From 70c75965a97799b44871249c205bad48fea9a4ae Mon Sep 17 00:00:00 2001 From: Ian Chang Date: Thu, 2 Sep 2021 17:47:20 +0800 Subject: [PATCH] mvebu: add support for iEi Puzzle-M901/Puzzle-M902 Hardware specification ---------------------- * CN9130 SoC, Quad-core ARMv8 Cortex-72 @ 2200 MHz * 4 GB DDR * 4 GB eMMC * mmcblk0 - mmcblk0p1 64M kernel_1 - mmcblk0p2 64M kernel_2 - mmcblk0p3 512M rootfs_1 - mmcblk0p4 512M rootfs_2 - mmcblk0p5 512M Reserved - mmcblk0p6 64M Reserved - mmcblk0p7 1.8G rootfs_data * 4 MB (SPI Flash) * 6 x 2.5 Gigabit ports (Puzzle-M901) - External PHY with 6 ports (AQR112R) * 6 x 2.5 Gigabit ports (Puzzle-M902) - External PHY with 6 ports (AQR112R) 3 x 10 Gigabit ports (Puzzle-M902) - External PHY with 3 ports (AQR113R) * 4 x Front panel LED * 1 x USB 3.0 * Reset button on Rear panel * UART (115200 8N1,header on PCB) Flash instructions: The original firmware is based on OpenWrt. Flash firmware using LuCI and CLI Signed-off-by: Ian Chang --- .../base-files/etc/board.d/02_network | 6 + .../base-files/lib/upgrade/emmc-puzzle.sh | 36 ++ .../base-files/lib/upgrade/platform.sh | 8 + .../boot/dts/marvell/cn9131-puzzle-m901.dts | 319 ++++++++++++ .../boot/dts/marvell/cn9132-puzzle-m902.dts | 481 ++++++++++++++++++ target/linux/mvebu/image/cortexa72.mk | 18 + 6 files changed, 868 insertions(+) mode change 100644 => 100755 target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network create mode 100755 target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh create mode 100644 target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts create mode 100644 target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network old mode 100644 new mode 100755 index dbffd00223a..f185a883477 --- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network @@ -10,6 +10,12 @@ board_config_update board=$(board_name) case "$board" in +iei,puzzle-m901) + ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0" + ;; +iei,puzzle-m902) + ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5 eth10 eth11 eth12" "eth0" + ;; marvell,armada8040-mcbin-doubleshot|\ marvell,armada8040-mcbin-singleshot) ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2" diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh new file mode 100755 index 00000000000..5e5c356ed69 --- /dev/null +++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh @@ -0,0 +1,36 @@ +platform_do_upgrade_emmc() { + local board=$(board_name) + local diskdev partdev + + export_bootdevice && export_partdevice diskdev 0 || { + v "Unable to determine upgrade device" + return 1 + } + sync + if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then + get_partitions "/dev/$diskdev" bootdisk + v "Extract boot sector from the image" + get_image_dd "$1" of=/tmp/image.bs count=1 bs=512b + get_partitions /tmp/image.bs image + fi + + #iterate over each partition from the image and write it to the boot disk + while read part start size; do + if export_partdevice partdev $part; then + if [ "$partdev" = "mmcblk0p2" ]; then + v "Writing image mmcblk0p3 for /dev/$partdev $start $size" + get_image_dd "$1" of="/dev/mmcblk0p3" ibs="512" obs=1M skip="$start" count="$size" conv=fsync + elif [ "$partdev" = "mmcblk0p1" ]; then + v "Writing image mmcblk0p1 for /dev/$partdev $start $size" + get_image_dd "$1" of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync + fi + else + v "Unable to find partition $part device, skipped." + fi + done < /tmp/partmap.image + + v "Writing new UUID to /dev/$diskdev..." + get_image_dd "$1" of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync + + sleep 1 +} diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh index 74aad434ea0..f5eb261d99d 100755 --- a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh @@ -9,6 +9,8 @@ REQUIRE_IMAGE_METADATA=1 platform_check_image() { case "$(board_name)" in + iei,puzzle-m901|\ + iei,puzzle-m902|\ marvell,armada8040-mcbin-doubleshot|\ marvell,armada8040-mcbin-singleshot) legacy_sdcard_check_image "$1" @@ -21,6 +23,10 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in + iei,puzzle-m901|\ + iei,puzzle-m902) + platform_do_upgrade_emmc "$1" + ;; marvell,armada8040-mcbin-doubleshot|\ marvell,armada8040-mcbin-singleshot) legacy_sdcard_do_upgrade "$1" @@ -32,6 +38,8 @@ platform_do_upgrade() { } platform_copy_config() { case "$(board_name)" in + iei,puzzle-m901|\ + iei,puzzle-m902|\ marvell,armada8040-mcbin-doubleshot|\ marvell,armada8040-mcbin-singleshot) legacy_sdcard_copy_config diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts new file mode 100644 index 00000000000..58e749490a1 --- /dev/null +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130.dtsi" + +#include + +/ { + model = "iEi Puzzle-M901"; + compatible = "iei,puzzle-m901", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cp1_i2c0; + i2c1 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&cp0_uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + status = "okay"; + mmc-ddr-1_8v; + mmc-hs400-1_8v; +}; + +&cp0_crypto { + status = "okay"; +}; + +&cp0_xmdio { + status = "okay"; + cp0_nbaset_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp0_nbaset_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp0_nbaset_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy2 0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy4 1>; + managed = "in-band-status"; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy5 2>; + managed = "in-band-status"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + wakeup-source; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>; +}; + +/* U55 */ +&cp0_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>, /* control */ + <0x2000000 0x1000000>; /* CS0 */ + status = "okay"; + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <40000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x1f0000>; + }; + partition@1f0000 { + label = "U-Boot ENV Factory"; + reg = <0x1f0000 0x10000>; + }; + partition@200000 { + label = "Reserved"; + reg = <0x200000 0x1f0000>; + }; + partition@3f0000 { + label = "U-Boot ENV"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + }; +}; + +/* + * Instantiate the first connected CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "okay"; +}; + +&cp1_xmdio { + status = "okay"; + cp1_nbaset_phy0: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp1_nbaset_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp1_nbaset_phy2: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy2 0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy4 1>; + managed = "in-band-status"; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy5 2>; + managed = "in-band-status"; +}; + +&cp1_sata0 { + status = "okay"; + sata-port@1 { + status = "okay"; + phys = <&cp1_comphy0 1>; + }; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + }; +}; + +&cp1_usb3_1 { + status = "okay"; + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts new file mode 100644 index 00000000000..dc4e6527f17 --- /dev/null +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts @@ -0,0 +1,481 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9130.dtsi" + +#include + +/ { + model = "iEi Puzzle-M902"; + compatible = "iei,puzzle-m902", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cp1_i2c0; + i2c1 = &cp0_i2c0; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + ethernet6 = &cp2_eth0; + ethernet7 = &cp2_eth1; + ethernet8 = &cp2_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + serial1 = &cp0_uart0; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&cp0_uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + status = "okay"; + mmc-ddr-1_8v; + mmc-hs400-1_8v; +}; + +&cp0_crypto { + status = "okay"; +}; + +&cp0_xmdio { + status = "okay"; + cp0_nbaset_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp0_nbaset_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp0_nbaset_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + phys = <&cp0_comphy2 0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy4 1>; + managed = "in-band-status"; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy1 2>; + managed = "in-band-status"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + wakeup-source; + }; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_sata0 { + status = "okay"; + sata-port@1 { + status = "okay"; + phys = <&cp0_comphy0 1>; + }; +}; + +&cp0_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + phys = <&cp0_comphy5 2>; +}; + +/* U55 */ +&cp0_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>, /* control */ + <0x2000000 0x1000000>; /* CS0 */ + status = "okay"; + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <40000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x1f0000>; + }; + partition@1f0000 { + label = "U-Boot ENV Factory"; + reg = <0x1f0000 0x10000>; + }; + partition@200000 { + label = "Reserved"; + reg = <0x200000 0x1f0000>; + }; + partition@3f0000 { + label = "U-Boot ENV"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + }; +}; + +&cp0_usb3_1 { + status = "okay"; + phys = <&cp0_comphy3 1>; + phy-names = "usb"; +}; + +/* + * Instantiate the first connected CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "okay"; +}; + +&cp1_xmdio { + status = "okay"; + cp1_nbaset_phy0: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp1_nbaset_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp1_nbaset_phy2: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + phys = <&cp1_comphy2 0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy4 1>; + managed = "in-band-status"; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy1 2>; + managed = "in-band-status"; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + }; +}; + +/* + * Instantiate the second connected CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "okay"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +&cp2_xmdio { + status = "okay"; + cp2_nbaset_phy0: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp2_nbaset_phy1: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp2_nbaset_phy2: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + phys = <&cp2_comphy2 0>; + managed = "in-band-status"; +}; + +&cp2_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp2_comphy4 1>; + managed = "in-band-status"; +}; + +&cp2_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp2_comphy1 2>; + managed = "in-band-status"; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + }; +}; diff --git a/target/linux/mvebu/image/cortexa72.mk b/target/linux/mvebu/image/cortexa72.mk index 1440c07a0b5..29727f8b9d2 100644 --- a/target/linux/mvebu/image/cortexa72.mk +++ b/target/linux/mvebu/image/cortexa72.mk @@ -43,3 +43,21 @@ define Device/marvell_macchiatobin-singleshot SUPPORTED_DEVICES := marvell,armada8040-mcbin-singleshot endef TARGET_DEVICES += marvell_macchiatobin-singleshot + +define Device/iei_puzzle-m901 + $(call Device/Default-arm64) + DEVICE_VENDOR := iEi + DEVICE_MODEL := Puzzle-M901 + SOC := cn9131 + IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata +endef +TARGET_DEVICES += iei_puzzle-m901 + +define Device/iei_puzzle-m902 + $(call Device/Default-arm64) + DEVICE_VENDOR := iEi + DEVICE_MODEL := Puzzle-M902 + SOC := cn9132 + IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata +endef +TARGET_DEVICES += iei_puzzle-m902 -- 2.30.2