From 72b9b721d707b7f70109eb70b2a9f22449ceba08 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Fri, 12 Nov 2021 18:56:15 +0800 Subject: [PATCH] bcm53xx: add support for Asus RT-AC88U MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Asus RT-AC88U is an AC3100 router featuring 9 Ethernet ports over the integrated Broadcom and the external Realtek switch. Hardware info: * Processor: Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz * Switch: BCM53012 in BCM4709C0KFEBG & external RTL8365MB * DDR3 RAM: 512 MB * Flash: 128 MB (ESMT F59L1G81LA-25T) * 2.4GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * 5GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * Ports: 8 Ports, 1 WAN Ports Flashing instructions: * Boot to CFE Recovery Mode by holding the reset button while power-on. * Connect to the router with an ethernet cable. * Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0. * Head to http://192.168.1.1. * Reset NVRAM. * Upload the OpenWrt image. CFE bootloader may reject flashing the image due to image integrity check. In that case, follow the instructions below. * Rename the OpenWrt image as firmware.trx. * Run a TFTP server and make it serve the firmware.trx file. * Run the URL below on a browser or curl. http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx Signed-off-by: Arınç ÜNAL [rmilecki: mark BROKEN until we sort out nvram & CFE recovery] Signed-off-by: Rafał Miłecki --- target/linux/bcm53xx/base-files/etc/board.d/02_network | 3 +++ target/linux/bcm53xx/image/Makefile | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index 6d970e1d0e3..822320c0a6a 100644 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -13,6 +13,9 @@ bcm53xx_setup_interfaces() asus,rt-ac87u) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" ;; + asus,rt-ac88u) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan" + ;; linksys,panamera) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan" ;; diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile index aadac9c3d4e..3df24013ce6 100644 --- a/target/linux/bcm53xx/image/Makefile +++ b/target/linux/bcm53xx/image/Makefile @@ -167,6 +167,15 @@ define Device/asus_rt-ac87u endef TARGET_DEVICES += asus_rt-ac87u +define Device/asus_rt-ac88u + $(call Device/asus) + DEVICE_MODEL := RT-AC88U + DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES) + ASUS_PRODUCTID := RT-AC88U + BROKEN := y +endef +TARGET_DEVICES += asus_rt-ac88u + define Device/asus_rt-n18u $(call Device/asus) DEVICE_MODEL := RT-N18U -- 2.30.2