From 6e51b0e4913ca2c93059f73ca477ca30ea95b6a0 Mon Sep 17 00:00:00 2001 From: Erik Stromdahl Date: Thu, 26 Sep 2019 17:24:27 +0300 Subject: [PATCH] ath10k: add QCA9377 sdio hw_param item Add hardware parameters for QCA9377 sdio devices, it's now properly supported. Signed-off-by: Erik Stromdahl Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 27 ++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 3 +++ 2 files changed, 30 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index f561b8b4660e..70f3bae92a85 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -540,6 +540,33 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .fw_diag_ce_download = true, .tx_stats_over_pktlog = false, }, + { + .id = QCA9377_HW_1_1_DEV_VERSION, + .dev_id = QCA9377_1_0_DEVICE_ID, + .bus = ATH10K_BUS_SDIO, + .name = "qca9377 hw1.1 sdio", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 19, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA9377_HW_1_0_FW_DIR, + .board = QCA9377_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9377_BOARD_DATA_SZ, + .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, + }, + .hw_ops = &qca6174_ops, + .hw_clk = qca6174_clk, + .target_cpu_freq = 176000000, + .decap_align_bytes = 4, + .n_cipher_suites = 8, + .num_peers = TARGET_QCA9377_HL_NUM_PEERS, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .uart_pin_workaround = true, + }, { .id = QCA4019_HW_1_0_DEV_VERSION, .dev_id = 0, diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 775fd62fb92d..970c736ac6bb 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -774,6 +774,9 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw, #define TARGET_HL_TLV_AST_SKID_LIMIT 16 #define TARGET_HL_TLV_NUM_WDS_ENTRIES 2 +/* Target specific defines for QCA9377 high latency firmware */ +#define TARGET_QCA9377_HL_NUM_PEERS 15 + /* Diagnostic Window */ #define CE_DIAG_PIPE 7 -- 2.30.2