/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch
@@ -0,0 +1,186 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Tue, 2 Feb 2016 14:39:09 +0100
+Subject: [PATCH] cfg80211: add function for 802.3 conversion with separate
+ output buffer
+
+Use skb_copy_bits in preparation for allowing fragmented skbs
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/wireless/util.c
++++ b/net/wireless/util.c
+@@ -393,9 +393,9 @@ unsigned int ieee80211_get_hdrlen_from_s
+ }
+ EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
+ 
+-unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
++static unsigned int __ieee80211_get_mesh_hdrlen(u8 flags)
+ {
+-	int ae = meshhdr->flags & MESH_FLAGS_AE;
++	int ae = flags & MESH_FLAGS_AE;
+ 	/* 802.11-2012, 8.2.4.7.3 */
+ 	switch (ae) {
+ 	default:
+@@ -407,21 +407,31 @@ unsigned int ieee80211_get_mesh_hdrlen(s
+ 		return 18;
+ 	}
+ }
++
++unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
++{
++	return __ieee80211_get_mesh_hdrlen(meshhdr->flags);
++}
+ EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen);
+ 
+-int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
+-			   enum nl80211_iftype iftype)
++static int __ieee80211_data_to_8023(struct sk_buff *skb, struct ethhdr *ehdr,
++				    const u8 *addr, enum nl80211_iftype iftype)
+ {
+ 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+-	u16 hdrlen, ethertype;
+-	u8 *payload;
+-	u8 dst[ETH_ALEN];
+-	u8 src[ETH_ALEN] __aligned(2);
++	struct {
++		u8 hdr[ETH_ALEN] __aligned(2);
++		__be16 proto;
++	} payload;
++	struct ethhdr tmp;
++	u16 hdrlen;
++	u8 mesh_flags = 0;
+ 
+ 	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
+ 		return -1;
+ 
+ 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
++	if (skb->len < hdrlen + 8)
++		return -1;
+ 
+ 	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
+ 	 * header
+@@ -432,8 +442,11 @@ int ieee80211_data_to_8023(struct sk_buf
+ 	 *   1     0   BSSID SA    DA    n/a
+ 	 *   1     1   RA    TA    DA    SA
+ 	 */
+-	memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
+-	memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
++	memcpy(tmp.h_dest, ieee80211_get_DA(hdr), ETH_ALEN);
++	memcpy(tmp.h_source, ieee80211_get_SA(hdr), ETH_ALEN);
++
++	if (iftype == NL80211_IFTYPE_MESH_POINT)
++		skb_copy_bits(skb, hdrlen, &mesh_flags, 1);
+ 
+ 	switch (hdr->frame_control &
+ 		cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
+@@ -450,44 +463,31 @@ int ieee80211_data_to_8023(struct sk_buf
+ 			     iftype != NL80211_IFTYPE_STATION))
+ 			return -1;
+ 		if (iftype == NL80211_IFTYPE_MESH_POINT) {
+-			struct ieee80211s_hdr *meshdr =
+-				(struct ieee80211s_hdr *) (skb->data + hdrlen);
+-			/* make sure meshdr->flags is on the linear part */
+-			if (!pskb_may_pull(skb, hdrlen + 1))
+-				return -1;
+-			if (meshdr->flags & MESH_FLAGS_AE_A4)
++			if (mesh_flags & MESH_FLAGS_AE_A4)
+ 				return -1;
+-			if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
++			if (mesh_flags & MESH_FLAGS_AE_A5_A6) {
+ 				skb_copy_bits(skb, hdrlen +
+ 					offsetof(struct ieee80211s_hdr, eaddr1),
+-				       	dst, ETH_ALEN);
+-				skb_copy_bits(skb, hdrlen +
+-					offsetof(struct ieee80211s_hdr, eaddr2),
+-				        src, ETH_ALEN);
++					tmp.h_dest, 2 * ETH_ALEN);
+ 			}
+-			hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
++			hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags);
+ 		}
+ 		break;
+ 	case cpu_to_le16(IEEE80211_FCTL_FROMDS):
+ 		if ((iftype != NL80211_IFTYPE_STATION &&
+ 		     iftype != NL80211_IFTYPE_P2P_CLIENT &&
+ 		     iftype != NL80211_IFTYPE_MESH_POINT) ||
+-		    (is_multicast_ether_addr(dst) &&
+-		     ether_addr_equal(src, addr)))
++		    (is_multicast_ether_addr(tmp.h_dest) &&
++		     ether_addr_equal(tmp.h_source, addr)))
+ 			return -1;
+ 		if (iftype == NL80211_IFTYPE_MESH_POINT) {
+-			struct ieee80211s_hdr *meshdr =
+-				(struct ieee80211s_hdr *) (skb->data + hdrlen);
+-			/* make sure meshdr->flags is on the linear part */
+-			if (!pskb_may_pull(skb, hdrlen + 1))
+-				return -1;
+-			if (meshdr->flags & MESH_FLAGS_AE_A5_A6)
++			if (mesh_flags & MESH_FLAGS_AE_A5_A6)
+ 				return -1;
+-			if (meshdr->flags & MESH_FLAGS_AE_A4)
++			if (mesh_flags & MESH_FLAGS_AE_A4)
+ 				skb_copy_bits(skb, hdrlen +
+ 					offsetof(struct ieee80211s_hdr, eaddr1),
+-					src, ETH_ALEN);
+-			hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
++					tmp.h_source, ETH_ALEN);
++			hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags);
+ 		}
+ 		break;
+ 	case cpu_to_le16(0):
+@@ -498,33 +498,33 @@ int ieee80211_data_to_8023(struct sk_buf
+ 		break;
+ 	}
+ 
+-	if (!pskb_may_pull(skb, hdrlen + 8))
+-		return -1;
+-
+-	payload = skb->data + hdrlen;
+-	ethertype = (payload[6] << 8) | payload[7];
++	skb_copy_bits(skb, hdrlen, &payload, sizeof(payload));
++	tmp.h_proto = payload.proto;
+ 
+-	if (likely((ether_addr_equal(payload, rfc1042_header) &&
+-		    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+-		   ether_addr_equal(payload, bridge_tunnel_header))) {
++	if (likely((ether_addr_equal(payload.hdr, rfc1042_header) &&
++		    tmp.h_proto != htons(ETH_P_AARP) &&
++		    tmp.h_proto != htons(ETH_P_IPX)) ||
++		   ether_addr_equal(payload.hdr, bridge_tunnel_header)))
+ 		/* remove RFC1042 or Bridge-Tunnel encapsulation and
+ 		 * replace EtherType */
+-		skb_pull(skb, hdrlen + 6);
+-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
+-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
+-	} else {
+-		struct ethhdr *ehdr;
+-		__be16 len;
++		hdrlen += ETH_ALEN + 2;
++	else
++		tmp.h_proto = htons(skb->len);
+ 
+-		skb_pull(skb, hdrlen);
+-		len = htons(skb->len);
++	pskb_pull(skb, hdrlen);
++
++	if (!ehdr)
+ 		ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
+-		memcpy(ehdr->h_dest, dst, ETH_ALEN);
+-		memcpy(ehdr->h_source, src, ETH_ALEN);
+-		ehdr->h_proto = len;
+-	}
++	memcpy(ehdr, &tmp, sizeof(tmp));
++
+ 	return 0;
+ }
++
++int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
++			   enum nl80211_iftype iftype)
++{
++	return __ieee80211_data_to_8023(skb, NULL, addr, iftype);
++}
+ EXPORT_SYMBOL(ieee80211_data_to_8023);
+ 
+ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
diff --git a/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch b/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch
deleted file mode 100644
index c4dd1af187..0000000000
--- a/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:47 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal - use defs instead of magin
- numbers
-
-This function uses mixed styles for register names/numbers which
-is make harder reading and optimisation.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -430,22 +430,22 @@ static void ar9271_hw_pa_cal(struct ath_
- 	u32 regVal;
- 	unsigned int i;
- 	u32 regList[][2] = {
--		{ 0x786c, 0 },
--		{ 0x7854, 0 },
--		{ 0x7820, 0 },
--		{ 0x7824, 0 },
--		{ 0x7868, 0 },
--		{ 0x783c, 0 },
--		{ 0x7838, 0 } ,
--		{ 0x7828, 0 } ,
-+		{ AR9285_AN_TOP3, 0 },
-+		{ AR9285_AN_RXTXBB1, 0 },
-+		{ AR9285_AN_RF2G1, 0 },
-+		{ AR9285_AN_RF2G2, 0 },
-+		{ AR9285_AN_TOP2, 0 },
-+		{ AR9285_AN_RF2G8, 0 },
-+		{ AR9285_AN_RF2G7, 0 } ,
-+		{ AR9285_AN_RF2G3, 0 } ,
- 	};
- 
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		regList[i][1] = REG_READ(ah, regList[i][0]);
- 
--	regVal = REG_READ(ah, 0x7834);
-+	regVal = REG_READ(ah, AR9285_AN_RF2G6);
- 	regVal &= (~(0x1));
--	REG_WRITE(ah, 0x7834, regVal);
-+	REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- 	regVal = REG_READ(ah, 0x9808);
- 	regVal |= (0x1 << 27);
- 	REG_WRITE(ah, 0x9808, regVal);
-@@ -477,7 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_
- 	 * does not matter since we turn it off
- 	 */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
--
-+	/* 7828, b0-11, ccom=fff */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
- 
- 	/* Set:
-@@ -490,15 +490,16 @@ static void ar9271_hw_pa_cal(struct ath_
- 
- 	/* find off_6_1; */
- 	for (i = 6; i > 0; i--) {
--		regVal = REG_READ(ah, 0x7834);
-+		regVal = REG_READ(ah, AR9285_AN_RF2G6);
- 		regVal |= (1 << (20 + i));
--		REG_WRITE(ah, 0x7834, regVal);
-+		REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- 		udelay(1);
- 		/* regVal = REG_READ(ah, 0x7834); */
- 		regVal &= (~(0x1 << (20 + i)));
--		regVal |= (MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9)
-+		regVal |= (MS(REG_READ(ah, AR9285_AN_RF2G9),
-+			      AR9285_AN_RXTXBB1_SPARE9)
- 			    << (20 + i));
--		REG_WRITE(ah, 0x7834, regVal);
-+		REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- 	}
- 
- 	regVal = (regVal >> 20) & 0x7f;
-@@ -517,9 +518,9 @@ static void ar9271_hw_pa_cal(struct ath_
- 
- 	ENABLE_REGWRITE_BUFFER(ah);
- 
--	regVal = REG_READ(ah, 0x7834);
-+	regVal = REG_READ(ah, AR_AN_RF2G1_CH1);
- 	regVal |= 0x1;
--	REG_WRITE(ah, 0x7834, regVal);
-+	REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal);
- 	regVal = REG_READ(ah, 0x9808);
- 	regVal &= (~(0x1 << 27));
- 	REG_WRITE(ah, 0x9808, regVal);
diff --git a/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch b/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch
new file mode 100644
index 0000000000..2eeed22af0
--- /dev/null
+++ b/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch
@@ -0,0 +1,159 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Tue, 2 Feb 2016 14:39:10 +0100
+Subject: [PATCH] cfg80211: add support for non-linear skbs in
+ ieee80211_amsdu_to_8023s
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/wireless/util.c
++++ b/net/wireless/util.c
+@@ -644,73 +644,75 @@ int ieee80211_data_from_8023(struct sk_b
+ }
+ EXPORT_SYMBOL(ieee80211_data_from_8023);
+ 
++static struct sk_buff *
++__ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen,
++		       int offset, int len)
++{
++	struct sk_buff *frame;
++
++	if (skb->len - offset < len)
++		return NULL;
++
++	/*
++	 * Allocate and reserve two bytes more for payload
++	 * alignment since sizeof(struct ethhdr) is 14.
++	 */
++	frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len);
++
++	skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
++	skb_copy_bits(skb, offset, skb_put(frame, len), len);
++
++	return frame;
++}
+ 
+ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
+ 			      const u8 *addr, enum nl80211_iftype iftype,
+ 			      const unsigned int extra_headroom,
+ 			      bool has_80211_header)
+ {
++	unsigned int hlen = ALIGN(extra_headroom, 4);
+ 	struct sk_buff *frame = NULL;
+ 	u16 ethertype;
+ 	u8 *payload;
+-	const struct ethhdr *eth;
+-	int remaining, err;
+-	u8 dst[ETH_ALEN], src[ETH_ALEN];
+-
+-	if (skb_linearize(skb))
+-		goto out;
++	int offset = 0, remaining, err;
++	struct ethhdr eth;
++	bool reuse_skb = true;
++	bool last = false;
+ 
+ 	if (has_80211_header) {
+-		err = ieee80211_data_to_8023(skb, addr, iftype);
++		err = __ieee80211_data_to_8023(skb, &eth, addr, iftype);
+ 		if (err)
+ 			goto out;
+-
+-		/* skip the wrapping header */
+-		eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
+-		if (!eth)
+-			goto out;
+-	} else {
+-		eth = (struct ethhdr *) skb->data;
+ 	}
+ 
+-	while (skb != frame) {
++	while (!last) {
++		unsigned int subframe_len;
++		int len;
+ 		u8 padding;
+-		__be16 len = eth->h_proto;
+-		unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len);
+-
+-		remaining = skb->len;
+-		memcpy(dst, eth->h_dest, ETH_ALEN);
+-		memcpy(src, eth->h_source, ETH_ALEN);
+ 
++		skb_copy_bits(skb, offset, &eth, sizeof(eth));
++		len = ntohs(eth.h_proto);
++		subframe_len = sizeof(struct ethhdr) + len;
+ 		padding = (4 - subframe_len) & 0x3;
++
+ 		/* the last MSDU has no padding */
++		remaining = skb->len - offset;
+ 		if (subframe_len > remaining)
+ 			goto purge;
+ 
+-		skb_pull(skb, sizeof(struct ethhdr));
++		offset += sizeof(struct ethhdr);
+ 		/* reuse skb for the last subframe */
+-		if (remaining <= subframe_len + padding)
++		last = remaining <= subframe_len + padding;
++		if (!skb_is_nonlinear(skb) && last) {
++			skb_pull(skb, offset);
+ 			frame = skb;
+-		else {
+-			unsigned int hlen = ALIGN(extra_headroom, 4);
+-			/*
+-			 * Allocate and reserve two bytes more for payload
+-			 * alignment since sizeof(struct ethhdr) is 14.
+-			 */
+-			frame = dev_alloc_skb(hlen + subframe_len + 2);
++			reuse_skb = true;
++		} else {
++			frame = __ieee80211_amsdu_copy(skb, hlen, offset, len);
+ 			if (!frame)
+ 				goto purge;
+ 
+-			skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
+-			memcpy(skb_put(frame, ntohs(len)), skb->data,
+-				ntohs(len));
+-
+-			eth = (struct ethhdr *)skb_pull(skb, ntohs(len) +
+-							padding);
+-			if (!eth) {
+-				dev_kfree_skb(frame);
+-				goto purge;
+-			}
++			offset += len + padding;
+ 		}
+ 
+ 		skb_reset_network_header(frame);
+@@ -719,24 +721,20 @@ void ieee80211_amsdu_to_8023s(struct sk_
+ 
+ 		payload = frame->data;
+ 		ethertype = (payload[6] << 8) | payload[7];
+-
+ 		if (likely((ether_addr_equal(payload, rfc1042_header) &&
+ 			    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+ 			   ether_addr_equal(payload, bridge_tunnel_header))) {
+-			/* remove RFC1042 or Bridge-Tunnel
+-			 * encapsulation and replace EtherType */
+-			skb_pull(frame, 6);
+-			memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
+-			memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
+-		} else {
+-			memcpy(skb_push(frame, sizeof(__be16)), &len,
+-				sizeof(__be16));
+-			memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
+-			memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
++			eth.h_proto = htons(ethertype);
++			skb_pull(frame, ETH_ALEN + 2);
+ 		}
++
++		memcpy(skb_push(frame, sizeof(eth)), &eth, sizeof(eth));
+ 		__skb_queue_tail(list, frame);
+ 	}
+ 
++	if (!reuse_skb)
++		dev_kfree_skb(skb);
++
+ 	return;
+ 
+  purge:
diff --git a/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch b/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch
deleted file mode 100644
index f05287d919..0000000000
--- a/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:48 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use proper makroses.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -443,33 +443,30 @@ static void ar9271_hw_pa_cal(struct ath_
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		regList[i][1] = REG_READ(ah, regList[i][0]);
- 
--	regVal = REG_READ(ah, AR9285_AN_RF2G6);
--	regVal &= (~(0x1));
--	REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
--	regVal = REG_READ(ah, 0x9808);
--	regVal |= (0x1 << 27);
--	REG_WRITE(ah, 0x9808, regVal);
--
-+	/* 7834, b1=0 */
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
-+	/* 9808, b27=1 */
-+	REG_SET_BIT(ah, 0x9808, 1 << 27);
- 	/* 786c,b23,1, pwddac=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC, 1);
-+	REG_SET_BIT(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC);
- 	/* 7854, b5,1, pdrxtxbb=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1, 1);
-+	REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1);
- 	/* 7854, b7,1, pdv2i=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I, 1);
-+	REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I);
- 	/* 7854, b8,1, pddacinterface=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF, 1);
-+	REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF);
- 	/* 7824,b12,0, offcal=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL);
- 	/* 7838, b1,0, pwddb=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB);
- 	/* 7820,b11,0, enpacal=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL);
- 	/* 7820,b25,1, pdpadrv1=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1);
- 	/* 7820,b24,0, pdpadrv2=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2);
- 	/* 7820,b23,0, pdpaout=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT);
- 	/* 783c,b14-16,7, padrvgn2tab_0=7 */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G8, AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
- 	/*
-@@ -516,15 +513,13 @@ static void ar9271_hw_pa_cal(struct ath_
- 		ah->pacal_info.prev_offset = regVal;
- 	}
- 
--	ENABLE_REGWRITE_BUFFER(ah);
- 
--	regVal = REG_READ(ah, AR_AN_RF2G1_CH1);
--	regVal |= 0x1;
--	REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal);
--	regVal = REG_READ(ah, 0x9808);
--	regVal &= (~(0x1 << 27));
--	REG_WRITE(ah, 0x9808, regVal);
-+	/* 7834, b1=1 */
-+	REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
-+	/* 9808, b27=0 */
-+	REG_CLR_BIT(ah, 0x9808, 1 << 27);
- 
-+	ENABLE_REGWRITE_BUFFER(ah);
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		REG_WRITE(ah, regList[i][0], regList[i][1]);
- 
diff --git a/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch b/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch
new file mode 100644
index 0000000000..c4155a1181
--- /dev/null
+++ b/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch
@@ -0,0 +1,155 @@
+From: Sven Eckelmann <sven@narfation.org>
+Date: Tue, 26 Jan 2016 17:11:13 +0100
+Subject: [PATCH] mac80211: Parse legacy and HT rate in injected frames
+
+Drivers/devices without their own rate control algorithm can get the
+information what rates they should use from either the radiotap header of
+injected frames or from the rate control algorithm. But the parsing of the
+legacy rate information from the radiotap header was removed in commit
+e6a9854b05c1 ("mac80211/drivers: rewrite the rate control API").
+
+The removal of this feature heavily reduced the usefulness of frame
+injection when wanting to simulate specific transmission behavior. Having
+rate parsing together with MCS rates and retry support allows a fine
+grained selection of the tx behavior of injected frames for these kind of
+tests.
+
+Signed-off-by: Sven Eckelmann <sven@narfation.org>
+Cc: Simon Wunderlich <sw@simonwunderlich.de>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -708,12 +708,14 @@ enum mac80211_tx_info_flags {
+  *	protocol frame (e.g. EAP)
+  * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll
+  *	frame (PS-Poll or uAPSD).
++ * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
+  *
+  * These flags are used in tx_info->control.flags.
+  */
+ enum mac80211_tx_control_flags {
+ 	IEEE80211_TX_CTRL_PORT_CTRL_PROTO	= BIT(0),
+ 	IEEE80211_TX_CTRL_PS_RESPONSE		= BIT(1),
++	IEEE80211_TX_CTRL_RATE_INJECT		= BIT(2),
+ };
+ 
+ /*
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -710,6 +710,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 
+ 	info->control.short_preamble = txrc.short_preamble;
+ 
++	/* don't ask rate control when rate already injected via radiotap */
++	if (info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT)
++		return TX_CONTINUE;
++
+ 	if (tx->sta)
+ 		assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC);
+ 
+@@ -1665,15 +1669,24 @@ void ieee80211_xmit(struct ieee80211_sub
+ 	ieee80211_tx(sdata, sta, skb, false);
+ }
+ 
+-static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb)
++static bool ieee80211_parse_tx_radiotap(struct ieee80211_local *local,
++					struct sk_buff *skb)
+ {
+ 	struct ieee80211_radiotap_iterator iterator;
+ 	struct ieee80211_radiotap_header *rthdr =
+ 		(struct ieee80211_radiotap_header *) skb->data;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++	struct ieee80211_supported_band *sband =
++		local->hw.wiphy->bands[info->band];
+ 	int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len,
+ 						   NULL);
+ 	u16 txflags;
++	u16 rate = 0;
++	bool rate_found = false;
++	u8 rate_retries = 0;
++	u16 rate_flags = 0;
++	u8 mcs_known, mcs_flags;
++	int i;
+ 
+ 	info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
+ 		       IEEE80211_TX_CTL_DONTFRAG;
+@@ -1724,6 +1737,35 @@ static bool ieee80211_parse_tx_radiotap(
+ 				info->flags |= IEEE80211_TX_CTL_NO_ACK;
+ 			break;
+ 
++		case IEEE80211_RADIOTAP_RATE:
++			rate = *iterator.this_arg;
++			rate_flags = 0;
++			rate_found = true;
++			break;
++
++		case IEEE80211_RADIOTAP_DATA_RETRIES:
++			rate_retries = *iterator.this_arg;
++			break;
++
++		case IEEE80211_RADIOTAP_MCS:
++			mcs_known = iterator.this_arg[0];
++			mcs_flags = iterator.this_arg[1];
++			if (!(mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_MCS))
++				break;
++
++			rate_found = true;
++			rate = iterator.this_arg[2];
++			rate_flags = IEEE80211_TX_RC_MCS;
++
++			if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_GI &&
++			    mcs_flags & IEEE80211_RADIOTAP_MCS_SGI)
++				rate_flags |= IEEE80211_TX_RC_SHORT_GI;
++
++			if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW &&
++			    mcs_flags & IEEE80211_RADIOTAP_MCS_BW_40)
++				rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
++			break;
++
+ 		/*
+ 		 * Please update the file
+ 		 * Documentation/networking/mac80211-injection.txt
+@@ -1738,6 +1780,32 @@ static bool ieee80211_parse_tx_radiotap(
+ 	if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */
+ 		return false;
+ 
++	if (rate_found) {
++		info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT;
++
++		for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
++			info->control.rates[i].idx = -1;
++			info->control.rates[i].flags = 0;
++			info->control.rates[i].count = 0;
++		}
++
++		if (rate_flags & IEEE80211_TX_RC_MCS) {
++			info->control.rates[0].idx = rate;
++		} else {
++			for (i = 0; i < sband->n_bitrates; i++) {
++				if (rate * 5 != sband->bitrates[i].bitrate)
++					continue;
++
++				info->control.rates[0].idx = i;
++				break;
++			}
++		}
++
++		info->control.rates[0].flags = rate_flags;
++		info->control.rates[0].count = min_t(u8, rate_retries + 1,
++						     local->hw.max_rate_tries);
++	}
++
+ 	/*
+ 	 * remove the radiotap header
+ 	 * iterator->_max_length was sanity-checked against
+@@ -1819,7 +1887,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
+ 		      IEEE80211_TX_CTL_INJECTED;
+ 
+ 	/* process and remove the injection radiotap header */
+-	if (!ieee80211_parse_tx_radiotap(skb))
++	if (!ieee80211_parse_tx_radiotap(local, skb))
+ 		goto fail;
+ 
+ 	rcu_read_lock();
diff --git a/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch b/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch
deleted file mode 100644
index 7247369498..0000000000
--- a/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:49 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use RMW buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -436,13 +436,14 @@ static void ar9271_hw_pa_cal(struct ath_
- 		{ AR9285_AN_RF2G2, 0 },
- 		{ AR9285_AN_TOP2, 0 },
- 		{ AR9285_AN_RF2G8, 0 },
--		{ AR9285_AN_RF2G7, 0 } ,
--		{ AR9285_AN_RF2G3, 0 } ,
-+		{ AR9285_AN_RF2G7, 0 },
-+		{ AR9285_AN_RF2G3, 0 },
- 	};
- 
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		regList[i][1] = REG_READ(ah, regList[i][0]);
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	/* 7834, b1=0 */
- 	REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
- 	/* 9808, b27=1 */
-@@ -476,6 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
- 	/* 7828, b0-11, ccom=fff */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	/* Set:
- 	 * localmode=1,bmode=1,bmoderxtx=1,synthon=1,
-@@ -514,10 +516,12 @@ static void ar9271_hw_pa_cal(struct ath_
- 	}
- 
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	/* 7834, b1=1 */
- 	REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
- 	/* 9808, b27=0 */
- 	REG_CLR_BIT(ah, 0x9808, 1 << 27);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	ENABLE_REGWRITE_BUFFER(ah);
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
diff --git a/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch b/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch
new file mode 100644
index 0000000000..e7bfb9c83d
--- /dev/null
+++ b/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch
@@ -0,0 +1,317 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Fri, 5 Feb 2016 01:38:51 +0100
+Subject: [PATCH] mac80211: add A-MSDU tx support
+
+Requires software tx queueing support. frag_list support (for zero-copy)
+is optional.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -709,6 +709,7 @@ enum mac80211_tx_info_flags {
+  * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll
+  *	frame (PS-Poll or uAPSD).
+  * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
++ * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
+  *
+  * These flags are used in tx_info->control.flags.
+  */
+@@ -716,6 +717,7 @@ enum mac80211_tx_control_flags {
+ 	IEEE80211_TX_CTRL_PORT_CTRL_PROTO	= BIT(0),
+ 	IEEE80211_TX_CTRL_PS_RESPONSE		= BIT(1),
+ 	IEEE80211_TX_CTRL_RATE_INJECT		= BIT(2),
++	IEEE80211_TX_CTRL_AMSDU			= BIT(3),
+ };
+ 
+ /*
+@@ -1728,6 +1730,7 @@ struct ieee80211_sta_rates {
+  *		  size is min(max_amsdu_len, 7935) bytes.
+  *	Both additional HT limits must be enforced by the low level driver.
+  *	This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2).
++ * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
+  * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
+  */
+ struct ieee80211_sta {
+@@ -1748,6 +1751,7 @@ struct ieee80211_sta {
+ 	bool mfp;
+ 	u8 max_amsdu_subframes;
+ 	u16 max_amsdu_len;
++	u16 max_rc_amsdu_len;
+ 
+ 	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
+ 
+@@ -1961,6 +1965,15 @@ struct ieee80211_txq {
+  *	order and does not need to manage its own reorder buffer or BA session
+  *	timeout.
+  *
++ * @IEEE80211_HW_TX_AMSDU: Hardware (or driver) supports software aggregated
++ *	A-MSDU frames. Requires software tx queueing and fast-xmit support.
++ *	When not using minstrel/minstrel_ht rate control, the driver should
++ *	limit the maximum A-MSDU size based on the current tx rate by setting
++ *	max_rc_amsdu_len in struct ieee80211_sta.
++ *
++ * @IEEE80211_HW_TX_FRAG_LIST: Hardware (or driver) supports sending frag_list
++ *	skbs, needed for zero-copy software A-MSDU.
++ *
+  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
+  */
+ enum ieee80211_hw_flags {
+@@ -1998,6 +2011,8 @@ enum ieee80211_hw_flags {
+ 	IEEE80211_HW_BEACON_TX_STATUS,
+ 	IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR,
+ 	IEEE80211_HW_SUPPORTS_REORDERING_BUFFER,
++	IEEE80211_HW_TX_AMSDU,
++	IEEE80211_HW_TX_FRAG_LIST,
+ 
+ 	/* keep last, obviously */
+ 	NUM_IEEE80211_HW_FLAGS
+@@ -2070,6 +2085,9 @@ enum ieee80211_hw_flags {
+  *	size is smaller (an example is LinkSys WRT120N with FW v1.0.07
+  *	build 002 Jun 18 2012).
+  *
++ * @max_tx_fragments: maximum number of tx buffers per (A)-MSDU, sum
++ *	of 1 + skb_shinfo(skb)->nr_frags for each skb in the frag_list.
++ *
+  * @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX
+  *	(if %IEEE80211_HW_QUEUE_CONTROL is set)
+  *
+@@ -2124,6 +2142,7 @@ struct ieee80211_hw {
+ 	u8 max_rate_tries;
+ 	u8 max_rx_aggregation_subframes;
+ 	u8 max_tx_aggregation_subframes;
++	u8 max_tx_fragments;
+ 	u8 offchannel_tx_hw_queue;
+ 	u8 radiotap_mcs_details;
+ 	u16 radiotap_vht_details;
+--- a/net/mac80211/agg-tx.c
++++ b/net/mac80211/agg-tx.c
+@@ -935,6 +935,7 @@ void ieee80211_process_addba_resp(struct
+ 				  size_t len)
+ {
+ 	struct tid_ampdu_tx *tid_tx;
++	struct ieee80211_txq *txq;
+ 	u16 capab, tid;
+ 	u8 buf_size;
+ 	bool amsdu;
+@@ -945,6 +946,10 @@ void ieee80211_process_addba_resp(struct
+ 	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
+ 	buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes);
+ 
++	txq = sta->sta.txq[tid];
++	if (!amsdu && txq)
++		set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags);
++
+ 	mutex_lock(&sta->ampdu_mlme.mtx);
+ 
+ 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+--- a/net/mac80211/debugfs.c
++++ b/net/mac80211/debugfs.c
+@@ -127,6 +127,8 @@ static const char *hw_flag_names[NUM_IEE
+ 	FLAG(BEACON_TX_STATUS),
+ 	FLAG(NEEDS_UNIQUE_STA_ADDR),
+ 	FLAG(SUPPORTS_REORDERING_BUFFER),
++	FLAG(TX_AMSDU),
++	FLAG(TX_FRAG_LIST),
+ 
+ 	/* keep last for the build bug below */
+ 	(void *)0x1
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -799,6 +799,7 @@ struct mac80211_qos_map {
+ enum txq_info_flags {
+ 	IEEE80211_TXQ_STOP,
+ 	IEEE80211_TXQ_AMPDU,
++	IEEE80211_TXQ_NO_AMSDU,
+ };
+ 
+ struct txq_info {
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1318,6 +1318,10 @@ struct sk_buff *ieee80211_tx_dequeue(str
+ out:
+ 	spin_unlock_bh(&txqi->queue.lock);
+ 
++	if (skb && skb_has_frag_list(skb) &&
++	    !ieee80211_hw_check(&local->hw, TX_FRAG_LIST))
++		skb_linearize(skb);
++
+ 	return skb;
+ }
+ EXPORT_SYMBOL(ieee80211_tx_dequeue);
+@@ -2757,6 +2761,163 @@ void ieee80211_clear_fast_xmit(struct st
+ 		kfree_rcu(fast_tx, rcu_head);
+ }
+ 
++static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local,
++					struct sk_buff *skb, int headroom,
++					int *subframe_len)
++{
++	int amsdu_len = *subframe_len + sizeof(struct ethhdr);
++	int padding = (4 - amsdu_len) & 3;
++
++	if (skb_headroom(skb) < headroom || skb_tailroom(skb) < padding) {
++		I802_DEBUG_INC(local->tx_expand_skb_head);
++
++		if (pskb_expand_head(skb, headroom, padding, GFP_ATOMIC)) {
++			wiphy_debug(local->hw.wiphy,
++				    "failed to reallocate TX buffer\n");
++			return false;
++		}
++	}
++
++	if (padding) {
++		*subframe_len += padding;
++		memset(skb_put(skb, padding), 0, padding);
++	}
++
++	return true;
++}
++
++static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata,
++					 struct ieee80211_fast_tx *fast_tx,
++					 struct sk_buff *skb)
++{
++	struct ieee80211_local *local = sdata->local;
++	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++	struct ieee80211_hdr *hdr;
++	struct ethhdr amsdu_hdr;
++	int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header);
++	int subframe_len = skb->len - hdr_len;
++	void *data;
++	u8 *qc;
++
++	if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
++		return false;
++
++	if (info->control.flags & IEEE80211_TX_CTRL_AMSDU)
++		return true;
++
++	if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(amsdu_hdr),
++					 &subframe_len))
++		return false;
++
++	amsdu_hdr.h_proto = cpu_to_be16(subframe_len);
++	memcpy(amsdu_hdr.h_source, skb->data + fast_tx->sa_offs, ETH_ALEN);
++	memcpy(amsdu_hdr.h_dest, skb->data + fast_tx->da_offs, ETH_ALEN);
++
++	data = skb_push(skb, sizeof(amsdu_hdr));
++	memmove(data, data + sizeof(amsdu_hdr), hdr_len);
++	memcpy(data + hdr_len, &amsdu_hdr, sizeof(amsdu_hdr));
++
++	hdr = data;
++	qc = ieee80211_get_qos_ctl(hdr);
++	*qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT;
++
++	info->control.flags |= IEEE80211_TX_CTRL_AMSDU;
++
++	return true;
++}
++
++static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
++				      struct sta_info *sta,
++				      struct ieee80211_fast_tx *fast_tx,
++				      struct sk_buff *skb)
++{
++	struct ieee80211_local *local = sdata->local;
++	u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
++	struct ieee80211_txq *txq = sta->sta.txq[tid];
++	struct txq_info *txqi;
++	struct sk_buff **frag_tail, *head;
++	int subframe_len = skb->len - ETH_ALEN;
++	u8 max_subframes = sta->sta.max_amsdu_subframes;
++	int max_frags = local->hw.max_tx_fragments;
++	int max_amsdu_len = sta->sta.max_amsdu_len;
++	__be16 len;
++	void *data;
++	bool ret = false;
++	int n = 1, nfrags;
++
++	if (!ieee80211_hw_check(&local->hw, TX_AMSDU))
++		return false;
++
++	if (!txq)
++		return false;
++
++	txqi = to_txq_info(txq);
++	if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags))
++		return false;
++
++	if (sta->sta.max_rc_amsdu_len)
++		max_amsdu_len = min_t(int, max_amsdu_len,
++				      sta->sta.max_rc_amsdu_len);
++
++	spin_lock_bh(&txqi->queue.lock);
++
++	head = skb_peek_tail(&txqi->queue);
++	if (!head)
++		goto out;
++
++	if (skb->len + head->len > max_amsdu_len)
++		goto out;
++
++	/*
++	 * HT A-MPDU limits maximum MPDU size to 4095 bytes. Since aggregation
++	 * sessions are started/stopped without txq flush, use the limit here
++	 * to avoid having to de-aggregate later.
++	 */
++	if (skb->len + head->len > 4095 &&
++	    !sta->sta.vht_cap.vht_supported)
++		goto out;
++
++	if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head))
++		goto out;
++
++	nfrags = 1 + skb_shinfo(skb)->nr_frags;
++	nfrags += 1 + skb_shinfo(head)->nr_frags;
++	frag_tail = &skb_shinfo(head)->frag_list;
++	while (*frag_tail) {
++		nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags;
++		frag_tail = &(*frag_tail)->next;
++		n++;
++	}
++
++	if (max_subframes && n > max_subframes)
++		goto out;
++
++	if (max_frags && nfrags > max_frags)
++		goto out;
++
++	if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + 2,
++					 &subframe_len))
++		return false;
++
++	ret = true;
++	data = skb_push(skb, ETH_ALEN + 2);
++	memmove(data, data + ETH_ALEN + 2, 2 * ETH_ALEN);
++
++	data += 2 * ETH_ALEN;
++	len = cpu_to_be16(subframe_len);
++	memcpy(data, &len, 2);
++	memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header));
++
++	head->len += skb->len;
++	head->data_len += skb->len;
++	*frag_tail = skb;
++
++out:
++	spin_unlock_bh(&txqi->queue.lock);
++
++	return ret;
++}
++
+ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
+ 				struct net_device *dev, struct sta_info *sta,
+ 				struct ieee80211_fast_tx *fast_tx,
+@@ -2811,6 +2972,10 @@ static bool ieee80211_xmit_fast(struct i
+ 
+ 	ieee80211_tx_stats(dev, skb->len + extra_head);
+ 
++	if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) &&
++	    ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb))
++		return true;
++
+ 	/* will not be crypto-handled beyond what we do here, so use false
+ 	 * as the may-encrypt argument for the resize to not account for
+ 	 * more room than we already have in 'extra_head'
diff --git a/package/kernel/mac80211/patches/863-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch b/package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch
similarity index 83%
rename from package/kernel/mac80211/patches/863-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch
rename to package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch
index d6b9e37ac1..9277b2cabc 100644
--- a/package/kernel/mac80211/patches/863-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch
+++ b/package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch
@@ -1,5 +1,5 @@
 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 Jan 2016 16:35:12 +0100
+Date: Wed, 20 Jan 2016 16:46:04 +0100
 Subject: [PATCH] brcmfmac: fix setting primary channel for 80 MHz width
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
@@ -14,13 +14,12 @@ offset in MHz against -2 or 2 which was resulting in picking a wrong
 primary channel.
 
 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 ---
- .../brcm80211/brcmfmac/cfg80211.c         | 23 ++++++++++------------
- 1 file changed, 10 insertions(+), 13 deletions(-)
 
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -246,7 +246,7 @@ static u16 chandef_to_chanspec(struct br
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -247,7 +247,7 @@ static u16 chandef_to_chanspec(struct br
  	brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n",
  		  ch->chan->center_freq, ch->center_freq1, ch->width);
  	ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1);
@@ -29,7 +28,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  	switch (ch->width) {
  	case NL80211_CHAN_WIDTH_20:
  	case NL80211_CHAN_WIDTH_20_NOHT:
-@@ -255,24 +255,21 @@ static u16 chandef_to_chanspec(struct br
+@@ -256,24 +256,21 @@ static u16 chandef_to_chanspec(struct br
  		break;
  	case NL80211_CHAN_WIDTH_40:
  		ch_inf.bw = BRCMU_CHAN_BW_40;
diff --git a/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch b/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch
new file mode 100644
index 0000000000..d7018dab3d
--- /dev/null
+++ b/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch
@@ -0,0 +1,51 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 26 Jan 2016 17:57:01 +0100
+Subject: [PATCH] brcmfmac: analyze descriptors of current component only
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+So far we were looking for address descriptors without a check for
+crossing current component border. In case of dealing with unsupported
+descriptor or descriptor missing at all the code would incorrectly get
+data from another component.
+
+Consider this binary-described component from BCM4366 EROM:
+4bf83b01	TAG==CI		CID==0x83b
+20080201	TAG==CI		PORTS==0+1	WRAPPERS==0+1
+18400035	TAG==ADDR	SZ_SZD		TYPE_SLAVE
+00050000
+18107085	TAG==ADDR	SZ_4K		TYPE_SWRAP
+
+Driver was assigning invalid base address to this core:
+brcmfmac:  [6 ] core 0x83b:32 base 0x18109000 wrap 0x18107000
+which came from totally different component defined in EROM:
+43b36701	TAG==CI		CID==0x367
+00000201	TAG==CI		PORTS==0+1	WRAPPERS==0+0
+18109005	TAG==ADDR	SZ_4K		TYPE_SLAVE
+
+This change will also allow us to support components without wrapper
+address in the future.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+@@ -803,7 +803,14 @@ static int brcmf_chip_dmp_get_regaddr(st
+ 				*eromaddr -= 4;
+ 				return -EFAULT;
+ 			}
+-		} while (desc != DMP_DESC_ADDRESS);
++		} while (desc != DMP_DESC_ADDRESS &&
++			 desc != DMP_DESC_COMPONENT);
++
++		/* stop if we crossed current component border */
++		if (desc == DMP_DESC_COMPONENT) {
++			*eromaddr -= 4;
++			return 0;
++		}
+ 
+ 		/* skip upper 32-bit address descriptor */
+ 		if (val & DMP_DESC_ADDRSIZE_GT32)
diff --git a/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch b/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch
new file mode 100644
index 0000000000..045ab4953b
--- /dev/null
+++ b/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch
@@ -0,0 +1,28 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 26 Jan 2016 17:57:02 +0100
+Subject: [PATCH] brcmfmac: allow storing PMU core without wrapper address
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Separated PMU core can be found in new devices and should be used for
+accessing PMU registers (which were routed through ChipCommon so far).
+This core is one of exceptions that doesn't have or need wrapper address
+to be still safely accessible.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+@@ -883,7 +883,8 @@ int brcmf_chip_dmp_erom_scan(struct brcm
+ 		rev = (val & DMP_COMP_REVISION) >> DMP_COMP_REVISION_S;
+ 
+ 		/* need core with ports */
+-		if (nmw + nsw == 0)
++		if (nmw + nsw == 0 &&
++		    id != BCMA_CORE_PMU)
+ 			continue;
+ 
+ 		/* try to obtain register address info */
diff --git a/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch b/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch
new file mode 100644
index 0000000000..7b7ba4f743
--- /dev/null
+++ b/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch
@@ -0,0 +1,43 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 26 Jan 2016 17:57:03 +0100
+Subject: [PATCH] brcmfmac: read extended capabilities of ChipCommon core
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is an extra bitfield with info about some present hardware.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+@@ -1025,6 +1025,9 @@ static int brcmf_chip_setup(struct brcmf
+ 	/* get chipcommon capabilites */
+ 	pub->cc_caps = chip->ops->read32(chip->ctx,
+ 					 CORE_CC_REG(base, capabilities));
++	pub->cc_caps_ext = chip->ops->read32(chip->ctx,
++					     CORE_CC_REG(base,
++							 capabilities_ext));
+ 
+ 	/* get pmu caps & rev */
+ 	if (pub->cc_caps & CC_CAP_PMU) {
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
+@@ -27,6 +27,7 @@
+  * @chip: chip identifier.
+  * @chiprev: chip revision.
+  * @cc_caps: chipcommon core capabilities.
++ * @cc_caps_ext: chipcommon core extended capabilities.
+  * @pmucaps: PMU capabilities.
+  * @pmurev: PMU revision.
+  * @rambase: RAM base address (only applicable for ARM CR4 chips).
+@@ -38,6 +39,7 @@ struct brcmf_chip {
+ 	u32 chip;
+ 	u32 chiprev;
+ 	u32 cc_caps;
++	u32 cc_caps_ext;
+ 	u32 pmucaps;
+ 	u32 pmurev;
+ 	u32 rambase;
diff --git a/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch b/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch
new file mode 100644
index 0000000000..2af6fd93bc
--- /dev/null
+++ b/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch
@@ -0,0 +1,148 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 26 Jan 2016 17:57:04 +0100
+Subject: [PATCH] brcmfmac: access PMU registers using standalone PMU core if
+ available
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+On recent Broadcom chipsets PMU is present as separated core and it
+can't be accessed using ChipCommon anymore as it fails with e.g.:
+[   18.198412] Unhandled fault: imprecise external abort (0x1406) at 0xb6da200f
+
+Add a new helper function that will return a proper core that should be
+used for accessing PMU registers.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+@@ -1014,6 +1014,7 @@ static int brcmf_chip_setup(struct brcmf
+ {
+ 	struct brcmf_chip *pub;
+ 	struct brcmf_core_priv *cc;
++	struct brcmf_core *pmu;
+ 	u32 base;
+ 	u32 val;
+ 	int ret = 0;
+@@ -1030,9 +1031,10 @@ static int brcmf_chip_setup(struct brcmf
+ 							 capabilities_ext));
+ 
+ 	/* get pmu caps & rev */
++	pmu = brcmf_chip_get_pmu(pub); /* after reading cc_caps_ext */
+ 	if (pub->cc_caps & CC_CAP_PMU) {
+ 		val = chip->ops->read32(chip->ctx,
+-					CORE_CC_REG(base, pmucapabilities));
++					CORE_CC_REG(pmu->base, pmucapabilities));
+ 		pub->pmurev = val & PCAP_REV_MASK;
+ 		pub->pmucaps = val;
+ 	}
+@@ -1131,6 +1133,23 @@ struct brcmf_core *brcmf_chip_get_chipco
+ 	return &cc->pub;
+ }
+ 
++struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub)
++{
++	struct brcmf_core *cc = brcmf_chip_get_chipcommon(pub);
++	struct brcmf_core *pmu;
++
++	/* See if there is separated PMU core available */
++	if (cc->rev >= 35 &&
++	    pub->cc_caps_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) {
++		pmu = brcmf_chip_get_core(pub, BCMA_CORE_PMU);
++		if (pmu)
++			return pmu;
++	}
++
++	/* Fallback to ChipCommon core for older hardware */
++	return cc;
++}
++
+ bool brcmf_chip_iscoreup(struct brcmf_core *pub)
+ {
+ 	struct brcmf_core_priv *core;
+@@ -1301,6 +1320,7 @@ bool brcmf_chip_sr_capable(struct brcmf_
+ {
+ 	u32 base, addr, reg, pmu_cc3_mask = ~0;
+ 	struct brcmf_chip_priv *chip;
++	struct brcmf_core *pmu = brcmf_chip_get_pmu(pub);
+ 
+ 	brcmf_dbg(TRACE, "Enter\n");
+ 
+@@ -1320,9 +1340,9 @@ bool brcmf_chip_sr_capable(struct brcmf_
+ 	case BRCM_CC_4335_CHIP_ID:
+ 	case BRCM_CC_4339_CHIP_ID:
+ 		/* read PMU chipcontrol register 3 */
+-		addr = CORE_CC_REG(base, chipcontrol_addr);
++		addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
+ 		chip->ops->write32(chip->ctx, addr, 3);
+-		addr = CORE_CC_REG(base, chipcontrol_data);
++		addr = CORE_CC_REG(pmu->base, chipcontrol_data);
+ 		reg = chip->ops->read32(chip->ctx, addr);
+ 		return (reg & pmu_cc3_mask) != 0;
+ 	case BRCM_CC_43430_CHIP_ID:
+@@ -1330,12 +1350,12 @@ bool brcmf_chip_sr_capable(struct brcmf_
+ 		reg = chip->ops->read32(chip->ctx, addr);
+ 		return reg != 0;
+ 	default:
+-		addr = CORE_CC_REG(base, pmucapabilities_ext);
++		addr = CORE_CC_REG(pmu->base, pmucapabilities_ext);
+ 		reg = chip->ops->read32(chip->ctx, addr);
+ 		if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0)
+ 			return false;
+ 
+-		addr = CORE_CC_REG(base, retention_ctl);
++		addr = CORE_CC_REG(pmu->base, retention_ctl);
+ 		reg = chip->ops->read32(chip->ctx, addr);
+ 		return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK |
+ 			       PMU_RCTL_LOGIC_DISABLE_MASK)) == 0;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
+@@ -85,6 +85,7 @@ struct brcmf_chip *brcmf_chip_attach(voi
+ void brcmf_chip_detach(struct brcmf_chip *chip);
+ struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *chip, u16 coreid);
+ struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *chip);
++struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub);
+ bool brcmf_chip_iscoreup(struct brcmf_core *core);
+ void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset);
+ void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -3615,7 +3615,6 @@ brcmf_sdio_drivestrengthinit(struct brcm
+ 	const struct sdiod_drive_str *str_tab = NULL;
+ 	u32 str_mask;
+ 	u32 str_shift;
+-	u32 base;
+ 	u32 i;
+ 	u32 drivestrength_sel = 0;
+ 	u32 cc_data_temp;
+@@ -3658,14 +3657,15 @@ brcmf_sdio_drivestrengthinit(struct brcm
+ 	}
+ 
+ 	if (str_tab != NULL) {
++		struct brcmf_core *pmu = brcmf_chip_get_pmu(ci);
++
+ 		for (i = 0; str_tab[i].strength != 0; i++) {
+ 			if (drivestrength >= str_tab[i].strength) {
+ 				drivestrength_sel = str_tab[i].sel;
+ 				break;
+ 			}
+ 		}
+-		base = brcmf_chip_get_chipcommon(ci)->base;
+-		addr = CORE_CC_REG(base, chipcontrol_addr);
++		addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
+ 		brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
+ 		cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+ 		cc_data_temp &= ~str_mask;
+@@ -3835,8 +3835,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ 		goto fail;
+ 
+ 	/* set PMUControl so a backplane reset does PMU state reload */
+-	reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base,
+-			       pmucontrol);
++	reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
+ 	reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
+ 	if (err)
+ 		goto fail;
diff --git a/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch b/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch
new file mode 100644
index 0000000000..35887fcb59
--- /dev/null
+++ b/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch
@@ -0,0 +1,38 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 26 Jan 2016 17:57:05 +0100
+Subject: [PATCH] brcmfmac: add support for 14e4:4365 PCI ID with BCM4366
+ chipset
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+On Broadcom ARM routers BCM4366 cards are available with 14e4:4365 ID.
+Unfortunately this ID was already used by Broadcom for cards with
+BCM43142, a totally different chipset requiring SoftMAC driver. To avoid
+a conflict between brcmfmac and bcma use more specific ID entry with
+subvendor and subdevice specified.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -1951,6 +1951,9 @@ static const struct dev_pm_ops brcmf_pci
+ 
+ #define BRCMF_PCIE_DEVICE(dev_id)	{ BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\
+ 	PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
++#define BRCMF_PCIE_DEVICE_SUB(dev_id, subvend, subdev)	{ \
++	BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\
++	subvend, subdev, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
+ 
+ static struct pci_device_id brcmf_pcie_devid_table[] = {
+ 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID),
+@@ -1966,6 +1969,7 @@ static struct pci_device_id brcmf_pcie_d
+ 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_DEVICE_ID),
+ 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_2G_DEVICE_ID),
+ 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_5G_DEVICE_ID),
++	BRCMF_PCIE_DEVICE_SUB(0x4365, BRCM_PCIE_VENDOR_ID_BROADCOM, 0x4365),
+ 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID),
+ 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID),
+ 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID),
diff --git a/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch b/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch
deleted file mode 100644
index 246bb9d295..0000000000
--- a/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:50 +0100
-Subject: [PATCH] ath9k: add multi_read to be compatible with ath9k_htc
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -141,6 +141,16 @@ static unsigned int ath9k_ioread32(void
- 	return val;
- }
- 
-+static void ath9k_multi_ioread32(void *hw_priv, u32 *addr,
-+                                u32 *val, u16 count)
-+{
-+	int i;
-+
-+	for (i = 0; i < count; i++)
-+		val[i] = ath9k_ioread32(hw_priv, addr[i]);
-+}
-+
-+
- static unsigned int __ath9k_reg_rmw(struct ath_softc *sc, u32 reg_offset,
- 				    u32 set, u32 clr)
- {
-@@ -530,6 +540,7 @@ static int ath9k_init_softc(u16 devid, s
- 	ah->hw = sc->hw;
- 	ah->hw_version.devid = devid;
- 	ah->reg_ops.read = ath9k_ioread32;
-+	ah->reg_ops.multi_read = ath9k_multi_ioread32;
- 	ah->reg_ops.write = ath9k_iowrite32;
- 	ah->reg_ops.rmw = ath9k_reg_rmw;
- 	pCap = &ah->caps;
diff --git a/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch b/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch
deleted file mode 100644
index 2eda1c9d25..0000000000
--- a/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:51 +0100
-Subject: [PATCH] ath9k: add new function ath9k_hw_read_array
-
-REG_READ generate most overhead on usb bus. It send and read micro packages
-and reduce usb bandwidth. To reduce this overhead we should read in batches.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -121,6 +121,36 @@ void ath9k_hw_write_array(struct ath_hw
- 	REGWRITE_BUFFER_FLUSH(ah);
- }
- 
-+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size)
-+{
-+	u32 *tmp_reg_list, *tmp_data;
-+	int i;
-+
-+	tmp_reg_list = kmalloc(size * sizeof(u32), GFP_KERNEL);
-+	if (!tmp_reg_list) {
-+		dev_err(ah->dev, "%s: tmp_reg_list: alloc filed\n", __func__);
-+		return;
-+	}
-+
-+	tmp_data = kmalloc(size * sizeof(u32), GFP_KERNEL);
-+	if (!tmp_data) {
-+		dev_err(ah->dev, "%s tmp_data: alloc filed\n", __func__);
-+		goto error_tmp_data;
-+	}
-+
-+	for (i = 0; i < size; i++)
-+		tmp_reg_list[i] = array[i][0];
-+
-+	REG_READ_MULTI(ah, tmp_reg_list, tmp_data, size);
-+
-+	for (i = 0; i < size; i++)
-+		array[i][1] = tmp_data[i];
-+
-+	kfree(tmp_data);
-+error_tmp_data:
-+	kfree(tmp_reg_list);
-+}
-+
- u32 ath9k_hw_reverse_bits(u32 val, u32 n)
- {
- 	u32 retval;
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -138,6 +138,8 @@
- 
- #define REG_WRITE_ARRAY(iniarray, column, regWr) \
- 	ath9k_hw_write_array(ah, iniarray, column, &(regWr))
-+#define REG_READ_ARRAY(ah, array, size) \
-+	ath9k_hw_read_array(ah, array, size)
- 
- #define AR_GPIO_OUTPUT_MUX_AS_OUTPUT             0
- #define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
-@@ -1020,6 +1022,7 @@ void ath9k_hw_synth_delay(struct ath_hw
- bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
- void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array,
- 			  int column, unsigned int *writecnt);
-+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size);
- u32 ath9k_hw_reverse_bits(u32 val, u32 n);
- u16 ath9k_hw_computetxtime(struct ath_hw *ah,
- 			   u8 phy, int kbps,
diff --git a/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch b/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch
new file mode 100644
index 0000000000..6ce60f1960
--- /dev/null
+++ b/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch
@@ -0,0 +1,32 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 31 Jan 2016 12:14:34 +0100
+Subject: [PATCH] brcmfmac: treat NULL character in NVRAM as separator
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Platform NVRAM (stored on a flash partition) has entries separated by a
+NULL (\0) char. Our parsing code switches from VALUE state to IDLE
+whenever it meets a NULL (\0). When that happens our IDLE handler should
+simply consume it and analyze whatever is placed ahead.
+
+This fixes harmless warnings spamming debugging output:
+[  155.165624] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=20: ignoring invalid character
+[  155.180806] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=44: ignoring invalid character
+[  155.195971] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=63: ignoring invalid character
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+@@ -93,7 +93,7 @@ static enum nvram_parser_state brcmf_nvr
+ 	c = nvp->data[nvp->pos];
+ 	if (c == '\n')
+ 		return COMMENT;
+-	if (is_whitespace(c))
++	if (is_whitespace(c) || c == '\0')
+ 		goto proceed;
+ 	if (c == '#')
+ 		return COMMENT;
diff --git a/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch b/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch
deleted file mode 100644
index 4e4888fd07..0000000000
--- a/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:52 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY
-
-insted of reading each register separatly
-and waste 4ms on each operation, we can
-use one shot read.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -440,8 +440,7 @@ static void ar9271_hw_pa_cal(struct ath_
- 		{ AR9285_AN_RF2G3, 0 },
- 	};
- 
--	for (i = 0; i < ARRAY_SIZE(regList); i++)
--		regList[i][1] = REG_READ(ah, regList[i][0]);
-+	REG_READ_ARRAY(ah, regList, ARRAY_SIZE(regList));
- 
- 	ENABLE_REG_RMW_BUFFER(ah);
- 	/* 7834, b1=0 */
diff --git a/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch b/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch
new file mode 100644
index 0000000000..012dea1e3a
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch
@@ -0,0 +1,41 @@
+From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+Date: Mon, 25 Jan 2016 11:47:29 +0100
+Subject: [PATCH] brcmfmac: sdio: Increase the default timeouts a bit
+
+On a Radxa Rock2 board with a Ampak AP6335 (Broadcom 4339 core) it seems
+the card responds very quickly most of the time, unfortunately during
+initialisation it sometimes seems to take just a bit over 2 seconds to
+respond.
+
+This results intialization failing with message like:
+  brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -52
+  brcmf_bus_start: failed: -52
+  brcmf_sdio_firmware_callback: dongle is not responding
+
+Increasing the timeout to allow for a bit more headroom allows the
+card to initialize reliably.
+
+A quick search online after diagnosing/fixing this showed that Google
+has a similar patch in their ChromeOS tree, so this doesn't seem
+specific to the board I'm using.
+
+Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
+Acked-by: Arend van Spriel <arend@broadcom.com>
+Reviewed-by: Douglas Anderson <dianders@chromium.org>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -45,8 +45,8 @@
+ #include "chip.h"
+ #include "firmware.h"
+ 
+-#define DCMD_RESP_TIMEOUT	msecs_to_jiffies(2000)
+-#define CTL_DONE_TIMEOUT	msecs_to_jiffies(2000)
++#define DCMD_RESP_TIMEOUT	msecs_to_jiffies(2500)
++#define CTL_DONE_TIMEOUT	msecs_to_jiffies(2500)
+ 
+ #ifdef DEBUG
+ 
diff --git a/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch b/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch
new file mode 100644
index 0000000000..71f7a40433
--- /dev/null
+++ b/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch
@@ -0,0 +1,87 @@
+From: Miaoqing Pan <miaoqing@codeaurora.org>
+Date: Fri, 5 Feb 2016 09:45:50 +0800
+Subject: [PATCH] ath9k: make NF load complete quickly and reliably
+
+Make NF load complete quickly and reliably. NF load execution
+is delayed by HW to end of frame if frame Rx or Tx is ongoing.
+Increasing timeout to max frame duration. If NF cal is ongoing
+before NF load, stop it before load, and restart it afterwards.
+
+Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/calib.c
++++ b/drivers/net/wireless/ath/ath9k/calib.c
+@@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+ 	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
+ 	struct ath_common *common = ath9k_hw_common(ah);
+ 	s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
++	u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL);
+ 
+ 	if (ah->caldata)
+ 		h = ah->caldata->nfCalHist;
+@@ -264,6 +265,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+ 	}
+ 
+ 	/*
++	 * stop NF cal if ongoing to ensure NF load completes immediately
++	 * (or after end rx/tx frame if ongoing)
++	 */
++	if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
++		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
++		REG_RMW_BUFFER_FLUSH(ah);
++		ENABLE_REG_RMW_BUFFER(ah);
++	}
++
++	/*
+ 	 * Load software filtered NF value into baseband internal minCCApwr
+ 	 * variable.
+ 	 */
+@@ -276,18 +287,33 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+ 
+ 	/*
+ 	 * Wait for load to complete, should be fast, a few 10s of us.
+-	 * The max delay was changed from an original 250us to 10000us
+-	 * since 250us often results in NF load timeout and causes deaf
+-	 * condition during stress testing 12/12/2009
++	 * The max delay was changed from an original 250us to 22.2 msec.
++	 * This would increase timeout to the longest possible frame
++	 * (11n max length 22.1 msec)
+ 	 */
+-	for (j = 0; j < 10000; j++) {
++	for (j = 0; j < 22200; j++) {
+ 		if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
+-		     AR_PHY_AGC_CONTROL_NF) == 0)
++			      AR_PHY_AGC_CONTROL_NF) == 0)
+ 			break;
+ 		udelay(10);
+ 	}
+ 
+ 	/*
++	 * Restart NF so it can continue.
++	 */
++	if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
++		ENABLE_REG_RMW_BUFFER(ah);
++		if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF)
++			REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
++				    AR_PHY_AGC_CONTROL_ENABLE_NF);
++		if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF)
++			REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
++				    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
++		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
++		REG_RMW_BUFFER_FLUSH(ah);
++	}
++
++	/*
+ 	 * We timed out waiting for the noisefloor to load, probably due to an
+ 	 * in-progress rx. Simply return here and allow the load plenty of time
+ 	 * to complete before the next calibration interval.  We need to avoid
+@@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+ 	 * here, the baseband nf cal will just be capped by our present
+ 	 * noisefloor until the next calibration timer.
+ 	 */
+-	if (j == 10000) {
++	if (j == 22200) {
+ 		ath_dbg(common, ANY,
+ 			"Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
+ 			REG_READ(ah, AR_PHY_AGC_CONTROL));
diff --git a/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch b/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch
deleted file mode 100644
index a22cd1d490..0000000000
--- a/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:53 +0100
-Subject: [PATCH] ath9k: use one shot read in ath9k_hw_update_mibstats
-
-this will reduce some overhead on usb bus.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ani.c
-+++ b/drivers/net/wireless/ath/ath9k/ani.c
-@@ -107,11 +107,21 @@ static const struct ani_cck_level_entry
- static void ath9k_hw_update_mibstats(struct ath_hw *ah,
- 				     struct ath9k_mib_stats *stats)
- {
--	stats->ackrcv_bad += REG_READ(ah, AR_ACK_FAIL);
--	stats->rts_bad += REG_READ(ah, AR_RTS_FAIL);
--	stats->fcs_bad += REG_READ(ah, AR_FCS_FAIL);
--	stats->rts_good += REG_READ(ah, AR_RTS_OK);
--	stats->beacons += REG_READ(ah, AR_BEACON_CNT);
-+	u32 addr[5] = {AR_RTS_OK, AR_RTS_FAIL, AR_ACK_FAIL,
-+		       AR_FCS_FAIL, AR_BEACON_CNT};
-+	u32 data[5];
-+
-+	REG_READ_MULTI(ah, &addr[0], &data[0], 5);
-+	/* AR_RTS_OK */
-+	stats->rts_good += data[0];
-+	/* AR_RTS_FAIL */
-+	stats->rts_bad += data[1];
-+	/* AR_ACK_FAIL */
-+	stats->ackrcv_bad += data[2];
-+	/* AR_FCS_FAIL */
-+	stats->fcs_bad += data[3];
-+	/* AR_BEACON_CNT */
-+	stats->beacons += data[4];
- }
- 
- static void ath9k_ani_restart(struct ath_hw *ah)
diff --git a/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch b/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch
deleted file mode 100644
index e5a362ffa6..0000000000
--- a/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:54 +0100
-Subject: [PATCH] ath9k: ath9k_hw_loadnf: use REG_RMW
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/calib.c
-+++ b/drivers/net/wireless/ath/ath9k/calib.c
-@@ -238,7 +238,6 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- {
- 	struct ath9k_nfcal_hist *h = NULL;
- 	unsigned i, j;
--	int32_t val;
- 	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
- 	struct ath_common *common = ath9k_hw_common(ah);
- 	s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
-@@ -246,6 +245,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 	if (ah->caldata)
- 		h = ah->caldata->nfCalHist;
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	for (i = 0; i < NUM_NF_READINGS; i++) {
- 		if (chainmask & (1 << i)) {
- 			s16 nfval;
-@@ -258,10 +258,8 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 			else
- 				nfval = default_nf;
- 
--			val = REG_READ(ah, ah->nf_regs[i]);
--			val &= 0xFFFFFE00;
--			val |= (((u32) nfval << 1) & 0x1ff);
--			REG_WRITE(ah, ah->nf_regs[i], val);
-+			REG_RMW(ah, ah->nf_regs[i],
-+				(((u32) nfval << 1) & 0x1ff), 0x1ff);
- 		}
- 	}
- 
-@@ -274,6 +272,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 	REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
- 		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
- 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	/*
- 	 * Wait for load to complete, should be fast, a few 10s of us.
-@@ -309,19 +308,17 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 	 * by the median we just loaded.  This will be initial (and max) value
- 	 * of next noise floor calibration the baseband does.
- 	 */
--	ENABLE_REGWRITE_BUFFER(ah);
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	for (i = 0; i < NUM_NF_READINGS; i++) {
- 		if (chainmask & (1 << i)) {
- 			if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan))
- 				continue;
- 
--			val = REG_READ(ah, ah->nf_regs[i]);
--			val &= 0xFFFFFE00;
--			val |= (((u32) (-50) << 1) & 0x1ff);
--			REG_WRITE(ah, ah->nf_regs[i], val);
-+			REG_RMW(ah, ah->nf_regs[i],
-+					(((u32) (-50) << 1) & 0x1ff), 0x1ff);
- 		}
- 	}
--	REGWRITE_BUFFER_FLUSH(ah);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	return 0;
- }
diff --git a/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch b/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch
new file mode 100644
index 0000000000..f7f9df946a
--- /dev/null
+++ b/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch
@@ -0,0 +1,54 @@
+From: Henning Rogge <hrogge@gmail.com>
+Date: Wed, 3 Feb 2016 13:58:36 +0100
+Subject: [PATCH] mac80211: Remove MPP table entries with MPath
+
+Make the mesh_path_del() function remove all mpp table entries
+that are proxied by the removed mesh path.
+
+Acked-by: Bob Copeland <me@bobcopeland.com>
+Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/mesh_pathtbl.c
++++ b/net/mac80211/mesh_pathtbl.c
+@@ -835,6 +835,29 @@ void mesh_path_flush_by_nexthop(struct s
+ 	rcu_read_unlock();
+ }
+ 
++static void mpp_flush_by_proxy(struct ieee80211_sub_if_data *sdata,
++			       const u8 *proxy)
++{
++	struct mesh_table *tbl;
++	struct mesh_path *mpp;
++	struct mpath_node *node;
++	int i;
++
++	rcu_read_lock();
++	read_lock_bh(&pathtbl_resize_lock);
++	tbl = resize_dereference_mpp_paths();
++	for_each_mesh_entry(tbl, node, i) {
++		mpp = node->mpath;
++		if (ether_addr_equal(mpp->mpp, proxy)) {
++			spin_lock(&tbl->hashwlock[i]);
++			__mesh_path_del(tbl, node);
++			spin_unlock(&tbl->hashwlock[i]);
++		}
++	}
++	read_unlock_bh(&pathtbl_resize_lock);
++	rcu_read_unlock();
++}
++
+ static void table_flush_by_iface(struct mesh_table *tbl,
+ 				 struct ieee80211_sub_if_data *sdata)
+ {
+@@ -892,6 +915,9 @@ int mesh_path_del(struct ieee80211_sub_i
+ 	int hash_idx;
+ 	int err = 0;
+ 
++	/* flush relevant mpp entries first */
++	mpp_flush_by_proxy(sdata, addr);
++
+ 	read_lock_bh(&pathtbl_resize_lock);
+ 	tbl = resize_dereference_mesh_paths();
+ 	hash_idx = mesh_table_hash(addr, sdata, tbl);
diff --git a/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch b/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch
deleted file mode 100644
index 01c801123e..0000000000
--- a/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:55 +0100
-Subject: [PATCH] ath9k: write buffer related optimisation in
- ar5008_hw_set_channel_regs
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -681,12 +681,13 @@ static void ar5008_hw_set_channel_regs(s
- 			phymode |= AR_PHY_FC_DYN2040_PRI_CH;
- 
- 	}
-+	ENABLE_REGWRITE_BUFFER(ah);
- 	REG_WRITE(ah, AR_PHY_TURBO, phymode);
- 
-+	/* This function do only REG_WRITE, so
-+	 * we can include it to REGWRITE_BUFFER. */
- 	ath9k_hw_set11nmac2040(ah, chan);
- 
--	ENABLE_REGWRITE_BUFFER(ah);
--
- 	REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
- 	REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
- 
diff --git a/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch b/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch
new file mode 100644
index 0000000000..740993c9e0
--- /dev/null
+++ b/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch
@@ -0,0 +1,104 @@
+From: Henning Rogge <hrogge@gmail.com>
+Date: Wed, 3 Feb 2016 13:58:37 +0100
+Subject: [PATCH] mac80211: let unused MPP table entries timeout
+
+Remember the last time when a mpp table entry is used for
+rx or tx and remove them after MESH_PATH_EXPIRE time.
+
+Acked-by: Bob Copeland <me@bobcopeland.com>
+Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/mesh_pathtbl.c
++++ b/net/mac80211/mesh_pathtbl.c
+@@ -942,6 +942,46 @@ enddel:
+ }
+ 
+ /**
++ * mpp_path_del - delete a mesh proxy path from the table
++ *
++ * @addr: addr address (ETH_ALEN length)
++ * @sdata: local subif
++ *
++ * Returns: 0 if successful
++ */
++static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
++{
++	struct mesh_table *tbl;
++	struct mesh_path *mpath;
++	struct mpath_node *node;
++	struct hlist_head *bucket;
++	int hash_idx;
++	int err = 0;
++
++	read_lock_bh(&pathtbl_resize_lock);
++	tbl = resize_dereference_mpp_paths();
++	hash_idx = mesh_table_hash(addr, sdata, tbl);
++	bucket = &tbl->hash_buckets[hash_idx];
++
++	spin_lock(&tbl->hashwlock[hash_idx]);
++	hlist_for_each_entry(node, bucket, list) {
++		mpath = node->mpath;
++		if (mpath->sdata == sdata &&
++		    ether_addr_equal(addr, mpath->dst)) {
++			__mesh_path_del(tbl, node);
++			goto enddel;
++		}
++	}
++
++	err = -ENXIO;
++enddel:
++	mesh_paths_generation++;
++	spin_unlock(&tbl->hashwlock[hash_idx]);
++	read_unlock_bh(&pathtbl_resize_lock);
++	return err;
++}
++
++/**
+  * mesh_path_tx_pending - sends pending frames in a mesh path queue
+  *
+  * @mpath: mesh path to activate
+@@ -1157,6 +1197,17 @@ void mesh_path_expire(struct ieee80211_s
+ 		     time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE))
+ 			mesh_path_del(mpath->sdata, mpath->dst);
+ 	}
++
++	tbl = rcu_dereference(mpp_paths);
++	for_each_mesh_entry(tbl, node, i) {
++		if (node->mpath->sdata != sdata)
++			continue;
++		mpath = node->mpath;
++		if ((!(mpath->flags & MESH_PATH_FIXED)) &&
++		    time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE))
++			mpp_path_del(mpath->sdata, mpath->dst);
++	}
++
+ 	rcu_read_unlock();
+ }
+ 
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -2291,6 +2291,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
+ 			spin_lock_bh(&mppath->state_lock);
+ 			if (!ether_addr_equal(mppath->mpp, mpp_addr))
+ 				memcpy(mppath->mpp, mpp_addr, ETH_ALEN);
++			mppath->exp_time = jiffies;
+ 			spin_unlock_bh(&mppath->state_lock);
+ 		}
+ 		rcu_read_unlock();
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -2171,8 +2171,11 @@ static struct sk_buff *ieee80211_build_h
+ 					mpp_lookup = true;
+ 			}
+ 
+-			if (mpp_lookup)
++			if (mpp_lookup) {
+ 				mppath = mpp_path_lookup(sdata, skb->data);
++				if (mppath)
++					mppath->exp_time = jiffies;
++			}
+ 
+ 			if (mppath && mpath)
+ 				mesh_path_del(mpath->sdata, mpath->dst);
diff --git a/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch b/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch
deleted file mode 100644
index e5219f281b..0000000000
--- a/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:56 +0100
-Subject: [PATCH] ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -389,6 +389,7 @@ static void ath9k_hw_set_4k_power_cal_ta
- 		}
- 	}
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
- 		      (numXpdGain - 1) & 0x3);
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
-@@ -396,6 +397,7 @@ static void ath9k_hw_set_4k_power_cal_ta
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
- 		      xpdGainValues[1]);
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3, 0);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
- 		regChainOffset = i * 0x1000;
diff --git a/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch b/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch
new file mode 100644
index 0000000000..0c36b1d568
--- /dev/null
+++ b/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch
@@ -0,0 +1,143 @@
+From: Henning Rogge <hrogge@gmail.com>
+Date: Wed, 3 Feb 2016 13:58:38 +0100
+Subject: [PATCH] mac80211: Unify mesh and mpp path removal function
+
+mpp_path_del() and mesh_path_del() are mostly the same function.
+Move common code into a new static function.
+
+Acked-by: Bob Copeland <me@bobcopeland.com>
+Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/mesh_pathtbl.c
++++ b/net/mac80211/mesh_pathtbl.c
+@@ -55,16 +55,21 @@ int mpp_paths_generation;
+ static DEFINE_RWLOCK(pathtbl_resize_lock);
+ 
+ 
++static inline struct mesh_table *resize_dereference_paths(
++	struct mesh_table __rcu *table)
++{
++	return rcu_dereference_protected(table,
++					lockdep_is_held(&pathtbl_resize_lock));
++}
++
+ static inline struct mesh_table *resize_dereference_mesh_paths(void)
+ {
+-	return rcu_dereference_protected(mesh_paths,
+-		lockdep_is_held(&pathtbl_resize_lock));
++	return resize_dereference_paths(mesh_paths);
+ }
+ 
+ static inline struct mesh_table *resize_dereference_mpp_paths(void)
+ {
+-	return rcu_dereference_protected(mpp_paths,
+-		lockdep_is_held(&pathtbl_resize_lock));
++	return resize_dereference_paths(mpp_paths);
+ }
+ 
+ /*
+@@ -899,14 +904,17 @@ void mesh_path_flush_by_iface(struct iee
+ }
+ 
+ /**
+- * mesh_path_del - delete a mesh path from the table
++ * table_path_del - delete a path from the mesh or mpp table
+  *
+- * @addr: dst address (ETH_ALEN length)
++ * @tbl: mesh or mpp path table
+  * @sdata: local subif
++ * @addr: dst address (ETH_ALEN length)
+  *
+  * Returns: 0 if successful
+  */
+-int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
++static int table_path_del(struct mesh_table __rcu *rcu_tbl,
++			  struct ieee80211_sub_if_data *sdata,
++			  const u8 *addr)
+ {
+ 	struct mesh_table *tbl;
+ 	struct mesh_path *mpath;
+@@ -915,11 +923,7 @@ int mesh_path_del(struct ieee80211_sub_i
+ 	int hash_idx;
+ 	int err = 0;
+ 
+-	/* flush relevant mpp entries first */
+-	mpp_flush_by_proxy(sdata, addr);
+-
+-	read_lock_bh(&pathtbl_resize_lock);
+-	tbl = resize_dereference_mesh_paths();
++	tbl = resize_dereference_paths(rcu_tbl);
+ 	hash_idx = mesh_table_hash(addr, sdata, tbl);
+ 	bucket = &tbl->hash_buckets[hash_idx];
+ 
+@@ -935,9 +939,30 @@ int mesh_path_del(struct ieee80211_sub_i
+ 
+ 	err = -ENXIO;
+ enddel:
+-	mesh_paths_generation++;
+ 	spin_unlock(&tbl->hashwlock[hash_idx]);
++	return err;
++}
++
++/**
++ * mesh_path_del - delete a mesh path from the table
++ *
++ * @addr: dst address (ETH_ALEN length)
++ * @sdata: local subif
++ *
++ * Returns: 0 if successful
++ */
++int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
++{
++	int err = 0;
++
++	/* flush relevant mpp entries first */
++	mpp_flush_by_proxy(sdata, addr);
++
++	read_lock_bh(&pathtbl_resize_lock);
++	err = table_path_del(mesh_paths, sdata, addr);
++	mesh_paths_generation++;
+ 	read_unlock_bh(&pathtbl_resize_lock);
++
+ 	return err;
+ }
+ 
+@@ -951,33 +976,13 @@ enddel:
+  */
+ static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
+ {
+-	struct mesh_table *tbl;
+-	struct mesh_path *mpath;
+-	struct mpath_node *node;
+-	struct hlist_head *bucket;
+-	int hash_idx;
+ 	int err = 0;
+ 
+ 	read_lock_bh(&pathtbl_resize_lock);
+-	tbl = resize_dereference_mpp_paths();
+-	hash_idx = mesh_table_hash(addr, sdata, tbl);
+-	bucket = &tbl->hash_buckets[hash_idx];
+-
+-	spin_lock(&tbl->hashwlock[hash_idx]);
+-	hlist_for_each_entry(node, bucket, list) {
+-		mpath = node->mpath;
+-		if (mpath->sdata == sdata &&
+-		    ether_addr_equal(addr, mpath->dst)) {
+-			__mesh_path_del(tbl, node);
+-			goto enddel;
+-		}
+-	}
+-
+-	err = -ENXIO;
+-enddel:
+-	mesh_paths_generation++;
+-	spin_unlock(&tbl->hashwlock[hash_idx]);
++	err = table_path_del(mpp_paths, sdata, addr);
++	mpp_paths_generation++;
+ 	read_unlock_bh(&pathtbl_resize_lock);
++
+ 	return err;
+ }
+ 
diff --git a/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch b/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch
deleted file mode 100644
index 6ce3f40f05..0000000000
--- a/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:57 +0100
-Subject: [PATCH] ath9k: use rmw buffer in ath9k_hw_set_operating_mode
- and ath9k_hw_reset
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1227,6 +1227,7 @@ static void ath9k_hw_set_operating_mode(
- 	u32 mask = AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC;
- 	u32 set = AR_STA_ID1_KSRCH_MODE;
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	switch (opmode) {
- 	case NL80211_IFTYPE_ADHOC:
- 		if (!AR_SREV_9340_13(ah)) {
-@@ -1248,6 +1249,7 @@ static void ath9k_hw_set_operating_mode(
- 		break;
- 	}
- 	REG_RMW(ah, AR_STA_ID1, set, mask);
-+	REG_RMW_BUFFER_FLUSH(ah);
- }
- 
- void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
-@@ -1960,6 +1962,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
- 	if (!ath9k_hw_mci_is_enabled(ah))
- 		REG_WRITE(ah, AR_OBS, 8);
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	if (ah->config.rx_intr_mitigation) {
- 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, ah->config.rimt_last);
- 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, ah->config.rimt_first);
-@@ -1969,6 +1972,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
- 		REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_LAST, 300);
- 		REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_FIRST, 750);
- 	}
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	ath9k_hw_init_bb(ah, chan);
- 
diff --git a/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch b/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch
new file mode 100644
index 0000000000..4dc6d663ed
--- /dev/null
+++ b/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch
@@ -0,0 +1,51 @@
+From: Sven Eckelmann <sven.eckelmann@open-mesh.com>
+Date: Tue, 2 Feb 2016 08:12:26 +0100
+Subject: [PATCH] mac80211: minstrel: Change expected throughput unit back to
+ Kbps
+
+The change from cur_tp to the function
+minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the
+current throughput. For example in minstrel_ht the correct
+conversion between them would be:
+
+    mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..).
+
+This factor 10 must also be included in the calculation of
+minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to
+return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing
+algorithms like B.A.T.M.A.N. V will make incorrect decision based on these
+values. Its kernel based implementation expects expected_throughput always
+to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps].
+
+The same requirement has iw or olsrdv2's nl80211 based statistics module
+which retrieve the same data via NL80211_STA_INFO_TX_BITRATE.
+
+Cc: stable@vger.kernel.org
+Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function")
+Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/rc80211_minstrel.c
++++ b/net/mac80211/rc80211_minstrel.c
+@@ -711,7 +711,7 @@ static u32 minstrel_get_expected_through
+ 	 * computing cur_tp
+ 	 */
+ 	tmp_mrs = &mi->r[idx].stats;
+-	tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma);
++	tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma) * 10;
+ 	tmp_cur_tp = tmp_cur_tp * 1200 * 8 / 1024;
+ 
+ 	return tmp_cur_tp;
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -1335,7 +1335,8 @@ static u32 minstrel_ht_get_expected_thro
+ 	prob = mi->groups[i].rates[j].prob_ewma;
+ 
+ 	/* convert tp_avg from pkt per second in kbps */
+-	tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * AVG_PKT_SIZE * 8 / 1024;
++	tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * 10;
++	tp_avg = tp_avg * AVG_PKT_SIZE * 8 / 1024;
+ 
+ 	return tp_avg;
+ }
diff --git a/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch b/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch
deleted file mode 100644
index edd6160fa6..0000000000
--- a/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:58 +0100
-Subject: [PATCH] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -1082,6 +1082,7 @@ static void ath9k_hw_4k_set_board_values
- 		mask = BIT(0)|BIT(5)|BIT(10)|BIT(15)|BIT(20)|BIT(25);
- 		pwrctrl = mask * bb_desired_scale;
- 		clr = mask * 0x1f;
-+		ENABLE_REG_RMW_BUFFER(ah);
- 		REG_RMW(ah, AR_PHY_TX_PWRCTRL8, pwrctrl, clr);
- 		REG_RMW(ah, AR_PHY_TX_PWRCTRL10, pwrctrl, clr);
- 		REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL12, pwrctrl, clr);
-@@ -1096,6 +1097,7 @@ static void ath9k_hw_4k_set_board_values
- 		clr = mask * 0x1f;
- 		REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL11, pwrctrl, clr);
- 		REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL13, pwrctrl, clr);
-+		REG_RMW_BUFFER_FLUSH(ah);
- 	}
- }
- 
diff --git a/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch b/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch
new file mode 100644
index 0000000000..1fd016f7f6
--- /dev/null
+++ b/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch
@@ -0,0 +1,307 @@
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Sun, 7 Feb 2016 18:08:24 +0100
+Subject: [PATCH] brcmfmac: Increase nr of supported flowrings.
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+New generation devices have firmware which has more than 256 flowrings.
+E.g. following debugging message comes from 14e4:4365 BCM4366:
+[  194.606245] brcmfmac: brcmf_pcie_init_ringbuffers Nr of flowrings is 264
+
+At various code places (related to flowrings) we were using u8 which
+could lead to storing wrong number or infinite loops when indexing with
+this type. This issue was quite easy to spot in brcmf_flowring_detach
+where it led to infinite loop e.g. on failed initialization.
+
+This patch switches code to proper types and increases the maximum
+number of supported flowrings to 512.
+
+Originally this change was sent in September 2015, but back it was
+causing a regression on BCM43602 resulting in:
+Unable to handle kernel NULL pointer dereference at virtual address ...
+
+The reason for this regression was missing update (s/u8/u16) of struct
+brcmf_flowring_ring. This problem was handled in 9f64df9 ("brcmfmac: Fix
+bug in flowring management."). Starting with that it's safe to apply
+this original patch as it doesn't cause a regression anymore.
+
+This patch fixes an infinite loop on BCM4366 which is supported since
+4.4 so it makes sense to apply it to stable 4.4+.
+
+Cc: <stable@vger.kernel.org> # 4.4+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c
+@@ -32,7 +32,7 @@
+ #define BRCMF_FLOWRING_LOW		(BRCMF_FLOWRING_HIGH - 256)
+ #define BRCMF_FLOWRING_INVALID_IFIDX	0xff
+ 
+-#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] + fifo + ifidx * 16)
++#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] * 2 + fifo + ifidx * 16)
+ #define BRCMF_FLOWRING_HASH_STA(fifo, ifidx) (fifo + ifidx * 16)
+ 
+ static const u8 brcmf_flowring_prio2fifo[] = {
+@@ -68,7 +68,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f
+ 			  u8 prio, u8 ifidx)
+ {
+ 	struct brcmf_flowring_hash *hash;
+-	u8 hash_idx;
++	u16 hash_idx;
+ 	u32 i;
+ 	bool found;
+ 	bool sta;
+@@ -88,6 +88,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f
+ 	}
+ 	hash_idx =  sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) :
+ 			  BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx);
++	hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
+ 	found = false;
+ 	hash = flow->hash;
+ 	for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) {
+@@ -98,6 +99,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f
+ 			break;
+ 		}
+ 		hash_idx++;
++		hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
+ 	}
+ 	if (found)
+ 		return hash[hash_idx].flowid;
+@@ -111,7 +113,7 @@ u32 brcmf_flowring_create(struct brcmf_f
+ {
+ 	struct brcmf_flowring_ring *ring;
+ 	struct brcmf_flowring_hash *hash;
+-	u8 hash_idx;
++	u16 hash_idx;
+ 	u32 i;
+ 	bool found;
+ 	u8 fifo;
+@@ -131,6 +133,7 @@ u32 brcmf_flowring_create(struct brcmf_f
+ 	}
+ 	hash_idx =  sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) :
+ 			  BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx);
++	hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
+ 	found = false;
+ 	hash = flow->hash;
+ 	for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) {
+@@ -140,6 +143,7 @@ u32 brcmf_flowring_create(struct brcmf_f
+ 			break;
+ 		}
+ 		hash_idx++;
++		hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
+ 	}
+ 	if (found) {
+ 		for (i = 0; i < flow->nrofrings; i++) {
+@@ -169,7 +173,7 @@ u32 brcmf_flowring_create(struct brcmf_f
+ }
+ 
+ 
+-u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid)
++u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid)
+ {
+ 	struct brcmf_flowring_ring *ring;
+ 
+@@ -179,7 +183,7 @@ u8 brcmf_flowring_tid(struct brcmf_flowr
+ }
+ 
+ 
+-static void brcmf_flowring_block(struct brcmf_flowring *flow, u8 flowid,
++static void brcmf_flowring_block(struct brcmf_flowring *flow, u16 flowid,
+ 				 bool blocked)
+ {
+ 	struct brcmf_flowring_ring *ring;
+@@ -228,10 +232,10 @@ static void brcmf_flowring_block(struct
+ }
+ 
+ 
+-void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid)
++void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid)
+ {
+ 	struct brcmf_flowring_ring *ring;
+-	u8 hash_idx;
++	u16 hash_idx;
+ 	struct sk_buff *skb;
+ 
+ 	ring = flow->rings[flowid];
+@@ -253,7 +257,7 @@ void brcmf_flowring_delete(struct brcmf_
+ }
+ 
+ 
+-u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
++u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid,
+ 			   struct sk_buff *skb)
+ {
+ 	struct brcmf_flowring_ring *ring;
+@@ -279,7 +283,7 @@ u32 brcmf_flowring_enqueue(struct brcmf_
+ }
+ 
+ 
+-struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid)
++struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid)
+ {
+ 	struct brcmf_flowring_ring *ring;
+ 	struct sk_buff *skb;
+@@ -300,7 +304,7 @@ struct sk_buff *brcmf_flowring_dequeue(s
+ }
+ 
+ 
+-void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid,
++void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid,
+ 			     struct sk_buff *skb)
+ {
+ 	struct brcmf_flowring_ring *ring;
+@@ -311,7 +315,7 @@ void brcmf_flowring_reinsert(struct brcm
+ }
+ 
+ 
+-u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid)
++u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid)
+ {
+ 	struct brcmf_flowring_ring *ring;
+ 
+@@ -326,7 +330,7 @@ u32 brcmf_flowring_qlen(struct brcmf_flo
+ }
+ 
+ 
+-void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid)
++void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid)
+ {
+ 	struct brcmf_flowring_ring *ring;
+ 
+@@ -340,10 +344,10 @@ void brcmf_flowring_open(struct brcmf_fl
+ }
+ 
+ 
+-u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid)
++u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid)
+ {
+ 	struct brcmf_flowring_ring *ring;
+-	u8 hash_idx;
++	u16 hash_idx;
+ 
+ 	ring = flow->rings[flowid];
+ 	hash_idx = ring->hash_id;
+@@ -384,7 +388,7 @@ void brcmf_flowring_detach(struct brcmf_
+ 	struct brcmf_pub *drvr = bus_if->drvr;
+ 	struct brcmf_flowring_tdls_entry *search;
+ 	struct brcmf_flowring_tdls_entry *remove;
+-	u8 flowid;
++	u16 flowid;
+ 
+ 	for (flowid = 0; flowid < flow->nrofrings; flowid++) {
+ 		if (flow->rings[flowid])
+@@ -408,7 +412,7 @@ void brcmf_flowring_configure_addr_mode(
+ 	struct brcmf_bus *bus_if = dev_get_drvdata(flow->dev);
+ 	struct brcmf_pub *drvr = bus_if->drvr;
+ 	u32 i;
+-	u8 flowid;
++	u16 flowid;
+ 
+ 	if (flow->addr_mode[ifidx] != addr_mode) {
+ 		for (i = 0; i < ARRAY_SIZE(flow->hash); i++) {
+@@ -434,7 +438,7 @@ void brcmf_flowring_delete_peer(struct b
+ 	struct brcmf_flowring_tdls_entry *prev;
+ 	struct brcmf_flowring_tdls_entry *search;
+ 	u32 i;
+-	u8 flowid;
++	u16 flowid;
+ 	bool sta;
+ 
+ 	sta = (flow->addr_mode[ifidx] == ADDR_INDIRECT);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h
+@@ -16,7 +16,7 @@
+ #define BRCMFMAC_FLOWRING_H
+ 
+ 
+-#define BRCMF_FLOWRING_HASHSIZE		256
++#define BRCMF_FLOWRING_HASHSIZE		512		/* has to be 2^x */
+ #define BRCMF_FLOWRING_INVALID_ID	0xFFFFFFFF
+ 
+ 
+@@ -24,7 +24,7 @@ struct brcmf_flowring_hash {
+ 	u8 mac[ETH_ALEN];
+ 	u8 fifo;
+ 	u8 ifidx;
+-	u8 flowid;
++	u16 flowid;
+ };
+ 
+ enum ring_status {
+@@ -61,16 +61,16 @@ u32 brcmf_flowring_lookup(struct brcmf_f
+ 			  u8 prio, u8 ifidx);
+ u32 brcmf_flowring_create(struct brcmf_flowring *flow, u8 da[ETH_ALEN],
+ 			  u8 prio, u8 ifidx);
+-void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid);
+-void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid);
+-u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid);
+-u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
++void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid);
++void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid);
++u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid);
++u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid,
+ 			   struct sk_buff *skb);
+-struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid);
+-void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid,
++struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid);
++void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid,
+ 			     struct sk_buff *skb);
+-u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid);
+-u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid);
++u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid);
++u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid);
+ struct brcmf_flowring *brcmf_flowring_attach(struct device *dev, u16 nrofrings);
+ void brcmf_flowring_detach(struct brcmf_flowring *flow);
+ void brcmf_flowring_configure_addr_mode(struct brcmf_flowring *flow, int ifidx,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+@@ -677,7 +677,7 @@ static u32 brcmf_msgbuf_flowring_create(
+ }
+ 
+ 
+-static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u8 flowid)
++static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid)
+ {
+ 	struct brcmf_flowring *flow = msgbuf->flow;
+ 	struct brcmf_commonring *commonring;
+@@ -1310,7 +1310,7 @@ int brcmf_proto_msgbuf_rx_trigger(struct
+ }
+ 
+ 
+-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid)
++void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid)
+ {
+ 	struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd;
+ 	struct msgbuf_tx_flowring_delete_req *delete;
+@@ -1415,6 +1415,13 @@ int brcmf_proto_msgbuf_attach(struct brc
+ 	u32 count;
+ 
+ 	if_msgbuf = drvr->bus_if->msgbuf;
++
++	if (if_msgbuf->nrof_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
++		brcmf_err("driver not configured for this many flowrings %d\n",
++			  if_msgbuf->nrof_flowrings);
++		if_msgbuf->nrof_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
++	}
++
+ 	msgbuf = kzalloc(sizeof(*msgbuf), GFP_KERNEL);
+ 	if (!msgbuf)
+ 		goto fail;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
+@@ -33,7 +33,7 @@
+ 
+ 
+ int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
+-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
++void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid);
+ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr);
+ void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr);
+ #else
diff --git a/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch b/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch
deleted file mode 100644
index 3ce4428f56..0000000000
--- a/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:59 +0100
-Subject: [PATCH] ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW
-
-use REG_RMW in ath9k_hw_analog_shift_rmw.
-It will double execution speed on usb bus.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
-@@ -27,12 +27,7 @@ void ath9k_hw_analog_shift_regwrite(stru
- void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask,
- 			       u32 shift, u32 val)
- {
--	u32 regVal;
--
--	regVal = REG_READ(ah, reg) & ~mask;
--	regVal |= (val << shift) & mask;
--
--	REG_WRITE(ah, reg, regVal);
-+	REG_RMW(ah, reg, ((val << shift) & mask), mask);
- 
- 	if (ah->config.analog_shiftreg)
- 		udelay(100);
diff --git a/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch b/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch
new file mode 100644
index 0000000000..e414f23784
--- /dev/null
+++ b/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Mon, 8 Feb 2016 14:24:36 +0100
+Subject: [PATCH] cfg80211: fix faulty variable initialization in
+ ieee80211_amsdu_to_8023s
+
+reuse_skb is set to true if the code decides to use the last segment.
+Fixes a memory leak
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/wireless/util.c
++++ b/net/wireless/util.c
+@@ -676,7 +676,7 @@ void ieee80211_amsdu_to_8023s(struct sk_
+ 	u8 *payload;
+ 	int offset = 0, remaining, err;
+ 	struct ethhdr eth;
+-	bool reuse_skb = true;
++	bool reuse_skb = false;
+ 	bool last = false;
+ 
+ 	if (has_80211_header) {
diff --git a/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch b/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch
deleted file mode 100644
index 8f12b36454..0000000000
--- a/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:30:01 +0100
-Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in
- ath9k_hw_4k_set_gain
-
-it is possible to reduce time needed for this function
-by rplacing REG_WRITE with REG_RMW (plus dummy 0) and putt all commands
-in same buffer.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -772,15 +772,14 @@ static void ath9k_hw_4k_set_gain(struct
- 				 struct ar5416_eeprom_4k *eep,
- 				 u8 txRxAttenLocal)
- {
--	REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0,
--		  pModal->antCtrlChain[0]);
--
--	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0),
--		  (REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) &
--		   ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
--		     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
--		  SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
--		  SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
-+	ENABLE_REG_RMW_BUFFER(ah);
-+	REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0,
-+		pModal->antCtrlChain[0], 0);
-+
-+	REG_RMW(ah, AR_PHY_TIMING_CTRL4(0),
-+		SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
-+		SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF),
-+		AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF);
- 
- 	if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- 	    AR5416_EEP_MINOR_VER_3) {
-@@ -819,6 +818,7 @@ static void ath9k_hw_4k_set_gain(struct
- 		      AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
- 	REG_RMW_FIELD(ah, AR_PHY_RXGAIN + 0x1000,
- 		      AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
-+	REG_RMW_BUFFER_FLUSH(ah);
- }
- 
- /*
diff --git a/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch b/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch
new file mode 100644
index 0000000000..6e2d0cf5b0
--- /dev/null
+++ b/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch
@@ -0,0 +1,132 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Mon, 8 Feb 2016 14:33:19 +0100
+Subject: [PATCH] cfg80211: reuse existing page fragments in A-MSDU rx
+
+This massively reduces data copying and thus improves rx performance
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/wireless/util.c
++++ b/net/wireless/util.c
+@@ -644,23 +644,93 @@ int ieee80211_data_from_8023(struct sk_b
+ }
+ EXPORT_SYMBOL(ieee80211_data_from_8023);
+ 
++static void
++__frame_add_frag(struct sk_buff *skb, struct page *page,
++		 void *ptr, int len, int size)
++{
++	struct skb_shared_info *sh = skb_shinfo(skb);
++	int page_offset;
++
++	atomic_inc(&page->_count);
++	page_offset = ptr - page_address(page);
++	skb_add_rx_frag(skb, sh->nr_frags, page, page_offset, len, size);
++}
++
++static void
++__ieee80211_amsdu_copy_frag(struct sk_buff *skb, struct sk_buff *frame,
++			    int offset, int len)
++{
++	struct skb_shared_info *sh = skb_shinfo(skb);
++	const skb_frag_t *frag = &sh->frags[-1];
++	struct page *frag_page;
++	void *frag_ptr;
++	int frag_len, frag_size;
++	int head_size = skb->len - skb->data_len;
++	int cur_len;
++
++	frag_page = virt_to_head_page(skb->head);
++	frag_ptr = skb->data;
++	frag_size = head_size;
++
++	while (offset >= frag_size) {
++		offset -= frag_size;
++		frag++;
++		frag_page = skb_frag_page(frag);
++		frag_ptr = skb_frag_address(frag);
++		frag_size = skb_frag_size(frag);
++	}
++
++	frag_ptr += offset;
++	frag_len = frag_size - offset;
++
++	cur_len = min(len, frag_len);
++
++	__frame_add_frag(frame, frag_page, frag_ptr, cur_len, frag_size);
++	len -= cur_len;
++
++	while (len > 0) {
++		frag++;
++		frag_len = skb_frag_size(frag);
++		cur_len = min(len, frag_len);
++		__frame_add_frag(frame, skb_frag_page(frag),
++				 skb_frag_address(frag), cur_len, frag_len);
++		len -= cur_len;
++	}
++}
++
+ static struct sk_buff *
+ __ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen,
+-		       int offset, int len)
++		       int offset, int len, bool reuse_frag)
+ {
+ 	struct sk_buff *frame;
++	int cur_len = len;
+ 
+ 	if (skb->len - offset < len)
+ 		return NULL;
+ 
+ 	/*
++	 * When reusing framents, copy some data to the head to simplify
++	 * ethernet header handling and speed up protocol header processing
++	 * in the stack later.
++	 */
++	if (reuse_frag)
++		cur_len = min_t(int, len, 32);
++
++	/*
+ 	 * Allocate and reserve two bytes more for payload
+ 	 * alignment since sizeof(struct ethhdr) is 14.
+ 	 */
+-	frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len);
++	frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + cur_len);
+ 
+ 	skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
+-	skb_copy_bits(skb, offset, skb_put(frame, len), len);
++	skb_copy_bits(skb, offset, skb_put(frame, cur_len), cur_len);
++
++	len -= cur_len;
++	if (!len)
++		return frame;
++
++	offset += cur_len;
++	__ieee80211_amsdu_copy_frag(skb, frame, offset, len);
+ 
+ 	return frame;
+ }
+@@ -676,6 +746,7 @@ void ieee80211_amsdu_to_8023s(struct sk_
+ 	u8 *payload;
+ 	int offset = 0, remaining, err;
+ 	struct ethhdr eth;
++	bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb);
+ 	bool reuse_skb = false;
+ 	bool last = false;
+ 
+@@ -703,12 +774,13 @@ void ieee80211_amsdu_to_8023s(struct sk_
+ 		offset += sizeof(struct ethhdr);
+ 		/* reuse skb for the last subframe */
+ 		last = remaining <= subframe_len + padding;
+-		if (!skb_is_nonlinear(skb) && last) {
++		if (!skb_is_nonlinear(skb) && !reuse_frag && last) {
+ 			skb_pull(skb, offset);
+ 			frame = skb;
+ 			reuse_skb = true;
+ 		} else {
+-			frame = __ieee80211_amsdu_copy(skb, hlen, offset, len);
++			frame = __ieee80211_amsdu_copy(skb, hlen, offset, len,
++						       reuse_frag);
+ 			if (!frame)
+ 				goto purge;
+ 
diff --git a/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch b/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch
deleted file mode 100644
index f26e059cf0..0000000000
--- a/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:30:03 +0100
-Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in
- ath9k_hw_def_set_gain
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
-@@ -466,6 +466,7 @@ static void ath9k_hw_def_set_gain(struct
- 				  struct ar5416_eeprom_def *eep,
- 				  u8 txRxAttenLocal, int regChainOffset, int i)
- {
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
- 		txRxAttenLocal = pModal->txRxAttenCh[i];
- 
-@@ -483,16 +484,12 @@ static void ath9k_hw_def_set_gain(struct
- 			      AR_PHY_GAIN_2GHZ_XATTEN2_DB,
- 			      pModal->xatten2Db[i]);
- 		} else {
--			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
--			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
--			   ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
--			  | SM(pModal-> bswMargin[i],
--			       AR_PHY_GAIN_2GHZ_BSW_MARGIN));
--			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
--			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
--			   ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
--			  | SM(pModal->bswAtten[i],
--			       AR_PHY_GAIN_2GHZ_BSW_ATTEN));
-+			REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+				SM(pModal-> bswMargin[i], AR_PHY_GAIN_2GHZ_BSW_MARGIN),
-+				AR_PHY_GAIN_2GHZ_BSW_MARGIN);
-+			REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+				SM(pModal->bswAtten[i], AR_PHY_GAIN_2GHZ_BSW_ATTEN),
-+				AR_PHY_GAIN_2GHZ_BSW_ATTEN);
- 		}
- 	}
- 
-@@ -504,17 +501,14 @@ static void ath9k_hw_def_set_gain(struct
- 		      AR_PHY_RXGAIN + regChainOffset,
- 		      AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]);
- 	} else {
--		REG_WRITE(ah,
--			  AR_PHY_RXGAIN + regChainOffset,
--			  (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) &
--			   ~AR_PHY_RXGAIN_TXRX_ATTEN)
--			  | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN));
--		REG_WRITE(ah,
--			  AR_PHY_GAIN_2GHZ + regChainOffset,
--			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
--			   ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
--			  SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
-+		REG_RMW(ah, AR_PHY_RXGAIN + regChainOffset,
-+			SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN),
-+			AR_PHY_RXGAIN_TXRX_ATTEN);
-+		REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+			SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN),
-+			AR_PHY_GAIN_2GHZ_RXTX_MARGIN);
- 	}
-+	REG_RMW_BUFFER_FLUSH(ah);
- }
- 
- static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
diff --git a/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch b/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch
new file mode 100644
index 0000000000..f8f4f0999d
--- /dev/null
+++ b/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch
@@ -0,0 +1,36 @@
+From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+Date: Wed, 10 Feb 2016 16:08:17 +0100
+Subject: [PATCH] mac80211: fix wiphy supported_band access
+
+Fix wiphy supported_band access in tx radiotap parsing. In particular,
+info->band is always set to 0 (IEEE80211_BAND_2GHZ) since it has not
+assigned yet. This cause a kernel crash on 5GHz only devices.
+Move ieee80211_parse_tx_radiotap() after info->band assignment
+
+Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1890,10 +1890,6 @@ netdev_tx_t ieee80211_monitor_start_xmit
+ 	info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
+ 		      IEEE80211_TX_CTL_INJECTED;
+ 
+-	/* process and remove the injection radiotap header */
+-	if (!ieee80211_parse_tx_radiotap(local, skb))
+-		goto fail;
+-
+ 	rcu_read_lock();
+ 
+ 	/*
+@@ -1955,6 +1951,10 @@ netdev_tx_t ieee80211_monitor_start_xmit
+ 		goto fail_rcu;
+ 
+ 	info->band = chandef->chan->band;
++	/* process and remove the injection radiotap header */
++	if (!ieee80211_parse_tx_radiotap(local, skb))
++		goto fail_rcu;
++
+ 	ieee80211_xmit(sdata, NULL, skb);
+ 	rcu_read_unlock();
+ 
diff --git a/package/kernel/mac80211/patches/335-0001-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch b/package/kernel/mac80211/patches/335-0001-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch
deleted file mode 100644
index 5e63a803b0..0000000000
--- a/package/kernel/mac80211/patches/335-0001-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:38 +0100
-Subject: [PATCH] brcmfmac: Fix oops when SDIO device is removed.
-
-On removal of SDIO card both functions of card will be getting
-a remove call. When the first is hanging in ctrl frame xmit then
-the second will cause oops. This patch fixes the xmit ctrl
-handling in case of serious errors and also limits the handling
-for remove to function 1 only.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1194,7 +1194,7 @@ static void brcmf_ops_sdio_remove(struct
- 	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- 	brcmf_dbg(SDIO, "Function: %d\n", func->num);
- 
--	if (func->num != 1 && func->num != 2)
-+	if (func->num != 1)
- 		return;
- 
- 	bus_if = dev_get_drvdata(&func->dev);
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2740,6 +2740,11 @@ static void brcmf_sdio_dpc(struct brcmf_
- 	if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) {
- 		brcmf_err("failed backplane access over SDIO, halting operation\n");
- 		atomic_set(&bus->intstatus, 0);
-+		if (bus->ctrl_frame_stat) {
-+			bus->ctrl_frame_err = -ENODEV;
-+			bus->ctrl_frame_stat = false;
-+			brcmf_sdio_wait_event_wakeup(bus);
-+		}
- 	} else if (atomic_read(&bus->intstatus) ||
- 		   atomic_read(&bus->ipend) > 0 ||
- 		   (!atomic_read(&bus->fcstate) &&
diff --git a/package/kernel/mac80211/patches/335-0002-brcmfmac-Simplify-watchdog-sleep.patch b/package/kernel/mac80211/patches/335-0002-brcmfmac-Simplify-watchdog-sleep.patch
deleted file mode 100644
index 201da75bfc..0000000000
--- a/package/kernel/mac80211/patches/335-0002-brcmfmac-Simplify-watchdog-sleep.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:39 +0100
-Subject: [PATCH] brcmfmac: Simplify watchdog sleep.
-
-The watchdog thread is used to put the SDIO bus to sleep when the
-system is idling. This patch simplifies the way it is determined
-when sleep can be entered.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -485,10 +485,9 @@ struct brcmf_sdio {
- #endif				/* DEBUG */
- 
- 	uint clkstate;		/* State of sd and backplane clock(s) */
--	bool activity;		/* Activity flag for clock down */
- 	s32 idletime;		/* Control for activity timeout */
--	s32 idlecount;	/* Activity timeout counter */
--	s32 idleclock;	/* How to set bus driver when idle */
-+	s32 idlecount;		/* Activity timeout counter */
-+	s32 idleclock;		/* How to set bus driver when idle */
- 	bool rxflow_mode;	/* Rx flow control mode */
- 	bool rxflow;		/* Is rx flow control on */
- 	bool alp_only;		/* Don't use HT clock (ALP only) */
-@@ -511,6 +510,7 @@ struct brcmf_sdio {
- 	struct workqueue_struct *brcmf_wq;
- 	struct work_struct datawork;
- 	atomic_t dpc_tskcnt;
-+	atomic_t dpc_running;
- 
- 	bool txoff;		/* Transmit flow-controlled */
- 	struct brcmf_sdio_count sdcnt;
-@@ -959,13 +959,8 @@ static int brcmf_sdio_clkctl(struct brcm
- 	brcmf_dbg(SDIO, "Enter\n");
- 
- 	/* Early exit if we're already there */
--	if (bus->clkstate == target) {
--		if (target == CLK_AVAIL) {
--			brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
--			bus->activity = true;
--		}
-+	if (bus->clkstate == target)
- 		return 0;
--	}
- 
- 	switch (target) {
- 	case CLK_AVAIL:
-@@ -975,7 +970,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 		/* Now request HT Avail on the backplane */
- 		brcmf_sdio_htclk(bus, true, pendok);
- 		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
--		bus->activity = true;
- 		break;
- 
- 	case CLK_SDONLY:
-@@ -1024,17 +1018,6 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
- 
- 		/* Going to sleep */
- 		if (sleep) {
--			/* Don't sleep if something is pending */
--			if (atomic_read(&bus->intstatus) ||
--			    atomic_read(&bus->ipend) > 0 ||
--			    bus->ctrl_frame_stat ||
--			    (!atomic_read(&bus->fcstate) &&
--			    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
--			    data_ok(bus))) {
--				 err = -EBUSY;
--				 goto done;
--			}
--
- 			clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
- 						   SBSDIO_FUNC1_CHIPCLKCSR,
- 						   &err);
-@@ -1045,11 +1028,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
- 						  SBSDIO_ALP_AVAIL_REQ, &err);
- 			}
- 			err = brcmf_sdio_kso_control(bus, false);
--			/* disable watchdog */
--			if (!err)
--				brcmf_sdio_wd_timer(bus, 0);
- 		} else {
--			bus->idlecount = 0;
- 			err = brcmf_sdio_kso_control(bus, true);
- 		}
- 		if (err) {
-@@ -3566,7 +3545,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- 	queue_work(bus->brcmf_wq, &bus->datawork);
- }
- 
--static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
-+static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
- {
- 	brcmf_dbg(TIMER, "Enter\n");
- 
-@@ -3627,22 +3606,21 @@ static bool brcmf_sdio_bus_watchdog(stru
- #endif				/* DEBUG */
- 
- 	/* On idle timeout clear activity flag and/or turn off clock */
--	if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
--		if (++bus->idlecount >= bus->idletime) {
-+	if ((atomic_read(&bus->dpc_tskcnt) == 0) &&
-+	    (atomic_read(&bus->dpc_running) == 0) &&
-+	    (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
-+		bus->idlecount++;
-+		if (bus->idlecount > bus->idletime) {
-+			brcmf_dbg(SDIO, "idle\n");
-+			sdio_claim_host(bus->sdiodev->func[1]);
-+			brcmf_sdio_wd_timer(bus, 0);
- 			bus->idlecount = 0;
--			if (bus->activity) {
--				bus->activity = false;
--				brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
--			} else {
--				brcmf_dbg(SDIO, "idle\n");
--				sdio_claim_host(bus->sdiodev->func[1]);
--				brcmf_sdio_bus_sleep(bus, true, false);
--				sdio_release_host(bus->sdiodev->func[1]);
--			}
-+			brcmf_sdio_bus_sleep(bus, true, false);
-+			sdio_release_host(bus->sdiodev->func[1]);
- 		}
-+	} else {
-+		bus->idlecount = 0;
- 	}
--
--	return (atomic_read(&bus->ipend) > 0);
- }
- 
- static void brcmf_sdio_dataworker(struct work_struct *work)
-@@ -3651,8 +3629,11 @@ static void brcmf_sdio_dataworker(struct
- 					      datawork);
- 
- 	while (atomic_read(&bus->dpc_tskcnt)) {
-+		atomic_set(&bus->dpc_running, 1);
- 		atomic_set(&bus->dpc_tskcnt, 0);
- 		brcmf_sdio_dpc(bus);
-+		bus->idlecount = 0;
-+		atomic_set(&bus->dpc_running, 0);
- 	}
- 	if (brcmf_sdiod_freezing(bus->sdiodev)) {
- 		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
-@@ -4154,6 +4135,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- 	}
- 	/* Initialize DPC thread */
- 	atomic_set(&bus->dpc_tskcnt, 0);
-+	atomic_set(&bus->dpc_running, 0);
- 
- 	/* Assign bus interface call back */
- 	bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
diff --git a/package/kernel/mac80211/patches/335-0003-brcmfmac-Fix-possible-race-condition.patch b/package/kernel/mac80211/patches/335-0003-brcmfmac-Fix-possible-race-condition.patch
deleted file mode 100644
index 3a2de7a944..0000000000
--- a/package/kernel/mac80211/patches/335-0003-brcmfmac-Fix-possible-race-condition.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:40 +0100
-Subject: [PATCH] brcmfmac: Fix possible race-condition.
-
-SDIO is using a "shared" variable to handoff ctl frames to DPC
-and to see when they are done. In a timeout situation this can
-lead to erroneous situation where DPC started to handle the ctl
-frame while the timeout expired. This patch will fix this by
-adding locking around the shared variable.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2700,11 +2700,13 @@ static void brcmf_sdio_dpc(struct brcmf_
- 	if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
- 	    data_ok(bus)) {
- 		sdio_claim_host(bus->sdiodev->func[1]);
--		err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
--					      bus->ctrl_frame_len);
-+		if (bus->ctrl_frame_stat) {
-+			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
-+						      bus->ctrl_frame_len);
-+			bus->ctrl_frame_err = err;
-+			bus->ctrl_frame_stat = false;
-+		}
- 		sdio_release_host(bus->sdiodev->func[1]);
--		bus->ctrl_frame_err = err;
--		bus->ctrl_frame_stat = false;
- 		brcmf_sdio_wait_event_wakeup(bus);
- 	}
- 	/* Send queued frames (limit 1 if rx may still be pending) */
-@@ -2720,9 +2722,13 @@ static void brcmf_sdio_dpc(struct brcmf_
- 		brcmf_err("failed backplane access over SDIO, halting operation\n");
- 		atomic_set(&bus->intstatus, 0);
- 		if (bus->ctrl_frame_stat) {
--			bus->ctrl_frame_err = -ENODEV;
--			bus->ctrl_frame_stat = false;
--			brcmf_sdio_wait_event_wakeup(bus);
-+			sdio_claim_host(bus->sdiodev->func[1]);
-+			if (bus->ctrl_frame_stat) {
-+				bus->ctrl_frame_err = -ENODEV;
-+				bus->ctrl_frame_stat = false;
-+				brcmf_sdio_wait_event_wakeup(bus);
-+			}
-+			sdio_release_host(bus->sdiodev->func[1]);
- 		}
- 	} else if (atomic_read(&bus->intstatus) ||
- 		   atomic_read(&bus->ipend) > 0 ||
-@@ -2930,15 +2936,20 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	brcmf_sdio_trigger_dpc(bus);
- 	wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
- 					 msecs_to_jiffies(CTL_DONE_TIMEOUT));
--
--	if (!bus->ctrl_frame_stat) {
-+	ret = 0;
-+	if (bus->ctrl_frame_stat) {
-+		sdio_claim_host(bus->sdiodev->func[1]);
-+		if (bus->ctrl_frame_stat) {
-+			brcmf_dbg(SDIO, "ctrl_frame timeout\n");
-+			bus->ctrl_frame_stat = false;
-+			ret = -ETIMEDOUT;
-+		}
-+		sdio_release_host(bus->sdiodev->func[1]);
-+	}
-+	if (!ret) {
- 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
- 			  bus->ctrl_frame_err);
- 		ret = bus->ctrl_frame_err;
--	} else {
--		brcmf_dbg(SDIO, "ctrl_frame timeout\n");
--		bus->ctrl_frame_stat = false;
--		ret = -ETIMEDOUT;
- 	}
- 
- 	if (ret)
diff --git a/package/kernel/mac80211/patches/335-0004-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch b/package/kernel/mac80211/patches/335-0004-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch
deleted file mode 100644
index c9eb9008a6..0000000000
--- a/package/kernel/mac80211/patches/335-0004-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From: Syed Asifful Dayyan <syedd@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:42 +0100
-Subject: [PATCH] brcmfmac: Add support for BCM4345 SDIO chipset.
-
-These changes add support for BCM4345 SDIO chipset.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Syed Asifful Dayyan <syedd@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1096,6 +1096,7 @@ static const struct sdio_device_id brcmf
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
-+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
- 	{ /* end: all zeroes */ }
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -491,6 +491,10 @@ static void brcmf_chip_get_raminfo(struc
- 	case BRCM_CC_43362_CHIP_ID:
- 		ci->pub.ramsize = 0x3c000;
- 		break;
-+	case BRCM_CC_4345_CHIP_ID:
-+		ci->pub.ramsize = 0xc8000;
-+		ci->pub.rambase = 0x198000;
-+		break;
- 	case BRCM_CC_4339_CHIP_ID:
- 	case BRCM_CC_4354_CHIP_ID:
- 	case BRCM_CC_4356_CHIP_ID:
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -617,6 +617,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43362_NVRAM_NAME		"brcm/brcmfmac43362-sdio.txt"
- #define BCM4339_FIRMWARE_NAME		"brcm/brcmfmac4339-sdio.bin"
- #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
-+#define BCM4345_FIRMWARE_NAME		"brcm/brcmfmac4345-sdio.bin"
-+#define BCM4345_NVRAM_NAME		"brcm/brcmfmac4345-sdio.txt"
- #define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
- #define BCM4354_NVRAM_NAME		"brcm/brcmfmac4354-sdio.txt"
- 
-@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
- 
-@@ -669,6 +673,7 @@ static const struct brcmf_firmware_names
- 	{ BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
- 	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- 	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
-+	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
- 	{ BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
- 
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -37,6 +37,7 @@
- #define BRCM_CC_43362_CHIP_ID		43362
- #define BRCM_CC_4335_CHIP_ID		0x4335
- #define BRCM_CC_4339_CHIP_ID		0x4339
-+#define BRCM_CC_4345_CHIP_ID		0x4345
- #define BRCM_CC_4354_CHIP_ID		0x4354
- #define BRCM_CC_4356_CHIP_ID		0x4356
- #define BRCM_CC_43566_CHIP_ID		43566
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -33,6 +33,7 @@
- #define SDIO_DEVICE_ID_BROADCOM_43341		0xa94d
- #define SDIO_DEVICE_ID_BROADCOM_4335_4339	0x4335
- #define SDIO_DEVICE_ID_BROADCOM_43362		0xa962
-+#define SDIO_DEVICE_ID_BROADCOM_4345		0x4345
- #define SDIO_DEVICE_ID_BROADCOM_4354		0x4354
- 
- #define SDIO_VENDOR_ID_INTEL			0x0089
diff --git a/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch b/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch
new file mode 100644
index 0000000000..acaacf7cac
--- /dev/null
+++ b/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch
@@ -0,0 +1,61 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 18 Feb 2016 19:30:05 +0100
+Subject: [PATCH] mac80211: minstrel_ht: set A-MSDU tx limits based on selected
+ max_prob_rate
+
+Prevents excessive A-MSDU aggregation at low data rates or bad
+conditions.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -883,6 +883,39 @@ minstrel_ht_set_rate(struct minstrel_pri
+ 	ratetbl->rate[offset].flags = flags;
+ }
+ 
++static int
++minstrel_ht_get_max_amsdu_len(struct minstrel_ht_sta *mi)
++{
++	int group = mi->max_prob_rate / MCS_GROUP_RATES;
++	const struct mcs_group *g = &minstrel_mcs_groups[group];
++	int rate = mi->max_prob_rate % MCS_GROUP_RATES;
++
++	/* Disable A-MSDU if max_prob_rate is bad */
++	if (mi->groups[group].rates[rate].prob_ewma < MINSTREL_FRAC(50, 100))
++		return 1;
++
++	/* If the rate is slower than single-stream MCS1, make A-MSDU limit small */
++	if (g->duration[rate] > MCS_DURATION(1, 0, 52))
++		return 500;
++
++	/*
++	 * If the rate is slower than single-stream MCS4, limit A-MSDU to usual
++	 * data packet size
++	 */
++	if (g->duration[rate] > MCS_DURATION(1, 0, 104))
++		return 1500;
++
++	/*
++	 * If the rate is slower than single-stream MCS7, limit A-MSDU to twice
++	 * the usual data packet size
++	 */
++	if (g->duration[rate] > MCS_DURATION(1, 0, 260))
++		return 3000;
++
++	/* unlimited */
++	return 0;
++}
++
+ static void
+ minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
+ {
+@@ -907,6 +940,7 @@ minstrel_ht_update_rates(struct minstrel
+ 		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate);
+ 	}
+ 
++	mi->sta->max_rc_amsdu_len = minstrel_ht_get_max_amsdu_len(mi);
+ 	rates->rate[i].idx = -1;
+ 	rate_control_set_rates(mp->hw, mi->sta, rates);
+ }
diff --git a/package/kernel/mac80211/patches/336-0001-brcmfmac-remove-duplication-of-ramsize-info.patch b/package/kernel/mac80211/patches/336-0001-brcmfmac-remove-duplication-of-ramsize-info.patch
deleted file mode 100644
index 7a688c4be6..0000000000
--- a/package/kernel/mac80211/patches/336-0001-brcmfmac-remove-duplication-of-ramsize-info.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:27 +0100
-Subject: [PATCH] brcmfmac: remove duplication of ramsize info
-
-Removing the ramsize from the brcmf_sdio structure to avoid
-duplication. The information is available in brcmf_chip
-structure.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -432,8 +432,6 @@ struct brcmf_sdio {
- 	struct brcmf_sdio_dev *sdiodev;	/* sdio device handler */
- 	struct brcmf_chip *ci;	/* Chip info struct */
- 
--	u32 ramsize;		/* Size of RAM in SOCRAM (bytes) */
--
- 	u32 hostintmask;	/* Copy of Host Interrupt Mask */
- 	atomic_t intstatus;	/* Intstatus bits (events) pending */
- 	atomic_t fcstate;	/* State of dongle flow-control */
-@@ -1075,7 +1073,7 @@ static int brcmf_sdio_readshared(struct
- 	struct sdpcm_shared_le sh_le;
- 	__le32 addr_le;
- 
--	shaddr = bus->ci->rambase + bus->ramsize - 4;
-+	shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
- 
- 	/*
- 	 * Read last word in socram to determine
-@@ -3871,13 +3869,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
- 		drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
- 	brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
- 
--	/* Get info on the SOCRAM cores... */
--	bus->ramsize = bus->ci->ramsize;
--	if (!(bus->ramsize)) {
--		brcmf_err("failed to find SOCRAM memory!\n");
--		goto fail;
--	}
--
- 	/* Set card control so an SDIO card reset does a WLAN backplane reset */
- 	reg_val = brcmf_sdiod_regrb(bus->sdiodev,
- 				    SDIO_CCCR_BRCM_CARDCTRL, &err);
diff --git a/package/kernel/mac80211/patches/336-0002-brcmfmac-always-perform-cores-checks.patch b/package/kernel/mac80211/patches/336-0002-brcmfmac-always-perform-cores-checks.patch
deleted file mode 100644
index e2a2074247..0000000000
--- a/package/kernel/mac80211/patches/336-0002-brcmfmac-always-perform-cores-checks.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:28 +0100
-Subject: [PATCH] brcmfmac: always perform cores checks
-
-Instead of checking the cores in the chip only if CONFIG_BRCMDBG
-is selected perform the check always and extend it with more sanity
-checking.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -419,13 +419,13 @@ static struct brcmf_core *brcmf_chip_add
- 	return &core->pub;
- }
- 
--#ifdef DEBUG
- /* safety check for chipinfo */
- static int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
- {
- 	struct brcmf_core_priv *core;
- 	bool need_socram = false;
- 	bool has_socram = false;
-+	bool cpu_found = false;
- 	int idx = 1;
- 
- 	list_for_each_entry(core, &ci->cores, list) {
-@@ -435,12 +435,14 @@ static int brcmf_chip_cores_check(struct
- 
- 		switch (core->pub.id) {
- 		case BCMA_CORE_ARM_CM3:
-+			cpu_found = true;
- 			need_socram = true;
- 			break;
- 		case BCMA_CORE_INTERNAL_MEM:
- 			has_socram = true;
- 			break;
- 		case BCMA_CORE_ARM_CR4:
-+			cpu_found = true;
- 			if (ci->pub.rambase == 0) {
- 				brcmf_err("RAM base not provided with ARM CR4 core\n");
- 				return -ENOMEM;
-@@ -451,19 +453,21 @@ static int brcmf_chip_cores_check(struct
- 		}
- 	}
- 
-+	if (!cpu_found) {
-+		brcmf_err("CPU core not detected\n");
-+		return -ENXIO;
-+	}
- 	/* check RAM core presence for ARM CM3 core */
- 	if (need_socram && !has_socram) {
- 		brcmf_err("RAM core not provided with ARM CM3 core\n");
- 		return -ENODEV;
- 	}
-+	if (!ci->pub.ramsize) {
-+		brcmf_err("RAM size is undetermined\n");
-+		return -ENOMEM;
-+	}
- 	return 0;
- }
--#else	/* DEBUG */
--static inline int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
--{
--	return 0;
--}
--#endif
- 
- static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
- {
diff --git a/package/kernel/mac80211/patches/336-0003-brcmfmac-rename-chip-download-functions.patch b/package/kernel/mac80211/patches/336-0003-brcmfmac-rename-chip-download-functions.patch
deleted file mode 100644
index a272800577..0000000000
--- a/package/kernel/mac80211/patches/336-0003-brcmfmac-rename-chip-download-functions.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:29 +0100
-Subject: [PATCH] brcmfmac: rename chip download functions
-
-The functions brcmf_chip_[enter/exit]_download() are not exclusively
-used for firmware download so rename these more appropriate.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -807,7 +807,7 @@ struct brcmf_chip *brcmf_chip_attach(voi
- 		err = -EINVAL;
- 	if (WARN_ON(!ops->prepare))
- 		err = -EINVAL;
--	if (WARN_ON(!ops->exit_dl))
-+	if (WARN_ON(!ops->activate))
- 		err = -EINVAL;
- 	if (err < 0)
- 		return ERR_PTR(-EINVAL);
-@@ -905,7 +905,7 @@ void brcmf_chip_resetcore(struct brcmf_c
- }
- 
- static void
--brcmf_chip_cm3_enterdl(struct brcmf_chip_priv *chip)
-+brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
- 
-@@ -919,7 +919,7 @@ brcmf_chip_cm3_enterdl(struct brcmf_chip
- 	brcmf_chip_resetcore(core, 0, 0, 0);
- }
- 
--static bool brcmf_chip_cm3_exitdl(struct brcmf_chip_priv *chip)
-+static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
- 
-@@ -929,7 +929,7 @@ static bool brcmf_chip_cm3_exitdl(struct
- 		return false;
- 	}
- 
--	chip->ops->exit_dl(chip->ctx, &chip->pub, 0);
-+	chip->ops->activate(chip->ctx, &chip->pub, 0);
- 
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CM3);
- 	brcmf_chip_resetcore(core, 0, 0, 0);
-@@ -938,7 +938,7 @@ static bool brcmf_chip_cm3_exitdl(struct
- }
- 
- static inline void
--brcmf_chip_cr4_enterdl(struct brcmf_chip_priv *chip)
-+brcmf_chip_cr4_set_passive(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
- 
-@@ -951,11 +951,11 @@ brcmf_chip_cr4_enterdl(struct brcmf_chip
- 			     D11_BCMA_IOCTL_PHYCLOCKEN);
- }
- 
--static bool brcmf_chip_cr4_exitdl(struct brcmf_chip_priv *chip, u32 rstvec)
-+static bool brcmf_chip_cr4_set_active(struct brcmf_chip_priv *chip, u32 rstvec)
- {
- 	struct brcmf_core *core;
- 
--	chip->ops->exit_dl(chip->ctx, &chip->pub, rstvec);
-+	chip->ops->activate(chip->ctx, &chip->pub, rstvec);
- 
- 	/* restore ARM */
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CR4);
-@@ -964,7 +964,7 @@ static bool brcmf_chip_cr4_exitdl(struct
- 	return true;
- }
- 
--void brcmf_chip_enter_download(struct brcmf_chip *pub)
-+void brcmf_chip_set_passive(struct brcmf_chip *pub)
- {
- 	struct brcmf_chip_priv *chip;
- 	struct brcmf_core *arm;
-@@ -974,14 +974,14 @@ void brcmf_chip_enter_download(struct br
- 	chip = container_of(pub, struct brcmf_chip_priv, pub);
- 	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
- 	if (arm) {
--		brcmf_chip_cr4_enterdl(chip);
-+		brcmf_chip_cr4_set_passive(chip);
- 		return;
- 	}
- 
--	brcmf_chip_cm3_enterdl(chip);
-+	brcmf_chip_cm3_set_passive(chip);
- }
- 
--bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec)
-+bool brcmf_chip_set_active(struct brcmf_chip *pub, u32 rstvec)
- {
- 	struct brcmf_chip_priv *chip;
- 	struct brcmf_core *arm;
-@@ -991,9 +991,9 @@ bool brcmf_chip_exit_download(struct brc
- 	chip = container_of(pub, struct brcmf_chip_priv, pub);
- 	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
- 	if (arm)
--		return brcmf_chip_cr4_exitdl(chip, rstvec);
-+		return brcmf_chip_cr4_set_active(chip, rstvec);
- 
--	return brcmf_chip_cm3_exitdl(chip);
-+	return brcmf_chip_cm3_set_active(chip);
- }
- 
- bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -64,7 +64,7 @@ struct brcmf_core {
-  * @write32: write 32-bit value over bus.
-  * @prepare: prepare bus for core configuration.
-  * @setup: bus-specific core setup.
-- * @exit_dl: exit download state.
-+ * @active: chip becomes active.
-  *	The callback should use the provided @rstvec when non-zero.
-  */
- struct brcmf_buscore_ops {
-@@ -72,7 +72,7 @@ struct brcmf_buscore_ops {
- 	void (*write32)(void *ctx, u32 addr, u32 value);
- 	int (*prepare)(void *ctx);
- 	int (*setup)(void *ctx, struct brcmf_chip *chip);
--	void (*exit_dl)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
-+	void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
- };
- 
- struct brcmf_chip *brcmf_chip_attach(void *ctx,
-@@ -84,8 +84,8 @@ bool brcmf_chip_iscoreup(struct brcmf_co
- void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset);
- void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset,
- 			  u32 postreset);
--void brcmf_chip_enter_download(struct brcmf_chip *ci);
--bool brcmf_chip_exit_download(struct brcmf_chip *ci, u32 rstvec);
-+void brcmf_chip_set_passive(struct brcmf_chip *ci);
-+bool brcmf_chip_set_active(struct brcmf_chip *ci, u32 rstvec);
- bool brcmf_chip_sr_capable(struct brcmf_chip *pub);
- 
- #endif /* BRCMF_AXIDMP_H */
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -509,7 +509,7 @@ static void brcmf_pcie_attach(struct brc
- 
- static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo)
- {
--	brcmf_chip_enter_download(devinfo->ci);
-+	brcmf_chip_set_passive(devinfo->ci);
- 
- 	if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) {
- 		brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4);
-@@ -536,7 +536,7 @@ static int brcmf_pcie_exit_download_stat
- 		brcmf_chip_resetcore(core, 0, 0, 0);
- 	}
- 
--	return !brcmf_chip_exit_download(devinfo->ci, resetintr);
-+	return !brcmf_chip_set_active(devinfo->ci, resetintr);
- }
- 
- 
-@@ -1566,8 +1566,8 @@ static int brcmf_pcie_buscoreprep(void *
- }
- 
- 
--static void brcmf_pcie_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
--				      u32 rstvec)
-+static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip,
-+					u32 rstvec)
- {
- 	struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
- 
-@@ -1577,7 +1577,7 @@ static void brcmf_pcie_buscore_exitdl(vo
- 
- static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = {
- 	.prepare = brcmf_pcie_buscoreprep,
--	.exit_dl = brcmf_pcie_buscore_exitdl,
-+	.activate = brcmf_pcie_buscore_activate,
- 	.read32 = brcmf_pcie_buscore_read32,
- 	.write32 = brcmf_pcie_buscore_write32,
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3357,7 +3357,7 @@ static int brcmf_sdio_download_firmware(
- 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 
- 	/* Keep arm in reset */
--	brcmf_chip_enter_download(bus->ci);
-+	brcmf_chip_set_passive(bus->ci);
- 
- 	rstvec = get_unaligned_le32(fw->data);
- 	brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
-@@ -3378,7 +3378,7 @@ static int brcmf_sdio_download_firmware(
- 	}
- 
- 	/* Take arm out of reset */
--	if (!brcmf_chip_exit_download(bus->ci, rstvec)) {
-+	if (!brcmf_chip_set_active(bus->ci, rstvec)) {
- 		brcmf_err("error getting out of ARM core reset\n");
- 		goto err;
- 	}
-@@ -3771,8 +3771,8 @@ static int brcmf_sdio_buscoreprep(void *
- 	return 0;
- }
- 
--static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
--				      u32 rstvec)
-+static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
-+					u32 rstvec)
- {
- 	struct brcmf_sdio_dev *sdiodev = ctx;
- 	struct brcmf_core *core;
-@@ -3815,7 +3815,7 @@ static void brcmf_sdio_buscore_write32(v
- 
- static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
- 	.prepare = brcmf_sdio_buscoreprep,
--	.exit_dl = brcmf_sdio_buscore_exitdl,
-+	.activate = brcmf_sdio_buscore_activate,
- 	.read32 = brcmf_sdio_buscore_read32,
- 	.write32 = brcmf_sdio_buscore_write32,
- };
-@@ -4239,12 +4239,11 @@ void brcmf_sdio_remove(struct brcmf_sdio
- 				sdio_claim_host(bus->sdiodev->func[1]);
- 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 				/* Leave the device in state where it is
--				 * 'quiet'. This is done by putting it in
--				 * download_state which essentially resets
--				 * all necessary cores.
-+				 * 'passive'. This is done by resetting all
-+				 * necessary cores.
- 				 */
- 				msleep(20);
--				brcmf_chip_enter_download(bus->ci);
-+				brcmf_chip_set_passive(bus->ci);
- 				brcmf_sdio_clkctl(bus, CLK_NONE, false);
- 				sdio_release_host(bus->sdiodev->func[1]);
- 			}
diff --git a/package/kernel/mac80211/patches/336-0004-brcmfmac-assure-device-is-ready-for-download-after-b.patch b/package/kernel/mac80211/patches/336-0004-brcmfmac-assure-device-is-ready-for-download-after-b.patch
deleted file mode 100644
index 6b1dd8144f..0000000000
--- a/package/kernel/mac80211/patches/336-0004-brcmfmac-assure-device-is-ready-for-download-after-b.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:30 +0100
-Subject: [PATCH] brcmfmac: assure device is ready for download after
- brcmf_chip_attach()
-
-Make the brcmf_chip_attach() function responsible for putting the
-device in a state where it is accessible for firmware download.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -786,12 +786,6 @@ static int brcmf_chip_setup(struct brcmf
- 	if (chip->ops->setup)
- 		ret = chip->ops->setup(chip->ctx, pub);
- 
--	/*
--	 * Make sure any on-chip ARM is off (in case strapping is wrong),
--	 * or downloaded code was already running.
--	 */
--	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
--	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4);
- 	return ret;
- }
- 
-@@ -833,6 +827,8 @@ struct brcmf_chip *brcmf_chip_attach(voi
- 	if (err < 0)
- 		goto fail;
- 
-+	/* assure chip is passive for download */
-+	brcmf_chip_set_passive(&chip->pub);
- 	return &chip->pub;
- 
- fail:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -509,8 +509,6 @@ static void brcmf_pcie_attach(struct brc
- 
- static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo)
- {
--	brcmf_chip_set_passive(devinfo->ci);
--
- 	if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) {
- 		brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4);
- 		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_ARMCR4REG_BANKIDX,
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3356,9 +3356,6 @@ static int brcmf_sdio_download_firmware(
- 	sdio_claim_host(bus->sdiodev->func[1]);
- 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 
--	/* Keep arm in reset */
--	brcmf_chip_set_passive(bus->ci);
--
- 	rstvec = get_unaligned_le32(fw->data);
- 	brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
- 
diff --git a/package/kernel/mac80211/patches/336-0005-brcmfmac-extract-ram-size-info-from-internal-memory-.patch b/package/kernel/mac80211/patches/336-0005-brcmfmac-extract-ram-size-info-from-internal-memory-.patch
deleted file mode 100644
index bcc2ed4868..0000000000
--- a/package/kernel/mac80211/patches/336-0005-brcmfmac-extract-ram-size-info-from-internal-memory-.patch
+++ /dev/null
@@ -1,367 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:31 +0100
-Subject: [PATCH] brcmfmac: extract ram size info from internal memory
- registers
-
-Instead of hard-coded memory sizes it is possible to obtain that
-information from the internal memory registers.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -100,9 +100,6 @@
- #define BCM4329_CORE_SOCRAM_BASE	0x18003000
- /* ARM Cortex M3 core, ID 0x82a */
- #define BCM4329_CORE_ARM_BASE		0x18002000
--#define BCM4329_RAMSIZE			0x48000
--/* bcm43143 */
--#define BCM43143_RAMSIZE		0x70000
- 
- #define CORE_SB(base, field) \
- 		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
-@@ -150,6 +147,78 @@ struct sbconfig {
- 	u32 sbidhigh;	/* identification */
- };
- 
-+/* bankidx and bankinfo reg defines corerev >= 8 */
-+#define SOCRAM_BANKINFO_RETNTRAM_MASK	0x00010000
-+#define SOCRAM_BANKINFO_SZMASK		0x0000007f
-+#define SOCRAM_BANKIDX_ROM_MASK		0x00000100
-+
-+#define SOCRAM_BANKIDX_MEMTYPE_SHIFT	8
-+/* socram bankinfo memtype */
-+#define SOCRAM_MEMTYPE_RAM		0
-+#define SOCRAM_MEMTYPE_R0M		1
-+#define SOCRAM_MEMTYPE_DEVRAM		2
-+
-+#define SOCRAM_BANKINFO_SZBASE		8192
-+#define SRCI_LSS_MASK		0x00f00000
-+#define SRCI_LSS_SHIFT		20
-+#define	SRCI_SRNB_MASK		0xf0
-+#define	SRCI_SRNB_SHIFT		4
-+#define	SRCI_SRBSZ_MASK		0xf
-+#define	SRCI_SRBSZ_SHIFT	0
-+#define SR_BSZ_BASE		14
-+
-+struct sbsocramregs {
-+	u32 coreinfo;
-+	u32 bwalloc;
-+	u32 extracoreinfo;
-+	u32 biststat;
-+	u32 bankidx;
-+	u32 standbyctrl;
-+
-+	u32 errlogstatus;	/* rev 6 */
-+	u32 errlogaddr;	/* rev 6 */
-+	/* used for patching rev 3 & 5 */
-+	u32 cambankidx;
-+	u32 cambankstandbyctrl;
-+	u32 cambankpatchctrl;
-+	u32 cambankpatchtblbaseaddr;
-+	u32 cambankcmdreg;
-+	u32 cambankdatareg;
-+	u32 cambankmaskreg;
-+	u32 PAD[1];
-+	u32 bankinfo;	/* corev 8 */
-+	u32 bankpda;
-+	u32 PAD[14];
-+	u32 extmemconfig;
-+	u32 extmemparitycsr;
-+	u32 extmemparityerrdata;
-+	u32 extmemparityerrcnt;
-+	u32 extmemwrctrlandsize;
-+	u32 PAD[84];
-+	u32 workaround;
-+	u32 pwrctl;		/* corerev >= 2 */
-+	u32 PAD[133];
-+	u32 sr_control;     /* corerev >= 15 */
-+	u32 sr_status;      /* corerev >= 15 */
-+	u32 sr_address;     /* corerev >= 15 */
-+	u32 sr_data;        /* corerev >= 15 */
-+};
-+
-+#define SOCRAMREGOFFS(_f)	offsetof(struct sbsocramregs, _f)
-+
-+#define ARMCR4_CAP		(0x04)
-+#define ARMCR4_BANKIDX		(0x40)
-+#define ARMCR4_BANKINFO		(0x44)
-+#define ARMCR4_BANKPDA		(0x4C)
-+
-+#define	ARMCR4_TCBBNB_MASK	0xf0
-+#define	ARMCR4_TCBBNB_SHIFT	4
-+#define	ARMCR4_TCBANB_MASK	0xf
-+#define	ARMCR4_TCBANB_SHIFT	0
-+
-+#define	ARMCR4_BSZ_MASK		0x3f
-+#define	ARMCR4_BSZ_MULT		8192
-+
- struct brcmf_core_priv {
- 	struct brcmf_core pub;
- 	u32 wrapbase;
-@@ -443,10 +512,6 @@ static int brcmf_chip_cores_check(struct
- 			break;
- 		case BCMA_CORE_ARM_CR4:
- 			cpu_found = true;
--			if (ci->pub.rambase == 0) {
--				brcmf_err("RAM base not provided with ARM CR4 core\n");
--				return -ENOMEM;
--			}
- 			break;
- 		default:
- 			break;
-@@ -462,60 +527,160 @@ static int brcmf_chip_cores_check(struct
- 		brcmf_err("RAM core not provided with ARM CM3 core\n");
- 		return -ENODEV;
- 	}
--	if (!ci->pub.ramsize) {
--		brcmf_err("RAM size is undetermined\n");
--		return -ENOMEM;
--	}
- 	return 0;
- }
- 
--static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
-+static u32 brcmf_chip_core_read32(struct brcmf_core_priv *core, u16 reg)
- {
--	switch (ci->pub.chip) {
--	case BRCM_CC_4329_CHIP_ID:
--		ci->pub.ramsize = BCM4329_RAMSIZE;
--		break;
--	case BRCM_CC_43143_CHIP_ID:
--		ci->pub.ramsize = BCM43143_RAMSIZE;
--		break;
--	case BRCM_CC_43241_CHIP_ID:
--		ci->pub.ramsize = 0x90000;
--		break;
--	case BRCM_CC_4330_CHIP_ID:
--		ci->pub.ramsize = 0x48000;
--		break;
-+	return core->chip->ops->read32(core->chip->ctx, core->pub.base + reg);
-+}
-+
-+static void brcmf_chip_core_write32(struct brcmf_core_priv *core,
-+				    u16 reg, u32 val)
-+{
-+	core->chip->ops->write32(core->chip->ctx, core->pub.base + reg, val);
-+}
-+
-+static bool brcmf_chip_socram_banksize(struct brcmf_core_priv *core, u8 idx,
-+				       u32 *banksize)
-+{
-+	u32 bankinfo;
-+	u32 bankidx = (SOCRAM_MEMTYPE_RAM << SOCRAM_BANKIDX_MEMTYPE_SHIFT);
-+
-+	bankidx |= idx;
-+	brcmf_chip_core_write32(core, SOCRAMREGOFFS(bankidx), bankidx);
-+	bankinfo = brcmf_chip_core_read32(core, SOCRAMREGOFFS(bankinfo));
-+	*banksize = (bankinfo & SOCRAM_BANKINFO_SZMASK) + 1;
-+	*banksize *= SOCRAM_BANKINFO_SZBASE;
-+	return !!(bankinfo & SOCRAM_BANKINFO_RETNTRAM_MASK);
-+}
-+
-+static void brcmf_chip_socram_ramsize(struct brcmf_core_priv *sr, u32 *ramsize,
-+				      u32 *srsize)
-+{
-+	u32 coreinfo;
-+	uint nb, banksize, lss;
-+	bool retent;
-+	int i;
-+
-+	*ramsize = 0;
-+	*srsize = 0;
-+
-+	if (WARN_ON(sr->pub.rev < 4))
-+		return;
-+
-+	if (!brcmf_chip_iscoreup(&sr->pub))
-+		brcmf_chip_resetcore(&sr->pub, 0, 0, 0);
-+
-+	/* Get info for determining size */
-+	coreinfo = brcmf_chip_core_read32(sr, SOCRAMREGOFFS(coreinfo));
-+	nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+
-+	if ((sr->pub.rev <= 7) || (sr->pub.rev == 12)) {
-+		banksize = (coreinfo & SRCI_SRBSZ_MASK);
-+		lss = (coreinfo & SRCI_LSS_MASK) >> SRCI_LSS_SHIFT;
-+		if (lss != 0)
-+			nb--;
-+		*ramsize = nb * (1 << (banksize + SR_BSZ_BASE));
-+		if (lss != 0)
-+			*ramsize += (1 << ((lss - 1) + SR_BSZ_BASE));
-+	} else {
-+		nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+		for (i = 0; i < nb; i++) {
-+			retent = brcmf_chip_socram_banksize(sr, i, &banksize);
-+			*ramsize += banksize;
-+			if (retent)
-+				*srsize += banksize;
-+		}
-+	}
-+
-+	/* hardcoded save&restore memory sizes */
-+	switch (sr->chip->pub.chip) {
- 	case BRCM_CC_4334_CHIP_ID:
--	case BRCM_CC_43340_CHIP_ID:
--		ci->pub.ramsize = 0x80000;
-+		if (sr->chip->pub.chiprev < 2)
-+			*srsize = (32 * 1024);
- 		break;
--	case BRCM_CC_4335_CHIP_ID:
--		ci->pub.ramsize = 0xc0000;
--		ci->pub.rambase = 0x180000;
--		break;
--	case BRCM_CC_43362_CHIP_ID:
--		ci->pub.ramsize = 0x3c000;
-+	default:
- 		break;
-+	}
-+}
-+
-+/** Return the TCM-RAM size of the ARMCR4 core. */
-+static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4)
-+{
-+	u32 corecap;
-+	u32 memsize = 0;
-+	u32 nab;
-+	u32 nbb;
-+	u32 totb;
-+	u32 bxinfo;
-+	u32 idx;
-+
-+	corecap = brcmf_chip_core_read32(cr4, ARMCR4_CAP);
-+
-+	nab = (corecap & ARMCR4_TCBANB_MASK) >> ARMCR4_TCBANB_SHIFT;
-+	nbb = (corecap & ARMCR4_TCBBNB_MASK) >> ARMCR4_TCBBNB_SHIFT;
-+	totb = nab + nbb;
-+
-+	for (idx = 0; idx < totb; idx++) {
-+		brcmf_chip_core_write32(cr4, ARMCR4_BANKIDX, idx);
-+		bxinfo = brcmf_chip_core_read32(cr4, ARMCR4_BANKINFO);
-+		memsize += ((bxinfo & ARMCR4_BSZ_MASK) + 1) * ARMCR4_BSZ_MULT;
-+	}
-+
-+	return memsize;
-+}
-+
-+static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci)
-+{
-+	switch (ci->pub.chip) {
- 	case BRCM_CC_4345_CHIP_ID:
--		ci->pub.ramsize = 0xc8000;
--		ci->pub.rambase = 0x198000;
--		break;
-+		return 0x198000;
-+	case BRCM_CC_4335_CHIP_ID:
- 	case BRCM_CC_4339_CHIP_ID:
- 	case BRCM_CC_4354_CHIP_ID:
- 	case BRCM_CC_4356_CHIP_ID:
- 	case BRCM_CC_43567_CHIP_ID:
- 	case BRCM_CC_43569_CHIP_ID:
- 	case BRCM_CC_43570_CHIP_ID:
--		ci->pub.ramsize = 0xc0000;
--		ci->pub.rambase = 0x180000;
--		break;
- 	case BRCM_CC_43602_CHIP_ID:
--		ci->pub.ramsize = 0xf0000;
--		ci->pub.rambase = 0x180000;
--		break;
-+		return 0x180000;
- 	default:
- 		brcmf_err("unknown chip: %s\n", ci->pub.name);
- 		break;
- 	}
-+	return 0;
-+}
-+
-+static int brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
-+{
-+	struct brcmf_core_priv *mem_core;
-+	struct brcmf_core *mem;
-+
-+	mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_ARM_CR4);
-+	if (mem) {
-+		mem_core = container_of(mem, struct brcmf_core_priv, pub);
-+		ci->pub.ramsize = brcmf_chip_tcm_ramsize(mem_core);
-+		ci->pub.rambase = brcmf_chip_tcm_rambase(ci);
-+		if (!ci->pub.rambase) {
-+			brcmf_err("RAM base not provided with ARM CR4 core\n");
-+			return -EINVAL;
-+		}
-+	} else {
-+		mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_INTERNAL_MEM);
-+		mem_core = container_of(mem, struct brcmf_core_priv, pub);
-+		brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize,
-+					  &ci->pub.srsize);
-+	}
-+	brcmf_dbg(INFO, "RAM: base=0x%x size=%d (0x%x) sr=%d (0x%x)\n",
-+		  ci->pub.rambase, ci->pub.ramsize, ci->pub.ramsize,
-+		  ci->pub.srsize, ci->pub.srsize);
-+
-+	if (!ci->pub.ramsize) {
-+		brcmf_err("RAM size is undetermined\n");
-+		return -ENOMEM;
-+	}
-+	return 0;
- }
- 
- static u32 brcmf_chip_dmp_get_desc(struct brcmf_chip_priv *ci, u32 *eromaddr,
-@@ -668,6 +833,7 @@ static int brcmf_chip_recognition(struct
- 	struct brcmf_core *core;
- 	u32 regdata;
- 	u32 socitype;
-+	int ret;
- 
- 	/* Get CC core rev
- 	 * Chipid is assume to be at offset 0 from SI_ENUM_BASE
-@@ -720,9 +886,13 @@ static int brcmf_chip_recognition(struct
- 		return -ENODEV;
- 	}
- 
--	brcmf_chip_get_raminfo(ci);
--
--	return brcmf_chip_cores_check(ci);
-+	ret = brcmf_chip_cores_check(ci);
-+	if (ret)
-+		return ret;
-+
-+	/* assure chip is passive for core access */
-+	brcmf_chip_set_passive(&ci->pub);
-+	return brcmf_chip_get_raminfo(ci);
- }
- 
- static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id)
-@@ -827,8 +997,6 @@ struct brcmf_chip *brcmf_chip_attach(voi
- 	if (err < 0)
- 		goto fail;
- 
--	/* assure chip is passive for download */
--	brcmf_chip_set_passive(&chip->pub);
- 	return &chip->pub;
- 
- fail:
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -30,7 +30,8 @@
-  * @pmucaps: PMU capabilities.
-  * @pmurev: PMU revision.
-  * @rambase: RAM base address (only applicable for ARM CR4 chips).
-- * @ramsize: amount of RAM on chip.
-+ * @ramsize: amount of RAM on chip including retention.
-+ * @srsize: amount of retention RAM on chip.
-  * @name: string representation of the chip identifier.
-  */
- struct brcmf_chip {
-@@ -41,6 +42,7 @@ struct brcmf_chip {
- 	u32 pmurev;
- 	u32 rambase;
- 	u32 ramsize;
-+	u32 srsize;
- 	char name[8];
- };
- 
diff --git a/package/kernel/mac80211/patches/336-0006-brcmfmac-take-save-restore-memory-into-account-for-S.patch b/package/kernel/mac80211/patches/336-0006-brcmfmac-take-save-restore-memory-into-account-for-S.patch
deleted file mode 100644
index 69618a7aa7..0000000000
--- a/package/kernel/mac80211/patches/336-0006-brcmfmac-take-save-restore-memory-into-account-for-S.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:32 +0100
-Subject: [PATCH] brcmfmac: take save&restore memory into account for SDIO
- shared info
-
-The firmware provides pointer to SDIO shared information at end of
-RAM during firmware initialization. End of RAM is obviously determined
-by the actual ram size, but part of that may be used for save&restore
-memory. In that case another location in RAM will hold the pointer.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -1067,44 +1067,47 @@ static inline bool brcmf_sdio_valid_shar
- static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
- 				 struct sdpcm_shared *sh)
- {
--	u32 addr;
-+	u32 addr = 0;
- 	int rv;
- 	u32 shaddr = 0;
- 	struct sdpcm_shared_le sh_le;
- 	__le32 addr_le;
- 
--	shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
-+	sdio_claim_host(bus->sdiodev->func[1]);
-+	brcmf_sdio_bus_sleep(bus, false, false);
- 
- 	/*
- 	 * Read last word in socram to determine
- 	 * address of sdpcm_shared structure
- 	 */
--	sdio_claim_host(bus->sdiodev->func[1]);
--	brcmf_sdio_bus_sleep(bus, false, false);
--	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
--	sdio_release_host(bus->sdiodev->func[1]);
-+	shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
-+	if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci))
-+		shaddr -= bus->ci->srsize;
-+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr,
-+			       (u8 *)&addr_le, 4);
- 	if (rv < 0)
--		return rv;
--
--	addr = le32_to_cpu(addr_le);
--
--	brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
-+		goto fail;
- 
- 	/*
- 	 * Check if addr is valid.
- 	 * NVRAM length at the end of memory should have been overwritten.
- 	 */
-+	addr = le32_to_cpu(addr_le);
- 	if (!brcmf_sdio_valid_shared_address(addr)) {
--			brcmf_err("invalid sdpcm_shared address 0x%08X\n",
--				  addr);
--			return -EINVAL;
-+		brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr);
-+		rv = -EINVAL;
-+		goto fail;
- 	}
- 
-+	brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);
-+
- 	/* Read hndrte_shared structure */
- 	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
- 			       sizeof(struct sdpcm_shared_le));
- 	if (rv < 0)
--		return rv;
-+		goto fail;
-+
-+	sdio_release_host(bus->sdiodev->func[1]);
- 
- 	/* Endianness */
- 	sh->flags = le32_to_cpu(sh_le.flags);
-@@ -1121,8 +1124,13 @@ static int brcmf_sdio_readshared(struct
- 			  sh->flags & SDPCM_SHARED_VERSION_MASK);
- 		return -EPROTO;
- 	}
--
- 	return 0;
-+
-+fail:
-+	brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n",
-+		  rv, addr);
-+	sdio_release_host(bus->sdiodev->func[1]);
-+	return rv;
- }
- 
- static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
diff --git a/package/kernel/mac80211/patches/336-0007-brcmfmac-fix-watchdog-timer-regression.patch b/package/kernel/mac80211/patches/336-0007-brcmfmac-fix-watchdog-timer-regression.patch
deleted file mode 100644
index 1b10dbb800..0000000000
--- a/package/kernel/mac80211/patches/336-0007-brcmfmac-fix-watchdog-timer-regression.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:33 +0100
-Subject: [PATCH] brcmfmac: fix watchdog timer regression
-
-The watchdog timer is used to put the device in a low-power mode when
-it is idle for some time. This timer is stopped during that mode and
-should be restarted upon activity. This has been broken by commit
-d4150fced0365 ("brcmfmac: Simplify watchdog sleep."). This patch
-restores the behaviour as it was before that commit.
-
-Reported-by: Pontus Fuchs <pontusf@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -972,7 +972,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 			brcmf_sdio_sdclk(bus, true);
- 		/* Now request HT Avail on the backplane */
- 		brcmf_sdio_htclk(bus, true, pendok);
--		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- 		break;
- 
- 	case CLK_SDONLY:
-@@ -984,7 +983,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 		else
- 			brcmf_err("request for %d -> %d\n",
- 				  bus->clkstate, target);
--		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- 		break;
- 
- 	case CLK_NONE:
-@@ -993,7 +991,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 			brcmf_sdio_htclk(bus, false, false);
- 		/* Now remove the SD clock */
- 		brcmf_sdio_sdclk(bus, false);
--		brcmf_sdio_wd_timer(bus, 0);
- 		break;
- 	}
- #ifdef DEBUG
-@@ -1048,6 +1045,7 @@ end:
- 			brcmf_sdio_clkctl(bus, CLK_NONE, pendok);
- 	} else {
- 		brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
-+		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- 	}
- 	bus->sleeping = sleep;
- 	brcmf_dbg(SDIO, "new state %s\n",
-@@ -4242,6 +4240,7 @@ void brcmf_sdio_remove(struct brcmf_sdio
- 		if (bus->ci) {
- 			if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
- 				sdio_claim_host(bus->sdiodev->func[1]);
-+				brcmf_sdio_wd_timer(bus, 0);
- 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 				/* Leave the device in state where it is
- 				 * 'passive'. This is done by resetting all
diff --git a/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch b/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch
new file mode 100644
index 0000000000..32a2ad6f0b
--- /dev/null
+++ b/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch
@@ -0,0 +1,31 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 18 Feb 2016 19:45:33 +0100
+Subject: [PATCH] mac80211: minstrel_ht: set default tx aggregation timeout to
+ 0
+
+The value 5000 was put here with the addition of the timeout field to
+ieee80211_start_tx_ba_session. It was originally added in mac80211 to
+save resources for drivers like iwlwifi, which only supports a limited
+number of concurrent aggregation sessions.
+
+Since iwlwifi does not use minstrel_ht and other drivers don't need
+this, 0 is a better default - especially since there have been
+recent reports of aggregation setup related issues reproduced with
+ath9k. This should improve stability without causing any adverse
+effects.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -692,7 +692,7 @@ minstrel_aggr_check(struct ieee80211_sta
+ 	if (likely(sta->ampdu_mlme.tid_tx[tid]))
+ 		return;
+ 
+-	ieee80211_start_tx_ba_session(pubsta, tid, 5000);
++	ieee80211_start_tx_ba_session(pubsta, tid, 0);
+ }
+ 
+ static void
diff --git a/package/kernel/mac80211/patches/337-0001-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch b/package/kernel/mac80211/patches/337-0001-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch
deleted file mode 100644
index af76f13ecd..0000000000
--- a/package/kernel/mac80211/patches/337-0001-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:21 +0100
-Subject: [PATCH] brcmfmac: avoid runtime-pm for sdio host controller
-
-Several host controllers supporting runtime-pm are causing issues
-with our sdio wireless cards because they disable the sdio interrupt
-upon going into runtime suspend. This patch avoids that by doing
-a pm_runtime_forbid() call during the probe. Tested with Sony Vaio
-Duo 13 which uses sdhci-acpi host controller.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -29,6 +29,7 @@
- #include <linux/mmc/host.h>
- #include <linux/platform_device.h>
- #include <linux/platform_data/brcmfmac-sdio.h>
-+#include <linux/pm_runtime.h>
- #include <linux/suspend.h>
- #include <linux/errno.h>
- #include <linux/module.h>
-@@ -1006,6 +1007,7 @@ static int brcmf_sdiod_remove(struct brc
- 	sg_free_table(&sdiodev->sgtable);
- 	sdiodev->sbwad = 0;
- 
-+	pm_runtime_allow(sdiodev->func[1]->card->host->parent);
- 	return 0;
- }
- 
-@@ -1074,7 +1076,7 @@ static int brcmf_sdiod_probe(struct brcm
- 		ret = -ENODEV;
- 		goto out;
- 	}
--
-+	pm_runtime_forbid(host->parent);
- out:
- 	if (ret)
- 		brcmf_sdiod_remove(sdiodev);
diff --git a/package/kernel/mac80211/patches/337-0002-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch b/package/kernel/mac80211/patches/337-0002-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch
deleted file mode 100644
index c419cc68f5..0000000000
--- a/package/kernel/mac80211/patches/337-0002-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:22 +0100
-Subject: [PATCH] brcmfmac: Add necessary memory barriers for SDIO.
-
-SDIO uses a thread to handle all communication with the device,
-for this data is exchanged between threads. This data needs proper
-memory barriers to make sure that data "exchange" is going correct.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -507,8 +507,8 @@ struct brcmf_sdio {
- 
- 	struct workqueue_struct *brcmf_wq;
- 	struct work_struct datawork;
--	atomic_t dpc_tskcnt;
--	atomic_t dpc_running;
-+	bool dpc_triggered;
-+	bool dpc_running;
- 
- 	bool txoff;		/* Transmit flow-controlled */
- 	struct brcmf_sdio_count sdcnt;
-@@ -2713,6 +2713,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
- 						      bus->ctrl_frame_len);
- 			bus->ctrl_frame_err = err;
-+			wmb();
- 			bus->ctrl_frame_stat = false;
- 		}
- 		sdio_release_host(bus->sdiodev->func[1]);
-@@ -2734,6 +2735,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 			sdio_claim_host(bus->sdiodev->func[1]);
- 			if (bus->ctrl_frame_stat) {
- 				bus->ctrl_frame_err = -ENODEV;
-+				wmb();
- 				bus->ctrl_frame_stat = false;
- 				brcmf_sdio_wait_event_wakeup(bus);
- 			}
-@@ -2744,7 +2746,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 		   (!atomic_read(&bus->fcstate) &&
- 		    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
- 		    data_ok(bus))) {
--		atomic_inc(&bus->dpc_tskcnt);
-+		bus->dpc_triggered = true;
- 	}
- }
- 
-@@ -2940,6 +2942,7 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	/* Send from dpc */
- 	bus->ctrl_frame_buf = msg;
- 	bus->ctrl_frame_len = msglen;
-+	wmb();
- 	bus->ctrl_frame_stat = true;
- 
- 	brcmf_sdio_trigger_dpc(bus);
-@@ -2958,6 +2961,7 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	if (!ret) {
- 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
- 			  bus->ctrl_frame_err);
-+		rmb();
- 		ret = bus->ctrl_frame_err;
- 	}
- 
-@@ -3526,8 +3530,8 @@ done:
- 
- void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus)
- {
--	if (atomic_read(&bus->dpc_tskcnt) == 0) {
--		atomic_inc(&bus->dpc_tskcnt);
-+	if (!bus->dpc_triggered) {
-+		bus->dpc_triggered = true;
- 		queue_work(bus->brcmf_wq, &bus->datawork);
- 	}
- }
-@@ -3558,7 +3562,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- 	if (!bus->intr)
- 		brcmf_err("isr w/o interrupt configured!\n");
- 
--	atomic_inc(&bus->dpc_tskcnt);
-+	bus->dpc_triggered = true;
- 	queue_work(bus->brcmf_wq, &bus->datawork);
- }
- 
-@@ -3578,7 +3582,7 @@ static void brcmf_sdio_bus_watchdog(stru
- 		if (!bus->intr ||
- 		    (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
- 
--			if (atomic_read(&bus->dpc_tskcnt) == 0) {
-+			if (!bus->dpc_triggered) {
- 				u8 devpend;
- 
- 				sdio_claim_host(bus->sdiodev->func[1]);
-@@ -3596,7 +3600,7 @@ static void brcmf_sdio_bus_watchdog(stru
- 				bus->sdcnt.pollcnt++;
- 				atomic_set(&bus->ipend, 1);
- 
--				atomic_inc(&bus->dpc_tskcnt);
-+				bus->dpc_triggered = true;
- 				queue_work(bus->brcmf_wq, &bus->datawork);
- 			}
- 		}
-@@ -3623,17 +3627,21 @@ static void brcmf_sdio_bus_watchdog(stru
- #endif				/* DEBUG */
- 
- 	/* On idle timeout clear activity flag and/or turn off clock */
--	if ((atomic_read(&bus->dpc_tskcnt) == 0) &&
--	    (atomic_read(&bus->dpc_running) == 0) &&
--	    (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
--		bus->idlecount++;
--		if (bus->idlecount > bus->idletime) {
--			brcmf_dbg(SDIO, "idle\n");
--			sdio_claim_host(bus->sdiodev->func[1]);
--			brcmf_sdio_wd_timer(bus, 0);
-+	if (!bus->dpc_triggered) {
-+		rmb();
-+		if ((!bus->dpc_running) && (bus->idletime > 0) &&
-+		    (bus->clkstate == CLK_AVAIL)) {
-+			bus->idlecount++;
-+			if (bus->idlecount > bus->idletime) {
-+				brcmf_dbg(SDIO, "idle\n");
-+				sdio_claim_host(bus->sdiodev->func[1]);
-+				brcmf_sdio_wd_timer(bus, 0);
-+				bus->idlecount = 0;
-+				brcmf_sdio_bus_sleep(bus, true, false);
-+				sdio_release_host(bus->sdiodev->func[1]);
-+			}
-+		} else {
- 			bus->idlecount = 0;
--			brcmf_sdio_bus_sleep(bus, true, false);
--			sdio_release_host(bus->sdiodev->func[1]);
- 		}
- 	} else {
- 		bus->idlecount = 0;
-@@ -3645,13 +3653,14 @@ static void brcmf_sdio_dataworker(struct
- 	struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
- 					      datawork);
- 
--	while (atomic_read(&bus->dpc_tskcnt)) {
--		atomic_set(&bus->dpc_running, 1);
--		atomic_set(&bus->dpc_tskcnt, 0);
-+	bus->dpc_running = true;
-+	wmb();
-+	while (ACCESS_ONCE(bus->dpc_triggered)) {
-+		bus->dpc_triggered = false;
- 		brcmf_sdio_dpc(bus);
- 		bus->idlecount = 0;
--		atomic_set(&bus->dpc_running, 0);
- 	}
-+	bus->dpc_running = false;
- 	if (brcmf_sdiod_freezing(bus->sdiodev)) {
- 		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
- 		brcmf_sdiod_try_freeze(bus->sdiodev);
-@@ -4144,8 +4153,8 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- 		bus->watchdog_tsk = NULL;
- 	}
- 	/* Initialize DPC thread */
--	atomic_set(&bus->dpc_tskcnt, 0);
--	atomic_set(&bus->dpc_running, 0);
-+	bus->dpc_triggered = false;
-+	bus->dpc_running = false;
- 
- 	/* Assign bus interface call back */
- 	bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
diff --git a/package/kernel/mac80211/patches/337-0003-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch b/package/kernel/mac80211/patches/337-0003-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch
deleted file mode 100644
index 1bc98a053e..0000000000
--- a/package/kernel/mac80211/patches/337-0003-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:24 +0100
-Subject: [PATCH] brcmfmac: Remove unnecessary new-line in pcie console
- logging.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -651,10 +651,9 @@ static void brcmf_pcie_bus_console_read(
- 			console->log_str[console->log_idx] = ch;
- 			console->log_idx++;
- 		}
--
- 		if (ch == '\n') {
- 			console->log_str[console->log_idx] = 0;
--			brcmf_dbg(PCIE, "CONSOLE: %s\n", console->log_str);
-+			brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str);
- 			console->log_idx = 0;
- 		}
- 	}
diff --git a/package/kernel/mac80211/patches/337-0004-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch b/package/kernel/mac80211/patches/337-0004-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch
deleted file mode 100644
index fcf0bf34f0..0000000000
--- a/package/kernel/mac80211/patches/337-0004-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:25 +0100
-Subject: [PATCH] brcmfmac: add MODULE_FIRMWARE() macros for bcm4356 PCIe
- device
-
-The BCM4356 PCIe wireless device was added recently but overlooked
-the fact that the MODULE_FIRMWARE() macros were missing for the
-firmwares needed by this device.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -189,6 +189,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME
- MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
- 
diff --git a/package/kernel/mac80211/patches/337-0005-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch b/package/kernel/mac80211/patches/337-0005-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch
deleted file mode 100644
index b3e9bc9a07..0000000000
--- a/package/kernel/mac80211/patches/337-0005-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:26 +0100
-Subject: [PATCH] brcmfmac: add support for BCM43430 SDIO chipset
-
-This patch added support for the BCM43430 802.11n SDIO chipset.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1098,6 +1098,7 @@ static const struct sdio_device_id brcmf
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
-+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
- 	{ /* end: all zeroes */ }
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -600,6 +600,12 @@ static void brcmf_chip_socram_ramsize(st
- 		if (sr->chip->pub.chiprev < 2)
- 			*srsize = (32 * 1024);
- 		break;
-+	case BRCM_CC_43430_CHIP_ID:
-+		/* assume sr for now as we can not check
-+		 * firmware sr capability at this point.
-+		 */
-+		*srsize = (64 * 1024);
-+		break;
- 	default:
- 		break;
- 	}
-@@ -1072,6 +1078,7 @@ static void
- brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
-+	struct brcmf_core_priv *sr;
- 
- 	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
-@@ -1081,6 +1088,13 @@ brcmf_chip_cm3_set_passive(struct brcmf_
- 			     D11_BCMA_IOCTL_PHYCLOCKEN);
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM);
- 	brcmf_chip_resetcore(core, 0, 0, 0);
-+
-+	/* disable bank #3 remap for this device */
-+	if (chip->pub.chip == BRCM_CC_43430_CHIP_ID) {
-+		sr = container_of(core, struct brcmf_core_priv, pub);
-+		brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankidx), 3);
-+		brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankpda), 0);
-+	}
- }
- 
- static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
-@@ -1188,6 +1202,10 @@ bool brcmf_chip_sr_capable(struct brcmf_
- 		addr = CORE_CC_REG(base, chipcontrol_data);
- 		reg = chip->ops->read32(chip->ctx, addr);
- 		return (reg & pmu_cc3_mask) != 0;
-+	case BRCM_CC_43430_CHIP_ID:
-+		addr = CORE_CC_REG(base, sr_control1);
-+		reg = chip->ops->read32(chip->ctx, addr);
-+		return reg != 0;
- 	default:
- 		addr = CORE_CC_REG(base, pmucapabilities_ext);
- 		reg = chip->ops->read32(chip->ctx, addr);
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -615,6 +615,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43362_NVRAM_NAME		"brcm/brcmfmac43362-sdio.txt"
- #define BCM4339_FIRMWARE_NAME		"brcm/brcmfmac4339-sdio.bin"
- #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
-+#define BCM43430_FIRMWARE_NAME		"brcm/brcmfmac43430-sdio.bin"
-+#define BCM43430_NVRAM_NAME		"brcm/brcmfmac43430-sdio.txt"
- #define BCM4345_FIRMWARE_NAME		"brcm/brcmfmac4345-sdio.bin"
- #define BCM4345_NVRAM_NAME		"brcm/brcmfmac4345-sdio.txt"
- #define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
-@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43430_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
-@@ -671,6 +675,7 @@ static const struct brcmf_firmware_names
- 	{ BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
- 	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- 	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
-+	{ BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) },
- 	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
- 	{ BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -37,6 +37,7 @@
- #define BRCM_CC_43362_CHIP_ID		43362
- #define BRCM_CC_4335_CHIP_ID		0x4335
- #define BRCM_CC_4339_CHIP_ID		0x4339
-+#define BRCM_CC_43430_CHIP_ID		43430
- #define BRCM_CC_4345_CHIP_ID		0x4345
- #define BRCM_CC_4354_CHIP_ID		0x4354
- #define BRCM_CC_4356_CHIP_ID		0x4356
---- a/drivers/net/wireless/brcm80211/include/chipcommon.h
-+++ b/drivers/net/wireless/brcm80211/include/chipcommon.h
-@@ -183,7 +183,14 @@ struct chipcregs {
- 	u8 uart1lsr;
- 	u8 uart1msr;
- 	u8 uart1scratch;
--	u32 PAD[126];
-+	u32 PAD[62];
-+
-+	/* save/restore, corerev >= 48 */
-+	u32 sr_capability;          /* 0x500 */
-+	u32 sr_control0;            /* 0x504 */
-+	u32 sr_control1;            /* 0x508 */
-+	u32 gpio_control;           /* 0x50C */
-+	u32 PAD[60];
- 
- 	/* PMU registers (corerev >= 20) */
- 	u32 pmucontrol;	/* 0x600 */
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -33,6 +33,7 @@
- #define SDIO_DEVICE_ID_BROADCOM_43341		0xa94d
- #define SDIO_DEVICE_ID_BROADCOM_4335_4339	0x4335
- #define SDIO_DEVICE_ID_BROADCOM_43362		0xa962
-+#define SDIO_DEVICE_ID_BROADCOM_43430		0xa9a6
- #define SDIO_DEVICE_ID_BROADCOM_4345		0x4345
- #define SDIO_DEVICE_ID_BROADCOM_4354		0x4354
- 
diff --git a/package/kernel/mac80211/patches/337-0006-brcmfmac-only-support-the-BCM43455-7-device.patch b/package/kernel/mac80211/patches/337-0006-brcmfmac-only-support-the-BCM43455-7-device.patch
deleted file mode 100644
index c3d7bc2cbf..0000000000
--- a/package/kernel/mac80211/patches/337-0006-brcmfmac-only-support-the-BCM43455-7-device.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:27 +0100
-Subject: [PATCH] brcmfmac: only support the BCM43455/7 device
-
-Recently support was added for the BCM4345 SDIO chipset by
-commit 9c51026509d7 ("brcmfmac: Add support for BCM4345 SDIO chipset")
-however this was verified using a BCM43455 device, which is
-a more recent revision of the chip. This patch assure that
-older revisions are not probed as they would fail.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Syed Asifful Dayyan <syedd@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -617,8 +617,8 @@ static const struct sdiod_drive_str sdio
- #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
- #define BCM43430_FIRMWARE_NAME		"brcm/brcmfmac43430-sdio.bin"
- #define BCM43430_NVRAM_NAME		"brcm/brcmfmac43430-sdio.txt"
--#define BCM4345_FIRMWARE_NAME		"brcm/brcmfmac4345-sdio.bin"
--#define BCM4345_NVRAM_NAME		"brcm/brcmfmac4345-sdio.txt"
-+#define BCM43455_FIRMWARE_NAME		"brcm/brcmfmac43455-sdio.bin"
-+#define BCM43455_NVRAM_NAME		"brcm/brcmfmac43455-sdio.txt"
- #define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
- #define BCM4354_NVRAM_NAME		"brcm/brcmfmac4354-sdio.txt"
- 
-@@ -644,8 +644,8 @@ MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
- MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43430_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43455_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43455_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
- 
-@@ -676,7 +676,7 @@ static const struct brcmf_firmware_names
- 	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- 	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
- 	{ BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) },
--	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
-+	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43455) },
- 	{ BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
- 
diff --git a/package/kernel/mac80211/patches/337-0007-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch b/package/kernel/mac80211/patches/337-0007-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch
deleted file mode 100644
index a62cfdfc4c..0000000000
--- a/package/kernel/mac80211/patches/337-0007-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:28 +0100
-Subject: [PATCH] brcmfmac: remove support for unreleased BCM4354 PCIe
-
-There are no known BCM4354 PCIe devices released so removing
-support from the driver until proven otherwise.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -47,8 +47,6 @@ enum brcmf_pcie_state {
- 
- #define BRCMF_PCIE_43602_FW_NAME		"brcm/brcmfmac43602-pcie.bin"
- #define BRCMF_PCIE_43602_NVRAM_NAME		"brcm/brcmfmac43602-pcie.txt"
--#define BRCMF_PCIE_4354_FW_NAME			"brcm/brcmfmac4354-pcie.bin"
--#define BRCMF_PCIE_4354_NVRAM_NAME		"brcm/brcmfmac4354-pcie.txt"
- #define BRCMF_PCIE_4356_FW_NAME			"brcm/brcmfmac4356-pcie.bin"
- #define BRCMF_PCIE_4356_NVRAM_NAME		"brcm/brcmfmac4356-pcie.txt"
- #define BRCMF_PCIE_43570_FW_NAME		"brcm/brcmfmac43570-pcie.bin"
-@@ -187,8 +185,6 @@ enum brcmf_pcie_state {
- 
- MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
-@@ -1327,10 +1323,6 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_43602_FW_NAME;
- 		nvram_name = BRCMF_PCIE_43602_NVRAM_NAME;
- 		break;
--	case BRCM_CC_4354_CHIP_ID:
--		fw_name = BRCMF_PCIE_4354_FW_NAME;
--		nvram_name = BRCMF_PCIE_4354_NVRAM_NAME;
--		break;
- 	case BRCM_CC_4356_CHIP_ID:
- 		fw_name = BRCMF_PCIE_4356_FW_NAME;
- 		nvram_name = BRCMF_PCIE_4356_NVRAM_NAME;
-@@ -1855,7 +1847,6 @@ cleanup:
- 	PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
- 
- static struct pci_device_id brcmf_pcie_devid_table[] = {
--	BRCMF_PCIE_DEVICE(BRCM_PCIE_4354_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
diff --git a/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch b/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch
new file mode 100644
index 0000000000..229351ba56
--- /dev/null
+++ b/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch
@@ -0,0 +1,26 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Wed, 24 Feb 2016 12:03:13 +0100
+Subject: [PATCH] mac80211: minstrel_ht: fix a logic error in RTS/CTS handling
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's
+a dual-stream rate and the sta is in dynamic SMPS mode.
+
+Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS")
+Reported-by: Matías Richart <mrichart@fing.edu.uy>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -872,7 +872,7 @@ minstrel_ht_set_rate(struct minstrel_pri
+ 	 *  - if station is in dynamic SMPS (and streams > 1)
+ 	 *  - for fallback rates, to increase chances of getting through
+ 	 */
+-	if (offset > 0 &&
++	if (offset > 0 ||
+ 	    (mi->sta->smps_mode == IEEE80211_SMPS_DYNAMIC &&
+ 	     group->streams > 1)) {
+ 		ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts;
diff --git a/package/kernel/mac80211/patches/338-brcmfmac-disable-MBSS-feature-for-BCM43362.patch b/package/kernel/mac80211/patches/338-brcmfmac-disable-MBSS-feature-for-BCM43362.patch
deleted file mode 100644
index 366ff85d03..0000000000
--- a/package/kernel/mac80211/patches/338-brcmfmac-disable-MBSS-feature-for-BCM43362.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Fri, 20 Mar 2015 22:18:17 +0100
-Subject: [PATCH] brcmfmac: disable MBSS feature for BCM43362
-
-The BCM43362 firmware falsely reports it is capable of providing
-MBSS. As a result AP mode no longer works for this device. Therefor
-disable MBSS in the driver for this chipset.
-
-Cc: stable@vger.kernel.org # 3.19.y
-Reported-by: Jorg Krause <jkrause@posteo.de>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -126,7 +126,8 @@ void brcmf_feat_attach(struct brcmf_pub
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
- 	if (drvr->bus_if->wowl_supported)
- 		brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
--	brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
-+	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
-+		brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
- 
- 	/* set chip related quirks */
- 	switch (drvr->bus_if->chip) {
diff --git a/package/kernel/mac80211/patches/339-0001-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch b/package/kernel/mac80211/patches/339-0001-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch
deleted file mode 100644
index 6e461f617f..0000000000
--- a/package/kernel/mac80211/patches/339-0001-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:24 +0200
-Subject: [PATCH] brcmfmac: use static superset of channels for wiphy
- bands
-
-The driver was constructing a list of channels per wiphy band
-by querying the device. This list is not what the hardware is
-able to do as it is already filtered by the country setting in
-the device. As user-space may change the country this would
-require updating the channel list which is not recommended [1].
-This patch introduces a superset of channels. The individual
-channels are disabled appropriately by querying the device.
-
-[1] http://mid.gmane.org/1426706320.3001.21.camel@sipsolutions.net
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -129,13 +129,47 @@ static struct ieee80211_rate __wl_rates[
- 	RATETAB_ENT(BRCM_RATE_54M, 0),
- };
- 
--#define wl_a_rates		(__wl_rates + 4)
--#define wl_a_rates_size	8
- #define wl_g_rates		(__wl_rates + 0)
--#define wl_g_rates_size	12
-+#define wl_g_rates_size		ARRAY_SIZE(__wl_rates)
-+#define wl_a_rates		(__wl_rates + 4)
-+#define wl_a_rates_size		(wl_g_rates_size - 4)
-+
-+#define CHAN2G(_channel, _freq) {				\
-+	.band			= IEEE80211_BAND_2GHZ,		\
-+	.center_freq		= (_freq),			\
-+	.hw_value		= (_channel),			\
-+	.flags			= IEEE80211_CHAN_DISABLED,	\
-+	.max_antenna_gain	= 0,				\
-+	.max_power		= 30,				\
-+}
-+
-+#define CHAN5G(_channel) {					\
-+	.band			= IEEE80211_BAND_5GHZ,		\
-+	.center_freq		= 5000 + (5 * (_channel)),	\
-+	.hw_value		= (_channel),			\
-+	.flags			= IEEE80211_CHAN_DISABLED,	\
-+	.max_antenna_gain	= 0,				\
-+	.max_power		= 30,				\
-+}
-+
-+static struct ieee80211_channel __wl_2ghz_channels[] = {
-+	CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427),
-+	CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447),
-+	CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467),
-+	CHAN2G(13, 2472), CHAN2G(14, 2484)
-+};
-+
-+static struct ieee80211_channel __wl_5ghz_channels[] = {
-+	CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42),
-+	CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56),
-+	CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108),
-+	CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128),
-+	CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149),
-+	CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165)
-+};
- 
- /* Band templates duplicated per wiphy. The channel info
-- * is filled in after querying the device.
-+ * above is added to the band during setup.
-  */
- static const struct ieee80211_supported_band __wl_band_2ghz = {
- 	.band = IEEE80211_BAND_2GHZ,
-@@ -143,7 +177,7 @@ static const struct ieee80211_supported_
- 	.n_bitrates = wl_g_rates_size,
- };
- 
--static const struct ieee80211_supported_band __wl_band_5ghz_a = {
-+static const struct ieee80211_supported_band __wl_band_5ghz = {
- 	.band = IEEE80211_BAND_5GHZ,
- 	.bitrates = wl_a_rates,
- 	.n_bitrates = wl_a_rates_size,
-@@ -5252,40 +5286,6 @@ dongle_scantime_out:
- 	return err;
- }
- 
--/* Filter the list of channels received from firmware counting only
-- * the 20MHz channels. The wiphy band data only needs those which get
-- * flagged to indicate if they can take part in higher bandwidth.
-- */
--static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
--				       struct brcmf_chanspec_list *chlist,
--				       u32 chcnt[])
--{
--	u32 total = le32_to_cpu(chlist->count);
--	struct brcmu_chan ch;
--	int i;
--
--	for (i = 0; i < total; i++) {
--		ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
--		cfg->d11inf.decchspec(&ch);
--
--		/* Firmware gives a ordered list. We skip non-20MHz
--		 * channels is 2G. For 5G we can abort upon reaching
--		 * a non-20MHz channel in the list.
--		 */
--		if (ch.bw != BRCMU_CHAN_BW_20) {
--			if (ch.band == BRCMU_CHAN_BAND_5G)
--				break;
--			else
--				continue;
--		}
--
--		if (ch.band == BRCMU_CHAN_BAND_2G)
--			chcnt[0] += 1;
--		else if (ch.band == BRCMU_CHAN_BAND_5G)
--			chcnt[1] += 1;
--	}
--}
--
- static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel,
- 					   struct brcmu_chan *ch)
- {
-@@ -5321,7 +5321,6 @@ static int brcmf_construct_chaninfo(stru
- 	u32 i, j;
- 	u32 total;
- 	u32 chaninfo;
--	u32 chcnt[2] = { 0, 0 };
- 	u32 index;
- 
- 	pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
-@@ -5338,42 +5337,15 @@ static int brcmf_construct_chaninfo(stru
- 		goto fail_pbuf;
- 	}
- 
--	brcmf_count_20mhz_channels(cfg, list, chcnt);
- 	wiphy = cfg_to_wiphy(cfg);
--	if (chcnt[0]) {
--		band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
--			       GFP_KERNEL);
--		if (band == NULL) {
--			err = -ENOMEM;
--			goto fail_pbuf;
--		}
--		band->channels = kcalloc(chcnt[0], sizeof(*channel),
--					 GFP_KERNEL);
--		if (band->channels == NULL) {
--			kfree(band);
--			err = -ENOMEM;
--			goto fail_pbuf;
--		}
--		band->n_channels = 0;
--		wiphy->bands[IEEE80211_BAND_2GHZ] = band;
--	}
--	if (chcnt[1]) {
--		band = kmemdup(&__wl_band_5ghz_a, sizeof(__wl_band_5ghz_a),
--			       GFP_KERNEL);
--		if (band == NULL) {
--			err = -ENOMEM;
--			goto fail_band2g;
--		}
--		band->channels = kcalloc(chcnt[1], sizeof(*channel),
--					 GFP_KERNEL);
--		if (band->channels == NULL) {
--			kfree(band);
--			err = -ENOMEM;
--			goto fail_band2g;
--		}
--		band->n_channels = 0;
--		wiphy->bands[IEEE80211_BAND_5GHZ] = band;
--	}
-+	band = wiphy->bands[IEEE80211_BAND_2GHZ];
-+	if (band)
-+		for (i = 0; i < band->n_channels; i++)
-+			band->channels[i].flags = IEEE80211_CHAN_DISABLED;
-+	band = wiphy->bands[IEEE80211_BAND_5GHZ];
-+	if (band)
-+		for (i = 0; i < band->n_channels; i++)
-+			band->channels[i].flags = IEEE80211_CHAN_DISABLED;
- 
- 	total = le32_to_cpu(list->count);
- 	for (i = 0; i < total; i++) {
-@@ -5388,6 +5360,8 @@ static int brcmf_construct_chaninfo(stru
- 			brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec);
- 			continue;
- 		}
-+		if (!band)
-+			continue;
- 		if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) &&
- 		    ch.bw == BRCMU_CHAN_BW_40)
- 			continue;
-@@ -5415,9 +5389,9 @@ static int brcmf_construct_chaninfo(stru
- 		} else if (ch.bw == BRCMU_CHAN_BW_40) {
- 			brcmf_update_bw40_channel_flag(&channel[index], &ch);
- 		} else {
--			/* disable other bandwidths for now as mentioned
--			 * order assure they are enabled for subsequent
--			 * chanspecs.
-+			/* enable the channel and disable other bandwidths
-+			 * for now as mentioned order assure they are enabled
-+			 * for subsequent chanspecs.
- 			 */
- 			channel[index].flags = IEEE80211_CHAN_NO_HT40 |
- 					       IEEE80211_CHAN_NO_80MHZ;
-@@ -5436,16 +5410,8 @@ static int brcmf_construct_chaninfo(stru
- 						IEEE80211_CHAN_NO_IR;
- 			}
- 		}
--		if (index == band->n_channels)
--			band->n_channels++;
- 	}
--	kfree(pbuf);
--	return 0;
- 
--fail_band2g:
--	kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
--	kfree(wiphy->bands[IEEE80211_BAND_2GHZ]);
--	wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
- fail_pbuf:
- 	kfree(pbuf);
- 	return err;
-@@ -5778,7 +5744,12 @@ static void brcmf_wiphy_wowl_params(stru
- 
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
-+	struct ieee80211_supported_band *band;
- 	struct ieee80211_iface_combination ifc_combo;
-+	__le32 bandlist[3];
-+	u32 n_bands;
-+	int err, i;
-+
- 	wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
- 	wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
- 	wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
-@@ -5820,7 +5791,52 @@ static int brcmf_setup_wiphy(struct wiph
- 	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL))
- 		brcmf_wiphy_wowl_params(wiphy);
- 
--	return brcmf_setup_wiphybands(wiphy);
-+	err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
-+				     sizeof(bandlist));
-+	if (err) {
-+		brcmf_err("could not obtain band info: err=%d\n", err);
-+		return err;
-+	}
-+	/* first entry in bandlist is number of bands */
-+	n_bands = le32_to_cpu(bandlist[0]);
-+	for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) {
-+		if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) {
-+			band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
-+				       GFP_KERNEL);
-+			if (!band)
-+				return -ENOMEM;
-+
-+			band->channels = kmemdup(&__wl_2ghz_channels,
-+						 sizeof(__wl_2ghz_channels),
-+						 GFP_KERNEL);
-+			if (!band->channels) {
-+				kfree(band);
-+				return -ENOMEM;
-+			}
-+
-+			band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
-+			wiphy->bands[IEEE80211_BAND_2GHZ] = band;
-+		}
-+		if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) {
-+			band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz),
-+				       GFP_KERNEL);
-+			if (!band)
-+				return -ENOMEM;
-+
-+			band->channels = kmemdup(&__wl_5ghz_channels,
-+						 sizeof(__wl_5ghz_channels),
-+						 GFP_KERNEL);
-+			if (!band->channels) {
-+				kfree(band);
-+				return -ENOMEM;
-+			}
-+
-+			band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
-+			wiphy->bands[IEEE80211_BAND_5GHZ] = band;
-+		}
-+	}
-+	err = brcmf_setup_wiphybands(wiphy);
-+	return err;
- }
- 
- static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
-@@ -6011,6 +6027,9 @@ static void brcmf_cfg80211_reg_notifier(
- 
- static void brcmf_free_wiphy(struct wiphy *wiphy)
- {
-+	if (!wiphy)
-+		return;
-+
- 	kfree(wiphy->iface_combinations);
- 	if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- 		kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
diff --git a/package/kernel/mac80211/patches/339-0002-brcmfmac-update-wiphy-band-information-upon-updating.patch b/package/kernel/mac80211/patches/339-0002-brcmfmac-update-wiphy-band-information-upon-updating.patch
deleted file mode 100644
index a0c22eb411..0000000000
--- a/package/kernel/mac80211/patches/339-0002-brcmfmac-update-wiphy-band-information-upon-updating.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:25 +0200
-Subject: [PATCH] brcmfmac: update wiphy band information upon updating
- regulatory domain
-
-When change the country code the available channels may change. So
-the wiphy bands should be updated accordingly.
-
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6022,7 +6022,11 @@ static void brcmf_cfg80211_reg_notifier(
- 	memset(&ccreq, 0, sizeof(ccreq));
- 	ccreq.rev = cpu_to_le32(-1);
- 	memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2));
--	brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
-+	if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) {
-+		brcmf_err("firmware rejected country setting\n");
-+		return;
-+	}
-+	brcmf_setup_wiphybands(wiphy);
- }
- 
- static void brcmf_free_wiphy(struct wiphy *wiphy)
diff --git a/package/kernel/mac80211/patches/339-0003-brcmfmac-add-description-for-feature-flags.patch b/package/kernel/mac80211/patches/339-0003-brcmfmac-add-description-for-feature-flags.patch
deleted file mode 100644
index 193f507d0d..0000000000
--- a/package/kernel/mac80211/patches/339-0003-brcmfmac-add-description-for-feature-flags.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:26 +0200
-Subject: [PATCH] brcmfmac: add description for feature flags
-
-Some feature flags were not described in the header file. Adding
-the description.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -19,7 +19,9 @@
- /*
-  * Features:
-  *
-+ * MBSS: multiple BSSID support (eg. guest network in AP mode).
-  * MCHAN: multi-channel for concurrent P2P.
-+ * WOWL: Wake-On-WLAN.
-  */
- #define BRCMF_FEAT_LIST \
- 	BRCMF_FEAT_DEF(MBSS) \
diff --git a/package/kernel/mac80211/patches/339-0004-brcmfmac-make-scheduled-scan-support-conditional.patch b/package/kernel/mac80211/patches/339-0004-brcmfmac-make-scheduled-scan-support-conditional.patch
deleted file mode 100644
index 42330b474e..0000000000
--- a/package/kernel/mac80211/patches/339-0004-brcmfmac-make-scheduled-scan-support-conditional.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:27 +0200
-Subject: [PATCH] brcmfmac: make scheduled scan support conditional
-
-The scheduled scan support depends on firmware supporting the PNO
-feature. This feature is optional so add a feature flag for this
-in the driver and announce scheduled scan support accordingly.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5782,7 +5782,8 @@ static int brcmf_setup_wiphy(struct wiph
- 		wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
- 	wiphy->mgmt_stypes = brcmf_txrx_stypes;
- 	wiphy->max_remain_on_channel_duration = 5000;
--	brcmf_wiphy_pno_params(wiphy);
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO))
-+		brcmf_wiphy_pno_params(wiphy);
- 
- 	/* vendor commands/events support */
- 	wiphy->vendor_commands = brcmf_vendor_cmds;
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -124,6 +124,7 @@ void brcmf_feat_attach(struct brcmf_pub
- 	struct brcmf_if *ifp = drvr->iflist[0];
- 
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
-+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
- 	if (drvr->bus_if->wowl_supported)
- 		brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
- 	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -21,11 +21,13 @@
-  *
-  * MBSS: multiple BSSID support (eg. guest network in AP mode).
-  * MCHAN: multi-channel for concurrent P2P.
-+ * PNO: preferred network offload.
-  * WOWL: Wake-On-WLAN.
-  */
- #define BRCMF_FEAT_LIST \
- 	BRCMF_FEAT_DEF(MBSS) \
- 	BRCMF_FEAT_DEF(MCHAN) \
-+	BRCMF_FEAT_DEF(PNO) \
- 	BRCMF_FEAT_DEF(WOWL)
- /*
-  * Quirks:
diff --git a/package/kernel/mac80211/patches/339-0005-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch b/package/kernel/mac80211/patches/339-0005-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch
deleted file mode 100644
index b859d46894..0000000000
--- a/package/kernel/mac80211/patches/339-0005-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:28 +0200
-Subject: [PATCH] brcmfmac: add support for BCM4324 rev B5 chipset
-
-This patch adds support for the BCM4324 B5 revision. This device
-is similar to BCM43241 from driver and firmware perspective. It
-is known to be used in Lenovo Thinkpad Tablet devices.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -601,6 +601,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43241B0_NVRAM_NAME		"brcm/brcmfmac43241b0-sdio.txt"
- #define BCM43241B4_FIRMWARE_NAME	"brcm/brcmfmac43241b4-sdio.bin"
- #define BCM43241B4_NVRAM_NAME		"brcm/brcmfmac43241b4-sdio.txt"
-+#define BCM43241B5_FIRMWARE_NAME	"brcm/brcmfmac43241b5-sdio.bin"
-+#define BCM43241B5_NVRAM_NAME		"brcm/brcmfmac43241b5-sdio.txt"
- #define BCM4329_FIRMWARE_NAME		"brcm/brcmfmac4329-sdio.bin"
- #define BCM4329_NVRAM_NAME		"brcm/brcmfmac4329-sdio.txt"
- #define BCM4330_FIRMWARE_NAME		"brcm/brcmfmac4330-sdio.bin"
-@@ -628,6 +630,8 @@ MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME
- MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME);
- MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43241B5_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43241B5_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4329_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
-@@ -667,7 +671,8 @@ enum brcmf_firmware_type {
- static const struct brcmf_firmware_names brcmf_fwname_data[] = {
- 	{ BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) },
- 	{ BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) },
--	{ BRCM_CC_43241_CHIP_ID, 0xFFFFFFE0, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
-+	{ BRCM_CC_43241_CHIP_ID, 0x00000020, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
-+	{ BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43241B5) },
- 	{ BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
- 	{ BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
- 	{ BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
diff --git a/package/kernel/mac80211/patches/339-0006-brcmfmac-process-interrupt-regardless-sdiod-state.patch b/package/kernel/mac80211/patches/339-0006-brcmfmac-process-interrupt-regardless-sdiod-state.patch
deleted file mode 100644
index d420308383..0000000000
--- a/package/kernel/mac80211/patches/339-0006-brcmfmac-process-interrupt-regardless-sdiod-state.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:29 +0200
-Subject: [PATCH] brcmfmac: process interrupt regardless sdiod state
-
-When the sdio bus state is not ready to process we abort the
-interrupt service routine. This is not wanted as it keeps the
-interrupt source active. Better clear the interrupt source.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3555,10 +3555,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- 		return;
- 	}
- 
--	if (bus->sdiodev->state != BRCMF_SDIOD_DATA) {
--		brcmf_err("bus is down. we have nothing to do\n");
--		return;
--	}
- 	/* Count the interrupt call */
- 	bus->sdcnt.intrcount++;
- 	if (in_interrupt())
diff --git a/package/kernel/mac80211/patches/339-0007-brcmfmac-fix-sdio-suspend-and-resume.patch b/package/kernel/mac80211/patches/339-0007-brcmfmac-fix-sdio-suspend-and-resume.patch
deleted file mode 100644
index ac5584ec3c..0000000000
--- a/package/kernel/mac80211/patches/339-0007-brcmfmac-fix-sdio-suspend-and-resume.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:30 +0200
-Subject: [PATCH] brcmfmac: fix sdio suspend and resume
-
-commit 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.")
-changed the behaviour by removing the MMC_PM_KEEP_POWER flag for
-non-wowl scenario, which needs to be restored. Another necessary
-change is to mark the card as being non-removable. With this in place
-the suspend resume test passes successfully doing:
-
- # echo devices > /sys/power/pm_test
- # echo mem > /sys/power/state
-
-Note that power may still be switched off when system is going
-in S3 state.
-
-Reported-by: Fu, Zhonghui <<zhonghui.fu@linux.intel.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1011,6 +1011,14 @@ static int brcmf_sdiod_remove(struct brc
- 	return 0;
- }
- 
-+static void brcmf_sdiod_host_fixup(struct mmc_host *host)
-+{
-+	/* runtime-pm powers off the device */
-+	pm_runtime_forbid(host->parent);
-+	/* avoid removal detection upon resume */
-+	host->caps |= MMC_CAP_NONREMOVABLE;
-+}
-+
- static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
- {
- 	struct sdio_func *func;
-@@ -1076,7 +1084,7 @@ static int brcmf_sdiod_probe(struct brcm
- 		ret = -ENODEV;
- 		goto out;
- 	}
--	pm_runtime_forbid(host->parent);
-+	brcmf_sdiod_host_fixup(host);
- out:
- 	if (ret)
- 		brcmf_sdiod_remove(sdiodev);
-@@ -1246,15 +1254,15 @@ static int brcmf_ops_sdio_suspend(struct
- 	brcmf_sdiod_freezer_on(sdiodev);
- 	brcmf_sdio_wd_timer(sdiodev->bus, 0);
- 
-+	sdio_flags = MMC_PM_KEEP_POWER;
- 	if (sdiodev->wowl_enabled) {
--		sdio_flags = MMC_PM_KEEP_POWER;
- 		if (sdiodev->pdata->oob_irq_supported)
- 			enable_irq_wake(sdiodev->pdata->oob_irq_nr);
- 		else
--			sdio_flags = MMC_PM_WAKE_SDIO_IRQ;
--		if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
--			brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
-+			sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
- 	}
-+	if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
-+		brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
- 	return 0;
- }
- 
diff --git a/package/kernel/mac80211/patches/339-0008-brcmfmac-add-support-for-BCM4358-PCIe-device.patch b/package/kernel/mac80211/patches/339-0008-brcmfmac-add-support-for-BCM4358-PCIe-device.patch
deleted file mode 100644
index a521b65d0f..0000000000
--- a/package/kernel/mac80211/patches/339-0008-brcmfmac-add-support-for-BCM4358-PCIe-device.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:31 +0200
-Subject: [PATCH] brcmfmac: add support for BCM4358 PCIe device
-
-This patch adds support for the BCM4358 2x2 11ac device.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -649,6 +649,7 @@ static u32 brcmf_chip_tcm_rambase(struct
- 	case BRCM_CC_43567_CHIP_ID:
- 	case BRCM_CC_43569_CHIP_ID:
- 	case BRCM_CC_43570_CHIP_ID:
-+	case BRCM_CC_4358_CHIP_ID:
- 	case BRCM_CC_43602_CHIP_ID:
- 		return 0x180000;
- 	default:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -51,6 +51,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_4356_NVRAM_NAME		"brcm/brcmfmac4356-pcie.txt"
- #define BRCMF_PCIE_43570_FW_NAME		"brcm/brcmfmac43570-pcie.bin"
- #define BRCMF_PCIE_43570_NVRAM_NAME		"brcm/brcmfmac43570-pcie.txt"
-+#define BRCMF_PCIE_4358_FW_NAME			"brcm/brcmfmac4358-pcie.bin"
-+#define BRCMF_PCIE_4358_NVRAM_NAME		"brcm/brcmfmac4358-pcie.txt"
- 
- #define BRCMF_PCIE_FW_UP_TIMEOUT		2000 /* msec */
- 
-@@ -189,6 +191,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME)
- MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME);
- 
- 
- struct brcmf_pcie_console {
-@@ -1333,6 +1337,10 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_43570_FW_NAME;
- 		nvram_name = BRCMF_PCIE_43570_NVRAM_NAME;
- 		break;
-+	case BRCM_CC_4358_CHIP_ID:
-+		fw_name = BRCMF_PCIE_4358_FW_NAME;
-+		nvram_name = BRCMF_PCIE_4358_NVRAM_NAME;
-+		break;
- 	default:
- 		brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip);
- 		return -ENODEV;
-@@ -1850,6 +1858,7 @@ static struct pci_device_id brcmf_pcie_d
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4358_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -45,6 +45,7 @@
- #define BRCM_CC_43567_CHIP_ID		43567
- #define BRCM_CC_43569_CHIP_ID		43569
- #define BRCM_CC_43570_CHIP_ID		43570
-+#define BRCM_CC_4358_CHIP_ID		0x4358
- #define BRCM_CC_43602_CHIP_ID		43602
- 
- /* USB Device IDs */
-@@ -59,6 +60,7 @@
- #define BRCM_PCIE_4356_DEVICE_ID	0x43ec
- #define BRCM_PCIE_43567_DEVICE_ID	0x43d3
- #define BRCM_PCIE_43570_DEVICE_ID	0x43d9
-+#define BRCM_PCIE_4358_DEVICE_ID	0x43e9
- #define BRCM_PCIE_43602_DEVICE_ID	0x43ba
- #define BRCM_PCIE_43602_2G_DEVICE_ID	0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID	0x43bc
diff --git a/package/kernel/mac80211/patches/339-0009-brcmfmac-add-additional-43602-pcie-device-id.patch b/package/kernel/mac80211/patches/339-0009-brcmfmac-add-additional-43602-pcie-device-id.patch
deleted file mode 100644
index bcbb984d42..0000000000
--- a/package/kernel/mac80211/patches/339-0009-brcmfmac-add-additional-43602-pcie-device-id.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:32 +0200
-Subject: [PATCH] brcmfmac: add additional 43602 pcie device id.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1862,6 +1862,7 @@ static struct pci_device_id brcmf_pcie_d
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_RAW_DEVICE_ID),
- 	{ /* end: all zeroes */ }
- };
- 
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -64,6 +64,7 @@
- #define BRCM_PCIE_43602_DEVICE_ID	0x43ba
- #define BRCM_PCIE_43602_2G_DEVICE_ID	0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID	0x43bc
-+#define BRCM_PCIE_43602_RAW_DEVICE_ID	43602
- 
- /* brcmsmac IDs */
- #define BCM4313_D11N2G_ID	0x4727	/* 4313 802.11n 2.4G device */
diff --git a/package/kernel/mac80211/patches/339-0010-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch b/package/kernel/mac80211/patches/339-0010-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch
deleted file mode 100644
index 5f9bbeaf5c..0000000000
--- a/package/kernel/mac80211/patches/339-0010-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:33 +0200
-Subject: [PATCH] brcmfmac: Add support for multiple PCIE devices in
- nvram.
-
-With PCIE it is possible to support multiple devices with the
-same device type. They all load the same nvram file. In order to
-support this the nvram can specify which part of the nvram is
-for which pcie device. This patch adds support for these new
-types of nvram files.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -23,6 +23,10 @@
- #include "debug.h"
- #include "firmware.h"
- 
-+#define BRCMF_FW_MAX_NVRAM_SIZE			64000
-+#define BRCMF_FW_NVRAM_DEVPATH_LEN		19	/* devpath0=pcie/1/4/ */
-+#define BRCMF_FW_NVRAM_PCIEDEV_LEN		9	/* pcie/1/4/ */
-+
- char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
- module_param_string(firmware_path, brcmf_firmware_path,
- 		    BRCMF_FW_PATH_LEN, 0440);
-@@ -46,6 +50,8 @@ enum nvram_parser_state {
-  * @column: current column in line.
-  * @pos: byte offset in input buffer.
-  * @entry: start position of key,value entry.
-+ * @multi_dev_v1: detect pcie multi device v1 (compressed).
-+ * @multi_dev_v2: detect pcie multi device v2.
-  */
- struct nvram_parser {
- 	enum nvram_parser_state state;
-@@ -56,6 +62,8 @@ struct nvram_parser {
- 	u32 column;
- 	u32 pos;
- 	u32 entry;
-+	bool multi_dev_v1;
-+	bool multi_dev_v2;
- };
- 
- static bool is_nvram_char(char c)
-@@ -108,6 +116,10 @@ static enum nvram_parser_state brcmf_nvr
- 			st = COMMENT;
- 		else
- 			st = VALUE;
-+		if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0)
-+			nvp->multi_dev_v1 = true;
-+		if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
-+			nvp->multi_dev_v2 = true;
- 	} else if (!is_nvram_char(c)) {
- 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
- 			  nvp->line, nvp->column);
-@@ -133,6 +145,8 @@ brcmf_nvram_handle_value(struct nvram_pa
- 		ekv = (u8 *)&nvp->fwnv->data[nvp->pos];
- 		skv = (u8 *)&nvp->fwnv->data[nvp->entry];
- 		cplen = ekv - skv;
-+		if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE)
-+			return END;
- 		/* copy to output buffer */
- 		memcpy(&nvp->nvram[nvp->nvram_len], skv, cplen);
- 		nvp->nvram_len += cplen;
-@@ -180,10 +194,18 @@ static enum nvram_parser_state
- static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
- 				   const struct firmware *nv)
- {
-+	size_t size;
-+
- 	memset(nvp, 0, sizeof(*nvp));
- 	nvp->fwnv = nv;
-+	/* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */
-+	if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE)
-+		size = BRCMF_FW_MAX_NVRAM_SIZE;
-+	else
-+		size = nv->size;
- 	/* Alloc for extra 0 byte + roundup by 4 + length field */
--	nvp->nvram = kzalloc(nv->size + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+	size += 1 + 3 + sizeof(u32);
-+	nvp->nvram = kzalloc(size, GFP_KERNEL);
- 	if (!nvp->nvram)
- 		return -ENOMEM;
- 
-@@ -192,12 +214,136 @@ static int brcmf_init_nvram_parser(struc
- 	return 0;
- }
- 
-+/* brcmf_fw_strip_multi_v1 :Some nvram files contain settings for multiple
-+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
-+ * which data is to be returned. v1 is the version where nvram is stored
-+ * compressed and "devpath" maps to index for valid entries.
-+ */
-+static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr,
-+				    u16 bus_nr)
-+{
-+	u32 i, j;
-+	bool found;
-+	u8 *nvram;
-+	u8 id;
-+
-+	nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+	if (!nvram)
-+		goto fail;
-+
-+	/* min length: devpath0=pcie/1/4/ + 0:x=y */
-+	if (nvp->nvram_len < BRCMF_FW_NVRAM_DEVPATH_LEN + 6)
-+		goto fail;
-+
-+	/* First search for the devpathX and see if it is the configuration
-+	 * for domain_nr/bus_nr. Search complete nvp
-+	 */
-+	found = false;
-+	i = 0;
-+	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) {
-+		/* Format: devpathX=pcie/Y/Z/
-+		 * Y = domain_nr, Z = bus_nr, X = virtual ID
-+		 */
-+		if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
-+		    (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) {
-+			if (((nvp->nvram[i + 14] - '0') == domain_nr) &&
-+			    ((nvp->nvram[i + 16] - '0') == bus_nr)) {
-+				id = nvp->nvram[i + 7] - '0';
-+				found = true;
-+				break;
-+			}
-+		}
-+		while (nvp->nvram[i] != 0)
-+			i++;
-+		i++;
-+	}
-+	if (!found)
-+		goto fail;
-+
-+	/* Now copy all valid entries, release old nvram and assign new one */
-+	i = 0;
-+	j = 0;
-+	while (i < nvp->nvram_len) {
-+		if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) {
-+			i += 2;
-+			while (nvp->nvram[i] != 0) {
-+				nvram[j] = nvp->nvram[i];
-+				i++;
-+				j++;
-+			}
-+			nvram[j] = 0;
-+			j++;
-+		}
-+		while (nvp->nvram[i] != 0)
-+			i++;
-+		i++;
-+	}
-+	kfree(nvp->nvram);
-+	nvp->nvram = nvram;
-+	nvp->nvram_len = j;
-+	return;
-+
-+fail:
-+	kfree(nvram);
-+	nvp->nvram_len = 0;
-+}
-+
-+/* brcmf_fw_strip_multi_v2 :Some nvram files contain settings for multiple
-+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
-+ * which data is to be returned. v2 is the version where nvram is stored
-+ * uncompressed, all relevant valid entries are identified by
-+ * pcie/domain_nr/bus_nr:
-+ */
-+static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr,
-+				    u16 bus_nr)
-+{
-+	u32 i, j;
-+	u8 *nvram;
-+
-+	nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+	if (!nvram)
-+		goto fail;
-+
-+	/* Copy all valid entries, release old nvram and assign new one.
-+	 * Valid entries are of type pcie/X/Y/ where X = domain_nr and
-+	 * Y = bus_nr.
-+	 */
-+	i = 0;
-+	j = 0;
-+	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) {
-+		if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) &&
-+		    (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') &&
-+		    ((nvp->nvram[i + 5] - '0') == domain_nr) &&
-+		    ((nvp->nvram[i + 7] - '0') == bus_nr)) {
-+			i += BRCMF_FW_NVRAM_PCIEDEV_LEN;
-+			while (nvp->nvram[i] != 0) {
-+				nvram[j] = nvp->nvram[i];
-+				i++;
-+				j++;
-+			}
-+			nvram[j] = 0;
-+			j++;
-+		}
-+		while (nvp->nvram[i] != 0)
-+			i++;
-+		i++;
-+	}
-+	kfree(nvp->nvram);
-+	nvp->nvram = nvram;
-+	nvp->nvram_len = j;
-+	return;
-+fail:
-+	kfree(nvram);
-+	nvp->nvram_len = 0;
-+}
-+
- /* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil
-  * and ending in a NUL. Removes carriage returns, empty lines, comment lines,
-  * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
-  * End of buffer is completed with token identifying length of buffer.
-  */
--static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length)
-+static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length,
-+				  u16 domain_nr, u16 bus_nr)
- {
- 	struct nvram_parser nvp;
- 	u32 pad;
-@@ -212,6 +358,16 @@ static void *brcmf_fw_nvram_strip(const
- 		if (nvp.state == END)
- 			break;
- 	}
-+	if (nvp.multi_dev_v1)
-+		brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr);
-+	else if (nvp.multi_dev_v2)
-+		brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr);
-+
-+	if (nvp.nvram_len == 0) {
-+		kfree(nvp.nvram);
-+		return NULL;
-+	}
-+
- 	pad = nvp.nvram_len;
- 	*new_length = roundup(nvp.nvram_len + 1, 4);
- 	while (pad != *new_length) {
-@@ -239,6 +395,8 @@ struct brcmf_fw {
- 	u16 flags;
- 	const struct firmware *code;
- 	const char *nvram_name;
-+	u16 domain_nr;
-+	u16 bus_nr;
- 	void (*done)(struct device *dev, const struct firmware *fw,
- 		     void *nvram_image, u32 nvram_len);
- };
-@@ -254,7 +412,8 @@ static void brcmf_fw_request_nvram_done(
- 		goto fail;
- 
- 	if (fw) {
--		nvram = brcmf_fw_nvram_strip(fw, &nvram_length);
-+		nvram = brcmf_fw_nvram_strip(fw, &nvram_length,
-+					     fwctx->domain_nr, fwctx->bus_nr);
- 		release_firmware(fw);
- 		if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
- 			goto fail;
-@@ -309,11 +468,12 @@ fail:
- 	kfree(fwctx);
- }
- 
--int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
--			   const char *code, const char *nvram,
--			   void (*fw_cb)(struct device *dev,
--					 const struct firmware *fw,
--					 void *nvram_image, u32 nvram_len))
-+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
-+				const char *code, const char *nvram,
-+				void (*fw_cb)(struct device *dev,
-+					      const struct firmware *fw,
-+					      void *nvram_image, u32 nvram_len),
-+				u16 domain_nr, u16 bus_nr)
- {
- 	struct brcmf_fw *fwctx;
- 
-@@ -333,8 +493,21 @@ int brcmf_fw_get_firmwares(struct device
- 	fwctx->done = fw_cb;
- 	if (flags & BRCMF_FW_REQUEST_NVRAM)
- 		fwctx->nvram_name = nvram;
-+	fwctx->domain_nr = domain_nr;
-+	fwctx->bus_nr = bus_nr;
- 
- 	return request_firmware_nowait(THIS_MODULE, true, code, dev,
- 				       GFP_KERNEL, fwctx,
- 				       brcmf_fw_request_code_done);
- }
-+
-+int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
-+			   const char *code, const char *nvram,
-+			   void (*fw_cb)(struct device *dev,
-+					 const struct firmware *fw,
-+					 void *nvram_image, u32 nvram_len))
-+{
-+	return brcmf_fw_get_firmwares_pcie(dev, flags, code, nvram, fw_cb, 0,
-+					   0);
-+}
-+
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-@@ -32,6 +32,12 @@ void brcmf_fw_nvram_free(void *nvram);
-  * fails it will not use the callback, but call device_release_driver()
-  * instead which will call the driver .remove() callback.
-  */
-+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
-+				const char *code, const char *nvram,
-+				void (*fw_cb)(struct device *dev,
-+					      const struct firmware *fw,
-+					      void *nvram_image, u32 nvram_len),
-+				u16 domain_nr, u16 bus_nr);
- int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
- 			   const char *code, const char *nvram,
- 			   void (*fw_cb)(struct device *dev,
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1649,8 +1649,13 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- 	struct brcmf_pciedev_info *devinfo;
- 	struct brcmf_pciedev *pcie_bus_dev;
- 	struct brcmf_bus *bus;
-+	u16 domain_nr;
-+	u16 bus_nr;
- 
--	brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
-+	domain_nr = pci_domain_nr(pdev->bus) + 1;
-+	bus_nr = pdev->bus->number;
-+	brcmf_dbg(PCIE, "Enter %x:%x (%d/%d)\n", pdev->vendor, pdev->device,
-+		  domain_nr, bus_nr);
- 
- 	ret = -ENOMEM;
- 	devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
-@@ -1699,10 +1704,10 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- 	if (ret)
- 		goto fail_bus;
- 
--	ret = brcmf_fw_get_firmwares(bus->dev, BRCMF_FW_REQUEST_NVRAM |
--					       BRCMF_FW_REQ_NV_OPTIONAL,
--				     devinfo->fw_name, devinfo->nvram_name,
--				     brcmf_pcie_setup);
-+	ret = brcmf_fw_get_firmwares_pcie(bus->dev, BRCMF_FW_REQUEST_NVRAM |
-+						    BRCMF_FW_REQ_NV_OPTIONAL,
-+					  devinfo->fw_name, devinfo->nvram_name,
-+					  brcmf_pcie_setup, domain_nr, bus_nr);
- 	if (ret == 0)
- 		return 0;
- fail_bus:
diff --git a/package/kernel/mac80211/patches/340-brcmfmac-cleanup-a-sizeof.patch b/package/kernel/mac80211/patches/340-brcmfmac-cleanup-a-sizeof.patch
deleted file mode 100644
index d26e118d77..0000000000
--- a/package/kernel/mac80211/patches/340-brcmfmac-cleanup-a-sizeof.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Thu, 7 May 2015 12:59:19 +0300
-Subject: [PATCH] brcmfmac: cleanup a sizeof()
-
-"flowrings" and "*flowrings" are both pointers so this always returns
-sizeof(void *) and the current code works fine.  But "*flowrings" is
-intended here and static checkers complain, so lets change it.
-
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1617,7 +1617,7 @@ static void brcmf_pcie_setup(struct devi
- 		bus->msgbuf->commonrings[i] =
- 				&devinfo->shared.commonrings[i]->commonring;
- 
--	flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(flowrings),
-+	flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*flowrings),
- 			    GFP_KERNEL);
- 	if (!flowrings)
- 		goto fail;
diff --git a/package/kernel/mac80211/patches/341-brcmfmac-check-result-of-USB-firmware-request.patch b/package/kernel/mac80211/patches/341-brcmfmac-check-result-of-USB-firmware-request.patch
deleted file mode 100644
index 9b2880d8fc..0000000000
--- a/package/kernel/mac80211/patches/341-brcmfmac-check-result-of-USB-firmware-request.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 7 May 2015 14:13:03 +0200
-Subject: [PATCH] brcmfmac: check result of USB firmware request
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This prevents silence failures with driver waiting (infinitely) for a
-callback.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-@@ -1270,8 +1270,13 @@ static int brcmf_usb_probe_cb(struct brc
- 	bus->chiprev = bus_pub->chiprev;
- 
- 	/* request firmware here */
--	brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
--			       brcmf_usb_probe_phase2);
-+	ret = brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo),
-+				     NULL, brcmf_usb_probe_phase2);
-+	if (ret) {
-+		brcmf_err("firmware request failed: %d\n", ret);
-+		goto fail;
-+	}
-+
- 	return 0;
- 
- fail:
diff --git a/package/kernel/mac80211/patches/342-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch b/package/kernel/mac80211/patches/342-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch
deleted file mode 100644
index d46b300daa..0000000000
--- a/package/kernel/mac80211/patches/342-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: "Fu, Zhonghui" <zhonghui.fu@linux.intel.com>
-Date: Mon, 11 May 2015 10:41:32 +0800
-Subject: [PATCH] brcmfmac: prohibit ACPI power management for brcmfmac driver
-
-ACPI will manage WiFi chip's power state during suspend/resume
-process on some tablet platforms(such as ASUS T100TA). This is
-not supported by brcmfmac driver now, and the context of WiFi
-chip will be damaged after resume. This patch informs ACPI not
-to manage WiFi chip's power state.
-
-Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -33,6 +33,7 @@
- #include <linux/suspend.h>
- #include <linux/errno.h>
- #include <linux/module.h>
-+#include <linux/acpi.h>
- #include <net/cfg80211.h>
- 
- #include <defs.h>
-@@ -1122,6 +1123,8 @@ static int brcmf_ops_sdio_probe(struct s
- 	int err;
- 	struct brcmf_sdio_dev *sdiodev;
- 	struct brcmf_bus *bus_if;
-+	struct device *dev;
-+	struct acpi_device *adev;
- 
- 	brcmf_dbg(SDIO, "Enter\n");
- 	brcmf_dbg(SDIO, "Class=%x\n", func->class);
-@@ -1129,6 +1132,12 @@ static int brcmf_ops_sdio_probe(struct s
- 	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- 	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
- 
-+	/* prohibit ACPI power management for this device */
-+	dev = &func->dev;
-+	adev = ACPI_COMPANION(dev);
-+	if (adev)
-+		adev->flags.power_manageable = 0;
-+
- 	/* Consume func num 1 but dont do anything with it. */
- 	if (func->num == 1)
- 		return 0;
diff --git a/package/kernel/mac80211/patches/343-brcmfmac-avoid-gcc-5.1-warning.patch b/package/kernel/mac80211/patches/343-brcmfmac-avoid-gcc-5.1-warning.patch
deleted file mode 100644
index 9b4609fb75..0000000000
--- a/package/kernel/mac80211/patches/343-brcmfmac-avoid-gcc-5.1-warning.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 12 May 2015 23:54:25 +0200
-Subject: [PATCH] brcmfmac: avoid gcc-5.1 warning
-
-gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac
-driver:
-
-drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process':
-drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]
-
-This is a false positive, and marking the brcmf_fws_hanger_poppkt function
-as 'static inline' makes the warning go away. I have checked the object
-file output and while a little code gets moved around, the size of
-the binary remains identical.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -635,7 +635,7 @@ static int brcmf_fws_hanger_pushpkt(stru
- 	return 0;
- }
- 
--static int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
-+static inline int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
- 					  u32 slot_id, struct sk_buff **pktout,
- 					  bool remove_item)
- {
diff --git a/package/kernel/mac80211/patches/344-0001-brcmfmac-allow-device-tree-node-without-interrupts-p.patch b/package/kernel/mac80211/patches/344-0001-brcmfmac-allow-device-tree-node-without-interrupts-p.patch
deleted file mode 100644
index b16782d593..0000000000
--- a/package/kernel/mac80211/patches/344-0001-brcmfmac-allow-device-tree-node-without-interrupts-p.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 20 May 2015 14:09:47 +0200
-Subject: [PATCH] brcmfmac: allow device tree node without 'interrupts'
- property
-
-As described in the device tree bindings for 'brcm,bcm4329-fmac'
-nodes, the interrupts property is optional. So adding a check
-for the presence of this property before attempting to parse
-and map the interrupt. If not present or parsing fails return
-and fallback to in-band sdio interrupt.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/of.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/of.c
-@@ -39,10 +39,16 @@ void brcmf_of_probe(struct brcmf_sdio_de
- 	if (!sdiodev->pdata)
- 		return;
- 
-+	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
-+		sdiodev->pdata->drive_strength = val;
-+
-+	/* make sure there are interrupts defined in the node */
-+	if (!of_find_property(np, "interrupts", NULL))
-+		return;
-+
- 	irq = irq_of_parse_and_map(np, 0);
- 	if (!irq) {
- 		brcmf_err("interrupt could not be mapped\n");
--		devm_kfree(dev, sdiodev->pdata);
- 		return;
- 	}
- 	irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
-@@ -50,7 +56,4 @@ void brcmf_of_probe(struct brcmf_sdio_de
- 	sdiodev->pdata->oob_irq_supported = true;
- 	sdiodev->pdata->oob_irq_nr = irq;
- 	sdiodev->pdata->oob_irq_flags = irqf;
--
--	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
--		sdiodev->pdata->drive_strength = val;
- }
diff --git a/package/kernel/mac80211/patches/344-0002-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch b/package/kernel/mac80211/patches/344-0002-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch
deleted file mode 100644
index f81250ee4c..0000000000
--- a/package/kernel/mac80211/patches/344-0002-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 20 May 2015 14:09:48 +0200
-Subject: [PATCH] brcmfmac: Improve throughput by scheduling msbug flow worker.
-
-The tx flow worker in msgbuf gets scheduled at tx till a certain
-threshold has been reached. Then the tx completes will take over
-the scheduling. When amsdu and ampdu is used the frames are
-transferred wireless in a very bulky fashion, in combination
-with this scheduling algorithm and buffer limiters in the stack
-this can result in limited throughput. This change causes the
-flow worker to be scheduled more frequently from tx.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-@@ -249,8 +249,8 @@ void brcmf_flowring_delete(struct brcmf_
- }
- 
- 
--void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
--			    struct sk_buff *skb)
-+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-+			   struct sk_buff *skb)
- {
- 	struct brcmf_flowring_ring *ring;
- 
-@@ -271,6 +271,7 @@ void brcmf_flowring_enqueue(struct brcmf
- 		if (skb_queue_len(&ring->skblist) < BRCMF_FLOWRING_LOW)
- 			brcmf_flowring_block(flow, flowid, false);
- 	}
-+	return skb_queue_len(&ring->skblist);
- }
- 
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-@@ -64,8 +64,8 @@ u32 brcmf_flowring_create(struct brcmf_f
- void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid);
- void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid);
- u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid);
--void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
--			    struct sk_buff *skb);
-+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-+			   struct sk_buff *skb);
- struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid);
- void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid,
- 			     struct sk_buff *skb);
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -73,7 +73,7 @@
- #define BRCMF_MSGBUF_TX_FLUSH_CNT1		32
- #define BRCMF_MSGBUF_TX_FLUSH_CNT2		96
- 
--#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS	64
-+#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS	96
- #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS	32
- 
- struct msgbuf_common_hdr {
-@@ -797,6 +797,8 @@ static int brcmf_msgbuf_txdata(struct br
- 	struct brcmf_flowring *flow = msgbuf->flow;
- 	struct ethhdr *eh = (struct ethhdr *)(skb->data);
- 	u32 flowid;
-+	u32 queue_count;
-+	bool force;
- 
- 	flowid = brcmf_flowring_lookup(flow, eh->h_dest, skb->priority, ifidx);
- 	if (flowid == BRCMF_FLOWRING_INVALID_ID) {
-@@ -804,8 +806,9 @@ static int brcmf_msgbuf_txdata(struct br
- 		if (flowid == BRCMF_FLOWRING_INVALID_ID)
- 			return -ENOMEM;
- 	}
--	brcmf_flowring_enqueue(flow, flowid, skb);
--	brcmf_msgbuf_schedule_txdata(msgbuf, flowid, false);
-+	queue_count = brcmf_flowring_enqueue(flow, flowid, skb);
-+	force = ((queue_count % BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS) == 0);
-+	brcmf_msgbuf_schedule_txdata(msgbuf, flowid, force);
- 
- 	return 0;
- }
diff --git a/package/kernel/mac80211/patches/344-0003-brcmfmac-remove-pci-shared-structure-rev4-support.patch b/package/kernel/mac80211/patches/344-0003-brcmfmac-remove-pci-shared-structure-rev4-support.patch
deleted file mode 100644
index 61153c4a98..0000000000
--- a/package/kernel/mac80211/patches/344-0003-brcmfmac-remove-pci-shared-structure-rev4-support.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:49 +0200
-Subject: [PATCH] brcmfmac: remove pci shared structure rev4 support
-
-All pcie full dongle chips supported by fmac are using rev 5+ shared
-structure. This patch removes the rev4 related code.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -112,10 +112,9 @@ enum brcmf_pcie_state {
- 						 BRCMF_PCIE_MB_INT_D2H3_DB0 | \
- 						 BRCMF_PCIE_MB_INT_D2H3_DB1)
- 
--#define BRCMF_PCIE_MIN_SHARED_VERSION		4
-+#define BRCMF_PCIE_MIN_SHARED_VERSION		5
- #define BRCMF_PCIE_MAX_SHARED_VERSION		5
- #define BRCMF_PCIE_SHARED_VERSION_MASK		0x00FF
--#define BRCMF_PCIE_SHARED_TXPUSH_SUPPORT	0x4000
- 
- #define BRCMF_PCIE_FLAGS_HTOD_SPLIT		0x4000
- #define BRCMF_PCIE_FLAGS_DTOH_SPLIT		0x8000
-@@ -1280,11 +1279,6 @@ brcmf_pcie_init_share_ram_info(struct br
- 		brcmf_err("Unsupported PCIE version %d\n", version);
- 		return -EINVAL;
- 	}
--	if (shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT) {
--		brcmf_err("Unsupported legacy TX mode 0x%x\n",
--			  shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT);
--		return -EINVAL;
--	}
- 
- 	addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET;
- 	shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr);
diff --git a/package/kernel/mac80211/patches/344-0004-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch b/package/kernel/mac80211/patches/344-0004-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch
deleted file mode 100644
index 8c8eebe44f..0000000000
--- a/package/kernel/mac80211/patches/344-0004-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:50 +0200
-Subject: [PATCH] brcmfmac: remove dummy cache flush/invalidate function
-
-brcmf_dma_flush and brcmf_dma_invalidate_cache are not necessary and
-have never been implemented.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-@@ -22,17 +22,6 @@
- #include "core.h"
- #include "commonring.h"
- 
--
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- * SEE ALSO msgbuf.c
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- void brcmf_commonring_register_cb(struct brcmf_commonring *commonring,
- 				  int (*cr_ring_bell)(void *ctx),
- 				  int (*cr_update_rptr)(void *ctx),
-@@ -206,14 +195,9 @@ int brcmf_commonring_write_complete(stru
- 	address = commonring->buf_addr;
- 	address += (commonring->f_ptr * commonring->item_len);
- 	if (commonring->f_ptr > commonring->w_ptr) {
--		brcmf_dma_flush(address,
--				(commonring->depth - commonring->f_ptr) *
--				commonring->item_len);
- 		address = commonring->buf_addr;
- 		commonring->f_ptr = 0;
- 	}
--	brcmf_dma_flush(address, (commonring->w_ptr - commonring->f_ptr) *
--			commonring->item_len);
- 
- 	commonring->f_ptr = commonring->w_ptr;
- 
-@@ -258,8 +242,6 @@ void *brcmf_commonring_get_read_ptr(stru
- 	if (commonring->r_ptr == commonring->depth)
- 		commonring->r_ptr = 0;
- 
--	brcmf_dma_invalidate_cache(ret_addr, *n_ items * commonring->item_len);
--
- 	return ret_addr;
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -278,16 +278,6 @@ struct brcmf_msgbuf_pktids {
- 	struct brcmf_msgbuf_pktid *array;
- };
- 
--
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- static void brcmf_msgbuf_rxbuf_ioctlresp_post(struct brcmf_msgbuf *msgbuf);
- 
- 
-@@ -462,7 +452,6 @@ static int brcmf_msgbuf_tx_ioctl(struct
- 		memcpy(msgbuf->ioctbuf, buf, buf_len);
- 	else
- 		memset(msgbuf->ioctbuf, 0, buf_len);
--	brcmf_dma_flush(ioctl_buf, buf_len);
- 
- 	err = brcmf_commonring_write_complete(commonring);
- 	brcmf_commonring_unlock(commonring);
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -276,15 +276,6 @@ static const u32 brcmf_ring_itemsize[BRC
- };
- 
- 
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- static u32
- brcmf_pcie_read_reg32(struct brcmf_pciedev_info *devinfo, u32 reg_offset)
- {
-@@ -1174,7 +1165,6 @@ static int brcmf_pcie_init_scratchbuffer
- 		goto fail;
- 
- 	memset(devinfo->shared.scratch, 0, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
--	brcmf_dma_flush(devinfo->shared.scratch, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
- 
- 	addr = devinfo->shared.tcm_base_address +
- 	       BRCMF_SHARED_DMA_SCRATCH_ADDR_OFFSET;
-@@ -1192,7 +1182,6 @@ static int brcmf_pcie_init_scratchbuffer
- 		goto fail;
- 
- 	memset(devinfo->shared.ringupd, 0, BRCMF_DMA_D2H_RINGUPD_BUF_LEN);
--	brcmf_dma_flush(devinfo->shared.ringupd, BRCMF_DMA_D2H_RINGUPD_BUF_LEN);
- 
- 	addr = devinfo->shared.tcm_base_address +
- 	       BRCMF_SHARED_DMA_RINGUPD_ADDR_OFFSET;
diff --git a/package/kernel/mac80211/patches/344-0005-brcmfmac-add-support-for-dma-indices-feature.patch b/package/kernel/mac80211/patches/344-0005-brcmfmac-add-support-for-dma-indices-feature.patch
deleted file mode 100644
index 2f50abd0e1..0000000000
--- a/package/kernel/mac80211/patches/344-0005-brcmfmac-add-support-for-dma-indices-feature.patch
+++ /dev/null
@@ -1,270 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:51 +0200
-Subject: [PATCH] brcmfmac: add support for dma indices feature
-
-PCIe full dongle firmware can support a dma indices feature with which
-firmware can update/fetch the read/write indices of message buffer
-rings on both host to dongle and dongle to host directions. The support is
-announced by firmware through shared flags.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -115,6 +115,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_MIN_SHARED_VERSION		5
- #define BRCMF_PCIE_MAX_SHARED_VERSION		5
- #define BRCMF_PCIE_SHARED_VERSION_MASK		0x00FF
-+#define BRCMF_PCIE_SHARED_DMA_INDEX		0x10000
-+#define BRCMF_PCIE_SHARED_DMA_2B_IDX		0x100000
- 
- #define BRCMF_PCIE_FLAGS_HTOD_SPLIT		0x4000
- #define BRCMF_PCIE_FLAGS_DTOH_SPLIT		0x8000
-@@ -146,6 +148,10 @@ enum brcmf_pcie_state {
- #define BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET	8
- #define BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET	12
- #define BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET	16
-+#define BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET	20
-+#define BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET	28
-+#define BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET	36
-+#define BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET	44
- #define BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET	0
- #define BRCMF_SHARED_RING_MAX_SUB_QUEUES	52
- 
-@@ -247,6 +253,13 @@ struct brcmf_pciedev_info {
- 	bool mbdata_completed;
- 	bool irq_allocated;
- 	bool wowl_enabled;
-+	u8 dma_idx_sz;
-+	void *idxbuf;
-+	u32 idxbuf_sz;
-+	dma_addr_t idxbuf_dmahandle;
-+	u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset);
-+	void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
-+			  u16 value);
- };
- 
- struct brcmf_pcie_ringbuf {
-@@ -323,6 +336,25 @@ brcmf_pcie_write_tcm16(struct brcmf_pcie
- }
- 
- 
-+static u16
-+brcmf_pcie_read_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset)
-+{
-+	u16 *address = devinfo->idxbuf + mem_offset;
-+
-+	return (*(address));
-+}
-+
-+
-+static void
-+brcmf_pcie_write_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
-+		     u16 value)
-+{
-+	u16 *address = devinfo->idxbuf + mem_offset;
-+
-+	*(address) = value;
-+}
-+
-+
- static u32
- brcmf_pcie_read_tcm32(struct brcmf_pciedev_info *devinfo, u32 mem_offset)
- {
-@@ -868,7 +900,7 @@ static int brcmf_pcie_ring_mb_write_rptr
- 	brcmf_dbg(PCIE, "W r_ptr %d (%d), ring %d\n", commonring->r_ptr,
- 		  commonring->w_ptr, ring->id);
- 
--	brcmf_pcie_write_tcm16(devinfo, ring->r_idx_addr, commonring->r_ptr);
-+	devinfo->write_ptr(devinfo, ring->r_idx_addr, commonring->r_ptr);
- 
- 	return 0;
- }
-@@ -886,7 +918,7 @@ static int brcmf_pcie_ring_mb_write_wptr
- 	brcmf_dbg(PCIE, "W w_ptr %d (%d), ring %d\n", commonring->w_ptr,
- 		  commonring->r_ptr, ring->id);
- 
--	brcmf_pcie_write_tcm16(devinfo, ring->w_idx_addr, commonring->w_ptr);
-+	devinfo->write_ptr(devinfo, ring->w_idx_addr, commonring->w_ptr);
- 
- 	return 0;
- }
-@@ -915,7 +947,7 @@ static int brcmf_pcie_ring_mb_update_rpt
- 	if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
- 		return -EIO;
- 
--	commonring->r_ptr = brcmf_pcie_read_tcm16(devinfo, ring->r_idx_addr);
-+	commonring->r_ptr = devinfo->read_ptr(devinfo, ring->r_idx_addr);
- 
- 	brcmf_dbg(PCIE, "R r_ptr %d (%d), ring %d\n", commonring->r_ptr,
- 		  commonring->w_ptr, ring->id);
-@@ -933,7 +965,7 @@ static int brcmf_pcie_ring_mb_update_wpt
- 	if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
- 		return -EIO;
- 
--	commonring->w_ptr = brcmf_pcie_read_tcm16(devinfo, ring->w_idx_addr);
-+	commonring->w_ptr = devinfo->read_ptr(devinfo, ring->w_idx_addr);
- 
- 	brcmf_dbg(PCIE, "R w_ptr %d (%d), ring %d\n", commonring->w_ptr,
- 		  commonring->r_ptr, ring->id);
-@@ -1038,6 +1070,13 @@ static void brcmf_pcie_release_ringbuffe
- 	}
- 	kfree(devinfo->shared.flowrings);
- 	devinfo->shared.flowrings = NULL;
-+	if (devinfo->idxbuf) {
-+		dma_free_coherent(&devinfo->pdev->dev,
-+				  devinfo->idxbuf_sz,
-+				  devinfo->idxbuf,
-+				  devinfo->idxbuf_dmahandle);
-+		devinfo->idxbuf = NULL;
-+	}
- }
- 
- 
-@@ -1053,19 +1092,72 @@ static int brcmf_pcie_init_ringbuffers(s
- 	u32 addr;
- 	u32 ring_mem_ptr;
- 	u32 i;
-+	u64 address;
-+	u32 bufsz;
- 	u16 max_sub_queues;
-+	u8 idx_offset;
- 
- 	ring_addr = devinfo->shared.ring_info_addr;
- 	brcmf_dbg(PCIE, "Base ring addr = 0x%08x\n", ring_addr);
-+	addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
-+	max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
- 
--	addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
--	d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
--	addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
--	d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
--	addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
--	h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
--	addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
--	h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+	if (devinfo->dma_idx_sz != 0) {
-+		bufsz = (BRCMF_NROF_D2H_COMMON_MSGRINGS + max_sub_queues) *
-+			devinfo->dma_idx_sz * 2;
-+		devinfo->idxbuf = dma_alloc_coherent(&devinfo->pdev->dev, bufsz,
-+						     &devinfo->idxbuf_dmahandle,
-+						     GFP_KERNEL);
-+		if (!devinfo->idxbuf)
-+			devinfo->dma_idx_sz = 0;
-+	}
-+
-+	if (devinfo->dma_idx_sz == 0) {
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
-+		d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
-+		d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
-+		h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
-+		h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		idx_offset = sizeof(u32);
-+		devinfo->write_ptr = brcmf_pcie_write_tcm16;
-+		devinfo->read_ptr = brcmf_pcie_read_tcm16;
-+		brcmf_dbg(PCIE, "Using TCM indices\n");
-+	} else {
-+		memset(devinfo->idxbuf, 0, bufsz);
-+		devinfo->idxbuf_sz = bufsz;
-+		idx_offset = devinfo->dma_idx_sz;
-+		devinfo->write_ptr = brcmf_pcie_write_idx;
-+		devinfo->read_ptr = brcmf_pcie_read_idx;
-+
-+		h2d_w_idx_ptr = 0;
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET;
-+		address = (u64)devinfo->idxbuf_dmahandle;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+		h2d_r_idx_ptr = h2d_w_idx_ptr + max_sub_queues * idx_offset;
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET;
-+		address += max_sub_queues * idx_offset;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+		d2h_w_idx_ptr = h2d_r_idx_ptr + max_sub_queues * idx_offset;
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET;
-+		address += max_sub_queues * idx_offset;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+		d2h_r_idx_ptr = d2h_w_idx_ptr +
-+				BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET;
-+		address += BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+		brcmf_dbg(PCIE, "Using host memory indices\n");
-+	}
- 
- 	addr = ring_addr + BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET;
- 	ring_mem_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-@@ -1079,8 +1171,8 @@ static int brcmf_pcie_init_ringbuffers(s
- 		ring->id = i;
- 		devinfo->shared.commonrings[i] = ring;
- 
--		h2d_w_idx_ptr += sizeof(u32);
--		h2d_r_idx_ptr += sizeof(u32);
-+		h2d_w_idx_ptr += idx_offset;
-+		h2d_r_idx_ptr += idx_offset;
- 		ring_mem_ptr += BRCMF_RING_MEM_SZ;
- 	}
- 
-@@ -1094,13 +1186,11 @@ static int brcmf_pcie_init_ringbuffers(s
- 		ring->id = i;
- 		devinfo->shared.commonrings[i] = ring;
- 
--		d2h_w_idx_ptr += sizeof(u32);
--		d2h_r_idx_ptr += sizeof(u32);
-+		d2h_w_idx_ptr += idx_offset;
-+		d2h_r_idx_ptr += idx_offset;
- 		ring_mem_ptr += BRCMF_RING_MEM_SZ;
- 	}
- 
--	addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
--	max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
- 	devinfo->shared.nrof_flowrings =
- 			max_sub_queues - BRCMF_NROF_H2D_COMMON_MSGRINGS;
- 	rings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*ring),
-@@ -1124,15 +1214,15 @@ static int brcmf_pcie_init_ringbuffers(s
- 					     ring);
- 		ring->w_idx_addr = h2d_w_idx_ptr;
- 		ring->r_idx_addr = h2d_r_idx_ptr;
--		h2d_w_idx_ptr += sizeof(u32);
--		h2d_r_idx_ptr += sizeof(u32);
-+		h2d_w_idx_ptr += idx_offset;
-+		h2d_r_idx_ptr += idx_offset;
- 	}
- 	devinfo->shared.flowrings = rings;
- 
- 	return 0;
- 
- fail:
--	brcmf_err("Allocating commonring buffers failed\n");
-+	brcmf_err("Allocating ring buffers failed\n");
- 	brcmf_pcie_release_ringbuffers(devinfo);
- 	return -ENOMEM;
- }
-@@ -1269,6 +1359,14 @@ brcmf_pcie_init_share_ram_info(struct br
- 		return -EINVAL;
- 	}
- 
-+	/* check firmware support dma indicies */
-+	if (shared->flags & BRCMF_PCIE_SHARED_DMA_INDEX) {
-+		if (shared->flags & BRCMF_PCIE_SHARED_DMA_2B_IDX)
-+			devinfo->dma_idx_sz = sizeof(u16);
-+		else
-+			devinfo->dma_idx_sz = sizeof(u32);
-+	}
-+
- 	addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET;
- 	shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr);
- 	if (shared->max_rxbufpost == 0)
diff --git a/package/kernel/mac80211/patches/345-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch b/package/kernel/mac80211/patches/345-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch
deleted file mode 100644
index 28408d2b4f..0000000000
--- a/package/kernel/mac80211/patches/345-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 26 May 2015 13:19:46 +0200
-Subject: [PATCH] brcmfmac: avoid null pointer access when
- brcmf_msgbuf_get_pktid() fails
-
-The function brcmf_msgbuf_get_pktid() may return a NULL pointer so
-the callers should check the return pointer before accessing it to
-avoid the crash below (see [1]):
-
-brcmfmac: brcmf_msgbuf_get_pktid: Invalid packet id 273 (not in use)
-BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
-IP: [<ffffffff8145b225>] skb_pull+0x5/0x50
-PGD 0
-Oops: 0000 [#1] PREEMPT SMP
-Modules linked in: pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O)
- snd_hda_codec_hdmi bnep mousedev hid_generic ushwmon msr ext4 crc16 mbcache
- jbd2 sd_mod uas usb_storage ahci libahci libata scsi_mod xhci_pci xhci_hcd
- usbcore usb_common
-CPU: 0 PID: 1661 Comm: irq/61-brcmf_pc Tainted: G O    4.0.1-MacbookPro-ARCH #1
-Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6,
- BIOS MBP121.88Z.0167.B02.1503241251 03/24/2015
-task: ffff880264203cc0 ti: ffff88025ffe4000 task.ti: ffff88025ffe4000
-RIP: 0010:[<ffffffff8145b225>]  [<ffffffff8145b225>] skb_pull+0x5/0x50
-RSP: 0018:ffff88025ffe7d40  EFLAGS: 00010202
-RAX: 0000000000000000 RBX: ffff88008a33c000 RCX: 0000000000000044
-RDX: 0000000000000000 RSI: 000000000000004a RDI: 0000000000000000
-RBP: ffff88025ffe7da8 R08: 0000000000000096 R09: 000000000000004a
-R10: 0000000000000000 R11: 000000000000048e R12: ffff88025ff14f00
-R13: 0000000000000000 R14: ffff880263b48200 R15: ffff88008a33c000
-FS:  0000000000000000(0000) GS:ffff88026ec00000(0000) knlGS:0000000000000000
-CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
-CR2: 0000000000000080 CR3: 000000000180b000 CR4: 00000000003407f0
-Stack:
- ffffffffa06aed74 ffff88025ffe7dc8 ffff880263b48270 ffff880263b48278
- 05ea88020000004a 0002ffff81014635 000000001720b2f6 ffff88026ec116c0
- ffff880263b48200 0000000000010000 ffff880263b4ae00 ffff880264203cc0
-Call Trace:
- [<ffffffffa06aed74>] ? brcmf_msgbuf_process_rx+0x404/0x480 [brcmfmac]
- [<ffffffff810cea60>] ? irq_finalize_oneshot.part.30+0xf0/0xf0
- [<ffffffffa06afb55>] brcmf_proto_msgbuf_rx_trigger+0x35/0xf0 [brcmfmac]
- [<ffffffffa06baf2a>] brcmf_pcie_isr_thread_v2+0x8a/0x130 [brcmfmac]
- [<ffffffff810cea80>] irq_thread_fn+0x20/0x50
- [<ffffffff810ceddf>] irq_thread+0x13f/0x170
- [<ffffffff810cebf0>] ? wake_threads_waitq+0x30/0x30
- [<ffffffff810ceca0>] ? irq_thread_dtor+0xb0/0xb0
- [<ffffffff81092a08>] kthread+0xd8/0xf0
- [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0
- [<ffffffff8156d898>] ret_from_fork+0x58/0x90
- [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0
-Code: 01 83 e2 f7 88 50 01 48 83 c4 08 5b 5d f3 c3 0f 1f 80 00 00 00 00 83 e2
- f7 88 50 01 c3 66 0f 1f 84 00 00 00 00 00 0f 1f
-RIP  [<ffffffff8145b225>] skb_pull+0x5/0x50
- RSP <ffff88025ffe7d40>
-CR2: 0000000000000080
----[ end trace b074c0f90e7c997d ]---
-
-[1] http://mid.gmane.org/20150430193259.GA5630@googlemail.com
-
-Cc: <stable@vger.kernel.org> # v3.18, v3.19, v4.0, v4.1
-Reported-by: Michael Hornung <mhornung.linux@gmail.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -500,11 +500,9 @@ static int brcmf_msgbuf_query_dcmd(struc
- 				     msgbuf->rx_pktids,
- 				     msgbuf->ioctl_resp_pktid);
- 	if (msgbuf->ioctl_resp_ret_len != 0) {
--		if (!skb) {
--			brcmf_err("Invalid packet id idx recv'd %d\n",
--				  msgbuf->ioctl_resp_pktid);
-+		if (!skb)
- 			return -EBADF;
--		}
-+
- 		memcpy(buf, skb->data, (len < msgbuf->ioctl_resp_ret_len) ?
- 				       len : msgbuf->ioctl_resp_ret_len);
- 	}
-@@ -866,10 +864,8 @@ brcmf_msgbuf_process_txstatus(struct brc
- 	flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
- 	skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
- 				     msgbuf->tx_pktids, idx);
--	if (!skb) {
--		brcmf_err("Invalid packet id idx recv'd %d\n", idx);
-+	if (!skb)
- 		return;
--	}
- 
- 	set_bit(flowid, msgbuf->txstatus_done_map);
- 	commonring = msgbuf->flowrings[flowid];
-@@ -1148,6 +1144,8 @@ brcmf_msgbuf_process_rx_complete(struct
- 
- 	skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
- 				     msgbuf->rx_pktids, idx);
-+	if (!skb)
-+		return;
- 
- 	if (data_offset)
- 		skb_pull(skb, data_offset);
diff --git a/package/kernel/mac80211/patches/346-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch b/package/kernel/mac80211/patches/346-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch
deleted file mode 100644
index f0230347ef..0000000000
--- a/package/kernel/mac80211/patches/346-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 27 May 2015 19:31:41 +0200
-Subject: [PATCH] brcmfmac: fix invalid access to struct acpi_device fields
-
-The fields of struct acpi_device are only known when CONFIG_ACPI is
-defined. Fix this by using a helper function. This will resolve the
-issue found in linux-next:
-
- ../brcmfmac/bcmsdh.c: In function 'brcmf_ops_sdio_probe':
- ../brcmfmac/bcmsdh.c:1139:7: error: dereferencing pointer to incomplete type
-   adev->flags.power_manageable = 0;
-       ^
-
-Fixes: f0992ace680c ("brcmfmac: prohibit ACPI power management ...")
-Cc: Fu, Zhonghui <zhonghui.fu@linux.intel.com>
-Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1117,6 +1117,18 @@ MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_id
- static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
- 
- 
-+static void brcmf_sdiod_acpi_set_power_manageable(struct device *dev,
-+						  int val)
-+{
-+#if IS_ENABLED(CONFIG_ACPI)
-+	struct acpi_device *adev;
-+
-+	adev = ACPI_COMPANION(dev);
-+	if (adev)
-+		adev->flags.power_manageable = 0;
-+#endif
-+}
-+
- static int brcmf_ops_sdio_probe(struct sdio_func *func,
- 				const struct sdio_device_id *id)
- {
-@@ -1124,7 +1136,6 @@ static int brcmf_ops_sdio_probe(struct s
- 	struct brcmf_sdio_dev *sdiodev;
- 	struct brcmf_bus *bus_if;
- 	struct device *dev;
--	struct acpi_device *adev;
- 
- 	brcmf_dbg(SDIO, "Enter\n");
- 	brcmf_dbg(SDIO, "Class=%x\n", func->class);
-@@ -1132,11 +1143,9 @@ static int brcmf_ops_sdio_probe(struct s
- 	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- 	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
- 
--	/* prohibit ACPI power management for this device */
- 	dev = &func->dev;
--	adev = ACPI_COMPANION(dev);
--	if (adev)
--		adev->flags.power_manageable = 0;
-+	/* prohibit ACPI power management for this device */
-+	brcmf_sdiod_acpi_set_power_manageable(dev, 0);
- 
- 	/* Consume func num 1 but dont do anything with it. */
- 	if (func->num == 1)
diff --git a/package/kernel/mac80211/patches/347-brcmfmac-simplify-check-stripping-v2-NVRAM.patch b/package/kernel/mac80211/patches/347-brcmfmac-simplify-check-stripping-v2-NVRAM.patch
deleted file mode 100644
index 2bfd44f998..0000000000
--- a/package/kernel/mac80211/patches/347-brcmfmac-simplify-check-stripping-v2-NVRAM.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 09:34:21 +0200
-Subject: [PATCH] brcmfmac: simplify check stripping v2 NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Comparing NVRAM entry with a full filtering string is simpler than
-comparing it with a short prefix and then checking random chars at magic
-offsets. The cost of snprintf relatively low, we execute it just once.
-Tested on BCM43602 with NVRAM hacked to use V2 format.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -25,7 +25,7 @@
- 
- #define BRCMF_FW_MAX_NVRAM_SIZE			64000
- #define BRCMF_FW_NVRAM_DEVPATH_LEN		19	/* devpath0=pcie/1/4/ */
--#define BRCMF_FW_NVRAM_PCIEDEV_LEN		9	/* pcie/1/4/ */
-+#define BRCMF_FW_NVRAM_PCIEDEV_LEN		10	/* pcie/1/4/ + \0 */
- 
- char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
- module_param_string(firmware_path, brcmf_firmware_path,
-@@ -297,6 +297,8 @@ fail:
- static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr,
- 				    u16 bus_nr)
- {
-+	char prefix[BRCMF_FW_NVRAM_PCIEDEV_LEN];
-+	size_t len;
- 	u32 i, j;
- 	u8 *nvram;
- 
-@@ -308,14 +310,13 @@ static void brcmf_fw_strip_multi_v2(stru
- 	 * Valid entries are of type pcie/X/Y/ where X = domain_nr and
- 	 * Y = bus_nr.
- 	 */
-+	snprintf(prefix, sizeof(prefix), "pcie/%d/%d/", domain_nr, bus_nr);
-+	len = strlen(prefix);
- 	i = 0;
- 	j = 0;
--	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) {
--		if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) &&
--		    (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') &&
--		    ((nvp->nvram[i + 5] - '0') == domain_nr) &&
--		    ((nvp->nvram[i + 7] - '0') == bus_nr)) {
--			i += BRCMF_FW_NVRAM_PCIEDEV_LEN;
-+	while (i < nvp->nvram_len - len) {
-+		if (strncmp(&nvp->nvram[i], prefix, len) == 0) {
-+			i += len;
- 			while (nvp->nvram[i] != 0) {
- 				nvram[j] = nvp->nvram[i];
- 				i++;
diff --git a/package/kernel/mac80211/patches/348-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch b/package/kernel/mac80211/patches/348-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch
deleted file mode 100644
index 0e65114f86..0000000000
--- a/package/kernel/mac80211/patches/348-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 11:01:08 +0200
-Subject: [PATCH] brcmfmac: simplify check finding NVRAM v1 device path
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With a simple use of snprintf and small buffer we can compare NVRAM
-entry value with a full string. This way we avoid checking random chars
-at magic offsets.
-Tested on BCM43602 with NVRAM hacked to use v1 format.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -222,6 +222,10 @@ static int brcmf_init_nvram_parser(struc
- static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr,
- 				    u16 bus_nr)
- {
-+	/* Device path with a leading '=' key-value separator */
-+	char pcie_path[] = "=pcie/?/?";
-+	size_t pcie_len;
-+
- 	u32 i, j;
- 	bool found;
- 	u8 *nvram;
-@@ -238,6 +242,9 @@ static void brcmf_fw_strip_multi_v1(stru
- 	/* First search for the devpathX and see if it is the configuration
- 	 * for domain_nr/bus_nr. Search complete nvp
- 	 */
-+	snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr,
-+		 bus_nr);
-+	pcie_len = strlen(pcie_path);
- 	found = false;
- 	i = 0;
- 	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) {
-@@ -245,13 +252,10 @@ static void brcmf_fw_strip_multi_v1(stru
- 		 * Y = domain_nr, Z = bus_nr, X = virtual ID
- 		 */
- 		if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
--		    (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) {
--			if (((nvp->nvram[i + 14] - '0') == domain_nr) &&
--			    ((nvp->nvram[i + 16] - '0') == bus_nr)) {
--				id = nvp->nvram[i + 7] - '0';
--				found = true;
--				break;
--			}
-+		    (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) {
-+			id = nvp->nvram[i + 7] - '0';
-+			found = true;
-+			break;
- 		}
- 		while (nvp->nvram[i] != 0)
- 			i++;
diff --git a/package/kernel/mac80211/patches/349-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch b/package/kernel/mac80211/patches/349-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch
deleted file mode 100644
index dc174e5a3d..0000000000
--- a/package/kernel/mac80211/patches/349-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 13:59:54 +0200
-Subject: [PATCH] brcmfmac: treat \0 as end of comment when parsing NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes brcmfmac dealing with NVRAM coming from platform e.g. from a
-flash MTD partition. In such cases entries are separated by \0 instead
-of \n which caused ignoring whole content after the first "comment".
-While platform NVRAM doesn't usually contain comments, we switch to
-COMMENT state after e.g. finding an unexpected char in key name.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -162,17 +162,20 @@ brcmf_nvram_handle_value(struct nvram_pa
- static enum nvram_parser_state
- brcmf_nvram_handle_comment(struct nvram_parser *nvp)
- {
--	char *eol, *sol;
-+	char *eoc, *sol;
- 
- 	sol = (char *)&nvp->fwnv->data[nvp->pos];
--	eol = strchr(sol, '\n');
--	if (eol == NULL)
--		return END;
-+	eoc = strchr(sol, '\n');
-+	if (!eoc) {
-+		eoc = strchr(sol, '\0');
-+		if (!eoc)
-+			return END;
-+	}
- 
- 	/* eat all moving to next line */
- 	nvp->line++;
- 	nvp->column = 1;
--	nvp->pos += (eol - sol) + 1;
-+	nvp->pos += (eoc - sol) + 1;
- 	return IDLE;
- }
- 
diff --git a/package/kernel/mac80211/patches/350-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch b/package/kernel/mac80211/patches/350-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch
deleted file mode 100644
index 5700142646..0000000000
--- a/package/kernel/mac80211/patches/350-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 23 May 2015 09:15:33 +0200
-Subject: [PATCH] brcmfmac: allow NVRAM values to contain spaces
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Platform NVRAMs often contain values with spaces. Even if right now most
-firmware-supported entries are simple values, we shouldn't reject these
-with spaces. It was semi-confirmed by Broadcom in the early patch adding
-support for platform NVRAMs.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -66,6 +66,12 @@ struct nvram_parser {
- 	bool multi_dev_v2;
- };
- 
-+/**
-+ * is_nvram_char() - check if char is a valid one for NVRAM entry
-+ *
-+ * It accepts all printable ASCII chars except for '#' which opens a comment.
-+ * Please note that ' ' (space) while accepted is not a valid key name char.
-+ */
- static bool is_nvram_char(char c)
- {
- 	/* comment marker excluded */
-@@ -73,7 +79,7 @@ static bool is_nvram_char(char c)
- 		return false;
- 
- 	/* key and value may have any other readable character */
--	return (c > 0x20 && c < 0x7f);
-+	return (c >= 0x20 && c < 0x7f);
- }
- 
- static bool is_whitespace(char c)
-@@ -120,7 +126,7 @@ static enum nvram_parser_state brcmf_nvr
- 			nvp->multi_dev_v1 = true;
- 		if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
- 			nvp->multi_dev_v2 = true;
--	} else if (!is_nvram_char(c)) {
-+	} else if (!is_nvram_char(c) || c == ' ') {
- 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
- 			  nvp->line, nvp->column);
- 		return COMMENT;
diff --git a/package/kernel/mac80211/patches/351-ath9k-fix-DMA-stop-sequence-for-AR9003.patch b/package/kernel/mac80211/patches/351-ath9k-fix-DMA-stop-sequence-for-AR9003.patch
deleted file mode 100644
index 814b0d7a4a..0000000000
--- a/package/kernel/mac80211/patches/351-ath9k-fix-DMA-stop-sequence-for-AR9003.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Tue, 2 Jun 2015 10:35:46 +0200
-Subject: [PATCH] ath9k: fix DMA stop sequence for AR9003+
-
-AR93xx and newer needs to stop rx before tx to avoid getting the DMA
-engine or MAC into a stuck state.
-This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -216,11 +216,13 @@ static bool ath_prepare_reset(struct ath
- 	ath_stop_ani(sc);
- 	ath9k_hw_disable_interrupts(ah);
- 
--	if (!ath_drain_all_txq(sc))
--		ret = false;
--
--	if (!ath_stoprecv(sc))
--		ret = false;
-+	if (AR_SREV_9300_20_OR_LATER(ah)) {
-+		ret &= ath_stoprecv(sc);
-+		ret &= ath_drain_all_txq(sc);
-+	} else {
-+		ret &= ath_drain_all_txq(sc);
-+		ret &= ath_stoprecv(sc);
-+	}
- 
- 	return ret;
- }
diff --git a/package/kernel/mac80211/patches/352-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch b/package/kernel/mac80211/patches/352-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch
deleted file mode 100644
index 7bbd57e15e..0000000000
--- a/package/kernel/mac80211/patches/352-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 28 May 2015 14:19:21 +0200
-Subject: [PATCH] brcmfmac: support NVRAMs containing pci devpaths (instead of
- pcie)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Recently Broadcom added support for NVRAMs with entries for multiple
-PCIe devices. One of the supported formats is based on prefixes defined
-like: devpath0=pcie/1/4/ and entries like 0:foo=bar 0:baz=qux etc.
-
-Unfortunately there are also a bit older devices using different way of
-defining prefixes, e.g. SmartRG SR400ac (2 x BCM43602) with entries:
-devpath0=pci/1/1/
-devpath1=pci/2/1
-Broadcom stated this old format will never be used/supported by brcmfmac
-but given the simplicity of this patch I'll insist on supporting it.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -232,6 +232,8 @@ static void brcmf_fw_strip_multi_v1(stru
- 				    u16 bus_nr)
- {
- 	/* Device path with a leading '=' key-value separator */
-+	char pci_path[] = "=pci/?/?";
-+	size_t pci_len;
- 	char pcie_path[] = "=pcie/?/?";
- 	size_t pcie_len;
- 
-@@ -251,6 +253,9 @@ static void brcmf_fw_strip_multi_v1(stru
- 	/* First search for the devpathX and see if it is the configuration
- 	 * for domain_nr/bus_nr. Search complete nvp
- 	 */
-+	snprintf(pci_path, sizeof(pci_path), "=pci/%d/%d", domain_nr,
-+		 bus_nr);
-+	pci_len = strlen(pci_path);
- 	snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr,
- 		 bus_nr);
- 	pcie_len = strlen(pcie_path);
-@@ -260,8 +265,9 @@ static void brcmf_fw_strip_multi_v1(stru
- 		/* Format: devpathX=pcie/Y/Z/
- 		 * Y = domain_nr, Z = bus_nr, X = virtual ID
- 		 */
--		if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
--		    (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) {
-+		if (strncmp(&nvp->nvram[i], "devpath", 7) == 0 &&
-+		    (!strncmp(&nvp->nvram[i + 8], pci_path, pci_len) ||
-+		     !strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len))) {
- 			id = nvp->nvram[i + 7] - '0';
- 			found = true;
- 			break;
diff --git a/package/kernel/mac80211/patches/353-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch b/package/kernel/mac80211/patches/353-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch
deleted file mode 100644
index 1eff6ed83a..0000000000
--- a/package/kernel/mac80211/patches/353-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 31 May 2015 02:52:26 +0200
-Subject: [PATCH] brcmfmac: set wiphy perm_addr to hardware MAC address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows e.g. user space to use /sys/class/ieee80211/*/macaddress
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6070,6 +6070,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- 		brcmf_err("Could not allocate wiphy device\n");
- 		return NULL;
- 	}
-+	memcpy(wiphy->perm_addr, drvr->mac, ETH_ALEN);
- 	set_wiphy_dev(wiphy, busdev);
- 
- 	cfg = wiphy_priv(wiphy);
diff --git a/package/kernel/mac80211/patches/354-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch b/package/kernel/mac80211/patches/354-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch
deleted file mode 100644
index c6e83ddd29..0000000000
--- a/package/kernel/mac80211/patches/354-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Jun 2015 22:11:07 +0200
-Subject: [PATCH] brcmfmac: use direct data pointer in NVRAM parser struct
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-As we plan to add support for platform NVRAM we should store direct
-data pointer without the extra struct firmware layer. This will allow
-us to support other sources with the only requirement being u8 buffer.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -43,7 +43,7 @@ enum nvram_parser_state {
-  * struct nvram_parser - internal info for parser.
-  *
-  * @state: current parser state.
-- * @fwnv: input buffer being parsed.
-+ * @data: input buffer being parsed.
-  * @nvram: output buffer with parse result.
-  * @nvram_len: lenght of parse result.
-  * @line: current line.
-@@ -55,7 +55,7 @@ enum nvram_parser_state {
-  */
- struct nvram_parser {
- 	enum nvram_parser_state state;
--	const struct firmware *fwnv;
-+	const u8 *data;
- 	u8 *nvram;
- 	u32 nvram_len;
- 	u32 line;
-@@ -91,7 +91,7 @@ static enum nvram_parser_state brcmf_nvr
- {
- 	char c;
- 
--	c = nvp->fwnv->data[nvp->pos];
-+	c = nvp->data[nvp->pos];
- 	if (c == '\n')
- 		return COMMENT;
- 	if (is_whitespace(c))
-@@ -115,16 +115,16 @@ static enum nvram_parser_state brcmf_nvr
- 	enum nvram_parser_state st = nvp->state;
- 	char c;
- 
--	c = nvp->fwnv->data[nvp->pos];
-+	c = nvp->data[nvp->pos];
- 	if (c == '=') {
- 		/* ignore RAW1 by treating as comment */
--		if (strncmp(&nvp->fwnv->data[nvp->entry], "RAW1", 4) == 0)
-+		if (strncmp(&nvp->data[nvp->entry], "RAW1", 4) == 0)
- 			st = COMMENT;
- 		else
- 			st = VALUE;
--		if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0)
-+		if (strncmp(&nvp->data[nvp->entry], "devpath", 7) == 0)
- 			nvp->multi_dev_v1 = true;
--		if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
-+		if (strncmp(&nvp->data[nvp->entry], "pcie/", 5) == 0)
- 			nvp->multi_dev_v2 = true;
- 	} else if (!is_nvram_char(c) || c == ' ') {
- 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
-@@ -145,11 +145,11 @@ brcmf_nvram_handle_value(struct nvram_pa
- 	char *ekv;
- 	u32 cplen;
- 
--	c = nvp->fwnv->data[nvp->pos];
-+	c = nvp->data[nvp->pos];
- 	if (!is_nvram_char(c)) {
- 		/* key,value pair complete */
--		ekv = (u8 *)&nvp->fwnv->data[nvp->pos];
--		skv = (u8 *)&nvp->fwnv->data[nvp->entry];
-+		ekv = (u8 *)&nvp->data[nvp->pos];
-+		skv = (u8 *)&nvp->data[nvp->entry];
- 		cplen = ekv - skv;
- 		if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE)
- 			return END;
-@@ -170,7 +170,7 @@ brcmf_nvram_handle_comment(struct nvram_
- {
- 	char *eoc, *sol;
- 
--	sol = (char *)&nvp->fwnv->data[nvp->pos];
-+	sol = (char *)&nvp->data[nvp->pos];
- 	eoc = strchr(sol, '\n');
- 	if (!eoc) {
- 		eoc = strchr(sol, '\0');
-@@ -201,17 +201,17 @@ static enum nvram_parser_state
- };
- 
- static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
--				   const struct firmware *nv)
-+				   const u8 *data, size_t data_len)
- {
- 	size_t size;
- 
- 	memset(nvp, 0, sizeof(*nvp));
--	nvp->fwnv = nv;
-+	nvp->data = data;
- 	/* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */
--	if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE)
-+	if (data_len > BRCMF_FW_MAX_NVRAM_SIZE)
- 		size = BRCMF_FW_MAX_NVRAM_SIZE;
- 	else
--		size = nv->size;
-+		size = data_len;
- 	/* Alloc for extra 0 byte + roundup by 4 + length field */
- 	size += 1 + 3 + sizeof(u32);
- 	nvp->nvram = kzalloc(size, GFP_KERNEL);
-@@ -362,18 +362,18 @@ fail:
-  * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
-  * End of buffer is completed with token identifying length of buffer.
-  */
--static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length,
--				  u16 domain_nr, u16 bus_nr)
-+static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len,
-+				  u32 *new_length, u16 domain_nr, u16 bus_nr)
- {
- 	struct nvram_parser nvp;
- 	u32 pad;
- 	u32 token;
- 	__le32 token_le;
- 
--	if (brcmf_init_nvram_parser(&nvp, nv) < 0)
-+	if (brcmf_init_nvram_parser(&nvp, data, data_len) < 0)
- 		return NULL;
- 
--	while (nvp.pos < nv->size) {
-+	while (nvp.pos < data_len) {
- 		nvp.state = nv_parser_states[nvp.state](&nvp);
- 		if (nvp.state == END)
- 			break;
-@@ -432,7 +432,7 @@ static void brcmf_fw_request_nvram_done(
- 		goto fail;
- 
- 	if (fw) {
--		nvram = brcmf_fw_nvram_strip(fw, &nvram_length,
-+		nvram = brcmf_fw_nvram_strip(fw->data, fw->size, &nvram_length,
- 					     fwctx->domain_nr, fwctx->bus_nr);
- 		release_firmware(fw);
- 		if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
diff --git a/package/kernel/mac80211/patches/355-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch b/package/kernel/mac80211/patches/355-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch
deleted file mode 100644
index 4ecef3b5af..0000000000
--- a/package/kernel/mac80211/patches/355-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 6 Jun 2015 22:45:59 +0200
-Subject: [PATCH] b43: fix support for 14e4:4321 PCI dev with BCM4321 chipset
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems Broadcom released two devices with conflicting device id. There
-are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they
-can be found in routers, e.g. Netgear WNR834Bv2. However, according to
-Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY).
-It's unsure if they meant PCI device id, or "virtual" id (from SPROM).
-To distinguish these devices lets check PHY type (G vs. N).
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Cc: <stable@vger.kernel.org> # 3.16+
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -5365,6 +5365,10 @@ static void b43_supported_bands(struct b
- 		*have_5ghz_phy = true;
- 		return;
- 	case 0x4321: /* BCM4306 */
-+		/* There are 14e4:4321 PCI devs with 2.4 GHz BCM4321 (N-PHY) */
-+		if (dev->phy.type != B43_PHYTYPE_G)
-+			break;
-+		/* fall through */
- 	case 0x4313: /* BCM4311 */
- 	case 0x431a: /* BCM4318 */
- 	case 0x432a: /* BCM4321 */
diff --git a/package/kernel/mac80211/patches/357-0001-brcmfmac-Update-msgbuf-read-pointer-quicker.patch b/package/kernel/mac80211/patches/357-0001-brcmfmac-Update-msgbuf-read-pointer-quicker.patch
deleted file mode 100644
index 74df9f93f7..0000000000
--- a/package/kernel/mac80211/patches/357-0001-brcmfmac-Update-msgbuf-read-pointer-quicker.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:32 +0200
-Subject: [PATCH] brcmfmac: Update msgbuf read pointer quicker.
-
-On device to host data using msgbuf the read pointer gets updated
-once all data is processed. Updating this pointer more frequently
-allows the firmware to add more data quicker. This will result in
-slightly higher and more stable throughput on CPU bounded host
-processors.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-@@ -223,8 +223,6 @@ void brcmf_commonring_write_cancel(struc
- void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring,
- 				    u16 *n_items)
- {
--	void *ret_addr;
--
- 	if (commonring->cr_update_wptr)
- 		commonring->cr_update_wptr(commonring->cr_ctx);
- 
-@@ -235,19 +233,18 @@ void *brcmf_commonring_get_read_ptr(stru
- 	if (*n_items == 0)
- 		return NULL;
- 
--	ret_addr = commonring->buf_addr +
--		   (commonring->r_ptr * commonring->item_len);
--
--	commonring->r_ptr += *n_items;
--	if (commonring->r_ptr == commonring->depth)
--		commonring->r_ptr = 0;
--
--	return ret_addr;
-+	return commonring->buf_addr +
-+	       (commonring->r_ptr * commonring->item_len);
- }
- 
- 
--int brcmf_commonring_read_complete(struct brcmf_commonring *commonring)
-+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring,
-+				   u16 n_items)
- {
-+	commonring->r_ptr += n_items;
-+	if (commonring->r_ptr == commonring->depth)
-+		commonring->r_ptr = 0;
-+
- 	if (commonring->cr_write_rptr)
- 		return commonring->cr_write_rptr(commonring->cr_ctx);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
-@@ -62,7 +62,8 @@ void brcmf_commonring_write_cancel(struc
- 				   u16 n_items);
- void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring,
- 				    u16 *n_items);
--int brcmf_commonring_read_complete(struct brcmf_commonring *commonring);
-+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring,
-+				   u16 n_items);
- 
- #define brcmf_commonring_n_items(commonring) (commonring->depth)
- #define brcmf_commonring_len_item(commonring) (commonring->item_len)
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -75,6 +75,8 @@
- 
- #define BRCMF_MSGBUF_DELAY_TXWORKER_THRS	96
- #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS	32
-+#define BRCMF_MSGBUF_UPDATE_RX_PTR_THRS		48
-+
- 
- struct msgbuf_common_hdr {
- 	u8				msgtype;
-@@ -1257,19 +1259,27 @@ static void brcmf_msgbuf_process_rx(stru
- {
- 	void *buf;
- 	u16 count;
-+	u16 processed;
- 
- again:
- 	buf = brcmf_commonring_get_read_ptr(commonring, &count);
- 	if (buf == NULL)
- 		return;
- 
-+	processed = 0;
- 	while (count) {
- 		brcmf_msgbuf_process_msgtype(msgbuf,
- 					     buf + msgbuf->rx_dataoffset);
- 		buf += brcmf_commonring_len_item(commonring);
-+		processed++;
-+		if (processed == BRCMF_MSGBUF_UPDATE_RX_PTR_THRS) {
-+			brcmf_commonring_read_complete(commonring, processed);
-+			processed = 0;
-+		}
- 		count--;
- 	}
--	brcmf_commonring_read_complete(commonring);
-+	if (processed)
-+		brcmf_commonring_read_complete(commonring, processed);
- 
- 	if (commonring->r_ptr == 0)
- 		goto again;
diff --git a/package/kernel/mac80211/patches/357-0002-brcmfmac-remove-chipinfo-debugfs-entry.patch b/package/kernel/mac80211/patches/357-0002-brcmfmac-remove-chipinfo-debugfs-entry.patch
deleted file mode 100644
index 9e5b48608d..0000000000
--- a/package/kernel/mac80211/patches/357-0002-brcmfmac-remove-chipinfo-debugfs-entry.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:33 +0200
-Subject: [PATCH] brcmfmac: remove chipinfo debugfs entry
-
-The information provided by chipinfo is also provided by the
-revinfo debugfs entry. Removing it from debugfs.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -41,15 +41,6 @@ void brcmf_debugfs_exit(void)
- 	root_folder = NULL;
- }
- 
--static int brcmf_debugfs_chipinfo_read(struct seq_file *seq, void *data)
--{
--	struct brcmf_bus *bus = dev_get_drvdata(seq->private);
--
--	seq_printf(seq, "chip: %x(%u) rev %u\n",
--		   bus->chip, bus->chip, bus->chiprev);
--	return 0;
--}
--
- int brcmf_debugfs_attach(struct brcmf_pub *drvr)
- {
- 	struct device *dev = drvr->bus_if->dev;
-@@ -58,7 +49,6 @@ int brcmf_debugfs_attach(struct brcmf_pu
- 		return -ENODEV;
- 
- 	drvr->dbgfs_dir = debugfs_create_dir(dev_name(dev), root_folder);
--	brcmf_debugfs_add_entry(drvr, "chipinfo", brcmf_debugfs_chipinfo_read);
- 
- 	return PTR_ERR_OR_ZERO(drvr->dbgfs_dir);
- }
diff --git a/package/kernel/mac80211/patches/357-0003-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch b/package/kernel/mac80211/patches/357-0003-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch
deleted file mode 100644
index c38b2cd150..0000000000
--- a/package/kernel/mac80211/patches/357-0003-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:34 +0200
-Subject: [PATCH] brcmfmac: remove watchdog reset from
- brcmf_pcie_buscoreprep()
-
-The watchdog reset as done in brcmf_pcie_buscoreprep() is not
-sufficient. It needs to modify PCIe core registers as well
-which is properly done by brcmf_pcie_reset_device() after the
-chip recognition is done. So the faulty watchdog reset can be
-removed as it was causing driver reload to fail and hang the
-system requiring a power-cycle. Instead the call to to the
-brcmf_pcie_reset_device() function is done twice in the unload.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1629,20 +1629,7 @@ static void brcmf_pcie_buscore_write32(v
- 
- static int brcmf_pcie_buscoreprep(void *ctx)
- {
--	struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
--	int err;
--
--	err = brcmf_pcie_get_resource(devinfo);
--	if (err == 0) {
--		/* Set CC watchdog to reset all the cores on the chip to bring
--		 * back dongle to a sane state.
--		 */
--		brcmf_pcie_buscore_write32(ctx, CORE_CC_REG(SI_ENUM_BASE,
--							    watchdog), 4);
--		msleep(100);
--	}
--
--	return err;
-+	return brcmf_pcie_get_resource(ctx);
- }
- 
- 
-@@ -1824,6 +1811,7 @@ brcmf_pcie_remove(struct pci_dev *pdev)
- 		brcmf_pcie_intr_disable(devinfo);
- 
- 	brcmf_detach(&pdev->dev);
-+	brcmf_pcie_reset_device(devinfo);
- 
- 	kfree(bus->bus_priv.pcie);
- 	kfree(bus->msgbuf->flowrings);
diff --git a/package/kernel/mac80211/patches/357-0004-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch b/package/kernel/mac80211/patches/357-0004-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch
deleted file mode 100644
index 756fbb2cb7..0000000000
--- a/package/kernel/mac80211/patches/357-0004-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:35 +0200
-Subject: [PATCH] brcmfmac: use debugfs_create_devm_seqfile() helper
- function
-
-Some time ago the function debugfs_create_devm_seqfile() was
-introduced in debugfs. The caller simply needs to provide a
-device pointer and read function. The function brcmf_debugfs_add_entry()
-is now simply a wrapper only doing the work for CONFIG_BRCMDBG.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -64,44 +64,12 @@ struct dentry *brcmf_debugfs_get_devdir(
- 	return drvr->dbgfs_dir;
- }
- 
--struct brcmf_debugfs_entry {
--	int (*read)(struct seq_file *seq, void *data);
--	struct brcmf_pub *drvr;
--};
--
--static int brcmf_debugfs_entry_open(struct inode *inode, struct file *f)
--{
--	struct brcmf_debugfs_entry *entry = inode->i_private;
--
--	return single_open(f, entry->read, entry->drvr->bus_if->dev);
--}
--
--static const struct file_operations brcmf_debugfs_def_ops = {
--	.owner = THIS_MODULE,
--	.open = brcmf_debugfs_entry_open,
--	.release = single_release,
--	.read = seq_read,
--	.llseek = seq_lseek
--};
--
- int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn,
- 			    int (*read_fn)(struct seq_file *seq, void *data))
- {
--	struct dentry *dentry =  drvr->dbgfs_dir;
--	struct brcmf_debugfs_entry *entry;
--
--	if (IS_ERR_OR_NULL(dentry))
--		return -ENOENT;
--
--	entry = devm_kzalloc(drvr->bus_if->dev, sizeof(*entry), GFP_KERNEL);
--	if (!entry)
--		return -ENOMEM;
--
--	entry->read = read_fn;
--	entry->drvr = drvr;
--
--	dentry = debugfs_create_file(fn, S_IRUGO, dentry, entry,
--				     &brcmf_debugfs_def_ops);
-+	struct dentry *e;
- 
--	return PTR_ERR_OR_ZERO(dentry);
-+	e = debugfs_create_devm_seqfile(drvr->bus_if->dev, fn,
-+					drvr->dbgfs_dir, read_fn);
-+	return PTR_ERR_OR_ZERO(e);
- }
diff --git a/package/kernel/mac80211/patches/358-ath9k_hw-fix-device-ID-check-for-AR956x.patch b/package/kernel/mac80211/patches/358-ath9k_hw-fix-device-ID-check-for-AR956x.patch
deleted file mode 100644
index 2674efb91f..0000000000
--- a/package/kernel/mac80211/patches/358-ath9k_hw-fix-device-ID-check-for-AR956x.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 21 Jun 2015 19:45:59 +0200
-Subject: [PATCH] ath9k_hw: fix device ID check for AR956x
-
-Because of the missing return, the macVersion value was being
-overwritten with an invalid register read
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -278,6 +278,7 @@ static void ath9k_hw_read_revisions(stru
- 		return;
- 	case AR9300_DEVID_QCA956X:
- 		ah->hw_version.macVersion = AR_SREV_VERSION_9561;
-+		return;
- 	}
- 
- 	val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
diff --git a/package/kernel/mac80211/patches/359-0001-brcmfmac-Check-if-firmware-supports-p2p.patch b/package/kernel/mac80211/patches/359-0001-brcmfmac-Check-if-firmware-supports-p2p.patch
deleted file mode 100644
index ff24a4a06f..0000000000
--- a/package/kernel/mac80211/patches/359-0001-brcmfmac-Check-if-firmware-supports-p2p.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Pontus Fuchs <pontusf@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:17 +0200
-Subject: [PATCH] brcmfmac: Check if firmware supports p2p
-
-Add a feature flag to reflect the firmware's p2p capability.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -129,6 +129,7 @@ void brcmf_feat_attach(struct brcmf_pub
- 		brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
- 	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
- 		brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
-+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p");
- 
- 	/* set chip related quirks */
- 	switch (drvr->bus_if->chip) {
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -23,12 +23,14 @@
-  * MCHAN: multi-channel for concurrent P2P.
-  * PNO: preferred network offload.
-  * WOWL: Wake-On-WLAN.
-+ * P2P: peer-to-peer
-  */
- #define BRCMF_FEAT_LIST \
- 	BRCMF_FEAT_DEF(MBSS) \
- 	BRCMF_FEAT_DEF(MCHAN) \
- 	BRCMF_FEAT_DEF(PNO) \
--	BRCMF_FEAT_DEF(WOWL)
-+	BRCMF_FEAT_DEF(WOWL) \
-+	BRCMF_FEAT_DEF(P2P)
- /*
-  * Quirks:
-  *
diff --git a/package/kernel/mac80211/patches/359-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch b/package/kernel/mac80211/patches/359-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch
deleted file mode 100644
index 3876ba01da..0000000000
--- a/package/kernel/mac80211/patches/359-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From: Pontus Fuchs <pontusf@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:18 +0200
-Subject: [PATCH] brcmfmac: Build wiphy mode and interface combinations
- dynamically
-
-Switch from using semi hard coded interface combinations. This makes
-it easier to announce what the firmware actually supports. This fixes
-the case where brcmfmac announces p2p but the firmware doesn't
-support it.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -52,8 +52,6 @@
- #define BRCMF_PNO_SCAN_COMPLETE		1
- #define BRCMF_PNO_SCAN_INCOMPLETE	0
- 
--#define BRCMF_IFACE_MAX_CNT		3
--
- #define WPA_OUI				"\x00\x50\xF2"	/* WPA OUI */
- #define WPA_OUI_TYPE			1
- #define RSN_OUI				"\x00\x0F\xAC"	/* RSN OUI */
-@@ -5639,53 +5637,6 @@ static int brcmf_setup_wiphybands(struct
- 	return 0;
- }
- 
--static const struct ieee80211_iface_limit brcmf_iface_limits_mbss[] = {
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_STATION) |
--			 BIT(NL80211_IFTYPE_ADHOC)
--	},
--	{
--		.max = 4,
--		.types = BIT(NL80211_IFTYPE_AP)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
--			 BIT(NL80211_IFTYPE_P2P_GO)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_DEVICE)
--	}
--};
--
--static const struct ieee80211_iface_limit brcmf_iface_limits_sbss[] = {
--	{
--		.max = 2,
--		.types = BIT(NL80211_IFTYPE_STATION) |
--			 BIT(NL80211_IFTYPE_ADHOC) |
--			 BIT(NL80211_IFTYPE_AP)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
--			 BIT(NL80211_IFTYPE_P2P_GO)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_DEVICE)
--	}
--};
--static struct ieee80211_iface_combination brcmf_iface_combos[] = {
--	{
--		 .max_interfaces = BRCMF_IFACE_MAX_CNT,
--		 .num_different_channels = 1,
--		 .n_limits = ARRAY_SIZE(brcmf_iface_limits_sbss),
--		 .limits = brcmf_iface_limits_sbss,
--	}
--};
--
- static const struct ieee80211_txrx_stypes
- brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
- 	[NL80211_IFTYPE_STATION] = {
-@@ -5715,6 +5666,67 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] =
- 	}
- };
- 
-+static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
-+{
-+	struct ieee80211_iface_combination *combo = NULL;
-+	struct ieee80211_iface_limit *limits = NULL;
-+	int i = 0, max_iface_cnt;
-+
-+	combo = kzalloc(sizeof(*combo), GFP_KERNEL);
-+	if (!combo)
-+		goto err;
-+
-+	limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
-+	if (!limits)
-+		goto err;
-+
-+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-+				 BIT(NL80211_IFTYPE_ADHOC) |
-+				 BIT(NL80211_IFTYPE_AP);
-+
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
-+		combo->num_different_channels = 2;
-+	else
-+		combo->num_different_channels = 1;
-+
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
-+		limits[i].max = 1;
-+		limits[i++].types = BIT(NL80211_IFTYPE_STATION);
-+		limits[i].max = 4;
-+		limits[i++].types = BIT(NL80211_IFTYPE_AP);
-+		max_iface_cnt = 5;
-+	} else {
-+		limits[i].max = 2;
-+		limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
-+				    BIT(NL80211_IFTYPE_AP);
-+		max_iface_cnt = 2;
-+	}
-+
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
-+		wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+					  BIT(NL80211_IFTYPE_P2P_GO) |
-+					  BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		limits[i].max = 1;
-+		limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+				    BIT(NL80211_IFTYPE_P2P_GO);
-+		limits[i].max = 1;
-+		limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		max_iface_cnt += 2;
-+	}
-+	combo->max_interfaces = max_iface_cnt;
-+	combo->limits = limits;
-+	combo->n_limits = i;
-+
-+	wiphy->iface_combinations = combo;
-+	wiphy->n_iface_combinations = 1;
-+	return 0;
-+
-+err:
-+	kfree(limits);
-+	kfree(combo);
-+	return -ENOMEM;
-+}
-+
- static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
- {
- 	/* scheduled scan settings */
-@@ -5745,7 +5757,6 @@ static void brcmf_wiphy_wowl_params(stru
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- 	struct ieee80211_supported_band *band;
--	struct ieee80211_iface_combination ifc_combo;
- 	__le32 bandlist[3];
- 	u32 n_bands;
- 	int err, i;
-@@ -5753,24 +5764,11 @@ static int brcmf_setup_wiphy(struct wiph
- 	wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
- 	wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
- 	wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
--	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
--				 BIT(NL80211_IFTYPE_ADHOC) |
--				 BIT(NL80211_IFTYPE_AP) |
--				 BIT(NL80211_IFTYPE_P2P_CLIENT) |
--				 BIT(NL80211_IFTYPE_P2P_GO) |
--				 BIT(NL80211_IFTYPE_P2P_DEVICE);
--	/* need VSDB firmware feature for concurrent channels */
--	ifc_combo = brcmf_iface_combos[0];
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
--		ifc_combo.num_different_channels = 2;
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
--		ifc_combo.n_limits = ARRAY_SIZE(brcmf_iface_limits_mbss),
--		ifc_combo.limits = brcmf_iface_limits_mbss;
--	}
--	wiphy->iface_combinations = kmemdup(&ifc_combo,
--					    sizeof(ifc_combo),
--					    GFP_KERNEL);
--	wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos);
-+
-+	err = brcmf_setup_ifmodes(wiphy, ifp);
-+	if (err)
-+		return err;
-+
- 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
- 	wiphy->cipher_suites = __wl_cipher_suites;
- 	wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites);
-@@ -6035,6 +6033,8 @@ static void brcmf_free_wiphy(struct wiph
- 	if (!wiphy)
- 		return;
- 
-+	if (wiphy->iface_combinations)
-+		kfree(wiphy->iface_combinations->limits);
- 	kfree(wiphy->iface_combinations);
- 	if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- 		kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
diff --git a/package/kernel/mac80211/patches/359-0003-brcmfmac-rework-.get_station-callback.patch b/package/kernel/mac80211/patches/359-0003-brcmfmac-rework-.get_station-callback.patch
deleted file mode 100644
index 7bd06869da..0000000000
--- a/package/kernel/mac80211/patches/359-0003-brcmfmac-rework-.get_station-callback.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:19 +0200
-Subject: [PATCH] brcmfmac: rework .get_station() callback
-
-The .get_station() cfg80211 callback is used in several scenarios. In
-managed mode it can obtain information about the access-point and its
-BSS parameters. In managed mode it can also obtain information about
-TDLS peers. In AP mode it can obtain information about connected
-clients.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -2395,27 +2395,80 @@ brcmf_cfg80211_reconfigure_wep(struct br
- 		brcmf_err("set wsec error (%d)\n", err);
- }
- 
-+static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si)
-+{
-+	struct nl80211_sta_flag_update *sfu;
-+
-+	brcmf_dbg(TRACE, "flags %08x\n", fw_sta_flags);
-+	si->filled |= BIT(NL80211_STA_INFO_STA_FLAGS);
-+	sfu = &si->sta_flags;
-+	sfu->mask = BIT(NL80211_STA_FLAG_WME) |
-+		    BIT(NL80211_STA_FLAG_AUTHENTICATED) |
-+		    BIT(NL80211_STA_FLAG_ASSOCIATED) |
-+		    BIT(NL80211_STA_FLAG_AUTHORIZED);
-+	if (fw_sta_flags & BRCMF_STA_WME)
-+		sfu->set |= BIT(NL80211_STA_FLAG_WME);
-+	if (fw_sta_flags & BRCMF_STA_AUTHE)
-+		sfu->set |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
-+	if (fw_sta_flags & BRCMF_STA_ASSOC)
-+		sfu->set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
-+	if (fw_sta_flags & BRCMF_STA_AUTHO)
-+		sfu->set |= BIT(NL80211_STA_FLAG_AUTHORIZED);
-+}
-+
-+static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si)
-+{
-+	struct {
-+		__le32 len;
-+		struct brcmf_bss_info_le bss_le;
-+	} *buf;
-+	u16 capability;
-+	int err;
-+
-+	buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
-+	if (!buf)
-+		return;
-+
-+	buf->len = cpu_to_le32(WL_BSS_INFO_MAX);
-+	err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf,
-+				     WL_BSS_INFO_MAX);
-+	if (err) {
-+		brcmf_err("Failed to get bss info (%d)\n", err);
-+		return;
-+	}
-+	si->filled |= BIT(NL80211_STA_INFO_BSS_PARAM);
-+	si->bss_param.beacon_interval = le16_to_cpu(buf->bss_le.beacon_period);
-+	si->bss_param.dtim_period = buf->bss_le.dtim_period;
-+	capability = le16_to_cpu(buf->bss_le.capability);
-+	if (capability & IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT)
-+		si->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT;
-+	if (capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-+		si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
-+	if (capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-+		si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
-+}
-+
- static s32
- brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
- 			   const u8 *mac, struct station_info *sinfo)
- {
- 	struct brcmf_if *ifp = netdev_priv(ndev);
--	struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
--	struct brcmf_scb_val_le scb_val;
--	int rssi;
--	s32 rate;
- 	s32 err = 0;
--	u8 *bssid = profile->bssid;
- 	struct brcmf_sta_info_le sta_info_le;
--	u32 beacon_period;
--	u32 dtim_period;
-+	u32 sta_flags;
-+	u32 is_tdls_peer;
- 
- 	brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
- 	if (!check_vif_up(ifp->vif))
- 		return -EIO;
- 
--	if (brcmf_is_apmode(ifp->vif)) {
--		memcpy(&sta_info_le, mac, ETH_ALEN);
-+	memset(&sta_info_le, 0, sizeof(sta_info_le));
-+	memcpy(&sta_info_le, mac, ETH_ALEN);
-+	err = brcmf_fil_iovar_data_get(ifp, "tdls_sta_info",
-+				       &sta_info_le,
-+				       sizeof(sta_info_le));
-+	is_tdls_peer = !err;
-+	if (err) {
- 		err = brcmf_fil_iovar_data_get(ifp, "sta_info",
- 					       &sta_info_le,
- 					       sizeof(sta_info_le));
-@@ -2423,73 +2476,48 @@ brcmf_cfg80211_get_station(struct wiphy
- 			brcmf_err("GET STA INFO failed, %d\n", err);
- 			goto done;
- 		}
--		sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME);
--		sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000;
--		if (le32_to_cpu(sta_info_le.flags) & BRCMF_STA_ASSOC) {
--			sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME);
--			sinfo->connected_time = le32_to_cpu(sta_info_le.in);
--		}
--		brcmf_dbg(TRACE, "STA idle time : %d ms, connected time :%d sec\n",
--			  sinfo->inactive_time, sinfo->connected_time);
--	} else if (ifp->vif->wdev.iftype == NL80211_IFTYPE_STATION) {
--		if (memcmp(mac, bssid, ETH_ALEN)) {
--			brcmf_err("Wrong Mac address cfg_mac-%pM wl_bssid-%pM\n",
--				  mac, bssid);
--			err = -ENOENT;
--			goto done;
--		}
--		/* Report the current tx rate */
--		err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate);
--		if (err) {
--			brcmf_err("Could not get rate (%d)\n", err);
--			goto done;
--		} else {
-+	}
-+	brcmf_dbg(TRACE, "version %d\n", le16_to_cpu(sta_info_le.ver));
-+	sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME);
-+	sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000;
-+	sta_flags = le32_to_cpu(sta_info_le.flags);
-+	brcmf_convert_sta_flags(sta_flags, sinfo);
-+	sinfo->sta_flags.mask |= BIT(NL80211_STA_FLAG_TDLS_PEER);
-+	if (is_tdls_peer)
-+		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
-+	else
-+		sinfo->sta_flags.set &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
-+	if (sta_flags & BRCMF_STA_ASSOC) {
-+		sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME);
-+		sinfo->connected_time = le32_to_cpu(sta_info_le.in);
-+		brcmf_fill_bss_param(ifp, sinfo);
-+	}
-+	if (sta_flags & BRCMF_STA_SCBSTATS) {
-+		sinfo->filled |= BIT(NL80211_STA_INFO_TX_FAILED);
-+		sinfo->tx_failed = le32_to_cpu(sta_info_le.tx_failures);
-+		sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS);
-+		sinfo->tx_packets = le32_to_cpu(sta_info_le.tx_pkts);
-+		sinfo->tx_packets += le32_to_cpu(sta_info_le.tx_mcast_pkts);
-+		sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS);
-+		sinfo->rx_packets = le32_to_cpu(sta_info_le.rx_ucast_pkts);
-+		sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts);
-+		if (sinfo->tx_packets) {
- 			sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
--			sinfo->txrate.legacy = rate * 5;
--			brcmf_dbg(CONN, "Rate %d Mbps\n", rate / 2);
-+			sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate);
-+			sinfo->txrate.legacy /= 100;
- 		}
--
--		if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
--			     &ifp->vif->sme_state)) {
--			memset(&scb_val, 0, sizeof(scb_val));
--			err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI,
--						     &scb_val, sizeof(scb_val));
--			if (err) {
--				brcmf_err("Could not get rssi (%d)\n", err);
--				goto done;
--			} else {
--				rssi = le32_to_cpu(scb_val.val);
--				sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
--				sinfo->signal = rssi;
--				brcmf_dbg(CONN, "RSSI %d dBm\n", rssi);
--			}
--			err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_BCNPRD,
--						    &beacon_period);
--			if (err) {
--				brcmf_err("Could not get beacon period (%d)\n",
--					  err);
--				goto done;
--			} else {
--				sinfo->bss_param.beacon_interval =
--					beacon_period;
--				brcmf_dbg(CONN, "Beacon peroid %d\n",
--					  beacon_period);
--			}
--			err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_DTIMPRD,
--						    &dtim_period);
--			if (err) {
--				brcmf_err("Could not get DTIM period (%d)\n",
--					  err);
--				goto done;
--			} else {
--				sinfo->bss_param.dtim_period = dtim_period;
--				brcmf_dbg(CONN, "DTIM peroid %d\n",
--					  dtim_period);
--			}
--			sinfo->filled |= BIT(NL80211_STA_INFO_BSS_PARAM);
-+		if (sinfo->rx_packets) {
-+			sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE);
-+			sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate);
-+			sinfo->rxrate.legacy /= 100;
-+		}
-+		if (le16_to_cpu(sta_info_le.ver) >= 4) {
-+			sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES);
-+			sinfo->tx_bytes = le64_to_cpu(sta_info_le.tx_tot_bytes);
-+			sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES);
-+			sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
- 		}
--	} else
--		err = -EPERM;
-+	}
- done:
- 	brcmf_dbg(TRACE, "Exit\n");
- 	return err;
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -32,7 +32,11 @@
- #define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
- #define BRCMF_BSS_RSSI_ON_CHANNEL	0x0002
- 
--#define BRCMF_STA_ASSOC			0x10		/* Associated */
-+#define BRCMF_STA_WME              0x00000002      /* WMM association */
-+#define BRCMF_STA_AUTHE            0x00000008      /* Authenticated */
-+#define BRCMF_STA_ASSOC            0x00000010      /* Associated */
-+#define BRCMF_STA_AUTHO            0x00000020      /* Authorized */
-+#define BRCMF_STA_SCBSTATS         0x00004000      /* Per STA debug stats */
- 
- /* size of brcmf_scan_params not including variable length array */
- #define BRCMF_SCAN_PARAMS_FIXED_SIZE	64
-@@ -113,6 +117,7 @@
- #define BRCMF_WOWL_MAXPATTERNSIZE	128
- 
- #define BRCMF_COUNTRY_BUF_SZ		4
-+#define BRCMF_ANT_MAX			4
- 
- /* join preference types for join_pref iovar */
- enum brcmf_join_pref_types {
-@@ -456,25 +461,61 @@ struct brcmf_channel_info_le {
- };
- 
- struct brcmf_sta_info_le {
--	__le16	ver;		/* version of this struct */
--	__le16	len;		/* length in bytes of this structure */
--	__le16	cap;		/* sta's advertised capabilities */
--	__le32	flags;		/* flags defined below */
--	__le32	idle;		/* time since data pkt rx'd from sta */
--	u8	ea[ETH_ALEN];		/* Station address */
--	__le32	count;			/* # rates in this set */
--	u8	rates[BRCMF_MAXRATES_IN_SET];	/* rates in 500kbps units */
-+	__le16 ver;		/* version of this struct */
-+	__le16 len;		/* length in bytes of this structure */
-+	__le16 cap;		/* sta's advertised capabilities */
-+	__le32 flags;		/* flags defined below */
-+	__le32 idle;		/* time since data pkt rx'd from sta */
-+	u8 ea[ETH_ALEN];		/* Station address */
-+	__le32 count;			/* # rates in this set */
-+	u8 rates[BRCMF_MAXRATES_IN_SET];	/* rates in 500kbps units */
- 						/* w/hi bit set if basic */
--	__le32	in;		/* seconds elapsed since associated */
--	__le32	listen_interval_inms; /* Min Listen interval in ms for STA */
--	__le32	tx_pkts;	/* # of packets transmitted */
--	__le32	tx_failures;	/* # of packets failed */
--	__le32	rx_ucast_pkts;	/* # of unicast packets received */
--	__le32	rx_mcast_pkts;	/* # of multicast packets received */
--	__le32	tx_rate;	/* Rate of last successful tx frame */
--	__le32	rx_rate;	/* Rate of last successful rx frame */
--	__le32	rx_decrypt_succeeds;	/* # of packet decrypted successfully */
--	__le32	rx_decrypt_failures;	/* # of packet decrypted failed */
-+	__le32 in;		/* seconds elapsed since associated */
-+	__le32 listen_interval_inms; /* Min Listen interval in ms for STA */
-+	__le32 tx_pkts;	/* # of packets transmitted */
-+	__le32 tx_failures;	/* # of packets failed */
-+	__le32 rx_ucast_pkts;	/* # of unicast packets received */
-+	__le32 rx_mcast_pkts;	/* # of multicast packets received */
-+	__le32 tx_rate;	/* Rate of last successful tx frame */
-+	__le32 rx_rate;	/* Rate of last successful rx frame */
-+	__le32 rx_decrypt_succeeds;	/* # of packet decrypted successfully */
-+	__le32 rx_decrypt_failures;	/* # of packet decrypted failed */
-+	__le32 tx_tot_pkts;    /* # of tx pkts (ucast + mcast) */
-+	__le32 rx_tot_pkts;    /* # of data packets recvd (uni + mcast) */
-+	__le32 tx_mcast_pkts;  /* # of mcast pkts txed */
-+	__le64 tx_tot_bytes;   /* data bytes txed (ucast + mcast) */
-+	__le64 rx_tot_bytes;   /* data bytes recvd (ucast + mcast) */
-+	__le64 tx_ucast_bytes; /* data bytes txed (ucast) */
-+	__le64 tx_mcast_bytes; /* # data bytes txed (mcast) */
-+	__le64 rx_ucast_bytes; /* data bytes recvd (ucast) */
-+	__le64 rx_mcast_bytes; /* data bytes recvd (mcast) */
-+	s8 rssi[BRCMF_ANT_MAX];   /* per antenna rssi */
-+	s8 nf[BRCMF_ANT_MAX];     /* per antenna noise floor */
-+	__le16 aid;                    /* association ID */
-+	__le16 ht_capabilities;        /* advertised ht caps */
-+	__le16 vht_flags;              /* converted vht flags */
-+	__le32 tx_pkts_retry_cnt;      /* # of frames where a retry was
-+					 * exhausted.
-+					 */
-+	__le32 tx_pkts_retry_exhausted; /* # of user frames where a retry
-+					 * was exhausted
-+					 */
-+	s8 rx_lastpkt_rssi[BRCMF_ANT_MAX]; /* Per antenna RSSI of last
-+					    * received data frame.
-+					    */
-+	/* TX WLAN retry/failure statistics:
-+	 * Separated for host requested frames and locally generated frames.
-+	 * Include unicast frame only where the retries/failures can be counted.
-+	 */
-+	__le32 tx_pkts_total;          /* # user frames sent successfully */
-+	__le32 tx_pkts_retries;        /* # user frames retries */
-+	__le32 tx_pkts_fw_total;       /* # FW generated sent successfully */
-+	__le32 tx_pkts_fw_retries;     /* # retries for FW generated frames */
-+	__le32 tx_pkts_fw_retry_exhausted;     /* # FW generated where a retry
-+						* was exhausted
-+						*/
-+	__le32 rx_pkts_retried;        /* # rx with retry bit set */
-+	__le32 tx_rate_fallback;       /* lowest fallback TX rate */
- };
- 
- struct brcmf_chanspec_list {
diff --git a/package/kernel/mac80211/patches/359-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch b/package/kernel/mac80211/patches/359-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch
deleted file mode 100644
index 302bc3ed15..0000000000
--- a/package/kernel/mac80211/patches/359-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:20 +0200
-Subject: [PATCH] brcmfmac: have sdio return -EIO when device communication
- is not possible
-
-The bus interface functions txctl and rxctl may be used while the device
-can not be accessed, eg. upon driver .remove() callback. This patch will
-immediately return -EIO when this is the case which speeds up the module
-unload.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -988,6 +988,7 @@ static void brcmf_sdiod_freezer_detach(s
- 
- static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
- {
-+	sdiodev->state = BRCMF_SDIOD_DOWN;
- 	if (sdiodev->bus) {
- 		brcmf_sdio_remove(sdiodev->bus);
- 		sdiodev->bus = NULL;
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2820,6 +2820,8 @@ static int brcmf_sdio_bus_txdata(struct
- 	struct brcmf_sdio *bus = sdiodev->bus;
- 
- 	brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);
-+	if (sdiodev->state != BRCMF_SDIOD_DATA)
-+		return -EIO;
- 
- 	/* Add space for the header */
- 	skb_push(pkt, bus->tx_hdrlen);
-@@ -2948,6 +2950,8 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	int ret;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
-+	if (sdiodev->state != BRCMF_SDIOD_DATA)
-+		return -EIO;
- 
- 	/* Send from dpc */
- 	bus->ctrl_frame_buf = msg;
-@@ -3238,6 +3242,8 @@ brcmf_sdio_bus_rxctl(struct device *dev,
- 	struct brcmf_sdio *bus = sdiodev->bus;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
-+	if (sdiodev->state != BRCMF_SDIOD_DATA)
-+		return -EIO;
- 
- 	/* Wait until control frame is available */
- 	timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending);
diff --git a/package/kernel/mac80211/patches/359-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch b/package/kernel/mac80211/patches/359-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch
deleted file mode 100644
index 34af6d2acf..0000000000
--- a/package/kernel/mac80211/patches/359-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 2 Jul 2015 13:35:05 +0200
-Subject: [PATCH] ath9k: make DMA stop related messages debug-only
-
-A long time ago, ath9k had issues during reset where the DMA engine
-would stay active and could potentially corrupt memory.
-To debug those issues, the driver would print warnings whenever they
-occur.
-
-Nowadays, these issues are gone and the primary cause of these messages
-is if the MAC is stuck during reset or busy processing a long
-transmission. This is fairly harmless, yet these messages continue to
-worry users.
-
-To reduce the number of bogus bug reports, turn these messages into
-debug messages and count their occurence in the "reset" debugfs file.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -765,6 +765,8 @@ static int read_file_reset(struct seq_fi
- 		[RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
- 		[RESET_TYPE_MCI] = "MCI Reset",
- 		[RESET_TYPE_CALIBRATION] = "Calibration error",
-+		[RESET_TX_DMA_ERROR] = "Tx DMA stop error",
-+		[RESET_RX_DMA_ERROR] = "Rx DMA stop error",
- 	};
- 	int i;
- 
---- a/drivers/net/wireless/ath/ath9k/debug.h
-+++ b/drivers/net/wireless/ath/ath9k/debug.h
-@@ -50,6 +50,8 @@ enum ath_reset_type {
- 	RESET_TYPE_BEACON_STUCK,
- 	RESET_TYPE_MCI,
- 	RESET_TYPE_CALIBRATION,
-+	RESET_TX_DMA_ERROR,
-+	RESET_RX_DMA_ERROR,
- 	__RESET_TYPE_MAX
- };
- 
---- a/drivers/net/wireless/ath/ath9k/recv.c
-+++ b/drivers/net/wireless/ath/ath9k/recv.c
-@@ -496,10 +496,9 @@ bool ath_stoprecv(struct ath_softc *sc)
- 
- 	if (!(ah->ah_flags & AH_UNPLUGGED) &&
- 	    unlikely(!stopped)) {
--		ath_err(ath9k_hw_common(sc->sc_ah),
--			"Could not stop RX, we could be "
--			"confusing the DMA engine when we start RX up\n");
--		ATH_DBG_WARN_ON_ONCE(!stopped);
-+		ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
-+			"Failed to stop Rx DMA\n");
-+		RESET_STAT_INC(sc, RESET_RX_DMA_ERROR);
- 	}
- 	return stopped && !reset;
- }
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1896,8 +1896,11 @@ bool ath_drain_all_txq(struct ath_softc
- 			npend |= BIT(i);
- 	}
- 
--	if (npend)
--		ath_err(common, "Failed to stop TX DMA, queues=0x%03x!\n", npend);
-+	if (npend) {
-+		RESET_STAT_INC(sc, RESET_TX_DMA_ERROR);
-+		ath_dbg(common, RESET,
-+			"Failed to stop TX DMA, queues=0x%03x!\n", npend);
-+	}
- 
- 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
- 		if (!ATH_TXQ_SETUP(sc, i))
diff --git a/package/kernel/mac80211/patches/359-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch b/package/kernel/mac80211/patches/359-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch
deleted file mode 100644
index 06f2dce83f..0000000000
--- a/package/kernel/mac80211/patches/359-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:21 +0200
-Subject: [PATCH] brcmfmac: free ifp for non-netdev interface in p2p module
-
-Making it more clear by freeing the ifp in same place where the
-vif object is freed.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -867,8 +867,6 @@ static void brcmf_del_if(struct brcmf_pu
- 		}
- 		/* unregister will take care of freeing it */
- 		unregister_netdev(ifp->ndev);
--	} else {
--		kfree(ifp);
- 	}
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2238,6 +2238,7 @@ static void brcmf_p2p_delete_p2pdev(stru
- {
- 	cfg80211_unregister_wdev(&vif->wdev);
- 	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
-+	kfree(vif->ifp);
- 	brcmf_free_vif(vif);
- }
- 
-@@ -2361,6 +2362,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 		break;
- 
- 	case NL80211_IFTYPE_P2P_DEVICE:
-+		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
-+		brcmf_p2p_deinit_discovery(p2p);
- 		brcmf_p2p_delete_p2pdev(p2p, vif);
- 		return 0;
- 	default:
diff --git a/package/kernel/mac80211/patches/359-0007-brcmfmac-move-p2p-attach-detach-functions.patch b/package/kernel/mac80211/patches/359-0007-brcmfmac-move-p2p-attach-detach-functions.patch
deleted file mode 100644
index 0a6e093512..0000000000
--- a/package/kernel/mac80211/patches/359-0007-brcmfmac-move-p2p-attach-detach-functions.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:22 +0200
-Subject: [PATCH] brcmfmac: move p2p attach/detach functions
-
-Moving two functions in p2p.c as is so next change will be
-easier to review.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -1908,105 +1908,6 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
- 
- 
- /**
-- * brcmf_p2p_attach() - attach for P2P.
-- *
-- * @cfg: driver private data for cfg80211 interface.
-- */
--s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg)
--{
--	struct brcmf_if *pri_ifp;
--	struct brcmf_if *p2p_ifp;
--	struct brcmf_cfg80211_vif *p2p_vif;
--	struct brcmf_p2p_info *p2p;
--	struct brcmf_pub *drvr;
--	s32 bssidx;
--	s32 err = 0;
--
--	p2p = &cfg->p2p;
--	p2p->cfg = cfg;
--
--	drvr = cfg->pub;
--
--	pri_ifp = drvr->iflist[0];
--	p2p_ifp = drvr->iflist[1];
--
--	p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif;
--
--	if (p2p_ifp) {
--		p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE,
--					  false);
--		if (IS_ERR(p2p_vif)) {
--			brcmf_err("could not create discovery vif\n");
--			err = -ENOMEM;
--			goto exit;
--		}
--
--		p2p_vif->ifp = p2p_ifp;
--		p2p_ifp->vif = p2p_vif;
--		p2p_vif->wdev.netdev = p2p_ifp->ndev;
--		p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev;
--		SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy));
--
--		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
--
--		brcmf_p2p_generate_bss_mac(p2p, NULL);
--		memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
--		brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
--
--		/* Initialize P2P Discovery in the firmware */
--		err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
--		if (err < 0) {
--			brcmf_err("set p2p_disc error\n");
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--		/* obtain bsscfg index for P2P discovery */
--		err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
--		if (err < 0) {
--			brcmf_err("retrieving discover bsscfg index failed\n");
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--		/* Verify that firmware uses same bssidx as driver !! */
--		if (p2p_ifp->bssidx != bssidx) {
--			brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n",
--				  bssidx, p2p_ifp->bssidx);
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--
--		init_completion(&p2p->send_af_done);
--		INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
--		init_completion(&p2p->afx_hdl.act_frm_scan);
--		init_completion(&p2p->wait_next_af);
--	}
--exit:
--	return err;
--}
--
--
--/**
-- * brcmf_p2p_detach() - detach P2P.
-- *
-- * @p2p: P2P specific data.
-- */
--void brcmf_p2p_detach(struct brcmf_p2p_info *p2p)
--{
--	struct brcmf_cfg80211_vif *vif;
--
--	vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
--	if (vif != NULL) {
--		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
--		brcmf_p2p_deinit_discovery(p2p);
--		/* remove discovery interface */
--		brcmf_free_vif(vif);
--		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
--	}
--	/* just set it all to zero */
--	memset(p2p, 0, sizeof(*p2p));
--}
--
--/**
-  * brcmf_p2p_get_current_chanspec() - Get current operation channel.
-  *
-  * @p2p: P2P specific data.
-@@ -2425,3 +2326,102 @@ void brcmf_p2p_stop_device(struct wiphy
- 	clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state);
- 	mutex_unlock(&cfg->usr_sync);
- }
-+
-+/**
-+ * brcmf_p2p_attach() - attach for P2P.
-+ *
-+ * @cfg: driver private data for cfg80211 interface.
-+ */
-+s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg)
-+{
-+	struct brcmf_if *pri_ifp;
-+	struct brcmf_if *p2p_ifp;
-+	struct brcmf_cfg80211_vif *p2p_vif;
-+	struct brcmf_p2p_info *p2p;
-+	struct brcmf_pub *drvr;
-+	s32 bssidx;
-+	s32 err = 0;
-+
-+	p2p = &cfg->p2p;
-+	p2p->cfg = cfg;
-+
-+	drvr = cfg->pub;
-+
-+	pri_ifp = drvr->iflist[0];
-+	p2p_ifp = drvr->iflist[1];
-+
-+	p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif;
-+
-+	if (p2p_ifp) {
-+		p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE,
-+					  false);
-+		if (IS_ERR(p2p_vif)) {
-+			brcmf_err("could not create discovery vif\n");
-+			err = -ENOMEM;
-+			goto exit;
-+		}
-+
-+		p2p_vif->ifp = p2p_ifp;
-+		p2p_ifp->vif = p2p_vif;
-+		p2p_vif->wdev.netdev = p2p_ifp->ndev;
-+		p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev;
-+		SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy));
-+
-+		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
-+
-+		brcmf_p2p_generate_bss_mac(p2p, NULL);
-+		memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
-+		brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
-+
-+		/* Initialize P2P Discovery in the firmware */
-+		err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
-+		if (err < 0) {
-+			brcmf_err("set p2p_disc error\n");
-+			brcmf_free_vif(p2p_vif);
-+			goto exit;
-+		}
-+		/* obtain bsscfg index for P2P discovery */
-+		err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
-+		if (err < 0) {
-+			brcmf_err("retrieving discover bsscfg index failed\n");
-+			brcmf_free_vif(p2p_vif);
-+			goto exit;
-+		}
-+		/* Verify that firmware uses same bssidx as driver !! */
-+		if (p2p_ifp->bssidx != bssidx) {
-+			brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n",
-+				  bssidx, p2p_ifp->bssidx);
-+			brcmf_free_vif(p2p_vif);
-+			goto exit;
-+		}
-+
-+		init_completion(&p2p->send_af_done);
-+		INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
-+		init_completion(&p2p->afx_hdl.act_frm_scan);
-+		init_completion(&p2p->wait_next_af);
-+	}
-+exit:
-+	return err;
-+}
-+
-+/**
-+ * brcmf_p2p_detach() - detach P2P.
-+ *
-+ * @p2p: P2P specific data.
-+ */
-+void brcmf_p2p_detach(struct brcmf_p2p_info *p2p)
-+{
-+	struct brcmf_cfg80211_vif *vif;
-+
-+	vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
-+	if (vif != NULL) {
-+		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
-+		brcmf_p2p_deinit_discovery(p2p);
-+		/* remove discovery interface */
-+		brcmf_free_vif(vif);
-+		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
-+	}
-+	/* just set it all to zero */
-+	memset(p2p, 0, sizeof(*p2p));
-+}
-+
diff --git a/package/kernel/mac80211/patches/359-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch b/package/kernel/mac80211/patches/359-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch
deleted file mode 100644
index 72e8eed61b..0000000000
--- a/package/kernel/mac80211/patches/359-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:23 +0200
-Subject: [PATCH] brcmfmac: assure p2pdev is unregistered upon driver
- unload
-
-When unloading the driver with a p2pdev interface it resulted in
-a warning upon calling wiphy_unregister() and subsequently a crash
-in the driver. This patch assures the p2pdev is unregistered calling
-unregister_wdev() before doing the wiphy_unregister().
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6206,10 +6206,8 @@ void brcmf_cfg80211_detach(struct brcmf_
- 	if (!cfg)
- 		return;
- 
--	WARN_ON(!list_empty(&cfg->vif_list));
--	wiphy_unregister(cfg->wiphy);
- 	brcmf_btcoex_detach(cfg);
--	brcmf_p2p_detach(&cfg->p2p);
-+	wiphy_unregister(cfg->wiphy);
- 	wl_deinit_priv(cfg);
- 	brcmf_free_wiphy(cfg->wiphy);
- }
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1098,6 +1098,7 @@ void brcmf_detach(struct device *dev)
- 
- 	/* stop firmware event handling */
- 	brcmf_fweh_detach(drvr);
-+	brcmf_p2p_detach(&drvr->config->p2p);
- 
- 	brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -16,6 +16,7 @@
- #include <linux/slab.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
- #include <net/cfg80211.h>
- 
- #include <brcmu_wifi.h>
-@@ -2418,8 +2419,9 @@ void brcmf_p2p_detach(struct brcmf_p2p_i
- 		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
- 		brcmf_p2p_deinit_discovery(p2p);
- 		/* remove discovery interface */
--		brcmf_free_vif(vif);
--		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
-+		rtnl_lock();
-+		brcmf_p2p_delete_p2pdev(p2p, vif);
-+		rtnl_unlock();
- 	}
- 	/* just set it all to zero */
- 	memset(p2p, 0, sizeof(*p2p));
diff --git a/package/kernel/mac80211/patches/360-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch b/package/kernel/mac80211/patches/360-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch
deleted file mode 100644
index 179c77e9df..0000000000
--- a/package/kernel/mac80211/patches/360-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 15 Jun 2015 22:48:38 +0200
-Subject: [PATCH] brcmfmac: fix double free of p2pdev interface
-
-When freeing the driver ifp pointer it should also be removed from
-the driver interface list, which is what brcmf_remove_interface()
-does. Otherwise, the ifp pointer will be freed twice triggering
-a kernel oops.
-
-Fixes: f37d69a4babc ("brcmfmac: free ifp for non-netdev interface in p2p module")
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2140,7 +2140,7 @@ static void brcmf_p2p_delete_p2pdev(stru
- {
- 	cfg80211_unregister_wdev(&vif->wdev);
- 	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
--	kfree(vif->ifp);
-+	brcmf_remove_interface(vif->ifp->drvr, vif->ifp->bssidx);
- 	brcmf_free_vif(vif);
- }
- 
diff --git a/package/kernel/mac80211/patches/360-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch b/package/kernel/mac80211/patches/360-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch
deleted file mode 100644
index e4f88b5022..0000000000
--- a/package/kernel/mac80211/patches/360-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 15 Jun 2015 22:48:39 +0200
-Subject: [PATCH] brcmfmac: make brcmf_p2p_detach() call conditional
-
-During verification of error handling in brcmf_cfg80211_attach() a
-null pointer dereference occurred upon calling brcmf_p2p_detach()
-from brcmf_detach(). This should only be called when the
-brcmf_cfg80211_attach() has succeeded.
-
-Fixes: f7a40873d2fa ("brcmfmac: assure p2pdev is unregistered upon driver unload")
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1098,7 +1098,8 @@ void brcmf_detach(struct device *dev)
- 
- 	/* stop firmware event handling */
- 	brcmf_fweh_detach(drvr);
--	brcmf_p2p_detach(&drvr->config->p2p);
-+	if (drvr->config)
-+		brcmf_p2p_detach(&drvr->config->p2p);
- 
- 	brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
- 
diff --git a/package/kernel/mac80211/patches/361-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch b/package/kernel/mac80211/patches/361-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch
deleted file mode 100644
index 0a81237a28..0000000000
--- a/package/kernel/mac80211/patches/361-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Thu, 9 Jul 2015 17:07:08 +0200
-Subject: [PATCH] brcmfmac: set wiphy's addresses to provide valid MACs
-
-Broadcom's firmware requires every BSS to use MAC address with unique
-last few bits. The amount of bits may depend on a particular firmware,
-it was verified to be 2 for BCM43602 one.
-If this condition won't be fulfilled firmware will reject such MAC:
-brcmfmac: _brcmf_set_mac_address: Setting cur_etheraddr failed, -52
-
-We don't want to simply set addr_mask as it would also disallow using
-locally administrated bit. Instead let's build a list of addresses
-manually enabling 0x2 bit for extra interfaces.
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5784,6 +5784,7 @@ static void brcmf_wiphy_wowl_params(stru
- 
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
-+	struct brcmf_pub *drvr = ifp->drvr;
- 	struct ieee80211_supported_band *band;
- 	__le32 bandlist[3];
- 	u32 n_bands;
-@@ -5797,6 +5798,19 @@ static int brcmf_setup_wiphy(struct wiph
- 	if (err)
- 		return err;
- 
-+	for (i = 0; i < wiphy->iface_combinations->max_interfaces &&
-+	     i < ARRAY_SIZE(drvr->addresses); i++) {
-+		u8 *addr = drvr->addresses[i].addr;
-+
-+		memcpy(addr, drvr->mac, ETH_ALEN);
-+		if (i) {
-+			addr[0] |= BIT(1);
-+			addr[ETH_ALEN - 1] ^= i;
-+		}
-+	}
-+	wiphy->addresses = drvr->addresses;
-+	wiphy->n_addresses = i;
-+
- 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
- 	wiphy->cipher_suites = __wl_cipher_suites;
- 	wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites);
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -21,6 +21,7 @@
- #ifndef BRCMFMAC_CORE_H
- #define BRCMFMAC_CORE_H
- 
-+#include <net/cfg80211.h>
- #include "fweh.h"
- 
- #define TOE_TX_CSUM_OL		0x00000001
-@@ -118,6 +119,8 @@ struct brcmf_pub {
- 	/* Multicast data packets sent to dongle */
- 	unsigned long tx_multicast;
- 
-+	struct mac_address addresses[BRCMF_MAX_IFS];
-+
- 	struct brcmf_if *iflist[BRCMF_MAX_IFS];
- 
- 	struct mutex proto_block;
diff --git a/package/kernel/mac80211/patches/362-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch b/package/kernel/mac80211/patches/362-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch
deleted file mode 100644
index e44f121ea3..0000000000
--- a/package/kernel/mac80211/patches/362-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
-Date: Thu, 9 Jul 2015 13:43:18 +0530
-Subject: [PATCH] brcmfmac: dhd_sdio.c: use existing atomic_or primitive
-
-There's already a generic implementation so use that instead.
-
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2564,15 +2564,6 @@ static inline void brcmf_sdio_clrintr(st
- 	}
- }
- 
--static void atomic_orr(int val, atomic_t *v)
--{
--	int old_val;
--
--	old_val = atomic_read(v);
--	while (atomic_cmpxchg(v, old_val, val | old_val) != old_val)
--		old_val = atomic_read(v);
--}
--
- static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
- {
- 	struct brcmf_core *buscore;
-@@ -2595,7 +2586,7 @@ static int brcmf_sdio_intr_rstatus(struc
- 	if (val) {
- 		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
- 		bus->sdcnt.f1regdata++;
--		atomic_orr(val, &bus->intstatus);
-+		atomic_or(val, &bus->intstatus);
- 	}
- 
- 	return ret;
-@@ -2712,7 +2703,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 
- 	/* Keep still-pending events for next scheduling */
- 	if (intstatus)
--		atomic_orr(intstatus, &bus->intstatus);
-+		atomic_or(intstatus, &bus->intstatus);
- 
- 	brcmf_sdio_clrintr(bus);
- 
diff --git a/package/kernel/mac80211/patches/363-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch b/package/kernel/mac80211/patches/363-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch
deleted file mode 100644
index 76ca143df5..0000000000
--- a/package/kernel/mac80211/patches/363-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Aug 2015 00:16:42 +0200
-Subject: [PATCH] brcmfmac: check all combinations when setting wiphy's
- addresses
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom is working on better reflection of interface combinations. With
-upcoming patches we may have 1st combination supporting less interfaces
-than others.
-To don't run out of addresses check all combinations to find the one
-with the greatest max_interfaces value.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5785,7 +5785,9 @@ static void brcmf_wiphy_wowl_params(stru
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- 	struct brcmf_pub *drvr = ifp->drvr;
-+	const struct ieee80211_iface_combination *combo;
- 	struct ieee80211_supported_band *band;
-+	u16 max_interfaces = 0;
- 	__le32 bandlist[3];
- 	u32 n_bands;
- 	int err, i;
-@@ -5798,8 +5800,13 @@ static int brcmf_setup_wiphy(struct wiph
- 	if (err)
- 		return err;
- 
--	for (i = 0; i < wiphy->iface_combinations->max_interfaces &&
--	     i < ARRAY_SIZE(drvr->addresses); i++) {
-+	for (i = 0, combo = wiphy->iface_combinations;
-+	     i < wiphy->n_iface_combinations; i++, combo++) {
-+		max_interfaces = max(max_interfaces, combo->max_interfaces);
-+	}
-+
-+	for (i = 0; i < max_interfaces && i < ARRAY_SIZE(drvr->addresses);
-+	     i++) {
- 		u8 *addr = drvr->addresses[i].addr;
- 
- 		memcpy(addr, drvr->mac, ETH_ALEN);
diff --git a/package/kernel/mac80211/patches/363-0002-brcmfmac-correct-interface-combination-info.patch b/package/kernel/mac80211/patches/363-0002-brcmfmac-correct-interface-combination-info.patch
deleted file mode 100644
index c4a0720b35..0000000000
--- a/package/kernel/mac80211/patches/363-0002-brcmfmac-correct-interface-combination-info.patch
+++ /dev/null
@@ -1,204 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:03 +0200
-Subject: [PATCH] brcmfmac: correct interface combination info
-
-The interface combination provided by brcmfmac did not truly reflect
-the combinations supported by driver and/or firmware.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5694,63 +5694,132 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] =
- 	}
- };
- 
-+/**
-+ * brcmf_setup_ifmodes() - determine interface modes and combinations.
-+ *
-+ * @wiphy: wiphy object.
-+ * @ifp: interface object needed for feat module api.
-+ *
-+ * The interface modes and combinations are determined dynamically here
-+ * based on firmware functionality.
-+ *
-+ * no p2p and no mbss:
-+ *
-+ *	#STA <= 1, #AP <= 1, channels = 1, 2 total
-+ *
-+ * no p2p and mbss:
-+ *
-+ *	#STA <= 1, #AP <= 1, channels = 1, 2 total
-+ *	#AP <= 4, matching BI, channels = 1, 4 total
-+ *
-+ * p2p, no mchan, and mbss:
-+ *
-+ *	#STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total
-+ *	#STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
-+ *	#AP <= 4, matching BI, channels = 1, 4 total
-+ *
-+ * p2p, mchan, and mbss:
-+ *
-+ *	#STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total
-+ *	#STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
-+ *	#AP <= 4, matching BI, channels = 1, 4 total
-+ */
- static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- 	struct ieee80211_iface_combination *combo = NULL;
--	struct ieee80211_iface_limit *limits = NULL;
--	int i = 0, max_iface_cnt;
-+	struct ieee80211_iface_limit *c0_limits = NULL;
-+	struct ieee80211_iface_limit *p2p_limits = NULL;
-+	struct ieee80211_iface_limit *mbss_limits = NULL;
-+	bool mbss, p2p;
-+	int i, c, n_combos;
- 
--	combo = kzalloc(sizeof(*combo), GFP_KERNEL);
-+	mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
-+	p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
-+
-+	n_combos = 1 + !!p2p + !!mbss;
-+	combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
- 	if (!combo)
- 		goto err;
- 
--	limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
--	if (!limits)
-+	c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
-+	if (!c0_limits)
- 		goto err;
- 
-+	if (p2p) {
-+		p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
-+		if (!p2p_limits)
-+			goto err;
-+	}
-+
-+	if (mbss) {
-+		mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
-+		if (!mbss_limits)
-+			goto err;
-+	}
-+
- 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
- 				 BIT(NL80211_IFTYPE_ADHOC) |
- 				 BIT(NL80211_IFTYPE_AP);
- 
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
--		combo->num_different_channels = 2;
--	else
--		combo->num_different_channels = 1;
--
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
--		limits[i].max = 1;
--		limits[i++].types = BIT(NL80211_IFTYPE_STATION);
--		limits[i].max = 4;
--		limits[i++].types = BIT(NL80211_IFTYPE_AP);
--		max_iface_cnt = 5;
--	} else {
--		limits[i].max = 2;
--		limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
--				    BIT(NL80211_IFTYPE_AP);
--		max_iface_cnt = 2;
--	}
--
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
-+	c = 0;
-+	i = 0;
-+	combo[c].num_different_channels = 1;
-+	c0_limits[i].max = 1;
-+	c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
-+	if (p2p) {
-+		if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
-+			combo[c].num_different_channels = 2;
- 		wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
- 					  BIT(NL80211_IFTYPE_P2P_GO) |
- 					  BIT(NL80211_IFTYPE_P2P_DEVICE);
--		limits[i].max = 1;
--		limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
--				    BIT(NL80211_IFTYPE_P2P_GO);
--		limits[i].max = 1;
--		limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
--		max_iface_cnt += 2;
--	}
--	combo->max_interfaces = max_iface_cnt;
--	combo->limits = limits;
--	combo->n_limits = i;
-+		c0_limits[i].max = 1;
-+		c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		c0_limits[i].max = 1;
-+		c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+				       BIT(NL80211_IFTYPE_P2P_GO);
-+	} else {
-+		c0_limits[i].max = 1;
-+		c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
-+	}
-+	combo[c].max_interfaces = i;
-+	combo[c].n_limits = i;
-+	combo[c].limits = c0_limits;
-+
-+	if (p2p) {
-+		c++;
-+		i = 0;
-+		combo[c].num_different_channels = 1;
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP);
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		combo[c].max_interfaces = i;
-+		combo[c].n_limits = i;
-+		combo[c].limits = p2p_limits;
-+	}
- 
-+	if (mbss) {
-+		c++;
-+		combo[c].beacon_int_infra_match = true;
-+		combo[c].num_different_channels = 1;
-+		mbss_limits[0].max = 4;
-+		mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
-+		combo[c].max_interfaces = 4;
-+		combo[c].n_limits = 1;
-+		combo[c].limits = mbss_limits;
-+	}
-+	wiphy->n_iface_combinations = n_combos;
- 	wiphy->iface_combinations = combo;
--	wiphy->n_iface_combinations = 1;
- 	return 0;
- 
- err:
--	kfree(limits);
-+	kfree(c0_limits);
-+	kfree(p2p_limits);
-+	kfree(mbss_limits);
- 	kfree(combo);
- 	return -ENOMEM;
- }
-@@ -6079,11 +6148,15 @@ static void brcmf_cfg80211_reg_notifier(
- 
- static void brcmf_free_wiphy(struct wiphy *wiphy)
- {
-+	int i;
-+
- 	if (!wiphy)
- 		return;
- 
--	if (wiphy->iface_combinations)
--		kfree(wiphy->iface_combinations->limits);
-+	if (wiphy->iface_combinations) {
-+		for (i = 0; i < wiphy->n_iface_combinations; i++)
-+			kfree(wiphy->iface_combinations[i].limits);
-+	}
- 	kfree(wiphy->iface_combinations);
- 	if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- 		kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
diff --git a/package/kernel/mac80211/patches/363-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch b/package/kernel/mac80211/patches/363-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch
deleted file mode 100644
index 9768ef2771..0000000000
--- a/package/kernel/mac80211/patches/363-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:04 +0200
-Subject: [PATCH] brcmfmac: add debugfs entry for msgbuf statistics
-
-Expose ring buffer read/write pointers and other useful statistics
-through debugfs.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -1360,6 +1360,60 @@ void brcmf_msgbuf_delete_flowring(struct
- 	}
- }
- 
-+#ifdef DEBUG
-+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
-+{
-+	struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
-+	struct brcmf_pub *drvr = bus_if->drvr;
-+	struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd;
-+	struct brcmf_commonring *commonring;
-+	u16 i;
-+	struct brcmf_flowring_ring *ring;
-+	struct brcmf_flowring_hash *hash;
-+
-+	commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT];
-+	seq_printf(seq, "h2d_ctl_submit: rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_RXPOST_SUBMIT];
-+	seq_printf(seq, "h2d_rx_submit:  rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_CONTROL_COMPLETE];
-+	seq_printf(seq, "d2h_ctl_cmplt:  rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_TX_COMPLETE];
-+	seq_printf(seq, "d2h_tx_cmplt:   rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_RX_COMPLETE];
-+	seq_printf(seq, "d2h_rx_cmplt:   rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+
-+	seq_printf(seq, "\nh2d_flowrings: depth %u\n",
-+		   BRCMF_H2D_TXFLOWRING_MAX_ITEM);
-+	seq_puts(seq, "Active flowrings:\n");
-+	hash = msgbuf->flow->hash;
-+	for (i = 0; i < msgbuf->flow->nrofrings; i++) {
-+		if (!msgbuf->flow->rings[i])
-+			continue;
-+		ring = msgbuf->flow->rings[i];
-+		if (ring->status != RING_OPEN)
-+			continue;
-+		commonring = msgbuf->flowrings[i];
-+		hash = &msgbuf->flow->hash[ring->hash_id];
-+		seq_printf(seq, "id %3u: rp %4u, wp %4u, qlen %4u, blocked %u\n"
-+				"        ifidx %u, fifo %u, da %pM\n",
-+				i, commonring->r_ptr, commonring->w_ptr,
-+				skb_queue_len(&ring->skblist), ring->blocked,
-+				hash->ifidx, hash->fifo, hash->mac);
-+	}
-+
-+	return 0;
-+}
-+#else
-+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
-+{
-+	return 0;
-+}
-+#endif
- 
- int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
- {
-@@ -1460,6 +1514,8 @@ int brcmf_proto_msgbuf_attach(struct brc
- 	spin_lock_init(&msgbuf->flowring_work_lock);
- 	INIT_LIST_HEAD(&msgbuf->work_queue);
- 
-+	brcmf_debugfs_add_entry(drvr, "msgbuf_stats", brcmf_msgbuf_stats_read);
-+
- 	return 0;
- 
- fail:
diff --git a/package/kernel/mac80211/patches/363-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch b/package/kernel/mac80211/patches/363-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch
deleted file mode 100644
index 2b84cf9fcd..0000000000
--- a/package/kernel/mac80211/patches/363-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:05 +0200
-Subject: [PATCH] brcmfmac: make use of cfg80211_check_combinations()
-
-Use cfg80211_check_combinations() so we can bail out early when an
-interface add or change results in an invalid combination.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -469,6 +469,36 @@ brcmf_find_wpsie(const u8 *parse, u32 le
- 	return NULL;
- }
- 
-+static int brcmf_vif_change_validate(struct brcmf_cfg80211_info *cfg,
-+				     struct brcmf_cfg80211_vif *vif,
-+				     enum nl80211_iftype new_type)
-+{
-+	int iftype_num[NUM_NL80211_IFTYPES];
-+	struct brcmf_cfg80211_vif *pos;
-+
-+	memset(&iftype_num[0], 0, sizeof(iftype_num));
-+	list_for_each_entry(pos, &cfg->vif_list, list)
-+		if (pos == vif)
-+			iftype_num[new_type]++;
-+		else
-+			iftype_num[pos->wdev.iftype]++;
-+
-+	return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num);
-+}
-+
-+static int brcmf_vif_add_validate(struct brcmf_cfg80211_info *cfg,
-+				  enum nl80211_iftype new_type)
-+{
-+	int iftype_num[NUM_NL80211_IFTYPES];
-+	struct brcmf_cfg80211_vif *pos;
-+
-+	memset(&iftype_num[0], 0, sizeof(iftype_num));
-+	list_for_each_entry(pos, &cfg->vif_list, list)
-+		iftype_num[pos->wdev.iftype]++;
-+
-+	iftype_num[new_type]++;
-+	return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num);
-+}
- 
- static void convert_key_from_CPU(struct brcmf_wsec_key *key,
- 				 struct brcmf_wsec_key_le *key_le)
-@@ -662,8 +692,14 @@ static struct wireless_dev *brcmf_cfg802
- 						     struct vif_params *params)
- {
- 	struct wireless_dev *wdev;
-+	int err;
- 
- 	brcmf_dbg(TRACE, "enter: %s type %d\n", name, type);
-+	err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type);
-+	if (err) {
-+		brcmf_err("iface validation failed: err=%d\n", err);
-+		return ERR_PTR(err);
-+	}
- 	switch (type) {
- 	case NL80211_IFTYPE_ADHOC:
- 	case NL80211_IFTYPE_STATION:
-@@ -822,8 +858,12 @@ brcmf_cfg80211_change_iface(struct wiphy
- 	s32 ap = 0;
- 	s32 err = 0;
- 
--	brcmf_dbg(TRACE, "Enter, ndev=%p, type=%d\n", ndev, type);
--
-+	brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type);
-+	err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
-+	if (err) {
-+		brcmf_err("iface validation failed: err=%d\n", err);
-+		return err;
-+	}
- 	switch (type) {
- 	case NL80211_IFTYPE_MONITOR:
- 	case NL80211_IFTYPE_WDS:
diff --git a/package/kernel/mac80211/patches/363-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch b/package/kernel/mac80211/patches/363-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch
deleted file mode 100644
index 2d5f7b9be7..0000000000
--- a/package/kernel/mac80211/patches/363-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:06 +0200
-Subject: [PATCH] brcmfmac: block the correct flowring when backup queue
- overflow
-
-brcmf_flowring_block blocks the last active flowring under the same
-interface instead of the one provided by caller. This could lead to a
-dead lock of netif stop if there are more than one flowring under the
-interface and the traffic is high enough so brcmf_flowring_enqueue can
-not unblock the ring right away.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-@@ -194,11 +194,15 @@ static void brcmf_flowring_block(struct
- 	spin_lock_irqsave(&flow->block_lock, flags);
- 
- 	ring = flow->rings[flowid];
-+	if (ring->blocked == blocked) {
-+		spin_unlock_irqrestore(&flow->block_lock, flags);
-+		return;
-+	}
- 	ifidx = brcmf_flowring_ifidx_get(flow, flowid);
- 
- 	currently_blocked = false;
- 	for (i = 0; i < flow->nrofrings; i++) {
--		if (flow->rings[i]) {
-+		if ((flow->rings[i]) && (i != flowid)) {
- 			ring = flow->rings[i];
- 			if ((ring->status == RING_OPEN) &&
- 			    (brcmf_flowring_ifidx_get(flow, i) == ifidx)) {
-@@ -209,8 +213,8 @@ static void brcmf_flowring_block(struct
- 			}
- 		}
- 	}
--	ring->blocked = blocked;
--	if (currently_blocked == blocked) {
-+	flow->rings[flowid]->blocked = blocked;
-+	if (currently_blocked) {
- 		spin_unlock_irqrestore(&flow->block_lock, flags);
- 		return;
- 	}
diff --git a/package/kernel/mac80211/patches/363-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch b/package/kernel/mac80211/patches/363-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch
deleted file mode 100644
index 7378401c52..0000000000
--- a/package/kernel/mac80211/patches/363-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:07 +0200
-Subject: [PATCH] brcmfmac: bump highest event number for 4339 firmware
-
-The event mask length is determined by the highest event number
-that is specified in the driver. When this length is shorter than
-firmware expects setting event mask will fail and device becomes
-pretty useless. This issue was reported with bcm4339 firmware that
-was recently released.
-
-Reported-by: Pontus Fuchs <pontusf@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-@@ -85,7 +85,6 @@ struct brcmf_event;
- 	BRCMF_ENUM_DEF(IF, 54) \
- 	BRCMF_ENUM_DEF(P2P_DISC_LISTEN_COMPLETE, 55) \
- 	BRCMF_ENUM_DEF(RSSI, 56) \
--	BRCMF_ENUM_DEF(PFN_SCAN_COMPLETE, 57) \
- 	BRCMF_ENUM_DEF(EXTLOG_MSG, 58) \
- 	BRCMF_ENUM_DEF(ACTION_FRAME, 59) \
- 	BRCMF_ENUM_DEF(ACTION_FRAME_COMPLETE, 60) \
-@@ -103,8 +102,7 @@ struct brcmf_event;
- 	BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \
- 	BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) \
- 	BRCMF_ENUM_DEF(TDLS_PEER_EVENT, 92) \
--	BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127) \
--	BRCMF_ENUM_DEF(PSTA_PRIMARY_INTF_IND, 128)
-+	BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127)
- 
- #define BRCMF_ENUM_DEF(id, val) \
- 	BRCMF_E_##id = (val),
-@@ -112,7 +110,11 @@ struct brcmf_event;
- /* firmware event codes sent by the dongle */
- enum brcmf_fweh_event_code {
- 	BRCMF_FWEH_EVENT_ENUM_DEFLIST
--	BRCMF_E_LAST
-+	/* this determines event mask length which must match
-+	 * minimum length check in device firmware so it is
-+	 * hard-coded here.
-+	 */
-+	BRCMF_E_LAST = 139
- };
- #undef BRCMF_ENUM_DEF
- 
diff --git a/package/kernel/mac80211/patches/365-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch b/package/kernel/mac80211/patches/365-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch
deleted file mode 100644
index 97444b3c0d..0000000000
--- a/package/kernel/mac80211/patches/365-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:53 +0200
-Subject: [PATCH] brcmfmac: consolidate ifp lookup in driver core
-
-In rx path the firmware provide an interface index which is used to
-map to a struct brcmf_if instance. However, this involves some trick
-that is done in two places. This is changed by having driver core
-providing brcmf_get_ifp() function.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-@@ -276,6 +276,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 			 struct sk_buff *pktbuf)
- {
- 	struct brcmf_proto_bcdc_header *h;
-+	struct brcmf_if *ifp;
- 
- 	brcmf_dbg(BCDC, "Enter\n");
- 
-@@ -289,30 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 	trace_brcmf_bcdchdr(pktbuf->data);
- 	h = (struct brcmf_proto_bcdc_header *)(pktbuf->data);
- 
--	*ifidx = BCDC_GET_IF_IDX(h);
--	if (*ifidx >= BRCMF_MAX_IFS) {
--		brcmf_err("rx data ifnum out of range (%d)\n", *ifidx);
-+	ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
-+	if (IS_ERR_OR_NULL(ifp)) {
-+		brcmf_dbg(INFO, "no matching ifp found\n");
- 		return -EBADE;
- 	}
--	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
--	 * events this is easy because it contains the bssidx which maps
--	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
--	 * bssidx 1 is used for p2p0 and no data can be received or
--	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
--	 */
--	if (*ifidx)
--		(*ifidx)++;
--
- 	if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
- 	    BCDC_PROTO_VER) {
- 		brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
--			  brcmf_ifname(drvr, *ifidx), h->flags);
-+			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
- 		return -EBADE;
- 	}
- 
- 	if (h->flags & BCDC_FLAG_SUM_GOOD) {
- 		brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n",
--			  brcmf_ifname(drvr, *ifidx), h->flags);
-+			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
- 		pktbuf->ip_summed = CHECKSUM_UNNECESSARY;
- 	}
- 
-@@ -320,12 +312,15 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 
- 	skb_pull(pktbuf, BCDC_HEADER_LEN);
- 	if (do_fws)
--		brcmf_fws_hdrpull(drvr, *ifidx, h->data_offset << 2, pktbuf);
-+		brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2,
-+				  pktbuf);
- 	else
- 		skb_pull(pktbuf, h->data_offset << 2);
- 
- 	if (pktbuf->len == 0)
- 		return -ENODATA;
-+
-+	*ifidx = ifp->ifidx;
- 	return 0;
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -83,6 +83,25 @@ char *brcmf_ifname(struct brcmf_pub *drv
- 	return "<if_none>";
- }
- 
-+struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
-+{
-+	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
-+		brcmf_err("ifidx %d out of range\n", ifidx);
-+		return ERR_PTR(-ERANGE);
-+	}
-+
-+	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
-+	 * events this is easy because it contains the bssidx which maps
-+	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
-+	 * bssidx 1 is used for p2p0 and no data can be received or
-+	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
-+	 */
-+	if (ifidx)
-+		ifidx++;
-+
-+	return drvr->iflist[ifidx];
-+}
-+
- static void _brcmf_set_multicast_list(struct work_struct *work)
- {
- 	struct brcmf_if *ifp;
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -202,7 +202,7 @@ int brcmf_netdev_wait_pend8021x(struct b
- 
- /* Return pointer to interface name */
- char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
--
-+struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
- 			      char *name, u8 *mac_addr);
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -1081,16 +1081,8 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf
- {
- 	struct brcmf_if *ifp;
- 
--	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
--	 * events this is easy because it contains the bssidx which maps
--	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
--	 * bssidx 1 is used for p2p0 and no data can be received or
--	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
--	 */
--	if (ifidx)
--		(ifidx)++;
--	ifp = msgbuf->drvr->iflist[ifidx];
--	if (!ifp || !ifp->ndev) {
-+	ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
-+	if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) {
- 		brcmf_err("Received pkt for invalid ifidx %d\n", ifidx);
- 		brcmu_pkt_buf_free_skb(skb);
- 		return;
diff --git a/package/kernel/mac80211/patches/365-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch b/package/kernel/mac80211/patches/365-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch
deleted file mode 100644
index 632714ce24..0000000000
--- a/package/kernel/mac80211/patches/365-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch
+++ /dev/null
@@ -1,222 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:54 +0200
-Subject: [PATCH] brcmfmac: make brcmf_proto_hdrpull() return struct
- brcmf_if instance
-
-Avoid spreading the ifidx in the driver, but have it return the
-struct brcmf_if instance.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-@@ -272,11 +272,11 @@ brcmf_proto_bcdc_hdrpush(struct brcmf_pu
- }
- 
- static int
--brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
--			 struct sk_buff *pktbuf)
-+brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws,
-+			 struct sk_buff *pktbuf, struct brcmf_if **ifp)
- {
- 	struct brcmf_proto_bcdc_header *h;
--	struct brcmf_if *ifp;
-+	struct brcmf_if *tmp_if;
- 
- 	brcmf_dbg(BCDC, "Enter\n");
- 
-@@ -290,21 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 	trace_brcmf_bcdchdr(pktbuf->data);
- 	h = (struct brcmf_proto_bcdc_header *)(pktbuf->data);
- 
--	ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
--	if (IS_ERR_OR_NULL(ifp)) {
-+	tmp_if = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
-+	if (!tmp_if) {
- 		brcmf_dbg(INFO, "no matching ifp found\n");
- 		return -EBADE;
- 	}
- 	if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
- 	    BCDC_PROTO_VER) {
- 		brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
--			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
-+			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
- 		return -EBADE;
- 	}
- 
- 	if (h->flags & BCDC_FLAG_SUM_GOOD) {
- 		brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n",
--			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
-+			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
- 		pktbuf->ip_summed = CHECKSUM_UNNECESSARY;
- 	}
- 
-@@ -312,7 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 
- 	skb_pull(pktbuf, BCDC_HEADER_LEN);
- 	if (do_fws)
--		brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2,
-+		brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2,
- 				  pktbuf);
- 	else
- 		skb_pull(pktbuf, h->data_offset << 2);
-@@ -320,7 +320,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 	if (pktbuf->len == 0)
- 		return -ENODATA;
- 
--	*ifidx = ifp->ifidx;
-+	*ifp = tmp_if;
- 	return 0;
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -87,7 +87,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
- {
- 	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
- 		brcmf_err("ifidx %d out of range\n", ifidx);
--		return ERR_PTR(-ERANGE);
-+		return NULL;
- 	}
- 
- 	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
-@@ -539,17 +539,15 @@ void brcmf_rx_frame(struct device *dev,
- 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- 	struct brcmf_pub *drvr = bus_if->drvr;
- 	struct brcmf_skb_reorder_data *rd;
--	u8 ifidx;
- 	int ret;
- 
- 	brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
- 
- 	/* process and remove protocol-specific header */
--	ret = brcmf_proto_hdrpull(drvr, true, &ifidx, skb);
--	ifp = drvr->iflist[ifidx];
-+	ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp);
- 
- 	if (ret || !ifp || !ifp->ndev) {
--		if ((ret != -ENODATA) && ifp)
-+		if (ret != -ENODATA && ifp)
- 			ifp->stats.rx_errors++;
- 		brcmu_pkt_buf_free_skb(skb);
- 		return;
-@@ -592,17 +590,17 @@ void brcmf_txcomplete(struct device *dev
- {
- 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- 	struct brcmf_pub *drvr = bus_if->drvr;
--	u8 ifidx;
-+	struct brcmf_if *ifp;
- 
- 	/* await txstatus signal for firmware if active */
- 	if (brcmf_fws_fc_active(drvr->fws)) {
- 		if (!success)
- 			brcmf_fws_bustxfail(drvr->fws, txp);
- 	} else {
--		if (brcmf_proto_hdrpull(drvr, false, &ifidx, txp))
-+		if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
- 			brcmu_pkt_buf_free_skb(txp);
- 		else
--			brcmf_txfinalize(drvr, txp, ifidx, success);
-+			brcmf_txfinalize(drvr, txp, ifp->ifidx, success);
- 	}
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1448,7 +1448,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 	struct sk_buff *skb;
- 	struct brcmf_skbuff_cb *skcb;
- 	struct brcmf_fws_mac_descriptor *entry = NULL;
--	u8 ifidx;
-+	struct brcmf_if *ifp;
- 
- 	brcmf_dbg(DATA, "flags %d\n", flags);
- 
-@@ -1497,15 +1497,16 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 	}
- 	brcmf_fws_macdesc_return_req_credit(skb);
- 
--	if (brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb)) {
-+	ret = brcmf_proto_hdrpull(fws->drvr, false, skb, &ifp);
-+	if (ret) {
- 		brcmu_pkt_buf_free_skb(skb);
- 		return -EINVAL;
- 	}
- 	if (!remove_from_hanger)
--		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifidx,
-+		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
- 						    genbit, seq);
- 	if (remove_from_hanger || ret)
--		brcmf_txfinalize(fws->drvr, skb, ifidx, true);
-+		brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true);
- 
- 	return 0;
- }
-@@ -1848,7 +1849,7 @@ static int brcmf_fws_commit_skb(struct b
- 		entry->transit_count--;
- 		if (entry->suppressed)
- 			entry->suppr_transit_count--;
--		brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
-+		(void)brcmf_proto_hdrpull(fws->drvr, false, skb, NULL);
- 		goto rollback;
- 	}
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -522,7 +522,7 @@ static int brcmf_msgbuf_set_dcmd(struct
- 
- 
- static int brcmf_msgbuf_hdrpull(struct brcmf_pub *drvr, bool do_fws,
--				u8 *ifidx, struct sk_buff *skb)
-+				struct sk_buff *skb, struct brcmf_if **ifp)
- {
- 	return -ENODEV;
- }
-@@ -1082,7 +1082,7 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf
- 	struct brcmf_if *ifp;
- 
- 	ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
--	if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) {
-+	if (!ifp || !ifp->ndev) {
- 		brcmf_err("Received pkt for invalid ifidx %d\n", ifidx);
- 		brcmu_pkt_buf_free_skb(skb);
- 		return;
---- a/drivers/net/wireless/brcm80211/brcmfmac/proto.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.h
-@@ -24,8 +24,8 @@ enum proto_addr_mode {
- 
- 
- struct brcmf_proto {
--	int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
--		       struct sk_buff *skb);
-+	int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws,
-+		       struct sk_buff *skb, struct brcmf_if **ifp);
- 	int (*query_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd,
- 			  void *buf, uint len);
- 	int (*set_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf,
-@@ -46,9 +46,19 @@ int brcmf_proto_attach(struct brcmf_pub
- void brcmf_proto_detach(struct brcmf_pub *drvr);
- 
- static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
--				      u8 *ifidx, struct sk_buff *skb)
-+				      struct sk_buff *skb,
-+				      struct brcmf_if **ifp)
- {
--	return drvr->proto->hdrpull(drvr, do_fws, ifidx, skb);
-+	struct brcmf_if *tmp = NULL;
-+
-+	/* assure protocol is always called with
-+	 * non-null initialized pointer.
-+	 */
-+	if (ifp)
-+		*ifp = NULL;
-+	else
-+		ifp = &tmp;
-+	return drvr->proto->hdrpull(drvr, do_fws, skb, ifp);
- }
- static inline int brcmf_proto_query_dcmd(struct brcmf_pub *drvr, int ifidx,
- 					 uint cmd, void *buf, uint len)
diff --git a/package/kernel/mac80211/patches/365-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch b/package/kernel/mac80211/patches/365-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch
deleted file mode 100644
index 2d15a77154..0000000000
--- a/package/kernel/mac80211/patches/365-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:55 +0200
-Subject: [PATCH] brcmfmac: change parameters for
- brcmf_remove_interface()
-
-Just pass the interface to be removed, ie. the struct brcmf_if instance.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -4982,7 +4982,7 @@ brcmf_notify_connect_status_ap(struct br
- 		brcmf_dbg(CONN, "AP mode link down\n");
- 		complete(&cfg->vif_disabled);
- 		if (ifp->vif->mbss)
--			brcmf_remove_interface(ifp->drvr, ifp->bssidx);
-+			brcmf_remove_interface(ifp);
- 		return 0;
- 	}
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -887,12 +887,13 @@ static void brcmf_del_if(struct brcmf_pu
- 	}
- }
- 
--void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx)
-+void brcmf_remove_interface(struct brcmf_if *ifp)
- {
--	if (drvr->iflist[bssidx]) {
--		brcmf_fws_del_interface(drvr->iflist[bssidx]);
--		brcmf_del_if(drvr, bssidx);
--	}
-+	if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp))
-+		return;
-+
-+	brcmf_fws_del_interface(ifp);
-+	brcmf_del_if(ifp->drvr, ifp->bssidx);
- }
- 
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr)
-@@ -1122,7 +1123,7 @@ void brcmf_detach(struct device *dev)
- 
- 	/* make sure primary interface removed last */
- 	for (i = BRCMF_MAX_IFS-1; i > -1; i--)
--		brcmf_remove_interface(drvr, i);
-+		brcmf_remove_interface(drvr->iflist[i]);
- 
- 	brcmf_cfg80211_detach(drvr->config);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -206,7 +206,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
- 			      char *name, u8 *mac_addr);
--void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx);
-+void brcmf_remove_interface(struct brcmf_if *ifp);
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
- void brcmf_txflowblock_if(struct brcmf_if *ifp,
- 			  enum brcmf_netif_stop_reason reason, bool state);
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -222,7 +222,7 @@ static void brcmf_fweh_handle_if_event(s
- 	err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
- 
- 	if (ifp && ifevent->action == BRCMF_E_IF_DEL)
--		brcmf_remove_interface(drvr, ifevent->bssidx);
-+		brcmf_remove_interface(ifp);
- }
- 
- /**
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2140,7 +2140,7 @@ static void brcmf_p2p_delete_p2pdev(stru
- {
- 	cfg80211_unregister_wdev(&vif->wdev);
- 	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
--	brcmf_remove_interface(vif->ifp->drvr, vif->ifp->bssidx);
-+	brcmf_remove_interface(vif->ifp);
- 	brcmf_free_vif(vif);
- }
- 
diff --git a/package/kernel/mac80211/patches/365-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch b/package/kernel/mac80211/patches/365-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch
deleted file mode 100644
index 2b61f4eda5..0000000000
--- a/package/kernel/mac80211/patches/365-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:56 +0200
-Subject: [PATCH] brcmfmac: only call brcmf_cfg80211_detach() when attach
- was successful
-
-In brcmf_bus_start() the function brcmf_cfg80211_attach() is called which
-may fail. If this happens we should not call brcmf_cfg80211_detach() in
-the failure path as it will result in NULL pointer dereference:
-
-  brcmf_fweh_activate_events: Set event_msgs error (-5)
-  brcmf_bus_start: failed: -5
-  brcmf_sdio_firmware_callback: dongle is not responding
-  BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
-  IP: [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
-  PGD 0
-  Oops: 0000 [#1] SMP
-  Modules linked in: brcmfmac(O) brcmutil(O) cfg80211 auth_rpcgss
-  CPU: 1 PID: 45 Comm: kworker/1:1 Tainted: G           O
-  Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
-  Workqueue: events request_firmware_work_func
-  task: ffff880036c09ac0 ti: ffff880036dd4000 task.ti: ffff880036dd4000
-  RIP: 0010:[<ffffffff811e8f08>]  [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
-  RSP: 0018:ffff880036dd7a28  EFLAGS: 00010246
-  RAX: ffff880036c09ac0 RBX: 0000000000000000 RCX: 000000007fffffff
-  RDX: 0000000000000000 RSI: ffffffff816578b9 RDI: 0000000000000000
-  RBP: ffff880036dd7a48 R08: 0000000000000000 R09: ffff880036c0b340
-  R10: 00000000000002ec R11: ffff880036dd7b08 R12: ffffffff816578b9
-  R13: 0000000000000000 R14: ffffffff816578b9 R15: ffff8800c6c87000
-  FS:  0000000000000000(0000) GS:ffff88012bc40000(0000) knlGS:0000000000000000
-  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
-  CR2: 0000000000000068 CR3: 0000000001a0b000 CR4: 00000000000006e0
-  Stack:
-   0000000000000000 ffffffff816578b9 0000000000000000 ffff8800c0d003c8
-   ffff880036dd7a78 ffffffff811e8ff5 0000000ffffffff1 ffffffff81a9b060
-   ffff8800c789f880 ffff8800c0d00000 ffff880036dd7a98 ffffffff811ebe0d
-  Call Trace:
-   [<ffffffff811e8ff5>] kernfs_find_and_get_ns+0x35/0x60
-   [<ffffffff811ebe0d>] sysfs_unmerge_group+0x1d/0x60
-   [<ffffffff81404ef2>] dpm_sysfs_remove+0x22/0x60
-   [<ffffffff813f9db9>] device_del+0x49/0x240
-   [<ffffffff815da768>] rfkill_unregister+0x58/0xc0
-   [<ffffffffa06bd91b>] wiphy_unregister+0xab/0x2f0 [cfg80211]
-   [<ffffffffa0742fe3>] brcmf_cfg80211_detach+0x23/0x50 [brcmfmac]
-   [<ffffffffa074d986>] brcmf_detach+0x86/0xe0 [brcmfmac]
-   [<ffffffffa0757de8>] brcmf_sdio_remove+0x48/0x120 [brcmfmac]
-   [<ffffffffa0758ed9>] brcmf_sdiod_remove+0x29/0xd0 [brcmfmac]
-   [<ffffffffa0759031>] brcmf_ops_sdio_remove+0xb1/0x110 [brcmfmac]
-   [<ffffffffa001c267>] sdio_bus_remove+0x37/0x100 [mmc_core]
-   [<ffffffff813fe026>] __device_release_driver+0x96/0x130
-   [<ffffffff813fe0e3>] device_release_driver+0x23/0x30
-   [<ffffffffa0754bc8>] brcmf_sdio_firmware_callback+0x2a8/0x5d0 [brcmfmac]
-   [<ffffffffa074deaf>] brcmf_fw_request_nvram_done+0x15f/0x5e0 [brcmfmac]
-   [<ffffffff8140142f>] ? devres_add+0x3f/0x50
-   [<ffffffff810642b5>] ? usermodehelper_read_unlock+0x15/0x20
-   [<ffffffff81400000>] ? platform_match+0x70/0xa0
-   [<ffffffff8140f400>] request_firmware_work_func+0x30/0x60
-   [<ffffffff8106828c>] process_one_work+0x14c/0x3d0
-   [<ffffffff8106862a>] worker_thread+0x11a/0x450
-   [<ffffffff81068510>] ? process_one_work+0x3d0/0x3d0
-   [<ffffffff8106d692>] kthread+0xd2/0xf0
-   [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180
-   [<ffffffff815ed35f>] ret_from_fork+0x3f/0x70
-   [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180
-  Code: e9 40 fe ff ff 48 89 d8 eb 87 66 0f 1f 84 00 00 00 00 00 66 66 66 66
-	90 55 48 89 e5 41 56 49 89 f6 41 55 49 89 d5 31 d2 41 54 53 <0f> b7
-	47 68 48 8b 5f 48 66 c1 e8 05 83 e0 01 4d 85 ed 0f b6 c8
-  RIP  [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
-   RSP <ffff880036dd7a28>
-  CR2: 0000000000000068
-  ---[ end trace 87d6ec0d3fe46740 ]---
-
-Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1049,7 +1049,10 @@ int brcmf_bus_start(struct device *dev)
- fail:
- 	if (ret < 0) {
- 		brcmf_err("failed: %d\n", ret);
--		brcmf_cfg80211_detach(drvr->config);
-+		if (drvr->config) {
-+			brcmf_cfg80211_detach(drvr->config);
-+			drvr->config = NULL;
-+		}
- 		if (drvr->fws) {
- 			brcmf_fws_del_interface(ifp);
- 			brcmf_fws_deinit(drvr);
diff --git a/package/kernel/mac80211/patches/365-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch b/package/kernel/mac80211/patches/365-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch
deleted file mode 100644
index 868b0a82e6..0000000000
--- a/package/kernel/mac80211/patches/365-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:57 +0200
-Subject: [PATCH] brcmfmac: correct detection of p2pdev interface event
-
-The p2pdev interface is setup in firmware resulting in a interface
-event. This event has role and no-if flag. When role is p2p client
-and no-if flag is set it indicates that this is the p2pdev interface.
-This info is used in handling the event and adding interface in the
-driver.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -795,7 +795,7 @@ fail:
- }
- 
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
--			      char *name, u8 *mac_addr)
-+			      bool is_p2pdev, char *name, u8 *mac_addr)
- {
- 	struct brcmf_if *ifp;
- 	struct net_device *ndev;
-@@ -821,7 +821,7 @@ struct brcmf_if *brcmf_add_if(struct brc
- 		}
- 	}
- 
--	if (!brcmf_p2p_enable && bssidx == 1) {
-+	if (!brcmf_p2p_enable && is_p2pdev) {
- 		/* this is P2P_DEVICE interface */
- 		brcmf_dbg(INFO, "allocate non-netdev interface\n");
- 		ifp = kzalloc(sizeof(*ifp), GFP_KERNEL);
-@@ -999,12 +999,12 @@ int brcmf_bus_start(struct device *dev)
- 	brcmf_dbg(TRACE, "\n");
- 
- 	/* add primary networking interface */
--	ifp = brcmf_add_if(drvr, 0, 0, "wlan%d", NULL);
-+	ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d", NULL);
- 	if (IS_ERR(ifp))
- 		return PTR_ERR(ifp);
- 
- 	if (brcmf_p2p_enable)
--		p2p_ifp = brcmf_add_if(drvr, 1, 0, "p2p%d", NULL);
-+		p2p_ifp = brcmf_add_if(drvr, 1, 0, false, "p2p%d", NULL);
- 	else
- 		p2p_ifp = NULL;
- 	if (IS_ERR(p2p_ifp))
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -205,7 +205,7 @@ char *brcmf_ifname(struct brcmf_pub *drv
- struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
--			      char *name, u8 *mac_addr);
-+			      bool is_p2pdev, char *name, u8 *mac_addr);
- void brcmf_remove_interface(struct brcmf_if *ifp);
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
- void brcmf_txflowblock_if(struct brcmf_if *ifp,
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -179,6 +179,7 @@ static void brcmf_fweh_handle_if_event(s
- {
- 	struct brcmf_if_event *ifevent = data;
- 	struct brcmf_if *ifp;
-+	bool is_p2pdev;
- 	int err = 0;
- 
- 	brcmf_dbg(EVENT, "action: %u idx: %u bsscfg: %u flags: %u role: %u\n",
-@@ -186,18 +187,16 @@ static void brcmf_fweh_handle_if_event(s
- 		  ifevent->flags, ifevent->role);
- 
- 	/* The P2P Device interface event must not be ignored
--	 * contrary to what firmware tells us. The only way to
--	 * distinguish the P2P Device is by looking at the ifidx
--	 * and bssidx received.
-+	 * contrary to what firmware tells us.
- 	 */
--	if (!(ifevent->ifidx == 0 && ifevent->bssidx == 1) &&
--	    (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
-+	is_p2pdev = (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) &&
-+		    ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT;
-+	if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
- 		brcmf_dbg(EVENT, "event can be ignored\n");
- 		return;
- 	}
- 	if (ifevent->ifidx >= BRCMF_MAX_IFS) {
--		brcmf_err("invalid interface index: %u\n",
--			  ifevent->ifidx);
-+		brcmf_err("invalid interface index: %u\n", ifevent->ifidx);
- 		return;
- 	}
- 
-@@ -207,7 +206,7 @@ static void brcmf_fweh_handle_if_event(s
- 		brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname,
- 			  emsg->addr);
- 		ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx,
--				   emsg->ifname, emsg->addr);
-+				   is_p2pdev, emsg->ifname, emsg->addr);
- 		if (IS_ERR(ifp))
- 			return;
- 		brcmf_fws_add_interface(ifp);
diff --git a/package/kernel/mac80211/patches/365-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch b/package/kernel/mac80211/patches/365-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch
deleted file mode 100644
index aebbfa6c49..0000000000
--- a/package/kernel/mac80211/patches/365-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:58 +0200
-Subject: [PATCH] brcmfmac: use brcmf_get_ifp() to map ifidx to struct
- brcmf_if instance
-
-The knowledge on how to map the interface index to a struct brcmf_if
-instance is in brcmf_get_ifp() so use that function when only the
-interface index is known instead of accessing brcmf_pub::iflist
-directly.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c
-@@ -149,7 +149,7 @@ static s32 brcmf_btcoex_params_read(stru
- static void brcmf_btcoex_boost_wifi(struct brcmf_btcoex_info *btci,
- 				    bool trump_sco)
- {
--	struct brcmf_if *ifp = btci->cfg->pub->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(btci->cfg->pub, 0);
- 
- 	if (trump_sco && !btci->saved_regs_part2) {
- 		/* this should reduce eSCO agressive
-@@ -468,7 +468,7 @@ int brcmf_btcoex_set_mode(struct brcmf_c
- {
- 	struct brcmf_cfg80211_info *cfg = wiphy_priv(vif->wdev.wiphy);
- 	struct brcmf_btcoex_info *btci = cfg->btcoex;
--	struct brcmf_if *ifp = cfg->pub->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
- 
- 	switch (mode) {
- 	case BRCMF_BTCOEX_DISABLED:
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6212,7 +6212,7 @@ static void brcmf_free_wiphy(struct wiph
- struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
- 						  struct device *busdev)
- {
--	struct net_device *ndev = drvr->iflist[0]->ndev;
-+	struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
- 	struct brcmf_cfg80211_info *cfg;
- 	struct wiphy *wiphy;
- 	struct brcmf_cfg80211_vif *vif;
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -121,7 +121,7 @@ static void brcmf_feat_iovar_int_set(str
- 
- void brcmf_feat_attach(struct brcmf_pub *drvr)
- {
--	struct brcmf_if *ifp = drvr->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- 
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-@@ -221,7 +221,7 @@ static void brcmf_flowring_block(struct
- 
- 	bus_if = dev_get_drvdata(flow->dev);
- 	drvr = bus_if->drvr;
--	ifp = drvr->iflist[ifidx];
-+	ifp = brcmf_get_ifp(drvr, ifidx);
- 	brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_FLOW, blocked);
- 
- 	spin_unlock_irqrestore(&flow->block_lock, flags);
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -334,7 +334,7 @@ void brcmf_fweh_attach(struct brcmf_pub
- void brcmf_fweh_detach(struct brcmf_pub *drvr)
- {
- 	struct brcmf_fweh_info *fweh = &drvr->fweh;
--	struct brcmf_if *ifp = drvr->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- 	s8 eventmask[BRCMF_EVENTING_MASK_LEN];
- 
- 	if (ifp) {
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -972,7 +972,7 @@ static void
- brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq,
- 			     u8 if_id)
- {
--	struct brcmf_if *ifp = fws->drvr->iflist[!if_id ? 0 : if_id + 1];
-+	struct brcmf_if *ifp = brcmf_get_ifp(fws->drvr, if_id);
- 
- 	if (WARN_ON(!ifp))
- 		return;
-@@ -2118,6 +2118,7 @@ static int brcmf_debugfs_fws_stats_read(
- int brcmf_fws_init(struct brcmf_pub *drvr)
- {
- 	struct brcmf_fws_info *fws;
-+	struct brcmf_if *ifp;
- 	u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS;
- 	int rc;
- 	u32 mode;
-@@ -2177,21 +2178,22 @@ int brcmf_fws_init(struct brcmf_pub *drv
- 	 * continue. Set mode back to none indicating not enabled.
- 	 */
- 	fws->fw_signals = true;
--	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "tlv", tlv)) {
-+	ifp = brcmf_get_ifp(drvr, 0);
-+	if (brcmf_fil_iovar_int_set(ifp, "tlv", tlv)) {
- 		brcmf_err("failed to set bdcv2 tlv signaling\n");
- 		fws->fcmode = BRCMF_FWS_FCMODE_NONE;
- 		fws->fw_signals = false;
- 	}
- 
--	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1))
-+	if (brcmf_fil_iovar_int_set(ifp, "ampdu_hostreorder", 1))
- 		brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n");
- 
- 	/* Enable seq number reuse, if supported */
--	if (brcmf_fil_iovar_int_get(drvr->iflist[0], "wlfc_mode", &mode) == 0) {
-+	if (brcmf_fil_iovar_int_get(ifp, "wlfc_mode", &mode) == 0) {
- 		if (BRCMF_FWS_MODE_GET_REUSESEQ(mode)) {
- 			mode = 0;
- 			BRCMF_FWS_MODE_SET_REUSESEQ(mode, 1);
--			if (brcmf_fil_iovar_int_set(drvr->iflist[0],
-+			if (brcmf_fil_iovar_int_set(ifp,
- 						    "wlfc_mode", mode) == 0) {
- 				BRCMF_FWS_MODE_SET_REUSESEQ(fws->mode, 1);
- 			}
diff --git a/package/kernel/mac80211/patches/365-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch b/package/kernel/mac80211/patches/365-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch
deleted file mode 100644
index 23a7b6f1c8..0000000000
--- a/package/kernel/mac80211/patches/365-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:59 +0200
-Subject: [PATCH] brcmfmac: pass struct brcmf_if instance in
- brcmf_txfinalize()
-
-Most call sites of brcmf_txfinalize already have struct brcmf_if
-instance so pass that to brcmf_txfinalize() as the function
-needs it anyway.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -560,17 +560,11 @@ void brcmf_rx_frame(struct device *dev,
- 		brcmf_netif_rx(ifp, skb);
- }
- 
--void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx,
--		      bool success)
-+void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
- {
--	struct brcmf_if *ifp;
- 	struct ethhdr *eh;
- 	u16 type;
- 
--	ifp = drvr->iflist[ifidx];
--	if (!ifp)
--		goto done;
--
- 	eh = (struct ethhdr *)(txp->data);
- 	type = ntohs(eh->h_proto);
- 
-@@ -582,7 +576,7 @@ void brcmf_txfinalize(struct brcmf_pub *
- 
- 	if (!success)
- 		ifp->stats.tx_errors++;
--done:
-+
- 	brcmu_pkt_buf_free_skb(txp);
- }
- 
-@@ -600,7 +594,7 @@ void brcmf_txcomplete(struct device *dev
- 		if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
- 			brcmu_pkt_buf_free_skb(txp);
- 		else
--			brcmf_txfinalize(drvr, txp, ifp->ifidx, success);
-+			brcmf_txfinalize(ifp, txp, success);
- 	}
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -210,8 +210,7 @@ void brcmf_remove_interface(struct brcmf
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
- void brcmf_txflowblock_if(struct brcmf_if *ifp,
- 			  enum brcmf_netif_stop_reason reason, bool state);
--void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx,
--		      bool success);
-+void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
- void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
- 
- /* Sets dongle media info (drv_version, mac address). */
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1506,7 +1506,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
- 						    genbit, seq);
- 	if (remove_from_hanger || ret)
--		brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true);
-+		brcmf_txfinalize(ifp, skb, true);
- 
- 	return 0;
- }
-@@ -1905,7 +1905,7 @@ int brcmf_fws_process_skb(struct brcmf_i
- 	if (fws->avoid_queueing) {
- 		rc = brcmf_proto_txdata(drvr, ifp->ifidx, 0, skb);
- 		if (rc < 0)
--			brcmf_txfinalize(drvr, skb, ifp->ifidx, false);
-+			brcmf_txfinalize(ifp, skb, false);
- 		return rc;
- 	}
- 
-@@ -1929,7 +1929,7 @@ int brcmf_fws_process_skb(struct brcmf_i
- 		brcmf_fws_schedule_deq(fws);
- 	} else {
- 		brcmf_err("drop skb: no hanger slot\n");
--		brcmf_txfinalize(drvr, skb, ifp->ifidx, false);
-+		brcmf_txfinalize(ifp, skb, false);
- 		rc = -ENOMEM;
- 	}
- 	brcmf_fws_unlock(fws);
-@@ -2009,8 +2009,9 @@ static void brcmf_fws_dequeue_worker(str
- 				ret = brcmf_proto_txdata(drvr, ifidx, 0, skb);
- 				brcmf_fws_lock(fws);
- 				if (ret < 0)
--					brcmf_txfinalize(drvr, skb, ifidx,
--							 false);
-+					brcmf_txfinalize(brcmf_get_ifp(drvr,
-+								       ifidx),
-+							 skb, false);
- 				if (fws->bus_flow_blocked)
- 					break;
- 			}
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -873,7 +873,11 @@ brcmf_msgbuf_process_txstatus(struct brc
- 	commonring = msgbuf->flowrings[flowid];
- 	atomic_dec(&commonring->outstanding_tx);
- 
--	brcmf_txfinalize(msgbuf->drvr, skb, tx_status->msg.ifidx, true);
-+	/* Hante: i believe this was a bug as tx_status->msg.ifidx was used
-+	 * in brcmf_txfinalize as index in drvr->iflist. Can you confirm/deny?
-+	 */
-+	brcmf_txfinalize(brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx),
-+			 skb, true);
- }
- 
- 
diff --git a/package/kernel/mac80211/patches/365-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch b/package/kernel/mac80211/patches/365-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch
deleted file mode 100644
index 8ddc0a6eef..0000000000
--- a/package/kernel/mac80211/patches/365-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:00 +0200
-Subject: [PATCH] brcmfmac: add mapping for interface index to bsscfg
- index
-
-Because the P2P Device interface in firmware uses the same interface
-index as the primary interface we use the bsscfg index as index in the
-struct brcmf_pub::iflist. However, in the data path we get the interface
-index and not the bsscfg index. So we need a mapping of interface index
-to bsscfg index, which can be determined upon handle adding the interface.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -85,21 +85,20 @@ char *brcmf_ifname(struct brcmf_pub *drv
- 
- struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
- {
-+	struct brcmf_if *ifp;
-+	s32 bssidx;
-+
- 	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
- 		brcmf_err("ifidx %d out of range\n", ifidx);
- 		return NULL;
- 	}
- 
--	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
--	 * events this is easy because it contains the bssidx which maps
--	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
--	 * bssidx 1 is used for p2p0 and no data can be received or
--	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
--	 */
--	if (ifidx)
--		ifidx++;
-+	ifp = NULL;
-+	bssidx = drvr->if2bss[ifidx];
-+	if (bssidx >= 0)
-+		ifp = drvr->iflist[bssidx];
- 
--	return drvr->iflist[ifidx];
-+	return ifp;
- }
- 
- static void _brcmf_set_multicast_list(struct work_struct *work)
-@@ -831,6 +830,8 @@ struct brcmf_if *brcmf_add_if(struct brc
- 
- 		ifp = netdev_priv(ndev);
- 		ifp->ndev = ndev;
-+		/* store mapping ifidx to bssidx */
-+		drvr->if2bss[ifidx] = bssidx;
- 	}
- 
- 	ifp->drvr = drvr;
-@@ -855,6 +856,7 @@ static void brcmf_del_if(struct brcmf_pu
- 	struct brcmf_if *ifp;
- 
- 	ifp = drvr->iflist[bssidx];
-+	drvr->if2bss[ifp->ifidx] = -1;
- 	drvr->iflist[bssidx] = NULL;
- 	if (!ifp) {
- 		brcmf_err("Null interface, idx=%d\n", bssidx);
-@@ -862,6 +864,7 @@ static void brcmf_del_if(struct brcmf_pu
- 	}
- 	brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx);
- 	if (ifp->ndev) {
-+		drvr->if2bss[ifp->ifidx] = -1;
- 		if (bssidx == 0) {
- 			if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
- 				rtnl_lock();
-@@ -926,6 +929,7 @@ int brcmf_attach(struct device *dev)
- 	if (!drvr)
- 		return -ENOMEM;
- 
-+	memset(drvr->if2bss, 0xFF, sizeof(drvr->if2bss));
- 	mutex_init(&drvr->proto_block);
- 
- 	/* Link to bus module */
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -122,6 +122,7 @@ struct brcmf_pub {
- 	struct mac_address addresses[BRCMF_MAX_IFS];
- 
- 	struct brcmf_if *iflist[BRCMF_MAX_IFS];
-+	s32 if2bss[BRCMF_MAX_IFS];
- 
- 	struct mutex proto_block;
- 	unsigned char proto_buf[BRCMF_DCMD_MAXLEN];
diff --git a/package/kernel/mac80211/patches/365-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch b/package/kernel/mac80211/patches/365-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch
deleted file mode 100644
index a0a798be93..0000000000
--- a/package/kernel/mac80211/patches/365-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:01 +0200
-Subject: [PATCH] brcmfmac: add dedicated debug level for firmware
- console logging
-
-Both PCIe and SDIO devices have the possibility to log the firmware
-console output in kernel log. For PCIe it is logged when PCIE debug
-level is enabled. For SDIO it is logged when user specifies a non-zero
-console interval through debugfs. This patch tries to make it a
-bit more consistent. The firmware console output is only logged when
-FWCON debug level is enabled.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-@@ -37,6 +37,7 @@
- #define BRCMF_SDIO_VAL		0x00020000
- #define BRCMF_MSGBUF_VAL	0x00040000
- #define BRCMF_PCIE_VAL		0x00080000
-+#define BRCMF_FWCON_VAL		0x00100000
- 
- /* set default print format */
- #undef pr_fmt
-@@ -78,6 +79,7 @@ do {								\
- #define BRCMF_GLOM_ON()		(brcmf_msg_level & BRCMF_GLOM_VAL)
- #define BRCMF_EVENT_ON()	(brcmf_msg_level & BRCMF_EVENT_VAL)
- #define BRCMF_FIL_ON()		(brcmf_msg_level & BRCMF_FIL_VAL)
-+#define BRCMF_FWCON_ON()	(brcmf_msg_level & BRCMF_FWCON_VAL)
- 
- #else /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
- 
-@@ -90,6 +92,7 @@ do {								\
- #define BRCMF_GLOM_ON()		0
- #define BRCMF_EVENT_ON()	0
- #define BRCMF_FIL_ON()		0
-+#define BRCMF_FWCON_ON()	0
- 
- #endif /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -644,7 +644,7 @@ static void brcmf_pcie_bus_console_init(
- 	addr = console->base_addr + BRCMF_CONSOLE_BUFSIZE_OFFSET;
- 	console->bufsize = brcmf_pcie_read_tcm32(devinfo, addr);
- 
--	brcmf_dbg(PCIE, "Console: base %x, buf %x, size %d\n",
-+	brcmf_dbg(FWCON, "Console: base %x, buf %x, size %d\n",
- 		  console->base_addr, console->buf_addr, console->bufsize);
- }
- 
-@@ -656,6 +656,9 @@ static void brcmf_pcie_bus_console_read(
- 	u8 ch;
- 	u32 newidx;
- 
-+	if (!BRCMF_FWCON_ON())
-+		return;
-+
- 	console = &devinfo->shared.console;
- 	addr = console->base_addr + BRCMF_CONSOLE_WRITEIDX_OFFSET;
- 	newidx = brcmf_pcie_read_tcm32(devinfo, addr);
-@@ -677,7 +680,7 @@ static void brcmf_pcie_bus_console_read(
- 		}
- 		if (ch == '\n') {
- 			console->log_str[console->log_idx] = 0;
--			brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str);
-+			pr_debug("CONSOLE: %s", console->log_str);
- 			console->log_idx = 0;
- 		}
- 	}
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -123,6 +123,7 @@ struct rte_console {
- 
- #define BRCMF_FIRSTREAD	(1 << 6)
- 
-+#define BRCMF_CONSOLE	10	/* watchdog interval to poll console */
- 
- /* SBSDIO_DEVICE_CTL */
- 
-@@ -3204,6 +3205,8 @@ static void brcmf_sdio_debugfs_create(st
- 	if (IS_ERR_OR_NULL(dentry))
- 		return;
- 
-+	bus->console_interval = BRCMF_CONSOLE;
-+
- 	brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read);
- 	brcmf_debugfs_add_entry(drvr, "counters",
- 				brcmf_debugfs_sdio_count_read);
-@@ -3613,7 +3616,7 @@ static void brcmf_sdio_bus_watchdog(stru
- 	}
- #ifdef DEBUG
- 	/* Poll for console output periodically */
--	if (bus->sdiodev->state == BRCMF_SDIOD_DATA &&
-+	if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
- 	    bus->console_interval != 0) {
- 		bus->console.count += BRCMF_WD_POLL_MS;
- 		if (bus->console.count >= bus->console_interval) {
diff --git a/package/kernel/mac80211/patches/365-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch b/package/kernel/mac80211/patches/365-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch
deleted file mode 100644
index 53e7edeee7..0000000000
--- a/package/kernel/mac80211/patches/365-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:02 +0200
-Subject: [PATCH] brcmfmac: remove ifidx parameter from
- brcmf_fws_txstatus_suppressed()
-
-The brcmf_fws_txstatus_suppressed() function prototype specifies an
-ifidx parameter which is not used within the function implementation.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1398,7 +1398,7 @@ done:
- }
- 
- static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
--					 struct sk_buff *skb, u8 ifidx,
-+					 struct sk_buff *skb,
- 					 u32 genbit, u16 seq)
- {
- 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
-@@ -1503,7 +1503,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 		return -EINVAL;
- 	}
- 	if (!remove_from_hanger)
--		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
-+		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb,
- 						    genbit, seq);
- 	if (remove_from_hanger || ret)
- 		brcmf_txfinalize(ifp, skb, true);
diff --git a/package/kernel/mac80211/patches/365-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch b/package/kernel/mac80211/patches/365-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch
deleted file mode 100644
index bb05235cf4..0000000000
--- a/package/kernel/mac80211/patches/365-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:03 +0200
-Subject: [PATCH] brcmfmac: change prototype for brcmf_fws_hdrpull()
-
-Instead of passing ifidx and drvr just pass struct brcmf_if pointer
-which holds both parameters.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-@@ -312,8 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 
- 	skb_pull(pktbuf, BCDC_HEADER_LEN);
- 	if (do_fws)
--		brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2,
--				  pktbuf);
-+		brcmf_fws_hdrpull(tmp_if, h->data_offset << 2, pktbuf);
- 	else
- 		skb_pull(pktbuf, h->data_offset << 2);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1616,11 +1616,10 @@ static int brcmf_fws_notify_bcmc_credit_
- 	return 0;
- }
- 
--int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
--		      struct sk_buff *skb)
-+void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb)
- {
- 	struct brcmf_skb_reorder_data *rd;
--	struct brcmf_fws_info *fws = drvr->fws;
-+	struct brcmf_fws_info *fws = ifp->drvr->fws;
- 	u8 *signal_data;
- 	s16 data_len;
- 	u8 type;
-@@ -1630,20 +1629,20 @@ int brcmf_fws_hdrpull(struct brcmf_pub *
- 	s32 err;
- 
- 	brcmf_dbg(HDRS, "enter: ifidx %d, skblen %u, sig %d\n",
--		  ifidx, skb->len, signal_len);
-+		  ifp->ifidx, skb->len, siglen);
- 
--	WARN_ON(signal_len > skb->len);
-+	WARN_ON(siglen > skb->len);
- 
--	if (!signal_len)
--		return 0;
-+	if (!siglen)
-+		return;
- 	/* if flow control disabled, skip to packet data and leave */
- 	if ((!fws) || (!fws->fw_signals)) {
--		skb_pull(skb, signal_len);
--		return 0;
-+		skb_pull(skb, siglen);
-+		return;
- 	}
- 
- 	fws->stats.header_pulls++;
--	data_len = signal_len;
-+	data_len = siglen;
- 	signal_data = skb->data;
- 
- 	status = BRCMF_FWS_RET_OK_NOSCHEDULE;
-@@ -1731,14 +1730,12 @@ int brcmf_fws_hdrpull(struct brcmf_pub *
- 	/* signalling processing result does
- 	 * not affect the actual ethernet packet.
- 	 */
--	skb_pull(skb, signal_len);
-+	skb_pull(skb, siglen);
- 
- 	/* this may be a signal-only packet
- 	 */
- 	if (skb->len == 0)
- 		fws->stats.header_only_pkt++;
--
--	return 0;
- }
- 
- static u8 brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
-@@ -21,8 +21,7 @@
- int brcmf_fws_init(struct brcmf_pub *drvr);
- void brcmf_fws_deinit(struct brcmf_pub *drvr);
- bool brcmf_fws_fc_active(struct brcmf_fws_info *fws);
--int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
--		      struct sk_buff *skb);
-+void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb);
- int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb);
- 
- void brcmf_fws_reset_interface(struct brcmf_if *ifp);
diff --git a/package/kernel/mac80211/patches/365-0012-brcmfmac-introduce-brcmf_net_detach-function.patch b/package/kernel/mac80211/patches/365-0012-brcmfmac-introduce-brcmf_net_detach-function.patch
deleted file mode 100644
index ba92c6749b..0000000000
--- a/package/kernel/mac80211/patches/365-0012-brcmfmac-introduce-brcmf_net_detach-function.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:04 +0200
-Subject: [PATCH] brcmfmac: introduce brcmf_net_detach() function
-
-In case of error during brcmf_bus_start() the network interfaces were
-freed using free_netdev(). However, the interfaces may have additional
-memory allocated which is not freed. The netdev has destructor set to
-brcmf_cfg80211_free_netdev() which frees the additional memory if
-allocated and call free_netdev(). The brcmf_net_detach() either calls
-brcmf_cfg80211_free_netdev() directly or uses unregister_netdev() when
-struct net_device::reg_state indicates the netdev was registered.
-
-Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -4746,7 +4746,8 @@ void brcmf_cfg80211_free_netdev(struct n
- 	ifp = netdev_priv(ndev);
- 	vif = ifp->vif;
- 
--	brcmf_free_vif(vif);
-+	if (vif)
-+		brcmf_free_vif(vif);
- 	free_netdev(ndev);
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -718,8 +718,6 @@ int brcmf_net_attach(struct brcmf_if *if
- 	}
- 
- 	brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name);
--
--	ndev->destructor = brcmf_cfg80211_free_netdev;
- 	return 0;
- 
- fail:
-@@ -729,6 +727,14 @@ fail:
- 	return -EBADE;
- }
- 
-+static void brcmf_net_detach(struct net_device *ndev)
-+{
-+	if (ndev->reg_state == NETREG_REGISTERED)
-+		unregister_netdev(ndev);
-+	else
-+		brcmf_cfg80211_free_netdev(ndev);
-+}
-+
- static int brcmf_net_p2p_open(struct net_device *ndev)
- {
- 	brcmf_dbg(TRACE, "Enter\n");
-@@ -805,8 +811,7 @@ struct brcmf_if *brcmf_add_if(struct brc
- 			  ifp->ndev->name);
- 		if (ifidx) {
- 			netif_stop_queue(ifp->ndev);
--			unregister_netdev(ifp->ndev);
--			free_netdev(ifp->ndev);
-+			brcmf_net_detach(ifp->ndev);
- 			drvr->iflist[bssidx] = NULL;
- 		} else {
- 			brcmf_err("ignore IF event\n");
-@@ -828,6 +833,7 @@ struct brcmf_if *brcmf_add_if(struct brc
- 		if (!ndev)
- 			return ERR_PTR(-ENOMEM);
- 
-+		ndev->destructor = brcmf_cfg80211_free_netdev;
- 		ifp = netdev_priv(ndev);
- 		ifp->ndev = ndev;
- 		/* store mapping ifidx to bssidx */
-@@ -879,8 +885,7 @@ static void brcmf_del_if(struct brcmf_pu
- 			cancel_work_sync(&ifp->setmacaddr_work);
- 			cancel_work_sync(&ifp->multicast_work);
- 		}
--		/* unregister will take care of freeing it */
--		unregister_netdev(ifp->ndev);
-+		brcmf_net_detach(ifp->ndev);
- 	}
- }
- 
-@@ -1056,11 +1061,11 @@ fail:
- 			brcmf_fws_deinit(drvr);
- 		}
- 		if (drvr->iflist[0]) {
--			free_netdev(ifp->ndev);
-+			brcmf_net_detach(ifp->ndev);
- 			drvr->iflist[0] = NULL;
- 		}
- 		if (p2p_ifp) {
--			free_netdev(p2p_ifp->ndev);
-+			brcmf_net_detach(p2p_ifp->ndev);
- 			drvr->iflist[1] = NULL;
- 		}
- 		return ret;
diff --git a/package/kernel/mac80211/patches/366-brcmfmac-Reset-PCIE-devices-after-recognition.patch b/package/kernel/mac80211/patches/366-brcmfmac-Reset-PCIE-devices-after-recognition.patch
deleted file mode 100644
index 5a7e447e25..0000000000
--- a/package/kernel/mac80211/patches/366-brcmfmac-Reset-PCIE-devices-after-recognition.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 27 Aug 2015 16:14:06 +0200
-Subject: [PATCH] brcmfmac: Reset PCIE devices after recognition.
-
-When PCIE type devices are being FW reloaded without being properly
-reset then the device ends up in a locked state, requiring the
-device to be completely powered down. This patch adds a reset
-through watchdog at the moment the device (cores) has been
-recognized. This will solve warm reboot issues.
-
-Cc: Rafal Milecki <zajec5@gmail.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -101,6 +101,9 @@
- /* ARM Cortex M3 core, ID 0x82a */
- #define BCM4329_CORE_ARM_BASE		0x18002000
- 
-+/* Max possibly supported memory size (limited by IO mapped memory) */
-+#define BRCMF_CHIP_MAX_MEMSIZE		(4 * 1024 * 1024)
-+
- #define CORE_SB(base, field) \
- 		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
- #define	SBCOREREV(sbidh) \
-@@ -687,6 +690,12 @@ static int brcmf_chip_get_raminfo(struct
- 		brcmf_err("RAM size is undetermined\n");
- 		return -ENOMEM;
- 	}
-+
-+	if (ci->pub.ramsize > BRCMF_CHIP_MAX_MEMSIZE) {
-+		brcmf_err("RAM size is incorrect\n");
-+		return -ENOMEM;
-+	}
-+
- 	return 0;
- }
- 
-@@ -899,6 +908,15 @@ static int brcmf_chip_recognition(struct
- 
- 	/* assure chip is passive for core access */
- 	brcmf_chip_set_passive(&ci->pub);
-+
-+	/* Call bus specific reset function now. Cores have been determined
-+	 * but further access may require a chip specific reset at this point.
-+	 */
-+	if (ci->ops->reset) {
-+		ci->ops->reset(ci->ctx, &ci->pub);
-+		brcmf_chip_set_passive(&ci->pub);
-+	}
-+
- 	return brcmf_chip_get_raminfo(ci);
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -73,6 +73,7 @@ struct brcmf_buscore_ops {
- 	u32 (*read32)(void *ctx, u32 addr);
- 	void (*write32)(void *ctx, u32 addr, u32 value);
- 	int (*prepare)(void *ctx);
-+	int (*reset)(void *ctx, struct brcmf_chip *chip);
- 	int (*setup)(void *ctx, struct brcmf_chip *chip);
- 	void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -74,6 +74,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_REG_INTMASK			0x94
- #define BRCMF_PCIE_REG_SBMBX			0x98
- 
-+#define BRCMF_PCIE_REG_LINK_STATUS_CTRL		0xBC
-+
- #define BRCMF_PCIE_PCIE2REG_INTMASK		0x24
- #define BRCMF_PCIE_PCIE2REG_MAILBOXINT		0x48
- #define BRCMF_PCIE_PCIE2REG_MAILBOXMASK		0x4C
-@@ -466,6 +468,7 @@ brcmf_pcie_select_core(struct brcmf_pcie
- 
- static void brcmf_pcie_reset_device(struct brcmf_pciedev_info *devinfo)
- {
-+	struct brcmf_core *core;
- 	u16 cfg_offset[] = { BRCMF_PCIE_CFGREG_STATUS_CMD,
- 			     BRCMF_PCIE_CFGREG_PM_CSR,
- 			     BRCMF_PCIE_CFGREG_MSI_CAP,
-@@ -484,32 +487,38 @@ static void brcmf_pcie_reset_device(stru
- 	if (!devinfo->ci)
- 		return;
- 
-+	/* Disable ASPM */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
--			       BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL);
--	lsc = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA);
-+	pci_read_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
-+			      &lsc);
- 	val = lsc & (~BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, val);
-+	pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
-+			       val);
- 
-+	/* Watchdog reset */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_CHIPCOMMON);
- 	WRITECC32(devinfo, watchdog, 4);
- 	msleep(100);
- 
-+	/* Restore ASPM */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
--			       BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, lsc);
-+	pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
-+			       lsc);
- 
--	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) {
--		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
--				       cfg_offset[i]);
--		val = brcmf_pcie_read_reg32(devinfo,
--					    BRCMF_PCIE_PCIE2REG_CONFIGDATA);
--		brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n",
--			  cfg_offset[i], val);
--		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA,
--				       val);
-+	core = brcmf_chip_get_core(devinfo->ci, BCMA_CORE_PCIE2);
-+	if (core->rev <= 13) {
-+		for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) {
-+			brcmf_pcie_write_reg32(devinfo,
-+					       BRCMF_PCIE_PCIE2REG_CONFIGADDR,
-+					       cfg_offset[i]);
-+			val = brcmf_pcie_read_reg32(devinfo,
-+				BRCMF_PCIE_PCIE2REG_CONFIGDATA);
-+			brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n",
-+				  cfg_offset[i], val);
-+			brcmf_pcie_write_reg32(devinfo,
-+					       BRCMF_PCIE_PCIE2REG_CONFIGDATA,
-+					       val);
-+		}
- 	}
- }
- 
-@@ -519,8 +528,6 @@ static void brcmf_pcie_attach(struct brc
- 	u32 config;
- 
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	if (brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_INTMASK) != 0)
--		brcmf_pcie_reset_device(devinfo);
- 	/* BAR1 window may not be sized properly */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
- 	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR, 0x4e0);
-@@ -1636,6 +1643,23 @@ static int brcmf_pcie_buscoreprep(void *
- }
- 
- 
-+static int brcmf_pcie_buscore_reset(void *ctx, struct brcmf_chip *chip)
-+{
-+	struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
-+	u32 val;
-+
-+	devinfo->ci = chip;
-+	brcmf_pcie_reset_device(devinfo);
-+
-+	val = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT);
-+	if (val != 0xffffffff)
-+		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT,
-+				       val);
-+
-+	return 0;
-+}
-+
-+
- static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip,
- 					u32 rstvec)
- {
-@@ -1647,6 +1671,7 @@ static void brcmf_pcie_buscore_activate(
- 
- static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = {
- 	.prepare = brcmf_pcie_buscoreprep,
-+	.reset = brcmf_pcie_buscore_reset,
- 	.activate = brcmf_pcie_buscore_activate,
- 	.read32 = brcmf_pcie_buscore_read32,
- 	.write32 = brcmf_pcie_buscore_write32,
-@@ -1814,7 +1839,6 @@ brcmf_pcie_remove(struct pci_dev *pdev)
- 		brcmf_pcie_intr_disable(devinfo);
- 
- 	brcmf_detach(&pdev->dev);
--	brcmf_pcie_reset_device(devinfo);
- 
- 	kfree(bus->bus_priv.pcie);
- 	kfree(bus->msgbuf->flowrings);
diff --git a/package/kernel/mac80211/patches/367-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch b/package/kernel/mac80211/patches/367-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch
deleted file mode 100644
index f7b3e40b66..0000000000
--- a/package/kernel/mac80211/patches/367-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 13 Sep 2015 22:26:10 +0200
-Subject: [PATCH] ath10k: fix DMA related firmware crashes on multiple devices
-
-Some platforms really don't like DMA bursts of 256 bytes, and this
-causes the firmware to crash when sending beacons.
-Also, changing this based on the firmware version does not seem to make
-much sense, so use 128 bytes for all versions.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath10k/hw.h
-+++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -253,7 +253,7 @@ struct ath10k_pktlog_hdr {
- #define TARGET_10X_MAX_FRAG_ENTRIES		0
- 
- /* 10.2 parameters */
--#define TARGET_10_2_DMA_BURST_SIZE		1
-+#define TARGET_10_2_DMA_BURST_SIZE		0
- 
- /* Target specific defines for WMI-TLV firmware */
- #define TARGET_TLV_NUM_VDEVS			3
diff --git a/package/kernel/mac80211/patches/368-ath9k-declare-required-extra-tx-headroom.patch b/package/kernel/mac80211/patches/368-ath9k-declare-required-extra-tx-headroom.patch
deleted file mode 100644
index c420d20bae..0000000000
--- a/package/kernel/mac80211/patches/368-ath9k-declare-required-extra-tx-headroom.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 24 Sep 2015 16:57:37 +0200
-Subject: [PATCH] ath9k: declare required extra tx headroom
-
-ath9k inserts padding between the 802.11 header and the data area (to
-align it). Since it didn't declare this extra required headroom, this
-led to some nasty issues like randomly dropped packets in some setups.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -867,6 +867,7 @@ static void ath9k_set_hw_capab(struct at
- 	hw->max_rate_tries = 10;
- 	hw->sta_data_size = sizeof(struct ath_node);
- 	hw->vif_data_size = sizeof(struct ath_vif);
-+	hw->extra_tx_headroom = 4;
- 
- 	hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1;
- 	hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1;
diff --git a/package/kernel/mac80211/patches/369-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch b/package/kernel/mac80211/patches/369-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch
deleted file mode 100644
index 1478efae77..0000000000
--- a/package/kernel/mac80211/patches/369-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Mon, 5 Oct 2015 17:41:25 +0200
-Subject: [PATCH] mac80211: initialize tid field in struct ieee80211_txq
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/net/mac80211/util.c
-+++ b/net/mac80211/util.c
-@@ -3323,9 +3323,11 @@ void ieee80211_init_tx_queue(struct ieee
- 	if (sta) {
- 		txqi->txq.sta = &sta->sta;
- 		sta->sta.txq[tid] = &txqi->txq;
-+		txqi->txq.tid = tid;
- 		txqi->txq.ac = ieee802_1d_to_ac[tid & 7];
- 	} else {
- 		sdata->vif.txq = &txqi->txq;
-+		txqi->txq.tid = 0;
- 		txqi->txq.ac = IEEE80211_AC_BE;
- 	}
- }
diff --git a/package/kernel/mac80211/patches/370-0001-brcmfmac-Fix-exception-handling.patch b/package/kernel/mac80211/patches/370-0001-brcmfmac-Fix-exception-handling.patch
deleted file mode 100644
index bcd10314d9..0000000000
--- a/package/kernel/mac80211/patches/370-0001-brcmfmac-Fix-exception-handling.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:04 +0200
-Subject: [PATCH] brcmfmac: Fix exception handling.
-
-In some exception situations the ifp->vif was not properly assigned
-which could result in crash.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6331,6 +6331,7 @@ wiphy_unreg_out:
- priv_out:
- 	wl_deinit_priv(cfg);
- 	brcmf_free_vif(vif);
-+	ifp->vif = NULL;
- wiphy_out:
- 	brcmf_free_wiphy(wiphy);
- 	return NULL;
diff --git a/package/kernel/mac80211/patches/370-0002-brcmfmac-Add-support-for-the-BCM4350-PCIE-device.patch b/package/kernel/mac80211/patches/370-0002-brcmfmac-Add-support-for-the-BCM4350-PCIE-device.patch
deleted file mode 100644
index f4ab77b599..0000000000
--- a/package/kernel/mac80211/patches/370-0002-brcmfmac-Add-support-for-the-BCM4350-PCIE-device.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:05 +0200
-Subject: [PATCH] brcmfmac: Add support for the BCM4350 PCIE device.
-
-This patch adds support fo the BRCM4350 2x2 11ac PCIE device.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -647,6 +647,7 @@ static u32 brcmf_chip_tcm_rambase(struct
- 		return 0x198000;
- 	case BRCM_CC_4335_CHIP_ID:
- 	case BRCM_CC_4339_CHIP_ID:
-+	case BRCM_CC_4350_CHIP_ID:
- 	case BRCM_CC_4354_CHIP_ID:
- 	case BRCM_CC_4356_CHIP_ID:
- 	case BRCM_CC_43567_CHIP_ID:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -47,6 +47,8 @@ enum brcmf_pcie_state {
- 
- #define BRCMF_PCIE_43602_FW_NAME		"brcm/brcmfmac43602-pcie.bin"
- #define BRCMF_PCIE_43602_NVRAM_NAME		"brcm/brcmfmac43602-pcie.txt"
-+#define BRCMF_PCIE_4350_FW_NAME			"brcm/brcmfmac4350-pcie.bin"
-+#define BRCMF_PCIE_4350_NVRAM_NAME		"brcm/brcmfmac4350-pcie.txt"
- #define BRCMF_PCIE_4356_FW_NAME			"brcm/brcmfmac4356-pcie.bin"
- #define BRCMF_PCIE_4356_NVRAM_NAME		"brcm/brcmfmac4356-pcie.txt"
- #define BRCMF_PCIE_43570_FW_NAME		"brcm/brcmfmac43570-pcie.bin"
-@@ -194,6 +196,8 @@ enum brcmf_pcie_state {
- 
- MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4350_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4350_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
-@@ -1418,6 +1422,10 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_43602_FW_NAME;
- 		nvram_name = BRCMF_PCIE_43602_NVRAM_NAME;
- 		break;
-+	case BRCM_CC_4350_CHIP_ID:
-+		fw_name = BRCMF_PCIE_4350_FW_NAME;
-+		nvram_name = BRCMF_PCIE_4350_NVRAM_NAME;
-+		break;
- 	case BRCM_CC_4356_CHIP_ID:
- 		fw_name = BRCMF_PCIE_4356_FW_NAME;
- 		nvram_name = BRCMF_PCIE_4356_NVRAM_NAME;
-@@ -1956,6 +1964,7 @@ cleanup:
- 	PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
- 
- static struct pci_device_id brcmf_pcie_devid_table[] = {
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -39,6 +39,7 @@
- #define BRCM_CC_4339_CHIP_ID		0x4339
- #define BRCM_CC_43430_CHIP_ID		43430
- #define BRCM_CC_4345_CHIP_ID		0x4345
-+#define BRCM_CC_4350_CHIP_ID		0x4350
- #define BRCM_CC_4354_CHIP_ID		0x4354
- #define BRCM_CC_4356_CHIP_ID		0x4356
- #define BRCM_CC_43566_CHIP_ID		43566
-@@ -56,6 +57,7 @@
- #define BRCM_USB_BCMFW_DEVICE_ID	0x0bdc
- 
- /* PCIE Device IDs */
-+#define BRCM_PCIE_4350_DEVICE_ID	0x43a3
- #define BRCM_PCIE_4354_DEVICE_ID	0x43df
- #define BRCM_PCIE_4356_DEVICE_ID	0x43ec
- #define BRCM_PCIE_43567_DEVICE_ID	0x43d3
diff --git a/package/kernel/mac80211/patches/370-0003-brcmfmac-Fix-set-and-get-tx-power-functions.patch b/package/kernel/mac80211/patches/370-0003-brcmfmac-Fix-set-and-get-tx-power-functions.patch
deleted file mode 100644
index 62fdd8d745..0000000000
--- a/package/kernel/mac80211/patches/370-0003-brcmfmac-Fix-set-and-get-tx-power-functions.patch
+++ /dev/null
@@ -1,218 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:06 +0200
-Subject: [PATCH] brcmfmac: Fix set and get tx-power functions.
-
-Implementation of tx-power (get and set) related functions are
-still assuming mW interface. This is wrong as functions use dbm
-(or mbm) nowadays. As a result a tx power configuration could
-result in wrong power configuration.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -236,89 +236,6 @@ static int brcmf_roamoff;
- module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR);
- MODULE_PARM_DESC(roamoff, "do not use internal roaming engine");
- 
--/* Quarter dBm units to mW
-- * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153
-- * Table is offset so the last entry is largest mW value that fits in
-- * a u16.
-- */
--
--#define QDBM_OFFSET 153		/* Offset for first entry */
--#define QDBM_TABLE_LEN 40	/* Table size */
--
--/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET.
-- * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2
-- */
--#define QDBM_TABLE_LOW_BOUND 6493	/* Low bound */
--
--/* Largest mW value that will round down to the last table entry,
-- * QDBM_OFFSET + QDBM_TABLE_LEN-1.
-- * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) +
-- * mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2.
-- */
--#define QDBM_TABLE_HIGH_BOUND 64938	/* High bound */
--
--static const u16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = {
--/* qdBm:	+0	+1	+2	+3	+4	+5	+6	+7 */
--/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000,
--/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849,
--/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119,
--/* 177: */ 26607, 28184, 29854, 31623, 33497, 35481, 37584, 39811,
--/* 185: */ 42170, 44668, 47315, 50119, 53088, 56234, 59566, 63096
--};
--
--static u16 brcmf_qdbm_to_mw(u8 qdbm)
--{
--	uint factor = 1;
--	int idx = qdbm - QDBM_OFFSET;
--
--	if (idx >= QDBM_TABLE_LEN)
--		/* clamp to max u16 mW value */
--		return 0xFFFF;
--
--	/* scale the qdBm index up to the range of the table 0-40
--	 * where an offset of 40 qdBm equals a factor of 10 mW.
--	 */
--	while (idx < 0) {
--		idx += 40;
--		factor *= 10;
--	}
--
--	/* return the mW value scaled down to the correct factor of 10,
--	 * adding in factor/2 to get proper rounding.
--	 */
--	return (nqdBm_to_mW_map[idx] + factor / 2) / factor;
--}
--
--static u8 brcmf_mw_to_qdbm(u16 mw)
--{
--	u8 qdbm;
--	int offset;
--	uint mw_uint = mw;
--	uint boundary;
--
--	/* handle boundary case */
--	if (mw_uint <= 1)
--		return 0;
--
--	offset = QDBM_OFFSET;
--
--	/* move mw into the range of the table */
--	while (mw_uint < QDBM_TABLE_LOW_BOUND) {
--		mw_uint *= 10;
--		offset -= 40;
--	}
--
--	for (qdbm = 0; qdbm < QDBM_TABLE_LEN - 1; qdbm++) {
--		boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm + 1] -
--						    nqdBm_to_mW_map[qdbm]) / 2;
--		if (mw_uint < boundary)
--			break;
--	}
--
--	qdbm += (u8) offset;
--
--	return qdbm;
--}
- 
- static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
- 			       struct cfg80211_chan_def *ch)
-@@ -2016,16 +1933,14 @@ static s32
- brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
- 			    enum nl80211_tx_power_setting type, s32 mbm)
- {
--
- 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- 	struct net_device *ndev = cfg_to_ndev(cfg);
- 	struct brcmf_if *ifp = netdev_priv(ndev);
--	u16 txpwrmw;
--	s32 err = 0;
--	s32 disable = 0;
--	s32 dbm = MBM_TO_DBM(mbm);
-+	s32 err;
-+	s32 disable;
-+	u32 qdbm = 127;
- 
--	brcmf_dbg(TRACE, "Enter\n");
-+	brcmf_dbg(TRACE, "Enter %d %d\n", type, mbm);
- 	if (!check_vif_up(ifp->vif))
- 		return -EIO;
- 
-@@ -2034,12 +1949,20 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- 		break;
- 	case NL80211_TX_POWER_LIMITED:
- 	case NL80211_TX_POWER_FIXED:
--		if (dbm < 0) {
-+		if (mbm < 0) {
- 			brcmf_err("TX_POWER_FIXED - dbm is negative\n");
- 			err = -EINVAL;
- 			goto done;
- 		}
-+		qdbm =  MBM_TO_DBM(4 * mbm);
-+		if (qdbm > 127)
-+			qdbm = 127;
-+		qdbm |= WL_TXPWR_OVERRIDE;
- 		break;
-+	default:
-+		brcmf_err("Unsupported type %d\n", type);
-+		err = -EINVAL;
-+		goto done;
- 	}
- 	/* Make sure radio is off or on as far as software is concerned */
- 	disable = WL_RADIO_SW_DISABLE << 16;
-@@ -2047,52 +1970,44 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- 	if (err)
- 		brcmf_err("WLC_SET_RADIO error (%d)\n", err);
- 
--	if (dbm > 0xffff)
--		txpwrmw = 0xffff;
--	else
--		txpwrmw = (u16) dbm;
--	err = brcmf_fil_iovar_int_set(ifp, "qtxpower",
--				      (s32)brcmf_mw_to_qdbm(txpwrmw));
-+	err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm);
- 	if (err)
- 		brcmf_err("qtxpower error (%d)\n", err);
--	cfg->conf->tx_power = dbm;
- 
- done:
--	brcmf_dbg(TRACE, "Exit\n");
-+	brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE);
- 	return err;
- }
- 
--static s32 brcmf_cfg80211_get_tx_power(struct wiphy *wiphy,
--				       struct wireless_dev *wdev,
--				       s32 *dbm)
-+static s32
-+brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
-+			    s32 *dbm)
- {
- 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
--	struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
--	s32 txpwrdbm;
--	u8 result;
--	s32 err = 0;
-+	struct net_device *ndev = cfg_to_ndev(cfg);
-+	struct brcmf_if *ifp = netdev_priv(ndev);
-+	s32 qdbm = 0;
-+	s32 err;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
- 	if (!check_vif_up(ifp->vif))
- 		return -EIO;
- 
--	err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &txpwrdbm);
-+	err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &qdbm);
- 	if (err) {
- 		brcmf_err("error (%d)\n", err);
- 		goto done;
- 	}
--
--	result = (u8) (txpwrdbm & ~WL_TXPWR_OVERRIDE);
--	*dbm = (s32) brcmf_qdbm_to_mw(result);
-+	*dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4;
- 
- done:
--	brcmf_dbg(TRACE, "Exit\n");
-+	brcmf_dbg(TRACE, "Exit (0x%x %d)\n", qdbm, *dbm);
- 	return err;
- }
- 
- static s32
- brcmf_cfg80211_config_default_key(struct wiphy *wiphy, struct net_device *ndev,
--			       u8 key_idx, bool unicast, bool multicast)
-+				  u8 key_idx, bool unicast, bool multicast)
- {
- 	struct brcmf_if *ifp = netdev_priv(ndev);
- 	u32 index;
diff --git a/package/kernel/mac80211/patches/370-0004-brcmfmac-Only-assign-primary-netdev-to-if2bss-array.patch b/package/kernel/mac80211/patches/370-0004-brcmfmac-Only-assign-primary-netdev-to-if2bss-array.patch
deleted file mode 100644
index c51365fe29..0000000000
--- a/package/kernel/mac80211/patches/370-0004-brcmfmac-Only-assign-primary-netdev-to-if2bss-array.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:07 +0200
-Subject: [PATCH] brcmfmac: Only assign primary netdev to if2bss array.
-
-The if2bss allows for translation of ifidx to bssidx which has a 1:n
-relation. Therefor only the first (primary) netdev should be
-assigned in this array. This fixes the p2pon=1 module param usage.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -53,6 +53,8 @@ MODULE_LICENSE("Dual BSD/GPL");
- #define BRCMF_RXREORDER_EXPIDX_VALID		0x08
- #define BRCMF_RXREORDER_NEW_HOLE		0x10
- 
-+#define BRCMF_BSSIDX_INVALID			-1
-+
- /* Error bits */
- int brcmf_msg_level;
- module_param_named(debug, brcmf_msg_level, int, S_IRUSR | S_IWUSR);
-@@ -837,7 +839,8 @@ struct brcmf_if *brcmf_add_if(struct brc
- 		ifp = netdev_priv(ndev);
- 		ifp->ndev = ndev;
- 		/* store mapping ifidx to bssidx */
--		drvr->if2bss[ifidx] = bssidx;
-+		if (drvr->if2bss[ifidx] == BRCMF_BSSIDX_INVALID)
-+			drvr->if2bss[ifidx] = bssidx;
- 	}
- 
- 	ifp->drvr = drvr;
-@@ -862,15 +865,15 @@ static void brcmf_del_if(struct brcmf_pu
- 	struct brcmf_if *ifp;
- 
- 	ifp = drvr->iflist[bssidx];
--	drvr->if2bss[ifp->ifidx] = -1;
- 	drvr->iflist[bssidx] = NULL;
- 	if (!ifp) {
- 		brcmf_err("Null interface, idx=%d\n", bssidx);
- 		return;
- 	}
- 	brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx);
-+	if (drvr->if2bss[ifp->ifidx] == bssidx)
-+		drvr->if2bss[ifp->ifidx] = BRCMF_BSSIDX_INVALID;
- 	if (ifp->ndev) {
--		drvr->if2bss[ifp->ifidx] = -1;
- 		if (bssidx == 0) {
- 			if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
- 				rtnl_lock();
-@@ -926,6 +929,7 @@ int brcmf_attach(struct device *dev)
- {
- 	struct brcmf_pub *drvr = NULL;
- 	int ret = 0;
-+	int i;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
- 
-@@ -934,7 +938,9 @@ int brcmf_attach(struct device *dev)
- 	if (!drvr)
- 		return -ENOMEM;
- 
--	memset(drvr->if2bss, 0xFF, sizeof(drvr->if2bss));
-+	for (i = 0; i < ARRAY_SIZE(drvr->if2bss); i++)
-+		drvr->if2bss[i] = BRCMF_BSSIDX_INVALID;
-+
- 	mutex_init(&drvr->proto_block);
- 
- 	/* Link to bus module */
diff --git a/package/kernel/mac80211/patches/370-0005-brcmfmac-Inform-p2p-module-about-p2pon-through-API.patch b/package/kernel/mac80211/patches/370-0005-brcmfmac-Inform-p2p-module-about-p2pon-through-API.patch
deleted file mode 100644
index 3c1058d0ad..0000000000
--- a/package/kernel/mac80211/patches/370-0005-brcmfmac-Inform-p2p-module-about-p2pon-through-API.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:08 +0200
-Subject: [PATCH] brcmfmac: Inform p2p module about p2pon through API
-
-When the p2pon module param is used then p2p attach will initialize
-p2p device iface in the firmware, but it is doing that by checking
-data. It is cleaner to pass the p2pon information to p2p by API.
-This information is also needed for other patch.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6126,7 +6126,8 @@ static void brcmf_free_wiphy(struct wiph
- }
- 
- struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
--						  struct device *busdev)
-+						  struct device *busdev,
-+						  bool p2pdev_forced)
- {
- 	struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
- 	struct brcmf_cfg80211_info *cfg;
-@@ -6218,7 +6219,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- 			*cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- 	}
- 
--	err = brcmf_p2p_attach(cfg);
-+	err = brcmf_p2p_attach(cfg, p2pdev_forced);
- 	if (err) {
- 		brcmf_err("P2P initilisation failed (%d)\n", err);
- 		goto wiphy_unreg_out;
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-@@ -469,7 +469,8 @@ brcmf_cfg80211_connect_info *cfg_to_conn
- }
- 
- struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
--						  struct device *busdev);
-+						  struct device *busdev,
-+						  bool p2pdev_forced);
- void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg);
- s32 brcmf_cfg80211_up(struct net_device *ndev);
- s32 brcmf_cfg80211_down(struct net_device *ndev);
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1044,7 +1044,8 @@ int brcmf_bus_start(struct device *dev)
- 
- 	brcmf_fws_add_interface(ifp);
- 
--	drvr->config = brcmf_cfg80211_attach(drvr, bus_if->dev);
-+	drvr->config = brcmf_cfg80211_attach(drvr, bus_if->dev,
-+					     brcmf_p2p_enable);
- 	if (drvr->config == NULL) {
- 		ret = -ENOMEM;
- 		goto fail;
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2333,7 +2333,7 @@ void brcmf_p2p_stop_device(struct wiphy
-  *
-  * @cfg: driver private data for cfg80211 interface.
-  */
--s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg)
-+s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced)
- {
- 	struct brcmf_if *pri_ifp;
- 	struct brcmf_if *p2p_ifp;
-@@ -2348,11 +2348,15 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802
- 
- 	drvr = cfg->pub;
- 
--	pri_ifp = drvr->iflist[0];
--	p2p_ifp = drvr->iflist[1];
--
-+	pri_ifp = brcmf_get_ifp(drvr, 0);
- 	p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif;
- 
-+	if (p2pdev_forced) {
-+		p2p_ifp = drvr->iflist[1];
-+	} else {
-+		p2p_ifp = NULL;
-+		p2p->p2pdev_dynamically = true;
-+	}
- 	if (p2p_ifp) {
- 		p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE,
- 					  false);
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
-@@ -124,6 +124,7 @@ struct afx_hdl {
-  * @wait_next_af: thread synchronizing struct.
-  * @gon_req_action: about to send go negotiation requets frame.
-  * @block_gon_req_tx: drop tx go negotiation requets frame.
-+ * @p2pdev_dynamically: is p2p device if created by module param or supplicant.
-  */
- struct brcmf_p2p_info {
- 	struct brcmf_cfg80211_info *cfg;
-@@ -144,9 +145,10 @@ struct brcmf_p2p_info {
- 	struct completion wait_next_af;
- 	bool gon_req_action;
- 	bool block_gon_req_tx;
-+	bool p2pdev_dynamically;
- };
- 
--s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg);
-+s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced);
- void brcmf_p2p_detach(struct brcmf_p2p_info *p2p);
- struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
- 				       enum nl80211_iftype type, u32 *flags,
diff --git a/package/kernel/mac80211/patches/370-0006-brcmfmac-Fix-bug-in-flowring-management.patch b/package/kernel/mac80211/patches/370-0006-brcmfmac-Fix-bug-in-flowring-management.patch
deleted file mode 100644
index 66b2117693..0000000000
--- a/package/kernel/mac80211/patches/370-0006-brcmfmac-Fix-bug-in-flowring-management.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:09 +0200
-Subject: [PATCH] brcmfmac: Fix bug in flowring management.
-
-The hash index stored in the flowrings is of type u16 but gets
-stored in u8. This can result in incorrect indexing and possibly
-result in crashes. This patch fixes the type.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-@@ -34,7 +34,7 @@ enum ring_status {
- };
- 
- struct brcmf_flowring_ring {
--	u8 hash_id;
-+	u16 hash_id;
- 	bool blocked;
- 	enum ring_status status;
- 	struct sk_buff_head skblist;
diff --git a/package/kernel/mac80211/patches/370-0007-brcmfmac-Make-p2pon-module-param-always-available.patch b/package/kernel/mac80211/patches/370-0007-brcmfmac-Make-p2pon-module-param-always-available.patch
deleted file mode 100644
index c143c3ba75..0000000000
--- a/package/kernel/mac80211/patches/370-0007-brcmfmac-Make-p2pon-module-param-always-available.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:10 +0200
-Subject: [PATCH] brcmfmac: Make p2pon module param always available.
-
-p2pon module param is currently under define BRCMDBG. Though it is
-a needed option for older versions of the wpa_supplicant which do not
-support the P2P_DEVICE interface.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -62,10 +62,8 @@ MODULE_PARM_DESC(debug, "level of debug
- 
- /* P2P0 enable */
- static int brcmf_p2p_enable;
--#ifdef CPTCFG_BRCMDBG
- module_param_named(p2pon, brcmf_p2p_enable, int, 0);
--MODULE_PARM_DESC(p2pon, "enable p2p management functionality");
--#endif
-+MODULE_PARM_DESC(p2pon, "enable legacy p2p management functionality");
- 
- char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx)
- {
diff --git a/package/kernel/mac80211/patches/370-0008-brcmfmac-Workaround-in-change-vif-for-wpa_supplicant.patch b/package/kernel/mac80211/patches/370-0008-brcmfmac-Workaround-in-change-vif-for-wpa_supplicant.patch
deleted file mode 100644
index 15ac2d900a..0000000000
--- a/package/kernel/mac80211/patches/370-0008-brcmfmac-Workaround-in-change-vif-for-wpa_supplicant.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:11 +0200
-Subject: [PATCH] brcmfmac: Workaround in change vif for wpa_supplicant
- support.
-
-Different wpa_supplicants have different behavior and expectations
-regarding the change_virtual_intf behavior. This patch implements
-a workaround for the different versions and possible brcmfmac
-configuration.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -776,6 +776,37 @@ brcmf_cfg80211_change_iface(struct wiphy
- 	s32 err = 0;
- 
- 	brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type);
-+
-+	/* WAR: There are a number of p2p interface related problems which
-+	 * need to be handled initially (before doing the validate).
-+	 * wpa_supplicant tends to do iface changes on p2p device/client/go
-+	 * which are not always possible/allowed. However we need to return
-+	 * OK otherwise the wpa_supplicant wont start. The situation differs
-+	 * on configuration and setup (p2pon=1 module param). The first check
-+	 * is to see if the request is a change to station for p2p iface.
-+	 */
-+	if ((type == NL80211_IFTYPE_STATION) &&
-+	    ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) ||
-+	     (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) ||
-+	     (vif->wdev.iftype == NL80211_IFTYPE_P2P_DEVICE))) {
-+		brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n");
-+		/* Now depending on whether module param p2pon=1 was used the
-+		 * response needs to be either 0 or EOPNOTSUPP. The reason is
-+		 * that if p2pon=1 is used, but a newer supplicant is used then
-+		 * we should return an error, as this combination wont work.
-+		 * In other situations 0 is returned and supplicant will start
-+		 * normally. It will give a trace in cfg80211, but it is the
-+		 * only way to get it working. Unfortunately this will result
-+		 * in situation where we wont support new supplicant in
-+		 * combination with module param p2pon=1, but that is the way
-+		 * it is. If the user tries this then unloading of driver might
-+		 * fail/lock.
-+		 */
-+		if (cfg->p2p.p2pdev_dynamically)
-+			return -EOPNOTSUPP;
-+		else
-+			return 0;
-+	}
- 	err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
- 	if (err) {
- 		brcmf_err("iface validation failed: err=%d\n", err);
-@@ -791,18 +822,6 @@ brcmf_cfg80211_change_iface(struct wiphy
- 		infra = 0;
- 		break;
- 	case NL80211_IFTYPE_STATION:
--		/* Ignore change for p2p IF. Unclear why supplicant does this */
--		if ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) ||
--		    (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO)) {
--			brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n");
--			/* WAR: It is unexpected to get a change of VIF for P2P
--			 * IF, but it happens. The request can not be handled
--			 * but returning EPERM causes a crash. Returning 0
--			 * without setting ieee80211_ptr->iftype causes trace
--			 * (WARN_ON) but it works with wpa_supplicant
--			 */
--			return 0;
--		}
- 		infra = 1;
- 		break;
- 	case NL80211_IFTYPE_AP:
diff --git a/package/kernel/mac80211/patches/370-0009-brcmfmac-Deleting-of-p2p-device-is-leaking-memory.patch b/package/kernel/mac80211/patches/370-0009-brcmfmac-Deleting-of-p2p-device-is-leaking-memory.patch
deleted file mode 100644
index 1988b5cb6b..0000000000
--- a/package/kernel/mac80211/patches/370-0009-brcmfmac-Deleting-of-p2p-device-is-leaking-memory.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:12 +0200
-Subject: [PATCH] brcmfmac: Deleting of p2p device is leaking memory.
-
-When a p2p device gets deleted, the memory for the vif is not being
-released. This is solved by reorganizing the cleanup path and
-properly freeing the memory.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -887,6 +887,16 @@ static void brcmf_del_if(struct brcmf_pu
- 			cancel_work_sync(&ifp->multicast_work);
- 		}
- 		brcmf_net_detach(ifp->ndev);
-+	} else {
-+		/* Only p2p device interfaces which get dynamically created
-+		 * end up here. In this case the p2p module should be informed
-+		 * about the removal of the interface within the firmware. If
-+		 * not then p2p commands towards the firmware will cause some
-+		 * serious troublesome side effects. The p2p module will clean
-+		 * up the ifp if needed.
-+		 */
-+		brcmf_p2p_ifp_removed(ifp);
-+		kfree(ifp);
- 	}
- }
- 
-@@ -894,7 +904,8 @@ void brcmf_remove_interface(struct brcmf
- {
- 	if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp))
- 		return;
--
-+	brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", ifp->bssidx,
-+		  ifp->ifidx);
- 	brcmf_fws_del_interface(ifp);
- 	brcmf_del_if(ifp->drvr, ifp->bssidx);
- }
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2131,20 +2131,6 @@ fail:
- }
- 
- /**
-- * brcmf_p2p_delete_p2pdev() - delete P2P_DEVICE virtual interface.
-- *
-- * @vif: virtual interface object to delete.
-- */
--static void brcmf_p2p_delete_p2pdev(struct brcmf_p2p_info *p2p,
--				    struct brcmf_cfg80211_vif *vif)
--{
--	cfg80211_unregister_wdev(&vif->wdev);
--	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
--	brcmf_remove_interface(vif->ifp);
--	brcmf_free_vif(vif);
--}
--
--/**
-  * brcmf_p2p_add_vif() - create a new P2P virtual interface.
-  *
-  * @wiphy: wiphy device of new interface.
-@@ -2264,9 +2250,11 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 		break;
- 
- 	case NL80211_IFTYPE_P2P_DEVICE:
-+		if (!p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
-+			return 0;
- 		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
- 		brcmf_p2p_deinit_discovery(p2p);
--		brcmf_p2p_delete_p2pdev(p2p, vif);
-+		brcmf_remove_interface(vif->ifp);
- 		return 0;
- 	default:
- 		return -ENOTSUPP;
-@@ -2298,6 +2286,21 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 	return err;
- }
- 
-+void brcmf_p2p_ifp_removed(struct brcmf_if *ifp)
-+{
-+	struct brcmf_cfg80211_info *cfg;
-+	struct brcmf_cfg80211_vif *vif;
-+
-+	brcmf_dbg(INFO, "P2P: device interface removed\n");
-+	vif = ifp->vif;
-+	cfg = wdev_to_cfg(&vif->wdev);
-+	cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
-+	rtnl_lock();
-+	cfg80211_unregister_wdev(&vif->wdev);
-+	rtnl_unlock();
-+	brcmf_free_vif(vif);
-+}
-+
- int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev)
- {
- 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-@@ -2422,10 +2425,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_i
- 	if (vif != NULL) {
- 		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
- 		brcmf_p2p_deinit_discovery(p2p);
--		/* remove discovery interface */
--		rtnl_lock();
--		brcmf_p2p_delete_p2pdev(p2p, vif);
--		rtnl_unlock();
-+		brcmf_remove_interface(vif->ifp);
- 	}
- 	/* just set it all to zero */
- 	memset(p2p, 0, sizeof(*p2p));
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
-@@ -156,6 +156,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s
- int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev);
- int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg,
- 		       enum brcmf_fil_p2p_if_types if_type);
-+void brcmf_p2p_ifp_removed(struct brcmf_if *ifp);
- int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev);
- void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev);
- int brcmf_p2p_scan_prep(struct wiphy *wiphy,
diff --git a/package/kernel/mac80211/patches/370-0010-brcmfmac-Only-handle-p2p_stop_device-if-vif-is-valid.patch b/package/kernel/mac80211/patches/370-0010-brcmfmac-Only-handle-p2p_stop_device-if-vif-is-valid.patch
deleted file mode 100644
index 5225c9e5bc..0000000000
--- a/package/kernel/mac80211/patches/370-0010-brcmfmac-Only-handle-p2p_stop_device-if-vif-is-valid.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:13 +0200
-Subject: [PATCH] brcmfmac: Only handle p2p_stop_device if vif is valid
-
-In some situations it is possible that vif has been removed while
-cfg80211 invokes the p2p_stop_device handler. This will result in
-crash.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2324,11 +2324,17 @@ void brcmf_p2p_stop_device(struct wiphy
- 	struct brcmf_cfg80211_vif *vif;
- 
- 	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
--	mutex_lock(&cfg->usr_sync);
--	(void)brcmf_p2p_deinit_discovery(p2p);
--	brcmf_abort_scanning(cfg);
--	clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state);
--	mutex_unlock(&cfg->usr_sync);
-+	/* This call can be result of the unregister_wdev call. In that case
-+	 * we dont want to do anything anymore. Just return. The config vif
-+	 * will have been cleared at this point.
-+	 */
-+	if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif == vif) {
-+		mutex_lock(&cfg->usr_sync);
-+		(void)brcmf_p2p_deinit_discovery(p2p);
-+		brcmf_abort_scanning(cfg);
-+		clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state);
-+		mutex_unlock(&cfg->usr_sync);
-+	}
- }
- 
- /**
diff --git a/package/kernel/mac80211/patches/370-0011-brcmfmac-Fix-p2p-bug-for-older-firmwares.patch b/package/kernel/mac80211/patches/370-0011-brcmfmac-Fix-p2p-bug-for-older-firmwares.patch
deleted file mode 100644
index e2f24e866b..0000000000
--- a/package/kernel/mac80211/patches/370-0011-brcmfmac-Fix-p2p-bug-for-older-firmwares.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:14 +0200
-Subject: [PATCH] brcmfmac: Fix p2p bug for older firmwares.
-
-Some devices with older firmwares are reporting new p2p device
-interface with the wrong type. Accept this type to get p2p
-working for these devices.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -186,11 +186,13 @@ static void brcmf_fweh_handle_if_event(s
- 		  ifevent->action, ifevent->ifidx, ifevent->bssidx,
- 		  ifevent->flags, ifevent->role);
- 
--	/* The P2P Device interface event must not be ignored
--	 * contrary to what firmware tells us.
-+	/* The P2P Device interface event must not be ignored contrary to what
-+	 * firmware tells us. Older firmware uses p2p noif, with sta role.
-+	 * This should be accepted.
- 	 */
--	is_p2pdev = (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) &&
--		    ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT;
-+	is_p2pdev = ((ifevent->flags & BRCMF_E_IF_FLAG_NOIF) &&
-+		     (ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT ||
-+		      ifevent->role == BRCMF_E_IF_ROLE_STA));
- 	if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
- 		brcmf_dbg(EVENT, "event can be ignored\n");
- 		return;
diff --git a/package/kernel/mac80211/patches/370-0012-brcmfmac-Add-module-parameter-to-disable-features.patch b/package/kernel/mac80211/patches/370-0012-brcmfmac-Add-module-parameter-to-disable-features.patch
deleted file mode 100644
index 52c787ff61..0000000000
--- a/package/kernel/mac80211/patches/370-0012-brcmfmac-Add-module-parameter-to-disable-features.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:15 +0200
-Subject: [PATCH] brcmfmac: Add module parameter to disable features.
-
-For debugging purpose it is very handy to be able to disable
-features. It has happened a few times that new features turned
-out not always being properly detected for all devices/firmwares.
-Making it possible to disable the feature with a module parameter
-will make testing/debugging easier.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -15,6 +15,7 @@
-  */
- 
- #include <linux/netdevice.h>
-+#include <linux/module.h>
- 
- #include <brcm_hw_ids.h>
- #include "core.h"
-@@ -23,6 +24,12 @@
- #include "fwil.h"
- #include "feature.h"
- 
-+
-+/* Module param feature_disable (global for all devices) */
-+static int brcmf_feature_disable;
-+module_param_named(feature_disable, brcmf_feature_disable, int, 0);
-+MODULE_PARM_DESC(feature_disable, "Disable features");
-+
- /*
-  * expand feature list to array of feature strings.
-  */
-@@ -131,6 +138,12 @@ void brcmf_feat_attach(struct brcmf_pub
- 		brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p");
- 
-+	if (brcmf_feature_disable) {
-+		brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
-+			  ifp->drvr->feat_flags, brcmf_feature_disable);
-+		ifp->drvr->feat_flags &= ~brcmf_feature_disable;
-+	}
-+
- 	/* set chip related quirks */
- 	switch (drvr->bus_if->chip) {
- 	case BRCM_CC_43236_CHIP_ID:
diff --git a/package/kernel/mac80211/patches/370-0013-brcmfmac-Fix-race-condition-bug-when-deleting-p2p-in.patch b/package/kernel/mac80211/patches/370-0013-brcmfmac-Fix-race-condition-bug-when-deleting-p2p-in.patch
deleted file mode 100644
index 58a638aa08..0000000000
--- a/package/kernel/mac80211/patches/370-0013-brcmfmac-Fix-race-condition-bug-when-deleting-p2p-in.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:16 +0200
-Subject: [PATCH] brcmfmac: Fix race condition bug when deleting p2p interface.
-
-When p2p device interface gets deleted by deinitialising discovery
-it will result in an event which removes the interface, but that is
-also done by delete p2p interface code. This results in race
-condition which sometimes results in lockup/crash. With this patch
-the delete device interface will wait for the event (with timeout)
-removing the possible race condition. Also on the stop device call
-from cfg80211 the deinitialisation of the discovery device should
-be avoided as it can result in a similar situation.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2238,6 +2238,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 	brcmf_dbg(TRACE, "delete P2P vif\n");
- 	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
- 
-+	brcmf_cfg80211_arm_vif_event(cfg, vif);
- 	switch (vif->wdev.iftype) {
- 	case NL80211_IFTYPE_P2P_CLIENT:
- 		if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state))
-@@ -2254,8 +2255,6 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 			return 0;
- 		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
- 		brcmf_p2p_deinit_discovery(p2p);
--		brcmf_remove_interface(vif->ifp);
--		return 0;
- 	default:
- 		return -ENOTSUPP;
- 	}
-@@ -2267,10 +2266,11 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 		wait_for_completion_timeout(&cfg->vif_disabled,
- 					    msecs_to_jiffies(500));
- 
--	brcmf_vif_clear_mgmt_ies(vif);
--
--	brcmf_cfg80211_arm_vif_event(cfg, vif);
--	err = brcmf_p2p_release_p2p_if(vif);
-+	err = 0;
-+	if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE) {
-+		brcmf_vif_clear_mgmt_ies(vif);
-+		err = brcmf_p2p_release_p2p_if(vif);
-+	}
- 	if (!err) {
- 		/* wait for firmware event */
- 		err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL,
-@@ -2280,8 +2280,12 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 		else
- 			err = 0;
- 	}
-+	if (err)
-+		brcmf_remove_interface(vif->ifp);
-+
- 	brcmf_cfg80211_arm_vif_event(cfg, NULL);
--	p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL;
-+	if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE)
-+		p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL;
- 
- 	return err;
- }
-@@ -2330,7 +2334,9 @@ void brcmf_p2p_stop_device(struct wiphy
- 	 */
- 	if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif == vif) {
- 		mutex_lock(&cfg->usr_sync);
--		(void)brcmf_p2p_deinit_discovery(p2p);
-+		/* Set the discovery state to SCAN */
-+		(void)brcmf_p2p_set_discover_state(vif->ifp,
-+						   WL_P2P_DISC_ST_SCAN, 0, 0);
- 		brcmf_abort_scanning(cfg);
- 		clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state);
- 		mutex_unlock(&cfg->usr_sync);
diff --git a/package/kernel/mac80211/patches/370-0014-brcmfmac-Add-support-for-the-BCM4365-and-BCM4366-PCI.patch b/package/kernel/mac80211/patches/370-0014-brcmfmac-Add-support-for-the-BCM4365-and-BCM4366-PCI.patch
deleted file mode 100644
index d0bbf2a878..0000000000
--- a/package/kernel/mac80211/patches/370-0014-brcmfmac-Add-support-for-the-BCM4365-and-BCM4366-PCI.patch
+++ /dev/null
@@ -1,277 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:17 +0200
-Subject: [PATCH] brcmfmac: Add support for the BCM4365 and BCM4366 PCIE
- devices.
-
-This patch adds support for the BCM4365 and BCM4366 11ac Wave2
-PCIE devices.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -208,6 +208,7 @@ struct sbsocramregs {
- };
- 
- #define SOCRAMREGOFFS(_f)	offsetof(struct sbsocramregs, _f)
-+#define SYSMEMREGOFFS(_f)	offsetof(struct sbsocramregs, _f)
- 
- #define ARMCR4_CAP		(0x04)
- #define ARMCR4_BANKIDX		(0x40)
-@@ -516,6 +517,9 @@ static int brcmf_chip_cores_check(struct
- 		case BCMA_CORE_ARM_CR4:
- 			cpu_found = true;
- 			break;
-+		case BCMA_CORE_ARM_CA7:
-+			cpu_found = true;
-+			break;
- 		default:
- 			break;
- 		}
-@@ -614,6 +618,29 @@ static void brcmf_chip_socram_ramsize(st
- 	}
- }
- 
-+/** Return the SYS MEM size */
-+static u32 brcmf_chip_sysmem_ramsize(struct brcmf_core_priv *sysmem)
-+{
-+	u32 memsize = 0;
-+	u32 coreinfo;
-+	u32 idx;
-+	u32 nb;
-+	u32 banksize;
-+
-+	if (!brcmf_chip_iscoreup(&sysmem->pub))
-+		brcmf_chip_resetcore(&sysmem->pub, 0, 0, 0);
-+
-+	coreinfo = brcmf_chip_core_read32(sysmem, SYSMEMREGOFFS(coreinfo));
-+	nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+
-+	for (idx = 0; idx < nb; idx++) {
-+		brcmf_chip_socram_banksize(sysmem, idx, &banksize);
-+		memsize += banksize;
-+	}
-+
-+	return memsize;
-+}
-+
- /** Return the TCM-RAM size of the ARMCR4 core. */
- static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4)
- {
-@@ -656,6 +683,9 @@ static u32 brcmf_chip_tcm_rambase(struct
- 	case BRCM_CC_4358_CHIP_ID:
- 	case BRCM_CC_43602_CHIP_ID:
- 		return 0x180000;
-+	case BRCM_CC_4365_CHIP_ID:
-+	case BRCM_CC_4366_CHIP_ID:
-+		return 0x200000;
- 	default:
- 		brcmf_err("unknown chip: %s\n", ci->pub.name);
- 		break;
-@@ -678,10 +708,28 @@ static int brcmf_chip_get_raminfo(struct
- 			return -EINVAL;
- 		}
- 	} else {
--		mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_INTERNAL_MEM);
--		mem_core = container_of(mem, struct brcmf_core_priv, pub);
--		brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize,
--					  &ci->pub.srsize);
-+		mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_SYS_MEM);
-+		if (mem) {
-+			mem_core = container_of(mem, struct brcmf_core_priv,
-+						pub);
-+			ci->pub.ramsize = brcmf_chip_sysmem_ramsize(mem_core);
-+			ci->pub.rambase = brcmf_chip_tcm_rambase(ci);
-+			if (!ci->pub.rambase) {
-+				brcmf_err("RAM base not provided with ARM CA7 core\n");
-+				return -EINVAL;
-+			}
-+		} else {
-+			mem = brcmf_chip_get_core(&ci->pub,
-+						  BCMA_CORE_INTERNAL_MEM);
-+			if (!mem) {
-+				brcmf_err("No memory cores found\n");
-+				return -ENOMEM;
-+			}
-+			mem_core = container_of(mem, struct brcmf_core_priv,
-+						pub);
-+			brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize,
-+						  &ci->pub.srsize);
-+		}
- 	}
- 	brcmf_dbg(INFO, "RAM: base=0x%x size=%d (0x%x) sr=%d (0x%x)\n",
- 		  ci->pub.rambase, ci->pub.ramsize, ci->pub.ramsize,
-@@ -924,7 +972,7 @@ static int brcmf_chip_recognition(struct
- static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id)
- {
- 	struct brcmf_core *core;
--	struct brcmf_core_priv *cr4;
-+	struct brcmf_core_priv *cpu;
- 	u32 val;
- 
- 
-@@ -937,10 +985,11 @@ static void brcmf_chip_disable_arm(struc
- 		brcmf_chip_coredisable(core, 0, 0);
- 		break;
- 	case BCMA_CORE_ARM_CR4:
--		cr4 = container_of(core, struct brcmf_core_priv, pub);
-+	case BCMA_CORE_ARM_CA7:
-+		cpu = container_of(core, struct brcmf_core_priv, pub);
- 
- 		/* clear all IOCTL bits except HALT bit */
--		val = chip->ops->read32(chip->ctx, cr4->wrapbase + BCMA_IOCTL);
-+		val = chip->ops->read32(chip->ctx, cpu->wrapbase + BCMA_IOCTL);
- 		val &= ARMCR4_BCMA_IOCTL_CPUHALT;
- 		brcmf_chip_resetcore(core, val, ARMCR4_BCMA_IOCTL_CPUHALT,
- 				     ARMCR4_BCMA_IOCTL_CPUHALT);
-@@ -1162,6 +1211,33 @@ static bool brcmf_chip_cr4_set_active(st
- 	return true;
- }
- 
-+static inline void
-+brcmf_chip_ca7_set_passive(struct brcmf_chip_priv *chip)
-+{
-+	struct brcmf_core *core;
-+
-+	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CA7);
-+
-+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
-+	brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET |
-+				   D11_BCMA_IOCTL_PHYCLOCKEN,
-+			     D11_BCMA_IOCTL_PHYCLOCKEN,
-+			     D11_BCMA_IOCTL_PHYCLOCKEN);
-+}
-+
-+static bool brcmf_chip_ca7_set_active(struct brcmf_chip_priv *chip, u32 rstvec)
-+{
-+	struct brcmf_core *core;
-+
-+	chip->ops->activate(chip->ctx, &chip->pub, rstvec);
-+
-+	/* restore ARM */
-+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CA7);
-+	brcmf_chip_resetcore(core, ARMCR4_BCMA_IOCTL_CPUHALT, 0, 0);
-+
-+	return true;
-+}
-+
- void brcmf_chip_set_passive(struct brcmf_chip *pub)
- {
- 	struct brcmf_chip_priv *chip;
-@@ -1175,8 +1251,16 @@ void brcmf_chip_set_passive(struct brcmf
- 		brcmf_chip_cr4_set_passive(chip);
- 		return;
- 	}
--
--	brcmf_chip_cm3_set_passive(chip);
-+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CA7);
-+	if (arm) {
-+		brcmf_chip_ca7_set_passive(chip);
-+		return;
-+	}
-+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3);
-+	if (arm) {
-+		brcmf_chip_cm3_set_passive(chip);
-+		return;
-+	}
- }
- 
- bool brcmf_chip_set_active(struct brcmf_chip *pub, u32 rstvec)
-@@ -1190,8 +1274,14 @@ bool brcmf_chip_set_active(struct brcmf_
- 	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
- 	if (arm)
- 		return brcmf_chip_cr4_set_active(chip, rstvec);
-+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CA7);
-+	if (arm)
-+		return brcmf_chip_ca7_set_active(chip, rstvec);
-+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3);
-+	if (arm)
-+		return brcmf_chip_cm3_set_active(chip);
- 
--	return brcmf_chip_cm3_set_active(chip);
-+	return false;
- }
- 
- bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -55,6 +55,10 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_43570_NVRAM_NAME		"brcm/brcmfmac43570-pcie.txt"
- #define BRCMF_PCIE_4358_FW_NAME			"brcm/brcmfmac4358-pcie.bin"
- #define BRCMF_PCIE_4358_NVRAM_NAME		"brcm/brcmfmac4358-pcie.txt"
-+#define BRCMF_PCIE_4365_FW_NAME			"brcm/brcmfmac4365b-pcie.bin"
-+#define BRCMF_PCIE_4365_NVRAM_NAME		"brcm/brcmfmac4365b-pcie.txt"
-+#define BRCMF_PCIE_4366_FW_NAME			"brcm/brcmfmac4366b-pcie.bin"
-+#define BRCMF_PCIE_4366_NVRAM_NAME		"brcm/brcmfmac4366b-pcie.txt"
- 
- #define BRCMF_PCIE_FW_UP_TIMEOUT		2000 /* msec */
- 
-@@ -204,6 +208,10 @@ MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4366_NVRAM_NAME);
- 
- 
- struct brcmf_pcie_console {
-@@ -1440,6 +1448,14 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_4358_FW_NAME;
- 		nvram_name = BRCMF_PCIE_4358_NVRAM_NAME;
- 		break;
-+	case BRCM_CC_4365_CHIP_ID:
-+		fw_name = BRCMF_PCIE_4365_FW_NAME;
-+		nvram_name = BRCMF_PCIE_4365_NVRAM_NAME;
-+		break;
-+	case BRCM_CC_4366_CHIP_ID:
-+		fw_name = BRCMF_PCIE_4366_FW_NAME;
-+		nvram_name = BRCMF_PCIE_4366_NVRAM_NAME;
-+		break;
- 	default:
- 		brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip);
- 		return -ENODEV;
-@@ -1973,6 +1989,12 @@ static struct pci_device_id brcmf_pcie_d
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_RAW_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_2G_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_5G_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID),
- 	{ /* end: all zeroes */ }
- };
- 
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -48,6 +48,8 @@
- #define BRCM_CC_43570_CHIP_ID		43570
- #define BRCM_CC_4358_CHIP_ID		0x4358
- #define BRCM_CC_43602_CHIP_ID		43602
-+#define BRCM_CC_4365_CHIP_ID		0x4365
-+#define BRCM_CC_4366_CHIP_ID		0x4366
- 
- /* USB Device IDs */
- #define BRCM_USB_43143_DEVICE_ID	0xbd1e
-@@ -67,6 +69,13 @@
- #define BRCM_PCIE_43602_2G_DEVICE_ID	0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID	0x43bc
- #define BRCM_PCIE_43602_RAW_DEVICE_ID	43602
-+#define BRCM_PCIE_4365_DEVICE_ID	0x43ca
-+#define BRCM_PCIE_4365_2G_DEVICE_ID	0x43cb
-+#define BRCM_PCIE_4365_5G_DEVICE_ID	0x43cc
-+#define BRCM_PCIE_4366_DEVICE_ID	0x43c3
-+#define BRCM_PCIE_4366_2G_DEVICE_ID	0x43c4
-+#define BRCM_PCIE_4366_5G_DEVICE_ID	0x43c5
-+
- 
- /* brcmsmac IDs */
- #define BCM4313_D11N2G_ID	0x4727	/* 4313 802.11n 2.4G device */
diff --git a/package/kernel/mac80211/patches/370-0015-brcmfmac-Fix-TDLS-setup-by-properly-handling-p2p-noi.patch b/package/kernel/mac80211/patches/370-0015-brcmfmac-Fix-TDLS-setup-by-properly-handling-p2p-noi.patch
deleted file mode 100644
index d33c803ab5..0000000000
--- a/package/kernel/mac80211/patches/370-0015-brcmfmac-Fix-TDLS-setup-by-properly-handling-p2p-noi.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:18 +0200
-Subject: [PATCH] brcmfmac: Fix TDLS setup by properly handling p2p noif.
-
-There is a workaround needed for p2p device setup which breaks tdls
-functionality. This patch fixes that by properly signalling fweh that
-p2p device setup is ongoing.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -188,11 +188,13 @@ static void brcmf_fweh_handle_if_event(s
- 
- 	/* The P2P Device interface event must not be ignored contrary to what
- 	 * firmware tells us. Older firmware uses p2p noif, with sta role.
--	 * This should be accepted.
-+	 * This should be accepted when p2pdev_setup is ongoing. TDLS setup will
-+	 * use the same ifevent and should be ignored.
- 	 */
- 	is_p2pdev = ((ifevent->flags & BRCMF_E_IF_FLAG_NOIF) &&
- 		     (ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT ||
--		      ifevent->role == BRCMF_E_IF_ROLE_STA));
-+		      ((ifevent->role == BRCMF_E_IF_ROLE_STA) &&
-+		       (drvr->fweh.p2pdev_setup_ongoing))));
- 	if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
- 		brcmf_dbg(EVENT, "event can be ignored\n");
- 		return;
-@@ -316,6 +318,17 @@ event_free:
- }
- 
- /**
-+ * brcmf_fweh_p2pdev_setup() - P2P device setup ongoing (or not).
-+ *
-+ * @ifp: ifp on which setup is taking place or finished.
-+ * @ongoing: p2p device setup in progress (or not).
-+ */
-+void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing)
-+{
-+	ifp->drvr->fweh.p2pdev_setup_ongoing = ongoing;
-+}
-+
-+/**
-  * brcmf_fweh_attach() - initialize firmware event handling.
-  *
-  * @drvr: driver information object.
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-@@ -230,12 +230,14 @@ typedef int (*brcmf_fweh_handler_t)(stru
- /**
-  * struct brcmf_fweh_info - firmware event handling information.
-  *
-+ * @p2pdev_setup_ongoing: P2P device creation in progress.
-  * @event_work: event worker.
-  * @evt_q_lock: lock for event queue protection.
-  * @event_q: event queue.
-  * @evt_handler: registered event handlers.
-  */
- struct brcmf_fweh_info {
-+	bool p2pdev_setup_ongoing;
- 	struct work_struct event_work;
- 	spinlock_t evt_q_lock;
- 	struct list_head event_q;
-@@ -255,6 +257,7 @@ void brcmf_fweh_unregister(struct brcmf_
- int brcmf_fweh_activate_events(struct brcmf_if *ifp);
- void brcmf_fweh_process_event(struct brcmf_pub *drvr,
- 			      struct brcmf_event *event_packet);
-+void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing);
- 
- static inline void brcmf_fweh_process_skb(struct brcmf_pub *drvr,
- 					  struct sk_buff *skb)
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2084,11 +2084,13 @@ static struct wireless_dev *brcmf_p2p_cr
- 	brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
- 
- 	brcmf_cfg80211_arm_vif_event(p2p->cfg, p2p_vif);
-+	brcmf_fweh_p2pdev_setup(pri_ifp, true);
- 
- 	/* Initialize P2P Discovery in the firmware */
- 	err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
- 	if (err < 0) {
- 		brcmf_err("set p2p_disc error\n");
-+		brcmf_fweh_p2pdev_setup(pri_ifp, false);
- 		brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
- 		goto fail;
- 	}
-@@ -2097,6 +2099,7 @@ static struct wireless_dev *brcmf_p2p_cr
- 	err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD,
- 						    msecs_to_jiffies(1500));
- 	brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
-+	brcmf_fweh_p2pdev_setup(pri_ifp, false);
- 	if (!err) {
- 		brcmf_err("timeout occurred\n");
- 		err = -EIO;
-@@ -2393,6 +2396,8 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802
- 		memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
- 		brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
- 
-+		brcmf_fweh_p2pdev_setup(pri_ifp, true);
-+
- 		/* Initialize P2P Discovery in the firmware */
- 		err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
- 		if (err < 0) {
-@@ -2419,8 +2424,9 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802
- 		INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
- 		init_completion(&p2p->afx_hdl.act_frm_scan);
- 		init_completion(&p2p->wait_next_af);
--	}
- exit:
-+		brcmf_fweh_p2pdev_setup(pri_ifp, false);
-+	}
- 	return err;
- }
- 
diff --git a/package/kernel/mac80211/patches/370-0016-brcmfmac-Accept-events-when-TDLS-is-used-in-combinat.patch b/package/kernel/mac80211/patches/370-0016-brcmfmac-Accept-events-when-TDLS-is-used-in-combinat.patch
deleted file mode 100644
index b880078835..0000000000
--- a/package/kernel/mac80211/patches/370-0016-brcmfmac-Accept-events-when-TDLS-is-used-in-combinat.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 18 Sep 2015 22:08:19 +0200
-Subject: [PATCH] brcmfmac: Accept events when TDLS is used in combination with
- p2p.
-
-TDLS events are mapped back to primary interface but when p2p is in
-use then this fails because the check was incorrect by checking
-bsscfg number. Which can be different when a p2p device has been
-created.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -300,8 +300,7 @@ static void brcmf_fweh_event_worker(stru
- 			goto event_free;
- 		}
- 
--		if ((event->code == BRCMF_E_TDLS_PEER_EVENT) &&
--		    (emsg.bsscfgidx == 1))
-+		if (event->code == BRCMF_E_TDLS_PEER_EVENT)
- 			ifp = drvr->iflist[0];
- 		else
- 			ifp = drvr->iflist[emsg.bsscfgidx];
diff --git a/package/kernel/mac80211/patches/371-brcmfmac-include-linux-atomic.h.patch b/package/kernel/mac80211/patches/371-brcmfmac-include-linux-atomic.h.patch
deleted file mode 100644
index 9311a9dbe4..0000000000
--- a/package/kernel/mac80211/patches/371-brcmfmac-include-linux-atomic.h.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 19 Sep 2015 12:47:20 +0200
-Subject: [PATCH] brcmfmac: include linux/atomic.h
-
-brcmfmac uses atomic_or() and other atomic_* functions, but does not
-include linux/atomic.h. This file gets included by some other header
-file so this normally does not cause problems.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -15,6 +15,7 @@
-  */
- 
- #include <linux/types.h>
-+#include <linux/atomic.h>
- #include <linux/kernel.h>
- #include <linux/kthread.h>
- #include <linux/printk.h>
diff --git a/package/kernel/mac80211/patches/372-0001-brcmfmac-expose-device-memory-to-devcoredump-subsyst.patch b/package/kernel/mac80211/patches/372-0001-brcmfmac-expose-device-memory-to-devcoredump-subsyst.patch
deleted file mode 100644
index cf3f278871..0000000000
--- a/package/kernel/mac80211/patches/372-0001-brcmfmac-expose-device-memory-to-devcoredump-subsyst.patch
+++ /dev/null
@@ -1,347 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:11 +0200
-Subject: [PATCH] brcmfmac: expose device memory to devcoredump subsystem
-
-Upon PSM watchdog event received from firmware the driver will obtain
-a memory snapshot of the device and expose it to user-space through
-the devcoredump framework. This will trigger a uevent.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/Kconfig
-+++ b/drivers/net/wireless/brcm80211/Kconfig
-@@ -85,5 +85,6 @@ config BRCM_TRACING
- config BRCMDBG
- 	bool "Broadcom driver debug functions"
- 	depends on BRCMSMAC || BRCMFMAC
-+	select WANT_DEV_COREDUMP
- 	---help---
- 	  Selecting this enables additional code for debug purposes.
---- a/drivers/net/wireless/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bus.h
-@@ -65,6 +65,8 @@ struct brcmf_bus_dcmd {
-  * @rxctl: receive a control response message from dongle.
-  * @gettxq: obtain a reference of bus transmit queue (optional).
-  * @wowl_config: specify if dongle is configured for wowl when going to suspend
-+ * @get_ramsize: obtain size of device memory.
-+ * @get_memdump: obtain device memory dump in provided buffer.
-  *
-  * This structure provides an abstract interface towards the
-  * bus specific driver. For control messages to common driver
-@@ -79,6 +81,8 @@ struct brcmf_bus_ops {
- 	int (*rxctl)(struct device *dev, unsigned char *msg, uint len);
- 	struct pktq * (*gettxq)(struct device *dev);
- 	void (*wowl_config)(struct device *dev, bool enabled);
-+	size_t (*get_ramsize)(struct device *dev);
-+	int (*get_memdump)(struct device *dev, void *data, size_t len);
- };
- 
- 
-@@ -185,6 +189,23 @@ void brcmf_bus_wowl_config(struct brcmf_
- 		bus->ops->wowl_config(bus->dev, enabled);
- }
- 
-+static inline size_t brcmf_bus_get_ramsize(struct brcmf_bus *bus)
-+{
-+	if (!bus->ops->get_ramsize)
-+		return 0;
-+
-+	return bus->ops->get_ramsize(bus->dev);
-+}
-+
-+static inline
-+int brcmf_bus_get_memdump(struct brcmf_bus *bus, void *data, size_t len)
-+{
-+	if (!bus->ops->get_memdump)
-+		return -EOPNOTSUPP;
-+
-+	return bus->ops->get_memdump(bus->dev, data, len);
-+}
-+
- /*
-  * interface functions from common layer
-  */
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -957,8 +957,8 @@ int brcmf_attach(struct device *dev)
- 	drvr->bus_if = dev_get_drvdata(dev);
- 	drvr->bus_if->drvr = drvr;
- 
--	/* create device debugfs folder */
--	brcmf_debugfs_attach(drvr);
-+	/* attach debug facilities */
-+	brcmf_debug_attach(drvr);
- 
- 	/* Attach and link in the protocol */
- 	ret = brcmf_proto_attach(drvr);
-@@ -1155,7 +1155,7 @@ void brcmf_detach(struct device *dev)
- 
- 	brcmf_proto_detach(drvr);
- 
--	brcmf_debugfs_detach(drvr);
-+	brcmf_debug_detach(drvr);
- 	bus_if->drvr = NULL;
- 	kfree(drvr);
- }
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -16,15 +16,45 @@
- #include <linux/debugfs.h>
- #include <linux/netdevice.h>
- #include <linux/module.h>
-+#include <linux/devcoredump.h>
- 
- #include <brcmu_wifi.h>
- #include <brcmu_utils.h>
- #include "core.h"
- #include "bus.h"
-+#include "fweh.h"
- #include "debug.h"
- 
- static struct dentry *root_folder;
- 
-+static int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-+				      size_t len)
-+{
-+	void *dump;
-+	size_t ramsize;
-+
-+	ramsize = brcmf_bus_get_ramsize(bus);
-+	if (ramsize) {
-+		dump = vzalloc(len + ramsize);
-+		if (!dump)
-+			return -ENOMEM;
-+		memcpy(dump, data, len);
-+		brcmf_bus_get_memdump(bus, dump + len, ramsize);
-+		dev_coredumpv(bus->dev, dump, len + ramsize, GFP_KERNEL);
-+	}
-+	return 0;
-+}
-+
-+static int brcmf_debug_psm_watchdog_notify(struct brcmf_if *ifp,
-+					   const struct brcmf_event_msg *evtmsg,
-+					   void *data)
-+{
-+	brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx);
-+
-+	return brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
-+					  evtmsg->datalen);
-+}
-+
- void brcmf_debugfs_init(void)
- {
- 	root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL);
-@@ -41,7 +71,7 @@ void brcmf_debugfs_exit(void)
- 	root_folder = NULL;
- }
- 
--int brcmf_debugfs_attach(struct brcmf_pub *drvr)
-+int brcmf_debug_attach(struct brcmf_pub *drvr)
- {
- 	struct device *dev = drvr->bus_if->dev;
- 
-@@ -49,12 +79,18 @@ int brcmf_debugfs_attach(struct brcmf_pu
- 		return -ENODEV;
- 
- 	drvr->dbgfs_dir = debugfs_create_dir(dev_name(dev), root_folder);
-+	if (IS_ERR(drvr->dbgfs_dir))
-+		return PTR_ERR(drvr->dbgfs_dir);
- 
--	return PTR_ERR_OR_ZERO(drvr->dbgfs_dir);
-+
-+	return brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
-+				   brcmf_debug_psm_watchdog_notify);
- }
- 
--void brcmf_debugfs_detach(struct brcmf_pub *drvr)
-+void brcmf_debug_detach(struct brcmf_pub *drvr)
- {
-+	brcmf_fweh_unregister(drvr, BRCMF_E_PSM_WATCHDOG);
-+
- 	if (!IS_ERR_OR_NULL(drvr->dbgfs_dir))
- 		debugfs_remove_recursive(drvr->dbgfs_dir);
- }
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-@@ -109,8 +109,8 @@ struct brcmf_pub;
- #ifdef DEBUG
- void brcmf_debugfs_init(void);
- void brcmf_debugfs_exit(void);
--int brcmf_debugfs_attach(struct brcmf_pub *drvr);
--void brcmf_debugfs_detach(struct brcmf_pub *drvr);
-+int brcmf_debug_attach(struct brcmf_pub *drvr);
-+void brcmf_debug_detach(struct brcmf_pub *drvr);
- struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr);
- int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn,
- 			    int (*read_fn)(struct seq_file *seq, void *data));
-@@ -121,11 +121,11 @@ static inline void brcmf_debugfs_init(vo
- static inline void brcmf_debugfs_exit(void)
- {
- }
--static inline int brcmf_debugfs_attach(struct brcmf_pub *drvr)
-+static inline int brcmf_debug_attach(struct brcmf_pub *drvr)
- {
- 	return 0;
- }
--static inline void brcmf_debugfs_detach(struct brcmf_pub *drvr)
-+static inline void brcmf_debug_detach(struct brcmf_pub *drvr)
- {
- }
- static inline
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -448,6 +448,47 @@ brcmf_pcie_copy_mem_todev(struct brcmf_p
- }
- 
- 
-+static void
-+brcmf_pcie_copy_dev_tomem(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
-+			  void *dstaddr, u32 len)
-+{
-+	void __iomem *address = devinfo->tcm + mem_offset;
-+	__le32 *dst32;
-+	__le16 *dst16;
-+	u8 *dst8;
-+
-+	if (((ulong)address & 4) || ((ulong)dstaddr & 4) || (len & 4)) {
-+		if (((ulong)address & 2) || ((ulong)dstaddr & 2) || (len & 2)) {
-+			dst8 = (u8 *)dstaddr;
-+			while (len) {
-+				*dst8 = ioread8(address);
-+				address++;
-+				dst8++;
-+				len--;
-+			}
-+		} else {
-+			len = len / 2;
-+			dst16 = (__le16 *)dstaddr;
-+			while (len) {
-+				*dst16 = cpu_to_le16(ioread16(address));
-+				address += 2;
-+				dst16++;
-+				len--;
-+			}
-+		}
-+	} else {
-+		len = len / 4;
-+		dst32 = (__le32 *)dstaddr;
-+		while (len) {
-+			*dst32 = cpu_to_le32(ioread32(address));
-+			address += 4;
-+			dst32++;
-+			len--;
-+		}
-+	}
-+}
-+
-+
- #define WRITECC32(devinfo, reg, value) brcmf_pcie_write_reg32(devinfo, \
- 		CHIPCREGOFFS(reg), value)
- 
-@@ -1352,12 +1393,36 @@ static void brcmf_pcie_wowl_config(struc
- }
- 
- 
-+static size_t brcmf_pcie_get_ramsize(struct device *dev)
-+{
-+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+	struct brcmf_pciedev *buspub = bus_if->bus_priv.pcie;
-+	struct brcmf_pciedev_info *devinfo = buspub->devinfo;
-+
-+	return devinfo->ci->ramsize - devinfo->ci->srsize;
-+}
-+
-+
-+static int brcmf_pcie_get_memdump(struct device *dev, void *data, size_t len)
-+{
-+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+	struct brcmf_pciedev *buspub = bus_if->bus_priv.pcie;
-+	struct brcmf_pciedev_info *devinfo = buspub->devinfo;
-+
-+	brcmf_dbg(PCIE, "dump at 0x%08X: len=%zu\n", devinfo->ci->rambase, len);
-+	brcmf_pcie_copy_dev_tomem(devinfo, devinfo->ci->rambase, data, len);
-+	return 0;
-+}
-+
-+
- static struct brcmf_bus_ops brcmf_pcie_bus_ops = {
- 	.txdata = brcmf_pcie_tx,
- 	.stop = brcmf_pcie_down,
- 	.txctl = brcmf_pcie_tx_ctlpkt,
- 	.rxctl = brcmf_pcie_rx_ctlpkt,
- 	.wowl_config = brcmf_pcie_wowl_config,
-+	.get_ramsize = brcmf_pcie_get_ramsize,
-+	.get_memdump = brcmf_pcie_get_memdump,
- };
- 
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3539,6 +3539,51 @@ done:
- 	return err;
- }
- 
-+static size_t brcmf_sdio_bus_get_ramsize(struct device *dev)
-+{
-+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-+	struct brcmf_sdio *bus = sdiodev->bus;
-+
-+	return bus->ci->ramsize - bus->ci->srsize;
-+}
-+
-+static int brcmf_sdio_bus_get_memdump(struct device *dev, void *data,
-+				      size_t mem_size)
-+{
-+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-+	struct brcmf_sdio *bus = sdiodev->bus;
-+	int err;
-+	int address;
-+	int offset;
-+	int len;
-+
-+	brcmf_dbg(INFO, "dump at 0x%08x: size=%zu\n", bus->ci->rambase,
-+		  mem_size);
-+
-+	address = bus->ci->rambase;
-+	offset = err = 0;
-+	sdio_claim_host(sdiodev->func[1]);
-+	while (offset < mem_size) {
-+		len = ((offset + MEMBLOCK) < mem_size) ? MEMBLOCK :
-+		      mem_size - offset;
-+		err = brcmf_sdiod_ramrw(sdiodev, false, address, data, len);
-+		if (err) {
-+			brcmf_err("error %d on reading %d membytes at 0x%08x\n",
-+				  err, len, address);
-+			goto done;
-+		}
-+		data += len;
-+		offset += len;
-+		address += len;
-+	}
-+
-+done:
-+	sdio_release_host(sdiodev->func[1]);
-+	return err;
-+}
-+
- void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus)
- {
- 	if (!bus->dpc_triggered) {
-@@ -3987,7 +4032,9 @@ static struct brcmf_bus_ops brcmf_sdio_b
- 	.txctl = brcmf_sdio_bus_txctl,
- 	.rxctl = brcmf_sdio_bus_rxctl,
- 	.gettxq = brcmf_sdio_bus_gettxq,
--	.wowl_config = brcmf_sdio_wowl_config
-+	.wowl_config = brcmf_sdio_wowl_config,
-+	.get_ramsize = brcmf_sdio_bus_get_ramsize,
-+	.get_memdump = brcmf_sdio_bus_get_memdump,
- };
- 
- static void brcmf_sdio_firmware_callback(struct device *dev,
diff --git a/package/kernel/mac80211/patches/372-0002-brcmfmac-Fix-race-condition-between-USB-probe-load-a.patch b/package/kernel/mac80211/patches/372-0002-brcmfmac-Fix-race-condition-between-USB-probe-load-a.patch
deleted file mode 100644
index 5b82bcac9a..0000000000
--- a/package/kernel/mac80211/patches/372-0002-brcmfmac-Fix-race-condition-between-USB-probe-load-a.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:12 +0200
-Subject: [PATCH] brcmfmac: Fix race condition between USB probe/load and
- disconnect.
-
-When a USB device gets disconnected due to for example removal
-then it is possible that it is still in the loading phase due to
-the asynchronous load routines. These routines can then possible
-access memory which has been freed. Fix this by mutex locking the
-device init phase.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-@@ -144,6 +144,7 @@ struct brcmf_usbdev_info {
- 
- 	struct usb_device *usbdev;
- 	struct device *dev;
-+	struct mutex dev_init_lock;
- 
- 	int ctl_in_pipe, ctl_out_pipe;
- 	struct urb *ctl_urb; /* URB for control endpoint */
-@@ -1204,6 +1205,8 @@ static void brcmf_usb_probe_phase2(struc
- 	int ret;
- 
- 	brcmf_dbg(USB, "Start fw downloading\n");
-+
-+	devinfo = bus->bus_priv.usb->devinfo;
- 	ret = check_file(fw->data);
- 	if (ret < 0) {
- 		brcmf_err("invalid firmware\n");
-@@ -1211,7 +1214,6 @@ static void brcmf_usb_probe_phase2(struc
- 		goto error;
- 	}
- 
--	devinfo = bus->bus_priv.usb->devinfo;
- 	devinfo->image = fw->data;
- 	devinfo->image_len = fw->size;
- 
-@@ -1224,9 +1226,11 @@ static void brcmf_usb_probe_phase2(struc
- 	if (ret)
- 		goto error;
- 
-+	mutex_unlock(&devinfo->dev_init_lock);
- 	return;
- error:
- 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
-+	mutex_unlock(&devinfo->dev_init_lock);
- 	device_release_driver(dev);
- }
- 
-@@ -1264,6 +1268,7 @@ static int brcmf_usb_probe_cb(struct brc
- 		if (ret)
- 			goto fail;
- 		/* we are done */
-+		mutex_unlock(&devinfo->dev_init_lock);
- 		return 0;
- 	}
- 	bus->chip = bus_pub->devid;
-@@ -1317,6 +1322,12 @@ brcmf_usb_probe(struct usb_interface *in
- 
- 	devinfo->usbdev = usb;
- 	devinfo->dev = &usb->dev;
-+	/* Take an init lock, to protect for disconnect while still loading.
-+	 * Necessary because of the asynchronous firmware load construction
-+	 */
-+	mutex_init(&devinfo->dev_init_lock);
-+	mutex_lock(&devinfo->dev_init_lock);
-+
- 	usb_set_intfdata(intf, devinfo);
- 
- 	/* Check that the device supports only one configuration */
-@@ -1391,6 +1402,7 @@ brcmf_usb_probe(struct usb_interface *in
- 	return 0;
- 
- fail:
-+	mutex_unlock(&devinfo->dev_init_lock);
- 	kfree(devinfo);
- 	usb_set_intfdata(intf, NULL);
- 	return ret;
-@@ -1403,8 +1415,19 @@ brcmf_usb_disconnect(struct usb_interfac
- 
- 	brcmf_dbg(USB, "Enter\n");
- 	devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf);
--	brcmf_usb_disconnect_cb(devinfo);
--	kfree(devinfo);
-+
-+	if (devinfo) {
-+		mutex_lock(&devinfo->dev_init_lock);
-+		/* Make sure that devinfo still exists. Firmware probe routines
-+		 * may have released the device and cleared the intfdata.
-+		 */
-+		if (!usb_get_intfdata(intf))
-+			goto done;
-+
-+		brcmf_usb_disconnect_cb(devinfo);
-+		kfree(devinfo);
-+	}
-+done:
- 	brcmf_dbg(USB, "Exit\n");
- }
- 
diff --git a/package/kernel/mac80211/patches/372-0003-brcmfmac-rename-firmware_path-to-alternative_fw_path.patch b/package/kernel/mac80211/patches/372-0003-brcmfmac-rename-firmware_path-to-alternative_fw_path.patch
deleted file mode 100644
index f877c232a2..0000000000
--- a/package/kernel/mac80211/patches/372-0003-brcmfmac-rename-firmware_path-to-alternative_fw_path.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:13 +0200
-Subject: [PATCH] brcmfmac: rename firmware_path to alternative_fw_path
-
-In brcmfmac the module parameter "firmware_path" is used as an
-alternative relative path under the search path used by firmware_class
-or ueventhelper. Rename the parameter to alternative_fw_path to avoid
-confusion.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -28,7 +28,7 @@
- #define BRCMF_FW_NVRAM_PCIEDEV_LEN		10	/* pcie/1/4/ + \0 */
- 
- char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
--module_param_string(firmware_path, brcmf_firmware_path,
-+module_param_string(alternative_fw_path, brcmf_firmware_path,
- 		    BRCMF_FW_PATH_LEN, 0440);
- 
- enum nvram_parser_state {
diff --git a/package/kernel/mac80211/patches/372-0004-brcmfmac-remove-conversational-comment.patch b/package/kernel/mac80211/patches/372-0004-brcmfmac-remove-conversational-comment.patch
deleted file mode 100644
index 0bfd9effc8..0000000000
--- a/package/kernel/mac80211/patches/372-0004-brcmfmac-remove-conversational-comment.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:14 +0200
-Subject: [PATCH] brcmfmac: remove conversational comment
-
-Removing a comment that was only useful during the review of
-the change that introduced it and which should never have been
-submitted.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -873,9 +873,6 @@ brcmf_msgbuf_process_txstatus(struct brc
- 	commonring = msgbuf->flowrings[flowid];
- 	atomic_dec(&commonring->outstanding_tx);
- 
--	/* Hante: i believe this was a bug as tx_status->msg.ifidx was used
--	 * in brcmf_txfinalize as index in drvr->iflist. Can you confirm/deny?
--	 */
- 	brcmf_txfinalize(brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx),
- 			 skb, true);
- }
diff --git a/package/kernel/mac80211/patches/372-0005-brcmfmac-Rework-p2p-attach-use-single-method-for-p2p.patch b/package/kernel/mac80211/patches/372-0005-brcmfmac-Rework-p2p-attach-use-single-method-for-p2p.patch
deleted file mode 100644
index 3ffada8d56..0000000000
--- a/package/kernel/mac80211/patches/372-0005-brcmfmac-Rework-p2p-attach-use-single-method-for-p2p.patch
+++ /dev/null
@@ -1,226 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:15 +0200
-Subject: [PATCH] brcmfmac: Rework p2p attach, use single method for p2p dev
- creation.
-
-When module param p2pon is used a p2p device is created at init.
-This patch reworks how this is done by using the same method as
-for a dynamically (by user space) created p2p device.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6237,6 +6237,17 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- 		else
- 			*cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- 	}
-+	/* p2p might require that "if-events" get processed by fweh. So
-+	 * activate the already registered event handlers now and activate
-+	 * the rest when initialization has completed. drvr->config needs to
-+	 * be assigned before activating events.
-+	 */
-+	drvr->config = cfg;
-+	err = brcmf_fweh_activate_events(ifp);
-+	if (err) {
-+		brcmf_err("FWEH activation failed (%d)\n", err);
-+		goto wiphy_unreg_out;
-+	}
- 
- 	err = brcmf_p2p_attach(cfg, p2pdev_forced);
- 	if (err) {
-@@ -6259,6 +6270,13 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- 				    brcmf_notify_tdls_peer_event);
- 	}
- 
-+	/* (re-) activate FWEH event handling */
-+	err = brcmf_fweh_activate_events(ifp);
-+	if (err) {
-+		brcmf_err("FWEH activation failed (%d)\n", err);
-+		goto wiphy_unreg_out;
-+	}
-+
- 	return cfg;
- 
- wiphy_unreg_out:
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -828,8 +828,8 @@ struct brcmf_if *brcmf_add_if(struct brc
- 	} else {
- 		brcmf_dbg(INFO, "allocate netdev interface\n");
- 		/* Allocate netdev, including space for private structure */
--		ndev = alloc_netdev(sizeof(*ifp), name, NET_NAME_UNKNOWN,
--				    ether_setup);
-+		ndev = alloc_netdev(sizeof(*ifp), is_p2pdev ? "p2p%d" : name,
-+				    NET_NAME_UNKNOWN, ether_setup);
- 		if (!ndev)
- 			return ERR_PTR(-ENOMEM);
- 
-@@ -1021,12 +1021,7 @@ int brcmf_bus_start(struct device *dev)
- 	if (IS_ERR(ifp))
- 		return PTR_ERR(ifp);
- 
--	if (brcmf_p2p_enable)
--		p2p_ifp = brcmf_add_if(drvr, 1, 0, false, "p2p%d", NULL);
--	else
--		p2p_ifp = NULL;
--	if (IS_ERR(p2p_ifp))
--		p2p_ifp = NULL;
-+	p2p_ifp = NULL;
- 
- 	/* signal bus ready */
- 	brcmf_bus_change_state(bus_if, BRCMF_BUS_UP);
-@@ -1060,11 +1055,13 @@ int brcmf_bus_start(struct device *dev)
- 		goto fail;
- 	}
- 
--	ret = brcmf_fweh_activate_events(ifp);
--	if (ret < 0)
--		goto fail;
--
- 	ret = brcmf_net_attach(ifp, false);
-+
-+	if ((!ret) && (brcmf_p2p_enable)) {
-+		p2p_ifp = drvr->iflist[1];
-+		if (p2p_ifp)
-+			ret = brcmf_net_p2p_attach(p2p_ifp);
-+	}
- fail:
- 	if (ret < 0) {
- 		brcmf_err("failed: %d\n", ret);
-@@ -1076,20 +1073,12 @@ fail:
- 			brcmf_fws_del_interface(ifp);
- 			brcmf_fws_deinit(drvr);
- 		}
--		if (drvr->iflist[0]) {
-+		if (ifp)
- 			brcmf_net_detach(ifp->ndev);
--			drvr->iflist[0] = NULL;
--		}
--		if (p2p_ifp) {
-+		if (p2p_ifp)
- 			brcmf_net_detach(p2p_ifp->ndev);
--			drvr->iflist[1] = NULL;
--		}
- 		return ret;
- 	}
--	if ((brcmf_p2p_enable) && (p2p_ifp))
--		if (brcmf_net_p2p_attach(p2p_ifp) < 0)
--			brcmf_p2p_enable = 0;
--
- 	return 0;
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -213,7 +213,8 @@ static void brcmf_fweh_handle_if_event(s
- 				   is_p2pdev, emsg->ifname, emsg->addr);
- 		if (IS_ERR(ifp))
- 			return;
--		brcmf_fws_add_interface(ifp);
-+		if (!is_p2pdev)
-+			brcmf_fws_add_interface(ifp);
- 		if (!drvr->fweh.evt_handler[BRCMF_E_IF])
- 			if (brcmf_net_attach(ifp, false) < 0)
- 				return;
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2350,83 +2350,30 @@ void brcmf_p2p_stop_device(struct wiphy
-  * brcmf_p2p_attach() - attach for P2P.
-  *
-  * @cfg: driver private data for cfg80211 interface.
-+ * @p2pdev_forced: create p2p device interface at attach.
-  */
- s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced)
- {
--	struct brcmf_if *pri_ifp;
--	struct brcmf_if *p2p_ifp;
--	struct brcmf_cfg80211_vif *p2p_vif;
- 	struct brcmf_p2p_info *p2p;
--	struct brcmf_pub *drvr;
--	s32 bssidx;
-+	struct brcmf_if *pri_ifp;
- 	s32 err = 0;
-+	void *err_ptr;
- 
- 	p2p = &cfg->p2p;
- 	p2p->cfg = cfg;
- 
--	drvr = cfg->pub;
--
--	pri_ifp = brcmf_get_ifp(drvr, 0);
-+	pri_ifp = brcmf_get_ifp(cfg->pub, 0);
- 	p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif;
- 
- 	if (p2pdev_forced) {
--		p2p_ifp = drvr->iflist[1];
-+		err_ptr = brcmf_p2p_create_p2pdev(p2p, NULL, NULL);
-+		if (IS_ERR(err_ptr)) {
-+			brcmf_err("P2P device creation failed.\n");
-+			err = PTR_ERR(err_ptr);
-+		}
- 	} else {
--		p2p_ifp = NULL;
- 		p2p->p2pdev_dynamically = true;
- 	}
--	if (p2p_ifp) {
--		p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE,
--					  false);
--		if (IS_ERR(p2p_vif)) {
--			brcmf_err("could not create discovery vif\n");
--			err = -ENOMEM;
--			goto exit;
--		}
--
--		p2p_vif->ifp = p2p_ifp;
--		p2p_ifp->vif = p2p_vif;
--		p2p_vif->wdev.netdev = p2p_ifp->ndev;
--		p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev;
--		SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy));
--
--		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
--
--		brcmf_p2p_generate_bss_mac(p2p, NULL);
--		memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
--		brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
--
--		brcmf_fweh_p2pdev_setup(pri_ifp, true);
--
--		/* Initialize P2P Discovery in the firmware */
--		err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
--		if (err < 0) {
--			brcmf_err("set p2p_disc error\n");
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--		/* obtain bsscfg index for P2P discovery */
--		err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
--		if (err < 0) {
--			brcmf_err("retrieving discover bsscfg index failed\n");
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--		/* Verify that firmware uses same bssidx as driver !! */
--		if (p2p_ifp->bssidx != bssidx) {
--			brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n",
--				  bssidx, p2p_ifp->bssidx);
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--
--		init_completion(&p2p->send_af_done);
--		INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
--		init_completion(&p2p->afx_hdl.act_frm_scan);
--		init_completion(&p2p->wait_next_af);
--exit:
--		brcmf_fweh_p2pdev_setup(pri_ifp, false);
--	}
- 	return err;
- }
- 
diff --git a/package/kernel/mac80211/patches/372-0006-brcmfmac-Fix-station-info-rate-information.patch b/package/kernel/mac80211/patches/372-0006-brcmfmac-Fix-station-info-rate-information.patch
deleted file mode 100644
index 0abcf1eef4..0000000000
--- a/package/kernel/mac80211/patches/372-0006-brcmfmac-Fix-station-info-rate-information.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:16 +0200
-Subject: [PATCH] brcmfmac: Fix station info rate information.
-
-Txrate and rxrate in get_station got assigned first with value
-in kbps and then divided by 100 to get it in 100kbps unit. The
-problem with that is that type of rate is u16 which resulted
-in incorrect values for high data rate values.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -2477,13 +2477,13 @@ brcmf_cfg80211_get_station(struct wiphy
- 		sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts);
- 		if (sinfo->tx_packets) {
- 			sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
--			sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate);
--			sinfo->txrate.legacy /= 100;
-+			sinfo->txrate.legacy =
-+				le32_to_cpu(sta_info_le.tx_rate) / 100;
- 		}
- 		if (sinfo->rx_packets) {
- 			sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE);
--			sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate);
--			sinfo->rxrate.legacy /= 100;
-+			sinfo->rxrate.legacy =
-+				le32_to_cpu(sta_info_le.rx_rate) / 100;
- 		}
- 		if (le16_to_cpu(sta_info_le.ver) >= 4) {
- 			sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES);
diff --git a/package/kernel/mac80211/patches/372-0007-brcmfmac-Add-RSSI-information-to-get_station.patch b/package/kernel/mac80211/patches/372-0007-brcmfmac-Add-RSSI-information-to-get_station.patch
deleted file mode 100644
index bb03d679df..0000000000
--- a/package/kernel/mac80211/patches/372-0007-brcmfmac-Add-RSSI-information-to-get_station.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:17 +0200
-Subject: [PATCH] brcmfmac: Add RSSI information to get_station.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -2431,6 +2431,9 @@ brcmf_cfg80211_get_station(struct wiphy
- 	struct brcmf_sta_info_le sta_info_le;
- 	u32 sta_flags;
- 	u32 is_tdls_peer;
-+	s32 total_rssi;
-+	s32 count_rssi;
-+	u32 i;
- 
- 	brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
- 	if (!check_vif_up(ifp->vif))
-@@ -2491,6 +2494,26 @@ brcmf_cfg80211_get_station(struct wiphy
- 			sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES);
- 			sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
- 		}
-+		total_rssi = 0;
-+		count_rssi = 0;
-+		for (i = 0; i < BRCMF_ANT_MAX; i++) {
-+			if (sta_info_le.rssi[i]) {
-+				sinfo->chain_signal_avg[count_rssi] =
-+					sta_info_le.rssi[i];
-+				sinfo->chain_signal[count_rssi] =
-+					sta_info_le.rssi[i];
-+				total_rssi += sta_info_le.rssi[i];
-+				count_rssi++;
-+			}
-+		}
-+		if (count_rssi) {
-+			sinfo->filled |= BIT(NL80211_STA_INFO_CHAIN_SIGNAL);
-+			sinfo->chains = count_rssi;
-+
-+			sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
-+			total_rssi /= count_rssi;
-+			sinfo->signal = total_rssi;
-+		}
- 	}
- done:
- 	brcmf_dbg(TRACE, "Exit\n");
diff --git a/package/kernel/mac80211/patches/372-0008-brcmfmac-Add-dump_station-support-to-cfg80221-ops.patch b/package/kernel/mac80211/patches/372-0008-brcmfmac-Add-dump_station-support-to-cfg80221-ops.patch
deleted file mode 100644
index a6bafd2497..0000000000
--- a/package/kernel/mac80211/patches/372-0008-brcmfmac-Add-dump_station-support-to-cfg80221-ops.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:18 +0200
-Subject: [PATCH] brcmfmac: Add dump_station support to cfg80221 ops.
-
-With this feature it becomes possible to request a station
-assoc list.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -2520,6 +2520,35 @@ done:
- 	return err;
- }
- 
-+static int
-+brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev,
-+			    int idx, u8 *mac, struct station_info *sinfo)
-+{
-+	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+	struct brcmf_if *ifp = netdev_priv(ndev);
-+	s32 err;
-+
-+	brcmf_dbg(TRACE, "Enter, idx %d\n", idx);
-+
-+	if (idx == 0) {
-+		cfg->assoclist.count = cpu_to_le32(BRCMF_MAX_ASSOCLIST);
-+		err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_ASSOCLIST,
-+					     &cfg->assoclist,
-+					     sizeof(cfg->assoclist));
-+		if (err) {
-+			brcmf_err("BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n",
-+				  err);
-+			cfg->assoclist.count = 0;
-+			return -EOPNOTSUPP;
-+		}
-+	}
-+	if (idx < le32_to_cpu(cfg->assoclist.count)) {
-+		memcpy(mac, cfg->assoclist.mac[idx], ETH_ALEN);
-+		return brcmf_cfg80211_get_station(wiphy, ndev, mac, sinfo);
-+	}
-+	return -ENOENT;
-+}
-+
- static s32
- brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev,
- 			   bool enabled, s32 timeout)
-@@ -4619,6 +4648,7 @@ static struct cfg80211_ops wl_cfg80211_o
- 	.join_ibss = brcmf_cfg80211_join_ibss,
- 	.leave_ibss = brcmf_cfg80211_leave_ibss,
- 	.get_station = brcmf_cfg80211_get_station,
-+	.dump_station = brcmf_cfg80211_dump_station,
- 	.set_tx_power = brcmf_cfg80211_set_tx_power,
- 	.get_tx_power = brcmf_cfg80211_get_tx_power,
- 	.add_key = brcmf_cfg80211_add_key,
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-@@ -407,6 +407,7 @@ struct brcmf_cfg80211_info {
- 	struct brcmu_d11inf d11inf;
- 	bool wowl_enabled;
- 	u32 pre_wowl_pmmode;
-+	struct brcmf_assoclist_le assoclist;
- };
- 
- /**
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
-@@ -72,6 +72,7 @@
- #define BRCMF_C_GET_BSS_INFO			136
- #define BRCMF_C_GET_BANDLIST			140
- #define BRCMF_C_SET_SCB_TIMEOUT			158
-+#define BRCMF_C_GET_ASSOCLIST			159
- #define BRCMF_C_GET_PHYLIST			180
- #define BRCMF_C_SET_SCAN_CHANNEL_TIME		185
- #define BRCMF_C_SET_SCAN_UNASSOC_TIME		187
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -119,6 +119,8 @@
- #define BRCMF_COUNTRY_BUF_SZ		4
- #define BRCMF_ANT_MAX			4
- 
-+#define BRCMF_MAX_ASSOCLIST		128
-+
- /* join preference types for join_pref iovar */
- enum brcmf_join_pref_types {
- 	BRCMF_JOIN_PREF_RSSI = 1,
-@@ -621,4 +623,15 @@ struct brcmf_rev_info_le {
- 	__le32 nvramrev;
- };
- 
-+/**
-+ * struct brcmf_assoclist_le - request assoc list.
-+ *
-+ * @count: indicates number of stations.
-+ * @mac: MAC addresses of stations.
-+ */
-+struct brcmf_assoclist_le {
-+	__le32 count;
-+	u8 mac[BRCMF_MAX_ASSOCLIST][ETH_ALEN];
-+};
-+
- #endif /* FWIL_TYPES_H_ */
diff --git a/package/kernel/mac80211/patches/372-0009-brcmfmac-Move-brcmf_c_preinit_dcmds-prototype-to-cor.patch b/package/kernel/mac80211/patches/372-0009-brcmfmac-Move-brcmf_c_preinit_dcmds-prototype-to-cor.patch
deleted file mode 100644
index dc549040ec..0000000000
--- a/package/kernel/mac80211/patches/372-0009-brcmfmac-Move-brcmf_c_preinit_dcmds-prototype-to-cor.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:19 +0200
-Subject: [PATCH] brcmfmac: Move brcmf_c_preinit_dcmds prototype to correct
- file.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/common.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.h
-@@ -17,4 +17,7 @@
- 
- extern const u8 ALLFFMAC[ETH_ALEN];
- 
-+/* Sets dongle media info (drv_version, mac address). */
-+int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
-+
- #endif /* BRCMFMAC_COMMON_H */
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -33,6 +33,7 @@
- #include "feature.h"
- #include "proto.h"
- #include "pcie.h"
-+#include "common.h"
- 
- MODULE_AUTHOR("Broadcom Corporation");
- MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -214,7 +214,4 @@ void brcmf_txflowblock_if(struct brcmf_i
- void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
- void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
- 
--/* Sets dongle media info (drv_version, mac address). */
--int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
--
- #endif /* BRCMFMAC_CORE_H */
diff --git a/package/kernel/mac80211/patches/372-0010-brcmfmac-Remove-unused-state-AP-creating.patch b/package/kernel/mac80211/patches/372-0010-brcmfmac-Remove-unused-state-AP-creating.patch
deleted file mode 100644
index c6a7363aa6..0000000000
--- a/package/kernel/mac80211/patches/372-0010-brcmfmac-Remove-unused-state-AP-creating.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:20 +0200
-Subject: [PATCH] brcmfmac: Remove unused state AP creating.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -839,7 +839,6 @@ brcmf_cfg80211_change_iface(struct wiphy
- 			err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO);
- 		}
- 		if (!err) {
--			set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state);
- 			brcmf_dbg(INFO, "IF Type = AP\n");
- 		}
- 	} else {
-@@ -4250,7 +4249,6 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- 
- 		brcmf_dbg(TRACE, "GO mode configuration complete\n");
- 	}
--	clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state);
- 	set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
- 
- exit:
-@@ -4315,7 +4313,6 @@ static int brcmf_cfg80211_stop_ap(struct
- 	}
- 	brcmf_set_mpc(ifp, 1);
- 	brcmf_configure_arp_offload(ifp, true);
--	set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state);
- 	clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
- 
- 	return err;
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-@@ -143,7 +143,6 @@ struct brcmf_cfg80211_profile {
-  * @BRCMF_VIF_STATUS_CONNECTING: connect/join in progress.
-  * @BRCMF_VIF_STATUS_CONNECTED: connected/joined succesfully.
-  * @BRCMF_VIF_STATUS_DISCONNECTING: disconnect/disable in progress.
-- * @BRCMF_VIF_STATUS_AP_CREATING: interface configured for AP operation.
-  * @BRCMF_VIF_STATUS_AP_CREATED: AP operation started.
-  */
- enum brcmf_vif_status {
-@@ -151,7 +150,6 @@ enum brcmf_vif_status {
- 	BRCMF_VIF_STATUS_CONNECTING,
- 	BRCMF_VIF_STATUS_CONNECTED,
- 	BRCMF_VIF_STATUS_DISCONNECTING,
--	BRCMF_VIF_STATUS_AP_CREATING,
- 	BRCMF_VIF_STATUS_AP_CREATED
- };
- 
diff --git a/package/kernel/mac80211/patches/372-0011-brcmfmac-Properly-set-carrier-state-of-netdev.patch b/package/kernel/mac80211/patches/372-0011-brcmfmac-Properly-set-carrier-state-of-netdev.patch
deleted file mode 100644
index c0948ded40..0000000000
--- a/package/kernel/mac80211/patches/372-0011-brcmfmac-Properly-set-carrier-state-of-netdev.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 8 Oct 2015 20:33:21 +0200
-Subject: [PATCH] brcmfmac: Properly set carrier state of netdev.
-
-Use the netif_carrier api to correctly set carrier state on the
-different modes.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -4250,6 +4250,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- 		brcmf_dbg(TRACE, "GO mode configuration complete\n");
- 	}
- 	set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
-+	brcmf_net_setcarrier(ifp, true);
- 
- exit:
- 	if ((err) && (!mbss)) {
-@@ -4314,6 +4315,7 @@ static int brcmf_cfg80211_stop_ap(struct
- 	brcmf_set_mpc(ifp, 1);
- 	brcmf_configure_arp_offload(ifp, true);
- 	clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
-+	brcmf_net_setcarrier(ifp, false);
- 
- 	return err;
- }
-@@ -5023,6 +5025,7 @@ brcmf_notify_connect_status(struct brcmf
- 				&ifp->vif->sme_state);
- 		} else
- 			brcmf_bss_connect_done(cfg, ndev, e, true);
-+		brcmf_net_setcarrier(ifp, true);
- 	} else if (brcmf_is_linkdown(e)) {
- 		brcmf_dbg(CONN, "Linkdown\n");
- 		if (!brcmf_is_ibssmode(ifp->vif)) {
-@@ -5032,6 +5035,7 @@ brcmf_notify_connect_status(struct brcmf
- 		brcmf_init_prof(ndev_to_prof(ndev));
- 		if (ndev != cfg_to_ndev(cfg))
- 			complete(&cfg->vif_disabled);
-+		brcmf_net_setcarrier(ifp, false);
- 	} else if (brcmf_is_nonetwork(cfg, e)) {
- 		if (brcmf_is_ibssmode(ifp->vif))
- 			clear_bit(BRCMF_VIF_STATUS_CONNECTING,
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -635,8 +635,7 @@ static int brcmf_netdev_stop(struct net_
- 
- 	brcmf_cfg80211_down(ndev);
- 
--	/* Set state and stop OS transmissions */
--	netif_stop_queue(ndev);
-+	brcmf_net_setcarrier(ifp, false);
- 
- 	return 0;
- }
-@@ -670,8 +669,8 @@ static int brcmf_netdev_open(struct net_
- 		return -EIO;
- 	}
- 
--	/* Allow transmit calls */
--	netif_start_queue(ndev);
-+	/* Clear, carrier, set when connected or AP mode. */
-+	netif_carrier_off(ndev);
- 	return 0;
- }
- 
-@@ -736,6 +735,24 @@ static void brcmf_net_detach(struct net_
- 		brcmf_cfg80211_free_netdev(ndev);
- }
- 
-+void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on)
-+{
-+	struct net_device *ndev;
-+
-+	brcmf_dbg(TRACE, "Enter, idx=%d carrier=%d\n", ifp->bssidx, on);
-+
-+	ndev = ifp->ndev;
-+	brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_DISCONNECTED, !on);
-+	if (on) {
-+		if (!netif_carrier_ok(ndev))
-+			netif_carrier_on(ndev);
-+
-+	} else {
-+		if (netif_carrier_ok(ndev))
-+			netif_carrier_off(ndev);
-+	}
-+}
-+
- static int brcmf_net_p2p_open(struct net_device *ndev)
- {
- 	brcmf_dbg(TRACE, "Enter\n");
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -154,10 +154,13 @@ struct brcmf_fws_mac_descriptor;
-  *	netif stopped due to firmware signalling flow control.
-  * @BRCMF_NETIF_STOP_REASON_FLOW:
-  *	netif stopped due to flowring full.
-+ * @BRCMF_NETIF_STOP_REASON_DISCONNECTED:
-+ *	netif stopped due to not being connected (STA mode).
-  */
- enum brcmf_netif_stop_reason {
--	BRCMF_NETIF_STOP_REASON_FWS_FC = 1,
--	BRCMF_NETIF_STOP_REASON_FLOW = 2
-+	BRCMF_NETIF_STOP_REASON_FWS_FC = BIT(0),
-+	BRCMF_NETIF_STOP_REASON_FLOW = BIT(1),
-+	BRCMF_NETIF_STOP_REASON_DISCONNECTED = BIT(2)
- };
- 
- /**
-@@ -213,5 +216,6 @@ void brcmf_txflowblock_if(struct brcmf_i
- 			  enum brcmf_netif_stop_reason reason, bool state);
- void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
- void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
-+void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
- 
- #endif /* BRCMFMAC_CORE_H */
diff --git a/package/kernel/mac80211/patches/373-brcm80211-Add-support-for-brcm4371.patch b/package/kernel/mac80211/patches/373-brcm80211-Add-support-for-brcm4371.patch
deleted file mode 100644
index ea6fad1cea..0000000000
--- a/package/kernel/mac80211/patches/373-brcm80211-Add-support-for-brcm4371.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Eric Caruso <ejcaruso@google.com>
-Date: Wed, 14 Oct 2015 12:34:11 -0700
-Subject: [PATCH] brcm80211: Add support for brcm4371
-
-This is a new Broadcom chip and we should be able to recognize it.
-
-Signed-off-by: Eric Caruso <ejcaruso@google.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -682,6 +682,7 @@ static u32 brcmf_chip_tcm_rambase(struct
- 	case BRCM_CC_43570_CHIP_ID:
- 	case BRCM_CC_4358_CHIP_ID:
- 	case BRCM_CC_43602_CHIP_ID:
-+	case BRCM_CC_4371_CHIP_ID:
- 		return 0x180000;
- 	case BRCM_CC_4365_CHIP_ID:
- 	case BRCM_CC_4366_CHIP_ID:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -59,6 +59,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_4365_NVRAM_NAME		"brcm/brcmfmac4365b-pcie.txt"
- #define BRCMF_PCIE_4366_FW_NAME			"brcm/brcmfmac4366b-pcie.bin"
- #define BRCMF_PCIE_4366_NVRAM_NAME		"brcm/brcmfmac4366b-pcie.txt"
-+#define BRCMF_PCIE_4371_FW_NAME			"brcm/brcmfmac4371-pcie.bin"
-+#define BRCMF_PCIE_4371_NVRAM_NAME		"brcm/brcmfmac4371-pcie.txt"
- 
- #define BRCMF_PCIE_FW_UP_TIMEOUT		2000 /* msec */
- 
-@@ -212,6 +214,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME)
- MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4366_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4371_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4371_NVRAM_NAME);
- 
- 
- struct brcmf_pcie_console {
-@@ -1521,6 +1525,10 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_4366_FW_NAME;
- 		nvram_name = BRCMF_PCIE_4366_NVRAM_NAME;
- 		break;
-+	case BRCM_CC_4371_CHIP_ID:
-+		fw_name = BRCMF_PCIE_4371_FW_NAME;
-+		nvram_name = BRCMF_PCIE_4371_NVRAM_NAME;
-+		break;
- 	default:
- 		brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip);
- 		return -ENODEV;
-@@ -2060,6 +2068,7 @@ static struct pci_device_id brcmf_pcie_d
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4371_DEVICE_ID),
- 	{ /* end: all zeroes */ }
- };
- 
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -50,6 +50,7 @@
- #define BRCM_CC_43602_CHIP_ID		43602
- #define BRCM_CC_4365_CHIP_ID		0x4365
- #define BRCM_CC_4366_CHIP_ID		0x4366
-+#define BRCM_CC_4371_CHIP_ID		0x4371
- 
- /* USB Device IDs */
- #define BRCM_USB_43143_DEVICE_ID	0xbd1e
-@@ -75,6 +76,7 @@
- #define BRCM_PCIE_4366_DEVICE_ID	0x43c3
- #define BRCM_PCIE_4366_2G_DEVICE_ID	0x43c4
- #define BRCM_PCIE_4366_5G_DEVICE_ID	0x43c5
-+#define BRCM_PCIE_4371_DEVICE_ID	0x440d
- 
- 
- /* brcmsmac IDs */
diff --git a/package/kernel/mac80211/patches/374-0001-brcmfmac-Add-support-for-the-BCM4359-11ac-RSDB-PCIE-.patch b/package/kernel/mac80211/patches/374-0001-brcmfmac-Add-support-for-the-BCM4359-11ac-RSDB-PCIE-.patch
deleted file mode 100644
index 221bae6299..0000000000
--- a/package/kernel/mac80211/patches/374-0001-brcmfmac-Add-support-for-the-BCM4359-11ac-RSDB-PCIE-.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:11 +0100
-Subject: [PATCH] brcmfmac: Add support for the BCM4359 11ac RSDB PCIE device.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -681,6 +681,7 @@ static u32 brcmf_chip_tcm_rambase(struct
- 	case BRCM_CC_43569_CHIP_ID:
- 	case BRCM_CC_43570_CHIP_ID:
- 	case BRCM_CC_4358_CHIP_ID:
-+	case BRCM_CC_4359_CHIP_ID:
- 	case BRCM_CC_43602_CHIP_ID:
- 	case BRCM_CC_4371_CHIP_ID:
- 		return 0x180000;
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -55,6 +55,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_43570_NVRAM_NAME		"brcm/brcmfmac43570-pcie.txt"
- #define BRCMF_PCIE_4358_FW_NAME			"brcm/brcmfmac4358-pcie.bin"
- #define BRCMF_PCIE_4358_NVRAM_NAME		"brcm/brcmfmac4358-pcie.txt"
-+#define BRCMF_PCIE_4359_FW_NAME			"brcm/brcmfmac4359-pcie.bin"
-+#define BRCMF_PCIE_4359_NVRAM_NAME		"brcm/brcmfmac4359-pcie.txt"
- #define BRCMF_PCIE_4365_FW_NAME			"brcm/brcmfmac4365b-pcie.bin"
- #define BRCMF_PCIE_4365_NVRAM_NAME		"brcm/brcmfmac4365b-pcie.txt"
- #define BRCMF_PCIE_4366_FW_NAME			"brcm/brcmfmac4366b-pcie.bin"
-@@ -210,6 +212,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4359_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4359_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME);
-@@ -1517,6 +1521,10 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_4358_FW_NAME;
- 		nvram_name = BRCMF_PCIE_4358_NVRAM_NAME;
- 		break;
-+	case BRCM_CC_4359_CHIP_ID:
-+		fw_name = BRCMF_PCIE_4359_FW_NAME;
-+		nvram_name = BRCMF_PCIE_4359_NVRAM_NAME;
-+		break;
- 	case BRCM_CC_4365_CHIP_ID:
- 		fw_name = BRCMF_PCIE_4365_FW_NAME;
- 		nvram_name = BRCMF_PCIE_4365_NVRAM_NAME;
-@@ -2058,6 +2066,7 @@ static struct pci_device_id brcmf_pcie_d
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4358_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4359_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -47,6 +47,7 @@
- #define BRCM_CC_43569_CHIP_ID		43569
- #define BRCM_CC_43570_CHIP_ID		43570
- #define BRCM_CC_4358_CHIP_ID		0x4358
-+#define BRCM_CC_4359_CHIP_ID		0x4359
- #define BRCM_CC_43602_CHIP_ID		43602
- #define BRCM_CC_4365_CHIP_ID		0x4365
- #define BRCM_CC_4366_CHIP_ID		0x4366
-@@ -66,6 +67,7 @@
- #define BRCM_PCIE_43567_DEVICE_ID	0x43d3
- #define BRCM_PCIE_43570_DEVICE_ID	0x43d9
- #define BRCM_PCIE_4358_DEVICE_ID	0x43e9
-+#define BRCM_PCIE_4359_DEVICE_ID	0x43ef
- #define BRCM_PCIE_43602_DEVICE_ID	0x43ba
- #define BRCM_PCIE_43602_2G_DEVICE_ID	0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID	0x43bc
diff --git a/package/kernel/mac80211/patches/374-0002-brcmfmac-Simplify-and-fix-usage-of-brcmf_ifname.patch b/package/kernel/mac80211/patches/374-0002-brcmfmac-Simplify-and-fix-usage-of-brcmf_ifname.patch
deleted file mode 100644
index 331896b98d..0000000000
--- a/package/kernel/mac80211/patches/374-0002-brcmfmac-Simplify-and-fix-usage-of-brcmf_ifname.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:12 +0100
-Subject: [PATCH] brcmfmac: Simplify and fix usage of brcmf_ifname.
-
-brcmf_ifname is a debug function to return a name related to an ifp,
-but is using a rather complex implementation. It was also used
-wrongly from bcdc as it did not use the bsscfgidx as it was supposed
-to, but bssidx. This patch fixes that bug and simplifies
-brcmf_ifname.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-@@ -187,7 +187,8 @@ retry:
- 		goto retry;
- 	if (id != bcdc->reqid) {
- 		brcmf_err("%s: unexpected request id %d (expected %d)\n",
--			  brcmf_ifname(drvr, ifidx), id, bcdc->reqid);
-+			  brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id,
-+			  bcdc->reqid);
- 		ret = -EINVAL;
- 		goto done;
- 	}
-@@ -234,7 +235,8 @@ brcmf_proto_bcdc_set_dcmd(struct brcmf_p
- 
- 	if (id != bcdc->reqid) {
- 		brcmf_err("%s: unexpected request id %d (expected %d)\n",
--			  brcmf_ifname(drvr, ifidx), id, bcdc->reqid);
-+			  brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id,
-+			  bcdc->reqid);
- 		ret = -EINVAL;
- 		goto done;
- 	}
-@@ -298,13 +300,13 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 	if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
- 	    BCDC_PROTO_VER) {
- 		brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
--			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
-+			  brcmf_ifname(tmp_if), h->flags);
- 		return -EBADE;
- 	}
- 
- 	if (h->flags & BCDC_FLAG_SUM_GOOD) {
- 		brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n",
--			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
-+			  brcmf_ifname(tmp_if), h->flags);
- 		pktbuf->ip_summed = CHECKSUM_UNNECESSARY;
- 	}
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -66,20 +66,13 @@ static int brcmf_p2p_enable;
- module_param_named(p2pon, brcmf_p2p_enable, int, 0);
- MODULE_PARM_DESC(p2pon, "enable legacy p2p management functionality");
- 
--char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx)
-+char *brcmf_ifname(struct brcmf_if *ifp)
- {
--	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
--		brcmf_err("ifidx %d out of range\n", ifidx);
--		return "<if_bad>";
--	}
--
--	if (drvr->iflist[ifidx] == NULL) {
--		brcmf_err("null i/f %d\n", ifidx);
-+	if (!ifp)
- 		return "<if_null>";
--	}
- 
--	if (drvr->iflist[ifidx]->ndev)
--		return drvr->iflist[ifidx]->ndev->name;
-+	if (ifp->ndev)
-+		return ifp->ndev->name;
- 
- 	return "<if_none>";
- }
-@@ -237,14 +230,14 @@ static netdev_tx_t brcmf_netdev_start_xm
- 		struct sk_buff *skb2;
- 
- 		brcmf_dbg(INFO, "%s: insufficient headroom\n",
--			  brcmf_ifname(drvr, ifp->bssidx));
-+			  brcmf_ifname(ifp));
- 		drvr->bus_if->tx_realloc++;
- 		skb2 = skb_realloc_headroom(skb, drvr->hdrlen);
- 		dev_kfree_skb(skb);
- 		skb = skb2;
- 		if (skb == NULL) {
- 			brcmf_err("%s: skb_realloc_headroom failed\n",
--				  brcmf_ifname(drvr, ifp->bssidx));
-+				  brcmf_ifname(ifp));
- 			ret = -ENOMEM;
- 			goto done;
- 		}
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -205,7 +205,7 @@ struct brcmf_skb_reorder_data {
- int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
- 
- /* Return pointer to interface name */
--char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
-+char *brcmf_ifname(struct brcmf_if *ifp);
- struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
diff --git a/package/kernel/mac80211/patches/374-0003-brcmfmac-Remove-unnecessary-check-from-start_xmit.patch b/package/kernel/mac80211/patches/374-0003-brcmfmac-Remove-unnecessary-check-from-start_xmit.patch
deleted file mode 100644
index 4d60521cc5..0000000000
--- a/package/kernel/mac80211/patches/374-0003-brcmfmac-Remove-unnecessary-check-from-start_xmit.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:13 +0100
-Subject: [PATCH] brcmfmac: Remove unnecessary check from start_xmit.
-
-The brcmf_netdev_start_xmit checks if the ndev is still valid by
-checking if it still exists in database. This check is not needed
-and therefor removed.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -217,14 +217,6 @@ static netdev_tx_t brcmf_netdev_start_xm
- 		goto done;
- 	}
- 
--	if (!drvr->iflist[ifp->bssidx]) {
--		brcmf_err("bad ifidx %d\n", ifp->bssidx);
--		netif_stop_queue(ndev);
--		dev_kfree_skb(skb);
--		ret = -ENODEV;
--		goto done;
--	}
--
- 	/* Make sure there's enough room for any header */
- 	if (skb_headroom(skb) < drvr->hdrlen) {
- 		struct sk_buff *skb2;
diff --git a/package/kernel/mac80211/patches/374-0004-brcmfmac-Remove-unncessary-variable-irq_requested.patch b/package/kernel/mac80211/patches/374-0004-brcmfmac-Remove-unncessary-variable-irq_requested.patch
deleted file mode 100644
index 50302975ef..0000000000
--- a/package/kernel/mac80211/patches/374-0004-brcmfmac-Remove-unncessary-variable-irq_requested.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:14 +0100
-Subject: [PATCH] brcmfmac: Remove unncessary variable irq_requested.
-
-The variable irq_requested is unneeded as the functionality
-it is providing, is also provided by the variable irq_allocated.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -257,7 +257,6 @@ struct brcmf_pcie_core_info {
- struct brcmf_pciedev_info {
- 	enum brcmf_pcie_state state;
- 	bool in_irq;
--	bool irq_requested;
- 	struct pci_dev *pdev;
- 	char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
- 	char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
-@@ -889,7 +888,6 @@ static int brcmf_pcie_request_irq(struct
- 
- 	brcmf_dbg(PCIE, "Enter\n");
- 	/* is it a v1 or v2 implementation */
--	devinfo->irq_requested = false;
- 	pci_enable_msi(pdev);
- 	if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) {
- 		if (request_threaded_irq(pdev->irq,
-@@ -912,7 +910,6 @@ static int brcmf_pcie_request_irq(struct
- 			return -EIO;
- 		}
- 	}
--	devinfo->irq_requested = true;
- 	devinfo->irq_allocated = true;
- 	return 0;
- }
-@@ -930,9 +927,6 @@ static void brcmf_pcie_release_irq(struc
- 	pdev = devinfo->pdev;
- 
- 	brcmf_pcie_intr_disable(devinfo);
--	if (!devinfo->irq_requested)
--		return;
--	devinfo->irq_requested = false;
- 	free_irq(pdev->irq, devinfo);
- 	pci_disable_msi(pdev);
- 
diff --git a/package/kernel/mac80211/patches/374-0005-brcmfmac-Disable-runtime-pm-for-USB.patch b/package/kernel/mac80211/patches/374-0005-brcmfmac-Disable-runtime-pm-for-USB.patch
deleted file mode 100644
index f2afb90c17..0000000000
--- a/package/kernel/mac80211/patches/374-0005-brcmfmac-Disable-runtime-pm-for-USB.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:15 +0100
-Subject: [PATCH] brcmfmac: Disable runtime pm for USB.
-
-Currently runtime pm is enabled for USB, but it is not properly
-supported by driver. This patch disables the runtime PM support
-completely for USB, as it currently can result in problems on
-some systems.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-@@ -1504,7 +1504,6 @@ static struct usb_driver brcmf_usbdrvr =
- 	.suspend = brcmf_usb_suspend,
- 	.resume = brcmf_usb_resume,
- 	.reset_resume = brcmf_usb_reset_resume,
--	.supports_autosuspend = 1,
- #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,5,0))
- 	.disable_hub_initiated_lpm = 1,
- #endif
diff --git a/package/kernel/mac80211/patches/374-0006-brcmfmac-Add-RSDB-support.patch b/package/kernel/mac80211/patches/374-0006-brcmfmac-Add-RSDB-support.patch
deleted file mode 100644
index 78a95c57b1..0000000000
--- a/package/kernel/mac80211/patches/374-0006-brcmfmac-Add-RSDB-support.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:16 +0100
-Subject: [PATCH] brcmfmac: Add RSDB support.
-
-Broadcom devices with a single 802.11 core can work on two band
-concurrently using VSDB feature, ie. Virtual Simultaneous Dual-Band.
-For devices that are fitted with two 802.11 cores and RF paths the
-driver should support a firmware feature called RSDB, which stands
-for Real Simultaneous Dual-Band. RSDB works almost autonomously in
-firmware except for AP config. When the device supports RSDB then
-the interface should not be brought down when configuring it,
-otherwise the link (if configured) on the other interface will be
-lost.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-[kvalo@codeaurora.org: changed the commit log based on discussion]
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -4182,7 +4182,9 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- 			}
- 		}
- 
--		if (dev_role == NL80211_IFTYPE_AP) {
-+		if ((dev_role == NL80211_IFTYPE_AP) &&
-+		    ((ifp->ifidx == 0) ||
-+		     !brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB))) {
- 			err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
- 			if (err < 0) {
- 				brcmf_err("BRCMF_C_DOWN error %d\n", err);
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -137,6 +137,7 @@ void brcmf_feat_attach(struct brcmf_pub
- 	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
- 		brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p");
-+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode");
- 
- 	if (brcmf_feature_disable) {
- 		brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -24,13 +24,16 @@
-  * PNO: preferred network offload.
-  * WOWL: Wake-On-WLAN.
-  * P2P: peer-to-peer
-+ * RSDB: Real Simultaneous Dual Band
-  */
- #define BRCMF_FEAT_LIST \
- 	BRCMF_FEAT_DEF(MBSS) \
- 	BRCMF_FEAT_DEF(MCHAN) \
- 	BRCMF_FEAT_DEF(PNO) \
- 	BRCMF_FEAT_DEF(WOWL) \
--	BRCMF_FEAT_DEF(P2P)
-+	BRCMF_FEAT_DEF(P2P) \
-+	BRCMF_FEAT_DEF(RSDB)
-+
- /*
-  * Quirks:
-  *
diff --git a/package/kernel/mac80211/patches/374-0007-brcmfmac-Use-consistent-naming-for-bsscfgidx.patch b/package/kernel/mac80211/patches/374-0007-brcmfmac-Use-consistent-naming-for-bsscfgidx.patch
deleted file mode 100644
index d1e72643bf..0000000000
--- a/package/kernel/mac80211/patches/374-0007-brcmfmac-Use-consistent-naming-for-bsscfgidx.patch
+++ /dev/null
@@ -1,533 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:17 +0100
-Subject: [PATCH] brcmfmac: Use consistent naming for bsscfgidx.
-
-The variable bsscfgidx is used in different places with different
-names, e.g. bsscfg, bssidx, bsscfg_idx. This patch cleans this up
-by using bsscfgidx everywhere.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -775,7 +775,8 @@ brcmf_cfg80211_change_iface(struct wiphy
- 	s32 ap = 0;
- 	s32 err = 0;
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, type=%d\n", ifp->bsscfgidx,
-+		  type);
- 
- 	/* WAR: There are a number of p2p interface related problems which
- 	 * need to be handled initially (before doing the validate).
-@@ -2920,7 +2921,7 @@ brcmf_cfg80211_escan_handler(struct brcm
- 	status = e->status;
- 
- 	if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
--		brcmf_err("scan not ready, bssidx=%d\n", ifp->bssidx);
-+		brcmf_err("scan not ready, bsscfgidx=%d\n", ifp->bsscfgidx);
- 		return -EPERM;
- 	}
- 
-@@ -3876,7 +3877,8 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- 	ifp = vif->ifp;
- 	saved_ie = &vif->saved_ie;
- 
--	brcmf_dbg(TRACE, "bssidx %d, pktflag : 0x%02X\n", ifp->bssidx, pktflag);
-+	brcmf_dbg(TRACE, "bsscfgidx %d, pktflag : 0x%02X\n", ifp->bsscfgidx,
-+		  pktflag);
- 	iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
- 	if (!iovar_ie_buf)
- 		return -ENOMEM;
-@@ -4240,7 +4242,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- 			brcmf_err("setting ssid failed %d\n", err);
- 			goto exit;
- 		}
--		bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx);
-+		bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx);
- 		bss_enable.enable = cpu_to_le32(1);
- 		err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
- 					       sizeof(bss_enable));
-@@ -4307,7 +4309,7 @@ static int brcmf_cfg80211_stop_ap(struct
- 		if (err < 0)
- 			brcmf_err("BRCMF_C_UP error %d\n", err);
- 	} else {
--		bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx);
-+		bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx);
- 		bss_enable.enable = cpu_to_le32(0);
- 		err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
- 					       sizeof(bss_enable));
-@@ -5093,9 +5095,9 @@ static s32 brcmf_notify_vif_event(struct
- 	struct brcmf_cfg80211_vif_event *event = &cfg->vif_event;
- 	struct brcmf_cfg80211_vif *vif;
- 
--	brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfg %u\n",
-+	brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfgidx %u\n",
- 		  ifevent->action, ifevent->flags, ifevent->ifidx,
--		  ifevent->bssidx);
-+		  ifevent->bsscfgidx);
- 
- 	mutex_lock(&event->vif_event_lock);
- 	event->action = ifevent->action;
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -80,7 +80,7 @@ char *brcmf_ifname(struct brcmf_if *ifp)
- struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
- {
- 	struct brcmf_if *ifp;
--	s32 bssidx;
-+	s32 bsscfgidx;
- 
- 	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
- 		brcmf_err("ifidx %d out of range\n", ifidx);
-@@ -88,9 +88,9 @@ struct brcmf_if *brcmf_get_ifp(struct br
- 	}
- 
- 	ifp = NULL;
--	bssidx = drvr->if2bss[ifidx];
--	if (bssidx >= 0)
--		ifp = drvr->iflist[bssidx];
-+	bsscfgidx = drvr->if2bss[ifidx];
-+	if (bsscfgidx >= 0)
-+		ifp = drvr->iflist[bsscfgidx];
- 
- 	return ifp;
- }
-@@ -108,7 +108,7 @@ static void _brcmf_set_multicast_list(st
- 
- 	ifp = container_of(work, struct brcmf_if, multicast_work);
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
- 
- 	ndev = ifp->ndev;
- 
-@@ -168,7 +168,7 @@ _brcmf_set_mac_address(struct work_struc
- 
- 	ifp = container_of(work, struct brcmf_if, setmacaddr_work);
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
- 
- 	err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr,
- 				       ETH_ALEN);
-@@ -206,7 +206,7 @@ static netdev_tx_t brcmf_netdev_start_xm
- 	struct brcmf_pub *drvr = ifp->drvr;
- 	struct ethhdr *eh = (struct ethhdr *)(skb->data);
- 
--	brcmf_dbg(DATA, "Enter, idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(DATA, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
- 
- 	/* Can the device send data? */
- 	if (drvr->bus_if->state != BRCMF_BUS_UP) {
-@@ -267,8 +267,8 @@ void brcmf_txflowblock_if(struct brcmf_i
- 	if (!ifp || !ifp->ndev)
- 		return;
- 
--	brcmf_dbg(TRACE, "enter: idx=%d stop=0x%X reason=%d state=%d\n",
--		  ifp->bssidx, ifp->netif_stop, reason, state);
-+	brcmf_dbg(TRACE, "enter: bsscfgidx=%d stop=0x%X reason=%d state=%d\n",
-+		  ifp->bsscfgidx, ifp->netif_stop, reason, state);
- 
- 	spin_lock_irqsave(&ifp->netif_stop_lock, flags);
- 	if (state) {
-@@ -587,7 +587,7 @@ static struct net_device_stats *brcmf_ne
- {
- 	struct brcmf_if *ifp = netdev_priv(ndev);
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
- 
- 	return &ifp->stats;
- }
-@@ -616,7 +616,7 @@ static int brcmf_netdev_stop(struct net_
- {
- 	struct brcmf_if *ifp = netdev_priv(ndev);
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
- 
- 	brcmf_cfg80211_down(ndev);
- 
-@@ -632,7 +632,7 @@ static int brcmf_netdev_open(struct net_
- 	struct brcmf_bus *bus_if = drvr->bus_if;
- 	u32 toe_ol;
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
- 
- 	/* If bus is not ready, can't continue */
- 	if (bus_if->state != BRCMF_BUS_UP) {
-@@ -674,7 +674,7 @@ int brcmf_net_attach(struct brcmf_if *if
- 	struct net_device *ndev;
- 	s32 err;
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx,
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d mac=%pM\n", ifp->bsscfgidx,
- 		  ifp->mac_addr);
- 	ndev = ifp->ndev;
- 
-@@ -706,7 +706,7 @@ int brcmf_net_attach(struct brcmf_if *if
- 	return 0;
- 
- fail:
--	drvr->iflist[ifp->bssidx] = NULL;
-+	drvr->iflist[ifp->bsscfgidx] = NULL;
- 	ndev->netdev_ops = NULL;
- 	free_netdev(ndev);
- 	return -EBADE;
-@@ -724,7 +724,8 @@ void brcmf_net_setcarrier(struct brcmf_i
- {
- 	struct net_device *ndev;
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d carrier=%d\n", ifp->bssidx, on);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d carrier=%d\n", ifp->bsscfgidx,
-+		  on);
- 
- 	ndev = ifp->ndev;
- 	brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_DISCONNECTED, !on);
-@@ -771,7 +772,7 @@ static int brcmf_net_p2p_attach(struct b
- {
- 	struct net_device *ndev;
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx,
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d mac=%pM\n", ifp->bsscfgidx,
- 		  ifp->mac_addr);
- 	ndev = ifp->ndev;
- 
-@@ -790,21 +791,21 @@ static int brcmf_net_p2p_attach(struct b
- 	return 0;
- 
- fail:
--	ifp->drvr->iflist[ifp->bssidx] = NULL;
-+	ifp->drvr->iflist[ifp->bsscfgidx] = NULL;
- 	ndev->netdev_ops = NULL;
- 	free_netdev(ndev);
- 	return -EBADE;
- }
- 
--struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
-+struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
- 			      bool is_p2pdev, char *name, u8 *mac_addr)
- {
- 	struct brcmf_if *ifp;
- 	struct net_device *ndev;
- 
--	brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifidx);
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx, ifidx);
- 
--	ifp = drvr->iflist[bssidx];
-+	ifp = drvr->iflist[bsscfgidx];
- 	/*
- 	 * Delete the existing interface before overwriting it
- 	 * in case we missed the BRCMF_E_IF_DEL event.
-@@ -815,7 +816,7 @@ struct brcmf_if *brcmf_add_if(struct brc
- 		if (ifidx) {
- 			netif_stop_queue(ifp->ndev);
- 			brcmf_net_detach(ifp->ndev);
--			drvr->iflist[bssidx] = NULL;
-+			drvr->iflist[bsscfgidx] = NULL;
- 		} else {
- 			brcmf_err("ignore IF event\n");
- 			return ERR_PTR(-EINVAL);
-@@ -839,15 +840,15 @@ struct brcmf_if *brcmf_add_if(struct brc
- 		ndev->destructor = brcmf_cfg80211_free_netdev;
- 		ifp = netdev_priv(ndev);
- 		ifp->ndev = ndev;
--		/* store mapping ifidx to bssidx */
-+		/* store mapping ifidx to bsscfgidx */
- 		if (drvr->if2bss[ifidx] == BRCMF_BSSIDX_INVALID)
--			drvr->if2bss[ifidx] = bssidx;
-+			drvr->if2bss[ifidx] = bsscfgidx;
- 	}
- 
- 	ifp->drvr = drvr;
--	drvr->iflist[bssidx] = ifp;
-+	drvr->iflist[bsscfgidx] = ifp;
- 	ifp->ifidx = ifidx;
--	ifp->bssidx = bssidx;
-+	ifp->bsscfgidx = bsscfgidx;
- 
- 	init_waitqueue_head(&ifp->pend_8021x_wait);
- 	spin_lock_init(&ifp->netif_stop_lock);
-@@ -861,21 +862,22 @@ struct brcmf_if *brcmf_add_if(struct brc
- 	return ifp;
- }
- 
--static void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx)
-+static void brcmf_del_if(struct brcmf_pub *drvr, s32 bsscfgidx)
- {
- 	struct brcmf_if *ifp;
- 
--	ifp = drvr->iflist[bssidx];
--	drvr->iflist[bssidx] = NULL;
-+	ifp = drvr->iflist[bsscfgidx];
-+	drvr->iflist[bsscfgidx] = NULL;
- 	if (!ifp) {
--		brcmf_err("Null interface, idx=%d\n", bssidx);
-+		brcmf_err("Null interface, bsscfgidx=%d\n", bsscfgidx);
- 		return;
- 	}
--	brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx);
--	if (drvr->if2bss[ifp->ifidx] == bssidx)
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx,
-+		  ifp->ifidx);
-+	if (drvr->if2bss[ifp->ifidx] == bsscfgidx)
- 		drvr->if2bss[ifp->ifidx] = BRCMF_BSSIDX_INVALID;
- 	if (ifp->ndev) {
--		if (bssidx == 0) {
-+		if (bsscfgidx == 0) {
- 			if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
- 				rtnl_lock();
- 				brcmf_netdev_stop(ifp->ndev);
-@@ -905,12 +907,12 @@ static void brcmf_del_if(struct brcmf_pu
- 
- void brcmf_remove_interface(struct brcmf_if *ifp)
- {
--	if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp))
-+	if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bsscfgidx] != ifp))
- 		return;
--	brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", ifp->bssidx,
-+	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", ifp->bsscfgidx,
- 		  ifp->ifidx);
- 	brcmf_fws_del_interface(ifp);
--	brcmf_del_if(ifp->drvr, ifp->bssidx);
-+	brcmf_del_if(ifp->drvr, ifp->bsscfgidx);
- }
- 
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr)
-@@ -925,10 +927,10 @@ int brcmf_get_next_free_bsscfgidx(struct
- 	highest = 2;
- 	for (ifidx = 0; ifidx < BRCMF_MAX_IFS; ifidx++) {
- 		if (drvr->iflist[ifidx]) {
--			if (drvr->iflist[ifidx]->bssidx == bsscfgidx)
-+			if (drvr->iflist[ifidx]->bsscfgidx == bsscfgidx)
- 				bsscfgidx = highest + 1;
--			else if (drvr->iflist[ifidx]->bssidx > highest)
--				highest = drvr->iflist[ifidx]->bssidx;
-+			else if (drvr->iflist[ifidx]->bsscfgidx > highest)
-+				highest = drvr->iflist[ifidx]->bsscfgidx;
- 		} else {
- 			available = true;
- 		}
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -174,7 +174,7 @@ enum brcmf_netif_stop_reason {
-  * @multicast_work: worker object for multicast provisioning.
-  * @fws_desc: interface specific firmware-signalling descriptor.
-  * @ifidx: interface index in device firmware.
-- * @bssidx: index of bss associated with this interface.
-+ * @bsscfgidx: index of bss associated with this interface.
-  * @mac_addr: assigned mac address.
-  * @netif_stop: bitmap indicates reason why netif queues are stopped.
-  * @netif_stop_lock: spinlock for update netif_stop from multiple sources.
-@@ -190,7 +190,7 @@ struct brcmf_if {
- 	struct work_struct multicast_work;
- 	struct brcmf_fws_mac_descriptor *fws_desc;
- 	int ifidx;
--	s32 bssidx;
-+	s32 bsscfgidx;
- 	u8 mac_addr[ETH_ALEN];
- 	u8 netif_stop;
- 	spinlock_t netif_stop_lock;
-@@ -208,7 +208,7 @@ int brcmf_netdev_wait_pend8021x(struct b
- char *brcmf_ifname(struct brcmf_if *ifp);
- struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
--struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
-+struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
- 			      bool is_p2pdev, char *name, u8 *mac_addr);
- void brcmf_remove_interface(struct brcmf_if *ifp);
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -49,7 +49,7 @@ static int brcmf_debug_psm_watchdog_noti
- 					   const struct brcmf_event_msg *evtmsg,
- 					   void *data)
- {
--	brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
- 
- 	return brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
- 					  evtmsg->datalen);
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -182,8 +182,8 @@ static void brcmf_fweh_handle_if_event(s
- 	bool is_p2pdev;
- 	int err = 0;
- 
--	brcmf_dbg(EVENT, "action: %u idx: %u bsscfg: %u flags: %u role: %u\n",
--		  ifevent->action, ifevent->ifidx, ifevent->bssidx,
-+	brcmf_dbg(EVENT, "action: %u ifidx: %u bsscfgidx: %u flags: %u role: %u\n",
-+		  ifevent->action, ifevent->ifidx, ifevent->bsscfgidx,
- 		  ifevent->flags, ifevent->role);
- 
- 	/* The P2P Device interface event must not be ignored contrary to what
-@@ -204,12 +204,12 @@ static void brcmf_fweh_handle_if_event(s
- 		return;
- 	}
- 
--	ifp = drvr->iflist[ifevent->bssidx];
-+	ifp = drvr->iflist[ifevent->bsscfgidx];
- 
- 	if (ifevent->action == BRCMF_E_IF_ADD) {
- 		brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname,
- 			  emsg->addr);
--		ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx,
-+		ifp = brcmf_add_if(drvr, ifevent->bsscfgidx, ifevent->ifidx,
- 				   is_p2pdev, emsg->ifname, emsg->addr);
- 		if (IS_ERR(ifp))
- 			return;
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-@@ -219,7 +219,7 @@ struct brcmf_if_event {
- 	u8 ifidx;
- 	u8 action;
- 	u8 flags;
--	u8 bssidx;
-+	u8 bsscfgidx;
- 	u8 role;
- };
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
-@@ -293,22 +293,22 @@ brcmf_fil_iovar_int_get(struct brcmf_if
- }
- 
- static u32
--brcmf_create_bsscfg(s32 bssidx, char *name, char *data, u32 datalen, char *buf,
--		    u32 buflen)
-+brcmf_create_bsscfg(s32 bsscfgidx, char *name, char *data, u32 datalen,
-+		    char *buf, u32 buflen)
- {
- 	const s8 *prefix = "bsscfg:";
- 	s8 *p;
- 	u32 prefixlen;
- 	u32 namelen;
- 	u32 iolen;
--	__le32 bssidx_le;
-+	__le32 bsscfgidx_le;
- 
--	if (bssidx == 0)
-+	if (bsscfgidx == 0)
- 		return brcmf_create_iovar(name, data, datalen, buf, buflen);
- 
- 	prefixlen = strlen(prefix);
- 	namelen = strlen(name) + 1; /* lengh of iovar  name + null */
--	iolen = prefixlen + namelen + sizeof(bssidx_le) + datalen;
-+	iolen = prefixlen + namelen + sizeof(bsscfgidx_le) + datalen;
- 
- 	if (buflen < iolen) {
- 		brcmf_err("buffer is too short\n");
-@@ -326,9 +326,9 @@ brcmf_create_bsscfg(s32 bssidx, char *na
- 	p += namelen;
- 
- 	/* bss config index as first data */
--	bssidx_le = cpu_to_le32(bssidx);
--	memcpy(p, &bssidx_le, sizeof(bssidx_le));
--	p += sizeof(bssidx_le);
-+	bsscfgidx_le = cpu_to_le32(bsscfgidx);
-+	memcpy(p, &bsscfgidx_le, sizeof(bsscfgidx_le));
-+	p += sizeof(bsscfgidx_le);
- 
- 	/* parameter buffer follows */
- 	if (datalen)
-@@ -347,12 +347,12 @@ brcmf_fil_bsscfg_data_set(struct brcmf_i
- 
- 	mutex_lock(&drvr->proto_block);
- 
--	brcmf_dbg(FIL, "ifidx=%d, bssidx=%d, name=%s, len=%d\n", ifp->ifidx,
--		  ifp->bssidx, name, len);
-+	brcmf_dbg(FIL, "ifidx=%d, bsscfgidx=%d, name=%s, len=%d\n", ifp->ifidx,
-+		  ifp->bsscfgidx, name, len);
- 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
- 			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
- 
--	buflen = brcmf_create_bsscfg(ifp->bssidx, name, data, len,
-+	buflen = brcmf_create_bsscfg(ifp->bsscfgidx, name, data, len,
- 				     drvr->proto_buf, sizeof(drvr->proto_buf));
- 	if (buflen) {
- 		err = brcmf_fil_cmd_data(ifp, BRCMF_C_SET_VAR, drvr->proto_buf,
-@@ -376,7 +376,7 @@ brcmf_fil_bsscfg_data_get(struct brcmf_i
- 
- 	mutex_lock(&drvr->proto_block);
- 
--	buflen = brcmf_create_bsscfg(ifp->bssidx, name, data, len,
-+	buflen = brcmf_create_bsscfg(ifp->bsscfgidx, name, data, len,
- 				     drvr->proto_buf, sizeof(drvr->proto_buf));
- 	if (buflen) {
- 		err = brcmf_fil_cmd_data(ifp, BRCMF_C_GET_VAR, drvr->proto_buf,
-@@ -387,8 +387,8 @@ brcmf_fil_bsscfg_data_get(struct brcmf_i
- 		err = -EPERM;
- 		brcmf_err("Creating bsscfg failed\n");
- 	}
--	brcmf_dbg(FIL, "ifidx=%d, bssidx=%d, name=%s, len=%d\n", ifp->ifidx,
--		  ifp->bssidx, name, len);
-+	brcmf_dbg(FIL, "ifidx=%d, bsscfgidx=%d, name=%s, len=%d\n", ifp->ifidx,
-+		  ifp->bsscfgidx, name, len);
- 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
- 			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -170,7 +170,7 @@ struct brcmf_fil_af_params_le {
- };
- 
- struct brcmf_fil_bss_enable_le {
--	__le32 bsscfg_idx;
-+	__le32 bsscfgidx;
- 	__le32 enable;
- };
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -719,7 +719,7 @@ static void brcmf_fws_macdesc_init(struc
- 	desc->state = BRCMF_FWS_STATE_OPEN;
- 	desc->requested_credit = 0;
- 	desc->requested_packet = 0;
--	/* depending on use may need ifp->bssidx instead */
-+	/* depending on use may need ifp->bsscfgidx instead */
- 	desc->interface_id = ifidx;
- 	desc->ac_bitmap = 0xff; /* update this when handling APSD */
- 	if (addr)
-@@ -1938,7 +1938,7 @@ void brcmf_fws_reset_interface(struct br
- {
- 	struct brcmf_fws_mac_descriptor *entry = ifp->fws_desc;
- 
--	brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx);
-+	brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
- 	if (!entry)
- 		return;
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2067,7 +2067,7 @@ static struct wireless_dev *brcmf_p2p_cr
- 	struct brcmf_if *p2p_ifp;
- 	struct brcmf_if *pri_ifp;
- 	int err;
--	u32 bssidx;
-+	u32 bsscfgidx;
- 
- 	if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
- 		return ERR_PTR(-ENOSPC);
-@@ -2113,13 +2113,13 @@ static struct wireless_dev *brcmf_p2p_cr
- 	memcpy(&p2p_vif->wdev.address, p2p->dev_addr, sizeof(p2p->dev_addr));
- 
- 	/* verify bsscfg index for P2P discovery */
--	err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
-+	err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bsscfgidx);
- 	if (err < 0) {
- 		brcmf_err("retrieving discover bsscfg index failed\n");
- 		goto fail;
- 	}
- 
--	WARN_ON(p2p_ifp->bssidx != bssidx);
-+	WARN_ON(p2p_ifp->bsscfgidx != bsscfgidx);
- 
- 	init_completion(&p2p->send_af_done);
- 	INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
diff --git a/package/kernel/mac80211/patches/374-0008-brcmfmac-Use-new-methods-for-pcie-Power-Management.patch b/package/kernel/mac80211/patches/374-0008-brcmfmac-Use-new-methods-for-pcie-Power-Management.patch
deleted file mode 100644
index fb2b85e46c..0000000000
--- a/package/kernel/mac80211/patches/374-0008-brcmfmac-Use-new-methods-for-pcie-Power-Management.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:18 +0100
-Subject: [PATCH] brcmfmac: Use new methods for pcie Power Management.
-
-Currently the legacy methods suspend and resume are used for pcie
-devices. This is not the preferable method and is also causing
-issues with some setups when doing hibernate. Changing this to
-use the new PM methods.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1388,10 +1388,6 @@ static void brcmf_pcie_wowl_config(struc
- 
- 	brcmf_dbg(PCIE, "Configuring WOWL, enabled=%d\n", enabled);
- 	devinfo->wowl_enabled = enabled;
--	if (enabled)
--		device_set_wakeup_enable(&devinfo->pdev->dev, true);
--	else
--		device_set_wakeup_enable(&devinfo->pdev->dev, false);
- }
- 
- 
-@@ -1961,15 +1957,14 @@ brcmf_pcie_remove(struct pci_dev *pdev)
- #ifdef CONFIG_PM
- 
- 
--static int brcmf_pcie_suspend(struct pci_dev *pdev, pm_message_t state)
-+static int brcmf_pcie_pm_enter_D3(struct device *dev)
- {
- 	struct brcmf_pciedev_info *devinfo;
- 	struct brcmf_bus *bus;
--	int err;
- 
--	brcmf_dbg(PCIE, "Enter, state=%d, pdev=%p\n", state.event, pdev);
-+	brcmf_err("Enter\n");
- 
--	bus = dev_get_drvdata(&pdev->dev);
-+	bus = dev_get_drvdata(dev);
- 	devinfo = bus->bus_priv.pcie->devinfo;
- 
- 	brcmf_bus_change_state(bus, BRCMF_BUS_DOWN);
-@@ -1984,62 +1979,45 @@ static int brcmf_pcie_suspend(struct pci
- 		brcmf_err("Timeout on response for entering D3 substate\n");
- 		return -EIO;
- 	}
--	brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D0_INFORM_IN_USE);
- 
--	err = pci_save_state(pdev);
--	if (err)
--		brcmf_err("pci_save_state failed, err=%d\n", err);
--	if ((err) || (!devinfo->wowl_enabled)) {
--		brcmf_chip_detach(devinfo->ci);
--		devinfo->ci = NULL;
--		brcmf_pcie_remove(pdev);
--		return 0;
--	}
-+	devinfo->state = BRCMFMAC_PCIE_STATE_DOWN;
- 
--	return pci_prepare_to_sleep(pdev);
-+	return 0;
- }
- 
--static int brcmf_pcie_resume(struct pci_dev *pdev)
-+
-+static int brcmf_pcie_pm_leave_D3(struct device *dev)
- {
- 	struct brcmf_pciedev_info *devinfo;
- 	struct brcmf_bus *bus;
-+	struct pci_dev *pdev;
- 	int err;
- 
--	bus = dev_get_drvdata(&pdev->dev);
--	brcmf_dbg(PCIE, "Enter, pdev=%p, bus=%p\n", pdev, bus);
-+	brcmf_err("Enter\n");
- 
--	err = pci_set_power_state(pdev, PCI_D0);
--	if (err) {
--		brcmf_err("pci_set_power_state failed, err=%d\n", err);
--		goto cleanup;
--	}
--	pci_restore_state(pdev);
--	pci_enable_wake(pdev, PCI_D3hot, false);
--	pci_enable_wake(pdev, PCI_D3cold, false);
-+	bus = dev_get_drvdata(dev);
-+	devinfo = bus->bus_priv.pcie->devinfo;
-+	brcmf_dbg(PCIE, "Enter, dev=%p, bus=%p\n", dev, bus);
- 
- 	/* Check if device is still up and running, if so we are ready */
--	if (bus) {
--		devinfo = bus->bus_priv.pcie->devinfo;
--		if (brcmf_pcie_read_reg32(devinfo,
--					  BRCMF_PCIE_PCIE2REG_INTMASK) != 0) {
--			if (brcmf_pcie_send_mb_data(devinfo,
--						    BRCMF_H2D_HOST_D0_INFORM))
--				goto cleanup;
--			brcmf_dbg(PCIE, "Hot resume, continue....\n");
--			brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--			brcmf_bus_change_state(bus, BRCMF_BUS_UP);
--			brcmf_pcie_intr_enable(devinfo);
--			return 0;
--		}
-+	if (brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_INTMASK) != 0) {
-+		brcmf_dbg(PCIE, "Try to wakeup device....\n");
-+		if (brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D0_INFORM))
-+			goto cleanup;
-+		brcmf_dbg(PCIE, "Hot resume, continue....\n");
-+		devinfo->state = BRCMFMAC_PCIE_STATE_UP;
-+		brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
-+		brcmf_bus_change_state(bus, BRCMF_BUS_UP);
-+		brcmf_pcie_intr_enable(devinfo);
-+		return 0;
- 	}
- 
- cleanup:
--	if (bus) {
--		devinfo = bus->bus_priv.pcie->devinfo;
--		brcmf_chip_detach(devinfo->ci);
--		devinfo->ci = NULL;
--		brcmf_pcie_remove(pdev);
--	}
-+	brcmf_chip_detach(devinfo->ci);
-+	devinfo->ci = NULL;
-+	pdev = devinfo->pdev;
-+	brcmf_pcie_remove(pdev);
-+
- 	err = brcmf_pcie_probe(pdev, NULL);
- 	if (err)
- 		brcmf_err("probe after resume failed, err=%d\n", err);
-@@ -2048,6 +2026,14 @@ cleanup:
- }
- 
- 
-+static const struct dev_pm_ops brcmf_pciedrvr_pm = {
-+	.suspend = brcmf_pcie_pm_enter_D3,
-+	.resume = brcmf_pcie_pm_leave_D3,
-+	.freeze = brcmf_pcie_pm_enter_D3,
-+	.restore = brcmf_pcie_pm_leave_D3,
-+};
-+
-+
- #endif /* CONFIG_PM */
- 
- 
-@@ -2086,9 +2072,8 @@ static struct pci_driver brcmf_pciedrvr
- 	.probe = brcmf_pcie_probe,
- 	.remove = brcmf_pcie_remove,
- #ifdef CONFIG_PM
--	.suspend = brcmf_pcie_suspend,
--	.resume = brcmf_pcie_resume
--#endif /* CONFIG_PM */
-+	.driver.pm = &brcmf_pciedrvr_pm,
-+#endif
- };
- 
- 
diff --git a/package/kernel/mac80211/patches/374-0009-brcmfmac-Add-wowl-wake-indication-report.patch b/package/kernel/mac80211/patches/374-0009-brcmfmac-Add-wowl-wake-indication-report.patch
deleted file mode 100644
index 4324cc70c4..0000000000
--- a/package/kernel/mac80211/patches/374-0009-brcmfmac-Add-wowl-wake-indication-report.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 29 Oct 2015 20:33:19 +0100
-Subject: [PATCH] brcmfmac: Add wowl wake indication report.
-
-On wakeup of the system (resume) a wowl wakeup indication report
-can be sent to cfg80211. This patch adds support for this. The
-report specifies if the device was responsible for the wakeup
-and if so, will specify the exact reason.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -3061,6 +3061,67 @@ static s32 brcmf_config_wowl_pattern(str
- 	return ret;
- }
- 
-+#ifdef CPTCFG_PM
-+
-+static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp)
-+{
-+	struct brcmf_wowl_wakeind_le wake_ind_le;
-+	struct cfg80211_wowlan_wakeup wakeup_data;
-+	struct cfg80211_wowlan_wakeup *wakeup;
-+	u32 wakeind;
-+	s32 err;
-+
-+	err = brcmf_fil_iovar_data_get(ifp, "wowl_wakeind", &wake_ind_le,
-+				       sizeof(wake_ind_le));
-+	if (!err) {
-+		brcmf_err("Get wowl_wakeind failed, err = %d\n", err);
-+		return;
-+	}
-+
-+	wakeind = le32_to_cpu(wake_ind_le.ucode_wakeind);
-+	if (wakeind & (BRCMF_WOWL_MAGIC | BRCMF_WOWL_DIS | BRCMF_WOWL_BCN |
-+		       BRCMF_WOWL_RETR | BRCMF_WOWL_NET)) {
-+		wakeup = &wakeup_data;
-+		memset(&wakeup_data, 0, sizeof(wakeup_data));
-+		wakeup_data.pattern_idx = -1;
-+
-+		if (wakeind & BRCMF_WOWL_MAGIC) {
-+			brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_MAGIC\n");
-+			wakeup_data.magic_pkt = true;
-+		}
-+		if (wakeind & BRCMF_WOWL_DIS) {
-+			brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_DIS\n");
-+			wakeup_data.disconnect = true;
-+		}
-+		if (wakeind & BRCMF_WOWL_BCN) {
-+			brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_BCN\n");
-+			wakeup_data.disconnect = true;
-+		}
-+		if (wakeind & BRCMF_WOWL_RETR) {
-+			brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_RETR\n");
-+			wakeup_data.disconnect = true;
-+		}
-+		if (wakeind & BRCMF_WOWL_NET) {
-+			brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_NET\n");
-+			/* For now always map to pattern 0, no API to get
-+			 * correct information available at the moment.
-+			 */
-+			wakeup_data.pattern_idx = 0;
-+		}
-+	} else {
-+		wakeup = NULL;
-+	}
-+	cfg80211_report_wowlan_wakeup(&ifp->vif->wdev, wakeup, GFP_KERNEL);
-+}
-+
-+#else
-+
-+static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp)
-+{
-+}
-+
-+#endif /* CPTCFG_PM */
-+
- static s32 brcmf_cfg80211_resume(struct wiphy *wiphy)
- {
- 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-@@ -3070,11 +3131,12 @@ static s32 brcmf_cfg80211_resume(struct
- 	brcmf_dbg(TRACE, "Enter\n");
- 
- 	if (cfg->wowl_enabled) {
-+		brcmf_report_wowl_wakeind(wiphy, ifp);
-+		brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
-+		brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0);
- 		brcmf_configure_arp_offload(ifp, true);
- 		brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM,
- 				      cfg->pre_wowl_pmmode);
--		brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
--		brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0);
- 		cfg->wowl_enabled = false;
- 	}
- 	return 0;
-@@ -3108,6 +3170,7 @@ static void brcmf_configure_wowl(struct
- 				wowl->patterns[i].pkt_offset);
- 		}
- 	}
-+	brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", "clear", strlen("clear"));
- 	brcmf_fil_iovar_int_set(ifp, "wowl", wowl_config);
- 	brcmf_fil_iovar_int_set(ifp, "wowl_activate", 1);
- 	brcmf_bus_wowl_config(cfg->pub->bus_if, true);
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -634,4 +634,16 @@ struct brcmf_assoclist_le {
- 	u8 mac[BRCMF_MAX_ASSOCLIST][ETH_ALEN];
- };
- 
-+/**
-+ * struct brcmf_wowl_wakeind_le - Wakeup indicators
-+ *	Note: note both fields contain same information.
-+ *
-+ * @pci_wakeind: Whether PCI PMECSR PMEStatus bit was set.
-+ * @ucode_wakeind: What wakeup-event indication was set by ucode
-+ */
-+struct brcmf_wowl_wakeind_le {
-+	__le32 pci_wakeind;
-+	__le32 ucode_wakeind;
-+};
-+
- #endif /* FWIL_TYPES_H_ */
diff --git a/package/kernel/mac80211/patches/375-brcmfmac-constify-brcmf_bus_ops-structures.patch b/package/kernel/mac80211/patches/375-brcmfmac-constify-brcmf_bus_ops-structures.patch
deleted file mode 100644
index a0cc231de7..0000000000
--- a/package/kernel/mac80211/patches/375-brcmfmac-constify-brcmf_bus_ops-structures.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Julia Lawall <Julia.Lawall@lip6.fr>
-Date: Sat, 14 Nov 2015 17:22:07 +0100
-Subject: [PATCH] brcmfmac: constify brcmf_bus_ops structures
-
-The brcmf_bus_ops structures are never modified, so declare them as const.
-
-Done with the help of Coccinelle.
-
-Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bus.h
-@@ -137,7 +137,7 @@ struct brcmf_bus {
- 	bool always_use_fws_queue;
- 	bool wowl_supported;
- 
--	struct brcmf_bus_ops *ops;
-+	const struct brcmf_bus_ops *ops;
- 	struct brcmf_bus_msgbuf *msgbuf;
- };
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1413,7 +1413,7 @@ static int brcmf_pcie_get_memdump(struct
- }
- 
- 
--static struct brcmf_bus_ops brcmf_pcie_bus_ops = {
-+static const struct brcmf_bus_ops brcmf_pcie_bus_ops = {
- 	.txdata = brcmf_pcie_tx,
- 	.stop = brcmf_pcie_down,
- 	.txctl = brcmf_pcie_tx_ctlpkt,
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -4025,7 +4025,7 @@ brcmf_sdio_watchdog(unsigned long data)
- 	}
- }
- 
--static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
-+static const struct brcmf_bus_ops brcmf_sdio_bus_ops = {
- 	.stop = brcmf_sdio_bus_stop,
- 	.preinit = brcmf_sdio_bus_preinit,
- 	.txdata = brcmf_sdio_bus_txdata,
---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-@@ -1163,7 +1163,7 @@ static void brcmf_usb_wowl_config(struct
- 		device_set_wakeup_enable(devinfo->dev, false);
- }
- 
--static struct brcmf_bus_ops brcmf_usb_bus_ops = {
-+static const struct brcmf_bus_ops brcmf_usb_bus_ops = {
- 	.txdata = brcmf_usb_tx,
- 	.stop = brcmf_usb_down,
- 	.txctl = brcmf_usb_tx_ctlpkt,
diff --git a/package/kernel/mac80211/patches/376-0001-brcmfmac-Cleanup-ssid-storage.patch b/package/kernel/mac80211/patches/376-0001-brcmfmac-Cleanup-ssid-storage.patch
deleted file mode 100644
index 83f1ebe907..0000000000
--- a/package/kernel/mac80211/patches/376-0001-brcmfmac-Cleanup-ssid-storage.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:37 +0100
-Subject: [PATCH] brcmfmac: Cleanup ssid storage.
-
-SSIDs used for connect and p2p got stored, but never used.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -959,7 +959,7 @@ brcmf_run_escan(struct brcmf_cfg80211_in
- 		params_size += sizeof(u32) * ((request->n_channels + 1) / 2);
- 
- 		/* Allocate space for populating ssids in struct */
--		params_size += sizeof(struct brcmf_ssid) * request->n_ssids;
-+		params_size += sizeof(struct brcmf_ssid_le) * request->n_ssids;
- 	}
- 
- 	params = kzalloc(params_size, GFP_KERNEL);
-@@ -1291,6 +1291,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
- 	s32 wsec = 0;
- 	s32 bcnprd;
- 	u16 chanspec;
-+	u32 ssid_len;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
- 	if (!check_vif_up(ifp->vif))
-@@ -1368,17 +1369,15 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
- 	memset(&join_params, 0, sizeof(struct brcmf_join_params));
- 
- 	/* SSID */
--	profile->ssid.SSID_len = min_t(u32, params->ssid_len, 32);
--	memcpy(profile->ssid.SSID, params->ssid, profile->ssid.SSID_len);
--	memcpy(join_params.ssid_le.SSID, params->ssid, profile->ssid.SSID_len);
--	join_params.ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len);
-+	ssid_len = min_t(u32, params->ssid_len, IEEE80211_MAX_SSID_LEN);
-+	memcpy(join_params.ssid_le.SSID, params->ssid, ssid_len);
-+	join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len);
- 	join_params_size = sizeof(join_params.ssid_le);
- 
- 	/* BSSID */
- 	if (params->bssid) {
- 		memcpy(join_params.params_le.bssid, params->bssid, ETH_ALEN);
--		join_params_size = sizeof(join_params.ssid_le) +
--				   BRCMF_ASSOC_PARAMS_FIXED_SIZE;
-+		join_params_size += BRCMF_ASSOC_PARAMS_FIXED_SIZE;
- 		memcpy(profile->bssid, params->bssid, ETH_ALEN);
- 	} else {
- 		eth_broadcast_addr(join_params.params_le.bssid);
-@@ -1728,7 +1727,6 @@ brcmf_cfg80211_connect(struct wiphy *wip
- {
- 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- 	struct brcmf_if *ifp = netdev_priv(ndev);
--	struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
- 	struct ieee80211_channel *chan = sme->channel;
- 	struct brcmf_join_params join_params;
- 	size_t join_params_size;
-@@ -1739,6 +1737,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- 	struct brcmf_ext_join_params_le *ext_join_params;
- 	u16 chanspec;
- 	s32 err = 0;
-+	u32 ssid_len;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
- 	if (!check_vif_up(ifp->vif))
-@@ -1824,15 +1823,6 @@ brcmf_cfg80211_connect(struct wiphy *wip
- 		goto done;
- 	}
- 
--	profile->ssid.SSID_len = min_t(u32, (u32)sizeof(profile->ssid.SSID),
--				       (u32)sme->ssid_len);
--	memcpy(&profile->ssid.SSID, sme->ssid, profile->ssid.SSID_len);
--	if (profile->ssid.SSID_len < IEEE80211_MAX_SSID_LEN) {
--		profile->ssid.SSID[profile->ssid.SSID_len] = 0;
--		brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n", profile->ssid.SSID,
--			  profile->ssid.SSID_len);
--	}
--
- 	/* Join with specific BSSID and cached SSID
- 	 * If SSID is zero join based on BSSID only
- 	 */
-@@ -1845,9 +1835,12 @@ brcmf_cfg80211_connect(struct wiphy *wip
- 		err = -ENOMEM;
- 		goto done;
- 	}
--	ext_join_params->ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len);
--	memcpy(&ext_join_params->ssid_le.SSID, sme->ssid,
--	       profile->ssid.SSID_len);
-+	ssid_len = min_t(u32, sme->ssid_len, IEEE80211_MAX_SSID_LEN);
-+	ext_join_params->ssid_le.SSID_len = cpu_to_le32(ssid_len);
-+	memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, ssid_len);
-+	if (ssid_len < IEEE80211_MAX_SSID_LEN)
-+		brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n",
-+			  ext_join_params->ssid_le.SSID, ssid_len);
- 
- 	/* Set up join scan parameters */
- 	ext_join_params->scan_le.scan_type = -1;
-@@ -1895,8 +1888,8 @@ brcmf_cfg80211_connect(struct wiphy *wip
- 	memset(&join_params, 0, sizeof(join_params));
- 	join_params_size = sizeof(join_params.ssid_le);
- 
--	memcpy(&join_params.ssid_le.SSID, sme->ssid, profile->ssid.SSID_len);
--	join_params.ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len);
-+	memcpy(&join_params.ssid_le.SSID, sme->ssid, ssid_len);
-+	join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len);
- 
- 	if (sme->bssid)
- 		memcpy(join_params.params_le.bssid, sme->bssid, ETH_ALEN);
-@@ -2775,9 +2768,7 @@ CleanUp:
- static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg,
- 				 struct brcmf_if *ifp)
- {
--	struct brcmf_cfg80211_profile *profile = ndev_to_prof(ifp->ndev);
- 	struct brcmf_bss_info_le *bi;
--	struct brcmf_ssid *ssid;
- 	const struct brcmf_tlv *tim;
- 	u16 beacon_interval;
- 	u8 dtim_period;
-@@ -2789,8 +2780,6 @@ static s32 brcmf_update_bss_info(struct
- 	if (brcmf_is_ibssmode(ifp->vif))
- 		return err;
- 
--	ssid = &profile->ssid;
--
- 	*(__le32 *)cfg->extra_buf = cpu_to_le32(WL_EXTRA_BUF_MAX);
- 	err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO,
- 				     cfg->extra_buf, WL_EXTRA_BUF_MAX);
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-@@ -124,13 +124,11 @@ struct brcmf_cfg80211_security {
- /**
-  * struct brcmf_cfg80211_profile - profile information.
-  *
-- * @ssid: ssid of associated/associating ap.
-  * @bssid: bssid of joined/joining ibss.
-  * @sec: security information.
-  * @key: key information
-  */
- struct brcmf_cfg80211_profile {
--	struct brcmf_ssid ssid;
- 	u8 bssid[ETH_ALEN];
- 	struct brcmf_cfg80211_security sec;
- 	struct brcmf_wsec_key key[BRCMF_MAX_DEFAULT_KEYS];
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -282,14 +282,9 @@ struct brcm_rateset_le {
- 	u8 rates[BRCMF_MAXRATES_IN_SET];
- };
- 
--struct brcmf_ssid {
--	u32 SSID_len;
--	unsigned char SSID[32];
--};
--
- struct brcmf_ssid_le {
- 	__le32 SSID_len;
--	unsigned char SSID[32];
-+	unsigned char SSID[IEEE80211_MAX_SSID_LEN];
- };
- 
- struct brcmf_scan_params_le {
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -642,7 +642,6 @@ static s32 brcmf_p2p_escan(struct brcmf_
- 	struct brcmf_cfg80211_vif *vif;
- 	struct brcmf_p2p_scan_le *p2p_params;
- 	struct brcmf_scan_params_le *sparams;
--	struct brcmf_ssid ssid;
- 
- 	memsize += num_chans * sizeof(__le16);
- 	memblk = kzalloc(memsize, GFP_KERNEL);
-@@ -655,16 +654,16 @@ static s32 brcmf_p2p_escan(struct brcmf_
- 		ret = -EINVAL;
- 		goto exit;
- 	}
-+	p2p_params = (struct brcmf_p2p_scan_le *)memblk;
-+	sparams = &p2p_params->eparams.params_le;
- 
- 	switch (search_state) {
- 	case WL_P2P_DISC_ST_SEARCH:
- 		/*
- 		 * If we in SEARCH STATE, we don't need to set SSID explictly
--		 * because dongle use P2P WILDCARD internally by default
-+		 * because dongle use P2P WILDCARD internally by default, use
-+		 * null ssid, which it is already due to kzalloc.
- 		 */
--		/* use null ssid */
--		ssid.SSID_len = 0;
--		memset(ssid.SSID, 0, sizeof(ssid.SSID));
- 		break;
- 	case WL_P2P_DISC_ST_SCAN:
- 		/*
-@@ -673,8 +672,10 @@ static s32 brcmf_p2p_escan(struct brcmf_
- 		 * P2P WILDCARD because we just do broadcast scan unless
- 		 * setting SSID.
- 		 */
--		ssid.SSID_len = BRCMF_P2P_WILDCARD_SSID_LEN;
--		memcpy(ssid.SSID, BRCMF_P2P_WILDCARD_SSID, ssid.SSID_len);
-+		sparams->ssid_le.SSID_len =
-+				cpu_to_le32(BRCMF_P2P_WILDCARD_SSID_LEN);
-+		memcpy(sparams->ssid_le.SSID, BRCMF_P2P_WILDCARD_SSID,
-+		       BRCMF_P2P_WILDCARD_SSID_LEN);
- 		break;
- 	default:
- 		brcmf_err(" invalid search state %d\n", search_state);
-@@ -687,11 +688,9 @@ static s32 brcmf_p2p_escan(struct brcmf_
- 	/*
- 	 * set p2p scan parameters.
- 	 */
--	p2p_params = (struct brcmf_p2p_scan_le *)memblk;
- 	p2p_params->type = 'E';
- 
- 	/* determine the scan engine parameters */
--	sparams = &p2p_params->eparams.params_le;
- 	sparams->bss_type = DOT11_BSSTYPE_ANY;
- 	if (p2p->cfg->active_scan)
- 		sparams->scan_type = 0;
-@@ -699,9 +698,6 @@ static s32 brcmf_p2p_escan(struct brcmf_
- 		sparams->scan_type = 1;
- 
- 	eth_broadcast_addr(sparams->bssid);
--	if (ssid.SSID_len)
--		memcpy(sparams->ssid_le.SSID, ssid.SSID, ssid.SSID_len);
--	sparams->ssid_le.SSID_len = cpu_to_le32(ssid.SSID_len);
- 	sparams->home_time = cpu_to_le32(P2PAPI_SCAN_HOME_TIME_MS);
- 
- 	/*
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
-@@ -112,7 +112,6 @@ struct afx_hdl {
-  * @int_addr: P2P interface address.
-  * @bss_idx: informate for P2P bss types.
-  * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state.
-- * @ssid: ssid for P2P GO.
-  * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state.
-  * @remain_on_channel: contains copy of struct used by cfg80211.
-  * @remain_on_channel_cookie: cookie counter for remain on channel cmd
-@@ -133,7 +132,6 @@ struct brcmf_p2p_info {
- 	u8 int_addr[ETH_ALEN];
- 	struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX];
- 	struct timer_list listen_timer;
--	struct brcmf_ssid ssid;
- 	u8 listen_channel;
- 	struct ieee80211_channel remain_on_channel;
- 	u32 remain_on_channel_cookie;
diff --git a/package/kernel/mac80211/patches/376-0002-brcmfmac-Return-actual-error-by-fwil.patch b/package/kernel/mac80211/patches/376-0002-brcmfmac-Return-actual-error-by-fwil.patch
deleted file mode 100644
index 8672c18f6b..0000000000
--- a/package/kernel/mac80211/patches/376-0002-brcmfmac-Return-actual-error-by-fwil.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:38 +0100
-Subject: [PATCH] brcmfmac: Return actual error by fwil.
-
-FWIL is always mapping back errors to EBADE. This is not very
-conventient when trying to understand problems by reading logs.
-Some callers print the error code, but that is quite useless
-when the exact error code is not returned. It also makes it
-impossible to differentiate based on error code. This patch
-changes the return of EBADE into the actual error code.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
-@@ -126,7 +126,8 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp,
- 
- 	brcmf_dbg(FIL, "Failed: %s (%d)\n",
- 		  brcmf_fil_get_errstr((u32)(-err)), err);
--	return -EBADE;
-+
-+	return err;
- }
- 
- s32
diff --git a/package/kernel/mac80211/patches/376-0003-brcmfmac-Change-error-print-on-wlan0-existence.patch b/package/kernel/mac80211/patches/376-0003-brcmfmac-Change-error-print-on-wlan0-existence.patch
deleted file mode 100644
index 1cfab2157d..0000000000
--- a/package/kernel/mac80211/patches/376-0003-brcmfmac-Change-error-print-on-wlan0-existence.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:39 +0100
-Subject: [PATCH] brcmfmac: Change error print on wlan0 existence.
-
-During initialization of the device, but also on some other
-moments the driver prints an error that the netdev already exists.
-This is a result of the way the driver is initializing the
-firmware and not really an error. The code is not treating it as
-an error either. This error print has resulted in many questions
-by users and is confusing and incorrect. This patch changes the
-error log into a debug info log.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -811,14 +811,15 @@ struct brcmf_if *brcmf_add_if(struct brc
- 	 * in case we missed the BRCMF_E_IF_DEL event.
- 	 */
- 	if (ifp) {
--		brcmf_err("ERROR: netdev:%s already exists\n",
--			  ifp->ndev->name);
- 		if (ifidx) {
-+			brcmf_err("ERROR: netdev:%s already exists\n",
-+				  ifp->ndev->name);
- 			netif_stop_queue(ifp->ndev);
- 			brcmf_net_detach(ifp->ndev);
- 			drvr->iflist[bsscfgidx] = NULL;
- 		} else {
--			brcmf_err("ignore IF event\n");
-+			brcmf_dbg(INFO, "netdev:%s ignore IF event\n",
-+				  ifp->ndev->name);
- 			return ERR_PTR(-EINVAL);
- 		}
- 	}
diff --git a/package/kernel/mac80211/patches/376-0004-brcmfmac-no-retries-on-rxglom-superframe-errors.patch b/package/kernel/mac80211/patches/376-0004-brcmfmac-no-retries-on-rxglom-superframe-errors.patch
deleted file mode 100644
index dfc3a983bd..0000000000
--- a/package/kernel/mac80211/patches/376-0004-brcmfmac-no-retries-on-rxglom-superframe-errors.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:40 +0100
-Subject: [PATCH] brcmfmac: no retries on rxglom superframe errors
-
-Aborting the current read attempt on the superframe also removes the
-packet from the pipeline. Retries should not be attempted on the next
-packet since it would not be a superframe(either a superframe descriptor
-or other data packet) and should not be handled by brcmf_sdio_rxglom
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -460,7 +460,6 @@ struct brcmf_sdio {
- 
- 	struct sk_buff *glomd;	/* Packet containing glomming descriptor */
- 	struct sk_buff_head glom; /* Packet list for glommed superframe */
--	uint glomerr;		/* Glom packet read errors */
- 
- 	u8 *rxbuf;		/* Buffer for receiving control packets */
- 	uint rxblen;		/* Allocated length of rxbuf */
-@@ -1654,20 +1653,15 @@ static u8 brcmf_sdio_rxglom(struct brcmf
- 		sdio_release_host(bus->sdiodev->func[1]);
- 		bus->sdcnt.f2rxdata++;
- 
--		/* On failure, kill the superframe, allow a couple retries */
-+		/* On failure, kill the superframe */
- 		if (errcode < 0) {
- 			brcmf_err("glom read of %d bytes failed: %d\n",
- 				  dlen, errcode);
- 
- 			sdio_claim_host(bus->sdiodev->func[1]);
--			if (bus->glomerr++ < 3) {
--				brcmf_sdio_rxfail(bus, true, true);
--			} else {
--				bus->glomerr = 0;
--				brcmf_sdio_rxfail(bus, true, false);
--				bus->sdcnt.rxglomfail++;
--				brcmf_sdio_free_glom(bus);
--			}
-+			brcmf_sdio_rxfail(bus, true, false);
-+			bus->sdcnt.rxglomfail++;
-+			brcmf_sdio_free_glom(bus);
- 			sdio_release_host(bus->sdiodev->func[1]);
- 			return 0;
- 		}
-@@ -1708,19 +1702,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf
- 		}
- 
- 		if (errcode) {
--			/* Terminate frame on error, request
--				 a couple retries */
-+			/* Terminate frame on error */
- 			sdio_claim_host(bus->sdiodev->func[1]);
--			if (bus->glomerr++ < 3) {
--				/* Restore superframe header space */
--				skb_push(pfirst, sfdoff);
--				brcmf_sdio_rxfail(bus, true, true);
--			} else {
--				bus->glomerr = 0;
--				brcmf_sdio_rxfail(bus, true, false);
--				bus->sdcnt.rxglomfail++;
--				brcmf_sdio_free_glom(bus);
--			}
-+			brcmf_sdio_rxfail(bus, true, false);
-+			bus->sdcnt.rxglomfail++;
-+			brcmf_sdio_free_glom(bus);
- 			sdio_release_host(bus->sdiodev->func[1]);
- 			bus->cur_read.len = 0;
- 			return 0;
diff --git a/package/kernel/mac80211/patches/376-0005-brcmfmac-Remove-redundant-parameter-action-from-scan.patch b/package/kernel/mac80211/patches/376-0005-brcmfmac-Remove-redundant-parameter-action-from-scan.patch
deleted file mode 100644
index ede1f47984..0000000000
--- a/package/kernel/mac80211/patches/376-0005-brcmfmac-Remove-redundant-parameter-action-from-scan.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:41 +0100
-Subject: [PATCH] brcmfmac: Remove redundant parameter action from scan.
-
-ESCAN is always performed using action start scan. No need to
-pass this parameter on to different functions.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -945,7 +945,7 @@ static void brcmf_escan_prep(struct brcm
- 
- static s32
- brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
--		struct cfg80211_scan_request *request, u16 action)
-+		struct cfg80211_scan_request *request)
- {
- 	s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE +
- 			  offsetof(struct brcmf_escan_params_le, params_le);
-@@ -970,7 +970,7 @@ brcmf_run_escan(struct brcmf_cfg80211_in
- 	BUG_ON(params_size + sizeof("escan") >= BRCMF_DCMD_MEDLEN);
- 	brcmf_escan_prep(cfg, &params->params_le, request);
- 	params->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
--	params->action = cpu_to_le16(action);
-+	params->action = cpu_to_le16(WL_ESCAN_ACTION_START);
- 	params->sync_id = cpu_to_le16(0x1234);
- 
- 	err = brcmf_fil_iovar_data_set(ifp, "escan", params, params_size);
-@@ -1012,7 +1012,7 @@ brcmf_do_escan(struct brcmf_cfg80211_inf
- 	results->count = 0;
- 	results->buflen = WL_ESCAN_RESULTS_FIXED_SIZE;
- 
--	err = escan->run(cfg, ifp, request, WL_ESCAN_ACTION_START);
-+	err = escan->run(cfg, ifp, request);
- 	if (err)
- 		brcmf_scan_config_mpc(ifp, 1);
- 	return err;
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-@@ -231,7 +231,7 @@ struct escan_info {
- 	struct wiphy *wiphy;
- 	struct brcmf_if *ifp;
- 	s32 (*run)(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
--		   struct cfg80211_scan_request *request, u16 action);
-+		   struct cfg80211_scan_request *request);
- };
- 
- /**
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -625,11 +625,10 @@ exit:
-  * @num_chans: number of channels to scan.
-  * @chanspecs: channel parameters for @num_chans channels.
-  * @search_state: P2P discover state to use.
-- * @action: scan action to pass to firmware.
-  * @bss_type: type of P2P bss.
-  */
- static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
--			   u16 chanspecs[], s32 search_state, u16 action,
-+			   u16 chanspecs[], s32 search_state,
- 			   enum p2p_bss_type bss_type)
- {
- 	s32 ret = 0;
-@@ -738,7 +737,7 @@ static s32 brcmf_p2p_escan(struct brcmf_
- 
- 	/* set the escan specific parameters */
- 	p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
--	p2p_params->eparams.action =  cpu_to_le16(action);
-+	p2p_params->eparams.action =  cpu_to_le16(WL_ESCAN_ACTION_START);
- 	p2p_params->eparams.sync_id = cpu_to_le16(0x1234);
- 	/* perform p2p scan on primary device */
- 	ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize);
-@@ -762,8 +761,7 @@ exit:
-  */
- static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg,
- 			       struct brcmf_if *ifp,
--			       struct cfg80211_scan_request *request,
--			       u16 action)
-+			       struct cfg80211_scan_request *request)
- {
- 	struct brcmf_p2p_info *p2p = &cfg->p2p;
- 	s32 err = 0;
-@@ -823,7 +821,7 @@ static s32 brcmf_p2p_run_escan(struct br
- 			num_nodfs++;
- 		}
- 		err = brcmf_p2p_escan(p2p, num_nodfs, chanspecs, search_state,
--				      action, P2PAPI_BSSCFG_DEVICE);
-+				      P2PAPI_BSSCFG_DEVICE);
- 		kfree(chanspecs);
- 	}
- exit:
-@@ -1092,8 +1090,7 @@ static s32 brcmf_p2p_act_frm_search(stru
- 		default_chan_list[2] = ch.chspec;
- 	}
- 	err = brcmf_p2p_escan(p2p, channel_cnt, default_chan_list,
--			      WL_P2P_DISC_ST_SEARCH, WL_ESCAN_ACTION_START,
--			      P2PAPI_BSSCFG_DEVICE);
-+			      WL_P2P_DISC_ST_SEARCH, P2PAPI_BSSCFG_DEVICE);
- 	kfree(default_chan_list);
- exit:
- 	return err;
diff --git a/package/kernel/mac80211/patches/376-0006-brcmfmac-Cleanup-roaming-configuration.patch b/package/kernel/mac80211/patches/376-0006-brcmfmac-Cleanup-roaming-configuration.patch
deleted file mode 100644
index 41b8770dbd..0000000000
--- a/package/kernel/mac80211/patches/376-0006-brcmfmac-Cleanup-roaming-configuration.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:42 +0100
-Subject: [PATCH] brcmfmac: Cleanup roaming configuration.
-
-Put all roaming configuration related code in one place and
-configure timeout based upon roaming setting.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -4755,7 +4755,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_v
- 	vif->wdev.iftype = type;
- 
- 	vif->pm_block = pm_block;
--	vif->roam_off = -1;
- 
- 	brcmf_init_prof(&vif->profile);
- 
-@@ -5305,35 +5304,33 @@ static void init_vif_event(struct brcmf_
- 	mutex_init(&event->vif_event_lock);
- }
- 
--static s32
--brcmf_dongle_roam(struct brcmf_if *ifp, u32 bcn_timeout)
-+static s32 brcmf_dongle_roam(struct brcmf_if *ifp)
- {
--	s32 err = 0;
-+	s32 err;
-+	u32 bcn_timeout;
- 	__le32 roamtrigger[2];
- 	__le32 roam_delta[2];
- 
--	/*
--	 * Setup timeout if Beacons are lost and roam is
--	 * off to report link down
--	 */
--	if (brcmf_roamoff) {
--		err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
--		if (err) {
--			brcmf_err("bcn_timeout error (%d)\n", err);
--			goto dongle_rom_out;
--		}
-+	/* Configure beacon timeout value based upon roaming setting */
-+	if (brcmf_roamoff)
-+		bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF;
-+	else
-+		bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON;
-+	err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
-+	if (err) {
-+		brcmf_err("bcn_timeout error (%d)\n", err);
-+		goto roam_setup_done;
- 	}
- 
--	/*
--	 * Enable/Disable built-in roaming to allow supplicant
--	 * to take care of roaming
-+	/* Enable/Disable built-in roaming to allow supplicant to take care of
-+	 * roaming.
- 	 */
- 	brcmf_dbg(INFO, "Internal Roaming = %s\n",
- 		  brcmf_roamoff ? "Off" : "On");
- 	err = brcmf_fil_iovar_int_set(ifp, "roam_off", !!(brcmf_roamoff));
- 	if (err) {
- 		brcmf_err("roam_off error (%d)\n", err);
--		goto dongle_rom_out;
-+		goto roam_setup_done;
- 	}
- 
- 	roamtrigger[0] = cpu_to_le32(WL_ROAM_TRIGGER_LEVEL);
-@@ -5342,7 +5339,7 @@ brcmf_dongle_roam(struct brcmf_if *ifp,
- 				     (void *)roamtrigger, sizeof(roamtrigger));
- 	if (err) {
- 		brcmf_err("WLC_SET_ROAM_TRIGGER error (%d)\n", err);
--		goto dongle_rom_out;
-+		goto roam_setup_done;
- 	}
- 
- 	roam_delta[0] = cpu_to_le32(WL_ROAM_DELTA);
-@@ -5351,10 +5348,10 @@ brcmf_dongle_roam(struct brcmf_if *ifp,
- 				     (void *)roam_delta, sizeof(roam_delta));
- 	if (err) {
- 		brcmf_err("WLC_SET_ROAM_DELTA error (%d)\n", err);
--		goto dongle_rom_out;
-+		goto roam_setup_done;
- 	}
- 
--dongle_rom_out:
-+roam_setup_done:
- 	return err;
- }
- 
-@@ -6069,7 +6066,7 @@ static s32 brcmf_config_dongle(struct br
- 	brcmf_dbg(INFO, "power save set to %s\n",
- 		  (power_mode ? "enabled" : "disabled"));
- 
--	err = brcmf_dongle_roam(ifp, WL_BEACON_TIMEOUT);
-+	err = brcmf_dongle_roam(ifp);
- 	if (err)
- 		goto default_conf_out;
- 	err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype,
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h
-@@ -28,7 +28,6 @@
- #define WL_EXTRA_BUF_MAX		2048
- #define WL_ROAM_TRIGGER_LEVEL		-75
- #define WL_ROAM_DELTA			20
--#define WL_BEACON_TIMEOUT		3
- 
- #define WL_SCAN_CHANNEL_TIME		40
- #define WL_SCAN_UNASSOC_TIME		40
-@@ -77,6 +76,9 @@
- 
- #define BRCMF_MAX_DEFAULT_KEYS		4
- 
-+/* beacon loss timeout defaults */
-+#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON	2
-+#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF	4
- 
- /**
-  * enum brcmf_scan_status - scan engine status
-@@ -178,7 +180,6 @@ struct vif_saved_ie {
-  * @ifp: lower layer interface pointer
-  * @wdev: wireless device.
-  * @profile: profile information.
-- * @roam_off: roaming state.
-  * @sme_state: SME state using enum brcmf_vif_status bits.
-  * @pm_block: power-management blocked.
-  * @list: linked list.
-@@ -189,7 +190,6 @@ struct brcmf_cfg80211_vif {
- 	struct brcmf_if *ifp;
- 	struct wireless_dev wdev;
- 	struct brcmf_cfg80211_profile profile;
--	s32 roam_off;
- 	unsigned long sme_state;
- 	bool pm_block;
- 	struct vif_saved_ie saved_ie;
---- a/drivers/net/wireless/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.c
-@@ -29,7 +29,6 @@
- 
- const u8 ALLFFMAC[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
- 
--#define BRCMF_DEFAULT_BCN_TIMEOUT	3
- #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME	40
- #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME	40
- 
-@@ -107,26 +106,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- 		goto done;
- 	}
- 
--	/*
--	 * Setup timeout if Beacons are lost and roam is off to report
--	 * link down
--	 */
--	err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout",
--				      BRCMF_DEFAULT_BCN_TIMEOUT);
--	if (err) {
--		brcmf_err("bcn_timeout error (%d)\n", err);
--		goto done;
--	}
--
--	/* Enable/Disable build-in roaming to allowed ext supplicant to take
--	 * of romaing
--	 */
--	err = brcmf_fil_iovar_int_set(ifp, "roam_off", 1);
--	if (err) {
--		brcmf_err("roam_off error (%d)\n", err);
--		goto done;
--	}
--
- 	/* Setup join_pref to select target by RSSI(with boost on 5GHz) */
- 	join_pref_params[0].type = BRCMF_JOIN_PREF_RSSI_DELTA;
- 	join_pref_params[0].len = 2;
diff --git a/package/kernel/mac80211/patches/376-0007-brcmfmac-Add-beamforming-support.patch b/package/kernel/mac80211/patches/376-0007-brcmfmac-Add-beamforming-support.patch
deleted file mode 100644
index 395166beed..0000000000
--- a/package/kernel/mac80211/patches/376-0007-brcmfmac-Add-beamforming-support.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:43 +0100
-Subject: [PATCH] brcmfmac: Add beamforming support.
-
-Some devices support beamforming. This patch enables tx beamforming
-if supported and reports beamforming capabilities per channel if
-supported.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5671,7 +5671,8 @@ static __le16 brcmf_get_mcs_map(u32 ncha
- }
- 
- static void brcmf_update_vht_cap(struct ieee80211_supported_band *band,
--				 u32 bw_cap[2], u32 nchain)
-+				 u32 bw_cap[2], u32 nchain, u32 txstreams,
-+				 u32 txbf_bfe_cap, u32 txbf_bfr_cap)
- {
- 	__le16 mcs_map;
- 
-@@ -5690,6 +5691,25 @@ static void brcmf_update_vht_cap(struct
- 	mcs_map = brcmf_get_mcs_map(nchain, IEEE80211_VHT_MCS_SUPPORT_0_9);
- 	band->vht_cap.vht_mcs.rx_mcs_map = mcs_map;
- 	band->vht_cap.vht_mcs.tx_mcs_map = mcs_map;
-+
-+	/* Beamforming support information */
-+	if (txbf_bfe_cap & BRCMF_TXBF_SU_BFE_CAP)
-+		band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
-+	if (txbf_bfe_cap & BRCMF_TXBF_MU_BFE_CAP)
-+		band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
-+	if (txbf_bfr_cap & BRCMF_TXBF_SU_BFR_CAP)
-+		band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE;
-+	if (txbf_bfr_cap & BRCMF_TXBF_MU_BFR_CAP)
-+		band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE;
-+
-+	if ((txbf_bfe_cap || txbf_bfr_cap) && (txstreams > 1)) {
-+		band->vht_cap.cap |=
-+			(2 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
-+		band->vht_cap.cap |= ((txstreams - 1) <<
-+				IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT);
-+		band->vht_cap.cap |=
-+			IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB;
-+	}
- }
- 
- static int brcmf_setup_wiphybands(struct wiphy *wiphy)
-@@ -5704,6 +5724,9 @@ static int brcmf_setup_wiphybands(struct
- 	int err;
- 	s32 i;
- 	struct ieee80211_supported_band *band;
-+	u32 txstreams = 0;
-+	u32 txbf_bfe_cap = 0;
-+	u32 txbf_bfr_cap = 0;
- 
- 	(void)brcmf_fil_iovar_int_get(ifp, "vhtmode", &vhtmode);
- 	err = brcmf_fil_iovar_int_get(ifp, "nmode", &nmode);
-@@ -5732,6 +5755,14 @@ static int brcmf_setup_wiphybands(struct
- 		return err;
- 	}
- 
-+	if (vhtmode) {
-+		(void)brcmf_fil_iovar_int_get(ifp, "txstreams", &txstreams);
-+		(void)brcmf_fil_iovar_int_get(ifp, "txbf_bfe_cap",
-+					      &txbf_bfe_cap);
-+		(void)brcmf_fil_iovar_int_get(ifp, "txbf_bfr_cap",
-+					      &txbf_bfr_cap);
-+	}
-+
- 	wiphy = cfg_to_wiphy(cfg);
- 	for (i = 0; i < ARRAY_SIZE(wiphy->bands); i++) {
- 		band = wiphy->bands[i];
-@@ -5741,7 +5772,8 @@ static int brcmf_setup_wiphybands(struct
- 		if (nmode)
- 			brcmf_update_ht_cap(band, bw_cap, nchain);
- 		if (vhtmode)
--			brcmf_update_vht_cap(band, bw_cap, nchain);
-+			brcmf_update_vht_cap(band, bw_cap, nchain, txstreams,
-+					     txbf_bfe_cap, txbf_bfr_cap);
- 	}
- 
- 	return 0;
---- a/drivers/net/wireless/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.c
-@@ -153,6 +153,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- 		goto done;
- 	}
- 
-+	/* Enable tx beamforming, errors can be ignored (not supported) */
-+	(void)brcmf_fil_iovar_int_set(ifp, "txbf", 1);
-+
- 	/* do bus specific preinit here */
- 	err = brcmf_bus_preinit(ifp->drvr->bus_if);
- done:
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -121,6 +121,11 @@
- 
- #define BRCMF_MAX_ASSOCLIST		128
- 
-+#define BRCMF_TXBF_SU_BFE_CAP		BIT(0)
-+#define BRCMF_TXBF_MU_BFE_CAP		BIT(1)
-+#define BRCMF_TXBF_SU_BFR_CAP		BIT(0)
-+#define BRCMF_TXBF_MU_BFR_CAP		BIT(1)
-+
- /* join preference types for join_pref iovar */
- enum brcmf_join_pref_types {
- 	BRCMF_JOIN_PREF_RSSI = 1,
diff --git a/package/kernel/mac80211/patches/376-0008-brcmfmac-assure-net_ratelimit-is-declared-before-use.patch b/package/kernel/mac80211/patches/376-0008-brcmfmac-assure-net_ratelimit-is-declared-before-use.patch
deleted file mode 100644
index d471eb54e0..0000000000
--- a/package/kernel/mac80211/patches/376-0008-brcmfmac-assure-net_ratelimit-is-declared-before-use.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:45 +0100
-Subject: [PATCH] brcmfmac: assure net_ratelimit() is declared before use
-
-Under some kernel configuration we get build issue with implicit
-declaration of net_ratelimit() function. Fix this by explicitly
-including the file providing the prototype.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-@@ -17,6 +17,8 @@
- #ifndef BRCMFMAC_DEBUG_H
- #define BRCMFMAC_DEBUG_H
- 
-+#include <linux/net.h>	/* net_ratelimit() */
-+
- /* message levels */
- #define BRCMF_TRACE_VAL		0x00000002
- #define BRCMF_INFO_VAL		0x00000004
diff --git a/package/kernel/mac80211/patches/376-0009-brcmfmac-Unify-methods-to-define-and-map-firmware-fi.patch b/package/kernel/mac80211/patches/376-0009-brcmfmac-Unify-methods-to-define-and-map-firmware-fi.patch
deleted file mode 100644
index 0ec9d10301..0000000000
--- a/package/kernel/mac80211/patches/376-0009-brcmfmac-Unify-methods-to-define-and-map-firmware-fi.patch
+++ /dev/null
@@ -1,664 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:46 +0100
-Subject: [PATCH] brcmfmac: Unify methods to define and map firmware files.
-
-All bus drivers (sdio, usb and pcie) require firmware files which
-needs to be downloaded to the device, The definitions and mapping
-of device id and revision to firmware and nvram file is done by
-each bus driver. This patch creates common functions and defines
-to simplify and unify the definition of these firmware and nvram
-files and mapping.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -27,9 +27,9 @@
- #define BRCMF_FW_NVRAM_DEVPATH_LEN		19	/* devpath0=pcie/1/4/ */
- #define BRCMF_FW_NVRAM_PCIEDEV_LEN		10	/* pcie/1/4/ + \0 */
- 
--char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
-+static char brcmf_firmware_path[BRCMF_FW_NAME_LEN];
- module_param_string(alternative_fw_path, brcmf_firmware_path,
--		    BRCMF_FW_PATH_LEN, 0440);
-+		    BRCMF_FW_NAME_LEN, 0440);
- 
- enum nvram_parser_state {
- 	IDLE,
-@@ -531,3 +531,43 @@ int brcmf_fw_get_firmwares(struct device
- 					   0);
- }
- 
-+int brcmf_fw_map_chip_to_name(u32 chip, u32 chiprev,
-+			      struct brcmf_firmware_mapping mapping_table[],
-+			      u32 table_size, char fw_name[BRCMF_FW_NAME_LEN],
-+			      char nvram_name[BRCMF_FW_NAME_LEN])
-+{
-+	u32 i;
-+	char end;
-+
-+	for (i = 0; i < table_size; i++) {
-+		if (mapping_table[i].chipid == chip &&
-+		    mapping_table[i].revmask & BIT(chiprev))
-+			break;
-+	}
-+
-+	if (i == table_size) {
-+		brcmf_err("Unknown chipid %d [%d]\n", chip, chiprev);
-+		return -ENODEV;
-+	}
-+
-+	/* check if firmware path is provided by module parameter */
-+	if (brcmf_firmware_path[0] != '\0') {
-+		strlcpy(fw_name, brcmf_firmware_path, BRCMF_FW_NAME_LEN);
-+		if ((nvram_name) && (mapping_table[i].nvram))
-+			strlcpy(nvram_name, brcmf_firmware_path,
-+				BRCMF_FW_NAME_LEN);
-+
-+		end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1];
-+		if (end != '/') {
-+			strlcat(fw_name, "/", BRCMF_FW_NAME_LEN);
-+			if ((nvram_name) && (mapping_table[i].nvram))
-+				strlcat(nvram_name, "/", BRCMF_FW_NAME_LEN);
-+		}
-+	}
-+	strlcat(fw_name, mapping_table[i].fw, BRCMF_FW_NAME_LEN);
-+	if ((nvram_name) && (mapping_table[i].nvram))
-+		strlcat(nvram_name, mapping_table[i].nvram, BRCMF_FW_NAME_LEN);
-+
-+	return 0;
-+}
-+
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-@@ -21,11 +21,51 @@
- #define BRCMF_FW_REQ_FLAGS		0x00F0
- #define  BRCMF_FW_REQ_NV_OPTIONAL	0x0010
- 
--#define	BRCMF_FW_PATH_LEN	256
--#define	BRCMF_FW_NAME_LEN	32
-+#define	BRCMF_FW_NAME_LEN		320
- 
--extern char brcmf_firmware_path[];
-+#define BRCMF_FW_DEFAULT_PATH		"brcm/"
- 
-+/**
-+ * struct brcmf_firmware_mapping - Used to map chipid/revmask to firmware
-+ *	filename and nvram filename. Each bus type implementation should create
-+ *	a table of firmware mappings (using the macros defined below).
-+ *
-+ * @chipid: ID of chip.
-+ * @revmask: bitmask of revisions, e.g. 0x10 means rev 4 only, 0xf means rev 0-3
-+ * @fw: name of the firmware file.
-+ * @nvram: name of nvram file.
-+ */
-+struct brcmf_firmware_mapping {
-+	u32 chipid;
-+	u32 revmask;
-+	const char *fw;
-+	const char *nvram;
-+};
-+
-+#define BRCMF_FW_NVRAM_DEF(fw_nvram_name, fw, nvram) \
-+static const char BRCM_ ## fw_nvram_name ## _FIRMWARE_NAME[] = \
-+	BRCMF_FW_DEFAULT_PATH fw; \
-+static const char BRCM_ ## fw_nvram_name ## _NVRAM_NAME[] = \
-+	BRCMF_FW_DEFAULT_PATH nvram; \
-+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH fw); \
-+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH nvram)
-+
-+#define BRCMF_FW_DEF(fw_name, fw) \
-+static const char BRCM_ ## fw_name ## _FIRMWARE_NAME[] = \
-+	BRCMF_FW_DEFAULT_PATH fw; \
-+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH fw) \
-+
-+#define BRCMF_FW_NVRAM_ENTRY(chipid, mask, name) \
-+	{ chipid, mask, \
-+	  BRCM_ ## name ## _FIRMWARE_NAME, BRCM_ ## name ## _NVRAM_NAME }
-+
-+#define BRCMF_FW_ENTRY(chipid, mask, name) \
-+	{ chipid, mask, BRCM_ ## name ## _FIRMWARE_NAME, NULL }
-+
-+int brcmf_fw_map_chip_to_name(u32 chip, u32 chiprev,
-+			      struct brcmf_firmware_mapping mapping_table[],
-+			      u32 table_size, char fw_name[BRCMF_FW_NAME_LEN],
-+			      char nvram_name[BRCMF_FW_NAME_LEN]);
- void brcmf_fw_nvram_free(void *nvram);
- /*
-  * Request firmware(s) asynchronously. When the asynchronous request
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -44,25 +44,29 @@ enum brcmf_pcie_state {
- 	BRCMFMAC_PCIE_STATE_UP
- };
- 
--
--#define BRCMF_PCIE_43602_FW_NAME		"brcm/brcmfmac43602-pcie.bin"
--#define BRCMF_PCIE_43602_NVRAM_NAME		"brcm/brcmfmac43602-pcie.txt"
--#define BRCMF_PCIE_4350_FW_NAME			"brcm/brcmfmac4350-pcie.bin"
--#define BRCMF_PCIE_4350_NVRAM_NAME		"brcm/brcmfmac4350-pcie.txt"
--#define BRCMF_PCIE_4356_FW_NAME			"brcm/brcmfmac4356-pcie.bin"
--#define BRCMF_PCIE_4356_NVRAM_NAME		"brcm/brcmfmac4356-pcie.txt"
--#define BRCMF_PCIE_43570_FW_NAME		"brcm/brcmfmac43570-pcie.bin"
--#define BRCMF_PCIE_43570_NVRAM_NAME		"brcm/brcmfmac43570-pcie.txt"
--#define BRCMF_PCIE_4358_FW_NAME			"brcm/brcmfmac4358-pcie.bin"
--#define BRCMF_PCIE_4358_NVRAM_NAME		"brcm/brcmfmac4358-pcie.txt"
--#define BRCMF_PCIE_4359_FW_NAME			"brcm/brcmfmac4359-pcie.bin"
--#define BRCMF_PCIE_4359_NVRAM_NAME		"brcm/brcmfmac4359-pcie.txt"
--#define BRCMF_PCIE_4365_FW_NAME			"brcm/brcmfmac4365b-pcie.bin"
--#define BRCMF_PCIE_4365_NVRAM_NAME		"brcm/brcmfmac4365b-pcie.txt"
--#define BRCMF_PCIE_4366_FW_NAME			"brcm/brcmfmac4366b-pcie.bin"
--#define BRCMF_PCIE_4366_NVRAM_NAME		"brcm/brcmfmac4366b-pcie.txt"
--#define BRCMF_PCIE_4371_FW_NAME			"brcm/brcmfmac4371-pcie.bin"
--#define BRCMF_PCIE_4371_NVRAM_NAME		"brcm/brcmfmac4371-pcie.txt"
-+BRCMF_FW_NVRAM_DEF(43602, "brcmfmac43602-pcie.bin", "brcmfmac43602-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(4350, "brcmfmac4350-pcie.bin", "brcmfmac4350-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(4356, "brcmfmac4356-pcie.bin", "brcmfmac4356-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(43570, "brcmfmac43570-pcie.bin", "brcmfmac43570-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(4358, "brcmfmac4358-pcie.bin", "brcmfmac4358-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(4359, "brcmfmac4359-pcie.bin", "brcmfmac4359-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(4365B, "brcmfmac4365b-pcie.bin", "brcmfmac4365b-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(4366B, "brcmfmac4366b-pcie.bin", "brcmfmac4366b-pcie.txt");
-+BRCMF_FW_NVRAM_DEF(4371, "brcmfmac4371-pcie.bin", "brcmfmac4371-pcie.txt");
-+
-+static struct brcmf_firmware_mapping brcmf_pcie_fwnames[] = {
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43602_CHIP_ID, 0xFFFFFFFF, 43602),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4350_CHIP_ID, 0xFFFFFFFF, 4350),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43567_CHIP_ID, 0xFFFFFFFF, 43570),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43569_CHIP_ID, 0xFFFFFFFF, 43570),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43570_CHIP_ID, 0xFFFFFFFF, 43570),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4358_CHIP_ID, 0xFFFFFFFF, 4358),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4359_CHIP_ID, 0xFFFFFFFF, 4359),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4365_CHIP_ID, 0xFFFFFFFF, 4365B),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0xFFFFFFFF, 4366B),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4371_CHIP_ID, 0xFFFFFFFF, 4371),
-+};
- 
- #define BRCMF_PCIE_FW_UP_TIMEOUT		2000 /* msec */
- 
-@@ -202,26 +206,6 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB	3
- 
- 
--MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4350_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4350_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4359_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4359_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4366_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4371_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4371_NVRAM_NAME);
--
--
- struct brcmf_pcie_console {
- 	u32 base_addr;
- 	u32 buf_addr;
-@@ -258,8 +242,8 @@ struct brcmf_pciedev_info {
- 	enum brcmf_pcie_state state;
- 	bool in_irq;
- 	struct pci_dev *pdev;
--	char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
--	char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
-+	char fw_name[BRCMF_FW_NAME_LEN];
-+	char nvram_name[BRCMF_FW_NAME_LEN];
- 	void __iomem *regs;
- 	void __iomem *tcm;
- 	u32 tcm_size;
-@@ -1478,84 +1462,6 @@ brcmf_pcie_init_share_ram_info(struct br
- }
- 
- 
--static int brcmf_pcie_get_fwnames(struct brcmf_pciedev_info *devinfo)
--{
--	char *fw_name;
--	char *nvram_name;
--	uint fw_len, nv_len;
--	char end;
--
--	brcmf_dbg(PCIE, "Enter, chip 0x%04x chiprev %d\n", devinfo->ci->chip,
--		  devinfo->ci->chiprev);
--
--	switch (devinfo->ci->chip) {
--	case BRCM_CC_43602_CHIP_ID:
--		fw_name = BRCMF_PCIE_43602_FW_NAME;
--		nvram_name = BRCMF_PCIE_43602_NVRAM_NAME;
--		break;
--	case BRCM_CC_4350_CHIP_ID:
--		fw_name = BRCMF_PCIE_4350_FW_NAME;
--		nvram_name = BRCMF_PCIE_4350_NVRAM_NAME;
--		break;
--	case BRCM_CC_4356_CHIP_ID:
--		fw_name = BRCMF_PCIE_4356_FW_NAME;
--		nvram_name = BRCMF_PCIE_4356_NVRAM_NAME;
--		break;
--	case BRCM_CC_43567_CHIP_ID:
--	case BRCM_CC_43569_CHIP_ID:
--	case BRCM_CC_43570_CHIP_ID:
--		fw_name = BRCMF_PCIE_43570_FW_NAME;
--		nvram_name = BRCMF_PCIE_43570_NVRAM_NAME;
--		break;
--	case BRCM_CC_4358_CHIP_ID:
--		fw_name = BRCMF_PCIE_4358_FW_NAME;
--		nvram_name = BRCMF_PCIE_4358_NVRAM_NAME;
--		break;
--	case BRCM_CC_4359_CHIP_ID:
--		fw_name = BRCMF_PCIE_4359_FW_NAME;
--		nvram_name = BRCMF_PCIE_4359_NVRAM_NAME;
--		break;
--	case BRCM_CC_4365_CHIP_ID:
--		fw_name = BRCMF_PCIE_4365_FW_NAME;
--		nvram_name = BRCMF_PCIE_4365_NVRAM_NAME;
--		break;
--	case BRCM_CC_4366_CHIP_ID:
--		fw_name = BRCMF_PCIE_4366_FW_NAME;
--		nvram_name = BRCMF_PCIE_4366_NVRAM_NAME;
--		break;
--	case BRCM_CC_4371_CHIP_ID:
--		fw_name = BRCMF_PCIE_4371_FW_NAME;
--		nvram_name = BRCMF_PCIE_4371_NVRAM_NAME;
--		break;
--	default:
--		brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip);
--		return -ENODEV;
--	}
--
--	fw_len = sizeof(devinfo->fw_name) - 1;
--	nv_len = sizeof(devinfo->nvram_name) - 1;
--	/* check if firmware path is provided by module parameter */
--	if (brcmf_firmware_path[0] != '\0') {
--		strncpy(devinfo->fw_name, brcmf_firmware_path, fw_len);
--		strncpy(devinfo->nvram_name, brcmf_firmware_path, nv_len);
--		fw_len -= strlen(devinfo->fw_name);
--		nv_len -= strlen(devinfo->nvram_name);
--
--		end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1];
--		if (end != '/') {
--			strncat(devinfo->fw_name, "/", fw_len);
--			strncat(devinfo->nvram_name, "/", nv_len);
--			fw_len--;
--			nv_len--;
--		}
--	}
--	strncat(devinfo->fw_name, fw_name, fw_len);
--	strncat(devinfo->nvram_name, nvram_name, nv_len);
--
--	return 0;
--}
--
--
- static int brcmf_pcie_download_fw_nvram(struct brcmf_pciedev_info *devinfo,
- 					const struct firmware *fw, void *nvram,
- 					u32 nvram_len)
-@@ -1891,7 +1797,10 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- 	bus->wowl_supported = pci_pme_capable(pdev, PCI_D3hot);
- 	dev_set_drvdata(&pdev->dev, bus);
- 
--	ret = brcmf_pcie_get_fwnames(devinfo);
-+	ret = brcmf_fw_map_chip_to_name(devinfo->ci->chip, devinfo->ci->chiprev,
-+					brcmf_pcie_fwnames,
-+					ARRAY_SIZE(brcmf_pcie_fwnames),
-+					devinfo->fw_name, devinfo->nvram_name);
- 	if (ret)
- 		goto fail_bus;
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -596,136 +596,41 @@ static const struct sdiod_drive_str sdio
- 	{4,  0x1}
- };
- 
--#define BCM43143_FIRMWARE_NAME		"brcm/brcmfmac43143-sdio.bin"
--#define BCM43143_NVRAM_NAME		"brcm/brcmfmac43143-sdio.txt"
--#define BCM43241B0_FIRMWARE_NAME	"brcm/brcmfmac43241b0-sdio.bin"
--#define BCM43241B0_NVRAM_NAME		"brcm/brcmfmac43241b0-sdio.txt"
--#define BCM43241B4_FIRMWARE_NAME	"brcm/brcmfmac43241b4-sdio.bin"
--#define BCM43241B4_NVRAM_NAME		"brcm/brcmfmac43241b4-sdio.txt"
--#define BCM43241B5_FIRMWARE_NAME	"brcm/brcmfmac43241b5-sdio.bin"
--#define BCM43241B5_NVRAM_NAME		"brcm/brcmfmac43241b5-sdio.txt"
--#define BCM4329_FIRMWARE_NAME		"brcm/brcmfmac4329-sdio.bin"
--#define BCM4329_NVRAM_NAME		"brcm/brcmfmac4329-sdio.txt"
--#define BCM4330_FIRMWARE_NAME		"brcm/brcmfmac4330-sdio.bin"
--#define BCM4330_NVRAM_NAME		"brcm/brcmfmac4330-sdio.txt"
--#define BCM4334_FIRMWARE_NAME		"brcm/brcmfmac4334-sdio.bin"
--#define BCM4334_NVRAM_NAME		"brcm/brcmfmac4334-sdio.txt"
--#define BCM43340_FIRMWARE_NAME		"brcm/brcmfmac43340-sdio.bin"
--#define BCM43340_NVRAM_NAME		"brcm/brcmfmac43340-sdio.txt"
--#define BCM4335_FIRMWARE_NAME		"brcm/brcmfmac4335-sdio.bin"
--#define BCM4335_NVRAM_NAME		"brcm/brcmfmac4335-sdio.txt"
--#define BCM43362_FIRMWARE_NAME		"brcm/brcmfmac43362-sdio.bin"
--#define BCM43362_NVRAM_NAME		"brcm/brcmfmac43362-sdio.txt"
--#define BCM4339_FIRMWARE_NAME		"brcm/brcmfmac4339-sdio.bin"
--#define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
--#define BCM43430_FIRMWARE_NAME		"brcm/brcmfmac43430-sdio.bin"
--#define BCM43430_NVRAM_NAME		"brcm/brcmfmac43430-sdio.txt"
--#define BCM43455_FIRMWARE_NAME		"brcm/brcmfmac43455-sdio.bin"
--#define BCM43455_NVRAM_NAME		"brcm/brcmfmac43455-sdio.txt"
--#define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
--#define BCM4354_NVRAM_NAME		"brcm/brcmfmac4354-sdio.txt"
--
--MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43143_NVRAM_NAME);
--MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME);
--MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME);
--MODULE_FIRMWARE(BCM43241B5_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43241B5_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4329_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4330_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4334_NVRAM_NAME);
--MODULE_FIRMWARE(BCM43340_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43340_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4335_NVRAM_NAME);
--MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
--MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43430_NVRAM_NAME);
--MODULE_FIRMWARE(BCM43455_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM43455_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
--
--struct brcmf_firmware_names {
--	u32 chipid;
--	u32 revmsk;
--	const char *bin;
--	const char *nv;
-+BRCMF_FW_NVRAM_DEF(43143, "brcmfmac43143-sdio.bin", "brcmfmac43143-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(43241B0, "brcmfmac43241b0-sdio.bin",
-+		   "brcmfmac43241b0-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(43241B4, "brcmfmac43241b4-sdio.bin",
-+		   "brcmfmac43241b4-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(43241B5, "brcmfmac43241b5-sdio.bin",
-+		   "brcmfmac43241b5-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(4329, "brcmfmac4329-sdio.bin", "brcmfmac4329-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(4330, "brcmfmac4330-sdio.bin", "brcmfmac4330-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(4334, "brcmfmac4334-sdio.bin", "brcmfmac4334-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(43340, "brcmfmac43340-sdio.bin", "brcmfmac43340-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(4335, "brcmfmac4335-sdio.bin", "brcmfmac4335-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(43362, "brcmfmac43362-sdio.bin", "brcmfmac43362-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(4339, "brcmfmac4339-sdio.bin", "brcmfmac4339-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(43430, "brcmfmac43430-sdio.bin", "brcmfmac43430-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(43455, "brcmfmac43455-sdio.bin", "brcmfmac43455-sdio.txt");
-+BRCMF_FW_NVRAM_DEF(4354, "brcmfmac4354-sdio.bin", "brcmfmac4354-sdio.txt");
-+
-+static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0x00000020, 43241B4),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, 43241B5),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, 4329),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, 43430),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455),
-+	BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354)
- };
- 
--enum brcmf_firmware_type {
--	BRCMF_FIRMWARE_BIN,
--	BRCMF_FIRMWARE_NVRAM
--};
--
--#define BRCMF_FIRMWARE_NVRAM(name) \
--	name ## _FIRMWARE_NAME, name ## _NVRAM_NAME
--
--static const struct brcmf_firmware_names brcmf_fwname_data[] = {
--	{ BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) },
--	{ BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) },
--	{ BRCM_CC_43241_CHIP_ID, 0x00000020, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
--	{ BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43241B5) },
--	{ BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
--	{ BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
--	{ BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
--	{ BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43340) },
--	{ BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
--	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
--	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
--	{ BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) },
--	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43455) },
--	{ BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
--};
--
--static int brcmf_sdio_get_fwnames(struct brcmf_chip *ci,
--				  struct brcmf_sdio_dev *sdiodev)
--{
--	int i;
--	char end;
--
--	for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) {
--		if (brcmf_fwname_data[i].chipid == ci->chip &&
--		    brcmf_fwname_data[i].revmsk & BIT(ci->chiprev))
--			break;
--	}
--
--	if (i == ARRAY_SIZE(brcmf_fwname_data)) {
--		brcmf_err("Unknown chipid %d [%d]\n", ci->chip, ci->chiprev);
--		return -ENODEV;
--	}
--
--	/* check if firmware path is provided by module parameter */
--	if (brcmf_firmware_path[0] != '\0') {
--		strlcpy(sdiodev->fw_name, brcmf_firmware_path,
--			sizeof(sdiodev->fw_name));
--		strlcpy(sdiodev->nvram_name, brcmf_firmware_path,
--			sizeof(sdiodev->nvram_name));
--
--		end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1];
--		if (end != '/') {
--			strlcat(sdiodev->fw_name, "/",
--				sizeof(sdiodev->fw_name));
--			strlcat(sdiodev->nvram_name, "/",
--				sizeof(sdiodev->nvram_name));
--		}
--	}
--	strlcat(sdiodev->fw_name, brcmf_fwname_data[i].bin,
--		sizeof(sdiodev->fw_name));
--	strlcat(sdiodev->nvram_name, brcmf_fwname_data[i].nv,
--		sizeof(sdiodev->nvram_name));
--
--	return 0;
--}
--
- static void pkt_align(struct sk_buff *p, int len, int align)
- {
- 	uint datalign;
-@@ -4252,7 +4157,10 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- 	brcmf_sdio_debugfs_create(bus);
- 	brcmf_dbg(INFO, "completed!!\n");
- 
--	ret = brcmf_sdio_get_fwnames(bus->ci, sdiodev);
-+	ret = brcmf_fw_map_chip_to_name(bus->ci->chip, bus->ci->chiprev,
-+					brcmf_sdio_fwnames,
-+					ARRAY_SIZE(brcmf_sdio_fwnames),
-+					sdiodev->fw_name, sdiodev->nvram_name);
- 	if (ret)
- 		goto fail;
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
-@@ -195,8 +195,8 @@ struct brcmf_sdio_dev {
- 	uint max_segment_size;
- 	uint txglomsz;
- 	struct sg_table sgtable;
--	char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
--	char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
-+	char fw_name[BRCMF_FW_NAME_LEN];
-+	char nvram_name[BRCMF_FW_NAME_LEN];
- 	bool wowl_enabled;
- 	enum brcmf_sdiod_state state;
- 	struct brcmf_sdiod_freezer *freezer;
---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-@@ -43,10 +43,20 @@
- #define BRCMF_USB_CBCTL_READ		1
- #define BRCMF_USB_MAX_PKT_SIZE		1600
- 
--#define BRCMF_USB_43143_FW_NAME		"brcm/brcmfmac43143.bin"
--#define BRCMF_USB_43236_FW_NAME		"brcm/brcmfmac43236b.bin"
--#define BRCMF_USB_43242_FW_NAME		"brcm/brcmfmac43242a.bin"
--#define BRCMF_USB_43569_FW_NAME		"brcm/brcmfmac43569.bin"
-+BRCMF_FW_DEF(43143, "brcmfmac43143.bin");
-+BRCMF_FW_DEF(43236B, "brcmfmac43236b.bin");
-+BRCMF_FW_DEF(43242A, "brcmfmac43242a.bin");
-+BRCMF_FW_DEF(43569, "brcmfmac43569.bin");
-+
-+static struct brcmf_firmware_mapping brcmf_usb_fwnames[] = {
-+	BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
-+	BRCMF_FW_ENTRY(BRCM_CC_43235_CHIP_ID, 0x00000008, 43236B),
-+	BRCMF_FW_ENTRY(BRCM_CC_43236_CHIP_ID, 0x00000008, 43236B),
-+	BRCMF_FW_ENTRY(BRCM_CC_43238_CHIP_ID, 0x00000008, 43236B),
-+	BRCMF_FW_ENTRY(BRCM_CC_43242_CHIP_ID, 0xFFFFFFFF, 43242A),
-+	BRCMF_FW_ENTRY(BRCM_CC_43566_CHIP_ID, 0xFFFFFFFF, 43569),
-+	BRCMF_FW_ENTRY(BRCM_CC_43569_CHIP_ID, 0xFFFFFFFF, 43569)
-+};
- 
- #define TRX_MAGIC		0x30524448	/* "HDR0" */
- #define TRX_MAX_OFFSET		3		/* Max number of file offsets */
-@@ -139,6 +149,7 @@ struct brcmf_usbdev_info {
- 	struct brcmf_usbreq *tx_reqs;
- 	struct brcmf_usbreq *rx_reqs;
- 
-+	char fw_name[BRCMF_FW_NAME_LEN];
- 	const u8 *image;	/* buffer for combine fw and nvram */
- 	int image_len;
- 
-@@ -983,45 +994,15 @@ static int brcmf_usb_dlrun(struct brcmf_
- 	return 0;
- }
- 
--static bool brcmf_usb_chip_support(int chipid, int chiprev)
--{
--	switch(chipid) {
--	case BRCM_CC_43143_CHIP_ID:
--		return true;
--	case BRCM_CC_43235_CHIP_ID:
--	case BRCM_CC_43236_CHIP_ID:
--	case BRCM_CC_43238_CHIP_ID:
--		return (chiprev == 3);
--	case BRCM_CC_43242_CHIP_ID:
--		return true;
--	case BRCM_CC_43566_CHIP_ID:
--	case BRCM_CC_43569_CHIP_ID:
--		return true;
--	default:
--		break;
--	}
--	return false;
--}
--
- static int
- brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
- {
--	int devid, chiprev;
- 	int err;
- 
- 	brcmf_dbg(USB, "Enter\n");
- 	if (devinfo == NULL)
- 		return -ENODEV;
- 
--	devid = devinfo->bus_pub.devid;
--	chiprev = devinfo->bus_pub.chiprev;
--
--	if (!brcmf_usb_chip_support(devid, chiprev)) {
--		brcmf_err("unsupported chip %d rev %d\n",
--			  devid, chiprev);
--		return -EINVAL;
--	}
--
- 	if (!devinfo->image) {
- 		brcmf_err("No firmware!\n");
- 		return -ENOENT;
-@@ -1071,25 +1052,6 @@ static int check_file(const u8 *headers)
- 	return -1;
- }
- 
--static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo)
--{
--	switch (devinfo->bus_pub.devid) {
--	case BRCM_CC_43143_CHIP_ID:
--		return BRCMF_USB_43143_FW_NAME;
--	case BRCM_CC_43235_CHIP_ID:
--	case BRCM_CC_43236_CHIP_ID:
--	case BRCM_CC_43238_CHIP_ID:
--		return BRCMF_USB_43236_FW_NAME;
--	case BRCM_CC_43242_CHIP_ID:
--		return BRCMF_USB_43242_FW_NAME;
--	case BRCM_CC_43566_CHIP_ID:
--	case BRCM_CC_43569_CHIP_ID:
--		return BRCMF_USB_43569_FW_NAME;
--	default:
--		return NULL;
--	}
--}
--
- 
- static
- struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
-@@ -1274,9 +1236,16 @@ static int brcmf_usb_probe_cb(struct brc
- 	bus->chip = bus_pub->devid;
- 	bus->chiprev = bus_pub->chiprev;
- 
-+	ret = brcmf_fw_map_chip_to_name(bus_pub->devid, bus_pub->chiprev,
-+					brcmf_usb_fwnames,
-+					ARRAY_SIZE(brcmf_usb_fwnames),
-+					devinfo->fw_name, NULL);
-+	if (ret)
-+		goto fail;
-+
- 	/* request firmware here */
--	ret = brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo),
--				     NULL, brcmf_usb_probe_phase2);
-+	ret = brcmf_fw_get_firmwares(dev, 0, devinfo->fw_name, NULL,
-+				     brcmf_usb_probe_phase2);
- 	if (ret) {
- 		brcmf_err("firmware request failed: %d\n", ret);
- 		goto fail;
-@@ -1472,8 +1441,7 @@ static int brcmf_usb_reset_resume(struct
- 
- 	brcmf_dbg(USB, "Enter\n");
- 
--	return brcmf_fw_get_firmwares(&usb->dev, 0,
--				      brcmf_usb_get_fwname(devinfo), NULL,
-+	return brcmf_fw_get_firmwares(&usb->dev, 0, devinfo->fw_name, NULL,
- 				      brcmf_usb_probe_phase2);
- }
- 
-@@ -1491,10 +1459,6 @@ static struct usb_device_id brcmf_usb_de
- };
- 
- MODULE_DEVICE_TABLE(usb, brcmf_usb_devid_table);
--MODULE_FIRMWARE(BRCMF_USB_43143_FW_NAME);
--MODULE_FIRMWARE(BRCMF_USB_43236_FW_NAME);
--MODULE_FIRMWARE(BRCMF_USB_43242_FW_NAME);
--MODULE_FIRMWARE(BRCMF_USB_43569_FW_NAME);
- 
- static struct usb_driver brcmf_usbdrvr = {
- 	.name = KBUILD_MODNAME,
diff --git a/package/kernel/mac80211/patches/376-0010-brcmfmac-Fix-double-free-on-exception-at-module-load.patch b/package/kernel/mac80211/patches/376-0010-brcmfmac-Fix-double-free-on-exception-at-module-load.patch
deleted file mode 100644
index 2174d099f2..0000000000
--- a/package/kernel/mac80211/patches/376-0010-brcmfmac-Fix-double-free-on-exception-at-module-load.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 25 Nov 2015 11:32:47 +0100
-Subject: [PATCH] brcmfmac: Fix double free on exception at module load.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1083,6 +1083,8 @@ fail:
- 			brcmf_net_detach(ifp->ndev);
- 		if (p2p_ifp)
- 			brcmf_net_detach(p2p_ifp->ndev);
-+		drvr->iflist[0] = NULL;
-+		drvr->iflist[1] = NULL;
- 		return ret;
- 	}
- 	return 0;
diff --git a/package/kernel/mac80211/patches/377-brcmfmac-only-lock-and-unlock-fws-if-fws-is-not-null.patch b/package/kernel/mac80211/patches/377-brcmfmac-only-lock-and-unlock-fws-if-fws-is-not-null.patch
deleted file mode 100644
index 8ec1441f81..0000000000
--- a/package/kernel/mac80211/patches/377-brcmfmac-only-lock-and-unlock-fws-if-fws-is-not-null.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Colin Ian King <colin.king@canonical.com>
-Date: Wed, 2 Dec 2015 11:45:10 +0000
-Subject: [PATCH] brcmfmac: only lock and unlock fws if fws is not null
-
-There is a null ptr check for fws to set bcmc_credit_check, however,
-there a lock and unlock on fws should only performed if fwts is
-also not null to also avoid a potential null pointer deference.
-
-Signed-off-by: Colin Ian King <colin.king@canonical.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1609,10 +1609,11 @@ static int brcmf_fws_notify_bcmc_credit_
- {
- 	struct brcmf_fws_info *fws = ifp->drvr->fws;
- 
--	brcmf_fws_lock(fws);
--	if (fws)
-+	if (fws) {
-+		brcmf_fws_lock(fws);
- 		fws->bcmc_credit_check = true;
--	brcmf_fws_unlock(fws);
-+		brcmf_fws_unlock(fws);
-+	}
- 	return 0;
- }
- 
diff --git a/package/kernel/mac80211/patches/400-ath_move_debug_code.patch b/package/kernel/mac80211/patches/400-ath_move_debug_code.patch
index 298f722843..72e9a41223 100644
--- a/package/kernel/mac80211/patches/400-ath_move_debug_code.patch
+++ b/package/kernel/mac80211/patches/400-ath_move_debug_code.patch
@@ -14,7 +14,7 @@
  ccflags-y += -D__CHECK_ENDIAN__
 --- a/drivers/net/wireless/ath/ath.h
 +++ b/drivers/net/wireless/ath/ath.h
-@@ -316,13 +316,6 @@ void _ath_dbg(struct ath_common *common,
+@@ -318,13 +318,6 @@ void _ath_dbg(struct ath_common *common,
  #endif /* CPTCFG_ATH_DEBUG */
  
  /** Returns string describing opmode, or NULL if unknown mode. */
diff --git a/package/kernel/mac80211/patches/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/402-ath_regd_optional.patch
index 2dac5057c9..7351353076 100644
--- a/package/kernel/mac80211/patches/402-ath_regd_optional.patch
+++ b/package/kernel/mac80211/patches/402-ath_regd_optional.patch
@@ -47,9 +47,9 @@
  
 --- a/drivers/net/wireless/ath/Kconfig
 +++ b/drivers/net/wireless/ath/Kconfig
-@@ -22,6 +22,9 @@ menuconfig ATH_CARDS
+@@ -23,6 +23,9 @@ config WLAN_VENDOR_ATH
  
- if ATH_CARDS
+ if WLAN_VENDOR_ATH
  
 +config ATH_USER_REGD
 +	bool "Do not enforce EEPROM regulatory restrictions"
@@ -59,9 +59,9 @@
  	---help---
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -89,6 +89,7 @@ RTL8187_LEDS=
+@@ -125,6 +125,7 @@ ADM8211=
  ATH_COMMON=
- ATH_CARDS=
+ WLAN_VENDOR_ATH=
  ATH_DEBUG=
 +ATH_USER_REGD=
  ATH_TRACEPOINTS=
diff --git a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
index 1476953c21..1ef55456c5 100644
--- a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
+++ b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
@@ -1,6 +1,6 @@
 --- a/net/wireless/reg.c
 +++ b/net/wireless/reg.c
-@@ -2368,6 +2368,8 @@ void regulatory_hint_country_ie(struct w
+@@ -2411,6 +2411,8 @@ void regulatory_hint_country_ie(struct w
  	enum environment_cap env = ENVIRON_ANY;
  	struct regulatory_request *request = NULL, *lr;
  
@@ -9,11 +9,11 @@
  	/* IE len must be evenly divisible by 2 */
  	if (country_ie_len & 0x01)
  		return;
-@@ -2571,6 +2573,7 @@ static void restore_regulatory_settings(
+@@ -2617,6 +2619,7 @@ static void restore_regulatory_settings(
  
  void regulatory_hint_disconnect(void)
  {
 +	return;
- 	REG_DBG_PRINT("All devices are disconnected, going to restore regulatory settings\n");
+ 	pr_debug("All devices are disconnected, going to restore regulatory settings\n");
  	restore_regulatory_settings(false);
  }
diff --git a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch
index 93760f9f8b..1a62484954 100644
--- a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch
+++ b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -715,6 +715,7 @@ static const struct ieee80211_iface_limi
+@@ -722,6 +722,7 @@ static const struct ieee80211_iface_limi
  				 BIT(NL80211_IFTYPE_AP) },
  	{ .max = 1,	.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
  				 BIT(NL80211_IFTYPE_P2P_GO) },
diff --git a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
index aa521d2abb..924b62e0d4 100644
--- a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
+++ b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
@@ -121,7 +121,7 @@ drivers/net/wireless/ath/ath5k/debug.c |   86 ++++++++++++++++++++++++++++++++
  	debugfs_create_file("antenna", S_IWUSR | S_IRUSR, phydir, ah,
 --- a/drivers/net/wireless/ath/ath5k/ath5k.h
 +++ b/drivers/net/wireless/ath/ath5k/ath5k.h
-@@ -1371,6 +1371,7 @@ struct ath5k_hw {
+@@ -1372,6 +1372,7 @@ struct ath5k_hw {
  	u8			ah_coverage_class;
  	bool			ah_ack_bitrate_high;
  	u8			ah_bwmode;
diff --git a/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch b/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch
index ed2cfee72c..d2a3b96570 100644
--- a/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch
+++ b/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -389,13 +389,8 @@ static void ath9k_hw_init_config(struct
+@@ -390,13 +390,8 @@ static void ath9k_hw_init_config(struct
  
  	ah->config.rx_intr_mitigation = true;
  
@@ -14,5 +14,5 @@
 +	ah->config.rimt_last = 250;
 +	ah->config.rimt_first = 500;
  
- 	/*
- 	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+ 	if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
+ 		ah->config.pll_pwrsave = 7;
diff --git a/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch b/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch
index d4104f0e93..6766111dfd 100644
--- a/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch
+++ b/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/ath9k.h
 +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -87,7 +87,7 @@ int ath_descdma_setup(struct ath_softc *
+@@ -88,7 +88,7 @@ int ath_descdma_setup(struct ath_softc *
  		(_l) &= ((_sz) - 1);		\
  	} while (0)
  
diff --git a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
index 40b5c81b80..c84d1bc829 100644
--- a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
+++ b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -647,6 +647,7 @@ int ath9k_hw_init(struct ath_hw *ah)
+@@ -651,6 +651,7 @@ int ath9k_hw_init(struct ath_hw *ah)
  
  	/* These are all the AR5008/AR9001/AR9002/AR9003 hardware family of chipsets */
  	switch (ah->hw_version.devid) {
diff --git a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
index 0c50a0bbba..e151a12967 100644
--- a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
+++ b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
@@ -1,6 +1,6 @@
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -2320,6 +2320,7 @@ struct cfg80211_qos_map {
+@@ -2363,6 +2363,7 @@ struct cfg80211_qos_map {
   *	(as advertised by the nl80211 feature flag.)
   * @get_tx_power: store the current TX power into the dbm variable;
   *	return 0 if successful
@@ -8,7 +8,7 @@
   *
   * @set_wds_peer: set the WDS peer for a WDS interface
   *
-@@ -2576,6 +2577,7 @@ struct cfg80211_ops {
+@@ -2624,6 +2625,7 @@ struct cfg80211_ops {
  				enum nl80211_tx_power_setting type, int mbm);
  	int	(*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
  				int *dbm);
@@ -18,7 +18,7 @@
  				const u8 *addr);
 --- a/include/net/mac80211.h
 +++ b/include/net/mac80211.h
-@@ -1171,6 +1171,7 @@ enum ieee80211_smps_mode {
+@@ -1286,6 +1286,7 @@ enum ieee80211_smps_mode {
   *
   * @power_level: requested transmit power (in dBm), backward compatibility
   *	value only that is set to the minimum of all interfaces
@@ -26,19 +26,19 @@
   *
   * @chandef: the channel definition to tune to
   * @radar_enabled: whether radar detection is enabled
-@@ -1192,6 +1193,7 @@ struct ieee80211_conf {
+@@ -1306,6 +1307,7 @@ enum ieee80211_smps_mode {
+ struct ieee80211_conf {
  	u32 flags;
  	int power_level, dynamic_ps_timeout;
- 	int max_sleep_period;
 +	int max_antenna_gain;
  
  	u16 listen_interval;
  	u8 ps_dtim_period;
 --- a/include/uapi/linux/nl80211.h
 +++ b/include/uapi/linux/nl80211.h
-@@ -1760,6 +1760,9 @@ enum nl80211_commands {
-  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
-  *      is operating in an indoor environment.
+@@ -1790,6 +1790,9 @@ enum nl80211_commands {
+  *	between scans. The scan plans are executed sequentially.
+  *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
   *
 + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
 + *	transmit power to stay within regulatory limits. u32, dBi.
@@ -46,9 +46,9 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2129,6 +2132,8 @@ enum nl80211_attrs {
- 
- 	NL80211_ATTR_REG_INDOOR,
+@@ -2164,6 +2167,8 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+ 	NL80211_ATTR_SCHED_SCAN_PLANS,
  
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
@@ -57,7 +57,7 @@
  	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2208,6 +2208,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2229,6 +2229,19 @@ static int ieee80211_get_tx_power(struct
  	return 0;
  }
  
@@ -77,7 +77,7 @@
  static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
  				  const u8 *addr)
  {
-@@ -3771,6 +3784,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -3403,6 +3416,7 @@ const struct cfg80211_ops mac80211_confi
  	.set_wiphy_params = ieee80211_set_wiphy_params,
  	.set_tx_power = ieee80211_set_tx_power,
  	.get_tx_power = ieee80211_get_tx_power,
@@ -87,7 +87,7 @@
  	CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1333,6 +1333,7 @@ struct ieee80211_local {
+@@ -1318,6 +1318,7 @@ struct ieee80211_local {
  	int dynamic_ps_forced_timeout;
  
  	int user_power_level; /* in dBm, for all interfaces */
@@ -97,7 +97,7 @@
  
 --- a/net/mac80211/main.c
 +++ b/net/mac80211/main.c
-@@ -98,7 +98,7 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -93,7 +93,7 @@ static u32 ieee80211_hw_conf_chan(struct
  	struct ieee80211_sub_if_data *sdata;
  	struct cfg80211_chan_def chandef = {};
  	u32 changed = 0;
@@ -106,7 +106,7 @@
  	u32 offchannel_flag;
  
  	offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
-@@ -155,6 +155,12 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -150,6 +150,12 @@ static u32 ieee80211_hw_conf_chan(struct
  	}
  	rcu_read_unlock();
  
@@ -119,7 +119,7 @@
  	if (local->hw.conf.power_level != power) {
  		changed |= IEEE80211_CONF_CHANGE_POWER;
  		local->hw.conf.power_level = power;
-@@ -578,6 +584,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
+@@ -586,6 +592,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
  					 IEEE80211_RADIOTAP_MCS_HAVE_BW;
  	local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
  					 IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
@@ -129,7 +129,7 @@
  	local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
-@@ -400,6 +400,7 @@ static const struct nla_policy nl80211_p
+@@ -403,6 +403,7 @@ static const struct nla_policy nl80211_p
  	[NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 },
  	[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
  	[NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
@@ -137,7 +137,7 @@
  };
  
  /* policy for the key attributes */
-@@ -2206,6 +2207,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -2220,6 +2221,20 @@ static int nl80211_set_wiphy(struct sk_b
  		if (result)
  			return result;
  	}
diff --git a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
index 7512811e70..5a5e4643f5 100644
--- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
+++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
@@ -24,7 +24,7 @@
  struct ath_softc {
  	struct ieee80211_hw *hw;
  	struct device *dev;
-@@ -1004,9 +1014,8 @@ struct ath_softc {
+@@ -1005,9 +1015,8 @@ struct ath_softc {
  	spinlock_t chan_lock;
  
  #ifdef CPTCFG_MAC80211_LEDS
@@ -54,7 +54,8 @@
 +			  (brightness != LED_OFF) ^ led->gpio->active_low);
 +	ath9k_ps_restore(sc);
 +}
-+
+ 
+-	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val);
 +static int ath_add_led(struct ath_softc *sc, struct ath_led *led)
 +{
 +	const struct gpio_led *gpio = led->gpio;
@@ -63,8 +64,7 @@
 +	led->cdev.name = gpio->name;
 +	led->cdev.default_trigger = gpio->default_trigger;
 +	led->cdev.brightness_set = ath_led_brightness;
- 
--	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val);
++
 +	ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->cdev);
 +	if (ret < 0)
 +		return ret;
@@ -159,7 +159,7 @@
 +		trigger = ieee80211_get_radio_led_name(sc->hw);
  
 -	sc->led_registered = true;
-+	ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, 1);
++	ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, !sc->sc_ah->config.led_active_high);
  }
  
  void ath_fill_led_pin(struct ath_softc *sc)
diff --git a/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch b/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch
index dc33cd029b..7c10ea6b0d 100644
--- a/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch
+++ b/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch
@@ -59,7 +59,7 @@
 @@ -120,6 +141,12 @@ void ath_init_leds(struct ath_softc *sc)
  		trigger = ieee80211_get_radio_led_name(sc->hw);
  
- 	ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, 1);
+ 	ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, !sc->sc_ah->config.led_active_high);
 +
 +	if (!pdata)
 +		return;
diff --git a/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch
new file mode 100644
index 0000000000..6d62a2b1c2
--- /dev/null
+++ b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch
@@ -0,0 +1,20 @@
+--- a/include/linux/ath9k_platform.h
++++ b/include/linux/ath9k_platform.h
+@@ -36,6 +36,7 @@ struct ath9k_platform_data {
+ 	bool tx_gain_buffalo;
+ 	bool disable_2ghz;
+ 	bool disable_5ghz;
++	bool led_active_high;
+ 
+ 	int (*get_mac_revision)(void);
+ 	int (*external_reset)(void);
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -577,6 +577,7 @@ static int ath9k_init_softc(u16 devid, s
+ 		ah->external_reset = pdata->external_reset;
+ 		ah->disable_2ghz = pdata->disable_2ghz;
+ 		ah->disable_5ghz = pdata->disable_5ghz;
++		ah->config.led_active_high = pdata->led_active_high;
+ 		if (!pdata->endian_check)
+ 			ah->ah_flags |= AH_NO_EEP_SWAP;
+ 	}
diff --git a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
index 08c5a0ffc0..e83c6bfbf9 100644
--- a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
+++ b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
@@ -62,7 +62,7 @@
  	debugfs_create_devm_seqfile(sc->dev, "interrupt", sc->debug.debugfs_phy,
 --- a/drivers/net/wireless/ath/ath9k/hw.h
 +++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -513,6 +513,12 @@ enum {
+@@ -519,6 +519,12 @@ enum {
  	ATH9K_RESET_COLD,
  };
  
@@ -75,7 +75,7 @@
  struct ath9k_hw_version {
  	u32 magic;
  	u16 devid;
-@@ -794,6 +800,8 @@ struct ath_hw {
+@@ -804,6 +810,8 @@ struct ath_hw {
  	u32 rfkill_polarity;
  	u32 ah_flags;
  
@@ -84,7 +84,7 @@
  	bool reset_power_on;
  	bool htc_reset_init;
  
-@@ -1055,6 +1063,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
+@@ -1066,6 +1074,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
  bool ath9k_hw_check_alive(struct ath_hw *ah);
  
  bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
@@ -94,7 +94,7 @@
  struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1804,6 +1804,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
+@@ -1819,6 +1819,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
  }
  EXPORT_SYMBOL(ath9k_hw_get_tsf_offset);
  
@@ -115,7 +115,7 @@
  int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
  		   struct ath9k_hw_cal_data *caldata, bool fastcc)
  {
-@@ -2012,6 +2026,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2027,6 +2041,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ar9003_hw_disable_phy_restart(ah);
  
  	ath9k_hw_apply_gpio_override(ah);
diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
index 8c9b34cb0a..d7bb5a12ce 100644
--- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
+++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.h
 +++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -710,6 +710,7 @@ struct ath_spec_scan {
+@@ -720,6 +720,7 @@ struct ath_spec_scan {
   * @config_pci_powersave:
   * @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC
   *
@@ -8,7 +8,7 @@
   * @spectral_scan_config: set parameters for spectral scan and enable/disable it
   * @spectral_scan_trigger: trigger a spectral scan run
   * @spectral_scan_wait: wait for a spectral scan run to finish
-@@ -732,6 +733,7 @@ struct ath_hw_ops {
+@@ -742,6 +743,7 @@ struct ath_hw_ops {
  			struct ath_hw_antcomb_conf *antconf);
  	void (*antdiv_comb_conf_set)(struct ath_hw *ah,
  			struct ath_hw_antcomb_conf *antconf);
@@ -18,7 +18,7 @@
  	void (*spectral_scan_trigger)(struct ath_hw *ah);
 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
 +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
-@@ -1999,6 +1999,26 @@ void ar9003_hw_init_rate_txpower(struct
+@@ -1998,6 +1998,26 @@ void ar9003_hw_init_rate_txpower(struct
  	}
  }
  
@@ -45,7 +45,7 @@
  void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
  {
  	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-@@ -2035,6 +2055,7 @@ void ar9003_hw_attach_phy_ops(struct ath
+@@ -2034,6 +2054,7 @@ void ar9003_hw_attach_phy_ops(struct ath
  	priv_ops->set_radar_params = ar9003_hw_set_radar_params;
  	priv_ops->fast_chan_change = ar9003_hw_fast_chan_change;
  
@@ -55,7 +55,7 @@
  	ops->spectral_scan_config = ar9003_hw_spectral_scan_config;
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -703,7 +703,8 @@ static void ath9k_init_txpower_limits(st
+@@ -711,7 +711,8 @@ static void ath9k_init_txpower_limits(st
  	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
  		ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ);
  
@@ -65,7 +65,7 @@
  }
  
  static const struct ieee80211_iface_limit if_limits[] = {
-@@ -896,6 +897,18 @@ static void ath9k_set_hw_capab(struct at
+@@ -897,6 +898,18 @@ static void ath9k_set_hw_capab(struct at
  	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
  }
  
@@ -84,7 +84,7 @@
  int ath9k_init_device(u16 devid, struct ath_softc *sc,
  		    const struct ath_bus_ops *bus_ops)
  {
-@@ -941,6 +954,8 @@ int ath9k_init_device(u16 devid, struct
+@@ -942,6 +955,8 @@ int ath9k_init_device(u16 devid, struct
  		ARRAY_SIZE(ath9k_tpt_blink));
  #endif
  
@@ -110,7 +110,7 @@
  static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable)
 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
 +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -1316,9 +1316,30 @@ void ar5008_hw_init_rate_txpower(struct
+@@ -1327,9 +1327,30 @@ void ar5008_hw_init_rate_txpower(struct
  	}
  }
  
@@ -141,7 +141,7 @@
  	static const u32 ar5416_cca_regs[6] = {
  		AR_PHY_CCA,
  		AR_PHY_CH1_CCA,
-@@ -1333,6 +1354,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
+@@ -1344,6 +1365,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
  	if (ret)
  	    return ret;
  
diff --git a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch
index 240b898c0d..8768c5d89a 100644
--- a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch
+++ b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -245,6 +245,19 @@ void ath9k_hw_get_channel_centers(struct
+@@ -246,6 +246,19 @@ void ath9k_hw_get_channel_centers(struct
  		centers->synth_center + (extoff * HT40_CHANNEL_CENTER_SHIFT);
  }
  
@@ -20,7 +20,7 @@
  /******************/
  /* Chip Revisions */
  /******************/
-@@ -1382,6 +1395,9 @@ static bool ath9k_hw_set_reset(struct at
+@@ -1397,6 +1410,9 @@ static bool ath9k_hw_set_reset(struct at
  	if (AR_SREV_9100(ah))
  		udelay(50);
  
@@ -30,7 +30,7 @@
  	return true;
  }
  
-@@ -1481,6 +1497,9 @@ static bool ath9k_hw_chip_reset(struct a
+@@ -1496,6 +1512,9 @@ static bool ath9k_hw_chip_reset(struct a
  		ar9003_hw_internal_regulator_apply(ah);
  	ath9k_hw_init_pll(ah, chan);
  
@@ -40,7 +40,7 @@
  	return true;
  }
  
-@@ -1782,8 +1801,14 @@ static int ath9k_hw_do_fastcc(struct ath
+@@ -1797,8 +1816,14 @@ static int ath9k_hw_do_fastcc(struct ath
  	if (AR_SREV_9271(ah))
  		ar9002_hw_load_ani_reg(ah, chan);
  
@@ -55,7 +55,7 @@
  	return -EINVAL;
  }
  
-@@ -2037,6 +2062,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2052,6 +2077,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ath9k_hw_set_radar_params(ah);
  	}
  
diff --git a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch
index 9610372b08..3d24ccda1f 100644
--- a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch
+++ b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
 +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -945,55 +945,6 @@ static bool ar5008_hw_ani_control_new(st
+@@ -956,55 +956,6 @@ static bool ar5008_hw_ani_control_new(st
  		 * on == 0 means more noise imm
  		 */
  		u32 on = param ? 1 : 0;
@@ -79,7 +79,7 @@
  static const u8 ofdm2pwr[] = {
  	ALL_TARGET_LEGACY_6_24,
  	ALL_TARGET_LEGACY_6_24,
-@@ -1090,11 +1076,6 @@ static bool ar9003_hw_ani_control(struct
+@@ -1089,11 +1075,6 @@ static bool ar9003_hw_ani_control(struct
  	struct ath_common *common = ath9k_hw_common(ah);
  	struct ath9k_channel *chan = ah->curchan;
  	struct ar5416AniState *aniState = &ah->ani;
@@ -91,7 +91,7 @@
  	s32 value, value2;
  
  	switch (cmd & ah->ani_function) {
-@@ -1108,61 +1089,6 @@ static bool ar9003_hw_ani_control(struct
+@@ -1107,61 +1088,6 @@ static bool ar9003_hw_ani_control(struct
  		 */
  		u32 on = param ? 1 : 0;
  
diff --git a/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch b/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
index c0dc4fe7a0..bd81555ac1 100644
--- a/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
+++ b/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
@@ -16,36 +16,18 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
 Changes since v1: ---
 ---
- drivers/net/wireless/rt2x00/rt2800.h    |   13 -------------
- drivers/net/wireless/rt2x00/rt2800lib.h |   11 +++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    |   13 -------------
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h |   11 +++++++++++
  2 files changed, 11 insertions(+), 13 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
-@@ -2960,17 +2960,4 @@ enum rt2800_eeprom_word {
-  */
- #define BCN_TBTT_OFFSET 64
- 
--/*
-- * RT2800 driver data structure
-- */
--struct rt2800_drv_data {
--	u8 calibration_bw20;
--	u8 calibration_bw40;
--	u8 bbp25;
--	u8 bbp26;
--	u8 txmixer_gain_24g;
--	u8 txmixer_gain_5g;
--	unsigned int tbtt_tick;
--};
--
- #endif /* RT2800_H */
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -20,6 +20,17 @@
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -20,6 +20,20 @@
  #ifndef RT2800LIB_H
  #define RT2800LIB_H
  
++#include "rt2800.h"
++
 +/* RT2800 driver data structure */
 +struct rt2800_drv_data {
 +	u8 calibration_bw20;
@@ -55,8 +37,30 @@ Changes since v1: ---
 +	u8 txmixer_gain_24g;
 +	u8 txmixer_gain_5g;
 +	unsigned int tbtt_tick;
++	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
 +};
 +
  struct rt2800_ops {
  	void (*register_read)(struct rt2x00_dev *rt2x00dev,
  			      const unsigned int offset, u32 *value);
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+@@ -2969,18 +2969,4 @@ enum rt2800_eeprom_word {
+ #define WCID_END	222
+ #define STA_IDS_SIZE	(WCID_END - WCID_START + 2)
+ 
+-/*
+- * RT2800 driver data structure
+- */
+-struct rt2800_drv_data {
+-	u8 calibration_bw20;
+-	u8 calibration_bw40;
+-	u8 bbp25;
+-	u8 bbp26;
+-	u8 txmixer_gain_24g;
+-	u8 txmixer_gain_5g;
+-	unsigned int tbtt_tick;
+-	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
+-};
+-
+ #endif /* RT2800_H */
diff --git a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch
index 6bad6ac509..82459091fe 100644
--- a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch
+++ b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch
@@ -18,13 +18,13 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 Changes since v1:
   - don't enable the new flag for RT3071 and RT5592
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    4 ++++
- drivers/net/wireless/rt2x00/rt2800lib.h |   13 +++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    4 ++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h |   13 +++++++++++++
  2 files changed, 17 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7747,6 +7747,7 @@ static int rt2800_probe_rt(struct rt2x00
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7722,6 +7722,7 @@ static int rt2800_probe_rt(struct rt2x00
  
  int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
  {
@@ -32,7 +32,7 @@ Changes since v1:
  	int retval;
  	u32 reg;
  
-@@ -7754,6 +7755,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7729,6 +7730,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (retval)
  		return retval;
  
@@ -42,11 +42,11 @@ Changes since v1:
  	/*
  	 * Allocate eeprom data.
  	 */
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -20,6 +20,10 @@
- #ifndef RT2800LIB_H
- #define RT2800LIB_H
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -22,6 +22,10 @@
+ 
+ #include "rt2800.h"
  
 +enum rt2800_flag {
 +	RT2800_HAS_HIGH_SHARED_MEM,
@@ -55,16 +55,16 @@ Changes since v1:
  /* RT2800 driver data structure */
  struct rt2800_drv_data {
  	u8 calibration_bw20;
-@@ -29,6 +33,8 @@ struct rt2800_drv_data {
- 	u8 txmixer_gain_24g;
+@@ -32,6 +36,8 @@ struct rt2800_drv_data {
  	u8 txmixer_gain_5g;
  	unsigned int tbtt_tick;
+ 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
 +
 +	unsigned long rt2800_flags;
  };
  
  struct rt2800_ops {
-@@ -61,6 +67,13 @@ struct rt2800_ops {
+@@ -64,6 +70,13 @@ struct rt2800_ops {
  	__le32 *(*drv_get_txwi)(struct queue_entry *entry);
  };
  
diff --git a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch
index 9f8dfcc467..7abfcd16f2 100644
--- a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch
+++ b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch
@@ -17,17 +17,17 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
 Changes since v1: ---
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c  |   55 +++++++++++++++++++++++++++++-
- drivers/net/wireless/rt2x00/rt2800lib.h  |   32 +++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800mmio.c |   26 ++++++++++++++
- drivers/net/wireless/rt2x00/rt2800mmio.h |    4 +++
- drivers/net/wireless/rt2x00/rt2800pci.c  |   14 ++++++++
- drivers/net/wireless/rt2x00/rt2800soc.c  |    3 ++
- drivers/net/wireless/rt2x00/rt2800usb.c  |   31 +++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c  |   55 +++++++++++++++++++++++++++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h  |   32 +++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800mmio.c |   26 ++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800mmio.h |    4 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800pci.c  |   14 ++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800soc.c  |    3 ++
+ drivers/net/wireless/ralink/rt2x00/rt2800usb.c  |   31 +++++++++++++++++
  7 files changed, 164 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -451,11 +451,13 @@ void rt2800_mcu_request(struct rt2x00_de
  		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
  		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
@@ -175,7 +175,7 @@ Changes since v1: ---
  
  	/*
  	 * Update WCID information
-@@ -1437,8 +1467,11 @@ int rt2800_config_pairwise_key(struct rt
+@@ -1405,8 +1435,11 @@ int rt2800_config_pairwise_key(struct rt
  		       sizeof(key_entry.rx_mic));
  
  		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
@@ -187,7 +187,7 @@ Changes since v1: ---
  	}
  
  	/*
-@@ -4908,14 +4941,19 @@ static int rt2800_init_registers(struct
+@@ -4885,14 +4918,19 @@ static int rt2800_init_registers(struct
  	/*
  	 * ASIC will keep garbage value after boot, clear encryption keys.
  	 */
@@ -207,7 +207,7 @@ Changes since v1: ---
  	}
  
  	/*
-@@ -5041,8 +5079,10 @@ static int rt2800_wait_bbp_ready(struct
+@@ -5018,8 +5056,10 @@ static int rt2800_wait_bbp_ready(struct
  	 * BBP was enabled after firmware was loaded,
  	 * but we need to reactivate it now.
  	 */
@@ -218,7 +218,7 @@ Changes since v1: ---
  	msleep(1);
  
  	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-@@ -6738,11 +6778,19 @@ int rt2800_enable_radio(struct rt2x00_de
+@@ -6715,11 +6755,19 @@ int rt2800_enable_radio(struct rt2x00_de
  	/*
  	 * Send signal during boot time to initialize firmware.
  	 */
@@ -239,7 +239,7 @@ Changes since v1: ---
  	msleep(1);
  
  	/*
-@@ -7751,6 +7799,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7726,6 +7774,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	int retval;
  	u32 reg;
  
@@ -248,22 +248,22 @@ Changes since v1: ---
  	retval = rt2800_probe_rt(rt2x00dev);
  	if (retval)
  		return retval;
-@@ -7830,8 +7880,11 @@ void rt2800_get_tkip_seq(struct ieee8021
- 	u32 offset;
+@@ -7809,8 +7859,11 @@ void rt2800_get_key_seq(struct ieee80211
+ 		return;
  
- 	offset = MAC_IVEIV_ENTRY(hw_key_idx);
+ 	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
 +
 +	rt2800_shared_mem_lock(rt2x00dev);
  	rt2800_register_multiread(rt2x00dev, offset,
  				      &iveiv_entry, sizeof(iveiv_entry));
 +	rt2800_shared_mem_unlock(rt2x00dev);
  
- 	memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
- 	memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -35,6 +35,11 @@ struct rt2800_drv_data {
- 	unsigned int tbtt_tick;
+ 	memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2);
+ 	memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4);
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -38,6 +38,11 @@ struct rt2800_drv_data {
+ 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
  
  	unsigned long rt2800_flags;
 +
@@ -274,7 +274,7 @@ Changes since v1: ---
  };
  
  struct rt2800_ops {
-@@ -65,6 +70,10 @@ struct rt2800_ops {
+@@ -68,6 +73,10 @@ struct rt2800_ops {
  				  const u8 *data, const size_t len);
  	int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
  	__le32 *(*drv_get_txwi)(struct queue_entry *entry);
@@ -285,7 +285,7 @@ Changes since v1: ---
  };
  
  static inline bool rt2800_has_high_shared_mem(struct rt2x00_dev *rt2x00dev)
-@@ -74,6 +83,29 @@ static inline bool rt2800_has_high_share
+@@ -77,6 +86,29 @@ static inline bool rt2800_has_high_share
  	return test_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  }
  
@@ -315,8 +315,8 @@ Changes since v1: ---
  static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
  					const unsigned int offset,
  					u32 *value)
---- a/drivers/net/wireless/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/rt2x00/rt2800mmio.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
 @@ -820,8 +820,10 @@ int rt2800mmio_init_registers(struct rt2
  	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
  	rt2x00mmio_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
@@ -359,8 +359,8 @@ Changes since v1: ---
  MODULE_AUTHOR(DRV_PROJECT);
  MODULE_VERSION(DRV_VERSION);
  MODULE_DESCRIPTION("rt2800 MMIO library");
---- a/drivers/net/wireless/rt2x00/rt2800mmio.h
-+++ b/drivers/net/wireless/rt2x00/rt2800mmio.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
 @@ -160,4 +160,8 @@ int rt2800mmio_init_registers(struct rt2
  /* Device state switch handlers. */
  int rt2800mmio_enable_radio(struct rt2x00_dev *rt2x00dev);
@@ -370,8 +370,8 @@ Changes since v1: ---
 +void rt2800mmio_shmem_unlock(struct rt2x00_dev *rt2x00dev);
 +
  #endif /* RT2800MMIO_H */
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
 @@ -69,7 +69,9 @@ static void rt2800pci_mcu_status(struct
  		return;
  
@@ -444,8 +444,8 @@ Changes since v1: ---
  };
  
  static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
 @@ -176,6 +176,9 @@ static const struct rt2800_ops rt2800soc
  	.drv_write_firmware	= rt2800soc_write_firmware,
  	.drv_init_registers	= rt2800mmio_init_registers,
@@ -456,8 +456,8 @@ Changes since v1: ---
  };
  
  static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
---- a/drivers/net/wireless/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
 @@ -51,6 +51,27 @@ static bool rt2800usb_hwcrypt_disabled(s
  	return modparam_nohwcrypt;
  }
@@ -486,7 +486,7 @@ Changes since v1: ---
  /*
   * Queue handlers.
   */
-@@ -294,8 +315,10 @@ static int rt2800usb_write_firmware(stru
+@@ -299,8 +320,10 @@ static int rt2800usb_write_firmware(stru
  					      data + offset, length);
  	}
  
@@ -497,7 +497,7 @@ Changes since v1: ---
  
  	/*
  	 * Send firmware request to device to load firmware,
-@@ -310,7 +333,10 @@ static int rt2800usb_write_firmware(stru
+@@ -315,7 +338,10 @@ static int rt2800usb_write_firmware(stru
  	}
  
  	msleep(10);
@@ -508,7 +508,7 @@ Changes since v1: ---
  
  	return 0;
  }
-@@ -328,8 +354,10 @@ static int rt2800usb_init_registers(stru
+@@ -333,8 +359,10 @@ static int rt2800usb_init_registers(stru
  	if (rt2800_wait_csr_ready(rt2x00dev))
  		return -EBUSY;
  
@@ -519,7 +519,7 @@ Changes since v1: ---
  
  	reg = 0;
  	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
-@@ -859,6 +887,9 @@ static const struct rt2800_ops rt2800usb
+@@ -863,6 +891,9 @@ static const struct rt2800_ops rt2800usb
  	.drv_write_firmware	= rt2800usb_write_firmware,
  	.drv_init_registers	= rt2800usb_init_registers,
  	.drv_get_txwi		= rt2800usb_get_txwi,
diff --git a/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch b/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch
index b8c1914645..985a3b91f1 100644
--- a/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch
+++ b/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch
@@ -23,12 +23,12 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
 Changes since v1: ---
 ---
- drivers/net/wireless/rt2x00/rt2800.h    |    3 +++
- drivers/net/wireless/rt2x00/rt2800lib.c |   44 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    |    3 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   44 +++++++++++++++++++++++++++++++
  2 files changed, 47 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -574,6 +574,7 @@
  #define PBF_SYS_CTRL			0x0400
  #define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
@@ -46,8 +46,8 @@ Changes since v1: ---
  #define BEACON_BASE_TO_OFFSET(_base)	(((_base) - 0x4000) / 64)
  
  /*
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -82,6 +82,39 @@ static inline bool rt2800_is_305x_soc(st
  	return false;
  }
diff --git a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch
index e7eb630d48..02b2acfeee 100644
--- a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch
+++ b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch
@@ -18,13 +18,13 @@ new field with the actually used value.
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    5 ++++-
- drivers/net/wireless/rt2x00/rt2800lib.h |    1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    5 ++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h |    1 +
  2 files changed, 5 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4638,6 +4638,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4615,6 +4615,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
   */
  static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
  {
@@ -32,7 +32,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	u32 reg;
  	u16 eeprom;
  	unsigned int i;
-@@ -5003,7 +5004,7 @@ static int rt2800_init_registers(struct
+@@ -4980,7 +4981,7 @@ static int rt2800_init_registers(struct
  	/*
  	 * Clear all beacons
  	 */
@@ -41,7 +41,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		rt2800_clear_beacon_register(rt2x00dev, i);
  
  	if (rt2x00_is_usb(rt2x00dev)) {
-@@ -7852,6 +7853,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7827,6 +7828,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  
@@ -50,13 +50,13 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	/*
  	 * Allocate eeprom data.
  	 */
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -33,6 +33,7 @@ struct rt2800_drv_data {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -35,6 +35,7 @@ struct rt2800_drv_data {
  	u8 txmixer_gain_24g;
  	u8 txmixer_gain_5g;
  	unsigned int tbtt_tick;
 +	unsigned int hw_beacon_count;
+ 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
  
  	unsigned long rt2800_flags;
- 
diff --git a/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch b/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch
index b79b4bea1a..4e735d348a 100644
--- a/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch
+++ b/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: init additional beacon offset registers
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800.h    |   14 ++++++++++++++
- drivers/net/wireless/rt2x00/rt2800lib.c |   24 ++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    |   14 ++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   24 ++++++++++++++++++++++++
  2 files changed, 38 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -629,6 +629,20 @@
   */
  #define PBF_DBG				0x043c
@@ -32,9 +32,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
   * RF registers
   */
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4650,6 +4650,30 @@ static int rt2800_init_registers(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4627,6 +4627,30 @@ static int rt2800_init_registers(struct
  	if (ret)
  		return ret;
  
diff --git a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch
index 180c5e3061..e909272710 100644
--- a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch
+++ b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix max supported beacon count for RT3593
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    5 ++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7877,7 +7877,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7852,7 +7852,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  
diff --git a/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch b/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch
index 8a10c6e02f..565e39de5f 100644
--- a/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch
@@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: allow to build rt2800soc module for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/Kconfig |    2 +-
+ drivers/net/wireless/ralink/rt2x00/Kconfig |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
 @@ -210,7 +210,7 @@ endif
  config RT2800SOC
  	tristate "Ralink WiSoC support"
diff --git a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch
index 31aa34a8e7..7fe38e0958 100644
--- a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable support for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    1 +
  1 file changed, 1 insertion(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7847,6 +7847,7 @@ static int rt2800_probe_rt(struct rt2x00
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7822,6 +7822,7 @@ static int rt2800_probe_rt(struct rt2x00
  	case RT3390:
  	case RT3572:
  	case RT3593:
diff --git a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
index a90c5909ba..253a0c0c1e 100644
--- a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
+++ b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add rf_vals for RF3853
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800.h    |    4 +-
- drivers/net/wireless/rt2x00/rt2800lib.c |   65 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    |    4 +-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   65 +++++++++++++++++++++++++++++++
  2 files changed, 68 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -48,7 +48,8 @@
   * RF2853 2.4G/5G 3T3R
   * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
@@ -29,9 +29,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  #define RF5360				0x5360
  #define RF5362				0x5362
  #define RF5370				0x5370
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7465,6 +7465,66 @@ static const struct rf_channel rf_vals_3
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7442,6 +7442,66 @@ static const struct rf_channel rf_vals_3
  	{173, 0x61, 0, 9},
  };
  
@@ -98,7 +98,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static const struct rf_channel rf_vals_5592_xtal20[] = {
  	/* Channel, N, K, mod, R */
  	{1, 482, 4, 10, 3},
-@@ -7694,6 +7754,11 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7669,6 +7729,11 @@ static int rt2800_probe_hw_mode(struct r
  		spec->channels = rf_vals_3x;
  		break;
  
diff --git a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
index ab2673b55b..f15c22b30f 100644
--- a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
+++ b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable VCO calibration for RF3853
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    2 ++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    2 ++
  1 file changed, 2 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4402,6 +4402,7 @@ void rt2800_vco_calibration(struct rt2x0
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4379,6 +4379,7 @@ void rt2800_vco_calibration(struct rt2x0
  	case RF3053:
  	case RF3070:
  	case RF3290:
@@ -18,7 +18,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -7873,6 +7874,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7848,6 +7849,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF3053:
  	case RF3070:
  	case RF3290:
diff --git a/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch b/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch
index 05ed444435..c120f2c1d1 100644
--- a/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch
+++ b/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add channel configuration function for
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |  208 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |  208 +++++++++++++++++++++++++++++++
  1 file changed, 208 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -2649,6 +2649,211 @@ static void rt2800_config_channel_rf3053
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -2626,6 +2626,211 @@ static void rt2800_config_channel_rf3053
  	}
  }
  
@@ -223,7 +223,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  #define POWER_BOUND		0x27
  #define POWER_BOUND_5G		0x2b
  
-@@ -3261,6 +3466,9 @@ static void rt2800_config_channel(struct
+@@ -3238,6 +3443,9 @@ static void rt2800_config_channel(struct
  	case RF3322:
  		rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
  		break;
diff --git a/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch b/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch
index 3b50775499..f006304e7f 100644
--- a/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch
+++ b/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable RF3853 support
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    1 +
  1 file changed, 1 insertion(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7430,6 +7430,7 @@ static int rt2800_init_eeprom(struct rt2
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7407,6 +7407,7 @@ static int rt2800_init_eeprom(struct rt2
  	case RF3290:
  	case RF3320:
  	case RF3322:
diff --git a/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch b/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
index 4dfb068e2f..a56bfa865e 100644
--- a/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
+++ b/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add MAC register initialization for
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800.h    |   14 ++++++++++++++
- drivers/net/wireless/rt2x00/rt2800lib.c |   19 ++++++++++++++++---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    |   14 ++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   19 ++++++++++++++++---
  2 files changed, 30 insertions(+), 3 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -1588,6 +1588,20 @@
  #define TX_PWR_CFG_9_STBC7_CH2		FIELD32(0x00000f00)
  
@@ -33,9 +33,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
   * RX_FILTER_CFG: RX configuration register.
   */
  #define RX_FILTER_CFG			0x1400
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -5005,6 +5005,12 @@ static int rt2800_init_registers(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4982,6 +4982,12 @@ static int rt2800_init_registers(struct
  			rt2800_register_write(rt2x00dev, TX_SW_CFG2,
  					      0x00000000);
  		}
@@ -48,7 +48,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
  		   rt2x00_rt(rt2x00dev, RT5392) ||
  		   rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -5035,9 +5041,11 @@ static int rt2800_init_registers(struct
+@@ -5012,9 +5018,11 @@ static int rt2800_init_registers(struct
  
  	rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
  	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
@@ -63,7 +63,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
  	else
  		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
-@@ -5190,6 +5198,11 @@ static int rt2800_init_registers(struct
+@@ -5167,6 +5175,11 @@ static int rt2800_init_registers(struct
  	reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
  	rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
  
diff --git a/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch b/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch
index 837c025b84..d68ad50447 100644
--- a/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch
+++ b/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch
@@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800soc: fix rt2800soc_disable_radio for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800soc.c |    9 ++++++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800soc.c |    9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
 @@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s
  
  static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
diff --git a/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch b/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
index 6663b785d8..953263226c 100644
--- a/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
+++ b/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add BBP register initialization for
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |   44 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   44 +++++++++++++++++++++++++++++++
  1 file changed, 44 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -5808,6 +5808,47 @@ static void rt2800_init_bbp_3593(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -5785,6 +5785,47 @@ static void rt2800_init_bbp_3593(struct
  		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
  }
  
@@ -59,7 +59,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
  {
  	int ant, div_mode;
-@@ -6026,6 +6067,9 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6003,6 +6044,9 @@ static void rt2800_init_bbp(struct rt2x0
  	case RT3593:
  		rt2800_init_bbp_3593(rt2x00dev);
  		return;
diff --git a/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch b/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
index 6e66f1430a..936fa35a00 100644
--- a/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add RFCSR initialization for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800.h    |    1 +
- drivers/net/wireless/rt2x00/rt2800lib.c |  141 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    |    1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |  141 +++++++++++++++++++++++++++++++
  2 files changed, 142 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -2171,6 +2171,7 @@ struct mac_iveiv_entry {
  /*
   * RFCSR 2:
@@ -19,9 +19,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  #define RFCSR2_RESCAL_EN		FIELD8(0x80)
  
  /*
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -6843,6 +6843,144 @@ static void rt2800_init_rfcsr_3593(struc
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -6820,6 +6820,144 @@ static void rt2800_init_rfcsr_3593(struc
  	/* TODO: enable stream mode support */
  }
  
@@ -166,7 +166,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
  {
  	rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -7074,6 +7212,9 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7051,6 +7189,9 @@ static void rt2800_init_rfcsr(struct rt2
  	case RT3390:
  		rt2800_init_rfcsr_3390(rt2x00dev);
  		break;
diff --git a/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch b/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
index 57af96106f..ae899f73be 100644
--- a/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
+++ b/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
@@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use the extended EEPROM map for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -342,7 +342,8 @@ static unsigned int rt2800_eeprom_word_i
  		      wiphy_name(rt2x00dev->hw->wiphy), word))
  		return 0;
diff --git a/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch b/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
index 9390f7ecfb..bcaf67677d 100644
--- a/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: force rf type to RF3853 on RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    2 ++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    2 ++
  1 file changed, 2 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7611,6 +7611,8 @@ static int rt2800_init_eeprom(struct rt2
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7588,6 +7588,8 @@ static int rt2800_init_eeprom(struct rt2
  	    rt2x00_rt(rt2x00dev, RT5390) ||
  	    rt2x00_rt(rt2x00dev, RT5392))
  		rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
diff --git a/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch b/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
index 1cba4f68c1..3169c1048d 100644
--- a/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
+++ b/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add channel configuration code for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |   72 +++++++++++++++++++++++++++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   72 +++++++++++++++++++++++++++++--
  1 file changed, 69 insertions(+), 3 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3429,6 +3429,36 @@ static char rt2800_txpower_to_dev(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3406,6 +3406,36 @@ static char rt2800_txpower_to_dev(struct
  		return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
  }
  
@@ -47,7 +47,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
  				  struct ieee80211_conf *conf,
  				  struct rf_channel *rf,
-@@ -3447,6 +3477,12 @@ static void rt2800_config_channel(struct
+@@ -3424,6 +3454,12 @@ static void rt2800_config_channel(struct
  			rt2800_txpower_to_dev(rt2x00dev, rf->channel,
  					      info->default_power3);
  
@@ -60,7 +60,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	switch (rt2x00dev->chip.rf) {
  	case RF2020:
  	case RF3020:
-@@ -3530,6 +3566,15 @@ static void rt2800_config_channel(struct
+@@ -3507,6 +3543,15 @@ static void rt2800_config_channel(struct
  		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
  		rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
  		rt2800_bbp_write(rt2x00dev, 77, 0x98);
@@ -76,7 +76,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	} else {
  		rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
  		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-@@ -3542,6 +3587,7 @@ static void rt2800_config_channel(struct
+@@ -3519,6 +3564,7 @@ static void rt2800_config_channel(struct
  		    !rt2x00_rt(rt2x00dev, RT5392)) {
  			if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
  				rt2800_bbp_write(rt2x00dev, 82, 0x62);
@@ -84,7 +84,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  				rt2800_bbp_write(rt2x00dev, 75, 0x46);
  			} else {
  				if (rt2x00_rt(rt2x00dev, RT3593))
-@@ -3550,19 +3596,22 @@ static void rt2800_config_channel(struct
+@@ -3527,19 +3573,22 @@ static void rt2800_config_channel(struct
  					rt2800_bbp_write(rt2x00dev, 82, 0x84);
  				rt2800_bbp_write(rt2x00dev, 75, 0x50);
  			}
@@ -110,7 +110,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			rt2800_bbp_write(rt2x00dev, 83, 0x9a);
  
  		if (rt2x00_has_cap_external_lna_a(rt2x00dev))
-@@ -3684,6 +3733,23 @@ static void rt2800_config_channel(struct
+@@ -3661,6 +3710,23 @@ static void rt2800_config_channel(struct
  
  		rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
  
diff --git a/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch b/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
index 177312845f..fa646d2faf 100644
--- a/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
+++ b/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix txpower_to_dev function for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    6 ++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    6 ++++--
  1 file changed, 4 insertions(+), 2 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3416,13 +3416,15 @@ static char rt2800_txpower_to_dev(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3393,13 +3393,15 @@ static char rt2800_txpower_to_dev(struct
  				  unsigned int channel,
  				  char txpower)
  {
diff --git a/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch b/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
index 36f0a4cc06..c06876906b 100644
--- a/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
+++ b/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct txpower calculation function
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4635,7 +4635,8 @@ static void rt2800_config_txpower(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4612,7 +4612,8 @@ static void rt2800_config_txpower(struct
  				  struct ieee80211_channel *chan,
  				  int power_level)
  {
diff --git a/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch b/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
index 8119f975b0..74d80ded1d 100644
--- a/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
+++ b/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: hardcode txmixer gain values to zero for
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    6 ++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    6 ++++--
  1 file changed, 4 insertions(+), 2 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7493,7 +7493,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7470,7 +7470,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
  {
  	u16 word;
  
@@ -21,7 +21,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		return 0;
  
  	rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
-@@ -7507,7 +7508,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
+@@ -7484,7 +7485,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
  {
  	u16 word;
  
diff --git a/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch b/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
index 53435aa17e..125928642f 100644
--- a/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
@@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct [RT]XWI size for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    1 +
  1 file changed, 1 insertion(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -558,6 +558,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
  {
  	switch (rt2x00dev->chip.rt) {
diff --git a/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch b/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch
index 08f3f88797..0dcc027ffc 100644
--- a/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch
@@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct beacon base for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -983,7 +983,8 @@ EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
  static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
  					  unsigned int index)
diff --git a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch
index dfbdee7228..6ce224aba2 100644
--- a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct beacon count for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8428,7 +8428,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -8403,7 +8403,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  
diff --git a/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch b/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
index 22f7110a7e..39363685f4 100644
--- a/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
+++ b/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix antenna configuration for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -1961,7 +1961,8 @@ void rt2800_config_ant(struct rt2x00_dev
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -1938,7 +1938,8 @@ void rt2800_config_ant(struct rt2x00_dev
  	rt2800_bbp_write(rt2x00dev, 3, r3);
  	rt2800_bbp_write(rt2x00dev, 1, r1);
  
diff --git a/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch b/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
index 9945f38fbd..f0285874da 100644
--- a/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
+++ b/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix LNA gain configuration for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    6 ++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    6 ++++--
  1 file changed, 4 insertions(+), 2 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -1984,7 +1984,8 @@ static void rt2800_config_lna_gain(struc
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -1961,7 +1961,8 @@ static void rt2800_config_lna_gain(struc
  		rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
  		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
  	} else if (libconf->rf.channel <= 128) {
@@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
  			lna_gain = rt2x00_get_field16(eeprom,
  						      EEPROM_EXT_LNA2_A1);
-@@ -1994,7 +1995,8 @@ static void rt2800_config_lna_gain(struc
+@@ -1971,7 +1972,8 @@ static void rt2800_config_lna_gain(struc
  						      EEPROM_RSSI_BG2_LNA_A1);
  		}
  	} else {
diff --git a/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch b/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
index beadea88b7..ab8c625c13 100644
--- a/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix VGC setup for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |   11 +++++++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   11 +++++++++--
  1 file changed, 9 insertions(+), 2 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4835,7 +4835,8 @@ static u8 rt2800_get_default_vgc(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4812,7 +4812,8 @@ static u8 rt2800_get_default_vgc(struct
  		else
  			vgc = 0x2e + rt2x00dev->lna_gain;
  	} else { /* 5GHZ band */
@@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
  		else if (rt2x00_rt(rt2x00dev, RT5592))
  			vgc = 0x24 + (2 * rt2x00dev->lna_gain);
-@@ -4855,7 +4856,8 @@ static inline void rt2800_set_vgc(struct
+@@ -4832,7 +4833,8 @@ static inline void rt2800_set_vgc(struct
  {
  	if (qual->vgc_level != vgc_level) {
  		if (rt2x00_rt(rt2x00dev, RT3572) ||
@@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
  						       vgc_level);
  		} else if (rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -4902,6 +4904,11 @@ void rt2800_link_tuner(struct rt2x00_dev
+@@ -4879,6 +4881,11 @@ void rt2800_link_tuner(struct rt2x00_dev
  		}
  		break;
  
diff --git a/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch b/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
index a6c0f588f7..49830a12f5 100644
--- a/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
+++ b/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix EEPROM LNA validation for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    9 ++++++---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    9 ++++++---
  1 file changed, 6 insertions(+), 3 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7630,7 +7630,8 @@ static int rt2800_validate_eeprom(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7607,7 +7607,8 @@ static int rt2800_validate_eeprom(struct
  	rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
  	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
  		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
@@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
  		    rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
  			rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-@@ -7650,7 +7651,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7627,7 +7628,8 @@ static int rt2800_validate_eeprom(struct
  	rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
  	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
  		rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
@@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
  		    rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
  			rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-@@ -7658,7 +7660,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7635,7 +7637,8 @@ static int rt2800_validate_eeprom(struct
  	}
  	rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
  
diff --git a/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch b/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
index 910f9ecd2c..6e228479b0 100644
--- a/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
@@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix txpower compensation for RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 +++
  1 file changed, 3 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4005,6 +4005,9 @@ static u8 rt2800_compensate_txpower(stru
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3982,6 +3982,9 @@ static u8 rt2800_compensate_txpower(stru
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		return min_t(u8, txpower, 0xc);
  
diff --git a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch
index bcdfc6728e..25753af81b 100644
--- a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch
+++ b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable RT2800_HAS_HIGH_SHARED_MEM for
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8441,7 +8441,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -8416,7 +8416,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (retval)
  		return retval;
  
diff --git a/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch b/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch
index dc06e6a64b..4f2e754869 100644
--- a/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch
+++ b/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch
@@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use high memory for beacons on RT3883
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -97,7 +97,8 @@ static inline void rt2800_shared_mem_sel
  
  static inline bool rt2800_beacon_uses_high_mem(struct rt2x00_dev *rt2x00dev)
diff --git a/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch b/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch
index 212eb4e744..a497b5eead 100644
--- a/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch
+++ b/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800mmio: add a workaround for spurious
 
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800mmio.c |   72 +++++++++++++++++++++++++-----
- drivers/net/wireless/rt2x00/rt2x00.h     |    5 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800mmio.c |   72 +++++++++++++++++++++++++-----
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h     |    5 +++
  2 files changed, 65 insertions(+), 12 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/rt2x00/rt2800mmio.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
 @@ -415,9 +415,9 @@ void rt2800mmio_autowake_tasklet(unsigne
  }
  EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
@@ -120,9 +120,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		/*
  		 * Never disable the TX_FIFO_STATUS interrupt.
  		 */
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -987,6 +987,11 @@ struct rt2x00_dev {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -991,6 +991,11 @@ struct rt2x00_dev {
  	int rf_channel;
  
  	/*
diff --git a/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch b/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch
index 08c8fa651c..a40716163f 100644
--- a/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch
+++ b/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2x00pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.c
 @@ -94,8 +94,10 @@ int rt2x00pci_probe(struct pci_dev *pci_
  
  	pci_set_master(pci_dev);
diff --git a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch
index 8c71075b5c..7a183a404b 100644
--- a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch
+++ b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch
@@ -20,8 +20,8 @@
 +};
 +
 +#endif /* _RT2X00_PLATFORM_H */
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 @@ -38,6 +38,7 @@
  #include <linux/kfifo.h>
  #include <linux/hrtimer.h>
diff --git a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch
index 8f650a28e5..bc056cd735 100644
--- a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch
+++ b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch
@@ -1,15 +1,15 @@
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -263,6 +263,7 @@ RT2X00_LIB_FIRMWARE=
+@@ -329,6 +329,7 @@ RT2X00_LIB_FIRMWARE=
  RT2X00_LIB_CRYPTO=
  RT2X00_LIB_LEDS=
  RT2X00_LIB_DEBUGFS=
 +RT2X00_LIB_EEPROM=
  RT2X00_DEBUG=
- RTL_CARDS=
- RTL8192CE=
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+ WLAN_VENDOR_REALTEK=
+ RTL8180=
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
 @@ -69,6 +69,7 @@ config RT2800PCI
  	select RT2X00_LIB_MMIO
  	select RT2X00_LIB_PCI
@@ -26,7 +26,7 @@
  	select RT2800_LIB
  	select RT2800_LIB_MMIO
  	---help---
-@@ -266,6 +268,9 @@ config RT2X00_LIB_FIRMWARE
+@@ -265,6 +267,9 @@ config RT2X00_LIB_FIRMWARE
  config RT2X00_LIB_CRYPTO
  	bool
  
@@ -36,8 +36,8 @@
  config RT2X00_LIB_LEDS
  	bool
  	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
---- a/drivers/net/wireless/rt2x00/Makefile
-+++ b/drivers/net/wireless/rt2x00/Makefile
+--- a/drivers/net/wireless/ralink/rt2x00/Makefile
++++ b/drivers/net/wireless/ralink/rt2x00/Makefile
 @@ -7,6 +7,7 @@ rt2x00lib-$(CPTCFG_RT2X00_LIB_DEBUGFS)	+
  rt2x00lib-$(CPTCFG_RT2X00_LIB_CRYPTO)	+= rt2x00crypto.o
  rt2x00lib-$(CPTCFG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
@@ -46,9 +46,9 @@
  
  obj-$(CPTCFG_RT2X00_LIB)		+= rt2x00lib.o
  obj-$(CPTCFG_RT2X00_LIB_MMIO)		+= rt2x00mmio.o
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -43,6 +43,8 @@ struct rt2800_drv_data {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -46,6 +46,8 @@ struct rt2800_drv_data {
  	} shmem_lock;
  };
  
@@ -57,7 +57,7 @@
  struct rt2800_ops {
  	void (*register_read)(struct rt2x00_dev *rt2x00dev,
  			      const unsigned int offset, u32 *value);
-@@ -176,6 +178,15 @@ static inline int rt2800_read_eeprom(str
+@@ -179,6 +181,15 @@ static inline int rt2800_read_eeprom(str
  {
  	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
  
@@ -73,8 +73,8 @@
  	return rt2800ops->read_eeprom(rt2x00dev);
  }
  
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
 @@ -102,19 +102,6 @@ static int rt2800soc_set_device_state(st
  	return retval;
  }
@@ -103,9 +103,9 @@
  	.hwcrypt_disabled	= rt2800soc_hwcrypt_disabled,
  	.drv_write_firmware	= rt2800soc_write_firmware,
  	.drv_init_registers	= rt2800mmio_init_registers,
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -695,6 +695,7 @@ enum rt2x00_capability_flags {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -697,6 +697,7 @@ enum rt2x00_capability_flags {
  	REQUIRE_HT_TX_DESC,
  	REQUIRE_PS_AUTOWAKE,
  	REQUIRE_DELAYED_RFKILL,
@@ -113,7 +113,7 @@
  
  	/*
  	 * Capabilities
-@@ -964,6 +965,11 @@ struct rt2x00_dev {
+@@ -968,6 +969,11 @@ struct rt2x00_dev {
  	const struct firmware *fw;
  
  	/*
@@ -125,9 +125,9 @@
  	 * FIFO for storing tx status reports between isr and tasklet.
  	 */
  	DECLARE_KFIFO_PTR(txstatus_fifo, u32);
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -1334,6 +1334,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -1335,6 +1335,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
  	INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
  	INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
  
@@ -138,7 +138,7 @@
  	/*
  	 * Let the driver probe the device to detect the capabilities.
  	 */
-@@ -1474,6 +1478,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
+@@ -1475,6 +1479,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
  	 * Free the driver data.
  	 */
  	kfree(rt2x00dev->drv_data);
@@ -151,7 +151,7 @@
  EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
  
 --- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
 @@ -0,0 +1,111 @@
 +/*
 +	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
@@ -264,8 +264,8 @@
 +	release_firmware(rt2x00dev->eeprom_file);
 +	rt2x00dev->eeprom_file = NULL;
 +}
---- a/drivers/net/wireless/rt2x00/rt2x00lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h
 @@ -320,6 +320,22 @@ static inline void rt2x00lib_free_firmwa
  #endif /* CPTCFG_RT2X00_LIB_FIRMWARE */
  
@@ -289,8 +289,8 @@
   * Debugfs handlers.
   */
  #ifdef CPTCFG_RT2X00_LIB_DEBUGFS
---- a/drivers/net/wireless/rt2x00/rt2x00soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
 @@ -92,6 +92,7 @@ int rt2x00soc_probe(struct platform_devi
  	rt2x00dev->hw = hw;
  	rt2x00dev->irq = platform_get_irq(pdev, 0);
diff --git a/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch b/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch
index 4bc6f37adb..9dffef1812 100644
--- a/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch
+++ b/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2x00eeprom.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
 @@ -26,6 +26,7 @@
  
  #include <linux/kernel.h>
diff --git a/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch b/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch
index 75f0415b73..5dceff8794 100644
--- a/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch
+++ b/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch
@@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: load eeprom on SoC from a mtd device defines inside
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/Kconfig     |    1 +
- drivers/net/wireless/rt2x00/rt2800pci.c |   44 ++++++++++++++++++++++++++-----
+ drivers/net/wireless/ralink/rt2x00/Kconfig     |    1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800pci.c |   44 ++++++++++++++++++++++++++-----
  2 files changed, 39 insertions(+), 6 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
 @@ -219,6 +219,7 @@ config RT2800SOC
  	select RT2X00_LIB_EEPROM
  	select RT2800_LIB
@@ -20,8 +20,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	---help---
  	  This adds support for Ralink WiSoC devices.
  	  Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352.
---- a/drivers/net/wireless/rt2x00/rt2x00eeprom.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
 @@ -26,11 +26,66 @@
  
  #include <linux/kernel.h>
@@ -79,7 +79,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	if (!ret) {
 +		rt2x00dev->eeprom_file = &mtd_fw;
 +		mtd_fw.size = len;
-+		mtd_fw.data = rt2x00dev->eeprom;
++		mtd_fw.data = (const u8 *) rt2x00dev->eeprom;
 +	}
 +#endif
 +
diff --git a/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch b/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch
index 70f7b783ad..d923e05c77 100644
--- a/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch
+++ b/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch
@@ -10,8 +10,8 @@
  };
  
  #endif /* _RT2X00_PLATFORM_H */
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
 @@ -940,6 +940,22 @@ static int rt2x00lib_probe_hw_modes(stru
  	unsigned int num_rates;
  	unsigned int i;
@@ -35,9 +35,9 @@
  	num_rates = 0;
  	if (spec->supported_rates & SUPPORT_RATE_CCK)
  		num_rates += 4;
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -403,6 +403,7 @@ struct hw_mode_spec {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -405,6 +405,7 @@ struct hw_mode_spec {
  	unsigned int supported_bands;
  #define SUPPORT_BAND_2GHZ	0x00000001
  #define SUPPORT_BAND_5GHZ	0x00000002
diff --git a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch
index a35bd55a7c..a645ba176e 100644
--- a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch
+++ b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch
@@ -8,8 +8,8 @@
  
  	int disable_2ghz;
  	int disable_5ghz;
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
 @@ -931,6 +931,18 @@ static void rt2x00lib_rate(struct ieee80
  		entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
  }
@@ -29,9 +29,9 @@
  static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
  				    struct hw_mode_spec *spec)
  {
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -1410,6 +1410,7 @@ static inline void rt2x00debug_dump_fram
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -1414,6 +1414,7 @@ static inline void rt2x00debug_dump_fram
   */
  u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
  			 struct ieee80211_vif *vif);
@@ -39,8 +39,8 @@
  
  /*
   * Interrupt context handlers.
---- a/drivers/net/wireless/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/rt2x00/rt61pci.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
 @@ -2392,6 +2392,7 @@ static int rt61pci_validate_eeprom(struc
  	u32 reg;
  	u16 word;
diff --git a/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch b/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch
index 63a8641464..3fdaae759b 100644
--- a/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch
+++ b/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
 @@ -26,6 +26,7 @@
  #include <linux/module.h>
  #include <linux/slab.h>
diff --git a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch
index 067d2eaf73..c69d33025d 100644
--- a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch
+++ b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch
@@ -1,6 +1,6 @@
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3552,11 +3552,18 @@ static void rt2800_config_channel(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3529,11 +3529,18 @@ static void rt2800_config_channel(struct
  	/*
  	 * Change BBP settings
  	 */
@@ -19,7 +19,7 @@
  	} else if (rt2x00_rt(rt2x00dev, RT3593)) {
  		if (rf->channel > 14) {
  			/* Disable CCK Packet detection on 5GHz */
-@@ -6618,6 +6625,12 @@ static void rt2800_init_rfcsr_3290(struc
+@@ -6595,6 +6602,12 @@ static void rt2800_init_rfcsr_3290(struc
  
  static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
  {
@@ -32,7 +32,7 @@
  	rt2800_rf_init_calibration(rt2x00dev, 30);
  
  	rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
-@@ -6653,15 +6666,30 @@ static void rt2800_init_rfcsr_3352(struc
+@@ -6630,15 +6643,30 @@ static void rt2800_init_rfcsr_3352(struc
  	rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
  	rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
  	rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
@@ -66,7 +66,7 @@
  	rt2800_rfcsr_write(rt2x00dev, 43, 0xdb);
  	rt2800_rfcsr_write(rt2x00dev, 44, 0xdb);
  	rt2800_rfcsr_write(rt2x00dev, 45, 0xdb);
-@@ -6669,15 +6697,20 @@ static void rt2800_init_rfcsr_3352(struc
+@@ -6646,15 +6674,20 @@ static void rt2800_init_rfcsr_3352(struc
  	rt2800_rfcsr_write(rt2x00dev, 47, 0x0d);
  	rt2800_rfcsr_write(rt2x00dev, 48, 0x14);
  	rt2800_rfcsr_write(rt2x00dev, 49, 0x00);
@@ -96,7 +96,7 @@
  	rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
  	rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
  	rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
-@@ -7698,6 +7731,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7675,6 +7708,7 @@ static int rt2800_init_eeprom(struct rt2
  	 * RT53xx: defined in "EEPROM_CHIP_ID" field
  	 */
  	if (rt2x00_rt(rt2x00dev, RT3290) ||
@@ -104,7 +104,7 @@
  	    rt2x00_rt(rt2x00dev, RT5390) ||
  	    rt2x00_rt(rt2x00dev, RT5392))
  		rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
-@@ -7793,7 +7827,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7770,7 +7804,8 @@ static int rt2800_init_eeprom(struct rt2
  	/*
  	 * Detect if this device has Bluetooth co-existence.
  	 */
@@ -114,7 +114,7 @@
  		__set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
  
  	/*
-@@ -7822,6 +7857,22 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7799,6 +7834,22 @@ static int rt2800_init_eeprom(struct rt2
  					EIRP_MAX_TX_POWER_LIMIT)
  		__set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
  
@@ -137,8 +137,8 @@
  	return 0;
  }
  
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -2335,6 +2335,12 @@ struct mac_iveiv_entry {
  #define RFCSR36_RF_BS			FIELD8(0x80)
  
@@ -198,9 +198,9 @@
  
  /*
   * EEPROM frequency
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -715,6 +715,8 @@ enum rt2x00_capability_flags {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -717,6 +717,8 @@ enum rt2x00_capability_flags {
  	CAPABILITY_DOUBLE_ANTENNA,
  	CAPABILITY_BT_COEXIST,
  	CAPABILITY_VCO_RECALIBRATION,
diff --git a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch
index 1dcca36c21..b44fe900d5 100644
--- a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch
+++ b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch
@@ -1,6 +1,6 @@
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8209,6 +8209,27 @@ static const struct rf_channel rf_vals_5
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -8186,6 +8186,27 @@ static const struct rf_channel rf_vals_5
  	{196, 83, 0, 12, 1},
  };
  
@@ -28,7 +28,7 @@
  static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
  {
  	struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -8297,7 +8318,10 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8272,7 +8293,10 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5390:
  	case RF5392:
  		spec->num_channels = 14;
@@ -40,7 +40,7 @@
  		break;
  
  	case RF3052:
-@@ -8481,6 +8505,19 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8456,6 +8480,19 @@ static int rt2800_probe_rt(struct rt2x00
  	return 0;
  }
  
@@ -60,7 +60,7 @@
  int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
  {
  	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-@@ -8523,6 +8560,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -8498,6 +8535,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
  
  	/*
@@ -76,9 +76,9 @@
  	 * Initialize hw specifications.
  	 */
  	retval = rt2800_probe_hw_mode(rt2x00dev);
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -398,6 +398,7 @@ static inline struct rt2x00_intf* vif_to
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -400,6 +400,7 @@ static inline struct rt2x00_intf* vif_to
   * @channels: Device/chipset specific channel values (See &struct rf_channel).
   * @channels_info: Additional information for channels (See &struct channel_info).
   * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap).
@@ -86,7 +86,7 @@
   */
  struct hw_mode_spec {
  	unsigned int supported_bands;
-@@ -414,6 +415,7 @@ struct hw_mode_spec {
+@@ -416,6 +417,7 @@ struct hw_mode_spec {
  	const struct channel_info *channels_info;
  
  	struct ieee80211_sta_ht_cap ht;
diff --git a/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch b/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch
index 1970efc08c..e4b028b1a9 100644
--- a/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch
+++ b/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch
@@ -8,11 +8,11 @@ devicetree.
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
- drivers/net/wireless/rt2x00/rt2800pci.c |    7 +++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800pci.c |    7 +++++++
  1 file changed, 7 insertions(+)
 
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
 @@ -237,10 +237,17 @@ static int rt2800soc_probe(struct platfo
  	return rt2x00soc_probe(pdev, &rt2800soc_ops);
  }
diff --git a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch
index c779a1732c..8e3bd2a362 100644
--- a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch
+++ b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -36,6 +36,7 @@
  #include <linux/kernel.h>
  #include <linux/module.h>
@@ -8,7 +8,7 @@
  
  #include "rt2x00.h"
  #include "rt2800lib.h"
-@@ -8507,13 +8508,14 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8482,13 +8483,14 @@ static int rt2800_probe_rt(struct rt2x00
  
  int rt2800_probe_clk(struct rt2x00_dev *rt2x00dev)
  {
diff --git a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch
index 840b3bc964..faa5879de6 100644
--- a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch
+++ b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -74,6 +74,7 @@
  #define RF3070				0x3070
  #define RF3290				0x3290
@@ -8,9 +8,9 @@
  #define RF5360				0x5360
  #define RF5362				0x5362
  #define RF5370				0x5370
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3038,6 +3038,13 @@ static void rt2800_config_channel_rf53xx
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3015,6 +3015,13 @@ static void rt2800_config_channel_rf53xx
  
  				rt2800_rfcsr_write(rt2x00dev, 59,
  						   r59_non_bt[idx]);
@@ -24,7 +24,7 @@
  			}
  		}
  	}
-@@ -3516,6 +3523,7 @@ static void rt2800_config_channel(struct
+@@ -3493,6 +3500,7 @@ static void rt2800_config_channel(struct
  		rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
  		break;
  	case RF3070:
@@ -32,7 +32,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -3534,6 +3542,7 @@ static void rt2800_config_channel(struct
+@@ -3511,6 +3519,7 @@ static void rt2800_config_channel(struct
  	if (rt2x00_rf(rt2x00dev, RF3070) ||
  	    rt2x00_rf(rt2x00dev, RF3290) ||
  	    rt2x00_rf(rt2x00dev, RF3322) ||
@@ -40,7 +40,7 @@
  	    rt2x00_rf(rt2x00dev, RF5360) ||
  	    rt2x00_rf(rt2x00dev, RF5362) ||
  	    rt2x00_rf(rt2x00dev, RF5370) ||
-@@ -3812,7 +3821,8 @@ static void rt2800_config_channel(struct
+@@ -3789,7 +3798,8 @@ static void rt2800_config_channel(struct
  	/*
  	 * Clear update flag
  	 */
@@ -50,7 +50,7 @@
  		rt2800_bbp_read(rt2x00dev, 49, &bbp);
  		rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0);
  		rt2800_bbp_write(rt2x00dev, 49, bbp);
-@@ -4698,6 +4708,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4675,6 +4685,7 @@ void rt2800_vco_calibration(struct rt2x0
  	case RF3070:
  	case RF3290:
  	case RF3853:
@@ -58,7 +58,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -5111,6 +5122,8 @@ static int rt2800_init_registers(struct
+@@ -5088,6 +5099,8 @@ static int rt2800_init_registers(struct
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
  		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
  		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -67,7 +67,7 @@
  	} else {
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
  		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-@@ -5766,9 +5779,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5743,9 +5756,13 @@ static void rt2800_init_bbp_3352(struct
  
  	rt2800_bbp_write(rt2x00dev, 82, 0x62);
  
@@ -84,7 +84,7 @@
  
  	rt2800_bbp_write(rt2x00dev, 86, 0x38);
  
-@@ -5782,9 +5799,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5759,9 +5776,13 @@ static void rt2800_init_bbp_3352(struct
  
  	rt2800_bbp_write(rt2x00dev, 104, 0x92);
  
@@ -101,7 +101,7 @@
  
  	rt2800_bbp_write(rt2x00dev, 120, 0x50);
  
-@@ -5809,6 +5830,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5786,6 +5807,13 @@ static void rt2800_init_bbp_3352(struct
  	rt2800_bbp_write(rt2x00dev, 143, 0xa2);
  
  	rt2800_bbp_write(rt2x00dev, 148, 0xc8);
@@ -115,7 +115,7 @@
  }
  
  static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev)
-@@ -6150,6 +6178,7 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6127,6 +6155,7 @@ static void rt2800_init_bbp(struct rt2x0
  		rt2800_init_bbp_3290(rt2x00dev);
  		break;
  	case RT3352:
@@ -123,7 +123,7 @@
  		rt2800_init_bbp_3352(rt2x00dev);
  		break;
  	case RT3390:
-@@ -7101,6 +7130,76 @@ static void rt2800_init_rfcsr_3883(struc
+@@ -7078,6 +7107,76 @@ static void rt2800_init_rfcsr_3883(struc
  	rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
  }
  
@@ -200,7 +200,7 @@
  static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
  {
  	rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -7341,6 +7440,9 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7318,6 +7417,9 @@ static void rt2800_init_rfcsr(struct rt2
  	case RT3593:
  		rt2800_init_rfcsr_3593(rt2x00dev);
  		break;
@@ -210,7 +210,7 @@
  	case RT5390:
  		rt2800_init_rfcsr_5390(rt2x00dev);
  		break;
-@@ -7600,6 +7702,12 @@ static int rt2800_validate_eeprom(struct
+@@ -7577,6 +7679,12 @@ static int rt2800_validate_eeprom(struct
  		rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
  		rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
  		rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
@@ -223,7 +223,7 @@
  	} else if (rt2x00_rt(rt2x00dev, RT2860) ||
  		   rt2x00_rt(rt2x00dev, RT2872)) {
  		/*
-@@ -7738,6 +7846,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7715,6 +7823,8 @@ static int rt2800_init_eeprom(struct rt2
  		rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
  	else if (rt2x00_rt(rt2x00dev, RT3883))
  		rf = RF3853;
@@ -232,7 +232,7 @@
  	else
  		rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
  
-@@ -7757,6 +7867,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7734,6 +7844,7 @@ static int rt2800_init_eeprom(struct rt2
  	case RF3320:
  	case RF3322:
  	case RF3853:
@@ -240,7 +240,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -8312,6 +8423,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8287,6 +8398,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF3290:
  	case RF3320:
  	case RF3322:
@@ -248,7 +248,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -8451,6 +8563,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8426,6 +8538,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF3070:
  	case RF3290:
  	case RF3853:
@@ -256,7 +256,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -8491,6 +8604,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8466,6 +8579,7 @@ static int rt2800_probe_rt(struct rt2x00
  	case RT3572:
  	case RT3593:
  	case RT3883:
@@ -264,8 +264,8 @@
  	case RT5390:
  	case RT5392:
  	case RT5592:
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 @@ -169,6 +169,7 @@ struct rt2x00_chip {
  #define RT3572		0x3572
  #define RT3593		0x3593
diff --git a/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch
index 13f2048e60..6094a613b2 100644
--- a/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch
+++ b/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -37,6 +37,7 @@
  #include <linux/module.h>
  #include <linux/slab.h>
@@ -8,7 +8,7 @@
  
  #include "rt2x00.h"
  #include "rt2800lib.h"
-@@ -7957,6 +7958,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7934,6 +7935,17 @@ static int rt2800_init_eeprom(struct rt2
  	rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
  	rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
  
@@ -26,8 +26,8 @@
  	rt2x00dev->led_mcu_reg = eeprom;
  #endif /* CPTCFG_RT2X00_LIB_LEDS */
  
---- a/drivers/net/wireless/rt2x00/rt2x00leds.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
 @@ -109,6 +109,9 @@ static int rt2x00leds_register_led(struc
  	led->led_dev.name = name;
  	led->led_dev.brightness = LED_OFF;
diff --git a/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch
index 2dbfd10f70..55452b9ebd 100644
--- a/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch
+++ b/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch
@@ -1,6 +1,6 @@
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -1283,7 +1283,7 @@ static inline void rt2x00lib_set_if_comb
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -1284,7 +1284,7 @@ static inline void rt2x00lib_set_if_comb
  	 */
  	if_limit = &rt2x00dev->if_limits_ap;
  	if_limit->max = rt2x00dev->ops->max_ap_intf;
diff --git a/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch b/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch
index aaa8367a6a..8ddf425850 100644
--- a/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch
+++ b/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch
@@ -1,6 +1,6 @@
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7841,10 +7841,11 @@ static int rt2800_init_eeprom(struct rt2
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -7818,10 +7818,11 @@ static int rt2800_init_eeprom(struct rt2
  	 * RT53xx: defined in "EEPROM_CHIP_ID" field
  	 */
  	if (rt2x00_rt(rt2x00dev, RT3290) ||
diff --git a/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch b/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch
index bb2fc1ca95..e3e4c98efc 100644
--- a/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch
+++ b/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -2321,6 +2321,8 @@ struct mac_iveiv_entry {
  #define RFCSR30_RX_H20M			FIELD8(0x04)
  #define RFCSR30_RX_VCM			FIELD8(0x18)
@@ -9,9 +9,9 @@
  
  /*
   * RFCSR 31:
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3551,8 +3551,13 @@ static void rt2800_config_channel(struct
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3528,8 +3528,13 @@ static void rt2800_config_channel(struct
  	    rt2x00_rf(rt2x00dev, RF5390) ||
  	    rt2x00_rf(rt2x00dev, RF5392)) {
  		rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
diff --git a/package/kernel/mac80211/patches/622-rt2x00-fix-beacon-bit-balance.patch b/package/kernel/mac80211/patches/622-rt2x00-fix-beacon-bit-balance.patch
new file mode 100644
index 0000000000..3cf6268155
--- /dev/null
+++ b/package/kernel/mac80211/patches/622-rt2x00-fix-beacon-bit-balance.patch
@@ -0,0 +1,47 @@
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
+@@ -627,12 +627,8 @@ void rt2x00mac_bss_info_changed(struct i
+ 		} else if (bss_conf->enable_beacon && !intf->enable_beacon) {
+ 			rt2x00dev->intf_beaconing++;
+ 			intf->enable_beacon = true;
+-			/*
+-			 * Upload beacon to the H/W. This is only required on
+-			 * USB devices. PCI devices fetch beacons periodically.
+-			 */
+-			if (rt2x00_is_usb(rt2x00dev))
+-				rt2x00queue_update_beacon(rt2x00dev, vif);
++
++			rt2x00queue_update_beacon(rt2x00dev, vif);
+ 
+ 			if (rt2x00dev->intf_beaconing == 1) {
+ 				/*
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -144,7 +144,8 @@ static void rt2x00lib_intf_scheduled_ite
+ 
+ 	if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags)) {
+ 		mutex_lock(&intf->beacon_skb_mutex);
+-		rt2x00queue_update_beacon(rt2x00dev, vif);
++		if (intf->enable_beacon)
++			rt2x00queue_update_beacon(rt2x00dev, vif);
+ 		mutex_unlock(&intf->beacon_skb_mutex);
+ 	}
+ }
+@@ -207,6 +208,7 @@ static void rt2x00lib_beaconupdate_iter(
+ 					struct ieee80211_vif *vif)
+ {
+ 	struct rt2x00_dev *rt2x00dev = data;
++	struct rt2x00_intf *intf = vif_to_intf(vif);
+ 
+ 	if (vif->type != NL80211_IFTYPE_AP &&
+ 	    vif->type != NL80211_IFTYPE_ADHOC &&
+@@ -220,7 +222,8 @@ static void rt2x00lib_beaconupdate_iter(
+ 	 * never be called for USB devices.
+ 	 */
+ 	WARN_ON(rt2x00_is_usb(rt2x00dev));
+-	rt2x00queue_update_beacon(rt2x00dev, vif);
++	if (intf->enable_beacon)
++		rt2x00queue_update_beacon(rt2x00dev, vif);
+ }
+ 
+ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
diff --git a/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch b/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch
index f2a766328e..a901a44ba4 100644
--- a/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch
+++ b/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch
@@ -1,6 +1,6 @@
---- a/drivers/net/wireless/mwl8k.c
-+++ b/drivers/net/wireless/mwl8k.c
-@@ -5678,6 +5678,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
+--- a/drivers/net/wireless/marvell/mwl8k.c
++++ b/drivers/net/wireless/marvell/mwl8k.c
+@@ -5681,6 +5681,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
  MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
  
  static const struct pci_device_id mwl8k_pci_id_table[] = {
diff --git a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
index 9e29034e8c..fd885cc002 100644
--- a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
+++ b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/libertas/cfg.c
-+++ b/drivers/net/wireless/libertas/cfg.c
+--- a/drivers/net/wireless/marvell/libertas/cfg.c
++++ b/drivers/net/wireless/marvell/libertas/cfg.c
 @@ -2084,6 +2084,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
  		goto err_wiphy_new;
  	}
@@ -9,8 +9,8 @@
  	lbs_deb_leave(LBS_DEB_CFG80211);
  	return wdev;
  
---- a/drivers/net/wireless/libertas/main.c
-+++ b/drivers/net/wireless/libertas/main.c
+--- a/drivers/net/wireless/marvell/libertas/main.c
++++ b/drivers/net/wireless/marvell/libertas/main.c
 @@ -987,6 +987,7 @@ struct lbs_private *lbs_add_card(void *c
  		goto err_adapter;
  	}
diff --git a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
index 252fa810b0..b67a95f948 100644
--- a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
+++ b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/libertas/cfg.c
-+++ b/drivers/net/wireless/libertas/cfg.c
+--- a/drivers/net/wireless/marvell/libertas/cfg.c
++++ b/drivers/net/wireless/marvell/libertas/cfg.c
 @@ -2174,6 +2174,8 @@ int lbs_cfg_register(struct lbs_private
  	wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
  	wdev->wiphy->reg_notifier = lbs_reg_notifier;
diff --git a/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch b/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch
new file mode 100644
index 0000000000..74cd4489f1
--- /dev/null
+++ b/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch
@@ -0,0 +1,17 @@
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
+@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str
+ 	case B43_BUS_BCMA:
+ 		bcma_cc = &dev->dev->bdev->bus->drv_cc;
+ 
+-		bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0);
+-		bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
+-		bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4);
+-		bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
++		bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0);
++		bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
++		bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4);
++		bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
+ 		break;
+ #endif
+ #ifdef CPTCFG_B43_SSB
diff --git a/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch
index 95867ef8da..fd9e6fd974 100644
--- a/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch
+++ b/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/b43/b43.h
-+++ b/drivers/net/wireless/b43/b43.h
+--- a/drivers/net/wireless/broadcom/b43/b43.h
++++ b/drivers/net/wireless/broadcom/b43/b43.h
 @@ -839,6 +839,7 @@ struct b43_wldev {
  	bool qos_enabled;		/* TRUE, if QoS is used. */
  	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
@@ -8,9 +8,9 @@
  
  	/* PHY/Radio device. */
  	struct b43_phy phy;
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -76,6 +76,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw");
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
+@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw");
  MODULE_FIRMWARE("b43/ucode5.fw");
  MODULE_FIRMWARE("b43/ucode9.fw");
  
diff --git a/package/kernel/mac80211/patches/810-b43_no_pio.patch b/package/kernel/mac80211/patches/810-b43_no_pio.patch
index 0979100d4c..79428c2784 100644
--- a/package/kernel/mac80211/patches/810-b43_no_pio.patch
+++ b/package/kernel/mac80211/patches/810-b43_no_pio.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/b43/Makefile
-+++ b/drivers/net/wireless/b43/Makefile
+--- a/drivers/net/wireless/broadcom/b43/Makefile
++++ b/drivers/net/wireless/broadcom/b43/Makefile
 @@ -17,7 +17,7 @@ b43-$(CPTCFG_B43_PHY_AC)	+= phy_ac.o
  b43-y				+= sysfs.o
  b43-y				+= xmit.o
@@ -9,8 +9,8 @@
  b43-y				+= rfkill.o
  b43-y				+= ppr.o
  b43-$(CPTCFG_B43_LEDS)		+= leds.o
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
 @@ -2008,10 +2008,12 @@ static void b43_do_interrupt_thread(stru
  			dma_reason[0], dma_reason[1],
  			dma_reason[2], dma_reason[3],
@@ -24,8 +24,8 @@
  		b43_controller_restart(dev, "DMA error");
  		return;
  	}
---- a/drivers/net/wireless/b43/pio.h
-+++ b/drivers/net/wireless/b43/pio.h
+--- a/drivers/net/wireless/broadcom/b43/pio.h
++++ b/drivers/net/wireless/broadcom/b43/pio.h
 @@ -150,7 +150,7 @@ static inline void b43_piorx_write32(str
  	b43_write32(q->dev, q->mmio_base + offset, value);
  }
@@ -73,9 +73,9 @@
 +#endif /* CPTCFG_B43_PIO */
  
  #endif /* B43_PIO_H_ */
---- a/drivers/net/wireless/b43/Kconfig
-+++ b/drivers/net/wireless/b43/Kconfig
-@@ -118,7 +118,7 @@ config B43_BCMA_PIO
+--- a/drivers/net/wireless/broadcom/b43/Kconfig
++++ b/drivers/net/wireless/broadcom/b43/Kconfig
+@@ -98,7 +98,7 @@ config B43_BCMA_PIO
  	default y
  
  config B43_PIO
diff --git a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
index ac58dba19b..06c731fce6 100644
--- a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
+++ b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
 @@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st
  				  len, ram_offset, shm_size_offset, rate);
  
@@ -9,7 +9,7 @@
  	antenna = b43_antenna_to_phyctl(antenna);
  	ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
  	/* We can't send beacons with short preamble. Would get PHY errors. */
-@@ -3302,8 +3302,8 @@ static int b43_chip_init(struct b43_wlde
+@@ -3300,8 +3300,8 @@ static int b43_chip_init(struct b43_wlde
  
  	/* Select the antennae */
  	if (phy->ops->set_rx_antenna)
@@ -20,7 +20,7 @@
  
  	if (phy->type == B43_PHYTYPE_B) {
  		value16 = b43_read16(dev, 0x005E);
-@@ -4003,7 +4003,6 @@ static int b43_op_config(struct ieee8021
+@@ -4001,7 +4001,6 @@ static int b43_op_config(struct ieee8021
  	struct b43_wldev *dev = wl->current_dev;
  	struct b43_phy *phy = &dev->phy;
  	struct ieee80211_conf *conf = &hw->conf;
@@ -28,7 +28,7 @@
  	int err = 0;
  
  	mutex_lock(&wl->mutex);
-@@ -4046,11 +4045,9 @@ static int b43_op_config(struct ieee8021
+@@ -4044,11 +4043,9 @@ static int b43_op_config(struct ieee8021
  	}
  
  	/* Antennas for RX and management frame TX. */
@@ -42,7 +42,7 @@
  
  	if (wl->radio_enabled != phy->radio_on) {
  		if (wl->radio_enabled) {
-@@ -5213,6 +5210,47 @@ static int b43_op_get_survey(struct ieee
+@@ -5209,6 +5206,47 @@ static int b43_op_get_survey(struct ieee
  	return 0;
  }
  
@@ -90,7 +90,7 @@
  static const struct ieee80211_ops b43_hw_ops = {
  	.tx			= b43_op_tx,
  	.conf_tx		= b43_op_conf_tx,
-@@ -5234,6 +5272,8 @@ static const struct ieee80211_ops b43_hw
+@@ -5230,6 +5268,8 @@ static const struct ieee80211_ops b43_hw
  	.sw_scan_complete	= b43_op_sw_scan_complete_notifier,
  	.get_survey		= b43_op_get_survey,
  	.rfkill_poll		= b43_rfkill_poll,
@@ -99,7 +99,7 @@
  };
  
  /* Hard-reset the chip. Do not call this directly.
-@@ -5542,6 +5582,8 @@ static int b43_one_core_attach(struct b4
+@@ -5538,6 +5578,8 @@ static int b43_one_core_attach(struct b4
  	if (!wldev)
  		goto out;
  
@@ -108,7 +108,7 @@
  	wldev->use_pio = b43_modparam_pio;
  	wldev->dev = dev;
  	wldev->wl = wl;
-@@ -5632,6 +5674,9 @@ static struct b43_wl *b43_wireless_init(
+@@ -5628,6 +5670,9 @@ static struct b43_wl *b43_wireless_init(
  
  	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
  
@@ -118,8 +118,8 @@
  	wl->hw_registred = false;
  	hw->max_rates = 2;
  	SET_IEEE80211_DEV(hw, dev->dev);
---- a/drivers/net/wireless/b43/b43.h
-+++ b/drivers/net/wireless/b43/b43.h
+--- a/drivers/net/wireless/broadcom/b43/b43.h
++++ b/drivers/net/wireless/broadcom/b43/b43.h
 @@ -840,6 +840,8 @@ struct b43_wldev {
  	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
  	bool use_pio;			/* TRUE if next init should use PIO */
diff --git a/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch b/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch
index 9c51ac63d7..5899706896 100644
--- a/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch
+++ b/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/b43/dma.h
-+++ b/drivers/net/wireless/b43/dma.h
+--- a/drivers/net/wireless/broadcom/b43/dma.h
++++ b/drivers/net/wireless/broadcom/b43/dma.h
 @@ -169,7 +169,7 @@ struct b43_dmadesc_generic {
  
  /* DMA engine tuning knobs */
diff --git a/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch
index d4f9a8892b..8d0c0412d2 100644
--- a/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch
+++ b/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
 @@ -2899,6 +2899,14 @@ static int b43_gpio_init(struct b43_wlde
  	} else if (dev->dev->chip_id == 0x5354) {
  		/* Don't allow overtaking buttons GPIOs */
diff --git a/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch
index 9d1d419460..ef7f3c92d2 100644
--- a/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch
+++ b/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch
@@ -1,6 +1,6 @@
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -118,7 +118,7 @@ static int b43_modparam_pio = 0;
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
+@@ -117,7 +117,7 @@ static int b43_modparam_pio = 0;
  module_param_named(pio, b43_modparam_pio, int, 0644);
  MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
  
diff --git a/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch b/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch
index 185c4279e9..3c93386b30 100644
--- a/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch
+++ b/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
 @@ -58,19 +58,12 @@
  				 (((c) < 149) ? 3 : 4))))
  
diff --git a/package/kernel/mac80211/patches/860-brcmfmac-use-bcm47xx-platform-NVRAM-as-fallback.patch b/package/kernel/mac80211/patches/860-brcmfmac-use-bcm47xx-platform-NVRAM-as-fallback.patch
deleted file mode 100644
index 44bb779fd1..0000000000
--- a/package/kernel/mac80211/patches/860-brcmfmac-use-bcm47xx-platform-NVRAM-as-fallback.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 8 Jun 2015 16:59:31 +0200
-Subject: [PATCH] brcmfmac: use bcm47xx platform NVRAM as fallback
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -19,6 +19,9 @@
- #include <linux/device.h>
- #include <linux/firmware.h>
- #include <linux/module.h>
-+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM)
-+#include <linux/bcm47xx_nvram.h>
-+#endif
- 
- #include "debug.h"
- #include "firmware.h"
-@@ -424,17 +427,42 @@ struct brcmf_fw {
- static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx)
- {
- 	struct brcmf_fw *fwctx = ctx;
-+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM)
-+	const u8 *bcm47xx_nvram = NULL;
-+	size_t bcm47xx_nvram_len;
-+#endif
-+	const u8 *data = NULL;
-+	size_t data_len;
- 	u32 nvram_length = 0;
- 	void *nvram = NULL;
- 
- 	brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev));
--	if (!fw && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
-+	if (fw) {
-+		data = fw->data;
-+		data_len = fw->size;
-+	}
-+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM)
-+	else {
-+		bcm47xx_nvram = bcm47xx_nvram_get_contents(&bcm47xx_nvram_len);
-+		if (bcm47xx_nvram) {
-+			data = bcm47xx_nvram;
-+			data_len = bcm47xx_nvram_len;
-+			brcmf_err("Found platform NVRAM (%zu B)\n", data_len);
-+		}
-+	}
-+#endif
-+	if (!data && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
- 		goto fail;
- 
--	if (fw) {
--		nvram = brcmf_fw_nvram_strip(fw->data, fw->size, &nvram_length,
-+	if (data) {
-+		nvram = brcmf_fw_nvram_strip(data, data_len, &nvram_length,
- 					     fwctx->domain_nr, fwctx->bus_nr);
--		release_firmware(fw);
-+		if (fw)
-+			release_firmware(fw);
-+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM)
-+		if (bcm47xx_nvram)
-+			bcm47xx_nvram_release_contents(bcm47xx_nvram);
-+#endif
- 		if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
- 			goto fail;
- 	}
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-@@ -19,6 +19,8 @@
- 
- #include <linux/net.h>	/* net_ratelimit() */
- 
-+#include <linux/net.h>
-+
- /* message levels */
- #define BRCMF_TRACE_VAL		0x00000002
- #define BRCMF_INFO_VAL		0x00000004
diff --git a/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch b/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch
index 14f8a001af..95d93ae1f6 100644
--- a/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch
+++ b/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch
@@ -11,9 +11,9 @@ module loads successfully.
 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 ---
 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1226,6 +1226,7 @@ static int __init brcmfmac_module_init(v
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1332,6 +1332,7 @@ static int __init brcmfmac_module_init(v
  #endif
  	if (!schedule_work(&brcmf_driver_work))
  		return -EBUSY;
@@ -21,9 +21,9 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  
  	return 0;
  }
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -422,13 +422,14 @@ struct brcmf_fw {
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+@@ -418,6 +418,7 @@ struct brcmf_fw {
  	u16 bus_nr;
  	void (*done)(struct device *dev, const struct firmware *fw,
  		     void *nvram_image, u32 nvram_len);
@@ -31,16 +31,8 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  };
  
  static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx)
- {
- 	struct brcmf_fw *fwctx = ctx;
- #if IS_ENABLED(CONFIG_BCM47XX_NVRAM)
--	const u8 *bcm47xx_nvram = NULL;
-+	u8 *bcm47xx_nvram = NULL;
- 	size_t bcm47xx_nvram_len;
- #endif
- 	const u8 *data = NULL;
-@@ -468,6 +469,8 @@ static void brcmf_fw_request_nvram_done(
- 	}
+@@ -452,6 +453,8 @@ static void brcmf_fw_request_nvram_done(
+ 		goto fail;
  
  	fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length);
 +	if (fwctx->completion)
@@ -48,7 +40,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  	kfree(fwctx);
  	return;
  
-@@ -475,6 +478,8 @@ fail:
+@@ -459,6 +462,8 @@ fail:
  	brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
  	release_firmware(fwctx->code);
  	device_release_driver(fwctx->dev);
@@ -57,7 +49,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  	kfree(fwctx);
  }
  
-@@ -490,6 +495,8 @@ static void brcmf_fw_request_code_done(c
+@@ -474,6 +479,8 @@ static void brcmf_fw_request_code_done(c
  	/* only requested code so done here */
  	if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) {
  		fwctx->done(fwctx->dev, fw, NULL, 0);
@@ -66,16 +58,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  		kfree(fwctx);
  		return;
  	}
-@@ -504,6 +511,8 @@ static void brcmf_fw_request_code_done(c
- 	/* when nvram is optional call .done() callback here */
- 	if (fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL) {
- 		fwctx->done(fwctx->dev, fw, NULL, 0);
-+		if (fwctx->completion)
-+			complete(fwctx->completion);
- 		kfree(fwctx);
- 		return;
- 	}
-@@ -513,6 +522,8 @@ static void brcmf_fw_request_code_done(c
+@@ -491,6 +498,8 @@ static void brcmf_fw_request_code_done(c
  fail:
  	brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
  	device_release_driver(fwctx->dev);
@@ -84,7 +67,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  	kfree(fwctx);
  }
  
-@@ -524,6 +535,8 @@ int brcmf_fw_get_firmwares_pcie(struct d
+@@ -502,6 +511,8 @@ int brcmf_fw_get_firmwares_pcie(struct d
  				u16 domain_nr, u16 bus_nr)
  {
  	struct brcmf_fw *fwctx;
@@ -93,7 +76,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  
  	brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev));
  	if (!fw_cb || !code)
-@@ -544,9 +557,17 @@ int brcmf_fw_get_firmwares_pcie(struct d
+@@ -522,9 +533,17 @@ int brcmf_fw_get_firmwares_pcie(struct d
  	fwctx->domain_nr = domain_nr;
  	fwctx->bus_nr = bus_nr;
  
diff --git a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
index 32c4a6f9e7..4295b4bd33 100644
--- a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
+++ b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
@@ -8,9 +8,9 @@ Content-Transfer-Encoding: 8bit
 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 ---
 
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -608,9 +608,37 @@ static struct wireless_dev *brcmf_cfg802
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -615,9 +615,37 @@ static struct wireless_dev *brcmf_cfg802
  						     u32 *flags,
  						     struct vif_params *params)
  {
diff --git a/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch b/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch
deleted file mode 100644
index 856dea8de4..0000000000
--- a/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-When running with DT, we no longer have a board file that can set up the
-platform data for wlcore. Allow this data to be passed from DT.
-
-Since some platforms use a gpio-irq, add support for passing either the
-irq number or the gpio number. For the latter case, the driver will
-request the gpio and convert it to the irq number. If an irq is
-specified, it'll be used as is.
-
-[Arik - the pdev_data pointer does not belong to us and is freed when
-the device is released. Dereference to our private data first.]
-
-Signed-off-by: Ido Yariv <ido@wizery.com>
-Signed-off-by: Arik Nemtsov <arik@wizery.com>
----
- drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++---
- include/linux/wl12xx.h                |  3 +-
- 2 files changed, 67 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/ti/wlcore/sdio.c
-+++ b/drivers/net/wireless/ti/wlcore/sdio.c
-@@ -34,6 +34,7 @@
- #include <linux/wl12xx.h>
- #include <linux/pm_runtime.h>
- #include <linux/printk.h>
-+#include <linux/of.h>
- 
- #include "wlcore.h"
- #include "wl12xx_80211.h"
-@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_
- 	.set_block_size = wl1271_sdio_set_block_size,
- };
- 
-+static const struct of_device_id wlcore_of_match[] = {
-+	{
-+		.compatible = "wlcore",
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, wlcore_of_match);
-+
-+static struct wl12xx_platform_data *get_platform_data(struct device *dev)
-+{
-+	struct wl12xx_platform_data *pdata;
-+	struct device_node *np;
-+	u32 gpio;
-+
-+	pdata = wl12xx_get_platform_data();
-+	if (!IS_ERR(pdata))
-+		return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL);
-+
-+	np = of_find_matching_node(NULL, wlcore_of_match);
-+	if (!np) {
-+		dev_err(dev, "No platform data set\n");
-+		return NULL;
-+	}
-+
-+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-+	if (!pdata) {
-+		dev_err(dev, "Can't allocate platform data\n");
-+		return NULL;
-+	}
-+
-+	if (of_property_read_u32(np, "irq", &pdata->irq)) {
-+		if (!of_property_read_u32(np, "gpio", &gpio) &&
-+		    !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) {
-+			pdata->gpio = gpio;
-+			pdata->irq = gpio_to_irq(gpio);
-+		}
-+	}
-+
-+	/* Optional fields */
-+	pdata->use_eeprom = of_property_read_bool(np, "use-eeprom");
-+	of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock);
-+	of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock);
-+	of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks);
-+
-+	return pdata;
-+}
-+
-+static void del_platform_data(struct wl12xx_platform_data *pdata)
-+{
-+	if (pdata->gpio)
-+		gpio_free(pdata->gpio);
-+
-+	kfree(pdata);
-+}
-+
- static int wl1271_probe(struct sdio_func *func,
- 				  const struct sdio_device_id *id)
- {
-@@ -245,10 +301,10 @@ static int wl1271_probe(struct sdio_func
- 	/* Use block mode for transferring over one block size of data */
- 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
- 
--	pdev_data.pdata = wl12xx_get_platform_data();
--	if (IS_ERR(pdev_data.pdata)) {
--		ret = PTR_ERR(pdev_data.pdata);
--		dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
-+	pdev_data.pdata = get_platform_data(&func->dev);
-+	if (!pdev_data.pdata) {
-+		ret = -EINVAL;
-+		dev_err(glue->dev, "missing wlan platform data\n");
- 		goto out_free_glue;
- 	}
- 
-@@ -279,7 +335,7 @@ static int wl1271_probe(struct sdio_func
- 	if (!glue->core) {
- 		dev_err(glue->dev, "can't allocate platform_device");
- 		ret = -ENOMEM;
--		goto out_free_glue;
-+		goto out_free_pdata;
- 	}
- 
- 	glue->core->dev.parent = &func->dev;
-@@ -313,6 +369,9 @@ static int wl1271_probe(struct sdio_func
- out_dev_put:
- 	platform_device_put(glue->core);
- 
-+out_free_pdata:
-+	del_platform_data(pdev_data->pdata);
-+
- out_free_glue:
- 	kfree(glue);
- 
-@@ -323,11 +382,14 @@ out:
- static void wl1271_remove(struct sdio_func *func)
- {
- 	struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
-+	struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data;
-+	struct wl12xx_platform_data *pdata = pdev_data->pdata;
- 
- 	/* Undo decrement done above in wl1271_probe */
- 	pm_runtime_get_noresume(&func->dev);
- 
- 	platform_device_unregister(glue->core);
-+	del_platform_data(pdata);
- 	kfree(glue);
- }
- 
diff --git a/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch b/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch
index e6b2d7be0d..bc9f799520 100644
--- a/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch
+++ b/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
 @@ -211,7 +211,7 @@ endif
  config RT2800SOC
  	tristate "Ralink WiSoC support"
diff --git a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
index 501910fe82..f2e21ea49f 100644
--- a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
+++ b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
@@ -1,5 +1,5 @@
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
 @@ -81,6 +81,7 @@
  #define RF5372				0x5372
  #define RF5390				0x5390
@@ -62,8 +62,8 @@
  /* TX_PWR_CFG_7 */
  #define TX_PWR_CFG_7			0x13d4
  #define TX_PWR_CFG_7_OFDM54_CH0		FIELD32(0x0000000f)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 @@ -61,6 +61,8 @@
  	rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
  #define WAIT_FOR_RFCSR(__dev, __reg) \
@@ -91,7 +91,8 @@
 +			rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM_MT7620, word);
 +			rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE_MT7620, 1);
 +			rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY_MT7620, 1);
-+
+ 
+-		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 +			rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 +		}
 +		break;
@@ -103,8 +104,7 @@
 +			rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
 +			rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
 +			rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
- 
--		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
++
 +			rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 +		}
 +		break;
@@ -210,7 +210,7 @@
  	case RT5592:
  		*txwi_size = TXWI_DESC_SIZE_5WORDS;
  		*rxwi_size = RXWI_DESC_SIZE_6WORDS;
-@@ -3326,6 +3399,312 @@ static void rt2800_config_channel_rf55xx
+@@ -3303,6 +3376,312 @@ static void rt2800_config_channel_rf55xx
  	rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
  }
  
@@ -258,6 +258,7 @@
 +	u32 mac_sys_ctrl, mac_status;
 +	u32 tx_pin = 0x00150F0F;
 +	struct hw_mode_spec *spec = &rt2x00dev->spec;
++	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 +
 +	/* Frequeny plan setting */
 +	/*	
@@ -383,7 +384,6 @@
 +		rfcsr &= (~0x4);
 +	rt2800_rfcsr_write(rt2x00dev, 28, rfcsr);
 +
-+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 +	/*if (bScan == FALSE)*/
 +	if (conf_is_ht40(conf)) {
 +		txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40,
@@ -523,7 +523,7 @@
  static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
  					   const unsigned int word,
  					   const u8 value)
-@@ -3482,7 +3861,7 @@ static void rt2800_config_channel(struct
+@@ -3459,7 +3838,7 @@ static void rt2800_config_channel(struct
  				  struct channel_info *info)
  {
  	u32 reg;
@@ -532,7 +532,7 @@
  	u8 bbp, rfcsr;
  
  	info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
-@@ -3536,6 +3915,9 @@ static void rt2800_config_channel(struct
+@@ -3513,6 +3892,9 @@ static void rt2800_config_channel(struct
  	case RF5592:
  		rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
  		break;
@@ -542,7 +542,7 @@
  	default:
  		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
  	}
-@@ -3638,7 +4020,7 @@ static void rt2800_config_channel(struct
+@@ -3615,7 +3997,7 @@ static void rt2800_config_channel(struct
  		else if (rt2x00_rt(rt2x00dev, RT3593) ||
  			 rt2x00_rt(rt2x00dev, RT3883))
  			rt2800_bbp_write(rt2x00dev, 82, 0x82);
@@ -551,7 +551,7 @@
  			rt2800_bbp_write(rt2x00dev, 82, 0xf2);
  
  		if (rt2x00_rt(rt2x00dev, RT3593) ||
-@@ -3660,7 +4042,7 @@ static void rt2800_config_channel(struct
+@@ -3637,7 +4019,7 @@ static void rt2800_config_channel(struct
  	if (rt2x00_rt(rt2x00dev, RT3572))
  		rt2800_rfcsr_write(rt2x00dev, 8, 0);
  
@@ -560,7 +560,7 @@
  
  	switch (rt2x00dev->default_ant.tx_chain_num) {
  	case 3:
-@@ -3709,6 +4091,7 @@ static void rt2800_config_channel(struct
+@@ -3686,6 +4068,7 @@ static void rt2800_config_channel(struct
  
  	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
  	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
@@ -568,7 +568,7 @@
  
  	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
  
-@@ -4725,6 +5108,14 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4702,6 +5085,14 @@ void rt2800_vco_calibration(struct rt2x0
  		rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
  		rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
  		break;
@@ -583,7 +583,7 @@
  	default:
  		return;
  	}
-@@ -5125,9 +5516,42 @@ static int rt2800_init_registers(struct
+@@ -5102,9 +5493,42 @@ static int rt2800_init_registers(struct
  	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
  		   rt2x00_rt(rt2x00dev, RT5392) ||
  		   rt2x00_rt(rt2x00dev, RT5592)) {
@@ -629,7 +629,7 @@
  	} else if (rt2x00_rt(rt2x00dev, RT5350)) {
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
  	} else {
-@@ -6159,6 +6583,225 @@ static void rt2800_init_bbp_5592(struct
+@@ -6136,6 +6560,225 @@ static void rt2800_init_bbp_5592(struct
  		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
  }
  
@@ -855,7 +855,7 @@
  static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
  {
  	unsigned int i;
-@@ -6201,7 +6844,10 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6178,7 +6821,10 @@ static void rt2800_init_bbp(struct rt2x0
  		return;
  	case RT5390:
  	case RT5392:
@@ -867,7 +867,7 @@
  		break;
  	case RT5592:
  		rt2800_init_bbp_5592(rt2x00dev);
-@@ -7415,6 +8061,295 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -7392,6 +8038,296 @@ static void rt2800_init_rfcsr_5592(struc
  	rt2800_led_open_drain_enable(rt2x00dev);
  }
  
@@ -875,6 +875,8 @@
 +{
 +	u16 freq;
 +	u8 rfvalue;
++	struct hw_mode_spec *spec = &rt2x00dev->spec;
++
 +	/* Initialize RF central register to default value */
 +	rt2800_rfcsr_write(rt2x00dev, 0, 0x02);
 +	rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
@@ -921,7 +923,6 @@
 +	rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
 +	rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
 +
-+	struct hw_mode_spec *spec = &rt2x00dev->spec;
 +	rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
 +	if (spec->clk_is_20mhz)
 +		rt2800_rfcsr_write(rt2x00dev, 13, 0x03);
@@ -1163,7 +1164,7 @@
  static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
  {
  	if (rt2800_is_305x_soc(rt2x00dev)) {
-@@ -7450,7 +8385,10 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7427,7 +8363,10 @@ static void rt2800_init_rfcsr(struct rt2
  		rt2800_init_rfcsr_5350(rt2x00dev);
  		break;
  	case RT5390:
@@ -1175,7 +1176,7 @@
  		break;
  	case RT5392:
  		rt2800_init_rfcsr_5392(rt2x00dev);
-@@ -7882,6 +8820,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7859,6 +8798,7 @@ static int rt2800_init_eeprom(struct rt2
  	case RF5390:
  	case RF5392:
  	case RF5592:
@@ -1183,7 +1184,7 @@
  		break;
  	default:
  		rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
-@@ -8448,6 +9387,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8423,6 +9363,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5372:
  	case RF5390:
  	case RF5392:
@@ -1191,7 +1192,7 @@
  		spec->num_channels = 14;
  		if (spec->clk_is_20mhz)
  			spec->channels = rf_vals_xtal20mhz_3x;
-@@ -8588,6 +9528,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8563,6 +9504,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5372:
  	case RF5390:
  	case RF5392:
diff --git a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch b/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch
deleted file mode 100644
index 4c04d4f0ac..0000000000
--- a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -387,9 +387,14 @@ static int ath10k_download_and_run_otp(s
- 
- 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
- 
--	if (!skip_otp && result != 0) {
--		ath10k_err(ar, "otp calibration failed: %d", result);
--		return -EINVAL;
-+	if (!skip_otp) {
-+		if (result == 2) {
-+			ath10k_warn(ar, "otp stream is empty, using board.bin contents");
-+			return 0;
-+		} else if (result != 0) {
-+			ath10k_err(ar, "otp calibration failed: %d", result);
-+			return -EINVAL;
-+		}
- 	}
- 
- 	return 0;
diff --git a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
index eed3814eeb..8c6d720a73 100644
--- a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
+++ b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
@@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
 
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -1323,6 +1323,16 @@ int ath10k_core_register(struct ath10k *
+@@ -1914,6 +1914,16 @@ int ath10k_core_register(struct ath10k *
  	ar->chip_id = chip_id;
  	queue_work(ar->workqueue, &ar->register_work);
  
diff --git a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
index 8003f86468..281b4475ad 100644
--- a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
+++ b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -5416,6 +5416,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
+@@ -7141,6 +7141,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
  	return arvif_iter.arvif;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -5590,6 +5605,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -7357,6 +7372,12 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->wiphy->cipher_suites = cipher_suites;
  	ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
  
diff --git a/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
new file mode 100644
index 0000000000..357faee4bf
--- /dev/null
+++ b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/wireless/marvell/mwl8k.c
++++ b/drivers/net/wireless/marvell/mwl8k.c
+@@ -6264,6 +6264,8 @@ static int mwl8k_probe(struct pci_dev *p
+ 
+ 	priv->running_bsses = 0;
+ 
++	wait_for_completion(&priv->firmware_loading_complete);
++
+ 	return rc;
+ 
+ err_stop_firmware:
+@@ -6297,8 +6299,6 @@ static void mwl8k_remove(struct pci_dev
+ 		return;
+ 	priv = hw->priv;
+ 
+-	wait_for_completion(&priv->firmware_loading_complete);
+-
+ 	if (priv->fw_state == FW_STATE_ERROR) {
+ 		mwl8k_hw_reset(priv);
+ 		goto unmap;
diff --git a/package/kernel/mt76/Makefile b/package/kernel/mt76/Makefile
index 5ede95a44e..0f2a501cf3 100644
--- a/package/kernel/mt76/Makefile
+++ b/package/kernel/mt76/Makefile
@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mt76
-PKG_VERSION:=2015-10-12
+PKG_VERSION:=2016-02-28
 PKG_RELEASE=1
 
 PKG_LICENSE:=GPLv2
@@ -10,7 +10,7 @@ PKG_LICENSE_FILES:=
 PKG_SOURCE_URL:=https://github.com/openwrt/mt76
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=2f31d1e329dc43074a05782624195860c45b099a
+PKG_SOURCE_VERSION:=675868d4e84f0f4be2449c40902b229b79ecf926
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
@@ -23,8 +23,10 @@ define KernelPackage/mt76
   SUBMENU:=Wireless Drivers
   TITLE:=MediaTek MT76x2 wireless driver
   DEPENDS:=+kmod-mac80211 +@DRIVER_11N_SUPPORT @PCI_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/mt76pci.ko
-  AUTOLOAD:=$(call AutoLoad,50,mac80211 mt76pci)
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt76.ko \
+	$(PKG_BUILD_DIR)/mt76x2e.ko
+  AUTOLOAD:=$(call AutoLoad,50,mac80211 mt76 mt76x2e)
 endef
 
 NOSTDINC_FLAGS = \
diff --git a/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch b/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch
deleted file mode 100644
index e94574dc43..0000000000
--- a/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/init.c
-+++ b/init.c
-@@ -16,6 +16,9 @@
- #include "eeprom.h"
- #include "mcu.h"
- 
-+#define ieee80211_hw_set(hw, flag) \
-+	do { (hw)->flags |= IEEE80211_HW_##flag; } while(0)
-+
- static bool
- mt76_wait_for_mac(struct mt76_dev *dev)
- {
diff --git a/package/kernel/mt76/patches/002-disable_fast_xmit.patch b/package/kernel/mt76/patches/002-disable_fast_xmit.patch
deleted file mode 100644
index f7a011b2e1..0000000000
--- a/package/kernel/mt76/patches/002-disable_fast_xmit.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/init.c
-+++ b/init.c
-@@ -816,7 +816,6 @@ int mt76_register_device(struct mt76_dev
- 	ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
- 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
- 	ieee80211_hw_set(hw, SUPPORTS_RC_TABLE);
--	ieee80211_hw_set(hw, SUPPORT_FAST_XMIT);
- 
- 	hw->sta_data_size = sizeof(struct mt76_sta);
- 	hw->vif_data_size = sizeof(struct mt76_vif);
diff --git a/package/kernel/mwlwifi/patches/100-drop_old_api.patch b/package/kernel/mwlwifi/patches/100-drop_old_api.patch
new file mode 100644
index 0000000000..d2e149e9a2
--- /dev/null
+++ b/package/kernel/mwlwifi/patches/100-drop_old_api.patch
@@ -0,0 +1,92 @@
+--- a/main.c
++++ b/main.c
+@@ -418,11 +418,7 @@ static void mwl_set_ht_caps(struct mwl_p
+ 	band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+ 	band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+ 
+-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0)
+-	hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+-#else
+ 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
+-#endif
+ 	band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ 	band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_4;
+ 
+@@ -524,29 +520,16 @@ static int mwl_wl_init(struct mwl_priv *
+ 	hw->queues = SYSADPT_TX_WMM_QUEUES;
+ 
+ 	/* Set rssi values to dBm */
+-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0)
+-	hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_HAS_RATE_CONTROL;
+-#else
+ 	ieee80211_hw_set(hw, SIGNAL_DBM);
+ 	ieee80211_hw_set(hw, HAS_RATE_CONTROL);
+-#endif
+ 
+ 	/* Ask mac80211 not to trigger PS mode
+ 	 * based on PM bit of incoming frames.
+ 	 */
+-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0)
+-	hw->flags |= IEEE80211_HW_AP_LINK_PS;
+-#else
+ 	ieee80211_hw_set(hw, AP_LINK_PS);
+-#endif
+ 
+-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0)
+-	hw->flags |= IEEE80211_HW_SUPPORTS_PER_STA_GTK |
+-		     IEEE80211_HW_MFP_CAPABLE;
+-#else
+ 	ieee80211_hw_set(hw, SUPPORTS_PER_STA_GTK);
+ 	ieee80211_hw_set(hw, MFP_CAPABLE);
+-#endif
+ 
+ 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ 
+--- a/dev.h
++++ b/dev.h
+@@ -484,10 +484,6 @@ static inline struct mwl_sta *mwl_dev_ge
+ 	return (struct mwl_sta *)&sta->drv_priv;
+ }
+ 
+-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0)
+-#define ether_addr_copy(dst, src) memcpy(dst, src, ETH_ALEN)
+-#endif
+-
+ /* Defined in mac80211.c. */
+ extern const struct ieee80211_ops mwl_mac80211_ops;
+ 
+--- a/mac80211.c
++++ b/mac80211.c
+@@ -572,19 +572,11 @@ static int mwl_mac80211_get_survey(struc
+ 	return 0;
+ }
+ 
+-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+-static int mwl_mac80211_ampdu_action(struct ieee80211_hw *hw,
+-				     struct ieee80211_vif *vif,
+-				     enum ieee80211_ampdu_mlme_action action,
+-				     struct ieee80211_sta *sta,
+-				     u16 tid, u16 *ssn, u8 buf_size)
+-#else
+ static int mwl_mac80211_ampdu_action(struct ieee80211_hw *hw,
+ 				     struct ieee80211_vif *vif,
+ 				     enum ieee80211_ampdu_mlme_action action,
+ 				     struct ieee80211_sta *sta,
+ 				     u16 tid, u16 *ssn, u8 buf_size, bool amsdu)
+-#endif
+ {
+ 	int rc = 0;
+ 	struct mwl_priv *priv = hw->priv;
+--- a/rx.c
++++ b/rx.c
+@@ -232,10 +232,8 @@ static inline void mwl_rx_prepare_status
+ 		status->flag |= RX_FLAG_VHT;
+ 		if (bw == RX_RATE_INFO_HT40)
+ 			status->flag |= RX_FLAG_40MHZ;
+-#if LINUX_VERSION_CODE > KERNEL_VERSION(3, 18, 0)
+ 		if (bw == RX_RATE_INFO_HT80)
+ 			status->vht_flag |= RX_VHT_FLAG_80MHZ;
+-#endif
+ 		if (gi == RX_RATE_INFO_SHORT_INTERVAL)
+ 			status->flag |= RX_FLAG_SHORT_GI;
+ 		status->vht_nss = (nss + 1);
diff --git a/package/kernel/mwlwifi/patches/110-api_sync.patch b/package/kernel/mwlwifi/patches/110-api_sync.patch
new file mode 100644
index 0000000000..ed3e06a1c1
--- /dev/null
+++ b/package/kernel/mwlwifi/patches/110-api_sync.patch
@@ -0,0 +1,19 @@
+--- a/mac80211.c
++++ b/mac80211.c
+@@ -597,10 +597,13 @@ static int mwl_mac80211_get_survey(struc
+ 
+ static int mwl_mac80211_ampdu_action(struct ieee80211_hw *hw,
+ 				     struct ieee80211_vif *vif,
+-				     enum ieee80211_ampdu_mlme_action action,
+-				     struct ieee80211_sta *sta,
+-				     u16 tid, u16 *ssn, u8 buf_size, bool amsdu)
++				     struct ieee80211_ampdu_params *params)
+ {
++	enum ieee80211_ampdu_mlme_action action = params->action;
++	struct ieee80211_sta *sta = params->sta;
++	u16 tid = params->tid;
++	u16 *ssn = &params->ssn;
++	u8 buf_size = params->buf_size;
+ 	int rc = 0;
+ 	struct mwl_priv *priv = hw->priv;
+ 	struct mwl_ampdu_stream *stream;
diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h
index 9fa70167e6..30ce2165cb 100644
--- a/target/linux/generic/files/include/linux/ath9k_platform.h
+++ b/target/linux/generic/files/include/linux/ath9k_platform.h
@@ -36,6 +36,7 @@ struct ath9k_platform_data {
 	bool tx_gain_buffalo;
 	bool disable_2ghz;
 	bool disable_5ghz;
+	bool led_active_high;
 
 	int (*get_mac_revision)(void);
 	int (*external_reset)(void);
diff --git a/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch b/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch
index 8ec73d92ce..a74d9eead9 100644
--- a/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch
+++ b/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch
@@ -1,6 +1,40 @@
 --- a/drivers/bcma/driver_chipcommon.c
 +++ b/drivers/bcma/driver_chipcommon.c
-@@ -190,6 +190,7 @@ u32 bcma_chipco_watchdog_timer_set(struc
+@@ -15,6 +15,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+ 
++static void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
++
+ static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+ 					 u32 mask, u32 value)
+ {
+@@ -115,6 +117,8 @@ int bcma_chipco_watchdog_register(struct
+ 
+ void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
+ {
++	struct bcma_bus *bus = cc->core->bus;
++
+ 	if (cc->early_setup_done)
+ 		return;
+ 
+@@ -129,6 +133,9 @@ void bcma_core_chipcommon_early_init(str
+ 	if (cc->capabilities & BCMA_CC_CAP_PMU)
+ 		bcma_pmu_early_init(cc);
+ 
++	if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC)
++		bcma_chipco_serial_init(cc);
++
+ 	cc->early_setup_done = true;
+ }
+ 
+@@ -185,11 +192,12 @@ u32 bcma_chipco_watchdog_timer_set(struc
+ 			ticks = 2;
+ 		else if (ticks > maxt)
+ 			ticks = maxt;
+-		bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
++		bcma_pmu_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
+ 	} else {
  		struct bcma_bus *bus = cc->core->bus;
  
  		if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4707 &&
@@ -8,6 +42,232 @@
  		    bus->chipinfo.id != BCMA_CHIP_ID_BCM53018)
  			bcma_core_set_clockmode(cc->core,
  						ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC);
+@@ -314,9 +322,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcm
+ 	return res;
+ }
+ 
+-#ifdef CONFIG_BCMA_DRIVER_MIPS
+-void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
++static void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+ {
++#if IS_BUILTIN(CONFIG_BCM47XX)
+ 	unsigned int irq;
+ 	u32 baud_base;
+ 	u32 i;
+@@ -358,5 +366,5 @@ void bcma_chipco_serial_init(struct bcma
+ 		ports[i].baud_base = baud_base;
+ 		ports[i].reg_shift = 0;
+ 	}
++#endif /* CONFIG_BCM47XX */
+ }
+-#endif /* CONFIG_BCMA_DRIVER_MIPS */
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -15,44 +15,44 @@
+ 
+ u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+ {
+-	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+-	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+-	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
++	bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
++	return bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
+ 
+ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+ {
+-	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+-	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+-	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
++	bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value);
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);
+ 
+ void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+ 			     u32 set)
+ {
+-	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+-	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+-	bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
++	bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
++	bcma_pmu_maskset32(cc, BCMA_CC_PMU_PLLCTL_DATA, mask, set);
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);
+ 
+ void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+ 				 u32 offset, u32 mask, u32 set)
+ {
+-	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
+-	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+-	bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_CHIPCTL_ADDR, offset);
++	bcma_pmu_read32(cc, BCMA_CC_PMU_CHIPCTL_ADDR);
++	bcma_pmu_maskset32(cc, BCMA_CC_PMU_CHIPCTL_DATA, mask, set);
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);
+ 
+ void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+ 				u32 set)
+ {
+-	bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
+-	bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
+-	bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_REGCTL_ADDR, offset);
++	bcma_pmu_read32(cc, BCMA_CC_PMU_REGCTL_ADDR);
++	bcma_pmu_maskset32(cc, BCMA_CC_PMU_REGCTL_DATA, mask, set);
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+ 
+@@ -60,18 +60,18 @@ static u32 bcma_pmu_xtalfreq(struct bcma
+ {
+ 	u32 ilp_ctl, alp_hz;
+ 
+-	if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++	if (!(bcma_pmu_read32(cc, BCMA_CC_PMU_STAT) &
+ 	      BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
+ 		return 0;
+ 
+-	bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
+-			BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++	bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++			 BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
+ 	usleep_range(1000, 2000);
+ 
+-	ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++	ilp_ctl = bcma_pmu_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
+ 	ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
+ 
+-	bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
+ 
+ 	alp_hz = ilp_ctl * 32768 / 4;
+ 	return (alp_hz + 50000) / 100000 * 100;
+@@ -127,8 +127,8 @@ static void bcma_pmu2_pll_init0(struct b
+ 		mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
+ 			      BCMA_RES_4314_MACPHY_CLK_AVAIL);
+ 
+-		bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
+-		bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++		bcma_pmu_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++		bcma_pmu_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
+ 		bcma_wait_value(cc->core, BCMA_CLKCTLST,
+ 				BCMA_CLKCTLST_HAVEHT, 0, 20000);
+ 		break;
+@@ -140,7 +140,7 @@ static void bcma_pmu2_pll_init0(struct b
+ 
+ 	/* Flush */
+ 	if (cc->pmu.rev >= 2)
+-		bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++		bcma_pmu_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
+ 
+ 	/* TODO: Do we need to update OTP? */
+ }
+@@ -195,9 +195,9 @@ static void bcma_pmu_resources_init(stru
+ 
+ 	/* Set the resource masks. */
+ 	if (min_msk)
+-		bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
++		bcma_pmu_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+ 	if (max_msk)
+-		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
++		bcma_pmu_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+ 
+ 	/*
+ 	 * Add some delay; allow resources to come up and settle.
+@@ -269,23 +269,33 @@ static void bcma_pmu_workarounds(struct
+ 
+ void bcma_pmu_early_init(struct bcma_drv_cc *cc)
+ {
++	struct bcma_bus *bus = cc->core->bus;
+ 	u32 pmucap;
+ 
+-	pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
++	if (cc->core->id.rev >= 35 &&
++	    cc->capabilities_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) {
++		cc->pmu.core = bcma_find_core(bus, BCMA_CORE_PMU);
++		if (!cc->pmu.core)
++			bcma_warn(bus, "Couldn't find expected PMU core");
++	}
++	if (!cc->pmu.core)
++		cc->pmu.core = cc->core;
++
++	pmucap = bcma_pmu_read32(cc, BCMA_CC_PMU_CAP);
+ 	cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+ 
+-	bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
+-		   cc->pmu.rev, pmucap);
++	bcma_debug(bus, "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
++		   pmucap);
+ }
+ 
+ void bcma_pmu_init(struct bcma_drv_cc *cc)
+ {
+ 	if (cc->pmu.rev == 1)
+-		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+-			      ~BCMA_CC_PMU_CTL_NOILPONW);
++		bcma_pmu_mask32(cc, BCMA_CC_PMU_CTL,
++				~BCMA_CC_PMU_CTL_NOILPONW);
+ 	else
+-		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+-			     BCMA_CC_PMU_CTL_NOILPONW);
++		bcma_pmu_set32(cc, BCMA_CC_PMU_CTL,
++			       BCMA_CC_PMU_CTL_NOILPONW);
+ 
+ 	bcma_pmu_pll_init(cc);
+ 	bcma_pmu_resources_init(cc);
+@@ -472,8 +482,8 @@ u32 bcma_pmu_get_cpu_clock(struct bcma_d
+ static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
+ 					 u32 value)
+ {
+-	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+-	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value);
+ }
+ 
+ void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
+@@ -497,20 +507,20 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		       bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;
+ 
+ 		/* RMW only the P1 divider */
+-		bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
++		bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR,
+ 				BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
+-		tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++		tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
+ 		tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
+ 		tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
+-		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
++		bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp);
+ 
+ 		/* RMW only the int feedback divider */
+-		bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
++		bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR,
+ 				BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
+-		tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++		tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
+ 		tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
+ 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+-		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
++		bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp);
+ 
+ 		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+@@ -646,7 +656,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		break;
+ 	}
+ 
+-	tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
+-	bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
++	tmp |= bcma_pmu_read32(cc, BCMA_CC_PMU_CTL);
++	bcma_pmu_write32(cc, BCMA_CC_PMU_CTL, tmp);
+ }
+ EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
 --- a/drivers/bcma/driver_chipcommon_sflash.c
 +++ b/drivers/bcma/driver_chipcommon_sflash.c
 @@ -38,6 +38,7 @@ static const struct bcma_sflash_tbl_e bc
@@ -18,27 +278,6 @@
  	{ NULL },
  };
  
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -229,6 +229,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- 	case BCMA_CHIP_ID_BCM4707:
- 	case BCMA_CHIP_ID_BCM5357:
- 	case BCMA_CHIP_ID_BCM53572:
-+	case BCMA_CHIP_ID_BCM47094:
- 		chip->ngpio	= 32;
- 		break;
- 	default:
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -294,7 +294,7 @@ static const struct pci_device_id bcma_p
- 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
--	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
-+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
 --- a/drivers/bcma/scan.c
 +++ b/drivers/bcma/scan.c
 @@ -98,6 +98,9 @@ static const struct bcma_device_id_name
@@ -51,6 +290,32 @@
  	{ BCMA_CORE_DEFAULT, "Default" },
  };
  
+@@ -315,6 +318,8 @@ static int bcma_get_next_core(struct bcm
+ 		switch (core->id.id) {
+ 		case BCMA_CORE_4706_MAC_GBIT_COMMON:
+ 		case BCMA_CORE_NS_CHIPCOMMON_B:
++		case BCMA_CORE_PMU:
++		case BCMA_CORE_GCI:
+ 		/* Not used yet: case BCMA_CORE_OOB_ROUTER: */
+ 			break;
+ 		default:
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str
+ 	case B43_BUS_BCMA:
+ 		bcma_cc = &dev->dev->bdev->bus->drv_cc;
+ 
+-		bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0);
+-		bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
+-		bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4);
+-		bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
++		bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0);
++		bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
++		bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4);
++		bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
+ 		break;
+ #endif
+ #ifdef CONFIG_B43_SSB
 --- a/include/linux/bcma/bcma.h
 +++ b/include/linux/bcma/bcma.h
 @@ -151,6 +151,8 @@ struct bcma_host_ops {
@@ -70,3 +335,110 @@
  #define BCMA_CHIP_ID_BCM53018	53018
  
  /* Board types (on PCI usually equals to the subsystem dev id) */
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -217,6 +217,11 @@
+ #define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
+ #define	 BCMA_CC_CLKDIV_UART		0x000000FF
+ #define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
++#define  BCMA_CC_CAP_EXT_SECI_PRESENT	0x00000001
++#define  BCMA_CC_CAP_EXT_GSIO_PRESENT	0x00000002
++#define  BCMA_CC_CAP_EXT_GCI_PRESENT	0x00000004
++#define  BCMA_CC_CAP_EXT_SECI_PUART_PRESENT		0x00000008    /* UART present */
++#define  BCMA_CC_CAP_EXT_AOB_PRESENT	0x00000040
+ #define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+ #define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+ #define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+@@ -351,12 +356,12 @@
+ #define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+ #define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
+ #define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
+-#define BCMA_CC_CHIPCTL_ADDR		0x0650
+-#define BCMA_CC_CHIPCTL_DATA		0x0654
+-#define BCMA_CC_REGCTL_ADDR		0x0658
+-#define BCMA_CC_REGCTL_DATA		0x065C
+-#define BCMA_CC_PLLCTL_ADDR		0x0660
+-#define BCMA_CC_PLLCTL_DATA		0x0664
++#define BCMA_CC_PMU_CHIPCTL_ADDR	0x0650
++#define BCMA_CC_PMU_CHIPCTL_DATA	0x0654
++#define BCMA_CC_PMU_REGCTL_ADDR		0x0658
++#define BCMA_CC_PMU_REGCTL_DATA		0x065C
++#define BCMA_CC_PMU_PLLCTL_ADDR		0x0660
++#define BCMA_CC_PMU_PLLCTL_DATA		0x0664
+ #define BCMA_CC_PMU_STRAPOPT		0x0668 /* (corerev >= 28) */
+ #define BCMA_CC_PMU_XTAL_FREQ		0x066C /* (pmurev >= 10) */
+ #define  BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK	0x00001FFF
+@@ -566,6 +571,7 @@
+  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+  */
+ struct bcma_chipcommon_pmu {
++	struct bcma_device *core;	/* Can be separated core or just ChipCommon one */
+ 	u8 rev;			/* PMU revision */
+ 	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+ };
+@@ -663,6 +669,19 @@ struct bcma_drv_cc_b {
+ #define bcma_cc_maskset32(cc, offset, mask, set) \
+ 	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+ 
++/* PMU registers access */
++#define bcma_pmu_read32(cc, offset) \
++	bcma_read32((cc)->pmu.core, offset)
++#define bcma_pmu_write32(cc, offset, val) \
++	bcma_write32((cc)->pmu.core, offset, val)
++
++#define bcma_pmu_mask32(cc, offset, mask) \
++	bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) & (mask))
++#define bcma_pmu_set32(cc, offset, set) \
++	bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) | (set))
++#define bcma_pmu_maskset32(cc, offset, mask, set) \
++	bcma_pmu_write32(cc, offset, (bcma_pmu_read32(cc, offset) & (mask)) | (set))
++
+ extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+ 
+ extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -47,7 +47,6 @@ void bcma_core_chipcommon_early_init(str
+ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+ void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+-void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+ extern struct platform_device bcma_pflash_dev;
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
+ 
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -229,6 +229,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+ 	case BCMA_CHIP_ID_BCM4707:
+ 	case BCMA_CHIP_ID_BCM5357:
+ 	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM47094:
+ 		chip->ngpio	= 32;
+ 		break;
+ 	default:
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -328,12 +328,9 @@ static void bcma_core_mips_flash_detect(
+ 
+ void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+ {
+-	struct bcma_bus *bus = mcore->core->bus;
+-
+ 	if (mcore->early_setup_done)
+ 		return;
+ 
+-	bcma_chipco_serial_init(&bus->drv_cc);
+ 	bcma_core_mips_flash_detect(mcore);
+ 
+ 	mcore->early_setup_done = true;
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -294,7 +294,7 @@ static const struct pci_device_id bcma_p
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
+-	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
++	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
-- 
2.30.2