From 6f112a08c1ed717a015dae190e289d53085c1bc4 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 8 Aug 2015 12:11:11 +0200 Subject: [PATCH] ARM: at91: debug: use DEBUG_UART_PHYS Instead of having to add a new configuration option each time support for new SoC is added, use CONFIG_DEBUG_UART_PHYS. For now, CONFIG_DEBUG_UART_VIRT is automatically computed. Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/Kconfig.debug | 41 ++++++++++++++--------------------- arch/arm/include/debug/at91.S | 18 ++++----------- 2 files changed, 20 insertions(+), 39 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0cfd7f947f6b..abf65b67d5e0 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -123,29 +123,23 @@ choice 0x80020000 | 0xf0020000 | UART8 0x80024000 | 0xf0024000 | UART9 - config AT91_DEBUG_LL_DBGU0 - bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12" - select DEBUG_AT91_UART + config DEBUG_AT91_UART + bool "Kernel low-level debugging on Atmel SoCs" depends on ARCH_AT91 - depends on SOC_AT91RM9200 || SOC_AT91SAM9 + help + Say Y here if you want the debug print routines to direct + their output to the serial port on atmel devices. - config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and sama5d3" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_AT91SAM9 || SOC_SAMA5 + SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT + rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU + 9261/9g10, 9rl + 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU + sama5d4 0xfc00c000 0xfb00c000 USART3 + sama5d4 0xfc069000 0xfb069000 DBGU + sama5d2 0xf8020000 0xf7020000 UART1 - config AT91_DEBUG_LL_DBGU2 - bool "Kernel low-level debugging on sama5d4" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_SAMA5 - - config AT91_DEBUG_LL_DBGU3 - bool "Kernel low-level debugging on sama5d2" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_SAMA5 + Please adjust DEBUG_UART_PHYS configuration options based on + your needs. config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" @@ -1249,10 +1243,6 @@ choice endchoice -config DEBUG_AT91_UART - bool - depends on ARCH_AT91 - config DEBUG_EXYNOS_UART bool @@ -1485,7 +1475,8 @@ config DEBUG_UART_PHYS DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 2556a8801c8c..43243be94cfc 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -9,32 +9,22 @@ * */ -#if defined(CONFIG_AT91_DEBUG_LL_DBGU0) -#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */ -#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1) -#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */ -#elif defined(CONFIG_AT91_DEBUG_LL_DBGU2) -/* On sama5d4, use USART3 as low level serial console */ -#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */ -#else -/* On sama5d2, use UART1 as low level serial console */ -#define AT91_DBGU 0xf8020000 -#endif - #ifdef CONFIG_MMU #define AT91_IO_P2V(x) ((x) - 0x01000000) #else #define AT91_IO_P2V(x) (x) #endif +#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) + #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ #define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ #define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ .macro addruart, rp, rv, tmp - ldr \rp, =AT91_DBGU @ System peripherals (phys address) - ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address) + ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address) + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address) .endm .macro senduart,rd,rx -- 2.30.2