From 73ac36ea14fd18ea3dc057e41b16ff31a3c0bd5a Mon Sep 17 00:00:00 2001 From: Coly Li Date: Wed, 7 Jan 2009 18:09:16 -0800 Subject: [PATCH] fix similar typos to successfull When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li Acked-by: Randy Dunlap Acked-by: Roland Dreier Cc: Jeremy Kerr Cc: Jeff Garzik Cc: Heiko Carstens Cc: Martin Schwidefsky Cc: Theodore Ts'o Cc: Mark Fasheh Cc: Vlad Yasevich Cc: Sridhar Samudrala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/abituguru-datasheet | 4 ++-- Documentation/scsi/scsi_fc_transport.txt | 4 ++-- arch/powerpc/platforms/cell/spufs/spufs.h | 2 +- drivers/infiniband/hw/nes/nes_cm.c | 2 +- drivers/isdn/hardware/eicon/debuglib.h | 2 +- drivers/isdn/hardware/eicon/os_4bri.c | 2 +- drivers/isdn/hardware/eicon/os_bri.c | 2 +- drivers/isdn/hardware/eicon/os_pri.c | 2 +- drivers/mtd/ubi/kapi.c | 2 +- drivers/net/wireless/ath5k/dma.c | 2 +- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- drivers/s390/block/dasd_3990_erp.c | 2 +- drivers/s390/block/dasd_int.h | 2 +- drivers/s390/char/tape_3590.c | 2 +- drivers/s390/cio/cio.c | 2 +- drivers/s390/cio/qdio_main.c | 2 +- fs/ext4/extents.c | 2 +- fs/ocfs2/dlmglue.c | 4 ++-- net/sctp/auth.c | 2 +- 19 files changed, 22 insertions(+), 22 deletions(-) diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index 4d184f2db0ea..d9251efdcec7 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -121,7 +121,7 @@ Once all bytes have been read data will hold 0x09, but there is no reason to test for this. Notice that the number of bytes is bank address dependent see above and below. -After completing a successfull read it is advised to put the uGuru back in +After completing a successful read it is advised to put the uGuru back in ready mode, so that it is ready for the next read / write cycle. This way if your program / driver is unloaded and later loaded again the detection algorithm described above will still work. @@ -141,7 +141,7 @@ don't ask why this is the way it is. Once DATA holds 0x01 read CMD it should hold 0xAC now. -After completing a successfull write it is advised to put the uGuru back in +After completing a successful write it is advised to put the uGuru back in ready mode, so that it is ready for the next read / write cycle. This way if your program / driver is unloaded and later loaded again the detection algorithm described above will still work. diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index 38d324d62b25..e5b071d46619 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -191,7 +191,7 @@ Vport States: This is equivalent to a driver "attach" on an adapter, which is independent of the adapter's link state. - Instantiation of the vport on the FC link via ELS traffic, etc. - This is equivalent to a "link up" and successfull link initialization. + This is equivalent to a "link up" and successful link initialization. Further information can be found in the interfaces section below for Vport Creation. @@ -320,7 +320,7 @@ Vport Creation: This is equivalent to a driver "attach" on an adapter, which is independent of the adapter's link state. - Instantiation of the vport on the FC link via ELS traffic, etc. - This is equivalent to a "link up" and successfull link initialization. + This is equivalent to a "link up" and successful link initialization. The LLDD's vport_create() function will not synchronously wait for both parts to be fully completed before returning. It must validate that the diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 15c62d3ca129..3bf908e2873a 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -314,7 +314,7 @@ extern char *isolated_loader; * we need to call spu_release(ctx) before sleeping, and * then spu_acquire(ctx) when awoken. * - * Returns with state_mutex re-acquired when successfull or + * Returns with state_mutex re-acquired when successful or * with -ERESTARTSYS and the state_mutex dropped when interrupted. */ diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index a812db243477..6ba57e91d7ab 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -2705,7 +2705,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) sizeof(struct ietf_mpa_frame)); - /* notify OF layer that accept event was successfull */ + /* notify OF layer that accept event was successful */ cm_id->add_ref(cm_id); cm_event.event = IW_CM_EVENT_ESTABLISHED; diff --git a/drivers/isdn/hardware/eicon/debuglib.h b/drivers/isdn/hardware/eicon/debuglib.h index 016410cf2273..8ea587783e14 100644 --- a/drivers/isdn/hardware/eicon/debuglib.h +++ b/drivers/isdn/hardware/eicon/debuglib.h @@ -235,7 +235,7 @@ typedef void ( * DbgOld) (unsigned short, char *, va_list) ; typedef void ( * DbgEv) (unsigned short, unsigned long, va_list) ; typedef void ( * DbgIrq) (unsigned short, int, char *, va_list) ; typedef struct _DbgHandle_ -{ char Registered ; /* driver successfull registered */ +{ char Registered ; /* driver successfully registered */ #define DBG_HANDLE_REG_NEW 0x01 /* this (new) structure */ #define DBG_HANDLE_REG_OLD 0x7f /* old structure (see below) */ char Version; /* version of this structure */ diff --git a/drivers/isdn/hardware/eicon/os_4bri.c b/drivers/isdn/hardware/eicon/os_4bri.c index 7b4ec3f60dbf..c964b8d91ada 100644 --- a/drivers/isdn/hardware/eicon/os_4bri.c +++ b/drivers/isdn/hardware/eicon/os_4bri.c @@ -997,7 +997,7 @@ diva_4bri_start_adapter(PISDN_ADAPTER IoAdapter, diva_xdi_display_adapter_features(IoAdapter->ANum); for (i = 0; i < IoAdapter->tasks; i++) { - DBG_LOG(("A(%d) %s adapter successfull started", + DBG_LOG(("A(%d) %s adapter successfully started", IoAdapter->QuadroList->QuadroAdapter[i]->ANum, (IoAdapter->tasks == 1) ? "BRI 2.0" : "4BRI")) diva_xdi_didd_register_adapter(IoAdapter->QuadroList->QuadroAdapter[i]->ANum); diff --git a/drivers/isdn/hardware/eicon/os_bri.c b/drivers/isdn/hardware/eicon/os_bri.c index f31bba5b16ff..08f01993f46b 100644 --- a/drivers/isdn/hardware/eicon/os_bri.c +++ b/drivers/isdn/hardware/eicon/os_bri.c @@ -736,7 +736,7 @@ diva_bri_start_adapter(PISDN_ADAPTER IoAdapter, IoAdapter->Properties.Features = (word) features; diva_xdi_display_adapter_features(IoAdapter->ANum); - DBG_LOG(("A(%d) BRI adapter successfull started", IoAdapter->ANum)) + DBG_LOG(("A(%d) BRI adapter successfully started", IoAdapter->ANum)) /* Register with DIDD */ diff --git a/drivers/isdn/hardware/eicon/os_pri.c b/drivers/isdn/hardware/eicon/os_pri.c index 903356547b79..5d65405c75f4 100644 --- a/drivers/isdn/hardware/eicon/os_pri.c +++ b/drivers/isdn/hardware/eicon/os_pri.c @@ -513,7 +513,7 @@ diva_pri_start_adapter(PISDN_ADAPTER IoAdapter, diva_xdi_display_adapter_features(IoAdapter->ANum); - DBG_LOG(("A(%d) PRI adapter successfull started", IoAdapter->ANum)) + DBG_LOG(("A(%d) PRI adapter successfully started", IoAdapter->ANum)) /* Register with DIDD */ diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index 5d9bcf109c13..4abbe573fa40 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -564,7 +564,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap); * @dtype: expected data type * * This function maps an un-mapped logical eraseblock @lnum to a physical - * eraseblock. This means, that after a successfull invocation of this + * eraseblock. This means, that after a successful invocation of this * function the logical eraseblock @lnum will be empty (contain only %0xFF * bytes) and be mapped to a physical eraseblock, even if an unclean reboot * happens. diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c index 7e2b1a67e5da..b65b4feb2d28 100644 --- a/drivers/net/wireless/ath5k/dma.c +++ b/drivers/net/wireless/ath5k/dma.c @@ -594,7 +594,7 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) * XXX: BMISS interrupts may occur after association. * I found this on 5210 code but it needs testing. If this is * true we should disable them before assoc and re-enable them - * after a successfull assoc + some jiffies. + * after a successful assoc + some jiffies. interrupt_mask &= ~AR5K_INT_BMISS; */ } diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 9caa96a13586..a611ad857983 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -287,7 +287,7 @@ static void zd_op_stop(struct ieee80211_hw *hw) * @skb - a sk-buffer * @flags: extra flags to set in the TX status info * @ackssi: ACK signal strength - * @success - True for successfull transmission of the frame + * @success - True for successful transmission of the frame * * This information calls ieee80211_tx_status_irqsafe() if required by the * control information. It copies the control information into the status diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index b8f9c00633f3..d82aad5224f0 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2621,7 +2621,7 @@ dasd_3990_erp_action(struct dasd_ccw_req * cqr) } } - /* double-check if current erp/cqr was successfull */ + /* double-check if current erp/cqr was successful */ if ((cqr->irb.scsw.cmd.cstat == 0x00) && (cqr->irb.scsw.cmd.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END))) { diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 05a14536c369..4a39084d9c95 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -199,7 +199,7 @@ struct dasd_ccw_req { #define DASD_CQR_ERROR 0x82 /* request is completed with error */ #define DASD_CQR_CLEAR_PENDING 0x83 /* request is clear pending */ #define DASD_CQR_CLEARED 0x84 /* request was cleared */ -#define DASD_CQR_SUCCESS 0x85 /* request was successfull */ +#define DASD_CQR_SUCCESS 0x85 /* request was successful */ /* per dasd_ccw_req flags */ diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 4005c44a404c..71605a179d65 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -801,7 +801,7 @@ tape_3590_done(struct tape_device *device, struct tape_request *request) static inline int tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request) { - DBF_EVENT(3, "Error Recovery successfull for %s\n", + DBF_EVENT(3, "Error Recovery successful for %s\n", tape_op_verbose[request->op]); return tape_3590_done(device, request); } diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 06b71823f399..659f8a791656 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -379,7 +379,7 @@ int cio_commit_config(struct subchannel *sch) if (ccode < 0) /* -EIO if msch gets a program check. */ return ccode; switch (ccode) { - case 0: /* successfull */ + case 0: /* successful */ if (stsch(sch->schid, &schib) || !css_sch_is_valid(&schib)) return -ENODEV; diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 744f928a59ea..10cb0f8726e5 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -114,7 +114,7 @@ static inline int qdio_check_ccq(struct qdio_q *q, unsigned int ccq) * @count: count of buffers to examine * @auto_ack: automatically acknowledge buffers * - * Returns the number of successfull extracted equal buffer states. + * Returns the number of successfully extracted equal buffer states. * Stops processing if a state is different from the last buffers state. */ static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index ea2ce3c0ae66..3f54db31cdc2 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2536,7 +2536,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, */ newdepth = ext_depth(inode); /* - * update the extent length after successfull insert of the + * update the extent length after successful insert of the * split extent */ orig_ex.ee_len = cpu_to_le16(ee_len - diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index f731ab491795..b0c4cadd4c45 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -1324,7 +1324,7 @@ again: goto out; } - mlog(0, "lock %s, successfull return from ocfs2_dlm_lock\n", + mlog(0, "lock %s, successful return from ocfs2_dlm_lock\n", lockres->l_name); /* At this point we've gone inside the dlm and need to @@ -2951,7 +2951,7 @@ static int ocfs2_drop_lock(struct ocfs2_super *osb, ocfs2_dlm_dump_lksb(&lockres->l_lksb); BUG(); } - mlog(0, "lock %s, successfull return from ocfs2_dlm_unlock\n", + mlog(0, "lock %s, successful return from ocfs2_dlm_unlock\n", lockres->l_name); ocfs2_wait_on_busy_lock(lockres); diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 20c576f530fa..56935bbc1496 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -489,7 +489,7 @@ int sctp_auth_init_hmacs(struct sctp_endpoint *ep, gfp_t gfp) return 0; out_err: - /* Clean up any successfull allocations */ + /* Clean up any successful allocations */ sctp_auth_destroy_hmacs(ep->auth_hmacs); return -ENOMEM; } -- 2.30.2