From 6d877688ef411313c94aa3c83c7473fbec6db32c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 11 Jul 2007 12:54:55 -0600 Subject: [PATCH] [SCSI] Clean up scsi_add_lun a bit This patch tidies up scsi_add_lun a bit. I rewrote the kerneldoc to match the actual parameters, moved the check for RBC and MMC REPORT_LUN devices away from the switch(), changed the setup of sdev->type to account for BLIST_ISROM, moved the check for BLIST_NO_ULD_ATTACH further down in the function, removed a bogus comment and fixed some whitespace issues. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 64 ++++++++++++++++------------------------ 1 file changed, 26 insertions(+), 38 deletions(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 5df28e2fd3bb..0827df2ebb6d 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -694,16 +694,14 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, /** * scsi_add_lun - allocate and fully initialze a scsi_device - * @sdevscan: holds information to be stored in the new scsi_device - * @sdevnew: store the address of the newly allocated scsi_device + * @sdev: holds information to be stored in the new scsi_device * @inq_result: holds the result of a previous INQUIRY to the LUN * @bflags: black/white list flag + * @async: 1 if this device is being scanned asynchronously * * Description: - * Allocate and initialize a scsi_device matching sdevscan. Optionally - * set fields based on values in *@bflags. If @sdevnew is not - * NULL, store the address of the new scsi_device in *@sdevnew (needed - * when scanning a particular LUN). + * Initialize the scsi_device @sdev. Optionally set fields based + * on values in *@bflags. * * Return: * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device @@ -743,25 +741,15 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, sdev->rev = (char *) (sdev->inquiry + 32); if (*bflags & BLIST_ISROM) { - /* - * It would be better to modify sdev->type, and set - * sdev->removable; this can now be done since - * print_inquiry has gone away. - */ - inq_result[0] = TYPE_ROM; - inq_result[1] |= 0x80; /* removable */ - } else if (*bflags & BLIST_NO_ULD_ATTACH) - sdev->no_uld_attach = 1; + sdev->type = TYPE_ROM; + sdev->removable = 1; + } else { + sdev->type = (inq_result[0] & 0x1f); + sdev->removable = (inq_result[1] & 0x80) >> 7; + } - switch (sdev->type = (inq_result[0] & 0x1f)) { + switch (sdev->type) { case TYPE_RBC: - /* RBC devices can return SCSI-3 compliance and yet - * still not support REPORT LUNS, so make them act as - * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is - * specifically set */ - if ((*bflags & BLIST_REPORTLUN2) == 0) - *bflags |= BLIST_NOREPORTLUN; - /* fall through */ case TYPE_TAPE: case TYPE_DISK: case TYPE_PRINTER: @@ -775,13 +763,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, sdev->writeable = 1; break; case TYPE_ROM: - /* MMC devices can return SCSI-3 compliance and yet - * still not support REPORT LUNS, so make them act as - * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is - * specifically set */ - if ((*bflags & BLIST_REPORTLUN2) == 0) - *bflags |= BLIST_NOREPORTLUN; - /* fall through */ case TYPE_WORM: sdev->writeable = 0; break; @@ -789,6 +770,15 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type); } + if (sdev->type == TYPE_RBC || sdev->type == TYPE_ROM) { + /* RBC and MMC devices can return SCSI-3 compliance and yet + * still not support REPORT LUNS, so make them act as + * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is + * specifically set */ + if ((*bflags & BLIST_REPORTLUN2) == 0) + *bflags |= BLIST_NOREPORTLUN; + } + /* * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI * spec says: The device server is capable of supporting the @@ -806,12 +796,11 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, */ sdev->inq_periph_qual = (inq_result[0] >> 5) & 7; - sdev->removable = (0x80 & inq_result[1]) >> 7; sdev->lockable = sdev->removable; sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2); - if (sdev->scsi_level >= SCSI_3 || (sdev->inquiry_len > 56 && - inq_result[56] & 0x04)) + if (sdev->scsi_level >= SCSI_3 || + (sdev->inquiry_len > 56 && inq_result[56] & 0x04)) sdev->ppr = 1; if (inq_result[7] & 0x60) sdev->wdtr = 1; @@ -824,13 +813,10 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, sdev->inq_periph_qual, inq_result[2] & 0x07, (inq_result[3] & 0x0f) == 1 ? " CCS" : ""); - /* - * End sysfs code. - */ - if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) && !(*bflags & BLIST_NOTQ)) sdev->tagged_supported = 1; + /* * Some devices (Texel CD ROM drives) have handshaking problems * when used with the Seagate controllers. borken is initialized @@ -839,6 +825,9 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, if ((*bflags & BLIST_BORKEN) == 0) sdev->borken = 0; + if (*bflags & BLIST_NO_ULD_ATTACH) + sdev->no_uld_attach = 1; + /* * Apparently some really broken devices (contrary to the SCSI * standards) need to be selected without asserting ATN @@ -863,7 +852,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, if (*bflags & BLIST_SINGLELUN) sdev->single_lun = 1; - sdev->use_10_for_rw = 1; if (*bflags & BLIST_MS_SKIP_PAGE_08) -- 2.30.2