From 7323ef2ffab9f25aa92ea786870150baa9db7004 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 10 Feb 2022 13:48:10 +0000 Subject: [PATCH] mt7622: bpi-r64: enable using mt7531 switch irq Now that we support link-state-change interrupts, wire up MT7531 IRQ line which is connected to GPIO#53 according to the schematics [1]. As a result, PHY state no longer needs to be polled on that board. [1]: https://forum.banana-pi.org/t/bpi-r64-mt7622-schematic-diagram-public/10118 Signed-off-by: Daniel Golle --- .../180-dts-mt7622-bpi-r64-add-mt7531-irq.patch | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 target/linux/mediatek/patches-5.10/180-dts-mt7622-bpi-r64-add-mt7531-irq.patch diff --git a/target/linux/mediatek/patches-5.10/180-dts-mt7622-bpi-r64-add-mt7531-irq.patch b/target/linux/mediatek/patches-5.10/180-dts-mt7622-bpi-r64-add-mt7531-irq.patch new file mode 100644 index 0000000000..80ceb490d4 --- /dev/null +++ b/target/linux/mediatek/patches-5.10/180-dts-mt7622-bpi-r64-add-mt7531-irq.patch @@ -0,0 +1,13 @@ +--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts ++++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +@@ -160,6 +160,10 @@ + switch@0 { + compatible = "mediatek,mt7531"; + reg = <0>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ interrupt-parent = <&pio>; ++ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&pio 54 0>; + + ports { -- 2.30.2