From 72ae8314f5315e57caa82eb8c43f2606a7e6694c Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Thu, 18 Nov 2021 18:39:18 +0100 Subject: [PATCH] realtek: reset both ethernet NIC and queues Recent versions of Realtek's SDK reset both the ethernet NIC and queues (SW_NIC_RST and SW_Q_RST bits) when initialising the hardware. Furthermore, when issuing a CPU reset on the Zyxel GS1900-8 (not supported by any current driver), the networking part of the SoC is not reset. This leads to unresponsive network after the restart. By resetting both the ethernet NIC and queues, networking always comes up reliably. Suggested-by: Birger Koblitz Signed-off-by: Sander Vanheule Tested-by: Stijn Tintel --- .../files-5.10/drivers/net/ethernet/rtl838x_eth.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c index c966746f0246..dd3d3b66f970 100644 --- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c @@ -630,6 +630,7 @@ static const struct rtl838x_reg rtl931x_reg = { static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) { u32 int_saved, nbuf; + u32 reset_mask; int i, pos; pr_info("RESETTING %x, CPU_PORT %d\n", priv->family_id, priv->cpu_port); @@ -662,15 +663,17 @@ static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) sw_w32(0xffffffff, priv->r->dma_if_intr_sts); } - /* Reset NIC */ + /* Reset NIC (SW_NIC_RST) and queues (SW_Q_RST) */ if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) - sw_w32(0x4, priv->r->rst_glb_ctrl); + reset_mask = 0x6; else - sw_w32(0x8, priv->r->rst_glb_ctrl); + reset_mask = 0xc; + + sw_w32(reset_mask, priv->r->rst_glb_ctrl); do { /* Wait for reset of NIC and Queues done */ udelay(20); - } while (sw_r32(priv->r->rst_glb_ctrl) & 0xc); + } while (sw_r32(priv->r->rst_glb_ctrl) & reset_mask); mdelay(100); /* Setup Head of Line */ -- 2.30.2