From 74212e7be3adfb427ae66679623f12ef5ae56693 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 24 Oct 2023 07:40:37 +0200 Subject: [PATCH] bcm53xx: backport DT changes queued for v6.7 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Among other changes this commit makes Linux use correct switch ports again. Fixes: fff279f4a712 ("bcm53xx: backport DT changes from v6.5") Signed-off-by: Rafał Miłecki (cherry picked from commit a67af19bc84e98588c307af9b08686bde9dd38d5) --- ...CM5301X-Set-MACs-for-D-Link-DIR-885L.patch | 56 +++ ...1X-Set-MAC-address-for-Asus-RT-AC87U.patch | 44 ++ ...-Relicense-Felix-s-code-to-the-GPL-2.patch | 57 +++ ...-Relicense-Vivek-s-code-to-the-GPL-2.patch | 104 +++++ ...-Explicitly-disable-unused-switch-CP.patch | 377 ++++++++++++++++++ ...-Set-fixed-link-for-extra-Netgear-R8.patch | 47 +++ ...-Specify-switch-ports-for-remaining-.patch | 2 +- 7 files changed, 686 insertions(+), 1 deletion(-) create mode 100644 target/linux/bcm53xx/patches-5.4/045-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch create mode 100644 target/linux/bcm53xx/patches-5.4/045-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch create mode 100644 target/linux/bcm53xx/patches-5.4/045-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch create mode 100644 target/linux/bcm53xx/patches-5.4/045-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch create mode 100644 target/linux/bcm53xx/patches-5.4/045-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch create mode 100644 target/linux/bcm53xx/patches-5.4/045-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch diff --git a/target/linux/bcm53xx/patches-5.4/045-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-5.4/045-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch new file mode 100644 index 0000000000..78b8975f1f --- /dev/null +++ b/target/linux/bcm53xx/patches-5.4/045-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch @@ -0,0 +1,56 @@ +From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 1 Sep 2023 12:55:49 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Specify NVRAM access and use its "et2macaddr" NVMEM cell. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230901105549.7076-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../dts/broadcom/bcm47094-dlink-dir-885l.dts | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -25,6 +25,15 @@ + <0x88000000 0x08000000>; + }; + ++ nvram@1e3f0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1e3f0000 0x10000>; ++ ++ et2macaddr: et2macaddr { ++ #nvmem-cell-cells = <1>; ++ }; ++ }; ++ + nand_controller: nand-controller@18028000 { + nand@0 { + partitions { +@@ -112,6 +121,11 @@ + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + ++&gmac0 { ++ nvmem-cells = <&et2macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +@@ -142,6 +156,8 @@ + + port@4 { + label = "wan"; ++ nvmem-cells = <&et2macaddr 3>; ++ nvmem-cell-names = "mac-address"; + }; + + port@8 { diff --git a/target/linux/bcm53xx/patches-5.4/045-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-5.4/045-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch new file mode 100644 index 0000000000..11ce7acb53 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.4/045-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch @@ -0,0 +1,44 @@ +From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 1 Sep 2023 14:43:11 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Specify NVRAM access and use its "et1macaddr" NVMEM cell. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230901124311.31156-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +@@ -25,6 +25,12 @@ + <0x88000000 0x08000000>; + }; + ++ nvram@1c080000 { ++ et1macaddr: et1macaddr { ++ #nvmem-cell-cells = <1>; ++ }; ++ }; ++ + leds { + compatible = "gpio-leds"; + +@@ -62,6 +68,11 @@ + }; + }; + ++&gmac0 { ++ nvmem-cells = <&et1macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &usb3_phy { + status = "okay"; + }; diff --git a/target/linux/bcm53xx/patches-5.4/045-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-5.4/045-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch new file mode 100644 index 0000000000..6df1e555e9 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.4/045-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch @@ -0,0 +1,57 @@ +From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 16 Sep 2023 10:30:57 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / + MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Move code added by Felix to the bcm-ns.dtsi which uses dual licensing. +That syncs more Northstar code to be based on the same licensing schema. + +This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add +profiling support"). + +Cc: Felix Fietkau +Signed-off-by: Rafał Miłecki +Acked-by: Felix Fietkau +Link: https://lore.kernel.org/r/20230916083057.10458-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 7 +++++++ + arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 ------- + 2 files changed, 7 insertions(+), 7 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -14,6 +14,13 @@ + #address-cells = <1>; + #size-cells = <1>; + ++ pmu { ++ compatible = "arm,cortex-a9-pmu"; ++ interrupts = ++ , ++ ; ++ }; ++ + chipcommon-a-bus@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -26,13 +26,6 @@ + }; + }; + +- pmu { +- compatible = "arm,cortex-a9-pmu"; +- interrupts = +- , +- ; +- }; +- + clocks { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/bcm53xx/patches-5.4/045-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-5.4/045-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch new file mode 100644 index 0000000000..66db4a291f --- /dev/null +++ b/target/linux/bcm53xx/patches-5.4/045-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch @@ -0,0 +1,104 @@ +From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 16 Sep 2023 10:58:55 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / + MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing. +That syncs more Northstar code to be based on the same licensing schema. + +This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X: +Make USB 3.0 PHY use MDIO PHY driver"). + +Cc: Vivek Unune +Signed-off-by: Rafał Miłecki +Acked-by: Vivek Unune +Link: https://lore.kernel.org/r/20230916085855.28375-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++ + arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------ + 2 files changed, 27 insertions(+), 27 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -327,6 +327,29 @@ + #address-cells = <1>; + }; + ++ mdio-mux@18003000 { ++ compatible = "mdio-mux-mmioreg", "mdio-mux"; ++ mdio-parent-bus = <&mdio>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x18003000 0x4>; ++ mux-mask = <0x200>; ++ ++ mdio@0 { ++ reg = <0x0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ usb3_phy: usb3-phy@10 { ++ compatible = "brcm,ns-ax-usb3-phy"; ++ reg = <0x10>; ++ usb3-dmp-syscon = <&usb3_dmp>; ++ #phy-cells = <0>; ++ status = "disabled"; ++ }; ++ }; ++ }; ++ + rng: rng@18004000 { + compatible = "brcm,bcm5301x-rng"; + reg = <0x18004000 0x14>; +@@ -467,6 +490,10 @@ + brcm,nand-has-wp; + }; + ++ usb3_dmp: syscon@18105000 { ++ reg = <0x18105000 0x1000>; ++ }; ++ + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -62,33 +62,6 @@ + }; + }; + +- mdio-mux@18003000 { +- compatible = "mdio-mux-mmioreg", "mdio-mux"; +- mdio-parent-bus = <&mdio>; +- #address-cells = <1>; +- #size-cells = <0>; +- reg = <0x18003000 0x4>; +- mux-mask = <0x200>; +- +- mdio@0 { +- reg = <0x0>; +- #address-cells = <1>; +- #size-cells = <0>; +- +- usb3_phy: usb3-phy@10 { +- compatible = "brcm,ns-ax-usb3-phy"; +- reg = <0x10>; +- usb3-dmp-syscon = <&usb3_dmp>; +- #phy-cells = <0>; +- status = "disabled"; +- }; +- }; +- }; +- +- usb3_dmp: syscon@18105000 { +- reg = <0x18105000 0x1000>; +- }; +- + i2c0: i2c@18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; diff --git a/target/linux/bcm53xx/patches-5.4/045-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch b/target/linux/bcm53xx/patches-5.4/045-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch new file mode 100644 index 0000000000..72e5c6b061 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.4/045-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch @@ -0,0 +1,377 @@ +From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 13 Oct 2023 12:33:13 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU + ports +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +When redescribing ports I assumed that missing "label" (like "cpu") +means switch port isn't used. That was incorrect and I realized my +change made Linux always use the first (5) CPU port (there are 3 of +them). + +While above should technically be possible it often isn't correct: +1. Non-default switch ports are often connected to Ethernet interfaces + not fully covered by vendor setup (they may miss MACs) +2. On some devices non-default ports require specifying fixed link + +This fixes network connectivity for some devices. It was reported & +tested for Netgear R8000. It also affects Linksys EA9200 with its +downstream DTS. + +Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS") +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts | 8 ++++++++ + .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm953012er.dts | 8 ++++++++ + 20 files changed, 160 insertions(+) + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +@@ -181,5 +181,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +@@ -85,5 +85,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -88,5 +88,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -122,5 +122,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -145,6 +145,14 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -145,5 +145,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +@@ -81,5 +81,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -148,5 +148,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -227,6 +227,14 @@ + label = "wan"; + }; + ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ + port@8 { + label = "cpu"; + }; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -160,6 +160,14 @@ + nvmem-cell-names = "mac-address"; + }; + ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ + port@8 { + label = "cpu"; + }; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts +@@ -192,6 +192,14 @@ + label = "wan"; + }; + ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ + port@8 { + label = "cpu"; + phy-mode = "rgmii"; +--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +@@ -107,5 +107,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +@@ -120,5 +120,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +@@ -107,5 +107,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +@@ -75,5 +75,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -147,5 +147,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +@@ -158,5 +158,13 @@ + port@5 { + label = "cpu"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts +@@ -124,6 +124,14 @@ + full-duplex; + }; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -185,6 +185,14 @@ + full-duplex; + }; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + +--- a/arch/arm/boot/dts/bcm953012er.dts ++++ b/arch/arm/boot/dts/bcm953012er.dts +@@ -84,6 +84,14 @@ + label = "cpu"; + ethernet = <&gmac0>; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + diff --git a/target/linux/bcm53xx/patches-5.4/045-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch b/target/linux/bcm53xx/patches-5.4/045-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch new file mode 100644 index 0000000000..0b2b7b36a3 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.4/045-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch @@ -0,0 +1,47 @@ +From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 13 Oct 2023 12:33:14 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 + CPU ports +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Ports 5 and 7 are disabled by default because the standard use case is +for port 8 to manage all CPU directed traffic. For experimentation +purposes however it is desirable to provide adequate properties such +that people can experiment with using different ports without having to +figure out their configuration. Some of the use cases include but are +not limited to doubling or tripling the bandwidth by leveraging the +additional ports/Ethernet MAC combinations. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20231013103314.10306-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -229,10 +229,20 @@ + + port@5 { + status = "disabled"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; + }; + + port@7 { + status = "disabled"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; + }; + + port@8 { diff --git a/target/linux/bcm53xx/patches-5.4/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-5.4/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch index 6779dfb8fe..0efb284039 100644 --- a/target/linux/bcm53xx/patches-5.4/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch +++ b/target/linux/bcm53xx/patches-5.4/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch @@ -262,7 +262,7 @@ Signed-off-by: Rafał Miłecki +}; --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -66,6 +66,32 @@ +@@ -77,6 +77,32 @@ status = "okay"; }; -- 2.30.2