From 6ee3680614047f7732731ebbaac946a93ab4f693 Mon Sep 17 00:00:00 2001 From: Dan Brown Date: Wed, 12 May 2021 14:48:01 +0200 Subject: [PATCH] octeon: add new target and support for Ubiquiti EdgeRouter 6P Ubiquiti EdgeRouter 6P is 6 port router with similar specifications as the EdgeRouter 4, support for which was added in commit dd651e54cc5eadba480a56a7d2c18471e560f491 There are five 10/100/1000 Mbps RJ/Copper ports and one 1000 Mbps SFP port. SoC: Octeon Cavium 7130 (Cavium 3) at 1000MHz Memory: 1GiB DDR3 Flash: 2x2M chips with uboots (chainloaded) + 512K eeprom LEDs: 1x for power status (white/blue, controllable) and 6x for ethernet and SFP ports (no control over them) Buttons: 1x Reset Serial: 1x RJ45 port on front panel. 115200 baud, 8N1 USB: 1x USB3.0 on front panel MII: 1x QSGMII from SoC PHY: 1x Vitesse VSC8504 of which 4 ports are used (phys 4-7) 1x Vitesse VSC8514 of which 2 ports are used (phys 8-9) Network port mapping - eth0 on device maps to lan0 and phy5 - eth1 on device maps to lan1 and phy6 - eth2 on device maps to lan2 and phy7 - eth3 on device maps to lan3 and phy8 - eth4 on device maps to lan4 and phy9 - eth5 (SFP) on device maps to lan5 and phy4 What is not working: - There is no port status available before it goes up - SFP have no additional status and presented as no different from eth - Power-over-ethernet (passive) support has not been tested How to flash the firmware: - copy openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin and openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar to USB flash drive that is formatted to vfat/fat32 - connect USB flash drive to EdgeRouter 6P front USB port - connect serial cable using front RJ45 port (115200 baud, 8N1) - connect power to cable to EdgeRouter 6P - connect terminal to the console to see uboot boot process - interrupt boot by pressing button(s) on your keyboard to log in to the uboot - detect usb connected flash drives by typing to the console: usb start - after drive is detected load initramfs+kernel to the memory by typing: fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin - after initramfs+kernel is loaded to the memory load it by typing: bootoctlinux 0 numcores=4 endbootargs mem=0 - boot process should finish and you will be greeted with console after pressing enter - create directory to mount usb flash drive to by typing: mkdir /tmp/sda - mount flash drive to that directory by typing: mount /dev/sda1 /tmp/sda - flash firmware to router internal storage by typing: sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar - device will reboot and after it gets up you will have edgerouter 6p running openwrt Signed-off-by: Dan Brown [reorder/squash patches, move ethernet@0 to DTS, share image setup] Signed-off-by: Adrian Schmutzler --- .../octeon/base-files/etc/board.d/01_network | 3 + .../base-files/lib/preinit/79_move_config | 3 +- .../octeon/base-files/lib/upgrade/platform.sh | 9 ++- .../cn7130_ubnt_edgerouter-6p.dts | 60 +++++++++++++++++++ target/linux/octeon/image/Makefile | 17 +++++- 5 files changed, 85 insertions(+), 7 deletions(-) create mode 100644 target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts diff --git a/target/linux/octeon/base-files/etc/board.d/01_network b/target/linux/octeon/base-files/etc/board.d/01_network index e62d3c28bf..194faeaad9 100644 --- a/target/linux/octeon/base-files/etc/board.d/01_network +++ b/target/linux/octeon/base-files/etc/board.d/01_network @@ -13,6 +13,9 @@ itus,shield-router) ubnt,edgerouter-4) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "lan0" ;; +ubnt,edgerouter-6p) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "lan0" + ;; *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; diff --git a/target/linux/octeon/base-files/lib/preinit/79_move_config b/target/linux/octeon/base-files/lib/preinit/79_move_config index 5a84e6f18a..ae155a3c5c 100644 --- a/target/linux/octeon/base-files/lib/preinit/79_move_config +++ b/target/linux/octeon/base-files/lib/preinit/79_move_config @@ -21,7 +21,8 @@ octeon_move_config() { itus,shield-router) move_config "/dev/mmcblk1p1" ;; - ubnt,edgerouter-4) + ubnt,edgerouter-4 | \ + ubnt,edgerouter-6p) move_config "/dev/mmcblk0p1" ;; esac diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh b/target/linux/octeon/base-files/lib/upgrade/platform.sh index ad5baef4a1..255699bb31 100755 --- a/target/linux/octeon/base-files/lib/upgrade/platform.sh +++ b/target/linux/octeon/base-files/lib/upgrade/platform.sh @@ -29,7 +29,8 @@ platform_copy_config() { cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE" umount /mnt ;; - ubnt,edgerouter-4) + ubnt,edgerouter-4 | \ + ubnt,edgerouter-6p) mount -t vfat /dev/mmcblk0p1 /mnt cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE" umount /mnt @@ -84,7 +85,8 @@ platform_do_upgrade() { [ -b "${rootfs}" ] || return 1 case "$board" in er | \ - ubnt,edgerouter-4) + ubnt,edgerouter-4 | \ + ubnt,edgerouter-6p) kernel=mmcblk0p1 ;; erlite) @@ -114,7 +116,8 @@ platform_check_image() { er | \ erlite | \ itus,shield-router | \ - ubnt,edgerouter-4) + ubnt,edgerouter-4 | \ + ubnt,edgerouter-6p) local kernel_length=$(tar xf $tar_file $board_dir/kernel -O | wc -c 2> /dev/null) local rootfs_length=$(tar xf $tar_file $board_dir/root -O | wc -c 2> /dev/null) [ "$kernel_length" = 0 -o "$rootfs_length" = 0 ] && { diff --git a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts new file mode 100644 index 0000000000..7d31885928 --- /dev/null +++ b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "cn7130_ubnt_edgerouter-e300.dtsi" + +/ { + compatible = "ubnt,edgerouter-6p", "cavium,cn7130"; + model = "Ubiquiti EdgeRouter 6P"; +}; + +&smi0 { + phy8: ethernet-phy@8 { + device_type = "ethernet-phy"; + interrupts = <17 8>; + interrupt-parent = <&gpio>; + compatible = "vitesse,vsc8514", "ethernet-phy-ieee802.3-c22"; + reg = <8>; + }; + + phy9: ethernet-phy@9 { + device_type = "ethernet-phy"; + interrupts = <17 8>; + interrupt-parent = <&gpio>; + compatible = "vitesse,vsc8514", "ethernet-phy-ieee802.3-c22"; + reg = <9>; + }; +}; + +&pip { + interface@0 { + ethernet@0 { + label = "lan5"; + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy4>; + mtd-mac-address = <&eeprom 0>; + }; + }; + + interface@1 { + status = "okay"; + + ethernet@0 { + label = "lan3"; + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy8>; + mtd-mac-address = <&eeprom 0>; + mtd-mac-address-increment = <(4)>; + }; + + ethernet@1 { + label = "lan4"; + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy9>; + mtd-mac-address = <&eeprom 0>; + mtd-mac-address-increment = <(5)>; + }; + }; +}; diff --git a/target/linux/octeon/image/Makefile b/target/linux/octeon/image/Makefile index 11da22df3b..f77159e1f9 100644 --- a/target/linux/octeon/image/Makefile +++ b/target/linux/octeon/image/Makefile @@ -51,17 +51,28 @@ define Device/ubnt_edgerouter endef TARGET_DEVICES += ubnt_edgerouter -define Device/ubnt_edgerouter-4 +define Device/ubnt_edgerouter-e300 DEVICE_VENDOR := Ubiquiti - DEVICE_MODEL := EdgeRouter 4 - DEVICE_DTS := cn7130_ubnt_edgerouter-4 DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-leds-gpio kmod-of-mdio kmod-sfp kmod-usb3 kmod-usb-dwc3 kmod-usb-storage-uas KERNEL := kernel-bin | patch-cmdline | append-dtb-to-elf KERNEL_DEPENDS := $$(wildcard $(DTS_DIR)/$(DEVICE_DTS).dts) CMDLINE := root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait endef + +define Device/ubnt_edgerouter-4 + $(Device/ubnt_edgerouter-e300) + DEVICE_MODEL := EdgeRouter 4 + DEVICE_DTS := cn7130_ubnt_edgerouter-4 +endef TARGET_DEVICES += ubnt_edgerouter-4 +define Device/ubnt_edgerouter-6p + $(Device/ubnt_edgerouter-e300) + DEVICE_MODEL := EdgeRouter 6P + DEVICE_DTS := cn7130_ubnt_edgerouter-6p +endef +TARGET_DEVICES += ubnt_edgerouter-6p + ERLITE_CMDLINE:=-mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait define Device/ubnt_edgerouter-lite DEVICE_VENDOR := Ubiquiti -- 2.30.2