From 747e8f8bff56955374521fa4d488e702d4b0c04f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 25 Jul 2005 12:33:22 -0700 Subject: [PATCH] [TG3]: add 5780 fiber support Add 5780S support by adding a new tg3_setup_fiber_mii_phy() function and a timer function for parallel link detection. 5780S uses standard MII registers for 1000BaseX and runs in GMII mode as opposed to TBI mode on older serdes chips. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 256 ++++++++++++++++++++++++++++++++++++++++++++-- drivers/net/tg3.h | 4 + 2 files changed, 253 insertions(+), 7 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 04d8b18e2912..ffc854c4ab01 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1100,7 +1100,7 @@ static int tg3_set_power_state(struct tg3 *tp, int state) tp->link_config.orig_autoneg = tp->link_config.autoneg; } - if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) { + if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) { tp->link_config.speed = SPEED_10; tp->link_config.duplex = DUPLEX_HALF; tp->link_config.autoneg = AUTONEG_ENABLE; @@ -1247,6 +1247,25 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv u32 old_tx_mode = tp->tx_mode; if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) { + + /* Convert 1000BaseX flow control bits to 1000BaseT + * bits before resolving flow control. + */ + if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) { + local_adv &= ~(ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + remote_adv &= ~(LPA_PAUSE_CAP | LPA_PAUSE_ASYM); + + if (local_adv & ADVERTISE_1000XPAUSE) + local_adv |= ADVERTISE_PAUSE_CAP; + if (local_adv & ADVERTISE_1000XPSE_ASYM) + local_adv |= ADVERTISE_PAUSE_ASYM; + if (remote_adv & LPA_1000XPAUSE) + remote_adv |= LPA_PAUSE_CAP; + if (remote_adv & LPA_1000XPAUSE_ASYM) + remote_adv |= LPA_PAUSE_ASYM; + } + if (local_adv & ADVERTISE_PAUSE_CAP) { if (local_adv & ADVERTISE_PAUSE_ASYM) { if (remote_adv & LPA_PAUSE_CAP) @@ -2507,12 +2526,226 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset) return 0; } +static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) +{ + int current_link_up, err = 0; + u32 bmsr, bmcr; + u16 current_speed; + u8 current_duplex; + + tp->mac_mode |= MAC_MODE_PORT_MODE_GMII; + tw32_f(MAC_MODE, tp->mac_mode); + udelay(40); + + tw32(MAC_EVENT, 0); + + tw32_f(MAC_STATUS, + (MAC_STATUS_SYNC_CHANGED | + MAC_STATUS_CFG_CHANGED | + MAC_STATUS_MI_COMPLETION | + MAC_STATUS_LNKSTATE_CHANGED)); + udelay(40); + + if (force_reset) + tg3_phy_reset(tp); + + current_link_up = 0; + current_speed = SPEED_INVALID; + current_duplex = DUPLEX_INVALID; + + err |= tg3_readphy(tp, MII_BMSR, &bmsr); + err |= tg3_readphy(tp, MII_BMSR, &bmsr); + + err |= tg3_readphy(tp, MII_BMCR, &bmcr); + + if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset && + (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) { + /* do nothing, just check for link up at the end */ + } else if (tp->link_config.autoneg == AUTONEG_ENABLE) { + u32 adv, new_adv; + + err |= tg3_readphy(tp, MII_ADVERTISE, &adv); + new_adv = adv & ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF | + ADVERTISE_1000XPAUSE | + ADVERTISE_1000XPSE_ASYM | + ADVERTISE_SLCT); + + /* Always advertise symmetric PAUSE just like copper */ + new_adv |= ADVERTISE_1000XPAUSE; + + if (tp->link_config.advertising & ADVERTISED_1000baseT_Half) + new_adv |= ADVERTISE_1000XHALF; + if (tp->link_config.advertising & ADVERTISED_1000baseT_Full) + new_adv |= ADVERTISE_1000XFULL; + + if ((new_adv != adv) || !(bmcr & BMCR_ANENABLE)) { + tg3_writephy(tp, MII_ADVERTISE, new_adv); + bmcr |= BMCR_ANENABLE | BMCR_ANRESTART; + tg3_writephy(tp, MII_BMCR, bmcr); + + tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED); + tp->tg3_flags2 |= TG3_FLG2_PHY_JUST_INITTED; + tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; + + return err; + } + } else { + u32 new_bmcr; + + bmcr &= ~BMCR_SPEED1000; + new_bmcr = bmcr & ~(BMCR_ANENABLE | BMCR_FULLDPLX); + + if (tp->link_config.duplex == DUPLEX_FULL) + new_bmcr |= BMCR_FULLDPLX; + + if (new_bmcr != bmcr) { + /* BMCR_SPEED1000 is a reserved bit that needs + * to be set on write. + */ + new_bmcr |= BMCR_SPEED1000; + + /* Force a linkdown */ + if (netif_carrier_ok(tp->dev)) { + u32 adv; + + err |= tg3_readphy(tp, MII_ADVERTISE, &adv); + adv &= ~(ADVERTISE_1000XFULL | + ADVERTISE_1000XHALF | + ADVERTISE_SLCT); + tg3_writephy(tp, MII_ADVERTISE, adv); + tg3_writephy(tp, MII_BMCR, bmcr | + BMCR_ANRESTART | + BMCR_ANENABLE); + udelay(10); + netif_carrier_off(tp->dev); + } + tg3_writephy(tp, MII_BMCR, new_bmcr); + bmcr = new_bmcr; + err |= tg3_readphy(tp, MII_BMSR, &bmsr); + err |= tg3_readphy(tp, MII_BMSR, &bmsr); + tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; + } + } + + if (bmsr & BMSR_LSTATUS) { + current_speed = SPEED_1000; + current_link_up = 1; + if (bmcr & BMCR_FULLDPLX) + current_duplex = DUPLEX_FULL; + else + current_duplex = DUPLEX_HALF; + + if (bmcr & BMCR_ANENABLE) { + u32 local_adv, remote_adv, common; + + err |= tg3_readphy(tp, MII_ADVERTISE, &local_adv); + err |= tg3_readphy(tp, MII_LPA, &remote_adv); + common = local_adv & remote_adv; + if (common & (ADVERTISE_1000XHALF | + ADVERTISE_1000XFULL)) { + if (common & ADVERTISE_1000XFULL) + current_duplex = DUPLEX_FULL; + else + current_duplex = DUPLEX_HALF; + + tg3_setup_flow_control(tp, local_adv, + remote_adv); + } + else + current_link_up = 0; + } + } + + tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX; + if (tp->link_config.active_duplex == DUPLEX_HALF) + tp->mac_mode |= MAC_MODE_HALF_DUPLEX; + + tw32_f(MAC_MODE, tp->mac_mode); + udelay(40); + + tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED); + + tp->link_config.active_speed = current_speed; + tp->link_config.active_duplex = current_duplex; + + if (current_link_up != netif_carrier_ok(tp->dev)) { + if (current_link_up) + netif_carrier_on(tp->dev); + else { + netif_carrier_off(tp->dev); + tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; + } + tg3_link_report(tp); + } + return err; +} + +static void tg3_serdes_parallel_detect(struct tg3 *tp) +{ + if (tp->tg3_flags2 & TG3_FLG2_PHY_JUST_INITTED) { + /* Give autoneg time to complete. */ + tp->tg3_flags2 &= ~TG3_FLG2_PHY_JUST_INITTED; + return; + } + if (!netif_carrier_ok(tp->dev) && + (tp->link_config.autoneg == AUTONEG_ENABLE)) { + u32 bmcr; + + tg3_readphy(tp, MII_BMCR, &bmcr); + if (bmcr & BMCR_ANENABLE) { + u32 phy1, phy2; + + /* Select shadow register 0x1f */ + tg3_writephy(tp, 0x1c, 0x7c00); + tg3_readphy(tp, 0x1c, &phy1); + + /* Select expansion interrupt status register */ + tg3_writephy(tp, 0x17, 0x0f01); + tg3_readphy(tp, 0x15, &phy2); + tg3_readphy(tp, 0x15, &phy2); + + if ((phy1 & 0x10) && !(phy2 & 0x20)) { + /* We have signal detect and not receiving + * config code words, link is up by parallel + * detection. + */ + + bmcr &= ~BMCR_ANENABLE; + bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX; + tg3_writephy(tp, MII_BMCR, bmcr); + tp->tg3_flags2 |= TG3_FLG2_PARALLEL_DETECT; + } + } + } + else if (netif_carrier_ok(tp->dev) && + (tp->link_config.autoneg == AUTONEG_ENABLE) && + (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) { + u32 phy2; + + /* Select expansion interrupt status register */ + tg3_writephy(tp, 0x17, 0x0f01); + tg3_readphy(tp, 0x15, &phy2); + if (phy2 & 0x20) { + u32 bmcr; + + /* Config code words received, turn on autoneg. */ + tg3_readphy(tp, MII_BMCR, &bmcr); + tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANENABLE); + + tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; + + } + } +} + static int tg3_setup_phy(struct tg3 *tp, int force_reset) { int err; if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) { err = tg3_setup_fiber_phy(tp, force_reset); + } else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) { + err = tg3_setup_fiber_mii_phy(tp, force_reset); } else { err = tg3_setup_copper_phy(tp, force_reset); } @@ -4127,6 +4360,9 @@ static int tg3_chip_reset(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) { tp->mac_mode = MAC_MODE_PORT_MODE_TBI; tw32_f(MAC_MODE, tp->mac_mode); + } else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) { + tp->mac_mode = MAC_MODE_PORT_MODE_GMII; + tw32_f(MAC_MODE, tp->mac_mode); } else tw32_f(MAC_MODE, 0); udelay(40); @@ -5911,7 +6147,8 @@ static void tg3_timer(unsigned long __opaque) udelay(40); tg3_setup_phy(tp, 0); } - } + } else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) + tg3_serdes_parallel_detect(tp); tp->timer_counter = tp->timer_multiplier; } @@ -8615,8 +8852,12 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) eeprom_phy_id = 0; tp->phy_id = eeprom_phy_id; - if (eeprom_phy_serdes) - tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES; + if (eeprom_phy_serdes) { + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + tp->tg3_flags2 |= TG3_FLG2_MII_SERDES; + else + tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES; + } if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK | @@ -8751,7 +8992,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp) } } - if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) && + if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) && !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { u32 bmsr, adv_reg, tg3_ctrl; @@ -8804,7 +9045,7 @@ skip_phy_reset: err = tg3_init_5401phy_dsp(tp); } - if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) tp->link_config.advertising = (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | @@ -9153,7 +9394,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) || ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) && (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) && - (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1))) + (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) || + (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED; if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5703_AX || diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 0a277c1e75d1..5c4433c147fa 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2161,6 +2161,10 @@ struct tg3 { #define TG3_FLG2_PROTECTED_NVRAM 0x00100000 #define TG3_FLG2_USING_MSI 0x00200000 #define TG3_FLG2_JUMBO_CAPABLE 0x00400000 +#define TG3_FLG2_MII_SERDES 0x00800000 +#define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \ + TG3_FLG2_MII_SERDES) +#define TG3_FLG2_PARALLEL_DETECT 0x01000000 u32 split_mode_max_reqs; #define SPLIT_MODE_5704_MAX_REQ 3 -- 2.30.2